1# Makefile.in generated by automake 1.15.1 from Makefile.am. 2# @configure_input@ 3 4# Copyright (C) 1994-2017 Free Software Foundation, Inc. 5 6# This Makefile.in is free software; the Free Software Foundation 7# gives unlimited permission to copy and/or distribute it, 8# with or without modifications, as long as this notice is preserved. 9 10# This program is distributed in the hope that it will be useful, 11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 13# PARTICULAR PURPOSE. 14 15@SET_MAKE@ 16 17# Copyright 2000-2018 Free Software Foundation, Inc. 18# This Makefile.am is free software; the Free Software Foundation 19# gives unlimited permission to copy and/or distribute it, 20# with or without modifications, as long as this notice is preserved. 21 22# This program is distributed in the hope that it will be useful, 23# but WITHOUT ANY WARRANTY, to the extent permitted by law; without 24# even the implied warranty of MERCHANTABILITY or FITNESS FOR A 25# PARTICULAR PURPOSE. 26 27VPATH = @srcdir@ 28am__is_gnu_make = { \ 29 if test -z '$(MAKELEVEL)'; then \ 30 false; \ 31 elif test -n '$(MAKE_HOST)'; then \ 32 true; \ 33 elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \ 34 true; \ 35 else \ 36 false; \ 37 fi; \ 38} 39am__make_running_with_option = \ 40 case $${target_option-} in \ 41 ?) ;; \ 42 *) echo "am__make_running_with_option: internal error: invalid" \ 43 "target option '$${target_option-}' specified" >&2; \ 44 exit 1;; \ 45 esac; \ 46 has_opt=no; \ 47 sane_makeflags=$$MAKEFLAGS; \ 48 if $(am__is_gnu_make); then \ 49 sane_makeflags=$$MFLAGS; \ 50 else \ 51 case $$MAKEFLAGS in \ 52 *\\[\ \ ]*) \ 53 bs=\\; \ 54 sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \ 55 | sed "s/$$bs$$bs[$$bs $$bs ]*//g"`;; \ 56 esac; \ 57 fi; \ 58 skip_next=no; \ 59 strip_trailopt () \ 60 { \ 61 flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \ 62 }; \ 63 for flg in $$sane_makeflags; do \ 64 test $$skip_next = yes && { skip_next=no; continue; }; \ 65 case $$flg in \ 66 *=*|--*) continue;; \ 67 -*I) strip_trailopt 'I'; skip_next=yes;; \ 68 -*I?*) strip_trailopt 'I';; \ 69 -*O) strip_trailopt 'O'; skip_next=yes;; \ 70 -*O?*) strip_trailopt 'O';; \ 71 -*l) strip_trailopt 'l'; skip_next=yes;; \ 72 -*l?*) strip_trailopt 'l';; \ 73 -[dEDm]) skip_next=yes;; \ 74 -[JT]) skip_next=yes;; \ 75 esac; \ 76 case $$flg in \ 77 *$$target_option*) has_opt=yes; break;; \ 78 esac; \ 79 done; \ 80 test $$has_opt = yes 81am__make_dryrun = (target_option=n; $(am__make_running_with_option)) 82am__make_keepgoing = (target_option=k; $(am__make_running_with_option)) 83pkgdatadir = $(datadir)/@PACKAGE@ 84pkgincludedir = $(includedir)/@PACKAGE@ 85pkglibdir = $(libdir)/@PACKAGE@ 86pkglibexecdir = $(libexecdir)/@PACKAGE@ 87am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd 88install_sh_DATA = $(install_sh) -c -m 644 89install_sh_PROGRAM = $(install_sh) -c 90install_sh_SCRIPT = $(install_sh) -c 91INSTALL_HEADER = $(INSTALL_DATA) 92transform = $(program_transform_name) 93NORMAL_INSTALL = : 94PRE_INSTALL = : 95POST_INSTALL = : 96NORMAL_UNINSTALL = : 97PRE_UNINSTALL = : 98POST_UNINSTALL = : 99build_triplet = @build@ 100host_triplet = @host@ 101subdir = . 102ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 103am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \ 104 $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \ 105 $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \ 106 $(top_srcdir)/acinclude.m4 $(top_srcdir)/configure.ac 107am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ 108 $(ACLOCAL_M4) 109DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \ 110 $(am__configure_deps) $(nobase_dist_doc_DATA) \ 111 $(am__DIST_COMMON) 112am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ 113 configure.lineno config.status.lineno 114mkinstalldirs = $(install_sh) -d 115CONFIG_CLEAN_FILES = mpfr.pc 116CONFIG_CLEAN_VPATH_FILES = 117AM_V_P = $(am__v_P_@AM_V@) 118am__v_P_ = $(am__v_P_@AM_DEFAULT_V@) 119am__v_P_0 = false 120am__v_P_1 = : 121AM_V_GEN = $(am__v_GEN_@AM_V@) 122am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@) 123am__v_GEN_0 = @echo " GEN " $@; 124am__v_GEN_1 = 125AM_V_at = $(am__v_at_@AM_V@) 126am__v_at_ = $(am__v_at_@AM_DEFAULT_V@) 127am__v_at_0 = @ 128am__v_at_1 = 129SOURCES = 130DIST_SOURCES = 131RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \ 132 ctags-recursive dvi-recursive html-recursive info-recursive \ 133 install-data-recursive install-dvi-recursive \ 134 install-exec-recursive install-html-recursive \ 135 install-info-recursive install-pdf-recursive \ 136 install-ps-recursive install-recursive installcheck-recursive \ 137 installdirs-recursive pdf-recursive ps-recursive \ 138 tags-recursive uninstall-recursive 139am__can_run_installinfo = \ 140 case $$AM_UPDATE_INFO_DIR in \ 141 n|no|NO) false;; \ 142 *) (install-info --version) >/dev/null 2>&1;; \ 143 esac 144am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; 145am__vpath_adj = case $$p in \ 146 $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ 147 *) f=$$p;; \ 148 esac; 149am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; 150am__install_max = 40 151am__nobase_strip_setup = \ 152 srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` 153am__nobase_strip = \ 154 for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" 155am__nobase_list = $(am__nobase_strip_setup); \ 156 for p in $$list; do echo "$$p $$p"; done | \ 157 sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ 158 $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ 159 if (++n[$$2] == $(am__install_max)) \ 160 { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ 161 END { for (dir in files) print dir, files[dir] }' 162am__base_list = \ 163 sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ 164 sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' 165am__uninstall_files_from_dir = { \ 166 test -z "$$files" \ 167 || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \ 168 || { echo " ( cd '$$dir' && rm -f" $$files ")"; \ 169 $(am__cd) "$$dir" && rm -f $$files; }; \ 170 } 171am__installdirs = "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)" 172DATA = $(nobase_dist_doc_DATA) $(pkgconfig_DATA) 173RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ 174 distclean-recursive maintainer-clean-recursive 175am__recursive_targets = \ 176 $(RECURSIVE_TARGETS) \ 177 $(RECURSIVE_CLEAN_TARGETS) \ 178 $(am__extra_recursive_targets) 179AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \ 180 cscope distdir dist dist-all distcheck 181am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP) 182# Read a list of newline-separated strings from the standard input, 183# and print each of them once, without duplicates. Input order is 184# *not* preserved. 185am__uniquify_input = $(AWK) '\ 186 BEGIN { nonempty = 0; } \ 187 { items[$$0] = 1; nonempty = 1; } \ 188 END { if (nonempty) { for (i in items) print i; }; } \ 189' 190# Make sure the list of sources is unique. This is necessary because, 191# e.g., the same source file might be shared among _SOURCES variables 192# for different programs/libraries. 193am__define_uniq_tagged_files = \ 194 list='$(am__tagged_files)'; \ 195 unique=`for i in $$list; do \ 196 if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ 197 done | $(am__uniquify_input)` 198ETAGS = etags 199CTAGS = ctags 200CSCOPE = cscope 201DIST_SUBDIRS = $(SUBDIRS) 202am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/mpfr.pc.in AUTHORS \ 203 COPYING COPYING.LESSER ChangeLog INSTALL NEWS README TODO \ 204 ar-lib compile config.guess config.sub install-sh ltmain.sh \ 205 missing 206DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) 207distdir = $(PACKAGE)-$(VERSION) 208top_distdir = $(distdir) 209am__remove_distdir = \ 210 if test -d "$(distdir)"; then \ 211 find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \ 212 && rm -rf "$(distdir)" \ 213 || { sleep 5 && rm -rf "$(distdir)"; }; \ 214 else :; fi 215am__post_remove_distdir = $(am__remove_distdir) 216am__relativize = \ 217 dir0=`pwd`; \ 218 sed_first='s,^\([^/]*\)/.*$$,\1,'; \ 219 sed_rest='s,^[^/]*/*,,'; \ 220 sed_last='s,^.*/\([^/]*\)$$,\1,'; \ 221 sed_butlast='s,/*[^/]*$$,,'; \ 222 while test -n "$$dir1"; do \ 223 first=`echo "$$dir1" | sed -e "$$sed_first"`; \ 224 if test "$$first" != "."; then \ 225 if test "$$first" = ".."; then \ 226 dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ 227 dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ 228 else \ 229 first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ 230 if test "$$first2" = "$$first"; then \ 231 dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ 232 else \ 233 dir2="../$$dir2"; \ 234 fi; \ 235 dir0="$$dir0"/"$$first"; \ 236 fi; \ 237 fi; \ 238 dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ 239 done; \ 240 reldir="$$dir2" 241DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 $(distdir).tar.xz \ 242 $(distdir).zip 243GZIP_ENV = --best 244DIST_TARGETS = dist-xz dist-bzip2 dist-gzip dist-zip 245distuninstallcheck_listfiles = find . -type f -print 246am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \ 247 | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$' 248distcleancheck_listfiles = find . -type f -print 249ACLOCAL = @ACLOCAL@ 250ALLOCA = @ALLOCA@ 251AMTAR = @AMTAR@ 252AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@ 253AR = @AR@ 254AS = @AS@ 255AUTOCONF = @AUTOCONF@ 256AUTOHEADER = @AUTOHEADER@ 257AUTOMAKE = @AUTOMAKE@ 258AWK = @AWK@ 259CC = @CC@ 260CCDEPMODE = @CCDEPMODE@ 261CFLAGS = @CFLAGS@ 262CPP = @CPP@ 263CPPFLAGS = @CPPFLAGS@ 264CYGPATH_W = @CYGPATH_W@ 265DATAFILES = @DATAFILES@ 266DEFS = @DEFS@ 267DEPDIR = @DEPDIR@ 268DLLTOOL = @DLLTOOL@ 269DSYMUTIL = @DSYMUTIL@ 270DUMPBIN = @DUMPBIN@ 271ECHO_C = @ECHO_C@ 272ECHO_N = @ECHO_N@ 273ECHO_T = @ECHO_T@ 274EGREP = @EGREP@ 275EXEEXT = @EXEEXT@ 276FGREP = @FGREP@ 277GREP = @GREP@ 278INSTALL = @INSTALL@ 279INSTALL_DATA = @INSTALL_DATA@ 280INSTALL_PROGRAM = @INSTALL_PROGRAM@ 281INSTALL_SCRIPT = @INSTALL_SCRIPT@ 282INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ 283LD = @LD@ 284LDFLAGS = @LDFLAGS@ 285LIBMPFR_LDFLAGS = @LIBMPFR_LDFLAGS@ 286LIBOBJS = @LIBOBJS@ 287LIBS = @LIBS@ 288LIBTOOL = @LIBTOOL@ 289LIPO = @LIPO@ 290LN_S = @LN_S@ 291LTLIBOBJS = @LTLIBOBJS@ 292LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@ 293MAINT = @MAINT@ 294MAKEINFO = @MAKEINFO@ 295MANIFEST_TOOL = @MANIFEST_TOOL@ 296MKDIR_P = @MKDIR_P@ 297MPFR_LDFLAGS = @MPFR_LDFLAGS@ 298MPFR_LIBM = @MPFR_LIBM@ 299MPFR_LIBQUADMATH = @MPFR_LIBQUADMATH@ 300NM = @NM@ 301NMEDIT = @NMEDIT@ 302OBJDUMP = @OBJDUMP@ 303OBJEXT = @OBJEXT@ 304OTOOL = @OTOOL@ 305OTOOL64 = @OTOOL64@ 306PACKAGE = @PACKAGE@ 307PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ 308PACKAGE_NAME = @PACKAGE_NAME@ 309PACKAGE_STRING = @PACKAGE_STRING@ 310PACKAGE_TARNAME = @PACKAGE_TARNAME@ 311PACKAGE_URL = @PACKAGE_URL@ 312PACKAGE_VERSION = @PACKAGE_VERSION@ 313PATH_SEPARATOR = @PATH_SEPARATOR@ 314PTHREAD_CC = @PTHREAD_CC@ 315PTHREAD_CFLAGS = @PTHREAD_CFLAGS@ 316PTHREAD_LIBS = @PTHREAD_LIBS@ 317RANLIB = @RANLIB@ 318SED = @SED@ 319SET_MAKE = @SET_MAKE@ 320SHELL = @SHELL@ 321STRIP = @STRIP@ 322TUNE_LIBS = @TUNE_LIBS@ 323VERSION = @VERSION@ 324abs_builddir = @abs_builddir@ 325abs_srcdir = @abs_srcdir@ 326abs_top_builddir = @abs_top_builddir@ 327abs_top_srcdir = @abs_top_srcdir@ 328ac_ct_AR = @ac_ct_AR@ 329ac_ct_CC = @ac_ct_CC@ 330ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ 331am__include = @am__include@ 332am__leading_dot = @am__leading_dot@ 333am__quote = @am__quote@ 334am__tar = @am__tar@ 335am__untar = @am__untar@ 336ax_pthread_config = @ax_pthread_config@ 337bindir = @bindir@ 338build = @build@ 339build_alias = @build_alias@ 340build_cpu = @build_cpu@ 341build_os = @build_os@ 342build_vendor = @build_vendor@ 343builddir = @builddir@ 344datadir = @datadir@ 345datarootdir = @datarootdir@ 346docdir = @docdir@ 347dvidir = @dvidir@ 348exec_prefix = @exec_prefix@ 349host = @host@ 350host_alias = @host_alias@ 351host_cpu = @host_cpu@ 352host_os = @host_os@ 353host_vendor = @host_vendor@ 354htmldir = @htmldir@ 355includedir = @includedir@ 356infodir = @infodir@ 357install_sh = @install_sh@ 358libdir = @libdir@ 359libexecdir = @libexecdir@ 360localedir = @localedir@ 361localstatedir = @localstatedir@ 362mandir = @mandir@ 363mkdir_p = @mkdir_p@ 364oldincludedir = @oldincludedir@ 365pdfdir = @pdfdir@ 366prefix = @prefix@ 367program_transform_name = @program_transform_name@ 368psdir = @psdir@ 369runstatedir = @runstatedir@ 370sbindir = @sbindir@ 371sharedstatedir = @sharedstatedir@ 372srcdir = @srcdir@ 373sysconfdir = @sysconfdir@ 374target_alias = @target_alias@ 375top_build_prefix = @top_build_prefix@ 376top_builddir = @top_builddir@ 377top_srcdir = @top_srcdir@ 378AUTOMAKE_OPTIONS = gnu 379 380# ACLOCAL_AMFLAGS will be fully deprecated in Automake 2.0; 381# AC_CONFIG_MACRO_DIRS (introduced in Automake 1.13) is now used instead, 382# but we still set ACLOCAL_AMFLAGS to avoid a warning message from 383# libtoolize and in case some developer needs to switch back to an 384# old Automake version. 385ACLOCAL_AMFLAGS = -I m4 386SUBDIRS = doc src tests tune tools/bench 387pkgconfigdir = $(libdir)/pkgconfig 388pkgconfig_DATA = mpfr.pc 389nobase_dist_doc_DATA = AUTHORS BUGS COPYING COPYING.LESSER NEWS TODO \ 390 examples/ReadMe examples/divworst.c examples/rndo-add.c examples/sample.c \ 391 examples/version.c examples/can_round.c 392 393EXTRA_DIST = PATCHES VERSION doc/README.dev doc/check-typography \ 394 tools/ck-clz_tab tools/ck-copyright-notice tools/ck-news \ 395 tools/ck-version-info tools/get_patches.sh \ 396 $(DATAFILES) 397 398all: all-recursive 399 400.SUFFIXES: 401am--refresh: Makefile 402 @: 403$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) 404 @for dep in $?; do \ 405 case '$(am__configure_deps)' in \ 406 *$$dep*) \ 407 echo ' cd $(srcdir) && $(AUTOMAKE) --gnu'; \ 408 $(am__cd) $(srcdir) && $(AUTOMAKE) --gnu \ 409 && exit 0; \ 410 exit 1;; \ 411 esac; \ 412 done; \ 413 echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ 414 $(am__cd) $(top_srcdir) && \ 415 $(AUTOMAKE) --gnu Makefile 416Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status 417 @case '$?' in \ 418 *config.status*) \ 419 echo ' $(SHELL) ./config.status'; \ 420 $(SHELL) ./config.status;; \ 421 *) \ 422 echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ 423 cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ 424 esac; 425 426$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) 427 $(SHELL) ./config.status --recheck 428 429$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 430 @echo "NOT REBUILDING $@" 431NetBSD_DISABLED_configure: 432 $(am__cd) $(srcdir) && $(AUTOCONF) 433$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) 434 @echo "NOT REBUILDING $@" 435NetBSD_DISABLED_aclocal: 436 $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) 437$(am__aclocal_m4_deps): 438mpfr.pc: $(top_builddir)/config.status $(srcdir)/mpfr.pc.in 439 cd $(top_builddir) && $(SHELL) ./config.status $@ 440 441mostlyclean-libtool: 442 -rm -f *.lo 443 444clean-libtool: 445 -rm -rf .libs _libs 446 447distclean-libtool: 448 -rm -f libtool config.lt 449install-nobase_dist_docDATA: $(nobase_dist_doc_DATA) 450 @$(NORMAL_INSTALL) 451 @list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 452 if test -n "$$list"; then \ 453 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)'"; \ 454 $(MKDIR_P) "$(DESTDIR)$(docdir)" || exit 1; \ 455 fi; \ 456 $(am__nobase_list) | while read dir files; do \ 457 xfiles=; for file in $$files; do \ 458 if test -f "$$file"; then xfiles="$$xfiles $$file"; \ 459 else xfiles="$$xfiles $(srcdir)/$$file"; fi; done; \ 460 test -z "$$xfiles" || { \ 461 test "x$$dir" = x. || { \ 462 echo " $(MKDIR_P) '$(DESTDIR)$(docdir)/$$dir'"; \ 463 $(MKDIR_P) "$(DESTDIR)$(docdir)/$$dir"; }; \ 464 echo " $(INSTALL_DATA) $$xfiles '$(DESTDIR)$(docdir)/$$dir'"; \ 465 $(INSTALL_DATA) $$xfiles "$(DESTDIR)$(docdir)/$$dir" || exit $$?; }; \ 466 done 467 468uninstall-nobase_dist_docDATA: 469 @$(NORMAL_UNINSTALL) 470 @list='$(nobase_dist_doc_DATA)'; test -n "$(docdir)" || list=; \ 471 $(am__nobase_strip_setup); files=`$(am__nobase_strip)`; \ 472 dir='$(DESTDIR)$(docdir)'; $(am__uninstall_files_from_dir) 473install-pkgconfigDATA: $(pkgconfig_DATA) 474 @$(NORMAL_INSTALL) 475 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 476 if test -n "$$list"; then \ 477 echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \ 478 $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \ 479 fi; \ 480 for p in $$list; do \ 481 if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ 482 echo "$$d$$p"; \ 483 done | $(am__base_list) | \ 484 while read files; do \ 485 echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \ 486 $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \ 487 done 488 489uninstall-pkgconfigDATA: 490 @$(NORMAL_UNINSTALL) 491 @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \ 492 files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ 493 dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir) 494 495# This directory's subdirectories are mostly independent; you can cd 496# into them and run 'make' without going through this Makefile. 497# To change the values of 'make' variables: instead of editing Makefiles, 498# (1) if the variable is set in 'config.status', edit 'config.status' 499# (which will cause the Makefiles to be regenerated when you run 'make'); 500# (2) otherwise, pass the desired values on the 'make' command line. 501$(am__recursive_targets): 502 @fail=; \ 503 if $(am__make_keepgoing); then \ 504 failcom='fail=yes'; \ 505 else \ 506 failcom='exit 1'; \ 507 fi; \ 508 dot_seen=no; \ 509 target=`echo $@ | sed s/-recursive//`; \ 510 case "$@" in \ 511 distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ 512 *) list='$(SUBDIRS)' ;; \ 513 esac; \ 514 for subdir in $$list; do \ 515 echo "Making $$target in $$subdir"; \ 516 if test "$$subdir" = "."; then \ 517 dot_seen=yes; \ 518 local_target="$$target-am"; \ 519 else \ 520 local_target="$$target"; \ 521 fi; \ 522 ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ 523 || eval $$failcom; \ 524 done; \ 525 if test "$$dot_seen" = "no"; then \ 526 $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ 527 fi; test -z "$$fail" 528 529ID: $(am__tagged_files) 530 $(am__define_uniq_tagged_files); mkid -fID $$unique 531tags: tags-recursive 532TAGS: tags 533 534tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 535 set x; \ 536 here=`pwd`; \ 537 if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ 538 include_option=--etags-include; \ 539 empty_fix=.; \ 540 else \ 541 include_option=--include; \ 542 empty_fix=; \ 543 fi; \ 544 list='$(SUBDIRS)'; for subdir in $$list; do \ 545 if test "$$subdir" = .; then :; else \ 546 test ! -f $$subdir/TAGS || \ 547 set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ 548 fi; \ 549 done; \ 550 $(am__define_uniq_tagged_files); \ 551 shift; \ 552 if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ 553 test -n "$$unique" || unique=$$empty_fix; \ 554 if test $$# -gt 0; then \ 555 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 556 "$$@" $$unique; \ 557 else \ 558 $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ 559 $$unique; \ 560 fi; \ 561 fi 562ctags: ctags-recursive 563 564CTAGS: ctags 565ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files) 566 $(am__define_uniq_tagged_files); \ 567 test -z "$(CTAGS_ARGS)$$unique" \ 568 || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ 569 $$unique 570 571GTAGS: 572 here=`$(am__cd) $(top_builddir) && pwd` \ 573 && $(am__cd) $(top_srcdir) \ 574 && gtags -i $(GTAGS_ARGS) "$$here" 575cscope: cscope.files 576 test ! -s cscope.files \ 577 || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS) 578clean-cscope: 579 -rm -f cscope.files 580cscope.files: clean-cscope cscopelist 581cscopelist: cscopelist-recursive 582 583cscopelist-am: $(am__tagged_files) 584 list='$(am__tagged_files)'; \ 585 case "$(srcdir)" in \ 586 [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \ 587 *) sdir=$(subdir)/$(srcdir) ;; \ 588 esac; \ 589 for i in $$list; do \ 590 if test -f "$$i"; then \ 591 echo "$(subdir)/$$i"; \ 592 else \ 593 echo "$$sdir/$$i"; \ 594 fi; \ 595 done >> $(top_builddir)/cscope.files 596 597distclean-tags: 598 -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags 599 -rm -f cscope.out cscope.in.out cscope.po.out cscope.files 600 601distdir: $(DISTFILES) 602 $(am__remove_distdir) 603 test -d "$(distdir)" || mkdir "$(distdir)" 604 @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 605 topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ 606 list='$(DISTFILES)'; \ 607 dist_files=`for file in $$list; do echo $$file; done | \ 608 sed -e "s|^$$srcdirstrip/||;t" \ 609 -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ 610 case $$dist_files in \ 611 */*) $(MKDIR_P) `echo "$$dist_files" | \ 612 sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ 613 sort -u` ;; \ 614 esac; \ 615 for file in $$dist_files; do \ 616 if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ 617 if test -d $$d/$$file; then \ 618 dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ 619 if test -d "$(distdir)/$$file"; then \ 620 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 621 fi; \ 622 if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ 623 cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ 624 find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ 625 fi; \ 626 cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ 627 else \ 628 test -f "$(distdir)/$$file" \ 629 || cp -p $$d/$$file "$(distdir)/$$file" \ 630 || exit 1; \ 631 fi; \ 632 done 633 @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ 634 if test "$$subdir" = .; then :; else \ 635 $(am__make_dryrun) \ 636 || test -d "$(distdir)/$$subdir" \ 637 || $(MKDIR_P) "$(distdir)/$$subdir" \ 638 || exit 1; \ 639 dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ 640 $(am__relativize); \ 641 new_distdir=$$reldir; \ 642 dir1=$$subdir; dir2="$(top_distdir)"; \ 643 $(am__relativize); \ 644 new_top_distdir=$$reldir; \ 645 echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ 646 echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ 647 ($(am__cd) $$subdir && \ 648 $(MAKE) $(AM_MAKEFLAGS) \ 649 top_distdir="$$new_top_distdir" \ 650 distdir="$$new_distdir" \ 651 am__remove_distdir=: \ 652 am__skip_length_check=: \ 653 am__skip_mode_fix=: \ 654 distdir) \ 655 || exit 1; \ 656 fi; \ 657 done 658 $(MAKE) $(AM_MAKEFLAGS) \ 659 top_distdir="$(top_distdir)" distdir="$(distdir)" \ 660 dist-hook 661 -test -n "$(am__skip_mode_fix)" \ 662 || find "$(distdir)" -type d ! -perm -755 \ 663 -exec chmod u+rwx,go+rx {} \; -o \ 664 ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ 665 ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ 666 ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ 667 || chmod -R a+r "$(distdir)" 668dist-gzip: distdir 669 tardir=$(distdir) && $(am__tar) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).tar.gz 670 $(am__post_remove_distdir) 671dist-bzip2: distdir 672 tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2 673 $(am__post_remove_distdir) 674 675dist-lzip: distdir 676 tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz 677 $(am__post_remove_distdir) 678dist-xz: distdir 679 tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz 680 $(am__post_remove_distdir) 681 682dist-tarZ: distdir 683 @echo WARNING: "Support for distribution archives compressed with" \ 684 "legacy program 'compress' is deprecated." >&2 685 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 686 tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z 687 $(am__post_remove_distdir) 688 689dist-shar: distdir 690 @echo WARNING: "Support for shar distribution archives is" \ 691 "deprecated." >&2 692 @echo WARNING: "It will be removed altogether in Automake 2.0" >&2 693 shar $(distdir) | eval GZIP= gzip $(GZIP_ENV) -c >$(distdir).shar.gz 694 $(am__post_remove_distdir) 695dist-zip: distdir 696 -rm -f $(distdir).zip 697 zip -rq $(distdir).zip $(distdir) 698 $(am__post_remove_distdir) 699 700dist dist-all: 701 $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:' 702 $(am__post_remove_distdir) 703 704# This target untars the dist file and tries a VPATH configuration. Then 705# it guarantees that the distribution is self-contained by making another 706# tarfile. 707distcheck: dist 708 case '$(DIST_ARCHIVES)' in \ 709 *.tar.gz*) \ 710 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\ 711 *.tar.bz2*) \ 712 bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\ 713 *.tar.lz*) \ 714 lzip -dc $(distdir).tar.lz | $(am__untar) ;;\ 715 *.tar.xz*) \ 716 xz -dc $(distdir).tar.xz | $(am__untar) ;;\ 717 *.tar.Z*) \ 718 uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ 719 *.shar.gz*) \ 720 eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\ 721 *.zip*) \ 722 unzip $(distdir).zip ;;\ 723 esac 724 chmod -R a-w $(distdir) 725 chmod u+w $(distdir) 726 mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst 727 chmod a-w $(distdir) 728 test -d $(distdir)/_build || exit 0; \ 729 dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ 730 && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ 731 && am__cwd=`pwd` \ 732 && $(am__cd) $(distdir)/_build/sub \ 733 && ../../configure \ 734 $(AM_DISTCHECK_CONFIGURE_FLAGS) \ 735 $(DISTCHECK_CONFIGURE_FLAGS) \ 736 --srcdir=../.. --prefix="$$dc_install_base" \ 737 && $(MAKE) $(AM_MAKEFLAGS) \ 738 && $(MAKE) $(AM_MAKEFLAGS) dvi \ 739 && $(MAKE) $(AM_MAKEFLAGS) check \ 740 && $(MAKE) $(AM_MAKEFLAGS) install \ 741 && $(MAKE) $(AM_MAKEFLAGS) installcheck \ 742 && $(MAKE) $(AM_MAKEFLAGS) uninstall \ 743 && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ 744 distuninstallcheck \ 745 && chmod -R a-w "$$dc_install_base" \ 746 && ({ \ 747 (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ 748 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ 749 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ 750 && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ 751 distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ 752 } || { rm -rf "$$dc_destdir"; exit 1; }) \ 753 && rm -rf "$$dc_destdir" \ 754 && $(MAKE) $(AM_MAKEFLAGS) dist \ 755 && rm -rf $(DIST_ARCHIVES) \ 756 && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \ 757 && cd "$$am__cwd" \ 758 || exit 1 759 $(am__post_remove_distdir) 760 @(echo "$(distdir) archives ready for distribution: "; \ 761 list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ 762 sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' 763distuninstallcheck: 764 @test -n '$(distuninstallcheck_dir)' || { \ 765 echo 'ERROR: trying to run $@ with an empty' \ 766 '$$(distuninstallcheck_dir)' >&2; \ 767 exit 1; \ 768 }; \ 769 $(am__cd) '$(distuninstallcheck_dir)' || { \ 770 echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \ 771 exit 1; \ 772 }; \ 773 test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \ 774 || { echo "ERROR: files left after uninstall:" ; \ 775 if test -n "$(DESTDIR)"; then \ 776 echo " (check DESTDIR support)"; \ 777 fi ; \ 778 $(distuninstallcheck_listfiles) ; \ 779 exit 1; } >&2 780distcleancheck: distclean 781 @if test '$(srcdir)' = . ; then \ 782 echo "ERROR: distcleancheck can only run from a VPATH build" ; \ 783 exit 1 ; \ 784 fi 785 @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ 786 || { echo "ERROR: files left in build directory after distclean:" ; \ 787 $(distcleancheck_listfiles) ; \ 788 exit 1; } >&2 789check-am: all-am 790check: check-recursive 791all-am: Makefile $(DATA) 792installdirs: installdirs-recursive 793installdirs-am: 794 for dir in "$(DESTDIR)$(docdir)" "$(DESTDIR)$(pkgconfigdir)"; do \ 795 test -z "$$dir" || $(MKDIR_P) "$$dir"; \ 796 done 797install: install-recursive 798install-exec: install-exec-recursive 799install-data: install-data-recursive 800uninstall: uninstall-recursive 801 802install-am: all-am 803 @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am 804 805installcheck: installcheck-recursive 806install-strip: 807 if test -z '$(STRIP)'; then \ 808 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 809 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 810 install; \ 811 else \ 812 $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ 813 install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ 814 "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \ 815 fi 816mostlyclean-generic: 817 818clean-generic: 819 820distclean-generic: 821 -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) 822 -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) 823 824maintainer-clean-generic: 825 @echo "This command is intended for maintainers to use" 826 @echo "it deletes files that may require special tools to rebuild." 827clean: clean-recursive 828 829clean-am: clean-generic clean-libtool mostlyclean-am 830 831distclean: distclean-recursive 832 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 833 -rm -f Makefile 834distclean-am: clean-am distclean-generic distclean-libtool \ 835 distclean-tags 836 837dvi: dvi-recursive 838 839dvi-am: 840 841html: html-recursive 842 843html-am: 844 845info: info-recursive 846 847info-am: 848 849install-data-am: install-nobase_dist_docDATA install-pkgconfigDATA 850 851install-dvi: install-dvi-recursive 852 853install-dvi-am: 854 855install-exec-am: 856 857install-html: install-html-recursive 858 859install-html-am: 860 861install-info: install-info-recursive 862 863install-info-am: 864 865install-man: 866 867install-pdf: install-pdf-recursive 868 869install-pdf-am: 870 871install-ps: install-ps-recursive 872 873install-ps-am: 874 875installcheck-am: 876 877maintainer-clean: maintainer-clean-recursive 878 -rm -f $(am__CONFIG_DISTCLEAN_FILES) 879 -rm -rf $(top_srcdir)/autom4te.cache 880 -rm -f Makefile 881maintainer-clean-am: distclean-am maintainer-clean-generic 882 883mostlyclean: mostlyclean-recursive 884 885mostlyclean-am: mostlyclean-generic mostlyclean-libtool 886 887pdf: pdf-recursive 888 889pdf-am: 890 891ps: ps-recursive 892 893ps-am: 894 895uninstall-am: uninstall-nobase_dist_docDATA uninstall-pkgconfigDATA 896 897.MAKE: $(am__recursive_targets) install-am install-strip 898 899.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \ 900 am--refresh check check-am clean clean-cscope clean-generic \ 901 clean-libtool cscope cscopelist-am ctags ctags-am dist \ 902 dist-all dist-bzip2 dist-gzip dist-hook dist-lzip dist-shar \ 903 dist-tarZ dist-xz dist-zip distcheck distclean \ 904 distclean-generic distclean-libtool distclean-tags \ 905 distcleancheck distdir distuninstallcheck dvi dvi-am html \ 906 html-am info info-am install install-am install-data \ 907 install-data-am install-dvi install-dvi-am install-exec \ 908 install-exec-am install-html install-html-am install-info \ 909 install-info-am install-man install-nobase_dist_docDATA \ 910 install-pdf install-pdf-am install-pkgconfigDATA install-ps \ 911 install-ps-am install-strip installcheck installcheck-am \ 912 installdirs installdirs-am maintainer-clean \ 913 maintainer-clean-generic mostlyclean mostlyclean-generic \ 914 mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \ 915 uninstall-am uninstall-nobase_dist_docDATA \ 916 uninstall-pkgconfigDATA 917 918.PRECIOUS: Makefile 919 920 921bench: 922 cd tools/bench && $(MAKE) $(AM_MAKEFLAGS) bench 923 924# Various checks for "make dist". 925# * Check consistency concerning -version-info. Moreover if the VERSION 926# file doesn't end with "-dev", check that the -version-info value is 927# up-to-date. Note: this is a heuristic, to detect some mistakes. 928# * Check that copyright notices exist and appear to be correct. 929# * Check the NEWS file. 930dist-hook: 931 cd $(srcdir) && tools/ck-version-info 932 cd $(srcdir) && tools/ck-copyright-notice 933 cd $(srcdir) && tools/ck-news 934 cd $(srcdir) && tools/ck-clz_tab 935 cd $(srcdir)/doc && ./check-typography 936 937# Check that MPFR does not use GMP internal symbols. Of course, do not run 938# this rule if you use --with-gmp-build or --enable-gmp-internals. 939# This test does nothing if no libmpfr.so is generated. 940check-gmp-symbols: 941 cd src && $(MAKE) check-gmp-symbols 942 943# Check that MPFR does not define symbols with a GMP reserved prefix. 944# This test does nothing if no libmpfr.so is generated. 945check-exported-symbols: 946 cd src && $(MAKE) check-exported-symbols 947 948.PHONY: check-gmp-symbols check-exported-symbols 949 950# Tell versions [3.59,3.63) of GNU make to not export all variables. 951# Otherwise a system limit (for SysV at least) may be exceeded. 952.NOEXPORT: 953