1# Copyright 1998-2015 Free Software Foundation, Inc. 2 3# This program is free software; you can redistribute it and/or modify 4# it under the terms of the GNU General Public License as published by 5# the Free Software Foundation; either version 3 of the License, or 6# (at your option) any later version. 7# 8# This program is distributed in the hope that it will be useful, 9# but WITHOUT ANY WARRANTY; without even the implied warranty of 10# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 11# GNU General Public License for more details. 12# 13# You should have received a copy of the GNU General Public License 14# along with this program. If not, see <http://www.gnu.org/licenses/>. 15 16# This file was written by Elena Zannoni (ezannoni@cygnus.com) 17 18 19 20standard_testfile 21 22# Test depends on printf, which the sparclet stub doesn't support. 23if { [istarget "sparclet-*-*"] } { 24 return 0 25} 26 27# Some targets can't call functions, so don't even bother with this 28# test. 29if [target_info exists gdb,cannot_call_functions] { 30 setup_xfail "*-*-*" 2416 31 fail "This target can not call functions" 32 continue 33} 34 35# Create and source the file that provides information about the compiler 36# used to compile the test case. 37 38if [get_compiler_info] { 39 return -1 40} 41 42if {[prepare_for_testing $testfile.exp $testfile $srcfile debug]} { 43 untested $testfile.exp 44 return -1 45} 46 47 48set oldtimeout $timeout 49set timeout [expr "$timeout + 60"] 50 51gdb_test_no_output "set print sevenbit-strings" 52gdb_test_no_output "set print address off" 53gdb_test_no_output "set width 0" 54 55 56if ![runto_main] then { 57 perror "couldn't run to breakpoint" 58 continue 59} 60 61get_debug_format 62 63set stop_line [gdb_get_line_number "-tbreak1-"] 64gdb_test "tbreak $stop_line" \ 65 "Temporary breakpoint ${decimal}.*file.*$srcfile, line $stop_line.*" \ 66 "tbreakpoint at tbreak1" 67 68gdb_test continue \ 69"Continuing\\..*main \\(\\) at.*$srcfile:$stop_line.*" \ 70"run until breakpoint set at a line" 71 72 73#call print_double_array(double_array) 74if {![gdb_skip_float_test "print print_double_array(double_array)"] && \ 75 ![gdb_skip_stdio_test "print print_double_array(double_array)"] } { 76 gdb_test_sequence "print print_double_array(double_array)" "" { 77 "\[ \t\r\n\]+array_d :" 78 "\[ \t\r\n\]+=========" 79 "\[ \t\r\n\]+0.000000" 80 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]" 81 "\[ \t\r\n\]+" 82 } 83} 84 85#call print_char_array(char_array) 86 87if ![gdb_skip_stdio_test "print_char_array(char_array)"] { 88 gdb_test_sequence "print print_char_array(char_array)" "" { 89 "\[ \t\r\n\]+array_c :" 90 "\[ \t\r\n\]+=========" 91 "\[ \t\r\n\]+\[ \t\r\n\]+Z" 92 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 93 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 94 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+" 95 } 96} 97 98set stop_line [gdb_get_line_number "-tbreak2-"] 99gdb_test "tbreak $stop_line" \ 100"Temporary breakpoint.*file.*$srcfile, line $stop_line.*" \ 101"tbreakpoint at tbreak2" 102 103if ![gdb_skip_stdio_test "continue to tbreak2"] { 104 gdb_test_sequence "continue" "continue to tbreak2" { 105 "\[ \t\r\n\]+array_c :" 106 "\[ \t\r\n\]+=========" 107 "\[ \t\r\n\]+\[ \t\r\n\]+Z" 108 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 109 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ" 110 "\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa" 111 "\[ \t\r\n\]+main.*at.*:\[0-9\]+" 112 "\[ \t\r\n\]+\[0-9\]+.*print_double_array\\(double_array\\)" 113 } 114} else { 115 gdb_test "continue" ".*" "" 116} 117 118# I am disabling this test, because it takes too long. I verified by 119# hand that it works, feel free to check for yourself. 120#call print_all_arrays(integer_array, char_array, float_array, double_array) 121#send_gdb "print print_all_arrays(integer_array, char_array, float_array, double_array)\n" 122#gdb_expect { 123# -re ".*array_i :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0\[ \t\r\n\]+-1 -2 -3 -4 -5 -6 -7 -8\[ \t\r\n\]+-9 -10 -11 -12 -13 -14 -15 -16\[ \t\r\n\]+-17 -18 -19 -20 -21 -22 -23 -24\[ \t\r\n\]+-25 -26 -27 -28 -29 -30 -31 -32\[ \t\r\n\]+-33 -34 -35 -36 -37 -38 -39 -40\[ \t\r\n\]+-41 -42 -43 -44 -45 -46 -47 -48\[ \t\r\n\]+-49\[ \t\r\n\]+\[ \t\r\n\]+array_c :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+Z\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZ\[ \t\r\n\]+aZaZaZaZaZaZaZaZaZa\[ \t\r\n\]+\[ \t\r\n\]+array_f :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+0.142450 0.284900 0.427350 0.569801 0.712251 0.854701 0.997151 1.139601\[ \t\r\n\]+1.282051 1.424501 1.566952 1.709402 1.851852 1.994302\[ \t\r\n\]+\[ \t\r\n\]+array_d :\[ \t\r\n\]+=========\[ \t\r\n\]+\[ \t\r\n\]+0.000000\[ \t\r\n\]+23.456700 46.913400 70.370100 93.826800 117.283500 140.740200 164.196900 187.653600\[ \t\r\n\]+211.110300 234.567000 258.023700 281.480400 304.937100 328.393800 351.850500 375.307200\[ \t\r\n\]+398.763900 422.220600 445.677300 469.134000 492.590700 516.047400 539.504100 562.960800\[ \t\r\n\]+586.41750 609.874200 633.330900 656.787600 680.244300 703.701000 727.157700 750.614400\[ \t\r\n\]+774.071100 797.527800 820.984500 844.441200 867.897900 891.354600 914.811300 938.268000\[ \t\r\n\]+961.724700 985.181400 1008.638100 1032.094800 1055.551500 1079.008200 1102.464900 1125.921600\[ \t\r\n\]+1149.378300 1172.835000 1196.291700 1219.748400 1243.205100 1266.661800 1290.118500 1313.575200\[ \t\r\n\]+1337.031900 1360.488600 1383.945300 1407.402000 1430.858700 1454.315400 1477.772100 1501.228800\[ \t\r\n\]+1524.685500 1548.142200 1571.598900 1595.055600 1618.512300 1641.969000 1665.425700 1688.882400\[ \t\r\n\]+1712.339100 1735.795800 1759.252500 1782.709200 1806.165900 1829.622600 1853.079300 1876.536000\[ \t\r\n\]+1899.992700 1923.449400 1946.906100 1970.362800 1993.819500 2017.276200 2040.732900 2064.189600\[ \t\r\n\]+2087.646300 2111.103000 2134.559700 2158.016400 2181.473100 2204.929800 2228.386500 2251.843200\[ \t\r\n\]+2275.299900 2298.756600 2322.213300.*$gdb_prompt $" { 124# pass "print print_all_arrays(integer_array, char_array, float_array, double_array)" 125# } 126# -re ".*$gdb_prompt $" { fail "print print_all_arrays(integer_array, char_array, float_array, double_array)" } 127# timeout { fail "(timeout) print print_all_arrays(integer_array, char_array, float_array, double_array)" } 128# } 129 130#set timeout $oldtimeout 131set stop_line [gdb_get_line_number "-tbreak3-"] 132gdb_test "tbreak $stop_line" \ 133 "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ 134 "tbreakpoint at tbreak3" 135 136if {![gdb_skip_float_test "continuing to tbreak3"] && \ 137 ![gdb_skip_stdio_test "continuing to tbreak3"] } { 138 gdb_test_sequence "continue" "continuing to tbreak3" { 139 "Continuing\\." 140 "\[ \t\r\n\]+array_d :" 141 "\[ \t\r\n\]+=========" 142 "\[ \t\r\n\]+0.000000" 143 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 144 "\[ \t\r\n\]+" 145 "array_f :" 146 "student id :\[\t \]+.*YELLOW" 147 "array_i :" 148 "main \\(\\) at .*call-ar-st.c:\[0-9\]+\[ \t\r\n\]+.*print_all_arrays\\(integer_array, char_array, float_array, double_array\\)." 149 } 150} else { 151 gdb_test "continue" ".*" "" 152} 153 154#step 155set stop_line [gdb_get_line_number "-step1-"] 156gdb_test "step" \ 157 "print_all_arrays \\(array_i=<integer_array.*>, array_c=<char_array.*> .ZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZaZa., array_f=<float_array.*>, array_d=<double_array.*>\\) at .*$srcfile:$stop_line\[ \t\r\n\]+$stop_line.*print_int_array\\(array_i\\);.*" \ 158 "step inside print_all_arrays" 159 160#step -over 161if ![gdb_skip_stdio_test "next over print_int_array in print_all_arrays"] { 162 set stop_line [gdb_get_line_number "-next1-"] 163 gdb_test "next" \ 164 "array_i :.*$stop_line.*print_char_array.*" \ 165 "next over print_int_array in print-all_arrays" 166} else { 167 gdb_test "next" ".*" "" 168} 169 170#call print_double_array(array_d) 171if {![gdb_skip_float_test "print print_double_array(array_d)"] && \ 172 ![gdb_skip_stdio_test "print print_double_array(array_d)"] } { 173 gdb_test_sequence "print print_double_array(array_d)" "" { 174 "array_d :" 175 "\[ \t\r\n\]+=========" 176 "\[ \t\r\n\]+\[ \t\r\n\]+0.000000" 177 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 178 "\[ \t\r\n\]+" 179 } 180} 181 182set stop_line [gdb_get_line_number "-tbreak4-"] 183gdb_test "tbreak $stop_line" \ 184"Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ 185"tbreakpoint at tbreak4" 186 187if {![gdb_skip_float_test "continuing to tbreak4"] && \ 188 ![gdb_skip_stdio_test "continuing to tbreak4"] } { 189 gdb_test_sequence "continue" "continuing to tbreak4" { 190 "Continuing\\..*array_c" 191 "array_f" 192 "\[ \t\r\n\]+array_d :" 193 "\[ \t\r\n\]+=========" 194 "\[ \t\r\n\]+0.000000" 195 "\[ \t\r\n\]+23.456\[0-9\]* 46.913\[0-9\]* 70.370\[0-9\]* 93.826\[0-9\]* 117.283\[0-9\]* 140.740\[0-9\]* 164.196\[0-9\]* 187.653\[0-9\]*" 196 "\[ \t\r\n\]+.*HELLO WORLD.*main \\(\\) at .*call-ar-st.c:\[0-9\]+.*printf\\(.BYE BYE FOR NOW.n.\\)." 197 } 198} else { 199 gdb_test "continue" ".*" "" 200} 201 202 203#call sum_array_print(10, *list1, *list2, *list3, *list4) 204 205if ![gdb_skip_stdio_test "print sum_array_print(...)"] { 206 gdb_test "print sum_array_print(10, *list1, *list2, *list3, *list4)" \ 207 ".*Sum of 4 arrays, by element \\(add in seed as well\\):\[ \t\r\n\]+Seed: 10\[ \t\r\n\]+Element Index . Sum\[ \t\r\n\]+-------------------------\[ \t\r\n\]+.*\[ \t\]+0\[ \t\]+52\[ \t\r\n\]+1\[ \t\]+60\[ \t\r\n\]+2\[ \t\]+68\[ \t\r\n\]+3\[ \t\]+76\[ \t\r\n\]+4\[ \t\]+84\[ \t\r\n\]+5\[ \t\]+92\[ \t\r\n\]+6\[ \t\]+100\[ \t\r\n\]+7\[ \t\]+108\[ \t\r\n\]+8\[ \t\]+116\[ \t\r\n\]+9\[ \t\]+124\[ \t\r\n\]+.*" \ 208 "print sum_array_print(10, *list1, *list2, *list3, *list4)" 209} 210 211#step over 212set stop_line [gdb_get_line_number "-next2-"] 213if ![gdb_skip_stdio_test "next to next2"] { 214 gdb_test "next" \ 215 "BYE BYE FOR NOW.*$stop_line.*printf\\(.VERY GREEN GRASS.n.\\);.*" \ 216 "next to next2" 217} else { 218 gdb_test "next" ".*" "" 219} 220 221#call print_array_rep(\*list1, \*list2, \*list3) 222 223if ![gdb_skip_stdio_test "print print_array_rep(...)"] { 224 gdb_test "print print_array_rep(\*list1, \*list2, \*list3)" \ 225 "Contents of linked list3:.*" \ 226 "print print_array_rep(*list1, *list2, *list3)" 227} 228 229set stop_line [gdb_get_line_number "-tbreak5-"] 230gdb_test "tbreak $stop_line" \ 231 "Temporary breakpoint..* file .*$srcfile, line $stop_line.*" \ 232 "tbreakpoint at tbreak5" 233 234gdb_test "continue" \ 235 "main \\(\\) at .*$srcfile:$stop_line\r\n$stop_line\[\t \]+sum_array_print\\(10, \\*list1, \\*list2, \\*list3, \\*list4\\);.*" \ 236 "continue to tbreak5" 237 238 239# Run into sum_array_print, and verify that the arguments were passed 240# accurately. 241# 242# Note that we shouldn't use a `step' here to get into 243# sum_array_print; GCC may emit calls to memcpy to put the arguments 244# in the right place, and a step may end up in memcpy instead. This 245# may itself be a bug, but it's not the one we're trying to catch 246# here. I've added something to step-test.exp for this. 247gdb_test "break sum_array_print" \ 248 ".*Breakpoint ${decimal}: file .*$srcfile, line.*" \ 249 "set breakpoint in sum_array_print" 250gdb_test_no_output "set print frame-arguments all" 251gdb_test "continue" \ 252 ".*Breakpoint ${decimal}, sum_array_print \\(seed=10, linked_list1=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .4, 6, 8, 10, 12, 14, 16, 18, 20, 22., head = 0., linked_list2=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .8, 10, 12, 14, 16, 18, 20, 22, 24, 26., head = 0., linked_list3=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .10, 12, 14, 16, 18, 20, 22, 24, 26, 28., head = 0., linked_list4=.next_index = .1, 2, 3, 4, 5, 6, 7, 8, 9, 10., values = .20, 22, 24, 26, 28, 30, 32, 34, 36, 38., head = 0.\\) at .*$srcfile:${decimal}\[ \t\n\r\]+${decimal}.*printf\\(.Sum of 4 arrays, by element \\(add in seed as well\\).*\\);.*" \ 253 "check args of sum_array_print" 254 255#call print_array_rep(linked_list1, linked_list2, linked_list3) 256# this calls works from gdb without gdb_expect. But it does seem to hang 257#from within gdb_expect. 258#I comment this out 259#send_gdb "print print_array_rep(linked_list1, linked_list2, linked_list3)\n" 260#gdb_expect { 261# -re ".*Contents of linked list1:\[ \t\n\r\]+Element Value . Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*4.*1\[ \t\n\r\]+.*6.*2\[ \t\n\r\]+.*8.*3\[ \t\n\r\]+.*10.*4\[ \t\n\r\]+.*12.*5\[ \t\n\r\]+.*14.*6\[ \t\n\r\]+.*16.*7\[ \t\n\r\]+.*18.*8\[ \t\n\r\]+.*20.*9\[ \t\n\r\]+.*22.*10\[ \t\n\r\]+Contents of linked list2:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*8.*1\[ \t\n\r\]+.*10.*2\[ \t\n\r\]+.*12.*3\[ \t\n\r\]+.*14.*4\[ \t\n\r\]+.*16.*5\[ \t\n\r\]+.*18.*6\[ \t\n\r\]+.*20.*7\[ \t\n\r\]+.*22.*8\[ \t\n\r\]+.*24.*9\[ \t\n\r\]+.*26.*10\[ \t\n\r\]+Contents of linked list3:\[ \t\n\r\]+Element Value | Index of Next Element\[ \t\n\r\]+-------------------------------------\[ \t\n\r\]+.*\[ \t\n\r\]+.*10.*1\[ \t\n\r\]+.*12.*2\[ \t\n\r\]+.*14.*3\[ \t\n\r\]+.*16.*4\[ \t\n\r\]+.*18.*5\[ \t\n\r\]+.*20.*6\[ \t\n\r\]+.*22.*7\[ \t\n\r\]+.*24.*8\[ \t\n\r\]+.*26.*9\[ \t\n\r\]+.*28.*10\[ \t\n\r\]+.*$gdb_prompt $" { 262# pass "print print_array_rep(linked_list1, linked_list2, linked_list3)" 263# } 264# -re ".*$gdb_prompt $" { fail "print print_array_rep(linked_list1, linked_list2, linked_list3)" } 265# timeout { fail "(timeout) print print_array_rep(linked_list1, linked_list2, linked_list3)" } 266#} 267 268 269set stop_line [gdb_get_line_number "-tbreak6-"] 270gdb_test "tbreak $stop_line" \ 271 "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ 272 "tbreakpoint at tbreak6" 273 274if ![gdb_skip_stdio_test "continuing to tbreak6"] { 275 gdb_test "continue" \ 276 "Continuing\\..*Sum of 4 arrays.*Contents of linked list1.*Contents of two_floats_t.*main \\(\\) at .*$srcfile:$stop_line.*c = 0.*" \ 277 "continue to tbreak6" 278} else { 279 gdb_test "continue" ".*" "" 280} 281 282#call print_small_structs(*struct1, *struct2, *struct3, *struct4, 283# *flags, *flags_combo, *three_char, *five_char, 284# *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) 285 286if {![gdb_skip_float_test "print print_small_structs(...)"] && \ 287 ![gdb_skip_stdio_test "print print_small_structs(...)"] } { 288 gdb_test_sequence "print print_small_structs(*struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_small_structs" { 289 "\[\t\r\n \]+alpha" 290 "\[\t\r\n \]+gamma" 291 "\[\t\r\n \]+epsilon" 292 "\[\t\r\n \]+alpha" 293 "\[\t\r\n \]+gamma" 294 "\[\t\r\n \]+epsilon" 295 "\[\t\r\n \]+ch1: y[ \t]*ch2: n" 296 "\[\t\r\n \]+Contents of three_char_t:" 297 "\[\t\r\n \]+a[ \t]*b[ \t]*c" 298 "\[\t\r\n \]+Contents of five_char_t:" 299 "\[\t\r\n \]+l[ \t]*m[ \t]*n[ \t]*o[ \t]*p" 300 "\[\t\r\n \]+Contents of int_char_combo_t:" 301 "\[\t\r\n \]+123[ \t]*z" 302 "\[\t\r\n \]+Sum of the 4 struct values and seed :" 303 "\[\t\r\n \]+52" 304 "\[\t\r\n \]+Contents of struct1:" 305 "\[\t\r\n \]+6[ \t]*0" 306 "\[\t\r\n \]+Contents of struct2:" 307 "\[\t\r\n \]+10[ \t]*0" 308 "\[\t\r\n \]+Contents of struct3:" 309 "\[\t\r\n \]+12[ \t]*0" 310 "\[\t\r\n \]+Contents of one_double_t:" 311 "\[\t\r\n \]+10.500000" 312 "\[\t\r\n \]+Contents of one_double_t:" 313 "\[\t\r\n \]+-3.375000" 314 "\[\t\r\n \]+Contents of one_double_t:" 315 "\[\t\r\n \]+675.093750" 316 "\[\t\r\n \]+Contents of two_floats_t:" 317 "\[\t\r\n \]+45.234001[ \t]*43.599998" 318 "\[\t\r\n \]+Contents of two_floats_t:" 319 "\[\t\r\n \]+78.010002[ \t]*122.099998" 320 "\[\t\r\n \]+Contents of two_floats_t:" 321 "\[\t\r\n \]+-1232.344971[ \t]*-199.210007" 322 } 323} 324 325#call compute_with_small_structs(20) 326gdb_test "print compute_with_small_structs(20)" \ 327 "\[0-9\]+ = void" \ 328 "print compute_with_small_structs(20)" 329 330 331#call print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 332# 3.14, -5678.12345, -0.11111111, 216.97065) 333 334if {![gdb_skip_float_test "print print_ten_doubles(...)"] && \ 335 ![gdb_skip_stdio_test "print print_ten_doubles(...)"]} { 336 gdb_test_sequence "print print_ten_doubles(123.456, 123.456, -0.12, -1.23, 343434.8, 89.098, 3.14, -5678.12345, -0.11111111, 216.97065)" "print print_ten_doubles" { 337 "\[\t\r\n \]+Two Doubles : 123.45\[0-9\]*.*123.45\[0-9\]*" 338 "\[\t\r\n \]+Two Doubles : -0.1200\[0-9\]*.*-1.2300\[0-9\]*" 339 "\[\t\r\n \]+Two Doubles : 343434.\[0-9\]*.*89.09\[0-9\]*" 340 "\[\t\r\n \]+Two Doubles : 3.1400\[0-9\]*.*-5678.123\[0-9\]*" 341 "\[\t\r\n \]+Two Doubles : -0.1111\[0-9\]*.*216.97\[0-9\]*" 342 } 343} 344 345set stop_line [gdb_get_line_number "-tbreak7-"] 346gdb_test "tbreak $stop_line" \ 347 "Temporary breakpoint .* file .*$srcfile, line $stop_line.*" \ 348 "tbreakpoint at tbreak7" 349 350gdb_test continue "Continuing\\..*main \\(.*\\) at.*$srcfile:$stop_line\[\t\r\n \]+$stop_line.*print_long_arg_list \\( a, b, c, d, e, f, .struct1, .struct2, .struct3, .struct4,.*" "continue to tbreak7" 351 352set stop_line [gdb_get_line_number "-step2-"] 353if { [istarget "hppa*-*-hpux*"] } { 354 # 355 # NOTE:(FIXME) 356 # the aCC demangler cannot demangle the name of a function with >10 args. 357 # so I added a .* after the name of the function, to match the 358 # incredibly long mangled name 359 # (getting aCC's libdemangle.a bundled w/ the system?) 360 # DTS CLLbs16994 coulter 990114 361 # 362 # FIXME: use step for hppa* testing for now 363 # guo 990621 364 # 365 gdb_test "step" \ 366 "print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);" \ 367 "step into print_long_arg_list" 368} else { 369 370 # We can't just assume that a "step" will get us into 371 # print_long_arg_list here,either. 372 gdb_test "tbreak print_long_arg_list" \ 373 "Temporary breakpoint .* file .*$srcfile, line .*" \ 374 "tbreak in print_long_arg_list after stepping into memcpy" 375 # The short match case below handles cases where a buffer 376 # overflows or something, and expect can't deal with the full 377 # line. Perhaps a more elegant solution exists... -sts 1999-08-17 378 if {![gdb_skip_float_test "step into print_long_arg_list"]} { 379 gdb_test_multiple "continue" "step into print_long_arg_list" { 380 -re ".*print_long_arg_list \\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}, five_char=\{ch1 = 108 \'l\', ch2 = 109 \'m\', ch3 = 110 \'n\', ch4 = 111 \'o\', ch5 = 112 \'p\'\}, int_char_combo=\{int1 = 123, ch1 = 122 \'z\'\}, d1=\{double1 = 10.5\}, d2=\{double1 = -3.375\}, d3=\{double1 = 675.09375\}, f1=\{float1 = 45.2340012, float2 = 43.5999985\}, f2=\{float1 = 78.0100021, float2 = 122.099998\}, f3=\{float1 = -1232.34497, float2 = -199.210007\}\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { 381 pass "step into print_long_arg_list" 382 } 383 -re ".*print_long_arg_list.*\\(a=22.25, b=33.375, c=0, d=-25, e=100, f=2345, struct1=\{value = 6, head = 0\}, struct2=\{value = 10, head = 0\}, struct3=\{value = 12, head = 0\}, struct4=\{value = 14, head = 0\}, flags=\{alpha = 1, beta = 0, gamma = 1, delta = 0, epsilon = 1, omega = 0\}, flags_combo=\{alpha = 1, beta = 0, ch1 = 121 \'y\', gamma = 1, delta = 0, ch2 = 110 \'n\', epsilon = 1, omega = 0\}, three_char=\{ch1 = 97 \'a\', ch2 = 98 \'b\', ch3 = 99 \'c\'\}.*\\) at .*${srcfile}:$stop_line\[\r\n\]+$stop_line\[ \t\]+printf\\(\"double :.*\", a\\);.*$gdb_prompt $" { 384 pass "step into print_long_arg_list (short match)" 385 } 386 } 387 } else { 388 # If skipping float tests, don't expect anything in arg list. 389 gdb_test "continue" \ 390 "print_long_arg_list \\(.*\\).*" \ 391 "step into print_long_arg_list" 392 } 393} 394 395set ws "\[\n\r\t \]+" 396 397#call print_small_structs(struct1, struct2, struct3, struct4, flags, 398# flags_combo, three_char, five_char, int_char_combo, 399# d1, d2, d3, f1, f2, f3) 400 401if {![gdb_skip_float_test "print_small_structs from print_long_arg_list"] && \ 402 ![gdb_skip_stdio_test "print_small_structs from print_long_arg_list"] } { 403 404 # On 32-bit SPARC, some of the args are passed by ref, others by 405 # value, and GDB gets confused and says "Invalid cast" because it 406 # thinks it has to cast the structure into a pointer to structure. 407 if { [test_debug_format "stabs"] } then { 408 setup_kfail "gdb/1539" "sparc-*-*" 409 } 410 411 gdb_test_sequence "print print_small_structs(struct1, struct2, struct3, struct4, flags, flags_combo, three_char, five_char, int_char_combo, d1, d2, d3, f1, f2, f3)" "print print_small_structs from print_long_arg_list" { 412 "\[\t\r\n \]+alpha" 413 "\[\t\r\n \]+gamma" 414 "\[\t\r\n \]+epsilon" 415 "\[\t\r\n \]+alpha" 416 "\[\t\r\n \]+gamma" 417 "\[\t\r\n \]+epsilon" 418 "\[\t\r\n \]+ch1: y[ \t]*ch2: n" 419 "\[\t\r\n \]+Contents of three_char_t:" 420 "\[\t\r\n \]+a\[ \t\]*b\[ \t\]*c" 421 "\[\t\r\n \]+Contents of five_char_t:" 422 "\[\t\r\n \]+l\[ \t\]*m\[ \t\]*n\[ \t\]*o\[ \t\]*p" 423 "\[\t\r\n \]+Contents of int_char_combo_t:" 424 "\[\t\r\n \]+123\[ \t\]*z" 425 "\[\t\r\n \]+Sum of the 4 struct values and seed :" 426 "\[\t\r\n \]+52" 427 "\[\t\r\n \]+Contents of struct1:" 428 "\[\t\r\n \]+6\[ \t\]*0" 429 "\[\t\r\n \]+Contents of struct2:" 430 "\[\t\r\n \]+10\[ \t\]*0" 431 "\[\t\r\n \]+Contents of struct3:" 432 "\[\t\r\n \]+12\[ \t\]*0" 433 "\[\t\r\n \]+Contents of one_double_t:" 434 "\[\t\r\n \]+10.500000" 435 "\[\t\r\n \]+Contents of one_double_t:" 436 "\[\t\r\n \]+-3.375000" 437 "\[\t\r\n \]+Contents of one_double_t:" 438 "\[\t\r\n \]+675.093750" 439 "\[\t\r\n \]+Contents of two_floats_t:" 440 "\[\t\r\n \]+45.234001\[ \t\]*43.599998" 441 "\[\t\r\n \]+Contents of two_floats_t:" 442 "\[\t\r\n \]+78.010002\[ \t\]*122.099998" 443 "\[\t\r\n \]+Contents of two_floats_t:" 444 "\[\t\r\n \]+-1232.344971\[ \t\]*-199.210007" 445 } 446} 447 448 449set stop_line [gdb_get_line_number "-tbreak8-"] 450gdb_test "tbreak $stop_line" \ 451 "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ 452 "tbreakpoint at tbreak8" 453 454if ![gdb_skip_stdio_test "continuing to tbreak8"] { 455 gdb_test "continue" "Continuing\\..*Contents of two_floats_t:.*main \\(\\) at.*$srcfile:$stop_line.*$stop_line.*init_bit_flags_combo\\(flags_combo, \\(unsigned\\)1, \\(unsigned\\)0, .y.,.*" \ 456 "continue to tbreak8" 457} else { 458 gdb_test "continue" ".*" "" 459} 460 461#step 462set stop_line [gdb_get_line_number "-step3-"] 463gdb_test "step" \ 464 "init_bit_flags_combo \\(bit_flags_combo=, a=1, b=0, ch1=121 .y., g=1, d=0, ch2=110 .n., e=1, o=0\\) at .*$srcfile:$stop_line\[ \t\n\r\]+$stop_line.*bit_flags_combo->alpha = a;.*" \ 465 "step into init_bit_flags_combo" 466 467#call print_bit_flags_combo(*bit_flags_combo) 468if ![gdb_skip_stdio_test "continuing at step3"] { 469 gdb_test "print print_bit_flags_combo(*bit_flags_combo)" \ 470 "alpha.*gamma.*epsilon.*ch1: y.*ch2: n.*" \ 471 "print print_bit_flags_combo from init_bit_flags_combo" 472} 473 474 475set stop_line [gdb_get_line_number "-tbreak9-"] 476gdb_test "tbreak $stop_line" \ 477 "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ 478 "tbreakpoint at tbreak9" 479 480gdb_test continue "Continuing\\..*main \\(\\) at .*$srcfile:$stop_line\[\r\n\t \]+$stop_line.*init_int_char_combo\\(int_char_combo, 13, .!.\\);.*" \ 481"continue to tbreak9" 482 483#call print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3) 484 485# FIXME: 486# HP aCC demangler currently does not handle hp aCC functions with >10 args 487# DTS CLLbs16994 coulter 990114 488 489if {$hp_aCC_compiler} {setup_xfail "hppa*-*-*" CLLbs16994} 490 491if {![gdb_skip_float_test "print print_long_arg_list"] && \ 492 ![gdb_skip_stdio_test "print print_long_arg_list"] } { 493 gdb_test_sequence "print print_long_arg_list(a, b, c, d, e, f, *struct1, *struct2, *struct3, *struct4, *flags, *flags_combo, *three_char, *five_char, *int_char_combo, *d1, *d2, *d3, *f1, *f2, *f3)" "print print_long_arg_list" { 494 "\[ \n\r\t\]+double : 22.250000" 495 "\[ \n\r\t\]+double : 33.375000" 496 "\[ \n\r\t\]+int : 0" 497 "\[ \n\r\t\]+int : -25" 498 "\[ \n\r\t\]+int : 100" 499 "\[ \n\r\t\]+int : 2345" 500 "\[ \n\r\t\]+alpha" 501 "\[ \n\r\t\]+gamma" 502 "\[ \n\r\t\]+epsilon" 503 "\[ \n\r\t\]+ch1: y\[ \t\]+ch2: n" 504 "\[ \n\r\t\]+Contents of three_char_t:" 505 "\[ \n\r\t\]+x\[ \t\]+y\[ \t\]+z" 506 "\[ \n\r\t\]+Contents of five_char_t:" 507 "\[ \n\r\t\]+h\[ \t\]+e\[ \t\]+l\[ \t\]+l\[ \t\]+o" 508 "\[ \n\r\t\]+Contents of int_char_combo_t:" 509 "\[ \n\r\t\]+123\[ \t\]+z" 510 "\[ \n\r\t\]+Sum of the 4 struct values and seed :" 511 "\[ \n\r\t\]+52" 512 "\[ \n\r\t\]+Contents of struct1:" 513 "\[ \n\r\t\]+6\[ \t\]+0" 514 "\[ \n\r\t\]+Contents of struct2:" 515 "\[ \n\r\t\]+10\[ \t\]+0" 516 "\[ \n\r\t\]+Contents of struct3:" 517 "\[ \n\r\t\]+12\[ \t\]+0" 518 "\[ \n\r\t\]+Contents of one_double_t:" 519 "\[ \n\r\t\]+1.111110" 520 "\[ \n\r\t\]+Contents of one_double_t:" 521 "\[ \n\r\t\]+-345.340000" 522 "\[ \n\r\t\]+Contents of one_double_t:" 523 "\[ \n\r\t\]+546464.200000" 524 "\[ \n\r\t\]+Contents of two_floats_t:" 525 "\[ \n\r\t\]+0.234000\[ \t\]+453.100006" 526 "\[ \n\r\t\]+Contents of two_floats_t:" 527 "\[ \n\r\t\]+78.345001\[ \t\]+23.090000" 528 "\[ \n\r\t\]+Contents of two_floats_t:" 529 "\[ \n\r\t\]+-2.345000\[ \t\]+1.000000" 530 } 531} 532 533 534set stop_line [gdb_get_line_number "-tbreak10-"] 535gdb_test "tbreak $stop_line" \ 536 "Temporary breakpoint.* file .*$srcfile, line $stop_line.*" \ 537 "tbreakpoint at tbreak10" 538 539gdb_test continue "Continuing\\..*main \\(\\) at .*$srcfile:$stop_line\[ \t\n\r\]+$stop_line.*compute_with_small_structs\\(35\\);.*" \ 540"continue to tbreak10" 541 542 543#call sum_struct_print(10, *struct1, *struct2, *struct3, *struct4) 544if ![gdb_skip_stdio_test "print sum_struct_print(...)"] { 545 gdb_test "print sum_struct_print(10,*struct1,*struct2,*struct3,*struct4)" \ 546 "Sum of the 4 struct values and seed :\[ \t\n\r\]+218.*" \ 547 "print sum_struct_print(10, *struct1, *struct2, *struct3, *struct4)" 548} 549 550 551#call print_struct_rep(*struct1, *struct2, *struct3) 552if ![gdb_skip_stdio_test "print print_struct_rep(...)"] { 553 gdb_test_sequence "print print_struct_rep(*struct1, *struct2, *struct3)" \ 554 "print print_struct_rep(*struct1, *struct2, *struct3)" { 555 "\[ \t\n\r\]+Contents of struct1:" 556 "\[ \t\n\r\]+ 22 0" 557 "\[ \t\n\r\]+Contents of struct2:" 558 "\[ \t\n\r\]+ 42 0" 559 "\[ \t\n\r\]+Contents of struct3:" 560 "\[ \t\n\r\]+ 62 0" 561 } 562} 563 564if ![gdb_skip_stdio_test "print print_one_large_struct(...)"] { 565 gdb_test "print print_one_large_struct(*list1)" \ 566 " 4 1.*" \ 567 "print print_one_large_struct(*list1)" 568} 569 570set timeout $oldtimeout 571return 572 573