1 /* $NetBSD: scsi_sense.c,v 1.3 1999/03/15 23:20:23 thorpej Exp $ */ 2 3 /*- 4 * Copyright (c) 1998 The NetBSD Foundation, Inc. 5 * All rights reserved. 6 * 7 * This code is derived from software contributed to The NetBSD Foundation 8 * by Charles M. Hannum; Jason R. Thorpe of the Numerical Aerospace 9 * Simulation Facility, NASA Ames Research Center. 10 * 11 * Redistribution and use in source and binary forms, with or without 12 * modification, are permitted provided that the following conditions 13 * are met: 14 * 1. Redistributions of source code must retain the above copyright 15 * notice, this list of conditions and the following disclaimer. 16 * 2. Redistributions in binary form must reproduce the above copyright 17 * notice, this list of conditions and the following disclaimer in the 18 * documentation and/or other materials provided with the distribution. 19 * 3. All advertising materials mentioning features or use of this software 20 * must display the following acknowledgement: 21 * This product includes software developed by the NetBSD 22 * Foundation, Inc. and its contributors. 23 * 4. Neither the name of The NetBSD Foundation nor the names of its 24 * contributors may be used to endorse or promote products derived 25 * from this software without specific prior written permission. 26 * 27 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS 28 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED 29 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR 30 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS 31 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 32 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 33 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 34 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 35 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 36 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE 37 * POSSIBILITY OF SUCH DAMAGE. 38 */ 39 40 /* 41 * SCSI sense interpretation. Lifted from src/sys/dev/scsipi/scsi_verbose.c, 42 * and modified for userland. 43 * 44 * XXX THESE SHOULD BE IN A LIBRARY! 45 */ 46 47 #include <sys/param.h> 48 #include <sys/device.h> 49 #include <sys/scsiio.h> 50 #include <stdio.h> 51 #include <string.h> 52 53 #include <dev/scsipi/scsipi_all.h> 54 #include <dev/scsipi/scsi_all.h> 55 #include <dev/scsipi/scsipiconf.h> 56 #include <dev/scsipi/scsiconf.h> 57 58 #include "extern.h" 59 60 static const char *sense_keys[16] = { 61 "No Additional Sense", 62 "Recovered Error", 63 "Not Ready", 64 "Media Error", 65 "Hardware Error", 66 "Illegal Request", 67 "Unit Attention", 68 "Write Protected", 69 "Blank Check", 70 "Vendor Unique", 71 "Copy Aborted", 72 "Aborted Command", 73 "Equal Error", 74 "Volume Overflow", 75 "Miscompare Error", 76 "Reserved" 77 }; 78 79 static const struct { 80 unsigned char asc; 81 unsigned char ascq; 82 const char *description; 83 } adesc[] = { 84 { 0x00, 0x00, "No Additional Sense Information" }, 85 { 0x00, 0x01, "Filemark Detected" }, 86 { 0x00, 0x02, "End-Of-Partition/Medium Detected" }, 87 { 0x00, 0x03, "Setmark Detected" }, 88 { 0x00, 0x04, "Beginning-Of-Partition/Medium Detected" }, 89 { 0x00, 0x05, "End-Of-Data Detected" }, 90 { 0x00, 0x06, "I/O Process Terminated" }, 91 { 0x00, 0x11, "Audio Play Operation In Progress" }, 92 { 0x00, 0x12, "Audio Play Operation Paused" }, 93 { 0x00, 0x13, "Audio Play Operation Successfully Completed" }, 94 { 0x00, 0x14, "Audio Play Operation Stopped Due to Error" }, 95 { 0x00, 0x15, "No Current Audio Status To Return" }, 96 { 0x01, 0x00, "No Index/Sector Signal" }, 97 { 0x02, 0x00, "No Seek Complete" }, 98 { 0x03, 0x00, "Peripheral Device Write Fault" }, 99 { 0x03, 0x01, "No Write Current" }, 100 { 0x03, 0x02, "Excessive Write Errors" }, 101 { 0x04, 0x00, "Logical Unit Not Ready, Cause Not Reportable" }, 102 { 0x04, 0x01, "Logical Unit Is in Process Of Becoming Ready" }, 103 { 0x04, 0x02, "Logical Unit Not Ready, Initialization Command Required" }, 104 { 0x04, 0x03, "Logical Unit Not Ready, Manual Intervention Required" }, 105 { 0x04, 0x04, "Logical Unit Not Ready, Format In Progress" }, 106 { 0x05, 0x00, "Logical Unit Does Not Respond To Selection" }, 107 { 0x06, 0x00, "No Reference Position Found" }, 108 { 0x07, 0x00, "Multiple Peripheral Devices Selected" }, 109 { 0x08, 0x00, "Logical Unit Communication Failure" }, 110 { 0x08, 0x01, "Logical Unit Communication Timeout" }, 111 { 0x08, 0x02, "Logical Unit Communication Parity Error" }, 112 { 0x09, 0x00, "Track Following Error" }, 113 { 0x09, 0x01, "Tracking Servo Failure" }, 114 { 0x09, 0x02, "Focus Servo Failure" }, 115 { 0x09, 0x03, "Spindle Servo Failure" }, 116 { 0x0A, 0x00, "Error Log Overflow" }, 117 { 0x0C, 0x00, "Write Error" }, 118 { 0x0C, 0x01, "Write Error Recovered with Auto Reallocation" }, 119 { 0x0C, 0x02, "Write Error - Auto Reallocate Failed" }, 120 { 0x10, 0x00, "ID CRC Or ECC Error" }, 121 { 0x11, 0x00, "Unrecovered Read Error" }, 122 { 0x11, 0x01, "Read Retried Exhausted" }, 123 { 0x11, 0x02, "Error Too Long To Correct" }, 124 { 0x11, 0x03, "Multiple Read Errors" }, 125 { 0x11, 0x04, "Unrecovered Read Error - Auto Reallocate Failed" }, 126 { 0x11, 0x05, "L-EC Uncorrectable Error" }, 127 { 0x11, 0x06, "CIRC Unrecovered Error" }, 128 { 0x11, 0x07, "Data Resynchronization Error" }, 129 { 0x11, 0x08, "Incomplete Block Found" }, 130 { 0x11, 0x09, "No Gap Found" }, 131 { 0x11, 0x0A, "Miscorrected Error" }, 132 { 0x11, 0x0B, "Uncorrected Read Error - Recommend Reassignment" }, 133 { 0x11, 0x0C, "Uncorrected Read Error - Recommend Rewrite the Data" }, 134 { 0x12, 0x00, "Address Mark Not Found for ID Field" }, 135 { 0x13, 0x00, "Address Mark Not Found for Data Field" }, 136 { 0x14, 0x00, "Recorded Entity Not Found" }, 137 { 0x14, 0x01, "Record Not Found" }, 138 { 0x14, 0x02, "Filemark or Setmark Not Found" }, 139 { 0x14, 0x03, "End-Of-Data Not Found" }, 140 { 0x14, 0x04, "Block Sequence Error" }, 141 { 0x15, 0x00, "Random Positioning Error" }, 142 { 0x15, 0x01, "Mechanical Positioning Error" }, 143 { 0x15, 0x02, "Positioning Error Detected By Read of Medium" }, 144 { 0x16, 0x00, "Data Synchronization Mark Error" }, 145 { 0x17, 0x00, "Recovered Data With No Error Correction Applied" }, 146 { 0x17, 0x01, "Recovered Data With Retries" }, 147 { 0x17, 0x02, "Recovered Data With Positive Head Offset" }, 148 { 0x17, 0x03, "Recovered Data With Negative Head Offset" }, 149 { 0x17, 0x04, "Recovered Data With Retries and/or CIRC Applied" }, 150 { 0x17, 0x05, "Recovered Data Using Previous Sector ID" }, 151 { 0x17, 0x06, "Recovered Data Without ECC - Data Auto-Reallocated" }, 152 { 0x17, 0x07, "Recovered Data Without ECC - Recommend Reassignment" }, 153 { 0x17, 0x08, "Recovered Data Without ECC - Recommend Rewrite" }, 154 { 0x18, 0x00, "Recovered Data With Error Correction Applied" }, 155 { 0x18, 0x01, "Recovered Data With Error Correction & Retries Applied" }, 156 { 0x18, 0x02, "Recovered Data - Data Auto-Reallocated" }, 157 { 0x18, 0x03, "Recovered Data With CIRC" }, 158 { 0x18, 0x04, "Recovered Data With LEC" }, 159 { 0x18, 0x05, "Recovered Data - Recommend Reassignment" }, 160 { 0x18, 0x06, "Recovered Data - Recommend Rewrite" }, 161 { 0x19, 0x00, "Defect List Error" }, 162 { 0x19, 0x01, "Defect List Not Available" }, 163 { 0x19, 0x02, "Defect List Error in Primary List" }, 164 { 0x19, 0x03, "Defect List Error in Grown List" }, 165 { 0x1A, 0x00, "Parameter List Length Error" }, 166 { 0x1B, 0x00, "Synchronous Data Transfer Error" }, 167 { 0x1C, 0x00, "Defect List Not Found" }, 168 { 0x1C, 0x01, "Primary Defect List Not Found" }, 169 { 0x1C, 0x02, "Grown Defect List Not Found" }, 170 { 0x1D, 0x00, "Miscompare During Verify Operation" }, 171 { 0x1E, 0x00, "Recovered ID with ECC" }, 172 { 0x20, 0x00, "Invalid Command Operation Code" }, 173 { 0x21, 0x00, "Logical Block Address Out of Range" }, 174 { 0x21, 0x01, "Invalid Element Address" }, 175 { 0x22, 0x00, "Illegal Function (Should 20 00, 24 00, or 26 00)" }, 176 { 0x24, 0x00, "Illegal Field in CDB" }, 177 { 0x25, 0x00, "Logical Unit Not Supported" }, 178 { 0x26, 0x00, "Invalid Field In Parameter List" }, 179 { 0x26, 0x01, "Parameter Not Supported" }, 180 { 0x26, 0x02, "Parameter Value Invalid" }, 181 { 0x26, 0x03, "Threshold Parameters Not Supported" }, 182 { 0x27, 0x00, "Write Protected" }, 183 { 0x28, 0x00, "Not Ready To Ready Transition (Medium May Have Changed)" }, 184 { 0x28, 0x01, "Import Or Export Element Accessed" }, 185 { 0x29, 0x00, "Power On, Reset, or Bus Device Reset Occurred" }, 186 { 0x2A, 0x00, "Parameters Changed" }, 187 { 0x2A, 0x01, "Mode Parameters Changed" }, 188 { 0x2A, 0x02, "Log Parameters Changed" }, 189 { 0x2B, 0x00, "Copy Cannot Execute Since Host Cannot Disconnect" }, 190 { 0x2C, 0x00, "Command Sequence Error" }, 191 { 0x2C, 0x01, "Too Many Windows Specified" }, 192 { 0x2C, 0x02, "Invalid Combination of Windows Specified" }, 193 { 0x2D, 0x00, "Overwrite Error On Update In Place" }, 194 { 0x2F, 0x00, "Commands Cleared By Another Initiator" }, 195 { 0x30, 0x00, "Incompatible Medium Installed" }, 196 { 0x30, 0x01, "Cannot Read Medium - Unknown Format" }, 197 { 0x30, 0x02, "Cannot Read Medium - Incompatible Format" }, 198 { 0x30, 0x03, "Cleaning Cartridge Installed" }, 199 { 0x31, 0x00, "Medium Format Corrupted" }, 200 { 0x31, 0x01, "Format Command Failed" }, 201 { 0x32, 0x00, "No Defect Spare Location Available" }, 202 { 0x32, 0x01, "Defect List Update Failure" }, 203 { 0x33, 0x00, "Tape Length Error" }, 204 { 0x36, 0x00, "Ribbon, Ink, or Toner Failure" }, 205 { 0x37, 0x00, "Rounded Parameter" }, 206 { 0x39, 0x00, "Saving Parameters Not Supported" }, 207 { 0x3A, 0x00, "Medium Not Present" }, 208 { 0x3B, 0x00, "Positioning Error" }, 209 { 0x3B, 0x01, "Tape Position Error At Beginning-of-Medium" }, 210 { 0x3B, 0x02, "Tape Position Error At End-of-Medium" }, 211 { 0x3B, 0x03, "Tape or Electronic Vertical Forms Unit Not Ready" }, 212 { 0x3B, 0x04, "Slew Failure" }, 213 { 0x3B, 0x05, "Paper Jam" }, 214 { 0x3B, 0x06, "Failed To Sense Top-Of-Form" }, 215 { 0x3B, 0x07, "Failed To Sense Bottom-Of-Form" }, 216 { 0x3B, 0x08, "Reposition Error" }, 217 { 0x3B, 0x09, "Read Past End Of Medium" }, 218 { 0x3B, 0x0A, "Read Past Begining Of Medium" }, 219 { 0x3B, 0x0B, "Position Past End Of Medium" }, 220 { 0x3B, 0x0C, "Position Past Beginning Of Medium" }, 221 { 0x3B, 0x0D, "Medium Destination Element Full" }, 222 { 0x3B, 0x0E, "Medium Source Element Empty" }, 223 { 0x3D, 0x00, "Invalid Bits In IDENTIFY Message" }, 224 { 0x3E, 0x00, "Logical Unit Has Not Self-Configured Yet" }, 225 { 0x3F, 0x00, "Target Operating Conditions Have Changed" }, 226 { 0x3F, 0x01, "Microcode Has Changed" }, 227 { 0x3F, 0x02, "Changed Operating Definition" }, 228 { 0x3F, 0x03, "INQUIRY Data Has Changed" }, 229 { 0x40, 0x00, "RAM FAILURE (Should Use 40 NN)" }, 230 { 0x41, 0x00, "Data Path FAILURE (Should Use 40 NN)" }, 231 { 0x42, 0x00, "Power-On or Self-Test FAILURE (Should Use 40 NN)" }, 232 { 0x43, 0x00, "Message Error" }, 233 { 0x44, 0x00, "Internal Target Failure" }, 234 { 0x45, 0x00, "Select Or Reselect Failure" }, 235 { 0x46, 0x00, "Unsuccessful Soft Reset" }, 236 { 0x47, 0x00, "SCSI Parity Error" }, 237 { 0x48, 0x00, "INITIATOR DETECTED ERROR Message Received" }, 238 { 0x49, 0x00, "Invalid Message Error" }, 239 { 0x4A, 0x00, "Command Phase Error" }, 240 { 0x4B, 0x00, "Data Phase Error" }, 241 { 0x4C, 0x00, "Logical Unit Failed Self-Configuration" }, 242 { 0x4E, 0x00, "Overlapped Commands Attempted" }, 243 { 0x50, 0x00, "Write Append Error" }, 244 { 0x50, 0x01, "Write Append Position Error" }, 245 { 0x50, 0x01, "Write Append Position Error" }, 246 { 0x50, 0x02, "Position Error Related To Timing" }, 247 { 0x51, 0x00, "Erase Failure" }, 248 { 0x52, 0x00, "Cartridge Fault" }, 249 { 0x53, 0x00, "Media Load or Eject Failed" }, 250 { 0x53, 0x01, "Unload Tape Failure" }, 251 { 0x53, 0x02, "Medium Removal Prevented" }, 252 { 0x54, 0x00, "SCSI To Host System Interface Failure" }, 253 { 0x55, 0x00, "System Resource Failure" }, 254 { 0x57, 0x00, "Unable To Recover Table-Of-Contents" }, 255 { 0x58, 0x00, "Generation Does Not Exist" }, 256 { 0x59, 0x00, "Updated Block Read" }, 257 { 0x5A, 0x00, "Operator Request or State Change Input (Unspecified)" }, 258 { 0x5A, 0x01, "Operator Medium Removal Requested" }, 259 { 0x5A, 0x02, "Operator Selected Write Protect" }, 260 { 0x5A, 0x03, "Operator Selected Write Permit" }, 261 { 0x5B, 0x00, "Log Exception" }, 262 { 0x5B, 0x01, "Threshold Condition Met" }, 263 { 0x5B, 0x02, "Log Counter At Maximum" }, 264 { 0x5B, 0x03, "Log List Codes Exhausted" }, 265 { 0x5C, 0x00, "RPL Status Change" }, 266 { 0x5C, 0x01, "Spindles Synchronized" }, 267 { 0x5C, 0x02, "Spindles Not Synchronized" }, 268 { 0x60, 0x00, "Lamp Failure" }, 269 { 0x61, 0x00, "Video Acquisition Error" }, 270 { 0x61, 0x01, "Unable To Acquire Video" }, 271 { 0x61, 0x02, "Out Of Focus" }, 272 { 0x62, 0x00, "Scan Head Positioning Error" }, 273 { 0x63, 0x00, "End Of User Area Encountered On This Track" }, 274 { 0x64, 0x00, "Illegal Mode For This Track" }, 275 { 0x00, 0x00, NULL } 276 }; 277 278 static void asc2ascii __P((unsigned char, unsigned char, char *, size_t)); 279 280 static void 281 asc2ascii(asc, ascq, result, reslen) 282 unsigned char asc, ascq; 283 char *result; 284 size_t reslen; 285 { 286 int i = 0; 287 288 while (adesc[i].description != NULL) { 289 if (adesc[i].asc == asc && adesc[i].ascq == ascq) 290 break; 291 i++; 292 } 293 if (adesc[i].description == NULL) { 294 if (asc == 0x40 && ascq != 0) 295 (void) snprintf(result, reslen, 296 "Diagnostic Failure on Component 0x%02x", 297 ascq & 0xff); 298 else 299 (void) snprintf(result, reslen, 300 "ASC 0x%02x ASCQ 0x%02x", 301 asc & 0xff, ascq & 0xff); 302 } else { 303 (void) strncpy(result, adesc[i].description, reslen); 304 result[reslen - 1] = '\0'; /* ensure termination */ 305 } 306 } 307 308 void 309 scsi_print_sense_data(s, slen, verbosity) 310 const unsigned char *s; 311 int slen, verbosity; 312 { 313 int32_t info; 314 int i, j, k; 315 char sbs[132], *cp; 316 317 /* 318 * Basics - print out SENSE KEY 319 */ 320 printf(" SENSE KEY: %s", scsi_decode_sense(s, 0, sbs, sizeof(sbs))); 321 322 /* 323 * Print out, unqualified but aligned, FMK, EOM and ILI status. 324 */ 325 if (s[2] & 0xe0) { 326 char pad; 327 printf("\n "); 328 pad = ' '; 329 if (s[2] & SSD_FILEMARK) { 330 printf("%c Filemark Detected", pad); 331 pad = ','; 332 } 333 if (s[2] & SSD_EOM) { 334 printf("%c EOM Detected", pad); 335 pad = ','; 336 } 337 if (s[2] & SSD_ILI) 338 printf("%c Incorrect Length Indicator Set", pad); 339 } 340 341 /* 342 * Now we should figure out, based upon device type, how 343 * to format the information field. Unfortunately, that's 344 * not convenient here, so we'll print it as a signed 345 * 32 bit integer. 346 */ 347 info = _4btol(&s[3]); 348 if (info) 349 printf("\n INFO FIELD: %d", info); 350 351 /* 352 * Now we check additional length to see whether there is 353 * more information to extract. 354 */ 355 356 /* enough for command specific information? */ 357 if (((unsigned int) s[7]) < 4) { 358 printf("\n"); 359 return; 360 } 361 info = _4btol(&s[8]); 362 if (info) 363 printf("\n COMMAND INFO: %d (0x%x)", info, info); 364 365 /* 366 * Decode ASC && ASCQ info, plus FRU, plus the rest... 367 */ 368 369 cp = scsi_decode_sense(s, 1, sbs, sizeof(sbs)); 370 if (cp) 371 printf("\n ASC/ASCQ: %s", cp); 372 if (s[14] != 0) 373 printf("\n FRU CODE: 0x%x", s[14] & 0xff); 374 cp = scsi_decode_sense(s, 3, sbs, sizeof(sbs)); 375 if (cp) 376 printf("\n SKSV: %s", cp); 377 printf("\n"); 378 if (verbosity == 0) { 379 printf("\n"); 380 return; 381 } 382 383 /* 384 * Now figure whether we should print any additional informtion. 385 * 386 * Where should we start from? If we had SKSV data, 387 * start from offset 18, else from offset 15. 388 * 389 * From that point until the end of the buffer, check for any 390 * nonzero data. If we have some, go back and print the lot, 391 * otherwise we're done. 392 */ 393 if (sbs) 394 i = 18; 395 else 396 i = 15; 397 for (j = i; j < slen; j++) 398 if (s[j]) 399 break; 400 if (j == slen) 401 return; 402 403 printf("\n Additional Sense Information (byte %d out...):\n", i); 404 if (i == 15) { 405 printf("\n\t%2d:", i); 406 k = 7; 407 } else { 408 printf("\n\t%2d:", i); 409 k = 2; 410 j -= 2; 411 } 412 while (j > 0) { 413 if (i >= slen) 414 break; 415 if (k == 8) { 416 k = 0; 417 printf("\n\t%2d:", i); 418 } 419 printf(" 0x%02x", s[i] & 0xff); 420 k++; 421 j--; 422 i++; 423 } 424 printf("\n\n"); 425 } 426 427 char * 428 scsi_decode_sense(snsbuf, flag, rqsbuf, rqsbuflen) 429 const unsigned char *snsbuf; 430 int flag; 431 char *rqsbuf; 432 size_t rqsbuflen; 433 { 434 unsigned char skey; 435 char localbuf[64]; 436 437 skey = 0; 438 439 if (flag == 0 || flag == 2 || flag == 3) 440 skey = snsbuf[2] & 0xf; 441 if (flag == 0) { /* Sense Key Only */ 442 (void) strncpy(rqsbuf, sense_keys[skey], rqsbuflen); 443 rqsbuf[rqsbuflen - 1] = '\0'; 444 return (rqsbuf); 445 } else if (flag == 1) { /* ASC/ASCQ Only */ 446 asc2ascii(snsbuf[12], snsbuf[13], rqsbuf, rqsbuflen); 447 return (rqsbuf); 448 } else if (flag == 2) { /* Sense Key && ASC/ASCQ */ 449 asc2ascii(snsbuf[12], snsbuf[13], localbuf, sizeof(localbuf)); 450 (void) snprintf(rqsbuf, rqsbuflen, "%s, %s", sense_keys[skey], 451 localbuf); 452 return (rqsbuf); 453 } else if (flag == 3 && snsbuf[7] >= 9 && (snsbuf[15] & 0x80)) { 454 /* 455 * SKSV Data 456 */ 457 switch (skey) { 458 case SKEY_ILLEGAL_REQUEST: 459 if (snsbuf[15] & 0x8) 460 (void) snprintf(rqsbuf, rqsbuflen, 461 "Error in %s, Offset %d, bit %d", 462 (snsbuf[15] & 0x40)? "CDB" : "Parameters", 463 (snsbuf[16] & 0xff) << 8 | 464 (snsbuf[17] & 0xff), snsbuf[15] & 0x7); 465 else 466 (void) snprintf(rqsbuf, rqsbuflen, 467 "Error in %s, Offset %d", 468 (snsbuf[15] & 0x40)? "CDB" : "Parameters", 469 (snsbuf[16] & 0xff) << 8 | 470 (snsbuf[17] & 0xff)); 471 return (rqsbuf); 472 473 case SKEY_RECOVERED_ERROR: 474 case SKEY_MEDIUM_ERROR: 475 case SKEY_HARDWARE_ERROR: 476 (void) snprintf(rqsbuf, rqsbuflen, 477 "Actual Retry Count: %d", 478 (snsbuf[16] & 0xff) << 8 | (snsbuf[17] & 0xff)); 479 return (rqsbuf); 480 481 case SKEY_NOT_READY: 482 (void) snprintf(rqsbuf, rqsbuflen, 483 "Progress Indicator: %d", 484 (snsbuf[16] & 0xff) << 8 | (snsbuf[17] & 0xff)); 485 return (rqsbuf); 486 487 default: 488 break; 489 } 490 } 491 return (NULL); 492 } 493 494 void 495 scsi_print_sense(name, req, verbosity) 496 const char *name; 497 const scsireq_t *req; 498 int verbosity; 499 { 500 int i; 501 502 printf("%s: Check Condition on CDB:", name); 503 for (i = 0; i < req->cmdlen; i++) 504 printf(" %02x", req->cmd[i]); 505 printf("\n"); 506 scsi_print_sense_data(req->sense, req->senselen_used, verbosity); 507 } 508