12007-12-29 H.J. Lu <hongjiu.lu@intel.com> 2 3 * config/tc-i386.c (md_show_usage): Add -mmnemonic, -msyntax, 4 -mindex-reg, -mnaked-reg and -mold-gcc. 5 62007-12-27 John David Anglin <dave.anglin@nrc-cnrc.gc.ca> 7 8 * config/tc-hppa.h (DWARF2_CIE_DATA_ALIGNMENT): Wrap negative 9 number in parens. 10 112007-12-23 H.J. Lu <hongjiu.lu@intel.com> 12 13 * config/tc-i386.c (set_intel_mnemonic): New. 14 (intel_mnemonic): Likewise. 15 (old_gcc): Likewise. 16 (OPTION_MMNEMONIC): Likewise. 17 (OPTION_MSYNTAX): Likewise. 18 (OPTION_MINDEX_REG): Likewise. 19 (OPTION_MNAKED_REG): Likewise. 20 (OPTION_MOLD_GCC): Likewise. 21 (md_pseudo_table): Add .intel_mnemonic and .att_mnemonic. 22 (match_template): Don't allow AT&T/Intel mnemonic if Intel/AT&T 23 mnemonic is specified. Don't allow old gcc support if old_gcc 24 is 0. 25 (md_longopts): Add -mmnemonic, -msyntax, -mindex-reg, 26 -mmnaked-reg and -mold-gcc. 27 (md_parse_option): Handle OPTION_MMNEMONIC, OPTION_MSYNTAX, 28 OPTION_MINDEX_REG, OPTION_MNAKED_REG and OPTION_MOLD_GCC. 29 30 * doc/c-i386.texi: Docoument -mmnemonic, -msyntax, --mnaked-reg 31 and AT&T mnemonic vs. Intel mnemonic. 32 332007-12-20 Bob Wilson <bob.wilson@acm.org> 34 35 * config/tc-xtensa.c (xtensa_elf_cons): Set frag flags for 36 expressions without suffixes. 37 (get_frag_property_flags): Preserve is_no_transform flag for frags 38 not marked as either instructions or literals. 39 402007-12-17 H.J. Lu <hongjiu.lu@intel.com> 41 42 * config/tc-i386.c (output_insn): Use ARRAY_SIZE. 43 (lex_got): Likewise. 44 452007-12-17 H.J. Lu <hongjiu.lu@intel.com> 46 47 * config/tc-i386.c (output_insn): Use FRAG_APPEND_1_CHAR 48 instead of frag_more/md_number_to_chars. 49 (md_short_jump_size): Removed. 50 (md_long_jump_size): Likewise. 51 (md_create_short_jump): Likewise. 52 (md_create_long_jump): Likewise. 53 542007-12-13 Bob Wilson <bob.wilson@acm.org> 55 56 * config/tc-xtensa.c (xg_symbolic_immeds_fit): Relax for weak 57 references but not weak definitions. 58 592007-12-12 Bob Wilson <bob.wilson@acm.org> 60 61 * config/tc-xtensa.c (xg_symbolic_immeds_fit): Do not relax calls to 62 weak symbols if longcalls are disabled. 63 642007-12-11 Sterling Augustine <sterling@tensilica.com> 65 Bob Wilson <bob.wilson@acm.org> 66 67 * config/tc-xtensa.c (frag_format_size): Handle frags that expand to 68 wide branches. 69 (get_aligned_diff): For RELAX_ALIGN_NEXT_OPCODE, skip to the next 70 non-empty frag to find the LOOP instruction. Change comma typo to 71 a semicolon. 72 (relax_frag_immed, convert_frag_immed): Rename wide_insn variable to 73 from_widen_insn. 74 752007-12-11 Alan Modra <amodra@bigpond.net.au> 76 77 * config/tc-m32r.c (md_begin): Mark .sbss as being bss style section. 78 792007-12-10 Richard Sandiford <rsandifo@nildram.co.uk> 80 81 * config/tc-mips.h (mips_nop_opcode): Declare. 82 (NOP_OPCODE): Define. 83 (mips_segment_info): New structure. 84 (TC_SEGMENT_INFO_TYPE): Use it instead of insn_label_list. 85 * config/tc-mips.c (label_list): Adjust for new TC_SEGMENT_INFO_TYPE. 86 (mips_record_mips16_mode): New function. 87 (install_insn): Call it. 88 (mips_align): Likewise. Turn the fill argument into an "int *". 89 Use frag_align_code for code segments if no fill data is given. 90 (s_align): Adjust call accordingly. 91 (mips_nop_opcode): New function. 92 (mips_handle_align): Use the first variable byte to decide which 93 nop sequence is needed. Use md_number_to_chars and mips16_nop_insn. 94 952007-12-07 Bob Wilson <bob.wilson@acm.org> 96 97 * config/tc-xtensa.c (O_pcrel): Define. 98 (suffix_relocs): Add pcrel suffix. 99 (md_pseudo_table): Add 4byte and 2byte directives. 100 (xtensa_elf_cons): Pass correct pcrel argument to fix_new_exp. 101 (xg_assemble_literal): Likewise. Check for O_pcrel. 102 (expression_maybe_register): Reorganize. Handle BFD_RELOC_32_PCREL. 103 (xg_valid_literal_expression): Allow O_pcrel. 104 (md_pcrel_from, md_apply_fix): Handle BFD_RELOC_32_PCREL. 105 (tc_gen_reloc): Fix punctuation in error message. 106 1072007-12-06 Bob Wilson <bob.wilson@acm.org> 108 109 * config/tc-xtensa.c (xg_force_frag_space): Delete. 110 (xg_finish_frag, xg_assemble_literal_space): Replace calls to it. 111 (xtensa_create_property_segments, xtensa_create_xproperty_segments): 112 Set output_section for new property sections. Use subseg_set and 113 seg_info instead of retrieve_segment_info. Adjust arguments to 114 add_xt_block_frags and add_xt_prop_frags. Use standard functions 115 to create frags and fix records. 116 (retrieve_segment_info): Delete. 117 (add_xt_block_frags, add_xt_prop_frags): Replace calls to 118 retrieve_segment_info. Remove unused xt_block_sec arguments. 119 1202007-12-04 Alan Modra <amodra@bigpond.net.au> 121 122 * config/tc-ppc.c (ppc_tc): Allow a space between toc symbol 123 name and bracket. 124 1252007-11-30 Bob Wilson <bob.wilson@acm.org> 126 127 * config/tc-xtensa.h (md_allow_eh_opt): Define. 128 1292007-11-29 Mark Shinwell <shinwell@codesourcery.com> 130 131 * config/tc-mips.c (mips_cpu_info_table): Add loongson2e 132 and loongson2f entries. 133 * doc/c-mips.texi: Document -march=loongson{2e,2f} options. 134 1352007-11-29 Martin Schwidefsky <schwidefsky@de.ibm.com> 136 137 * config/tc-s390.c (md_begin): If the -mesa option is specified 138 add zarch opcodes to the hash table only if there is no variant 139 that is available for the esa mode as well. 140 1412007-11-26 Thomas Ogrisegg <tom-bugs@gas.fnord.at> 142 143 * config/tc-alpha.c (assemble_insn): Don't segv on NULL reloc_operand. 144 1452007-11-19 Bob Wilson <bob.wilson@acm.org> 146 147 * config/xtensa-istack.h (tinsn_struct): Replace linenum field 148 with loc_directive_seen and debug_line. 149 * config/tc-xtensa.c: Include xtensa-istack.h after dwarf2dbg.h. 150 (xg_build_to_insn): Copy the new fields instead of linenum. 151 (xg_build_token_insn): Likewise. Abort on INSTR_LABEL_DEF and move 152 common code out of the switch. 153 (md_assemble): Set new tinsn fields from DWARF information. Call 154 dwarf2_consume_line_info. 155 (xg_assemble_vliw_tokens): Update the code to select the "best" line 156 number to use new information. Call dwarf2_gen_line_info instead 157 of dwarf2_emit_insn. 158 1592007-11-19 Bob Wilson <bob.wilson@acm.org> 160 161 * dwarf2dbg.h (dwarf2_loc_directive_seen): New. 162 * dwarf2dbg.c (loc_directive_seen): Make external and rename to... 163 (dwarf2_loc_directive_seen): ...this. 164 (dwarf2_emit_insn, dwarf2_consume_line_info) 165 (dwarf2_emit_label, dwarf2_directive_loc): Use new name. 166 1672007-11-19 Bob Wilson <bob.wilson@acm.org> 168 169 * dwarf2dbg.c (dwarf2_emit_label): Use dwarf2_consume_line_info. 170 1712007-11-19 Bob Wilson <bob.wilson@acm.org> 172 173 * dwarf2dbg.c (dwarf2_consume_line_info): New. 174 (dwarf2_emit_insn): Use it here. 175 (dwarf2_directive_loc): Fix check for consecutive .loc directives 176 when debug_type is DEBUG_DWARF2. 177 * dwarf2dbg.h (dwarf2_consume_line_info): New prototype. 178 * config/tc-ia64.c (ia64_flush_insns): Call dwarf2_consume_line_info. 179 (md_assemble): Likewise. 180 1812007-11-17 Thiemo Seufer <ths@mips.com> 182 183 * config/tc-mips.c (md_parse_option): Match mips_optimize to the -O 184 option supplied, but still keep mips_optimize == 2 as default value. 185 1862007-11-17 Thiemo Seufer <ths@mips.com> 187 188 * doc/as.texinfo: Document the new attribute value. 189 1902007-11-16 Eric B. Weddington <eric.weddington@atmel.com> 191 192 * config/tc-avr.c (mcu_types): Add ATmega32HVB device. 193 * doc/c-avr.texi: Likewise. 194 1952007-11-16 Eric B. Weddington <eric.weddington@atmel.com> 196 197 * config/tc-avr.c (mcu_types): Add ATmega1284P device. 198 * doc/c-avr.texi: Likewise. 199 2002007-11-14 Tristan Gingold <gingold@adacore.com> 201 202 * config/tc-ia64.c (AR_RUC): Defined. 203 (ar): Add "ar.ruc". 204 (specify_resource): Handle AR_RUC like AR_ITC. 205 2062007-11-13 Nick Clifton <nickc@redhat.com> 207 208 * config/tc-mn10300.c (mn10300_force_relocation): Force a reloc to 209 be generated for alignment fixups. 210 * config/tc-mn10300.h (TC_FORCE_RELOCATION): Call 211 mn10300_force_relocation. 212 2132007-11-12 Nick Clifton <nickc@redhat.com> 214 215 PR gas/5269 216 * config/tc-frv.c (md_show_usage): Rewrite usage description to 217 make it easier to translate. 218 * gas/po/gas.pot: Regenerate. 219 2202007-11-12 Tristan Gingold <gingold@adacore.com> 221 222 * config/tc-ppc.c (md_assemble): If -mregnames, when parsing 223 PPC_OPERAND_CR always parse as expression to allow register name 224 followed by an expression. 225 2262007-11-09 H.J. Lu <hongjiu.lu@intel.com> 227 228 * config/tc-i386.c (match_template): Re-order suffix check. 229 2302007-11-07 Bob Wilson <bob.wilson@acm.org> 231 232 * config/tc-xtensa.c (relaxable_section): Check for .eh_frame. 233 2342007-11-07 Eric B. Weddington <eweddington@cso.atmel.com> 235 236 * config/tc-avr.c (mcu_types): Add ATtiny88 device. 237 * doc/c-avr.texi: Likewise. 238 2392007-11-07 Anatoly Sokolov <aesok@post.ru> 240 241 * config/tc-avr.c (mcu_types): Add new devices: ATmega48P, 242 ATmega88P, ATmega168P, Atmega328P 243 * doc/c-avr.texi: Document new devices. 244 2452007-11-07 Tristan Gingold <gingold@adacore.com> 246 247 * config/tc-ppc.c (md_apply_fix): For PPC_TOC16 on XCOFF, uses 248 offset within the TOC instead of the VMA. 249 2502007-11-06 Paul Brook <paul@codesourcery.com> 251 252 * config/tc-arm.c (do_mull): Allow overlapping Rm for armv6. 253 2542007-11-06 Nick Clifton <nickc@redhat.com> 255 256 * ehopt.c (check_eh_frame): If md_allow_eh_opt is defined, invoke 257 it to see if the optimizations should be applied. 258 * config/tc-mn10300.h (md_allow_eh_opt): Define. Only allow call 259 frame optimization if linker relaxation is not enabled. 260 2612007-11-05 Danny Smith <dannysmith@users.sourceforge.net> 262 263 * read.c (ALIGN_LIMIT): Rename to ... 264 (TC_ALIGN_LIMIT): Guard against prior definition. 265 * config/tc-i386.h (TC_ALIGN_LIMIT)[TE_PE]: Define. 266 2672007-11-01 Sterling Augustine <sterling@tensilica.com> 268 269 * config/tc-xtensa.c (xtensa_symbol_new_hook): New. 270 (xtensa_mark_difference_of_two_symbols): New. 271 (xtensa_post_relax_hook): Call xtensa_mark_difference_of_two_symbols. 272 * config/tc-xtensa.h (xtensa_symfield_type): Add next_expr_symbol. 273 (tc_symbol_new_hook): Define. 274 2752007-11-01 H.J. Lu <hongjiu.lu@intel.com> 276 277 * config/tc-i386.c (md_assemble): Replace no_xsuf with 278 no_ldsuf. 279 (match_template): Likewise. 280 2812007-11-01 H.J. Lu <hongjiu.lu@intel.com> 282 283 * config/tc-i386.h (LONG_DOUBLE_MNEM_SUFFIX): Use a non-ascii 284 letter. 285 2862007-11-01 H.J. Lu <hongjiu.lu@intel.com> 287 288 * config/tc-i386.c (process_suffix): Check addrprefixop0 to 289 see if the address size override prefix changes the size of the 290 first operand. 291 (check_byte_reg): Don't warn if byteokintel is set. 292 (check_long_reg): Set i.suffix to QWORD_MNEM_SUFFIX if toqword 293 is set. 294 (check_qword_reg): Set i.suffix to LONG_MNEM_SUFFIX if todword 295 is set. 296 2972007-10-31 Eric B. Weddington <eweddington@cso.atmel.com> 298 299 * config/tc-avr.c (mcu_types): Remove devices that were never produced: 300 attiny10, atmega83, atmega85, atmega603. 301 * doc/c-avr.texi: Likewise. 302 3032007-10-30 Nick Clifton <nickc@redhat.com> 304 305 * config/tc-mn10300.c (tc_gen_reloc): Fix test that decides when 306 sym_diff relocs should be generated. 307 (md_apply_fix): Skip R_MN10300_ALIGN relocs. 308 (mn10300_fix_adjustable): Do not adjust R_MN10300_ALIGN relocs. 309 (mn10300_handle_align): New function. Generate R_MN10300_ALIGN 310 relocs to record alignment requests. 311 * config/tc-mn10300.h (TC_FORCE_RELOCATION_SUB_SAME): Also force 312 R_MN10300_ALIGN relocs. 313 (HANDLE_ALIGN): Define. Call mn10300_handle_align. 314 3152007-10-30 Nick Clifton <nickc@redhat.com> 316 317 * doc/as.texinfo (Section): Replace "subsegment" with 318 "subsection". 319 3202007-10-27 H.J. Lu <hongjiu.lu@intel.com> 321 322 PR gas/5221 323 * config/obj-elf.c (obj_elf_section): Handle optional 324 parameters for .pushsection. 325 326 * doc/as.texinfo: Document optional parameters for 327 .pushsection. 328 3292007-10-24 H.J. Lu <hongjiu.lu@intel.com> 330 331 * configure.in: Move AM_PROG_LIBTOOL after AC_GNU_SOURCE. 332 * configure: Regenerated. 333 3342007-10-24 Alan Modra <amodra@bigpond.net.au> 335 336 * Makefile.am (INCLUDES, DEP_INCLUDES): Remove -D_GNU_SOURCE. 337 Run "make dep-am". 338 * configure.in: Invoke AC_GNU_SOURCE. 339 * Makefile.in: Regenerate. 340 * config.in: Regenerate. 341 * configure: Regenerate. 342 3432007-10-19 Nick Clifton <nickc@redhat.com> 344 345 * expr.c (expr): Test md_allow_local_subtract (if defined) before 346 allowing the evaluation of an expression involving two symbols 347 defined in the same section. 348 * doc/internals.texi (md_allow_local_subtract): Document the new 349 macro. 350 * config/tc-mn10300.h (md_allow_local_subtract): Define. 351 (RELAX_EXPANSION_POSSIBLE): Define. 352 (MAX_RELOC_EXPANSION): Define. 353 (TC_FRAG_TYPE): Define. 354 * config/tc-mn10300.c (md_assemble): Mark fragments as containing code. 355 (tc_gen_reloc): Return an array of relocs. If necessary generate 356 two relocs to handle an expressions involving the difference of 357 two symbols. 358 (mn10300_fix_adjustable): Do not test TC_FORCE_RELOCATION_LOCAL 359 when then fixup is not pc-relative. 360 (mn10300_allow_local_subtract): New function. Determine when it 361 is safe to compute the difference between two symbols at assemble 362 time. 363 3642007-10-19 Alan Modra <amodra@bigpond.net.au> 365 366 * config/tc-ppc.c (ppc_parse_name): Skip leading '%'. 367 (md_assemble): When parsing PPC_OPERAND_CR, add '%' to set of 368 chars that can start a name. 369 3702007-10-18 Carlos O'Donell <carlos@systemhalted.org> 371 372 * config/tc-hppa.c (pa_ip): Fix comment typo. 373 (pa_comm): Likewise. 374 3752007-10-18 Nick Clifton <nickc@redhat.com> 376 377 PR gas/5172 378 * config/tc-arc.c (md_estimate_size_before_relax): Change error 379 message. 380 (md_convert_frag): Just call abort. 381 * config/tc-i860.c (md_estimate_size_before_relax): Change error 382 message. 383 * config/tc-i860.h (md_convert_frag): Just call abort. 384 * config/tc-ip2k.c (md_estimate_size_before_relax): Change error 385 message. 386 (md_convert_frag): Just call abort. 387 * config/tc-m68k.c (m68k_ip): Do not attempt translation of 388 architecture names. 389 PR gas/5174 390 * config/tc-arm.c: Fix formatting and spelling errors. 391 PR gas/5175 392 * config/tc-xc16x.c: Fix formatting and internationalization. 393 * po/gas.pot: Regenerate. 394 3952007-10-17 Nick Clifton <nickc@redhat.com> 396 397 PR gas/5173 398 * as.h (ieee_md_atof, vax_md_atof): New prototypes. 399 * read.c (s_float_space): Allow a zero length return from md_atof 400 if the error message has been set. 401 (float_cons): Likewise. 402 * config/atof-ieee.c (ieee_md_atof): New function. Performs the 403 md_atof() function in a generic way for IEEE using targets. 404 * config/atof-vax.c (md_atof): Rename to vax_md_atof. Use the 405 same error message as ieee_md_atof. 406 * tc-alpha.c (md_atof): Use ieee_md_atof. Remove #define of vax_md_atof. 407 * tc-arc.c (md_atof): Use ieee_md_atof. 408 * tc-arm.c (md_atof): Use sizeof (LITTLENUM_TYPE) instead of the 409 constant 2. Use a precision of 5 for the 'x' and 'p' types. 410 * tc-avr.c (md_atof): Use ieee_md_atof. 411 * tc-bfin.c (md_atof): Use ieee_md_atof. 412 * tc-cr16.c (md_atof): Use ieee_md_atof. 413 * tc-crx.c (md_atof): Use ieee_md_atof. 414 * tc-d10v.c (md_atof): Use ieee_md_atof. 415 * tc-d30v.c (md_atof): Use ieee_md_atof. 416 * tc-dlx.c (md_atof): Use ieee_md_atof. 417 * tc-fr30.c (md_atof): Use ieee_md_atof. 418 * tc-frv.c (md_atof): Use ieee_md_atof. 419 * tc-h8300.c (md_atof): Use ieee_md_atof. 420 * tc-hppa.c (md_atof): Use ieee_md_atof. 421 * tc-i370.c (md_atof): Use ieee_md_atof. 422 (i370_dc): Convert the 'E' type to 'f' before calling md_atof. 423 * tc-i386.c (md_atof): Use ieee_md_atof. 424 * tc-i860.c (md_atof): Use ieee_md_atof. 425 * tc-i960.c (md_atof): Use ieee_md_atof. 426 * tc-ia64.c (md_atof): Use the same error message as ieee_md_atof. 427 * tc-ip2k.c (md_atof): Use ieee_md_atof. 428 * tc-iq2000.c (md_atof): Use ieee_md_atof. 429 * tc-m32c.c (md_atof): Use ieee_md_atof. 430 * tc-m32r.c (md_atof): Use ieee_md_atof. 431 * tc-m68hc11.c (md_atof): Use ieee_md_atof. 432 * tc-m68k.c (md_atof): Use ieee_md_atof. 433 * tc-maxq.c (md_atof): Use ieee_md_atof. 434 * tc-mcore.c (md_atof): Use ieee_md_atof. 435 * tc-mep.c (md_atof): Use ieee_md_atof. 436 * tc-mips.c (md_atof): Use ieee_md_atof. 437 * tc-mmix.c (md_atof): Use ieee_md_atof. 438 * tc-mn10200.c (md_atof): Use ieee_md_atof. 439 * tc-mn10300.c (md_atof): Use ieee_md_atof. 440 * tc-msp430.c (md_atof): Use ieee_md_atof. 441 * tc-mt.c (md_atof): Use ieee_md_atof. 442 * tc-ns32k.c (md_atof): Use ieee_md_atof. 443 * tc-openrisc.c (md_atof): Use ieee_md_atof. 444 * tc-or32.c (md_atof): Use ieee_md_atof. 445 * tc-pdp11.c (md_atof): New function. Call vax_md_atof. 446 * tc-pj.c (md_atof): Use ieee_md_atof. 447 * tc-ppc.c (md_atof): Use ieee_md_atof. 448 * tc-s390.c (md_atof): Use ieee_md_atof. 449 * tc-score.c (md_atof): Use ieee_md_atof. 450 * tc-sh.c (md_atof): Use ieee_md_atof. 451 * tc-sparc.c (md_atof): Use ieee_md_atof. 452 * tc-spu.c (md_atof): Use ieee_md_atof. 453 * tc-tic30.c (md_atof): Use the same error message as ieee_md_atof. 454 * tc-tic4x.c (md_atof): Use the same error message as ieee_md_atof. 455 * tc-tic54.c (md_atof): Use ieee_md_atof. 456 * tc-v850.c (md_atof): Use ieee_md_atof. 457 * tc-vax.c (md_atof): New function. Call vax_md_atof. 458 * tc-xc16x.c (md_atof): Use ieee_md_atof. 459 * tc-xstormy16.c (md_atof): Use ieee_md_atof. 460 * tc-xtensa.c (md_atof): Use ieee_md_atof. 461 * tc-z8k.c (md_atof): Use ieee_md_atof. 462 * doc/internals.texi: Update description of md_atof function. 463 * po/gas.pot: Regenerate. 464 4652007-10-16 Bob Wilson <bob.wilson@acm.org> 466 467 * doc/as.texinfo (Overview): Add Xtensa --rename-section option. 468 4692007-10-16 Nick Clifton <nickc@redhat.com> 470 471 * config/obj-elf.c (obj_elf_type): Accept "common" as a valid 472 symbol type. 473 * doc/as.texinfo (.type): Document the types accepted by the 474 type pseudo op, including "common". 475 4762007-10-15 Peter Bergner <bergner@vnet.ibm.com> 477 478 * config/tc-ppc.c (ppc_setup_opcodes): Verify instructions are sorted 479 according to major opcode number. 480 4812007-10-15 Alan Modra <amodra@bigpond.net.au> 482 483 * read.c (do_s_func): Check asprintf return status. 484 * stabs.c (stabs_generate_asm_func): Likewise. 485 (stabs_generate_asm_endfunc): Likewise. 486 4872007-10-12 H.J. Lu <hongjiu.lu@intel.com> 488 489 * config/tc-i386.c (process_operands): Simplify implicit xmm0 490 handling. 491 4922007-10-12 H.J. Lu <hongjiu.lu@intel.com> 493 494 * config/tc-i386.c (process_operands): Check the firstxmm0 495 field in opcode_modifier for instruction with a implicit 496 xmm0 as the first operand. 497 4982007-10-12 Eric B. Weddington <eweddington@cso.atmel.com> 499 500 * config/tc-avr.c (mcu_types): Add new devices: AT90PWM2B, 501 AT90PWM3B. 502 * doc/c-avr.texi: Document new devices. 503 5042007-10-12 M R Swami Reddy <MR.Swami.Reddy@nsc.com> 505 506 * config/tc-cr16.c: Update the md_relax_table for 1 word b<cc> 507 instruction range information. 508 5092007-10-12 Daniel Jacobowitz <dan@codesourcery.com> 510 511 * doc/as.texinfo (Object Attributes): New chapter. 512 (Pseudo Ops): Document .gnu_attribute. 513 (LNS directives): Correct .loc_mark_labels documentation. 514 5152007-10-11 Nick Clifton <nickc@redhat.com> 516 517 * config/obj-elf.c (obj_elf_section): When pushing a section, if 518 there is a comma then the following argument must be a subsection 519 number. 520 5212007-10-11 H.J. Lu <hongjiu.lu@intel.com> 522 523 * doc/c-i386.texi: Update which instruction's operands are 524 swapped. 525 5262007-10-11 Nick Clifton <nickc@redhat.com> 527 528 PR gas/5161 529 * config/tc-ia64.c: Allow for translations of error and warning 530 messages. 531 * po/gas.pot: Regenerate. 532 533 PR gas/5158 534 * config/tc-h8300.c (tc_gen_reloc): Allow for translation of error 535 message. 536 * po/gas.pot: Regenerate. 537 538 PR gas/5155 539 * config/tc-msp430.c: Fix spelling typos. 540 5412007-10-11 Nick Clifton <nickc@redhat.com> 542 543 * doc/as.texinfo (Type): Fix typo: STT_FUNC not STT_FUNCTION. 544 5452007-10-08 Maciej W. Rozycki <macro@linux-mips.org> 546 547 * config/tc-mips.c (AT): Rename to... 548 (ATREG): ... this. 549 (AT): New definition. 550 (mips_set_options): Rename "noat" to "at"; change the type. 551 (mips_opts): Update accordingly. 552 (append_insn): Likewise. 553 (macro_build_ldst_constoffset): Likewise. 554 (load_address): Likewise. 555 (macro, macro2): Likewise. 556 (s_mipsset): Handle ".set at=REG". Update handling of ".set at" 557 and ".set noat". 558 5592007-10-08 Nick Clifton <nickc@redhat.com> 560 561 * doc/as.texinfo (Previous): Clarify explanation of the behaviour 562 of this pseudo-op and add a couple of examples. 563 5642007-10-08 Nick Clifton <nickc@redhat.com> 565 566 PR gas/5121 gas/5122 gas/5123 567 * Makefile.am (CFILES): Add cgen.c 568 (TARGET_CPU_CFILES): Add tc-iq2000.c, tc-maxq.c, tc-mt.c, 569 tc-tic4x.c and xtensa-relax.c. 570 (TARGET_CPU_HFILES): Add tc-iq2000.h, tc-maxq.h, tc-mt.h, 571 tc-tic4x.h and xtensa-relax.h. 572 (TARG_ENV_HFILES): Remove te-aux.h, te-delta.h, te-delt88.h, 573 te-ic960.h, te-linux.h. Add te-aix5.h, te-armeabi.h, 574 te-freebsd.h, te-gnu.h, te-interix.h, te-vxworks.h. 575 (CONFIG_ATOF_CFILES): New variable. 576 (POTFILES): Add CONFIG_ATOF_CFILES to dependencies. Fix typo with 577 dependency upon TARG_ENV_HFILES. 578 (DEPTC): Do not put "#include opcodes/<foo>-desc.h" into 579 cgen-desc.h when foo-desc.h does not exit. 580 Run make dep-am. 581 * Makefile.in: Regenerate. 582 * doc/Makefile.in: Regenerate. 583 * po/POTFILES.in: Regenerate. 584 PR gas/5124 gas/5125 585 * po/es.po: Regenerate. 586 * po/fr.po: Regenerate. 587 * po/gas.pot: Regenerate. 588 * po/rw.po: Regenerate. 589 * po/tr.po: Regenerate. 590 * config/obj-elf.c (obj_elf_vtable_inherit): Allow for translation 591 of error messages. 592 PR gas/5126 593 * config/obj-som.c: Likewise. 594 PR gas/5129 595 * config/tc-arc.c: Likewise. 596 PR gas/5131 gas/5132 597 * config/tc-arm.c: Likewise. 598 PR gas/5137 599 * config/tc-bfin.c: Likewise. 600 PR gas/5143 601 * config/tc-frv.c: Likewise. 602 PR gas/5142 603 * config/tc-dlx.c: Likewise. 604 6052007-10-08 Eric B. Weddington <eweddington@cso.atmel.com> 606 607 * config/tc-avr.c (mcu_types): Add new devices: ATtiny43U, 608 ATtiny48, AT90PWM216, AT90PWM316. 609 * doc/c-avr.texi: Document new devices. 610 6112007-10-08 Nick Clifton <nickc@redhat.com> 612 613 PR gas/5133 614 * config/tc-arm.c (md_apply_fix): Correct error message. 615 PR gas/5134 616 * config/tc-arm.c (md_apply_fix): Likewise. 617 PR gas/5136 618 * config/tc-bfin.c (md_apply_fix): Fix error message. 619 PR gas/5135 620 (Expr_Node_Gen_Reloc_R): Fix spelling typos in error messages. 621 6222007-10-05 H.J. Lu <hongjiu.lu@intel.com> 623 624 * config/tc-i386.c (build_modrm_byte): Check the first 2 8bit 625 immediate operands directly for instructions with 4 operands. 626 6272007-10-04 H.J. Lu <hongjiu.lu@intel.com> 628 629 PR gas/5109 630 * config/tc-i386.c (process_suffix): Clear QWORD suffix if it 631 is ignored in Intel mode. 632 6332007-10-04 Helge Deller <deller@gmx.de> 634 635 * read.c (potable): Add string8, string16, string32 and string64. 636 Add bit size for stringer function. 637 (stringer_append_char): New. 638 (stringer): Use stringer_append_char(). 639 * config/obj-coff.c (obj_coff_ident): Add bit size for stringer function. 640 * config/obj-elf.c (obj_elf_ident): Likewise. 641 * config/tc-alpha.c (s_alpha_stringer): Likewise. 642 * config/tc-dlx.c (dlx_pseudo_table): Likewise. 643 * config/tc-hppa.c (pa_stringer): Likewise. 644 * config/tc-ia64.c (md_pseudo_table, pseudo_opcode): Likewise. 645 * config/tc-m68hc11.c (md_pseudo_table): Likewise. 646 * config/tc-mcore.c (md_pseudo_table): Likewise. 647 * config/tc-mips.c (mips_pseudo_table): Likewise. 648 * config/tc-spu.c (md_pseudo_table): Likewise. 649 * config/tc-s390.c (md_pseudo_table): Likewise. Replace '2' by '1'. 650 * doc/as.texinfo (ABORT): Fix identing. 651 (String): Document new string8, string16, string32, string64 652 functions. 653 * NEWS: Mention the new feature. 654 6552007-10-03 Nick Clifton <nickc@redhat.com> 656 657 PR gas/5078 658 * config/tc-avr.c (avr_get_constant): Extend error message to 659 mention that the constant must be positive. 660 6612007-10-03 Nick Clifton <nickc@redhat.com> 662 663 * config/tc-avr.c (avr_get_constant): 664 PR gas/5089 665 * config/tc-arm.c (s_arm_unwind_handlerdata): Fix spelling typo. 666 PR gas/5090 667 (md_assemble): Fix spelling typo. 668 6692007-10-03 Alan Modra <amodra@bigpond.net.au> 670 671 PR 4303 672 * stabs.c (aout_process_stab): Set BSF_DEBUGGING. 673 6742007-10-01 M R Swami Reddy <MR.Swami.Reddy@nsc.com> 675 676 * config/tc-cr16.c: Replaced 'tabs' with white spaces and 677 added R_CR16_DISP8 as default reloc type for b<cc> instructions. 678 6792007-09-30 H.J. Lu <hongjiu.lu@intel.com> 680 681 PR gas/5080 682 * config/tc-i386.c (check_long_reg): Also handle cvttss2si. 683 (check_qword_reg): Also handle cvttsd2si. 684 6852007-09-27 Kazu Hirata <kazu@codesourcery.com> 686 687 * config/m68k-parse.h (m68k_register): Use MBO instead of MBB. 688 (last_movec_reg): Change to MBO. 689 * config/tc-m68k.c (fido_ctrl): Use MBO instead of MBB. 690 (m68k_ip): Use MBO instead of MBO. 691 (init_table): Use MBO instead of MBO. Add an entry for mbo. 692 6932007-09-26 Jan Beulich <jbeulich@novell.com> 694 695 * config/tc-i386.c (build_modrm_byte): Also check for RegEip 696 when considering IP-relative addressing. 697 6982007-09-26 Jan Beulich <jbeulich@novell.com> 699 700 * config/tc-i386.h (md_register_arithmetic): Define. 701 * config/tc-ia64.h (md_register_arithmetic): Likewise. 702 * doc/internals.texi: Document md_register_arithmetic. 703 * expr.c (make_expr_symbol): Force O_register expressions into 704 reg_section. 705 (expr): Provide default for md_register_arithmetic. Don't resolve 706 adding/subtracting constants to/from registers if 707 md_register_arithmetic is zero. 708 7092007-09-26 Jan Beulich <jbeulich@novell.com> 710 711 * dw2gencfi.c: Conditionalize whole body upon TARGET_USE_CFIPOP. 712 (cfi_finish): Add second empty instance. 713 7142007-09-26 Jan Beulich <jbeulich@novell.com> 715 716 * config/tc-ia64.c (dot_pred_rel): Replace specialized handling 717 with simple call to parse_operand. 718 7192007-09-26 Jan Beulich <jbeulich@novell.com> 720 721 * config/tc-i386.c (NUM_FLAG_CODE): Remove. 722 7232007-09-26 Jan Beulich <jbeulich@novell.com> 724 725 * as.c (itbl_parse): Remove #define. 726 (struct itbl_file_list): Move down and ... 727 (itbl_files): .. conditionalize upon HAVE_ITBL_CPU. 728 (show_usage): Conditionalize printing of --itbl option upon 729 HAVE_ITBL_CPU. 730 (parse_args): Conditionalize handling of -t/--itbl options upon 731 HAVE_ITBL_CPU. Remove OPTION_INSTTBL and replace its use with 732 't'. 733 7342007-09-25 H.J. Lu <hongjiu.lu@intel.com> 735 736 * config/tc-i386.c (output_insn): Use i.tm.opcode_length to 737 check opcode length. 738 7392007-09-25 Nathan Sidwell <nathan@codesourcery.com> 740 741 * config/tc-m68k.c (LONG_BRANCH_VIA_COND): New. 742 (BRANCHBWPL, FRAG_VAR_SIZE): New. 743 (md_relax_table): Add BRANCHBWPL entries. 744 (m68k_ip): Choose BRANCHBWPL relaxation if necessary. 745 (md_assemble): Use FRAG_VAR_SIZE. 746 (md_convert_frag_1): Add BRANCHBWPL cases. 747 (md_estimate_size_before_relaz): Likewise. 748 7492007-09-24 Carlos O'Donell <carlos@codesourcery.com> 750 751 * config/tc-mips.c (s_align): Set max_alignment to 28. 752 7532007-09-20 H.J. Lu <hongjiu.lu@intel.com> 754 755 PR 658 756 * config/tc-i386.c (SCALE1_WHEN_NO_INDEX): Removed. 757 (set_allow_index_reg): New. 758 (allow_index_reg): Likewise. 759 (md_pseudo_table): Add "allow_index_reg" and 760 "disallow_index_reg". 761 (build_modrm_byte): Set i.sib.index to NO_INDEX_REGISTER for 762 fake index registers. 763 (i386_scale): Updated. 764 (i386_index_check): Support fake index registers. 765 (parse_real_register): Return NULL on eiz/riz if fake index 766 registers aren't allowed. 767 7682007-09-19 Nick Clifton <nickc@redhat.com> 769 770 * config/tc-h8300.c (md_apply_fix): Do not abort or handle 8 byte 771 fixups. 772 7732007-09-19 Bob Wilson <bob.wilson@acm.org> 774 775 * doc/c-xtensa.texi (Xtensa Immediate Relaxation): Fix "addi" typo. 776 7772007-09-18 Bernd Schmidt <bernd.schmidt@analog.com> 778 779 * config/bfin-parse.y (asm_1): Slightly improve error messages 780 for "reg += const;". 781 7822007-09-18 Alan Modra <amodra@bigpond.net.au> 783 784 PR gas/5026 785 * read.c (emit_expr): Only use long long if required and available. 786 7872007-09-17 H.J. Lu <hongjiu.lu@intel.com> 788 789 * config/tc-i386.c (baseindex): Removed. 790 (build_modrm_byte): Check reg_num for RIP register instead of 791 reg_type. 792 (i386_index_check): Likewise. 793 7942007-09-17 H.J. Lu <hongjiu.lu@intel.com> 795 796 PR gas/5035 797 * config/obj-coff.c (obj_coff_endef): Remove checking size of 798 def_symbol_in_progress. 799 8002007-09-17 Evandro Menezes <evandro@yahoo.com> 801 802 PR gas/5026 803 * read.c (emit_expr): Use unsigned long long values in warning 804 message about truncated expressions. 805 8062007-09-17 H.J. Lu <hongjiu.lu@intel.com> 807 808 * config/tc-i386.c (intel_e04): Revert the last change. 809 8102007-09-17 Nick Clifton <nickc@redhat.com> 811 812 * po/es.po: Updated Spanish translation. 813 8142007-09-15 H.J. Lu <hongjiu.lu@intel.com> 815 816 PR gas/5034 817 * config/tc-i386.c (intel_e04): Return 1 if cur_token.code is 818 T_NIL. 819 8202007-09-14 H.J. Lu <hongjiu.lu@intel.com> 821 822 * config/tc-i386.c (build_modrm_byte): Adjust comment line 823 wrap. 824 8252007-09-14 H.J. Lu <hongjiu.lu@intel.com> 826 827 * config/tc-i386.c (build_modrm_byte): Use (A || B) instead 828 of (A || B) != 0. 829 8302007-09-14 H.J. Lu <hongjiu.lu@intel.com> 831 832 * config/tc-i386.c (build_modrm_byte): Adjust indentation. 833 8342007-09-14 Michael Meissner <michael.meissner@amd.com> 835 Dwarakanath Rajagopal <dwarak.rajagopal@amd.com> 836 Tony Linthicum <tony.linthicum@amd.com> 837 838 * NEWS: Add SSE5 support to NEWS file. 839 840 * config/tc-i386.h (drex_byte): Add fields to allow process_drex 841 and build_modrm_byte to communicate. 842 (DREX_OC0): New SSE5 macro. 843 (DREX_OC0_MASK): Ditto. 844 (DREX_OC1): Ditto. 845 (DREX_OC1_MASK): Ditto. 846 (DREX_XMEM_X1_X2_X2): Ditto. 847 (DREX_X1_XMEM_X2_X2): Ditto. 848 (DREX_X1_XMEM_X2_X1: Ditto. 849 (DREX_X1_X2_XMEM_X1: Ditto. 850 (DREX_XMEM_X1_X2): Ditto. 851 (DREX_X1_XMEM_X2): Ditto. 852 (drex_byte): New structure to describe the DREX byte. 853 854 * config/tc-i386.c (process_drex): New function to handle SSE5 855 DREX bits. 856 (build_modrm_byte): Use the information cached away in 857 process_drex in the case of DREX instructions. 858 (i386_insn): Add drex field. 859 (pi): Add debugging of drex field. 860 (md_assemble): Treat SSE5 like SSE3 in instructions with an 861 immediate byte. Move REX field to DREX if this is a DREX 862 instruction. 863 (process_operands): Add SSE5 support. 864 (build_modrm_byte): Ditto. 865 (output_insn): Ditto. 866 (cpu_arch): Ditto. 867 (i386_align_code): Ditto. 868 8692007-09-12 Jan Beulich <jbeulich@novell.com> 870 871 * config/tc-i386.c (md_assemble): Move handling of extrq/insertq 872 after generic operand swapping, and swap only the immediate operands. 873 8742007-09-11 Nathan Sidwell <nathan@codesourcery.com> 875 876 * config/tc-m68k.c (m68k_ip): Add mcfisa_c case. 877 (m68k_elf_final_processing): Add EF_M68K_CF_ISA_C_NODIV. 878 8792007-09-09 H.J. Lu <hongjiu.lu@intel.com> 880 881 * tc-i386.c (output_insn): Only check SSE4.2 and ABM for 3 882 byte opcode. 883 8842007-09-08 H.J. Lu <hongjiu.lu@intel.com> 885 886 * config/tc-i386.c (cpu_flags_check_x64): Renamed to ... 887 (cpu_flags_check_cpu64): This. Inline. 888 (uints_all_zero): New. 889 (uints_set): Likewise 890 (uints_equal): Likewise 891 (UINTS_ALL_ZERO): Likewise 892 (UINTS_SET): Likewise 893 (UINTS_CLEAR): Likewise 894 (UINTS_EQUAL): Likewise 895 (cpu_flags_and): Likewise. 896 (cpu_flags_or): Likewise. 897 (operand_type_and): Likewise. 898 (operand_type_or): Likewise. 899 (operand_type_xor): Likewise. 900 (cpu_flags_not): Inline and use switch instead of loop. 901 (cpu_flags_match): Updated. 902 (operand_type_match): Likewise. 903 (smallest_imm_type): Likewise. 904 (set_cpu_arch): Likewise. 905 (pt): Likewise. 906 (md_assemble): Likewise. 907 (parse_insn): Likewise. 908 (optimize_imm): Likewise. 909 (match_template): Likewise. 910 (process_suffix): Likewise. 911 (update_imm): Likewise. 912 (finalize_imm): Likewise. 913 (process_operands): Likewise. 914 (build_modrm_byte): Likewise. 915 (i386_immediate): Likewise. 916 (i386_displacement): Likewise. 917 (i386_index_check): Likewise. 918 (i386_operand): Likewise. 919 (i386_target_format): Likewise. 920 (intel_e11): Likewise. 921 (operand_type): Remove implicitregister. 922 (operand_type_check): Updated. Inline. 923 (cpu_flags_all_zero): Removed. 924 (operand_type_all_zero): Likewise. 925 (i386_array_biop): Likewise. 926 (cpu_flags_biop): Likewise. 927 (operand_type_biop): Likewise. 928 9292007-09-08 H.J. Lu <hongjiu.lu@intel.com> 930 931 * Makefile.am: Run "make dep-am". 932 * Makefile.in: Regenerate. 933 9342007-09-08 H.J. Lu <hongjiu.lu@intel.com> 935 936 * configure.in (AC_CHECK_HEADERS): Add limits.h. 937 * configure: Regenerated. 938 * config.in: Likewise. 939 940 * config/tc-i386.c: Include "opcodes/i386-init.h". 941 (_i386_insn): Use i386_operand_type for types. 942 (cpu_arch_flags): Updated to new types with bitfield. 943 (cpu_arch_tune_flags): Likewise. 944 (cpu_arch_isa_flags): Likewise. 945 (cpu_arch): Likewise. 946 (i386_align_code): Likewise. 947 (set_code_flag): Likewise. 948 (set_16bit_gcc_code_flag): Likewise. 949 (set_cpu_arch): Likewise. 950 (md_assemble): Likewise. 951 (parse_insn): Likewise. 952 (process_operands): Likewise. 953 (output_branch): Likewise. 954 (output_jump): Likewise. 955 (parse_real_register): Likewise. 956 (mode_from_disp_size): Likewise. 957 (smallest_imm_type): Likewise. 958 (pi): Likewise. 959 (type_names): Likewise. 960 (pt): Likewise. 961 (pte): Likewise. 962 (swap_2_operands): Likewise. 963 (optimize_imm): Likewise. 964 (optimize_disp): Likewise. 965 (match_template): Likewise. 966 (check_string): Likewise. 967 (process_suffix): Likewise. 968 (check_byte_reg): Likewise. 969 (check_long_reg): Likewise. 970 (check_qword_reg): Likewise. 971 (check_word_reg): Likewise. 972 (finalize_imm): Likewise. 973 (build_modrm_byte): Likewise. 974 (output_insn): Likewise. 975 (disp_size): Likewise. 976 (imm_size): Likewise. 977 (output_disp): Likewise. 978 (output_imm): Likewise. 979 (gotrel): Likewise. 980 (i386_immediate): Likewise. 981 (i386_displacement): Likewise. 982 (i386_index_check): Likewise. 983 (i386_operand): Likewise. 984 (parse_real_register): Likewise. 985 (i386_intel_operand): Likewise. 986 (intel_e09): Likewise. 987 (intel_bracket_expr): Likewise. 988 (intel_e11): Likewise. 989 (cpu_arch_flags_not): New. 990 (cpu_flags_check_x64): Likewise. 991 (cpu_flags_all_zero): Likewise. 992 (cpu_flags_not): Likewise. 993 (i386_cpu_flags_biop): Likewise. 994 (cpu_flags_biop): Likewise. 995 (cpu_flags_match); Likewise. 996 (acc32): New. 997 (acc64): Likewise. 998 (control): Likewise. 999 (reg16_inoutportreg): Likewise. 1000 (disp16): Likewise. 1001 (disp32): Likewise. 1002 (disp32s): Likewise. 1003 (disp16_32): Likewise. 1004 (anydisp): Likewise. 1005 (baseindex): Likewise. 1006 (regxmm): Likewise. 1007 (imm8): Likewise. 1008 (imm8s): Likewise. 1009 (imm16): Likewise. 1010 (imm32): Likewise. 1011 (imm32s): Likewise. 1012 (imm64): Likewise. 1013 (imm16_32): Likewise. 1014 (imm16_32s): Likewise. 1015 (imm16_32_32s): Likewise. 1016 (operand_type): Likewise. 1017 (operand_type_check): Likewise. 1018 (operand_type_match): Likewise. 1019 (operand_type_register_match): Likewise. 1020 (update_imm): Likewise. 1021 (set_code_flag): Also update cpu_arch_flags_not. 1022 (set_16bit_gcc_code_flag): Likewise. 1023 (md_begin): Likewise. 1024 (parse_insn): Use cpu_flags_check_x64 to check 64bit support. 1025 Use cpu_flags_match to match instructions. 1026 (i386_target_format): Update cpu_arch_isa_flags and 1027 cpu_arch_tune_flags to i386_cpu_flags type with bitfield. 1028 (smallest_imm_type): Check cpu_arch_tune to tune for i486. 1029 (match_template): Don't initialize overlap0, overlap1, 1030 overlap2, overlap3 and operand_types. 1031 (process_suffix): Handle crc32 with 64bit register. 1032 (MATCH): Removed. 1033 (CONSISTENT_REGISTER_MATCH): Likewise. 1034 1035 * config/tc-i386.h (arch_entry): Updated to i386_cpu_flags 1036 type. 1037 10382007-09-06 H.J. Lu <hongjiu.lu@intel.com> 1039 1040 * config/tc-i386.c (match_template): Handle invlpga, vmload, 1041 vmrun and vmsave in SVME. 1042 (process_suffix): Likewise. 1043 10442007-09-05 H.J. Lu <hongjiu.lu@intel.com> 1045 1046 * config/tc-i386.c (i386_index_check): Don't use RegRex 1047 on the reg_type field. 1048 (parse_real_register): Use `||' instead of `|'. 1049 10502007-09-04 H.J. Lu <hongjiu.lu@intel.com> 1051 1052 * config/tc-i386.c (process_operands): Remove segment override 1053 check on SVME instructions. 1054 (i386_index_check): Remove memory operand check on SVME 1055 instructions. 1056 10572007-09-04 Alan Modra <amodra@bigpond.net.au> 1058 1059 * config/tc-spu.c (struct spu_insn): Delete "flag". Add "reloc". 1060 (md_assemble): Update init of insn. Use insn.reloc instead of 1061 calculating from flag. 1062 (get_imm): Set reloc rather than flag. 1063 (calcop): Formatting. 1064 10652007-08-29 Daniel Jacobowitz <dan@codesourcery.com> 1066 1067 * dwarf2dbg.c (dwarf2_directive_loc): Emit duplicate .loc directives. 1068 10692007-08-28 Daniel Jacobowitz <dan@codesourcery.com> 1070 1071 * doc/c-arc.texi: Fix typo. 1072 10732007-08-28 H.J. Lu <hongjiu.lu@intel.com> 1074 1075 * config/tc-i386.c (process_suffix): Handle cmpxchg8b in 1076 Intel mode. 1077 10782007-08-28 Nathan Sidwell <nathan@codesourcery.com> 1079 1080 * config/tc-m68k.c (mcf52235_ctrl): Add cache registers. 1081 (mcf5253_ctrl): Add RAMBAR, MBAR, MBAR2. 1082 (mcf5407_ctrl): New. 1083 (m68k_cpus): Adjust 5407 entry. 1084 10852007-08-28 Maxim Kuvyrkov <maxim@codesourcery.com> 1086 1087 * config/tc-m68k.c (mcf51qe_ctrl): Define 51QE control registers. 1088 (m68k_cpus): Define 51QE cpu. 1089 10902007-08-28 Mark Shinwell <shinwell@codesourcery.com> 1091 Joseph Myers <joseph@codesourcery.com> 1092 1093 * as.c (main): Flush stderr before printing listings to ensure 1094 consistent output order across platforms. 1095 10962007-08-28 Robert Sebastian Gerus <arachnist@gmail.com> 1097 1098 * configure.tgt: Add support for i[3-7]86-*-dragonfly*. 1099 11002007-08-24 Joseph Myers <joseph@codesourcery.com> 1101 Paul Brook <paul@codesourcery.com> 1102 1103 * remap.c: New. 1104 * as.h (remap_debug_filename, add_debug_prefix_map): Declare. 1105 * as.c (show_usage): Document --debug-prefix-map option. 1106 (parse_args): Handle --debug-prefix-map. 1107 * dwarf2dbg.c (out_file_list, out_debug_info): Remap debug paths. 1108 * stabs.c (stabs_generate_asm_file): Remap debug paths. 1109 * Makefile.am (GAS_CFILES): Add remap.c 1110 (GENERIC_OBJS): Add remap.o. 1111 Regenerate dependencies. 1112 * Makefile.in: Regenerate. 1113 * doc/as.texinfo (--debug-prefix-map): Document. 1114 11152007-08-24 Aurelien Jarno <aurel32@debian.org> 1116 1117 * config/tc-arm.c (md_apply_fix): Cast bfd_vma values to long 1118 before printing them. 1119 11202007-08-24 Anders Waldenborg <anders@0x63.nu> 1121 Alan Modra <amodra@bigpond.net.au> 1122 1123 * config/tc-i386.c (lex_got): Don't scan past a comma. 1124 11252007-08-23 Ben Elliston <bje@au.ibm.com> 1126 1127 * config/tc-ppc.c (parse_cpu): Handle "750cl". 1128 (pre_defined_registers): Add "gqr0" to "gqr7", "gqr.0" to "gqr.7". 1129 (md_show_usage): Document -m750cl. 1130 (md_assemble): Handle two delimiters in succession (eg. `),'). 1131 * doc/c-ppc.texi (PowerPC-Opts): Document -m750cl. 1132 * testsuite/gas/ppc/ppc.exp: Run ppc70ps dump tests. 1133 * testsuite/gas/ppc/ppc750ps.s: New file. 1134 * testsuite/gas/ppc/ppc750ps.d: Likewise. 1135 11362007-08-23 Ben Elliston <bje@au.ibm.com> 1137 1138 * doc/c-arm.texi (ARM Directives): Move brackets out of @vars. 1139 11402007-08-17 Alan Modra <amodra@bigpond.net.au> 1141 1142 PR gas/4079 1143 * config/tc-i386.c (x86_cons): Complain about invalid @got etc. 1144 expressions. 1145 (i386_immediate): Detect and complain about more cases of 1146 invalid immediate expressions. Return failure rather than 1147 converting them to zero. 1148 (i386_displacement): Likewise. 1149 11502007-08-17 Alan Modra <amodra@bigpond.net.au> 1151 1152 * po/Make-in: Add --msgid-bugs-address to xgettext invocation. 1153 11542007-08-14 Andreas Schwab <schwab@suse.de> 1155 1156 * config/tc-ia64.c (tc_gen_reloc): Return NULL if relocation is 1157 unrepresentable. 1158 11592007-08-12 Matthias Klose <doko@ubuntu.com> 1160 1161 * doc/Makefile.am (AM_MAKEINFOFLAGS, TEXI2DVI): Include 1162 $(top_srcdir)/../../bfd/doc. 1163 * doc/Makefile.in: Regenerate. 1164 11652007-08-10 Nick Clifton <nickc@redhat.com> 1166 1167 * NEWS: Add a marker for the 2.18 features. 1168 11692007-08-09 Paul Brook <paul@codesourcery.com> 1170 1171 * config/tc-arm.c (relaxed_symbol_addr): Compensate for alignment. 1172 11732007-08-09 H.J. Lu <hongjiu.lu@intel.com> 1174 1175 * config/tc-i386.c (check_byte_reg): Support pextrb and pinsrb. 1176 11772007-07-29 H.J. Lu <hongjiu.lu@intel.com> 1178 1179 * config/tc-i386.c (check_long_reg): Allow cvtss2si to convert 1180 DWORD memory to Reg64 in Intel synax. 1181 (check_qword_reg): Allow cvtsd2si to convert QWORD memory to 1182 Reg32 in Intel syntax. 1183 11842007-07-25 Sterling Augustine <sterling@tensilica.com> 1185 1186 * config/tc-xtensa.c (xtensa_extui_opcode): New. 1187 (xg_expand_assembly_insn): Check for invalid extui operands. 1188 (md_begin): Initialize xtensa_extui_opcode. 1189 11902007-07-24 Nick Clifton <nickc@redhat.com> 1191 1192 * config/tc-mep.h (skip_whitespace): Remove definition. 1193 11942007-07-23 H.J. Lu <hongjiu.lu@intel.com> 1195 1196 * config/tc-i386.c (cpu_arch): Change i386 to PROCESSOR_I386. 1197 (f32_15): Removed. 1198 (jump_31): New. 1199 (f32_patt): Remove f32_15. 1200 (f16_patt): Likewise. 1201 (i386_align_code): Updated to alt_long_patt for 64bit by 1202 default. 1203 1204 * config/tc-i386.h (processor_type): Add PROCESSOR_I386. 1205 12062007-07-23 Evandro Menezes <evandro.menezes@amd.com> 1207 1208 * config/tc-i386.c (i386_align_code): Enable alignment up to 1209 MAX_MEM_FOR_RS_ALIGN_CODE bytes. Remove special treatment 1210 for K8. 1211 1212 * config/tc-i386.h (MAX_MEM_FOR_RS_ALIGN_CODE): Changed to 31. 1213 12142007-07-20 Nick Clifton <nickc@redhat.com> 1215 1216 * app.c (do_scrub_chars): Provide a one character buffer to hold a 1217 pushed back newline at the end of an unterminated quoted string. 1218 12192007-07-14 Nick Clifton <nickc@redhat.com> 1220 1221 * config/tc-arm.c (create_register_alias): Return a boolean rather 1222 than an integer. 1223 Check the return value of insert_reg_alias and do not continue to 1224 create aliases once an insertion has failed. 1225 (s_unreq): Delete the all-upper-case and all-lower-case 1226 alternatives as well. 1227 12282007-07-12 Kai Tietz <kai.tietz@onevision.com> 1229 1230 * symbols.c: Print bfd_hostptr_t to file via fprintf_vma. 1231 * write.c: Likewise. 1232 12332007-07-11 Daniel Jacobowitz <dan@codesourcery.com> 1234 1235 * config/tc-mips.c (mips_dwarf2_format, mips_dwarf2_addr_size): Use 1236 HAVE_64BIT_SYMBOLS. 1237 12382007-07-04 Richard Sandiford <richard@codesourcery.com> 1239 1240 * config/tc-mips.c (mips_cpu_info_table): Add new entries for 1241 {24k,24ke,34k,74k}f{2_1,1_1,x}. Also add an entry for 74kf3_2. 1242 Deprecate *x and *fx. 1243 * doc/c-mips.texi: Document the new CPU arguments. Deprecate 1244 *x and *fx. 1245 12462007-07-04 H.J. Lu <hongjiu.lu@intel.com> 1247 1248 * config/obj-coff.h (x86_64_target_format): Renamed to ... 1249 (i386_target_format): This 1250 (TARGET_FORMAT): Use i386_target_format. 1251 1252 * config/tc-i386.c (x86_64_target_format): Removed. 1253 (i386_target_format): Handle PE formats. 1254 12552007-07-04 Nick Clifton <nickc@redhat.com> 1256 1257 * symbols.c (symbol_relc_make_value): Use bfd_sprintf_vma in order 1258 to get the right length of printed value. 1259 12602007-07-03 Nick Clifton <nickc@redhat.com> 1261 1262 * COPYING: Replace with GPLv3 text. 1263 * app.c: Update copyright notice to refer to GPLv3. 1264 * as.c, as.h, asintl.h, atof_generic.c, bignum.h, bit_fix.h, 1265 cgen.c, cond.c, debug.c, depend.c, dw2gencfi.c, dw2gencfi.h, 1266 dwarf2dbg.c, dwarf2dbg.h, ecoff.c, ecoff.h, ehopt.c, emul.h, 1267 emul_target.h, expr.c, expr.h, flonum-copy.c, flonum.h, 1268 flonum-konst.c, frags.c, frags.h, hash.c, hash.h, input-file.c, 1269 input-file.h, input-scrub.c, ibtl-lex.h, itbl-lex.l, itbl-ops.c, 1270 itbl-ops.h, itbl-parse.y, listing.c, listing.h, literal.c, 1271 macro.c, messages.c, obj.h, output-file.c, output-file.h, read.c, 1272 read.h, sb.c, sb,h, stabs.c, struc-symbol.h, subsegs.c, subsegs.h, 1273 symbols.c, symbols.h, tc.h, write.c, write.h, config/aout_gnu.h, 1274 config/config/atof-ieee.c, config/atof-vax.c, config/bfin-aux.h, 1275 config/bfin-defs.h, config/bfin-lex.l, config/bfin-parse.y, 1276 config/itbl-mips.h, config/m68k-parse.h, config/m68k-parse.y, 1277 config/obj-aout.c, config/obj-aout.h, config/obj-coff.c, 1278 config/obj-coff.h, config/obj-ecoff.c, config/obj-ecoff.h, 1279 config/obj-elf.c, config/obj-elf.h, config/obj-evax.c, 1280 config/obj-evax.h, config/obj-multi.h, config/obj-som.c, 1281 config/obj-som.h, config/tc-alpha.c, config/tc-alpha.h, 1282 config/tc-arc.c, config/tc-arc.h, config/tc-arm.c, 1283 config/tc-arm.h, config/tc-avr.c, config/tc-avr.h, 1284 config/tc-bfin.c, config/tc-bfin.h, config/tc-cr16.c, 1285 config/tc-cr16.h, config/tc-cris.c, config/tc-cris.h, 1286 config/tc-crx.c, config/tc-crx.h, config/tc-d10v.c, 1287 config/tc-d10v.h, config/tc-d30v.c, config/tc-d30v.h, 1288 config/tc-dlx.c, config/tc-dlx.h, config/tc-fr30.c, 1289 config/tc-fr30.h, config/tc-frv.c, config/tc-frv.h, 1290 config/tc-generic.c, config/tc-generic.h, config/tc-h8300.c, 1291 config/tc-h8300.h, config/tc-hppa.c, config/tc-hppa.h, 1292 config/tc-i370.c, config/tc-i370.h, config/tc-i386.c, 1293 config/tc-i386.h, config/tc-i860.c, config/tc-i860.h, 1294 config/tc-i960.c, config/tc-i960.h, config/tc-ia64.c, 1295 config/tc-ia64.h, config/tc-ip2k.c, config/tc-ip2k.h, 1296 config/tc-iq2000.c, config/tc-iq2000.h, config/tc-m32c.c, 1297 config/tc-m32c.h, config/tc-m32r.c, config/tc-m32r.h, 1298 config/tc-m68hc11.c, config/tc-m68hc11.h, config/tc-m68k.c, 1299 config/tc-m68k.h, config/tc-maxq.c, config/tc-maxq.h, 1300 config/tc-mcore.c, config/tc-mcore.h, config/tc-mep.c, 1301 config/tc-mep.h, config/tc-mips.c, config/tc-mips.h, 1302 config/tc-mmix.c, config/tc-mmix.h, config/tc-mn10200.c, 1303 config/tc-mn10200.h, config/tc-mn10300.c, config/tc-mn10300.h, 1304 config/tc-msp430.c, config/tc-msp430.h, config/tc-mt.c, 1305 config/tc-mt.h, config/tc-ns32k.c, config/tc-ms32k.h, 1306 config/tc-openrisc.c, config/tc-openrisc.h, config/tc-or32.c, 1307 config/tc-or32.h, config/tc-pdp11.c, config/tc-pdp11.h, 1308 config/tc-pj.c, config/tc-pj.h, config/tc-ppc.c, config/tc-ppc.h, 1309 config/tc-s390.c, config/tc-s390.h, config/tc-score.c, 1310 config/tc-score.h, config/tc-sh64.c, config/tc-sh64.h, 1311 config/tc-sh.c, config/tc-sh.h, config/tc-sparc.c, 1312 config/tc-sparc.h, config/tc-spu.c, config/tc-spu.h, 1313 config/tc-tic30.c, config/tc-tic30.h, config/tc-tic4x.c, 1314 config/tc-tic4x.h, config/tc-tic54x.c, config/tc-tic54x.h, 1315 config/tc-v850.c, config/tc-v850.h, config/tc-vax.c, 1316 config/tc-vax.h, config/tc-xc16x.c, config/tc-x16x.h, 1317 config/tc-xstormy16.c, config/tc-xstormy16.h, config/tc-xtensa.c, 1318 config/tc-xtensa.h, config/tc-z80.c, config/tc-z80.h, 1319 config/tc-z8k.c, config/tc-z8k.h, config/te-386bsd.h, 1320 config/te-freebsd.h, config/te-hppa.h, config/te-irix.h, 1321 config/te-netware.h, config/te-sparcaout.h, config/te-tmips.h, 1322 config/te-vxworks.h, config/vax-inst.h, config/xtensa-istack.h, 1323 config/xtensa-relax.c, config/xtensa-relax.h: Likewise. 1324 1325 * flonum-mult.c: Likewise, and also correct typo referring to 1326 non-existant GNU Assembler General Public License. 1327 * config/tc-m68851.h: Likewise. 1328 * NEWS: Mention the new license. Also note where the 2.17 release 1329 happened. 1330 * config/e-crisaout.c: Add copyright header. 1331 * config/e-criself.c, config/e-i386aout.c, config/e-i386coff.c, 1332 config/e-i386elf.c, config/e-mipscoff.c, config/e-mipself.c, 1333 config/obj-multi.c, config/te-aix5.h, config/te-armeabi.h, 1334 config/te-armlinuxeabi.h, config/te-dynix.h, config/te-epoc-pe.h, 1335 config/te-generic.h, config/te-gnu.h, config/te-go32.h, 1336 config/te-hppa64.h, config/te-hppalinux64.h, config/te-hpux.h, 1337 config/te-i386aix.h, config/te-ia64aix.h, config/te-interix.h, 1338 config/te-linux.h, config/te-lnews.h, config/te-lynx.h, 1339 config/te-mach.h, config/te-macos.h, config/te-nbsd532.h, 1340 config/te-nbsd.h, config/te-pc532mach.h, config/te-pe.h, 1341 config/te-pep.h, config/te-psos.h, config/te-riscix.h, 1342 config/te-sun3.h, config/te-svr4.h, config/te-symbian.h, 1343 config/te-wince-pe.h: Likewise. 1344 13452007-07-03 Nathan Sidwell <nathan@codesourcery.com> 1346 1347 * config/tc-m68k.c (m68k_ip): Add j & K operand types. 1348 (install_operand): Add E encoding. 1349 (md_begin): Check and skip initial '.' arg character. 1350 (get_num): Add 0..511 case. 1351 13522007-07-03 Alan Modra <amodra@bigpond.net.au> 1353 1354 PR 4713 1355 * config/obj-elf.c (elf_ecoff_set_ext): Make static when OBJ_MAYBE_ELF. 1356 * config/obj-elf.h (obj_ecoff_set_ext): Comment. 1357 13582007-07-03 Mikkel Lauritsen <renard@nospam.dk> 1359 1360 PR 4722 1361 * app.c (do_scrub_chars <state 5>): Check for output buffer full 1362 after memcpy. 1363 13642007-07-02 Joseph Myers <joseph@codesourcery.com> 1365 1366 * config/tc-mips.c (s_dtprelword, s_dtpreldword, 1367 s_dtprel_internal): New. 1368 (mips_pseudo_table): Add .dtprelword and .dtpreldword. 1369 (md_apply_fix): Handle BFD_RELOC_MIPS_TLS_DTPREL32 and 1370 BFD_RELOC_MIPS_TLS_DTPREL64. 1371 13722007-07-02 Alan Modra <amodra@bigpond.net.au> 1373 1374 * Makefile.am: Run "make dep-am". 1375 * Makefile.in: Regenerate. 1376 * aclocal.m4: Regenerate. 1377 * config.in: Regenerate. 1378 * doc/Makefile.in: Regenerate. 1379 * po/POTFILES.in: Regenerate. 1380 * po/gas.pot: Regenerate. 1381 13822007-07-02 Alan Modra <amodra@bigpond.net.au> 1383 1384 * config/tc-ppc.c (ppc_pe_section): Comment out code assigning 1385 coff section flag values to bfd section flag. 1386 13872007-06-30 H.J. Lu <hongjiu.lu@intel.com> 1388 1389 * aclocal.m4: Regenerated. 1390 * doc/Makefile.in: Likewise. 1391 * Makefile.in: Likewise. 1392 13932007-06-29 Joseph Myers <joseph@codesourcery.com> 1394 1395 * as.c (main): Only call create_obj_attrs_section if IS_ELF. 1396 13972007-06-29 Joseph Myers <joseph@codesourcery.com> 1398 1399 * as.c (create_obj_attrs_section): New. 1400 (main): Call create_obj_attrs_section for ELF. 1401 * read.c (s_gnu_attribute, skip_whitespace, skip_past_char, 1402 skip_past_comma, s_vendor_attribute): New. 1403 (potable): Add gnu_attribute for ELF. 1404 * read.h (s_vendor_attribute): Declare. 1405 * config/tc-arm.c (s_arm_eabi_attribute): Replace by wrapper 1406 round s_vendor_attribute. 1407 (aeabi_set_public_attributes): Update for new attributes 1408 interfaces. 1409 (arm_md_end): Remove attributes contents setting now done 1410 generically. 1411 14122007-06-29 M R Swami Reddy <MR.Swami.Redd@nsc.com> 1413 1414 * Makefile.am: Add CR16 related entry. 1415 * Makefile.in: Regenerate. 1416 * config/tc-cr16.h: New file 1417 * config/tc-cr16.c: New file 1418 * doc/c-cr16.texi: New file for cr16 1419 * doc/all.texi: Entry for cr16 1420 * doc/Makefile.am: Added c-cr16.texi 1421 * doc/Makefile.in: Regenerate 1422 * doc/as.texinfo: Entry for CR16 target 1423 * NEWS: Announce the support for the new target. 1424 14252007-06-26 Paul Brook <paul@codesourcery.com> 1426 1427 * config/tc-arm.c (parse_operands): Accept generic coprocessor regs 1428 for OP_RVC. 1429 (reg_names): Add fpinst, pfinst2, mvfr0 and mvfr1. 1430 14312007-06-25 H.J. Lu <hongjiu.lu@intel.com> 1432 1433 * config/tc-i386.c (process_operands): Replace regKludge 1434 with RegKludge. 1435 14362007-06-25 Richard Sandiford <richard@codesourcery.com> 1437 1438 * config/tc-mips.h (TC_SYMFIELD_TYPE): New. 1439 * config/tc-mips.c (append_insn): Record which symbols have 1440 R_MIPS16_26 relocations against them. 1441 (mips_fix_adjustable): Don't reduce relocations against such symbols. 1442 14432007-06-22 Sterling Augustine <sterling@tensilica.com> 1444 1445 * config/tc-xtensa.c (xg_assembly_relax): Comment termination rules. 1446 (frag_format_size): Handle RELAX_IMMED_STEP3. 1447 (xtensa_relax_frag, md_convert_frag): Likewise. 1448 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_IMMED_STEP3. 1449 (RELAX_IMMED_MAXSTEPS): Adjust. 1450 * config/xtensa-relax.c (widen_spec_list): Add transitions from 1451 wide branches to branch-over-jumps. 1452 (build_transition): Handle wide branches in transition patterns. 1453 14542007-06-22 H.J. Lu <hongjiu.lu@intel.com> 1455 1456 * config/tc-i386.c (disp_size): New. 1457 (imm_size): Likewise. 1458 (output_disp): Use disp_size and imm_size. 1459 (output_imm): Use imm_size. 1460 14612007-06-19 Sterling Augustine <sterling@tensilica.com> 1462 1463 * config/tc-xtensa.h (struct xtensa_frag_type): Update comment about 1464 use of literal_frag field. 1465 * config/tc-xtensa.c (xtensa_mark_literal_pool_location): Record frag 1466 in the literal_frag field. 1467 (xtensa_move_literals): Use it here instead of searching. Update 1468 literal_frag field with new value. 1469 14702007-06-14 Paul Brook <paul@codesourcery.com> 1471 1472 * config/tc-arm.c (do_t_mov_cmp): Handle shift by register and 1473 narrow shift by immediate. 1474 14752007-06-14 H.J. Lu <hongjiu.lu@intel.com> 1476 1477 * Makefile.am (ACLOCAL_AMFLAGS): Add -I ../config -I ../bfd. 1478 1479 * acinclude.m4: Don't include m4 files. 1480 (BFD_BINARY_FOPEN): Removed. 1481 Remove libtool kludge. 1482 1483 * Makefile.in: Regenerated. 1484 * doc/Makefile.in: Likewise. 1485 * aclocal.m4: Likewise. 1486 * configure: Likewise. 1487 14882007-06-11 Sterling Augustine <sterling@tensilica.com> 1489 Bob Wilson <bob.wilson@acm.org> 1490 1491 * config/tc-xtensa.c (XTENSA_PROP_INSN_NO_TRANSFORM): Renamed to... 1492 (XTENSA_PROP_NO_TRANSFORM): ...this. 1493 (frag_flags_struct): Move is_no_transform out of the insn sub-struct. 1494 (xtensa_mark_frags_for_org): New. 1495 (xtensa_handle_align): Set RELAX_ORG frag subtype for rs_org. 1496 (xtensa_post_relax_hook): Call xtensa_mark_frags_for_org. 1497 (get_frag_property_flags): Adjust reference to is_no_transform flag. 1498 (xtensa_frag_flags_combinable): Likewise. 1499 (frag_flags_to_number): Likewise. Use XTENSA_PROP_NO_TRANSFORM. 1500 * config/tc-xtensa.h (xtensa_relax_statesE): Add RELAX_ORG. 1501 15022007-06-06 Paul Brook <paul@codesourcery.com> 1503 1504 * config/tc-arm.c (s_align): Pad code sections appropriately. 1505 15062007-06-05 Paul Brook <paul@codesourcery.com> 1507 1508 * config/tc-arm.c (insns): Correct Thumb-2 ldrd/strd opcodes. 1509 15102007-06-05 Nick Clifton <nickc@redhat.com> 1511 1512 PR gas/4587 1513 * config/tc-sparc.c (sparc_ip): Terminate tls_ops array. 1514 15152007-06-05 Alan Modra <amodra@bigpond.net.au> 1516 1517 * config/tc-spu.c (spu_cons): Use deferred_expression. Handle 1518 number@ppu. 1519 (tc_gen_reloc): Abort if neither addsy or subsy is set. 1520 (md_apply_fix): Don't attempt to resolve SPU_PPU relocs. 1521 * config/tc-spu.h (md_operand): Handle @ppu without sym. 1522 15232007-05-31 Paul Brook <paul@codesourcery.com> 1524 1525 * config/tc-arm.c (insns): Allow strex on M profile cores. 1526 15272007-05-29 David S. Miller <davem@davemloft.net> 1528 Jakub Jelinek <jakub@redhat.com> 1529 1530 PR gas/4558 1531 * config/tc-sparc.c (md_apply_fix): Fix relocation overflow checks 1532 for BFD_RELOC_SPARC_WDISP16 and BFD_RELOC_SPARC_WDISP19. 1533 15342007-05-29 Alan Modra <amodra@bigpond.net.au> 1535 1536 * config/tc-spu.h: Wrap in #ifndef/#endif. Delete coff macros. 1537 15382007-05-29 Alan Modra <amodra@bigpond.net.au> 1539 1540 * config/tc-ppc.c: Convert to ISO C. 1541 * config/tc-ppc.c: Likewise. 1542 15432007-05-29 Alan Modra <amodra@bigpond.net.au> 1544 1545 * write.h (EXEC_MACHINE_TYPE): Delete. 1546 (string_byte_count, section_alignment): Delete. 1547 15482007-05-28 Nathan Sidwell <nathan@codesourcery.com> 1549 1550 * app.c (do_scrub_chars): Cope with \ at end of buffer. 1551 15522007-05-26 Alan Modra <amodra@bigpond.net.au> 1553 1554 * config/tc-ppc.c (ppc_insert_operand): Truncate sign bits in 1555 top 32 bits of 64 bit value if so doing results in passing 1556 range check. Rewrite sign extension fudges similarly. Enable 1557 fudges for powerpc64 too. Report user value if range check 1558 fails rather than fudged value. Negate PPC_OPERAND_NEGATIVE 1559 range rather than value, also to report user value on failure. 1560 15612007-03-25 Paul Brook <paul@codesourcery.com> 1562 1563 * config/tc-arm.c (T2_SUBS_PC_LR): Define. 1564 (do_t_add_sub): Correctly encode subs pc, lr, #const. 1565 (do_t_mov_cmp): Correctly encode movs pc, lr. 1566 15672007-05-24 Steve Ellcey <sje@cup.hp.com> 1568 1569 * Makefile.in: Regnerate. 1570 * configure: Regenerate. 1571 * aclocal.m4: Regenerate. 1572 * doc/Makefile.in: Regenerate. 1573 15742007-05-22 Bob Wilson <bob.wilson@acm.org> 1575 1576 * doc/c-xtensa.texi (Xtensa Automatic Alignment): Remove statements 1577 and index entries about automatic alignment of ENTRY instructions. 1578 15792007-05-22 Nick Clifton <nickc@redhat.com> 1580 1581 * doc/as.texinfo: Use @copying around the copyright notice. 1582 15832007-05-18 Joseph Myers <joseph@codesourcery.com> 1584 1585 * config/tc-mips.c (s_mipsset): Use generic s_set for directives 1586 containing a comma. 1587 15882007-05-17 H.J. Lu <hongjiu.lu@intel.com> 1589 1590 PR gas/4517 1591 2003-06-05 Michal Ludvig <mludvig@suse.cz> 1592 * doc/as.texinfo: Document new directives: .cfi_restore, 1593 .cfi_undefined, .cfi_same_value, .cfi_return_column, 1594 .cfi_remember_state and .cfi_restore_state. 1595 15962007-05-17 Nathan Sidwell <nathan@codesourcery.com> 1597 1598 * config/tc-m68k.c (md_apply_fix): Show value of out of range 1599 fixups in error message. 1600 (md_conver_frag_1): Propagate the fix source location and use 1601 as_bad_where rather than fatal, for better error messages. 1602 16032007-05-16 Paul Brook <paul@codesourcery.com> 1604 1605 * config/tc-arm.c (v7m_psrs): Add uppercase PSR names and xpsr. 1606 16072007-05-15 Mark Shinwell <shinwell@codesourcery.com> 1608 1609 * app.c (do_scrub_chars): Don't damage \@ pseudo-variables. 1610 16112007-05-15 Vincent Riviere <vincent.riviere@freesbee.fr> 1612 1613 PR gas/3041 1614 * config/tc-m68k.c (relaxable_symbol): Make sure that the correct 1615 addend is stored for relocs against weak symbols. 1616 (md_apply_fix): So not loose track of addend for relocs against 1617 weak symbols. 1618 16192007-05-14 Thiemo Seufer <ths@mips.com> 1620 1621 * config/tc-mips.c (md_parse_option): Fix parsing of -O option. 1622 16232007-05-14 Mei Ligang <ligang@sunnorth.com.cn> 1624 1625 * config/tc-score.c (data_op2, validate_immediate): Fix bug for 1626 addri, addri.c, subi, and subi.c when immediate number is hex. 1627 (score_insns): Remove subis and subis.c. 1628 (do_sub_rdi16): Delete. 1629 16302007-05-11 Alan Modra <amodra@bigpond.net.au> 1631 1632 * config/tc-spu.c (md_pseudo_table): Add int, long, quad. Call 1633 spu_cons for word. 1634 (md_assemble): Tidy use of insn.flag. 1635 (get_imm): Likewise. Handle uppercase input too. 1636 (spu_cons): New function. 1637 * config/tc-spu.h (tc_fix_adjustable): Don't adjust SPU_PPU relocs. 1638 (TC_FORCE_RELOCATION): Don't resolve them either. 1639 16402007-05-05 Mark Shinwell <shinwell@codesourcery.com> 1641 1642 * config/tc-arm.c (md_apply_fix): Generate more accurate 1643 diagnostic when 8-bit immediate range is exceeded for 1644 BFD_RELOC_ARM_OFFSET_IMM8. 1645 16462007-05-04 Alan Modra <amodra@bigpond.net.au> 1647 1648 PR gas/4460 1649 * config/tc-i386.c (lex_got): Don't replace the reloc token with 1650 a space if we already have a space. 1651 16522007-05-03 H.J. Lu <hongjiu.lu@intel.com> 1653 1654 * config/tc-i386.c (match_template): Don't explicitly check 1655 suffix for crc32 in Intel mode. 1656 (process_suffix): Issue an error for crc32 if the operand size 1657 is ambiguous. 1658 16592007-05-03 Vincent Riviere <vincent.riviere@freesbee.fr> 1660 Nick Clifton <nickc@redhat.com> 1661 1662 PR gas/3041 1663 * config/tc-m68k.c (relaxable_symbol): Do not relax weak symbols. 1664 (tc_gen_reloc): Adjust the addend of relocs against weak symbols. 1665 (md_apply_fix): Put zero values into the frags referencing weak 1666 symbols. 1667 16682007-05-02 Alan Modra <amodra@bigpond.net.au> 1669 1670 PR 4448 1671 * config/tc-ppc.c (ppc_insert_operand): Don't increase min for 1672 PPC_OPERAND_PLUS1. 1673 16742007-05-01 H.J. Lu <hongjiu.lu@intel.com> 1675 1676 * config/tc-i386.c (match_template): Check suffix for crc32 in 1677 Intel mdoe. 1678 (process_suffix): Default the suffix of 8bit crc32 to 1679 BYTE_MNEM_SUFFIX. 1680 (check_byte_reg): Skip check for 8bit crc32. 1681 16822007-04-30 H.J. Lu <hongjiu.lu@intel.com> 1683 1684 * config/tc-i386.c (md_assemble): Use register_prefix in 1685 error/warning message. 1686 (check_byte_reg): Likewise. 1687 (check_long_reg): Likewise. 1688 (check_qword_reg): Likewise. 1689 (check_word_reg): Likewise. 1690 (process_operands): Likewise. 1691 16922007-04-30 Alan Modra <amodra@bigpond.net.au> 1693 1694 PR 4436 1695 * config/tc-ppc.c (ppc_insert_operand): Disable range check if 1696 min > max. 1697 16982007-04-28 Thiemo Seufer <ths@networkno.de> 1699 1700 * config/tc-mips.c: Fix comment. 1701 17022007-04-26 Anatoly Sokolov <aesok@post.ru> 1703 1704 * config/tc-avr.c (mcu_types): Add support for atmega8hva and 1705 atmega16hva devices. Move at90usb82 device to 'avr5' architecture. 1706 * doc/c-avr.texi: Document new devices. 1707 17082007-04-24 Alan Modra <amodra@bigpond.net.au> 1709 1710 * Makefile.am: Run "make dep-am". 1711 * Makefile.in: Regenerate. 1712 17132007-04-23 Nathan Sidwell <nathan@codesourcery.com> 1714 1715 * config/tc-m68k.c (mcf54455_ctrl): New. 1716 (HAVE_LONG_DISP, HAVE_LONG_CALL, HAVE_LONG_COND): New. 1717 (m68k_archs): Add isac. 1718 (m68k_cpus): Add 54455 family. 1719 (m68k_ip): Split Bg into Bb, Bs, Bg. 1720 (m68k_elf_final_processing): Add ISA_C. 1721 * doc/c-m68k.texi (M680x0 Options): Add isac. 1722 17232007-04-22 Alan Modra <amodra@bigpond.net.au> 1724 1725 * read.c (read_a_source_file): Skip multiple spaces to 1726 cover hack in mmix md_start_line_hook which overwrites a 1727 colon with a space. Delete sermon and needless assertion. 1728 17292007-04-21 Alan Modra <amodra@bigpond.net.au> 1730 1731 * config/atof-vax.c (atof_vax_sizeof): Change return type to unsigned. 1732 (md_atof): Make number_of_chars unsigned. Revert last change. 1733 * config/tc-or32.c (md_apply_fix): Delete bogus assertions. 1734 * config/tc-sh.c (sh_optimize_expr): Only define for OBJ_ELF. 1735 * config/tc-sh.h (md_optimize_expr): Likewise. 1736 * config/tc-sh64.c (shmedia_md_pcrel_from_section): Delete bogus 1737 assertion. 1738 * config/tc-xtensa.c (convert_frag_immed_finish_loop): Likewise. 1739 17402007-04-21 Nick Clifton <nickc@redhat.com> 1741 1742 * config/atof-vax.c (md_atof): Fix comparison inside know(). 1743 1744 * config/tc-ia64.c (emit_one_bundle): Fix typo. 1745 17462007-04-21 Alan Modra <amodra@bigpond.net.au> 1747 1748 * expr.c (expr): Assert on rankarg, not rank which can be unsigned. 1749 * read.c (read_a_source_file): Remove buffer_limit[-1] assertion. 1750 Don't skip over NUL char. 1751 (pseudo_set): Set X_op for registers to O_register. 1752 * symbols.c (symbol_clone): Remove assertion that sym is defined. 1753 (resolve_symbol_value): Resolve O_register symbols. 1754 * config/tc-i386.c (parse_real_register): Don't use i386_float_regtab. 1755 Instead find st(0) by hash lookup. 1756 * config/tc-ppc.c (ppc_macro): Warning fix. 1757 1758 * as.h (ENABLE_CHECKING): Default define to 0. 1759 (know): Assert if ENABLE_CHECKING. 1760 (struct relax_type): Remove superfluous declaration. 1761 * configure.in (--enable-checking): New. 1762 * configure: Regenerate. 1763 * config.in: Regenerate. 1764 * config/tc-ppc.c (ppc_setup_opcodes): Do checks when ENABLE_CHECKING. 1765 Check for duplicate powerpc_operands entries. 1766 17672007-04-20 Nathan Sidwell <nathan@codesourcery.com> 1768 1769 * config/tc-m68k.c (mcf5253_ctrl): New. 1770 (mcf52223_ctrl): New. 1771 (m68k_cpus): Add 5253, 52221, 52223. 1772 1773 * config/m68k-parse.h (RAMBAR_ALT): New. 1774 * config/tc-m68k.c (mcf5206_ctrl, mcf5307_ctrl): New. 1775 (mcf_ctrl, mcf5208_ctrl, mcf5210a_ctrl, mcf5213_ctrl, mcf52235_ctrl, 1776 mcf5225_ctrl, mcf5235_ctrl, mcf5271_ctrl, mcf5275_ctrl, 1777 mcf5282_ctrl, mcf5329_ctrl, mcf5373_ctrl, mcfv4e_ctrl, 1778 mcf5475_ctrl, mcf5485_ctrl): Add RAMBAR synonym for 1779 RAMBAR1. 1780 (mcf5272_ctrl): Add RAMBAR0, replace add RAMBAR with RAMBAR_ALT. 1781 (m68k_cpus): Adjust 5206, 5206e & 5307 entries. 1782 (m68k_ip) <Case J>: Detect when RAMBAR_ALT should be used. Add it 1783 to control register mapping. 1784 17852007-04-20 Alan Modra <amodra@bigpond.net.au> 1786 1787 * messages.c (as_internal_value_out_of_range): Fix typo in 1788 error message. Return after printing domain error. 1789 * config/tc-ppc.c (ppc_insert_operand): Preserve low zero bits 1790 in max when shifting right. 1791 17922007-04-20 Alan Modra <amodra@bigpond.net.au> 1793 1794 * messages.c (as_internal_value_out_of_range): Extend to report 1795 errors for values with invalid low bits set. 1796 * config/tc-ppc.c (ppc_setup_opcodes): Check powerpc_operands bitm 1797 fields. Check that operands and opcode fields are disjoint. 1798 (ppc_insert_operand): Check operands using mask rather than bit 1799 count. Check low bits too. Handle PPC_OPERAND_PLUS1. Adjust 1800 insertion code. 1801 (md_apply_fix): Adjust for struct powerpc_operand change. 1802 18032007-04-19 Paul Brook <paul@codesourcery.com> 1804 1805 * config/tc-arm.c (md_assemble): Only allow 16-bit instructions on 1806 Thumb-1. Add sanity check for bogus relaxations. 1807 18082007-04-19 Paul Brook <paul@codesourcery.com> 1809 1810 * config/tc-arm.c (insns): Allow rsb and rsbs on Thumb-1. 1811 18122007-04-19 Alan Modra <amodra@bigpond.net.au> 1813 1814 * Makefile.am: Run "make dep-am". 1815 * Makefile.in: Regenerate. 1816 18172007-04-19 Nathan Froyd <froydnj@codesourcery.com> 1818 1819 * doc/c-ppc.texi (PowerPC-Opts): Document -me500, -me500x2, -mspe. 1820 18212007-04-18 H.J. Lu <hongjiu.lu@intel.com> 1822 1823 * doc/c-i386.texi; Document .ssse3, .sse4.1, .sse4.2 and .sse4. 1824 18252007-04-18 H.J. Lu <hongjiu.lu@intel.com> 1826 1827 * config/tc-i386.c (cpu_arch): Add .sse4.2 and .sse4. 1828 (match_template): Handle operand size for crc32 in SSE4.2. 1829 (process_suffix): Handle operand type for crc32 in SSE4.2. 1830 (output_insn): Support SSE4.2. 1831 18322007-04-18 H.J. Lu <hongjiu.lu@intel.com> 1833 1834 * config/tc-i386.c (cpu_arch): Add .sse4.1. 1835 (process_operands): Adjust implicit operand for blendvpd, 1836 blendvps and pblendvb in SSE4.1. 1837 (output_insn): Support SSE4.1. 1838 18392007-04-18 Paul Brook <paul@codesourcery.com> 1840 1841 * config/tc-arm.c (do_t_rsb): Use 16-bit encoding when possible. 1842 18432007-04-16 Kaz Kojima <kkojima@rr.iij4u.or.jp> 1844 1845 * config/tc-sh.c (sh_handle_align): Call as_bad_where instead 1846 of as_warn_where for misaligned data. 1847 18482007-04-15 Kaz Kojima <kkojima@rr.iij4u.or.jp> 1849 1850 * config/tc-sh.c (align_test_frag_offset_fixed_p): Handle 1851 rs_fill frags. 1852 18532007-04-14 Steve Ellcey <sje@cup.hp.com> 1854 1855 * Makefile.am: Add ACLOCAL_AMFLAGS. 1856 * Makefile.in: Regenerate. 1857 18582007-04-14 Kaz Kojima <kkojima@rr.iij4u.or.jp> 1859 1860 * config/tc-sh.c (align_test_frag_offset_fixed_p): New. 1861 (sh_optimize_expr): Likewise. 1862 * config/tc-sh.h (md_optimize_expr): Define. 1863 (sh_optimize_expr): Prototype. 1864 18652007-04-06 Matt Thomas <matt@netbsd.org> 1866 1867 * config/tc-vax.c (vax_cons): Added to support %pcrel{8,16,32}(exp) 1868 to emit pcrel relocations by DWARF2 in non-code sections. Borrowed 1869 heavily from tc-sparc.c. (vax_cons_fix_new): Likewise. 1870 18712007-04-04 Kazu Hirata <kazu@codesourcery.com> 1872 1873 * config/tc-m68k.c (HAVE_LONG_BRANCH): Add fido_a. 1874 18752007-04-04 Paul Brook <paul@codesourcery.com> 1876 1877 * config/tc-arm.c (do_neon_ext): Enforce immediate range. 1878 (insns): Use I15 for vext. 1879 18802007-04-04 Paul Brook <paul@codesourcery.com> 1881 1882 * configure.tgt: Loosen checks for arm uclinux eabi targets. 1883 18842007-04-02 Sterling Augustine <sterling@tensilica.com> 1885 1886 * config/tc-xtensa.c (xtensa_flush_pending_output): Check 1887 outputting_stabs_line_debug. 1888 18892007-03-26 Anatoly Sokolov <aesok@post.ru> 1890 1891 * config/tc-avr.c (mcu_types): Add support for at90pwm1, at90usb82, 1892 at90usb162, atmega325p, atmega329p, atmega3250p and atmega3290p 1893 devices. 1894 * doc/c-avr.texi: Document new devices. 1895 18962007-04-02 Richard Sandiford <richard@codesourcery.com> 1897 1898 * doc/as.texinfo: Add -mvxworks-pic to the list of MIPS options. 1899 * doc/c-mips.texi (-KPIC, -mvxworks-pic): Document. 1900 * config/tc-mips.c (md_show_usage): Mention -mvxworks-pic. 1901 19022007-03-30 Sterling Augustine <sterling@tensilica.com> 1903 Bob Wilson <bob.wilson@acm.org> 1904 1905 * config/tc-xtensa.c (xtensa_move_labels): Remove loops_ok argument. 1906 Do not check is_loop_target flag. 1907 (xtensa_frob_label): Adjust calls to xtensa_move_labels. 1908 (xg_assemble_vliw_tokens): Likewise. Also avoid calling 1909 xtensa_move_labels for alignment of loop opcodes. 1910 19112007-03-30 H.J. Lu <hongjiu.lu@intel.com> 1912 1913 * config/tc-i386.c (process_suffix): Reindent a bit. 1914 19152007-03-30 Paul Brook <paul@codesourcery.com> 1916 1917 * config/tc-arm.c (encode_thumb2_ldmstm): New function. 1918 (do_t_ldmstm): Generate 16-bit push/pop. Use encode_thumb2_ldmstm. 1919 (do_t_push_pop): Use encode_thumb2_ldmstm. 1920 19212007-03-29 DJ Delorie <dj@redhat.com> 1922 1923 * config/tc-m32c.c (rl_for, relaxable): Protect argument. 1924 (md_relax_table): Add entries for ADJNZ macros. 1925 (M32C_Macros): Add ADJNZ macros. 1926 (subtype_mappings): Add entries for ADJNZ macros. 1927 (insn_to_subtype): Check for adjnz and sbjnz insns. 1928 (md_estimate_size_before_relax): Pass insn to insn_to_subtype. 1929 (md_convert_frag): Convert adjnz and sbjnz. 1930 19312007-03-29 Nick Clifton <nickc@redhat.com> 1932 1933 * itbl-ops.c (itbl_entry): Remove unnecessary and excessively long 1934 initialization. 1935 * itbl-ops.h (enum e_processor): Initialise the e_nprocs field 1936 using ITBL_NUMBER_OF_PROCESSORS. 1937 * itbl-parse.y (yyerror): Remove use of redundant macro PARAMS. 1938 19392007-03-28 H.J. Lu <hongjiu.lu@intel.com> 1940 1941 * config/tc-i386.c (build_modrm_byte): For instructions with 2 1942 register operands, encode destination in i.rm.regmem if its 1943 RegMem bit is set. 1944 19452007-03-28 Richard Sandiford <richard@codesourcery.com> 1946 Phil Edwards <phil@codesourcery.com> 1947 1948 * doc/as.texinfo: Put the contents after the title page rather 1949 than at the end of the document. 1950 19512007-03-27 Alan Modra <amodra@bigpond.net.au> 1952 1953 * NEWS: Mention ".reloc". 1954 19552007-03-26 Sterling Augustine <sterling@tensilica.com> 1956 1957 * config/tc-xtensa.c (xg_translate_idioms): Allow assembly idioms 1958 in FLIX instructions. 1959 19602007-03-26 Julian Brown <julian@codesourcery.com> 1961 1962 * config/tc-arm.c (arm_it): Add immisfloat field. 1963 (parse_qfloat_immediate): Disallow integer syntax for floating-point 1964 immediates. Fix hex immediates, handle 0.0 and -0.0 specially. 1965 (parse_neon_mov): Set immisfloat bit for operand if it parsed as a 1966 float. 1967 (neon_cmode_for_move_imm): Reject non-float immediates for float 1968 operands. 1969 (neon_move_immediate): Pass immisfloat bit to neon_cmode_for_move_imm. 1970 19712007-03-26 Julian Brown <julian@codesourcery.com> 1972 1973 * doc/c-arm.texi: Add documentation for .dn/.qn directives. 1974 19752007-03-26 Alan Modra <amodra@bigpond.net.au> 1976 1977 * doc/as.texinfo (Reloc): Document. 1978 * read.c (potable): Add "reloc". 1979 (s_reloc): New function. 1980 * write.c (reloc_list): New global var. 1981 (resolve_reloc_expr_symbols): New function. 1982 (write_object_file): Call it. 1983 (write_relocs): Process reloc_list. 1984 * write.h (struct reloc_list): New. 1985 (reloc_list): Declare. 1986 19872007-03-24 Paul Brook <paul@codesourcery.com> 1988 1989 * config/tc-arm.c (do_t_ldmstm): Error on Thumb-2 addressing modes. 1990 19912007-03-24 Paul Brook <paul@codesourcery.com> 1992 Mark Shinwell <shinwell@codesourcery.com> 1993 1994 * config/tc-arm.c (operand_parse_code): Add OP_oRRw. 1995 (parse_operands): Don't expect comma if first operand missing. 1996 Handle OP_oRRw. 1997 (do_srs): Encode register number, checking it is r13. Update comment. 1998 (insns): Update SRS entries to take a register. 1999 20002007-03-23 H.J. Lu <hongjiu.lu@intel.com> 2001 2002 * config/tc-i386.c (md_begin): Allow '.' in mnemonic. 2003 20042007-03-23 Mark Shinwell <shinwell@codesourcery.com> 2005 2006 * config/tc-arm.c (md_apply_fix): Turn CBZ instructions that 2007 attempt to jump to the next instruction into NOPs. 2008 20092007-03-23 Alan Modra <amodra@bigpond.net.au> 2010 2011 * config/tc-spu.c: Don't include opcode/spu.h. 2012 (md_assemble): Set tc_fix_data.insn_tag and arg_format. 2013 (md_apply_fix): Adjust. 2014 * config/tc-spu.h: Include opcode/spu.h. 2015 (struct tc_fix_info): New. 2016 (TC_FIX_TYPE, TC_INIT_FIX_DATA): Adjust. 2017 (TC_FORCE_RELOCATION): Define. 2018 20192007-03-22 Joseph Myers <joseph@codesourcery.com> 2020 2021 * doc/as.texinfo: Include VERSION_PACKAGE when reporting version. 2022 20232007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2024 2025 * config/tc-i386.c (process_suffix): Check 0x90 instead of 2026 xchg for xchg %rax,%rax. 2027 20282007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2029 2030 * config/tc-i386.c: Replace REX_MODE64, REX_EXTX, REX_EXTY 2031 and REX_EXTZ with REX_W, REX_R, REX_X and REX_B respectively. 2032 20332007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2034 2035 PR binutils/4218 2036 * config/tc-i386.c (match_template): Properly handle 64bit mode 2037 "xchg %eax, %eax". 2038 20392007-03-21 Anton Ertl <anton@mips.complang.tuw> 2040 2041 PR gas/4124 2042 * config/tc-alpha.c (emit_ustX): Fix ustq code generation. 2043 20442007-03-21 H.J. Lu <hongjiu.lu@intel.com> 2045 2046 * Makefile.am: Run dep-am. 2047 * Makefile.in: Regenerated. 2048 2049 * config/tc-i386.c: Don't include "opcodes/i386-opc.h". 2050 2051 * config/tc-i386.h: Include "opcodes/i386-opc.h". 2052 (NOP_OPCODE): Removed. 2053 (template): Likewise. 2054 20552007-03-21 Andreas Schwab <schwab@suse.de> 2056 2057 * config/tc-i386.h (NOP_OPCODE): Restore. 2058 20592007-03-18 Mark Shinwell <shinwell@codesourcery.com> 2060 2061 * config/tc-arm.c (do_mul): Don't warn about overlapping 2062 Rd and Rm operands when assembling for v6 or above. 2063 Correctly capitalize register names in the messages. 2064 (do_mlas): Likewise. Delete spurious blank line. 2065 20662007-03-16 Kazu Hirata <kazu@codesourcery.com> 2067 2068 * config/tc-m68k.c (m68k_cpus): Add an entry for fidoa. 2069 20702007-03-15 H.J. Lu <hongjiu.lu@intel.com> 2071 2072 * config/tc-i386.c (md_begin): Use i386_regtab_size to scan 2073 i386_regtab. 2074 (parse_register): Use i386_regtab_size instead of ARRAY_SIZE 2075 on i386_regtab. 2076 20772007-03-15 Alexandre Oliva <aoliva@redhat.com> 2078 2079 PR gas/4184 2080 * app.c (do_scrub_chars): PUT after setting states. 2081 20822007-03-15 H.J. Lu <hongjiu.lu@intel.com> 2083 2084 * Makefile.am: Run "make dep-am". 2085 * Makefile.in: Regenerated. 2086 2087 * config/tc-i386.c: Include "opcodes/i386-opc.h" instead of 2088 "opcode/i386.h". 2089 (md_begin): Check reg_name != NULL for the last entry in 2090 i386_regtab. 2091 2092 * config/tc-i386.h: Move many entries to opcode/i386.h and 2093 opcodes/i386-opc.h. 2094 2095 * configure.in (need_opcodes): Set true for i386. 2096 * configure: Regenerated. 2097 20982007-03-15 H.J. Lu <hongjiu.lu@intel.com> 2099 2100 * Makefile.am (REPORT_BUGS_TO): Removed. 2101 (INCLUDES): Remove -DREPORT_BUGS_TO. 2102 * Makefile.in: Regenerated. 2103 2104 * configure.in (--with-bugurl): Removed. 2105 * configure: Regenerated. 2106 2107 * doc/Makefile.am (as_TEXINFOS): Remove gasver.texi. 2108 (AM_MAKEINFOFLAGS): Add -I ../../bfd/doc. 2109 (TEXI2DVI): Likewise. 2110 (gasver.texi): Removed. 2111 (MOSTLYCLEANFILES): Remove gasver.texi. 2112 (as.1): Don't depend on gasver.texi. 2113 * doc/Makefile.in: Regenerated. 2114 2115 * doc/as.texi: Include bfdver.texi instead of gasver.texi. 2116 21172007-03-14 Daniel Jacobowitz <dan@codesourcery.com> 2118 2119 * config/tc-arm.c (arm_copy_symbol_attributes): New. 2120 * config/tc-arm.h (arm_copy_symbol_attributes): Declare. 2121 (TC_COPY_SYMBOL_ATTRIBUTES): Define. 2122 * gas/symbols.c (copy_symbol_attributes): Use 2123 TC_COPY_SYMBOL_ATTRIBUTES. 2124 21252007-03-14 Paul Brook <paul@codesourcery.com> 2126 2127 * config/tc-arm.c (T16_32_TAB): Fix dec_sp encoding. 2128 21292007-03-14 Alan Modra <amodra@bigpond.net.au> 2130 2131 PR 4029 2132 * write.c (relax_segment): Insert extra alignment padding 2133 to break infinite relax loop when given impossible 2134 gcc_except_table assembly. 2135 21362007-03-12 H.J. Lu <hongjiu.lu@intel.com> 2137 2138 * config/tc-i386.c (md_assemble): Use Opcode_XXX instead of XXX 2139 on i.tm.base_opcode. 2140 (match_template): Likewise. 2141 (process_operands): Use ~0x3 mask to match MOV_AX_DISP32. 2142 2143 * config/tc-i386.h (Opcode_D): New. 2144 (Opcode_FloatR): Likewise. 2145 (Opcode_FloatD): Likewise. 2146 (D): Redefined. 2147 (W): Likewise. 2148 (FloatMF): Likewise. 2149 (FloatR): Likewise. 2150 (FloatD): Likewise. 2151 21522007-03-09 Alexandre Oliva <aoliva@redhat.com> 2153 2154 * app.c (do_scrub_chars): Recognize comments after # line "file". 2155 * read.c (get_linefile_number): New. 2156 (s_app_line): Accept ill-formed .linefile lines as comments. 2157 21582007-03-09 Alan Modra <amodra@bigpond.net.au> 2159 2160 * config/tc-i386.h (WORKING_DOT_WORD): Define. 2161 21622007-03-09 Alexandre Oliva <aoliva@redhat.com> 2163 2164 * app.c (do_scrub_chars): Turn #<line>"file"flags into .linefile. 2165 * as.h (new_logical_line_flags): New. 2166 * input-scrub.c (new_logical_line): Turned into wrapper for... 2167 (new_logical_line_flags): this. Handle flags. 2168 * read.c (potable): Add linefile. Adjust appline argument. 2169 (s_app_file): Fake .appfiles no more. 2170 (s_app_line): For .linefile, accept file name and flags. 2171 21722007-03-08 Alan Modra <amodra@bigpond.net.au> 2173 2174 * symbols.c (symbol_relc_make_sym): Comment typo fixes. 2175 21762007-03-08 Alan Modra <amodra@bigpond.net.au> 2177 2178 * Makefile.am: Run "make dep-am". 2179 * Makefile.in: Regenerate. 2180 * po/POTFILES.in: Regenerate. 2181 21822007-03-07 Joseph Myers <joseph@codesourcery.com> 2183 2184 * configure.in (REPORT_BUGS_TEXI): Define to Texinfo version of 2185 bug-reporting URL. 2186 * doc/Makefile.am (gasver.texi): Define BUGURL. 2187 * doc/as.texinfo: Use BUGURL. 2188 * Makefile.in, configure, doc/Makefile.in: Regenerate. 2189 21902007-03-06 Andreas Krebbel <krebbel1@de.ibm.com> 2191 2192 * config/tc-s390.c (md_parse_option): z9-ec option added. 2193 21942007-03-02 Paul Brook <paul@codesourcery.com> 2195 2196 * config/tc-arm.c (relax_immediate): Always return positive values. 2197 (relaxed_symbol_addr): New function. 2198 (relax_adr, relax_branch): Use it. 2199 (arm_relax_frag): Pass strect argument. Adjust infinite loop check. 2200 22012007-03-01 Joseph Myers <joseph@codesourcery.com> 2202 2203 * as.c (parse_args): Update copyright date. 2204 22052007-02-28 Nathan Sidwell <nathan@codesourcery.com> 2206 2207 * configure.tgt (sh-*-uclinux, sh[12]-*-uclinux): Specify as elf. 2208 22092007-02-28 Nick Clifton <nickc@redhat.com> 2210 2211 PR gas/3797 2212 * config/tc-d10v.c (do_assemble): Do not generate error messages, 2213 just return -1 whenever a problem is encountered. 2214 (md_assemble): If do_assemble returns -1 generate a non-fatal 2215 error message and return. 2216 2217 PR gas/2623 2218 * config/tc-msp430.c (line_separator_char): Change to '{'. 2219 22202007-02-27 Alan Modra <amodra@bigpond.net.au> 2221 2222 * config/tc-m68hc11.c (fixup24): Correct fixup size. 2223 (build_jump_insn): Likewise. 2224 (build_insn): Likewise. 2225 (s_m68hc11_relax): Likewise. 2226 22272007-02-27 Alan Modra <amodra@bigpond.net.au> 2228 2229 * config/obj-elf.c (elf_frob_file): frag_wane any new frags. 2230 22312007-02-25 Mark Shinwell <shinwell@codesourcery.com> 2232 2233 * config/tc-arm.c (do_vfp_nsyn_pop): Use fldmias/fldmiad. 2234 22352007-02-23 Alan Modra <amodra@bigpond.net.au> 2236 2237 * config/tc-mn10300.c (md_convert_frag): Correct fixup size. 2238 (md_assemble): Likewise. 2239 22402007-02-22 Alan Modra <amodra@bigpond.net.au> 2241 2242 * write.c (size_seg): Always clear SEC_RELOC here. 2243 (install_reloc): New function, extracted from.. 2244 (write_relocs): ..here. Combine RELOC_EXPANSION_POSSIBLE code 2245 with !RELOC_EXPANSION_POSSIBLE code. Don't add fr_offset when 2246 testing frag size. Set SEC_RELOC here. 2247 22482007-02-21 Alan Modra <amodra@bigpond.net.au> 2249 2250 PR 4082 2251 * config/tc-avr.h (TC_FX_SIZE_SLACK): Define. 2252 22532007-02-20 Thiemo Seufer <ths@mips.com> 2254 2255 * doc/c-mips.texi: Document 74kc, 74kf, 74kx. 2256 22572007-02-20 Thiemo Seufer <ths@mips.com> 2258 2259 * config/tc-mips.c (mips_cpu_info_table): Add 74K configurations. 2260 22612007-02-20 Thiemo Seufer <ths@mips.com> 2262 Chao-Ying Fu <fu@mips.com> 2263 2264 * config/tc-mips.c (mips_set_options, mips_opts, file_ase_dspr2, 2265 ISA_SUPPORTS_DSPR2_ASE, MIPS_CPU_ASE_DSPR2): Add DSP R2 ASE support. 2266 (macro_build): Add case '2'. 2267 (macro): Expand M_BALIGN to nop, packrl.ph or balign. 2268 (validate_mips_insn): Add support for balign instruction. 2269 (mips_ip): Handle DSP R2 instructions. Support balign instruction. 2270 (OPTION_DSPR2, OPTION_NO_DSPR2, OPTION_COMPAT_ARCH_BASE, 2271 md_parse_option, mips_after_parse_args): Add -mdspr2 and -mno-dspr2 2272 command line options. 2273 (s_mipsset): Add support for .set dspr2 and .set nodspr2 directives. 2274 (md_show_usage): Add -mdspr2 and -mno-dspr2 help output. 2275 * doc/c-mips.texi, doc/as.texinfo: Document -mdspr2, -mno-dspr2, 2276 .set dspr2, .set nodspr2. 2277 22782007-02-20 Nathan Sidwell <nathan@codesourcery.com> 2279 2280 * config/tc-m68k.c (mcf5210a_ctrl, mcf52235_ctrl, mcf5225_ctrl): New. 2281 (m68k_cpus): Add 5210a..5211a, 52230..52235 5224..5225. 2282 22832007-02-18 Alan Modra <amodra@bigpond.net.au> 2284 2285 * write.c (TC_FX_SIZE_SLACK): Define. 2286 (write_relocs): Reinstate check for fixup within frag. 2287 * config/tc-bfin.h (TC_FX_SIZE_SLACK): Define. 2288 * config/tc-h8300.h (TC_FX_SIZE_SLACK): Define. 2289 * config/tc-mmix.h (TC_FX_SIZE_SLACK): Define. 2290 * config/tc-sh.h (TC_FX_SIZE_SLACK): Define. 2291 * config/tc-xstormy16.h (TC_FX_SIZE_SLACK): Define. 2292 22932007-02-17 Mark Mitchell <mark@codesourcery.com> 2294 Nathan Sidwell <nathan@codesourcery.com> 2295 Vladimir Prus <vladimir@codesourcery.com 2296 Joseph Myers <joseph@codesourcery.com> 2297 2298 * configure.in (--with-bugurl): New option. 2299 * configure: Regenerate. 2300 * dep-in.sed: Remove bin-bugs.h. 2301 * Makefile.am (REPORT_BUGS_TO): Define. 2302 (INCLUDES): Define REPORT_BUGS_TO. 2303 (DEP_INCLUDES): Likewise. 2304 ($(OBJS)): No longer depend on bin-bugs.h. 2305 * Makefile.in: Regenerate. 2306 * doc/Makefile.in: Regenerate. 2307 * as.c (show_usage): Don't print empty REPORT_BUGS_TO. 2308 * as.h: Remove include of bin-bugs.h. 2309 23102007-02-17 Alan Modra <amodra@bigpond.net.au> 2311 2312 * write.c: White space fixes. 2313 (fixup_segment): Move symbol_mri_common_p adjustments.. 2314 (write_relocs): ..and symbol_equated_reloc_p adjustments.. 2315 (adjust_reloc_syms): ..to here. 2316 23172007-02-16 Alan Modra <amodra@bigpond.net.au> 2318 2319 * subsegs.c (subseg_change, subseg_get): Use xcalloc rather than 2320 xmalloc, memset. Don't bother assigning NULL to known zero mem. 2321 (subseg_set_rest): Remove unnecessary cast. 2322 * write.c: Include libbfd.h. Replace PTR with void * throughout. 2323 Remove unnecessary forward declarations and casts. 2324 (set_symtab): Delete extern bfd_alloc. 2325 (fixup_segment): Move. 2326 23272007-02-15 Nathan Sidwell <nathan@codesourcery.com> 2328 2329 * config/m68k-parse.h (m68k_register): Add ROMBAR0, ASID. 2330 * config/tc-m68k.c (mcfv4e_ctrl): Add ColdFire specific names. 2331 (mcf5475_ctrl, mcf5485_ctrl): New. 2332 (m68k_cpus): Use mcf5485_ctrl and mcf5485_ctrl for those families. 2333 (m68k_ip): Add ASID, MMUBAR, ROMBAR0 handling. 2334 (init_table): Add asid, mmubar, adjust rombar0. 2335 23362007-02-14 Alan Modra <amodra@bigpond.net.au> 2337 2338 * config/tc-i386.h (Seg2ShortForm, Seg3ShortForm): Delete. 2339 * config/tc-i386.c: Wrap overly long lines, whitespace fixes. 2340 (process_operands): Move old Seg2ShortForm and Seg3ShortForm 2341 code, and test for these insns using a combination of 2342 opcode_modifier and operand_types. 2343 23442007-02-07 Paul Brook <paul@codesourcery.com> 2345 2346 * configure.tgt: Add arm*-*-uclinux-*eabi. 2347 23482007-02-05 Dave Brolley <brolley@redhat.com> 2349 Richard Sandiford <rsandifo@redhat.com> 2350 DJ Delorie <dj@redhat.com> 2351 Stan Cox <scox@redhat.com> 2352 Jim Blandy <jimb@redhat.com> 2353 Nick Clifton <nickc@redhat.com> 2354 Jim Wilson <wilson@redhat.com> 2355 Frank Ch. Eigler <fche@redhat.com> 2356 Graydon Hoare <graydon@redhat.com> 2357 Ben Elliston <bje@redhat.com> 2358 John Healy <jhealy@redhat.com> 2359 Richard Henderson <rth@redhat.com> 2360 2361 * Makefile.am (CPU_TYPES): Add mep. 2362 (TARGET_CPU_CFILES): Add tc-mep.c. 2363 (TARGET_CPU_HFILES): Add tc-mep.h. 2364 (DEPTC_mep_elf): New variable. 2365 (DEPTC_mep_coff): Likewise. 2366 (DEPOBJ_mep_coff, DEPOBJ_mep_elf, DEP_mep_coff, DEP_mep_elf): Likewise. 2367 * configure.in: Support mep. 2368 * configure.tgt: Likewise. 2369 * config/tc-mep.c: New file. 2370 * config/obj-elf.c: New file. 2371 * config/tc-mep.c: New file. 2372 * config/tc-mep.h: New file. 2373 * testsuite/gas/mep: New testsuite with content. 2374 * Makefile.in: Regenerate. 2375 * configure: Regenerate. 2376 23772007-02-05 Dave Brolley <brolley@redhat.com> 2378 2379 * cgen.c (gas_cgen_install_complex_reloc): Removed. 2380 (complex_reloc_installation_howto): Removed. 2381 23822007-02-05 Dave Brolley <brolley@redhat.com> 2383 Graydon Hoare <graydon@redhat.com> 2384 DJ Delorie <dj@redhat.com> 2385 Catherine Moore <clm@redhat.com> 2386 Michael Chastain <chastain@redhat.com> 2387 Frank Ch. Eigler <fche@redhat.com> 2388 2389 * symbols.c (use_complex_relocs_for): New, to decide 2390 when to use complex relocs. Add signed RELC support. 2391 (resolve_symbol_value): Call use_complex_relocs_for. Unconditionally 2392 encode expression symbols as mangled complex relocation symbols (when 2393 compiled with -DOBJ_COMPLEX_RELOC). 2394 (symbol_relc_make_sym,value,expr): New traversal/conversion routines. 2395 * cgen.c (gas_cgen_md_apply_fix3): Only set signed_p if RELC. Call 2396 encode_addend with new args. Modify to get start, length from 2397 ifield whenever it is set. Also change condition on which 2398 self-describing relocs are encoded. Add hook into 2399 gas_cgen_encode_addend. 2400 (queue_fixup_recursively): Add signed RELC support. Change from masked 2401 expr to trunc flag. Restore assignment of sub-field value to 2402 temporary in fixups array. Reflect changed meaning of last arg to 2403 queue_fixup_recursively. 2404 (fixup): Add cgen_maybe_multi_ifield member. 2405 (make_right_shifted_expr): New function. 2406 (queue_fixup): Change to recursive function that fragments 2407 fixups if operand has a multi-ifield. 2408 (gas_cgen_parse_operand): Add RELC code to wrap expressions in 2409 symbols, call weak_operand_overflow_check, and fragment call 2410 queue_fixup with operand fields. 2411 (gas_cgen_finish_insn) Modify to manage ifield pointer. 2412 (weak_operand_overflow_check): New function to try to select 2413 insns correctly. 2414 (gas_cgen_encode_addend): New function for relc. 2415 (gas_cgen_install_complex_reloc): Likewise. 2416 (gas_cgen_tc_gen_reloc): Add hook into gas_cgen_install_complex_reloc. 2417 * write.h (struct fix): Add msb_field_p to fx_cgen sub-struct. Add 2418 cgen_maybe_multi_ifield field to fx_cgen substructure. 2419 * cgen.h (GAS_CGEN_MAX_FIXUPS): Bump from 3 up to 32. 2420 * symbols.h (symbol_relc_make_sym,value,expr): New prototypes. 2421 24222007-02-03 DJ Delorie <dj@delorie.com> 2423 2424 * config/tc-m32c.c (m32c_cons_fix_new): New. Added to support 3 2425 byte relocs. 2426 * config/tc-m32c.h (TC_CONS_FIX_NEW): Define. 2427 (m32c_cons_fix_new): Prototype. 2428 24292007-02-02 Bob Wilson <bob.wilson@acm.org> 2430 2431 * config/tc-xtensa.c (xg_build_to_insn): Use tinsn_init. 2432 (xg_expand_assembly_insn, istack_push_space, istack_pop): Likewise. 2433 24342007-02-02 Bob Wilson <bob.wilson@acm.org> 2435 2436 * config/tc-xtensa.c (SUFFIX_MAP, suffix_relocs): New. 2437 (xtensa_elf_suffix): Use suffix_relocs instead of local mapping table. 2438 (map_suffix_reloc_to_operator): New. 2439 (map_operator_to_reloc): New. 2440 (expression_maybe_register): Fix incorrect test of return value from 2441 xtensa_elf_suffix. Rearrange to use map_suffix_reloc_to_operator. 2442 (xg_assemble_literal, convert_frag_immed): Use map_operator_to_reloc. 2443 24442007-02-02 Bob Wilson <bob.wilson@acm.org> 2445 2446 * config/xtensa-istack.h (struct tinsn_struct): Delete fixup field. 2447 (tinsn_get_tok): Delete prototype. 2448 * config/tc-xtensa.c (tinsn_get_tok): Delete. 2449 24502007-02-02 Bob Wilson <bob.wilson@acm.org> 2451 2452 * config/xtensa-relax.h (struct build_instr): Delete id field. 2453 * config/xtensa-relax.c (widen_spec_list): Remove zeros from LITERAL 2454 and LABEL tokens. 2455 (append_literal_op, append_label_op): Remove litnum/labnum arguments; 2456 set op_data fields to zero. 2457 (parse_id_constant): Delete. 2458 (build_transition): Remove code to handle numbered literals and labels. 2459 24602007-02-02 Bob Wilson <bob.wilson@acm.org> 2461 2462 * config/xtensa-relax.c (build_transition): Remove code after as_fatal. 2463 (build_transition_table): Likewise. 2464 24652007-02-01 Bob Wilson <bob.wilson@acm.org> 2466 2467 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Delete use of 2468 fx_tcbit. 2469 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Remove. 2470 24712007-02-02 Alan Modra <amodra@bigpond.net.au> 2472 2473 * write.h (struct fix <fx_pcrel_adjust, fx_size>): Move. 2474 (struct fix <fx_plt>): Rename to tcbit2. 2475 * write.c (fix_new_internal): Adjust. 2476 (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt. 2477 * config/tc-arm.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2478 * config/tc-cris.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2479 * config/tc-i386.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2480 * config/tc-i960.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2481 * config/tc-sh.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2482 * config/tc-sh64.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2483 * config/tc-sparc.h (TC_FORCE_RELOCATION_LOCAL): Likewise. 2484 * config/tc-msp430.c (msp430_force_relocation_local): Likewise. 2485 * config/tc-ia64.c (emit_one_bundle): Don't set fx_plt. 2486 * config/tc-ia64.h (TC_FORCE_RELOCATION_LOCAL): Don't test fx_plt. 2487 Instead, compare fx_r_type. 2488 * config/tc-xtensa.c (xg_add_opcode_fix, md_apply_fix): Use 2489 fx_tcbit in place of fx_plt. 2490 * config/tc-xtensa.h (TC_FORCE_RELOCATION_LOCAL): Define. 2491 * doc/internals.texi (TC_FORCE_RELOCATION_LOCAL): Remove reference 2492 to fx_plt. 2493 24942007-01-30 Nick Clifton <nickc@redhat.com> 2495 2496 * as.c (main): Mark symbols created via the --defsym command line 2497 option as volatile so that they can be overridden later on by a 2498 .set directive. This maintains compatibility with the behaviour 2499 of earlier versions of the assembler. 2500 * doc/as.texinfo (--defsym): Document that the defined symbol's 2501 value can be overridden via a .set directive. 2502 25032007-01-28 H.J. Lu <hongjiu.lu@intel.com> 2504 2505 * config/tc-i386.c (swap_imm_operands): Renamed to ... 2506 (swap_2_operands): This. Take 2 ints. 2507 (md_assemble): Updated. 2508 (swap_operands): Call swap_2_operands to swap 2 operands. 2509 25102007-01-24 DJ Delorie <dj@redhat.com> 2511 2512 * config/tc-m32c.c (md_pseudo_table): Add .3byte. 2513 25142007-01-22 Nick Clifton <nickc@redhat.com> 2515 2516 PR gas/3871 2517 * tc-score.c: Remove unnecessary uses of _(). 2518 Make the err_msg[] a file level local array in order to save 2519 storage space. 2520 Remove unnecessary sprintf()s. 2521 25222007-01-18 Mei Ligang <ligang@sunnorth.com.cn> 2523 2524 PR gas/3871 2525 * config/tc-score.c : Using _() for const string. 2526 Do not assign inst.error with a local string pointer. 2527 (md_section_align): Pad section. 2528 25292007-01-13 H.J. Lu <hongjiu.lu@intel.com> 2530 2531 * config/tc-i386.c (build_modrm_byte): Check number of operands 2532 when procssing memory/register operand. 2533 25342007-01-12 Nick Clifton <nickc@redhat.com> 2535 2536 PR gas/3856 2537 * macro.c (expand_irp): Do not ignore spaces inside quoted 2538 strings. 2539 25402007-01-12 Alan Modra <amodra@bigpond.net.au> 2541 2542 * config/tc-spu.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. 2543 * config/tc-m32r.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. 2544 * config/tc-mn10300.h (TC_RELOC_RTSYM_LOC_FIXUP): Delete. 2545 (TC_FORCE_RELOCATION): Define. 2546 (TC_FORCE_RELOCATION_LOCAL): Define. 2547 * config/tc-mn10300.c (mn10300_fix_adjustable): Adjust. 2548 25492007-01-12 Alan Modra <amodra@bigpond.net.au> 2550 2551 * input-file.c (input_file_open): Check fgets return. 2552 25532007-01-11 Paul Brook <paul@codesourcery.com> 2554 2555 * config/tc-arm.c (do_t_add_sub): Use Rd and Rs. 2556 25572007-01-11 Nick Clifton <nickc@redhat.com> 2558 2559 PR gas/3707 2560 * config/tc-arm.c (md_begin): Cope with an NULL mcpu_fpu_opt 2561 variable. 2562 2563 * config/tc-mcore.c (md_number_to_chars): Use 2564 number_to_chars_{big|little}endian. 2565 25662007-01-08 Kazu Hirata <kazu@codesourcery.com> 2567 2568 * config/tc-m68k.c (m68k_archs, m68k_cpus): Treat Fido as an 2569 architecture by itself. 2570 (m68k_ip): Don't issue a warning for tbl instructions on fido. 2571 (m68k_elf_final_processing): Treat Fido as an architecture by 2572 itself. 2573 25742007-01-08 Kai Tietz <kai.tietz@onevision.com> 2575 2576 * configure.tgt: Renamed target x86_64-*-mingw64 to x86_64-*-mingw* 2577 25782007-01-05 H.J. Lu <hongjiu.lu@intel.com> 2579 2580 * config/tc-i386.c (set_intel_syntax): Update set_intel_syntax 2581 depending on allow_naked_reg. 2582 25832007-01-04 Paul Brook <paul@codesourcery.com> 2584 2585 * config/tc-arm.c (do_cpsi): Set mmod bit for 2 argument form. 2586 25872007-01-04 H.J. Lu <hongjiu.lu@intel.com> 2588 2589 PR gas/3830 2590 * config/tc-i386.c (register_prefix): New. 2591 (set_intel_syntax): Set set_intel_syntax to "" if register 2592 prefix isn't needed. 2593 (check_byte_reg): Use register_prefix for error message. 2594 (check_long_reg): Likewise. 2595 (check_qword_reg): Likewise. 2596 (check_word_reg): Likewise. 2597 25982007-01-04 Julian Brown <julian@codesourcery.com> 2599 2600 * config/tc-arm.c (do_neon_shl_imm): Swap rN, rM. 2601 (do_neon_qshl_imm): Likewise. 2602 (do_neon_rshl): New function. Handle rounding variants of 2603 v{q}shl-by-register. 2604 (insns): Use do_neon_rshl for vrshl, vqrshl. 2605 26062007-01-04 Paul Brook <paul@codesourcery.com> 2607 2608 * config/tc-arm.c (NEON_ENC_TAB): Fix encoding of vclt, vcle, vaclt 2609 and vacle. 2610 26112007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2612 2613 * config/tc-i386.c (swap_operands): Remove branches. 2614 26152007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2616 2617 * config/tc-i386.c: Update copyright year. 2618 * config/tc-i386.h: Likewise. 2619 26202007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2621 2622 * config/tc-i386.c (smallest_imm_type): Return unsigned int 2623 instead of int. 2624 26252007-01-03 H.J. Lu <hongjiu.lu@intel.com> 2626 2627 * config/tc-i386.c: Convert to ISO C90 formatting 2628 * config/tc-i386.h: Likewise. 2629 26302007-01-03 David Daney <ddaney@avtrex.com> 2631 2632 * config/tc-mips.c (md_show_usage): Clean up -mno-shared 2633 documentation. 2634 2635For older changes see ChangeLog-2006 2636 2637Local Variables: 2638mode: change-log 2639left-margin: 8 2640fill-column: 74 2641version-control: never 2642End: 2643