1 /* 2 * CDDL HEADER START 3 * 4 * The contents of this file are subject to the terms of the 5 * Common Development and Distribution License (the "License"). 6 * You may not use this file except in compliance with the License. 7 * 8 * You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE 9 * or http://www.opensolaris.org/os/licensing. 10 * See the License for the specific language governing permissions 11 * and limitations under the License. 12 * 13 * When distributing Covered Code, include this CDDL HEADER in each 14 * file and include the License file at usr/src/OPENSOLARIS.LICENSE. 15 * If applicable, add the following below this CDDL HEADER, with the 16 * fields enclosed by brackets "[]" replaced with your own identifying 17 * information: Portions Copyright [yyyy] [name of copyright owner] 18 * 19 * CDDL HEADER END 20 */ 21 22 /* 23 * Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved. 24 * Portions Copyright 2011 iXsystems, Inc 25 * Copyright (c) 2013, 2016 by Delphix. All rights reserved. 26 * Copyright (c) 2014 Spectra Logic Corporation, All rights reserved. 27 * Copyright (c) 2014 Integros [integros.com] 28 */ 29 30 #include <sys/zfs_context.h> 31 #include <sys/types.h> 32 #include <sys/param.h> 33 #include <sys/systm.h> 34 #include <sys/sysmacros.h> 35 #include <sys/dmu.h> 36 #include <sys/dmu_impl.h> 37 #include <sys/dmu_objset.h> 38 #include <sys/dbuf.h> 39 #include <sys/dnode.h> 40 #include <sys/zap.h> 41 #include <sys/sa.h> 42 #include <sys/sunddi.h> 43 #include <sys/sa_impl.h> 44 #include <sys/dnode.h> 45 #include <sys/errno.h> 46 #include <sys/zfs_context.h> 47 48 /* 49 * ZFS System attributes: 50 * 51 * A generic mechanism to allow for arbitrary attributes 52 * to be stored in a dnode. The data will be stored in the bonus buffer of 53 * the dnode and if necessary a special "spill" block will be used to handle 54 * overflow situations. The spill block will be sized to fit the data 55 * from 512 - 128K. When a spill block is used the BP (blkptr_t) for the 56 * spill block is stored at the end of the current bonus buffer. Any 57 * attributes that would be in the way of the blkptr_t will be relocated 58 * into the spill block. 59 * 60 * Attribute registration: 61 * 62 * Stored persistently on a per dataset basis 63 * a mapping between attribute "string" names and their actual attribute 64 * numeric values, length, and byteswap function. The names are only used 65 * during registration. All attributes are known by their unique attribute 66 * id value. If an attribute can have a variable size then the value 67 * 0 will be used to indicate this. 68 * 69 * Attribute Layout: 70 * 71 * Attribute layouts are a way to compactly store multiple attributes, but 72 * without taking the overhead associated with managing each attribute 73 * individually. Since you will typically have the same set of attributes 74 * stored in the same order a single table will be used to represent that 75 * layout. The ZPL for example will usually have only about 10 different 76 * layouts (regular files, device files, symlinks, 77 * regular files + scanstamp, files/dir with extended attributes, and then 78 * you have the possibility of all of those minus ACL, because it would 79 * be kicked out into the spill block) 80 * 81 * Layouts are simply an array of the attributes and their 82 * ordering i.e. [0, 1, 4, 5, 2] 83 * 84 * Each distinct layout is given a unique layout number and that is whats 85 * stored in the header at the beginning of the SA data buffer. 86 * 87 * A layout only covers a single dbuf (bonus or spill). If a set of 88 * attributes is split up between the bonus buffer and a spill buffer then 89 * two different layouts will be used. This allows us to byteswap the 90 * spill without looking at the bonus buffer and keeps the on disk format of 91 * the bonus and spill buffer the same. 92 * 93 * Adding a single attribute will cause the entire set of attributes to 94 * be rewritten and could result in a new layout number being constructed 95 * as part of the rewrite if no such layout exists for the new set of 96 * attribues. The new attribute will be appended to the end of the already 97 * existing attributes. 98 * 99 * Both the attribute registration and attribute layout information are 100 * stored in normal ZAP attributes. Their should be a small number of 101 * known layouts and the set of attributes is assumed to typically be quite 102 * small. 103 * 104 * The registered attributes and layout "table" information is maintained 105 * in core and a special "sa_os_t" is attached to the objset_t. 106 * 107 * A special interface is provided to allow for quickly applying 108 * a large set of attributes at once. sa_replace_all_by_template() is 109 * used to set an array of attributes. This is used by the ZPL when 110 * creating a brand new file. The template that is passed into the function 111 * specifies the attribute, size for variable length attributes, location of 112 * data and special "data locator" function if the data isn't in a contiguous 113 * location. 114 * 115 * Byteswap implications: 116 * 117 * Since the SA attributes are not entirely self describing we can't do 118 * the normal byteswap processing. The special ZAP layout attribute and 119 * attribute registration attributes define the byteswap function and the 120 * size of the attributes, unless it is variable sized. 121 * The normal ZFS byteswapping infrastructure assumes you don't need 122 * to read any objects in order to do the necessary byteswapping. Whereas 123 * SA attributes can only be properly byteswapped if the dataset is opened 124 * and the layout/attribute ZAP attributes are available. Because of this 125 * the SA attributes will be byteswapped when they are first accessed by 126 * the SA code that will read the SA data. 127 */ 128 129 typedef void (sa_iterfunc_t)(void *hdr, void *addr, sa_attr_type_t, 130 uint16_t length, int length_idx, boolean_t, void *userp); 131 132 static int sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype); 133 static void sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab); 134 static void *sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, 135 void *data); 136 static void sa_idx_tab_rele(objset_t *os, void *arg); 137 static void sa_copy_data(sa_data_locator_t *func, void *start, void *target, 138 int buflen); 139 static int sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, 140 sa_data_op_t action, sa_data_locator_t *locator, void *datastart, 141 uint16_t buflen, dmu_tx_t *tx); 142 143 arc_byteswap_func_t *sa_bswap_table[] = { 144 byteswap_uint64_array, 145 byteswap_uint32_array, 146 byteswap_uint16_array, 147 byteswap_uint8_array, 148 zfs_acl_byteswap, 149 }; 150 151 #define SA_COPY_DATA(f, s, t, l) \ 152 { \ 153 if (f == NULL) { \ 154 if (l == 8) { \ 155 *(uint64_t *)t = *(uint64_t *)s; \ 156 } else if (l == 16) { \ 157 *(uint64_t *)t = *(uint64_t *)s; \ 158 *(uint64_t *)((uintptr_t)t + 8) = \ 159 *(uint64_t *)((uintptr_t)s + 8); \ 160 } else { \ 161 bcopy(s, t, l); \ 162 } \ 163 } else \ 164 sa_copy_data(f, s, t, l); \ 165 } 166 167 /* 168 * This table is fixed and cannot be changed. Its purpose is to 169 * allow the SA code to work with both old/new ZPL file systems. 170 * It contains the list of legacy attributes. These attributes aren't 171 * stored in the "attribute" registry zap objects, since older ZPL file systems 172 * won't have the registry. Only objsets of type ZFS_TYPE_FILESYSTEM will 173 * use this static table. 174 */ 175 sa_attr_reg_t sa_legacy_attrs[] = { 176 {"ZPL_ATIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 0}, 177 {"ZPL_MTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 1}, 178 {"ZPL_CTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 2}, 179 {"ZPL_CRTIME", sizeof (uint64_t) * 2, SA_UINT64_ARRAY, 3}, 180 {"ZPL_GEN", sizeof (uint64_t), SA_UINT64_ARRAY, 4}, 181 {"ZPL_MODE", sizeof (uint64_t), SA_UINT64_ARRAY, 5}, 182 {"ZPL_SIZE", sizeof (uint64_t), SA_UINT64_ARRAY, 6}, 183 {"ZPL_PARENT", sizeof (uint64_t), SA_UINT64_ARRAY, 7}, 184 {"ZPL_LINKS", sizeof (uint64_t), SA_UINT64_ARRAY, 8}, 185 {"ZPL_XATTR", sizeof (uint64_t), SA_UINT64_ARRAY, 9}, 186 {"ZPL_RDEV", sizeof (uint64_t), SA_UINT64_ARRAY, 10}, 187 {"ZPL_FLAGS", sizeof (uint64_t), SA_UINT64_ARRAY, 11}, 188 {"ZPL_UID", sizeof (uint64_t), SA_UINT64_ARRAY, 12}, 189 {"ZPL_GID", sizeof (uint64_t), SA_UINT64_ARRAY, 13}, 190 {"ZPL_PAD", sizeof (uint64_t) * 4, SA_UINT64_ARRAY, 14}, 191 {"ZPL_ZNODE_ACL", 88, SA_UINT8_ARRAY, 15}, 192 }; 193 194 /* 195 * This is only used for objects of type DMU_OT_ZNODE 196 */ 197 sa_attr_type_t sa_legacy_zpl_layout[] = { 198 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15 199 }; 200 201 /* 202 * Special dummy layout used for buffers with no attributes. 203 */ 204 sa_attr_type_t sa_dummy_zpl_layout[] = { 0 }; 205 206 static int sa_legacy_attr_count = 16; 207 static kmem_cache_t *sa_cache = NULL; 208 209 /*ARGSUSED*/ 210 static int 211 sa_cache_constructor(void *buf, void *unused, int kmflag) 212 { 213 sa_handle_t *hdl = buf; 214 215 mutex_init(&hdl->sa_lock, NULL, MUTEX_DEFAULT, NULL); 216 return (0); 217 } 218 219 /*ARGSUSED*/ 220 static void 221 sa_cache_destructor(void *buf, void *unused) 222 { 223 sa_handle_t *hdl = buf; 224 225 mutex_destroy(&hdl->sa_lock); 226 } 227 228 void 229 sa_cache_init(void) 230 { 231 sa_cache = kmem_cache_create("sa_cache", 232 sizeof (sa_handle_t), 0, sa_cache_constructor, 233 sa_cache_destructor, NULL, NULL, NULL, 0); 234 } 235 236 void 237 sa_cache_fini(void) 238 { 239 if (sa_cache) 240 kmem_cache_destroy(sa_cache); 241 } 242 243 static int 244 layout_num_compare(const void *arg1, const void *arg2) 245 { 246 const sa_lot_t *node1 = arg1; 247 const sa_lot_t *node2 = arg2; 248 249 if (node1->lot_num > node2->lot_num) 250 return (1); 251 else if (node1->lot_num < node2->lot_num) 252 return (-1); 253 return (0); 254 } 255 256 static int 257 layout_hash_compare(const void *arg1, const void *arg2) 258 { 259 const sa_lot_t *node1 = arg1; 260 const sa_lot_t *node2 = arg2; 261 262 if (node1->lot_hash > node2->lot_hash) 263 return (1); 264 if (node1->lot_hash < node2->lot_hash) 265 return (-1); 266 if (node1->lot_instance > node2->lot_instance) 267 return (1); 268 if (node1->lot_instance < node2->lot_instance) 269 return (-1); 270 return (0); 271 } 272 273 boolean_t 274 sa_layout_equal(sa_lot_t *tbf, sa_attr_type_t *attrs, int count) 275 { 276 int i; 277 278 if (count != tbf->lot_attr_count) 279 return (1); 280 281 for (i = 0; i != count; i++) { 282 if (attrs[i] != tbf->lot_attrs[i]) 283 return (1); 284 } 285 return (0); 286 } 287 288 #define SA_ATTR_HASH(attr) (zfs_crc64_table[(-1ULL ^ attr) & 0xFF]) 289 290 static uint64_t 291 sa_layout_info_hash(sa_attr_type_t *attrs, int attr_count) 292 { 293 int i; 294 uint64_t crc = -1ULL; 295 296 for (i = 0; i != attr_count; i++) 297 crc ^= SA_ATTR_HASH(attrs[i]); 298 299 return (crc); 300 } 301 302 static int 303 sa_get_spill(sa_handle_t *hdl) 304 { 305 int rc; 306 if (hdl->sa_spill == NULL) { 307 if ((rc = dmu_spill_hold_existing(hdl->sa_bonus, NULL, 308 &hdl->sa_spill)) == 0) 309 VERIFY(0 == sa_build_index(hdl, SA_SPILL)); 310 } else { 311 rc = 0; 312 } 313 314 return (rc); 315 } 316 317 /* 318 * Main attribute lookup/update function 319 * returns 0 for success or non zero for failures 320 * 321 * Operates on bulk array, first failure will abort further processing 322 */ 323 int 324 sa_attr_op(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, 325 sa_data_op_t data_op, dmu_tx_t *tx) 326 { 327 sa_os_t *sa = hdl->sa_os->os_sa; 328 int i; 329 int error = 0; 330 sa_buf_type_t buftypes; 331 332 buftypes = 0; 333 334 ASSERT(count > 0); 335 for (i = 0; i != count; i++) { 336 ASSERT(bulk[i].sa_attr <= hdl->sa_os->os_sa->sa_num_attrs); 337 338 bulk[i].sa_addr = NULL; 339 /* First check the bonus buffer */ 340 341 if (hdl->sa_bonus_tab && TOC_ATTR_PRESENT( 342 hdl->sa_bonus_tab->sa_idx_tab[bulk[i].sa_attr])) { 343 SA_ATTR_INFO(sa, hdl->sa_bonus_tab, 344 SA_GET_HDR(hdl, SA_BONUS), 345 bulk[i].sa_attr, bulk[i], SA_BONUS, hdl); 346 if (tx && !(buftypes & SA_BONUS)) { 347 dmu_buf_will_dirty(hdl->sa_bonus, tx); 348 buftypes |= SA_BONUS; 349 } 350 } 351 if (bulk[i].sa_addr == NULL && 352 ((error = sa_get_spill(hdl)) == 0)) { 353 if (TOC_ATTR_PRESENT( 354 hdl->sa_spill_tab->sa_idx_tab[bulk[i].sa_attr])) { 355 SA_ATTR_INFO(sa, hdl->sa_spill_tab, 356 SA_GET_HDR(hdl, SA_SPILL), 357 bulk[i].sa_attr, bulk[i], SA_SPILL, hdl); 358 if (tx && !(buftypes & SA_SPILL) && 359 bulk[i].sa_size == bulk[i].sa_length) { 360 dmu_buf_will_dirty(hdl->sa_spill, tx); 361 buftypes |= SA_SPILL; 362 } 363 } 364 } 365 if (error && error != ENOENT) { 366 return ((error == ECKSUM) ? EIO : error); 367 } 368 369 switch (data_op) { 370 case SA_LOOKUP: 371 if (bulk[i].sa_addr == NULL) 372 return (SET_ERROR(ENOENT)); 373 if (bulk[i].sa_data) { 374 SA_COPY_DATA(bulk[i].sa_data_func, 375 bulk[i].sa_addr, bulk[i].sa_data, 376 bulk[i].sa_size); 377 } 378 continue; 379 380 case SA_UPDATE: 381 /* existing rewrite of attr */ 382 if (bulk[i].sa_addr && 383 bulk[i].sa_size == bulk[i].sa_length) { 384 SA_COPY_DATA(bulk[i].sa_data_func, 385 bulk[i].sa_data, bulk[i].sa_addr, 386 bulk[i].sa_length); 387 continue; 388 } else if (bulk[i].sa_addr) { /* attr size change */ 389 error = sa_modify_attrs(hdl, bulk[i].sa_attr, 390 SA_REPLACE, bulk[i].sa_data_func, 391 bulk[i].sa_data, bulk[i].sa_length, tx); 392 } else { /* adding new attribute */ 393 error = sa_modify_attrs(hdl, bulk[i].sa_attr, 394 SA_ADD, bulk[i].sa_data_func, 395 bulk[i].sa_data, bulk[i].sa_length, tx); 396 } 397 if (error) 398 return (error); 399 break; 400 } 401 } 402 return (error); 403 } 404 405 static sa_lot_t * 406 sa_add_layout_entry(objset_t *os, sa_attr_type_t *attrs, int attr_count, 407 uint64_t lot_num, uint64_t hash, boolean_t zapadd, dmu_tx_t *tx) 408 { 409 sa_os_t *sa = os->os_sa; 410 sa_lot_t *tb, *findtb; 411 int i; 412 avl_index_t loc; 413 414 ASSERT(MUTEX_HELD(&sa->sa_lock)); 415 tb = kmem_zalloc(sizeof (sa_lot_t), KM_SLEEP); 416 tb->lot_attr_count = attr_count; 417 #ifdef __NetBSD__ 418 if (attr_count != 0) 419 #endif 420 tb->lot_attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, 421 KM_SLEEP); 422 bcopy(attrs, tb->lot_attrs, sizeof (sa_attr_type_t) * attr_count); 423 tb->lot_num = lot_num; 424 tb->lot_hash = hash; 425 tb->lot_instance = 0; 426 427 if (zapadd) { 428 char attr_name[8]; 429 430 if (sa->sa_layout_attr_obj == 0) { 431 sa->sa_layout_attr_obj = zap_create_link(os, 432 DMU_OT_SA_ATTR_LAYOUTS, 433 sa->sa_master_obj, SA_LAYOUTS, tx); 434 } 435 436 (void) snprintf(attr_name, sizeof (attr_name), 437 "%d", (int)lot_num); 438 VERIFY(0 == zap_update(os, os->os_sa->sa_layout_attr_obj, 439 attr_name, 2, attr_count, attrs, tx)); 440 } 441 442 list_create(&tb->lot_idx_tab, sizeof (sa_idx_tab_t), 443 offsetof(sa_idx_tab_t, sa_next)); 444 445 for (i = 0; i != attr_count; i++) { 446 if (sa->sa_attr_table[tb->lot_attrs[i]].sa_length == 0) 447 tb->lot_var_sizes++; 448 } 449 450 avl_add(&sa->sa_layout_num_tree, tb); 451 452 /* verify we don't have a hash collision */ 453 if ((findtb = avl_find(&sa->sa_layout_hash_tree, tb, &loc)) != NULL) { 454 for (; findtb && findtb->lot_hash == hash; 455 findtb = AVL_NEXT(&sa->sa_layout_hash_tree, findtb)) { 456 if (findtb->lot_instance != tb->lot_instance) 457 break; 458 tb->lot_instance++; 459 } 460 } 461 avl_add(&sa->sa_layout_hash_tree, tb); 462 return (tb); 463 } 464 465 static void 466 sa_find_layout(objset_t *os, uint64_t hash, sa_attr_type_t *attrs, 467 int count, dmu_tx_t *tx, sa_lot_t **lot) 468 { 469 sa_lot_t *tb, tbsearch; 470 avl_index_t loc; 471 sa_os_t *sa = os->os_sa; 472 boolean_t found = B_FALSE; 473 474 mutex_enter(&sa->sa_lock); 475 tbsearch.lot_hash = hash; 476 tbsearch.lot_instance = 0; 477 tb = avl_find(&sa->sa_layout_hash_tree, &tbsearch, &loc); 478 if (tb) { 479 for (; tb && tb->lot_hash == hash; 480 tb = AVL_NEXT(&sa->sa_layout_hash_tree, tb)) { 481 if (sa_layout_equal(tb, attrs, count) == 0) { 482 found = B_TRUE; 483 break; 484 } 485 } 486 } 487 if (!found) { 488 tb = sa_add_layout_entry(os, attrs, count, 489 avl_numnodes(&sa->sa_layout_num_tree), hash, B_TRUE, tx); 490 } 491 mutex_exit(&sa->sa_lock); 492 *lot = tb; 493 } 494 495 static int 496 sa_resize_spill(sa_handle_t *hdl, uint32_t size, dmu_tx_t *tx) 497 { 498 int error; 499 uint32_t blocksize; 500 501 if (size == 0) { 502 blocksize = SPA_MINBLOCKSIZE; 503 } else if (size > SPA_OLD_MAXBLOCKSIZE) { 504 ASSERT(0); 505 return (SET_ERROR(EFBIG)); 506 } else { 507 blocksize = P2ROUNDUP_TYPED(size, SPA_MINBLOCKSIZE, uint32_t); 508 } 509 510 error = dbuf_spill_set_blksz(hdl->sa_spill, blocksize, tx); 511 ASSERT(error == 0); 512 return (error); 513 } 514 515 static void 516 sa_copy_data(sa_data_locator_t *func, void *datastart, void *target, int buflen) 517 { 518 if (func == NULL) { 519 bcopy(datastart, target, buflen); 520 } else { 521 boolean_t start; 522 int bytes; 523 void *dataptr; 524 void *saptr = target; 525 uint32_t length; 526 527 start = B_TRUE; 528 bytes = 0; 529 while (bytes < buflen) { 530 func(&dataptr, &length, buflen, start, datastart); 531 bcopy(dataptr, saptr, length); 532 saptr = (void *)((caddr_t)saptr + length); 533 bytes += length; 534 start = B_FALSE; 535 } 536 } 537 } 538 539 /* 540 * Determine several different sizes 541 * first the sa header size 542 * the number of bytes to be stored 543 * if spill would occur the index in the attribute array is returned 544 * 545 * the boolean will_spill will be set when spilling is necessary. It 546 * is only set when the buftype is SA_BONUS 547 */ 548 static int 549 sa_find_sizes(sa_os_t *sa, sa_bulk_attr_t *attr_desc, int attr_count, 550 dmu_buf_t *db, sa_buf_type_t buftype, int *index, int *total, 551 boolean_t *will_spill) 552 { 553 int var_size = 0; 554 int i; 555 int full_space; 556 int hdrsize; 557 int extra_hdrsize; 558 559 if (buftype == SA_BONUS && sa->sa_force_spill) { 560 *total = 0; 561 *index = 0; 562 *will_spill = B_TRUE; 563 return (0); 564 } 565 566 *index = -1; 567 *total = 0; 568 *will_spill = B_FALSE; 569 570 extra_hdrsize = 0; 571 hdrsize = (SA_BONUSTYPE_FROM_DB(db) == DMU_OT_ZNODE) ? 0 : 572 sizeof (sa_hdr_phys_t); 573 574 full_space = (buftype == SA_BONUS) ? DN_MAX_BONUSLEN : db->db_size; 575 ASSERT(IS_P2ALIGNED(full_space, 8)); 576 577 for (i = 0; i != attr_count; i++) { 578 boolean_t is_var_sz; 579 580 *total = P2ROUNDUP(*total, 8); 581 *total += attr_desc[i].sa_length; 582 if (*will_spill) 583 continue; 584 585 is_var_sz = (SA_REGISTERED_LEN(sa, attr_desc[i].sa_attr) == 0); 586 if (is_var_sz) { 587 var_size++; 588 } 589 590 if (is_var_sz && var_size > 1) { 591 /* 592 * Don't worry that the spill block might overflow. 593 * It will be resized if needed in sa_build_layouts(). 594 */ 595 if (buftype == SA_SPILL || 596 P2ROUNDUP(hdrsize + sizeof (uint16_t), 8) + 597 *total < full_space) { 598 /* 599 * Account for header space used by array of 600 * optional sizes of variable-length attributes. 601 * Record the extra header size in case this 602 * increase needs to be reversed due to 603 * spill-over. 604 */ 605 hdrsize += sizeof (uint16_t); 606 if (*index != -1) 607 extra_hdrsize += sizeof (uint16_t); 608 } else { 609 ASSERT(buftype == SA_BONUS); 610 if (*index == -1) 611 *index = i; 612 *will_spill = B_TRUE; 613 continue; 614 } 615 } 616 617 /* 618 * find index of where spill *could* occur. 619 * Then continue to count of remainder attribute 620 * space. The sum is used later for sizing bonus 621 * and spill buffer. 622 */ 623 if (buftype == SA_BONUS && *index == -1 && 624 (*total + P2ROUNDUP(hdrsize, 8)) > 625 (full_space - sizeof (blkptr_t))) { 626 *index = i; 627 } 628 629 if ((*total + P2ROUNDUP(hdrsize, 8)) > full_space && 630 buftype == SA_BONUS) 631 *will_spill = B_TRUE; 632 } 633 634 if (*will_spill) 635 hdrsize -= extra_hdrsize; 636 637 hdrsize = P2ROUNDUP(hdrsize, 8); 638 return (hdrsize); 639 } 640 641 #define BUF_SPACE_NEEDED(total, header) (total + header) 642 643 /* 644 * Find layout that corresponds to ordering of attributes 645 * If not found a new layout number is created and added to 646 * persistent layout tables. 647 */ 648 static int 649 sa_build_layouts(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, int attr_count, 650 dmu_tx_t *tx) 651 { 652 sa_os_t *sa = hdl->sa_os->os_sa; 653 uint64_t hash; 654 sa_buf_type_t buftype; 655 sa_hdr_phys_t *sahdr; 656 void *data_start; 657 int buf_space; 658 sa_attr_type_t *attrs, *attrs_start; 659 int i, lot_count; 660 int hdrsize; 661 int spillhdrsize = 0; 662 int used; 663 dmu_object_type_t bonustype; 664 sa_lot_t *lot; 665 int len_idx; 666 int spill_used; 667 boolean_t spilling; 668 669 dmu_buf_will_dirty(hdl->sa_bonus, tx); 670 bonustype = SA_BONUSTYPE_FROM_DB(hdl->sa_bonus); 671 672 /* first determine bonus header size and sum of all attributes */ 673 hdrsize = sa_find_sizes(sa, attr_desc, attr_count, hdl->sa_bonus, 674 SA_BONUS, &i, &used, &spilling); 675 676 if (used > SPA_OLD_MAXBLOCKSIZE) 677 return (SET_ERROR(EFBIG)); 678 679 VERIFY(0 == dmu_set_bonus(hdl->sa_bonus, spilling ? 680 MIN(DN_MAX_BONUSLEN - sizeof (blkptr_t), used + hdrsize) : 681 used + hdrsize, tx)); 682 683 ASSERT((bonustype == DMU_OT_ZNODE && spilling == 0) || 684 bonustype == DMU_OT_SA); 685 686 /* setup and size spill buffer when needed */ 687 if (spilling) { 688 boolean_t dummy; 689 690 if (hdl->sa_spill == NULL) { 691 VERIFY(dmu_spill_hold_by_bonus(hdl->sa_bonus, NULL, 692 &hdl->sa_spill) == 0); 693 } 694 dmu_buf_will_dirty(hdl->sa_spill, tx); 695 696 spillhdrsize = sa_find_sizes(sa, &attr_desc[i], 697 attr_count - i, hdl->sa_spill, SA_SPILL, &i, 698 &spill_used, &dummy); 699 700 if (spill_used > SPA_OLD_MAXBLOCKSIZE) 701 return (SET_ERROR(EFBIG)); 702 703 buf_space = hdl->sa_spill->db_size - spillhdrsize; 704 if (BUF_SPACE_NEEDED(spill_used, spillhdrsize) > 705 hdl->sa_spill->db_size) 706 VERIFY(0 == sa_resize_spill(hdl, 707 BUF_SPACE_NEEDED(spill_used, spillhdrsize), tx)); 708 } 709 710 /* setup starting pointers to lay down data */ 711 data_start = (void *)((uintptr_t)hdl->sa_bonus->db_data + hdrsize); 712 sahdr = (sa_hdr_phys_t *)hdl->sa_bonus->db_data; 713 buftype = SA_BONUS; 714 715 if (spilling) 716 buf_space = (sa->sa_force_spill) ? 717 0 : SA_BLKPTR_SPACE - hdrsize; 718 else 719 buf_space = hdl->sa_bonus->db_size - hdrsize; 720 721 attrs_start = attrs = kmem_alloc(sizeof (sa_attr_type_t) * attr_count, 722 KM_SLEEP); 723 lot_count = 0; 724 725 for (i = 0, len_idx = 0, hash = -1ULL; i != attr_count; i++) { 726 uint16_t length; 727 728 ASSERT(IS_P2ALIGNED(data_start, 8)); 729 ASSERT(IS_P2ALIGNED(buf_space, 8)); 730 attrs[i] = attr_desc[i].sa_attr; 731 length = SA_REGISTERED_LEN(sa, attrs[i]); 732 if (length == 0) 733 length = attr_desc[i].sa_length; 734 else 735 VERIFY(length == attr_desc[i].sa_length); 736 737 if (buf_space < length) { /* switch to spill buffer */ 738 VERIFY(spilling); 739 VERIFY(bonustype == DMU_OT_SA); 740 if (buftype == SA_BONUS && !sa->sa_force_spill) { 741 sa_find_layout(hdl->sa_os, hash, attrs_start, 742 lot_count, tx, &lot); 743 SA_SET_HDR(sahdr, lot->lot_num, hdrsize); 744 } 745 746 buftype = SA_SPILL; 747 hash = -1ULL; 748 len_idx = 0; 749 750 sahdr = (sa_hdr_phys_t *)hdl->sa_spill->db_data; 751 sahdr->sa_magic = SA_MAGIC; 752 data_start = (void *)((uintptr_t)sahdr + 753 spillhdrsize); 754 attrs_start = &attrs[i]; 755 buf_space = hdl->sa_spill->db_size - spillhdrsize; 756 lot_count = 0; 757 } 758 hash ^= SA_ATTR_HASH(attrs[i]); 759 attr_desc[i].sa_addr = data_start; 760 attr_desc[i].sa_size = length; 761 SA_COPY_DATA(attr_desc[i].sa_data_func, attr_desc[i].sa_data, 762 data_start, length); 763 if (sa->sa_attr_table[attrs[i]].sa_length == 0) { 764 sahdr->sa_lengths[len_idx++] = length; 765 } 766 VERIFY((uintptr_t)data_start % 8 == 0); 767 data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + 768 length), 8); 769 buf_space -= P2ROUNDUP(length, 8); 770 lot_count++; 771 } 772 773 sa_find_layout(hdl->sa_os, hash, attrs_start, lot_count, tx, &lot); 774 775 /* 776 * Verify that old znodes always have layout number 0. 777 * Must be DMU_OT_SA for arbitrary layouts 778 */ 779 VERIFY((bonustype == DMU_OT_ZNODE && lot->lot_num == 0) || 780 (bonustype == DMU_OT_SA && lot->lot_num > 1)); 781 782 if (bonustype == DMU_OT_SA) { 783 SA_SET_HDR(sahdr, lot->lot_num, 784 buftype == SA_BONUS ? hdrsize : spillhdrsize); 785 } 786 787 kmem_free(attrs, sizeof (sa_attr_type_t) * attr_count); 788 if (hdl->sa_bonus_tab) { 789 sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); 790 hdl->sa_bonus_tab = NULL; 791 } 792 if (!sa->sa_force_spill) 793 VERIFY(0 == sa_build_index(hdl, SA_BONUS)); 794 if (hdl->sa_spill) { 795 sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); 796 if (!spilling) { 797 /* 798 * remove spill block that is no longer needed. 799 */ 800 dmu_buf_rele(hdl->sa_spill, NULL); 801 hdl->sa_spill = NULL; 802 hdl->sa_spill_tab = NULL; 803 VERIFY(0 == dmu_rm_spill(hdl->sa_os, 804 sa_handle_object(hdl), tx)); 805 } else { 806 VERIFY(0 == sa_build_index(hdl, SA_SPILL)); 807 } 808 } 809 810 return (0); 811 } 812 813 static void 814 sa_free_attr_table(sa_os_t *sa) 815 { 816 int i; 817 818 if (sa->sa_attr_table == NULL) 819 return; 820 821 for (i = 0; i != sa->sa_num_attrs; i++) { 822 if (sa->sa_attr_table[i].sa_name) 823 kmem_free(sa->sa_attr_table[i].sa_name, 824 strlen(sa->sa_attr_table[i].sa_name) + 1); 825 } 826 827 kmem_free(sa->sa_attr_table, 828 sizeof (sa_attr_table_t) * sa->sa_num_attrs); 829 830 sa->sa_attr_table = NULL; 831 } 832 833 static int 834 sa_attr_table_setup(objset_t *os, sa_attr_reg_t *reg_attrs, int count) 835 { 836 sa_os_t *sa = os->os_sa; 837 uint64_t sa_attr_count = 0; 838 uint64_t sa_reg_count = 0; 839 int error = 0; 840 uint64_t attr_value; 841 sa_attr_table_t *tb; 842 zap_cursor_t zc; 843 zap_attribute_t za; 844 int registered_count = 0; 845 int i; 846 dmu_objset_type_t ostype = dmu_objset_type(os); 847 848 sa->sa_user_table = 849 kmem_zalloc(count * sizeof (sa_attr_type_t), KM_SLEEP); 850 sa->sa_user_table_sz = count * sizeof (sa_attr_type_t); 851 852 if (sa->sa_reg_attr_obj != 0) { 853 error = zap_count(os, sa->sa_reg_attr_obj, 854 &sa_attr_count); 855 856 /* 857 * Make sure we retrieved a count and that it isn't zero 858 */ 859 if (error || (error == 0 && sa_attr_count == 0)) { 860 if (error == 0) 861 error = SET_ERROR(EINVAL); 862 goto bail; 863 } 864 sa_reg_count = sa_attr_count; 865 } 866 867 if (ostype == DMU_OST_ZFS && sa_attr_count == 0) 868 sa_attr_count += sa_legacy_attr_count; 869 870 /* Allocate attribute numbers for attributes that aren't registered */ 871 for (i = 0; i != count; i++) { 872 boolean_t found = B_FALSE; 873 int j; 874 875 if (ostype == DMU_OST_ZFS) { 876 for (j = 0; j != sa_legacy_attr_count; j++) { 877 if (strcmp(reg_attrs[i].sa_name, 878 sa_legacy_attrs[j].sa_name) == 0) { 879 sa->sa_user_table[i] = 880 sa_legacy_attrs[j].sa_attr; 881 found = B_TRUE; 882 } 883 } 884 } 885 if (found) 886 continue; 887 888 if (sa->sa_reg_attr_obj) 889 error = zap_lookup(os, sa->sa_reg_attr_obj, 890 reg_attrs[i].sa_name, 8, 1, &attr_value); 891 else 892 error = SET_ERROR(ENOENT); 893 switch (error) { 894 case ENOENT: 895 sa->sa_user_table[i] = (sa_attr_type_t)sa_attr_count; 896 sa_attr_count++; 897 break; 898 case 0: 899 sa->sa_user_table[i] = ATTR_NUM(attr_value); 900 break; 901 default: 902 goto bail; 903 } 904 } 905 906 sa->sa_num_attrs = sa_attr_count; 907 tb = sa->sa_attr_table = 908 kmem_zalloc(sizeof (sa_attr_table_t) * sa_attr_count, KM_SLEEP); 909 910 /* 911 * Attribute table is constructed from requested attribute list, 912 * previously foreign registered attributes, and also the legacy 913 * ZPL set of attributes. 914 */ 915 916 if (sa->sa_reg_attr_obj) { 917 for (zap_cursor_init(&zc, os, sa->sa_reg_attr_obj); 918 (error = zap_cursor_retrieve(&zc, &za)) == 0; 919 zap_cursor_advance(&zc)) { 920 uint64_t value; 921 value = za.za_first_integer; 922 923 registered_count++; 924 tb[ATTR_NUM(value)].sa_attr = ATTR_NUM(value); 925 tb[ATTR_NUM(value)].sa_length = ATTR_LENGTH(value); 926 tb[ATTR_NUM(value)].sa_byteswap = ATTR_BSWAP(value); 927 tb[ATTR_NUM(value)].sa_registered = B_TRUE; 928 929 if (tb[ATTR_NUM(value)].sa_name) { 930 continue; 931 } 932 tb[ATTR_NUM(value)].sa_name = 933 kmem_zalloc(strlen(za.za_name) +1, KM_SLEEP); 934 (void) strlcpy(tb[ATTR_NUM(value)].sa_name, za.za_name, 935 strlen(za.za_name) +1); 936 } 937 zap_cursor_fini(&zc); 938 /* 939 * Make sure we processed the correct number of registered 940 * attributes 941 */ 942 if (registered_count != sa_reg_count) { 943 ASSERT(error != 0); 944 goto bail; 945 } 946 947 } 948 949 if (ostype == DMU_OST_ZFS) { 950 for (i = 0; i != sa_legacy_attr_count; i++) { 951 if (tb[i].sa_name) 952 continue; 953 tb[i].sa_attr = sa_legacy_attrs[i].sa_attr; 954 tb[i].sa_length = sa_legacy_attrs[i].sa_length; 955 tb[i].sa_byteswap = sa_legacy_attrs[i].sa_byteswap; 956 tb[i].sa_registered = B_FALSE; 957 tb[i].sa_name = 958 kmem_zalloc(strlen(sa_legacy_attrs[i].sa_name) +1, 959 KM_SLEEP); 960 (void) strlcpy(tb[i].sa_name, 961 sa_legacy_attrs[i].sa_name, 962 strlen(sa_legacy_attrs[i].sa_name) + 1); 963 } 964 } 965 966 for (i = 0; i != count; i++) { 967 sa_attr_type_t attr_id; 968 969 attr_id = sa->sa_user_table[i]; 970 if (tb[attr_id].sa_name) 971 continue; 972 973 tb[attr_id].sa_length = reg_attrs[i].sa_length; 974 tb[attr_id].sa_byteswap = reg_attrs[i].sa_byteswap; 975 tb[attr_id].sa_attr = attr_id; 976 tb[attr_id].sa_name = 977 kmem_zalloc(strlen(reg_attrs[i].sa_name) + 1, KM_SLEEP); 978 (void) strlcpy(tb[attr_id].sa_name, reg_attrs[i].sa_name, 979 strlen(reg_attrs[i].sa_name) + 1); 980 } 981 982 sa->sa_need_attr_registration = 983 (sa_attr_count != registered_count); 984 985 return (0); 986 bail: 987 kmem_free(sa->sa_user_table, count * sizeof (sa_attr_type_t)); 988 sa->sa_user_table = NULL; 989 sa_free_attr_table(sa); 990 return ((error != 0) ? error : EINVAL); 991 } 992 993 int 994 sa_setup(objset_t *os, uint64_t sa_obj, sa_attr_reg_t *reg_attrs, int count, 995 sa_attr_type_t **user_table) 996 { 997 zap_cursor_t zc; 998 zap_attribute_t za; 999 sa_os_t *sa; 1000 dmu_objset_type_t ostype = dmu_objset_type(os); 1001 sa_attr_type_t *tb; 1002 int error; 1003 1004 mutex_enter(&os->os_user_ptr_lock); 1005 if (os->os_sa) { 1006 mutex_enter(&os->os_sa->sa_lock); 1007 mutex_exit(&os->os_user_ptr_lock); 1008 tb = os->os_sa->sa_user_table; 1009 mutex_exit(&os->os_sa->sa_lock); 1010 *user_table = tb; 1011 return (0); 1012 } 1013 1014 sa = kmem_zalloc(sizeof (sa_os_t), KM_SLEEP); 1015 mutex_init(&sa->sa_lock, NULL, MUTEX_DEFAULT, NULL); 1016 sa->sa_master_obj = sa_obj; 1017 1018 os->os_sa = sa; 1019 mutex_enter(&sa->sa_lock); 1020 mutex_exit(&os->os_user_ptr_lock); 1021 avl_create(&sa->sa_layout_num_tree, layout_num_compare, 1022 sizeof (sa_lot_t), offsetof(sa_lot_t, lot_num_node)); 1023 avl_create(&sa->sa_layout_hash_tree, layout_hash_compare, 1024 sizeof (sa_lot_t), offsetof(sa_lot_t, lot_hash_node)); 1025 1026 if (sa_obj) { 1027 error = zap_lookup(os, sa_obj, SA_LAYOUTS, 1028 8, 1, &sa->sa_layout_attr_obj); 1029 if (error != 0 && error != ENOENT) 1030 goto fail; 1031 error = zap_lookup(os, sa_obj, SA_REGISTRY, 1032 8, 1, &sa->sa_reg_attr_obj); 1033 if (error != 0 && error != ENOENT) 1034 goto fail; 1035 } 1036 1037 if ((error = sa_attr_table_setup(os, reg_attrs, count)) != 0) 1038 goto fail; 1039 1040 if (sa->sa_layout_attr_obj != 0) { 1041 uint64_t layout_count; 1042 1043 error = zap_count(os, sa->sa_layout_attr_obj, 1044 &layout_count); 1045 1046 /* 1047 * Layout number count should be > 0 1048 */ 1049 if (error || (error == 0 && layout_count == 0)) { 1050 if (error == 0) 1051 error = SET_ERROR(EINVAL); 1052 goto fail; 1053 } 1054 1055 for (zap_cursor_init(&zc, os, sa->sa_layout_attr_obj); 1056 (error = zap_cursor_retrieve(&zc, &za)) == 0; 1057 zap_cursor_advance(&zc)) { 1058 sa_attr_type_t *lot_attrs; 1059 uint64_t lot_num; 1060 1061 lot_attrs = kmem_zalloc(sizeof (sa_attr_type_t) * 1062 za.za_num_integers, KM_SLEEP); 1063 1064 if ((error = (zap_lookup(os, sa->sa_layout_attr_obj, 1065 za.za_name, 2, za.za_num_integers, 1066 lot_attrs))) != 0) { 1067 kmem_free(lot_attrs, sizeof (sa_attr_type_t) * 1068 za.za_num_integers); 1069 break; 1070 } 1071 VERIFY(ddi_strtoull(za.za_name, NULL, 10, 1072 (unsigned long long *)&lot_num) == 0); 1073 1074 (void) sa_add_layout_entry(os, lot_attrs, 1075 za.za_num_integers, lot_num, 1076 sa_layout_info_hash(lot_attrs, 1077 za.za_num_integers), B_FALSE, NULL); 1078 kmem_free(lot_attrs, sizeof (sa_attr_type_t) * 1079 za.za_num_integers); 1080 } 1081 zap_cursor_fini(&zc); 1082 1083 /* 1084 * Make sure layout count matches number of entries added 1085 * to AVL tree 1086 */ 1087 if (avl_numnodes(&sa->sa_layout_num_tree) != layout_count) { 1088 ASSERT(error != 0); 1089 goto fail; 1090 } 1091 } 1092 1093 /* Add special layout number for old ZNODES */ 1094 if (ostype == DMU_OST_ZFS) { 1095 (void) sa_add_layout_entry(os, sa_legacy_zpl_layout, 1096 sa_legacy_attr_count, 0, 1097 sa_layout_info_hash(sa_legacy_zpl_layout, 1098 sa_legacy_attr_count), B_FALSE, NULL); 1099 1100 (void) sa_add_layout_entry(os, sa_dummy_zpl_layout, 0, 1, 1101 0, B_FALSE, NULL); 1102 } 1103 *user_table = os->os_sa->sa_user_table; 1104 mutex_exit(&sa->sa_lock); 1105 return (0); 1106 fail: 1107 os->os_sa = NULL; 1108 sa_free_attr_table(sa); 1109 if (sa->sa_user_table) 1110 kmem_free(sa->sa_user_table, sa->sa_user_table_sz); 1111 mutex_exit(&sa->sa_lock); 1112 avl_destroy(&sa->sa_layout_hash_tree); 1113 avl_destroy(&sa->sa_layout_num_tree); 1114 mutex_destroy(&sa->sa_lock); 1115 kmem_free(sa, sizeof (sa_os_t)); 1116 return ((error == ECKSUM) ? EIO : error); 1117 } 1118 1119 void 1120 sa_tear_down(objset_t *os) 1121 { 1122 sa_os_t *sa = os->os_sa; 1123 sa_lot_t *layout; 1124 void *cookie; 1125 1126 kmem_free(sa->sa_user_table, sa->sa_user_table_sz); 1127 1128 /* Free up attr table */ 1129 1130 sa_free_attr_table(sa); 1131 1132 cookie = NULL; 1133 while (layout = avl_destroy_nodes(&sa->sa_layout_hash_tree, &cookie)) { 1134 sa_idx_tab_t *tab; 1135 while (tab = list_head(&layout->lot_idx_tab)) { 1136 ASSERT(refcount_count(&tab->sa_refcount)); 1137 sa_idx_tab_rele(os, tab); 1138 } 1139 } 1140 1141 cookie = NULL; 1142 while (layout = avl_destroy_nodes(&sa->sa_layout_num_tree, &cookie)) { 1143 #ifdef __NetBSD__ 1144 if (layout->lot_attr_count != 0) 1145 #endif 1146 kmem_free(layout->lot_attrs, 1147 sizeof (sa_attr_type_t) * layout->lot_attr_count); 1148 kmem_free(layout, sizeof (sa_lot_t)); 1149 } 1150 1151 avl_destroy(&sa->sa_layout_hash_tree); 1152 avl_destroy(&sa->sa_layout_num_tree); 1153 mutex_destroy(&sa->sa_lock); 1154 1155 kmem_free(sa, sizeof (sa_os_t)); 1156 os->os_sa = NULL; 1157 } 1158 1159 void 1160 sa_build_idx_tab(void *hdr, void *attr_addr, sa_attr_type_t attr, 1161 uint16_t length, int length_idx, boolean_t var_length, void *userp) 1162 { 1163 sa_idx_tab_t *idx_tab = userp; 1164 1165 if (var_length) { 1166 ASSERT(idx_tab->sa_variable_lengths); 1167 idx_tab->sa_variable_lengths[length_idx] = length; 1168 } 1169 TOC_ATTR_ENCODE(idx_tab->sa_idx_tab[attr], length_idx, 1170 (uint32_t)((uintptr_t)attr_addr - (uintptr_t)hdr)); 1171 } 1172 1173 static void 1174 sa_attr_iter(objset_t *os, sa_hdr_phys_t *hdr, dmu_object_type_t type, 1175 sa_iterfunc_t func, sa_lot_t *tab, void *userp) 1176 { 1177 void *data_start; 1178 sa_lot_t *tb = tab; 1179 sa_lot_t search; 1180 avl_index_t loc; 1181 sa_os_t *sa = os->os_sa; 1182 int i; 1183 uint16_t *length_start = NULL; 1184 uint8_t length_idx = 0; 1185 1186 if (tab == NULL) { 1187 search.lot_num = SA_LAYOUT_NUM(hdr, type); 1188 tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); 1189 ASSERT(tb); 1190 } 1191 1192 if (IS_SA_BONUSTYPE(type)) { 1193 data_start = (void *)P2ROUNDUP(((uintptr_t)hdr + 1194 offsetof(sa_hdr_phys_t, sa_lengths) + 1195 (sizeof (uint16_t) * tb->lot_var_sizes)), 8); 1196 length_start = hdr->sa_lengths; 1197 } else { 1198 data_start = hdr; 1199 } 1200 1201 for (i = 0; i != tb->lot_attr_count; i++) { 1202 int attr_length, reg_length; 1203 uint8_t idx_len; 1204 1205 reg_length = sa->sa_attr_table[tb->lot_attrs[i]].sa_length; 1206 if (reg_length) { 1207 attr_length = reg_length; 1208 idx_len = 0; 1209 } else { 1210 attr_length = length_start[length_idx]; 1211 idx_len = length_idx++; 1212 } 1213 1214 func(hdr, data_start, tb->lot_attrs[i], attr_length, 1215 idx_len, reg_length == 0 ? B_TRUE : B_FALSE, userp); 1216 1217 data_start = (void *)P2ROUNDUP(((uintptr_t)data_start + 1218 attr_length), 8); 1219 } 1220 } 1221 1222 /*ARGSUSED*/ 1223 void 1224 sa_byteswap_cb(void *hdr, void *attr_addr, sa_attr_type_t attr, 1225 uint16_t length, int length_idx, boolean_t variable_length, void *userp) 1226 { 1227 sa_handle_t *hdl = userp; 1228 sa_os_t *sa = hdl->sa_os->os_sa; 1229 1230 sa_bswap_table[sa->sa_attr_table[attr].sa_byteswap](attr_addr, length); 1231 } 1232 1233 void 1234 sa_byteswap(sa_handle_t *hdl, sa_buf_type_t buftype) 1235 { 1236 sa_hdr_phys_t *sa_hdr_phys = SA_GET_HDR(hdl, buftype); 1237 dmu_buf_impl_t *db; 1238 sa_os_t *sa = hdl->sa_os->os_sa; 1239 int num_lengths = 1; 1240 int i; 1241 1242 ASSERT(MUTEX_HELD(&sa->sa_lock)); 1243 if (sa_hdr_phys->sa_magic == SA_MAGIC) 1244 return; 1245 1246 db = SA_GET_DB(hdl, buftype); 1247 1248 if (buftype == SA_SPILL) { 1249 arc_release(db->db_buf, NULL); 1250 arc_buf_thaw(db->db_buf); 1251 } 1252 1253 sa_hdr_phys->sa_magic = BSWAP_32(sa_hdr_phys->sa_magic); 1254 sa_hdr_phys->sa_layout_info = BSWAP_16(sa_hdr_phys->sa_layout_info); 1255 1256 /* 1257 * Determine number of variable lenghts in header 1258 * The standard 8 byte header has one for free and a 1259 * 16 byte header would have 4 + 1; 1260 */ 1261 if (SA_HDR_SIZE(sa_hdr_phys) > 8) 1262 num_lengths += (SA_HDR_SIZE(sa_hdr_phys) - 8) >> 1; 1263 for (i = 0; i != num_lengths; i++) 1264 sa_hdr_phys->sa_lengths[i] = 1265 BSWAP_16(sa_hdr_phys->sa_lengths[i]); 1266 1267 sa_attr_iter(hdl->sa_os, sa_hdr_phys, DMU_OT_SA, 1268 sa_byteswap_cb, NULL, hdl); 1269 1270 if (buftype == SA_SPILL) 1271 arc_buf_freeze(((dmu_buf_impl_t *)hdl->sa_spill)->db_buf); 1272 } 1273 1274 static int 1275 sa_build_index(sa_handle_t *hdl, sa_buf_type_t buftype) 1276 { 1277 sa_hdr_phys_t *sa_hdr_phys; 1278 dmu_buf_impl_t *db = SA_GET_DB(hdl, buftype); 1279 dmu_object_type_t bonustype = SA_BONUSTYPE_FROM_DB(db); 1280 sa_os_t *sa = hdl->sa_os->os_sa; 1281 sa_idx_tab_t *idx_tab; 1282 1283 sa_hdr_phys = SA_GET_HDR(hdl, buftype); 1284 1285 mutex_enter(&sa->sa_lock); 1286 1287 /* Do we need to byteswap? */ 1288 1289 /* only check if not old znode */ 1290 if (IS_SA_BONUSTYPE(bonustype) && sa_hdr_phys->sa_magic != SA_MAGIC && 1291 sa_hdr_phys->sa_magic != 0) { 1292 VERIFY(BSWAP_32(sa_hdr_phys->sa_magic) == SA_MAGIC); 1293 sa_byteswap(hdl, buftype); 1294 } 1295 1296 idx_tab = sa_find_idx_tab(hdl->sa_os, bonustype, sa_hdr_phys); 1297 1298 if (buftype == SA_BONUS) 1299 hdl->sa_bonus_tab = idx_tab; 1300 else 1301 hdl->sa_spill_tab = idx_tab; 1302 1303 mutex_exit(&sa->sa_lock); 1304 return (0); 1305 } 1306 1307 /*ARGSUSED*/ 1308 static void 1309 sa_evict_sync(void *dbu) 1310 { 1311 panic("evicting sa dbuf\n"); 1312 } 1313 1314 static void 1315 sa_idx_tab_rele(objset_t *os, void *arg) 1316 { 1317 sa_os_t *sa = os->os_sa; 1318 sa_idx_tab_t *idx_tab = arg; 1319 1320 if (idx_tab == NULL) 1321 return; 1322 1323 mutex_enter(&sa->sa_lock); 1324 if (refcount_remove(&idx_tab->sa_refcount, NULL) == 0) { 1325 list_remove(&idx_tab->sa_layout->lot_idx_tab, idx_tab); 1326 if (idx_tab->sa_variable_lengths) 1327 kmem_free(idx_tab->sa_variable_lengths, 1328 sizeof (uint16_t) * 1329 idx_tab->sa_layout->lot_var_sizes); 1330 refcount_destroy(&idx_tab->sa_refcount); 1331 kmem_free(idx_tab->sa_idx_tab, 1332 sizeof (uint32_t) * sa->sa_num_attrs); 1333 kmem_free(idx_tab, sizeof (sa_idx_tab_t)); 1334 } 1335 mutex_exit(&sa->sa_lock); 1336 } 1337 1338 static void 1339 sa_idx_tab_hold(objset_t *os, sa_idx_tab_t *idx_tab) 1340 { 1341 sa_os_t *sa = os->os_sa; 1342 1343 ASSERT(MUTEX_HELD(&sa->sa_lock)); 1344 (void) refcount_add(&idx_tab->sa_refcount, NULL); 1345 } 1346 1347 void 1348 sa_handle_destroy(sa_handle_t *hdl) 1349 { 1350 dmu_buf_t *db = hdl->sa_bonus; 1351 1352 mutex_enter(&hdl->sa_lock); 1353 (void) dmu_buf_remove_user(db, &hdl->sa_dbu); 1354 1355 if (hdl->sa_bonus_tab) 1356 sa_idx_tab_rele(hdl->sa_os, hdl->sa_bonus_tab); 1357 1358 if (hdl->sa_spill_tab) 1359 sa_idx_tab_rele(hdl->sa_os, hdl->sa_spill_tab); 1360 1361 dmu_buf_rele(hdl->sa_bonus, NULL); 1362 1363 if (hdl->sa_spill) 1364 dmu_buf_rele((dmu_buf_t *)hdl->sa_spill, NULL); 1365 mutex_exit(&hdl->sa_lock); 1366 1367 kmem_cache_free(sa_cache, hdl); 1368 } 1369 1370 int 1371 sa_handle_get_from_db(objset_t *os, dmu_buf_t *db, void *userp, 1372 sa_handle_type_t hdl_type, sa_handle_t **handlepp) 1373 { 1374 int error = 0; 1375 dmu_object_info_t doi; 1376 sa_handle_t *handle = NULL; 1377 1378 #ifdef ZFS_DEBUG 1379 dmu_object_info_from_db(db, &doi); 1380 ASSERT(doi.doi_bonus_type == DMU_OT_SA || 1381 doi.doi_bonus_type == DMU_OT_ZNODE); 1382 #endif 1383 /* find handle, if it exists */ 1384 /* if one doesn't exist then create a new one, and initialize it */ 1385 1386 if (hdl_type == SA_HDL_SHARED) 1387 handle = dmu_buf_get_user(db); 1388 1389 if (handle == NULL) { 1390 sa_handle_t *winner = NULL; 1391 1392 handle = kmem_cache_alloc(sa_cache, KM_SLEEP); 1393 handle->sa_dbu.dbu_evict_func_sync = NULL; 1394 handle->sa_dbu.dbu_evict_func_async = NULL; 1395 handle->sa_userp = userp; 1396 handle->sa_bonus = db; 1397 handle->sa_os = os; 1398 handle->sa_spill = NULL; 1399 handle->sa_bonus_tab = NULL; 1400 handle->sa_spill_tab = NULL; 1401 1402 error = sa_build_index(handle, SA_BONUS); 1403 1404 if (hdl_type == SA_HDL_SHARED) { 1405 dmu_buf_init_user(&handle->sa_dbu, sa_evict_sync, NULL, 1406 NULL); 1407 winner = dmu_buf_set_user_ie(db, &handle->sa_dbu); 1408 } 1409 1410 if (winner != NULL) { 1411 kmem_cache_free(sa_cache, handle); 1412 handle = winner; 1413 } 1414 } 1415 *handlepp = handle; 1416 1417 return (error); 1418 } 1419 1420 int 1421 sa_handle_get(objset_t *objset, uint64_t objid, void *userp, 1422 sa_handle_type_t hdl_type, sa_handle_t **handlepp) 1423 { 1424 dmu_buf_t *db; 1425 int error; 1426 1427 if (error = dmu_bonus_hold(objset, objid, NULL, &db)) 1428 return (error); 1429 1430 return (sa_handle_get_from_db(objset, db, userp, hdl_type, 1431 handlepp)); 1432 } 1433 1434 int 1435 sa_buf_hold(objset_t *objset, uint64_t obj_num, void *tag, dmu_buf_t **db) 1436 { 1437 return (dmu_bonus_hold(objset, obj_num, tag, db)); 1438 } 1439 1440 void 1441 sa_buf_rele(dmu_buf_t *db, void *tag) 1442 { 1443 dmu_buf_rele(db, tag); 1444 } 1445 1446 int 1447 sa_lookup_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count) 1448 { 1449 ASSERT(hdl); 1450 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1451 return (sa_attr_op(hdl, bulk, count, SA_LOOKUP, NULL)); 1452 } 1453 1454 int 1455 sa_lookup(sa_handle_t *hdl, sa_attr_type_t attr, void *buf, uint32_t buflen) 1456 { 1457 int error; 1458 sa_bulk_attr_t bulk; 1459 1460 bulk.sa_attr = attr; 1461 bulk.sa_data = buf; 1462 bulk.sa_length = buflen; 1463 bulk.sa_data_func = NULL; 1464 1465 ASSERT(hdl); 1466 mutex_enter(&hdl->sa_lock); 1467 error = sa_lookup_impl(hdl, &bulk, 1); 1468 mutex_exit(&hdl->sa_lock); 1469 return (error); 1470 } 1471 1472 #ifdef _KERNEL 1473 int 1474 sa_lookup_uio(sa_handle_t *hdl, sa_attr_type_t attr, uio_t *uio) 1475 { 1476 int error; 1477 sa_bulk_attr_t bulk; 1478 1479 bulk.sa_data = NULL; 1480 bulk.sa_attr = attr; 1481 bulk.sa_data_func = NULL; 1482 1483 ASSERT(hdl); 1484 1485 mutex_enter(&hdl->sa_lock); 1486 if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) == 0) { 1487 error = uiomove((void *)bulk.sa_addr, MIN(bulk.sa_size, 1488 uio->uio_resid), UIO_READ, uio); 1489 } 1490 mutex_exit(&hdl->sa_lock); 1491 return (error); 1492 1493 } 1494 #endif 1495 1496 void * 1497 sa_find_idx_tab(objset_t *os, dmu_object_type_t bonustype, void *data) 1498 { 1499 sa_idx_tab_t *idx_tab; 1500 sa_hdr_phys_t *hdr = (sa_hdr_phys_t *)data; 1501 sa_os_t *sa = os->os_sa; 1502 sa_lot_t *tb, search; 1503 avl_index_t loc; 1504 1505 /* 1506 * Deterimine layout number. If SA node and header == 0 then 1507 * force the index table to the dummy "1" empty layout. 1508 * 1509 * The layout number would only be zero for a newly created file 1510 * that has not added any attributes yet, or with crypto enabled which 1511 * doesn't write any attributes to the bonus buffer. 1512 */ 1513 1514 search.lot_num = SA_LAYOUT_NUM(hdr, bonustype); 1515 1516 tb = avl_find(&sa->sa_layout_num_tree, &search, &loc); 1517 1518 /* Verify header size is consistent with layout information */ 1519 ASSERT(tb); 1520 ASSERT(IS_SA_BONUSTYPE(bonustype) && 1521 SA_HDR_SIZE_MATCH_LAYOUT(hdr, tb) || !IS_SA_BONUSTYPE(bonustype) || 1522 (IS_SA_BONUSTYPE(bonustype) && hdr->sa_layout_info == 0)); 1523 1524 /* 1525 * See if any of the already existing TOC entries can be reused? 1526 */ 1527 1528 for (idx_tab = list_head(&tb->lot_idx_tab); idx_tab; 1529 idx_tab = list_next(&tb->lot_idx_tab, idx_tab)) { 1530 boolean_t valid_idx = B_TRUE; 1531 int i; 1532 1533 if (tb->lot_var_sizes != 0 && 1534 idx_tab->sa_variable_lengths != NULL) { 1535 for (i = 0; i != tb->lot_var_sizes; i++) { 1536 if (hdr->sa_lengths[i] != 1537 idx_tab->sa_variable_lengths[i]) { 1538 valid_idx = B_FALSE; 1539 break; 1540 } 1541 } 1542 } 1543 if (valid_idx) { 1544 sa_idx_tab_hold(os, idx_tab); 1545 return (idx_tab); 1546 } 1547 } 1548 1549 /* No such luck, create a new entry */ 1550 idx_tab = kmem_zalloc(sizeof (sa_idx_tab_t), KM_SLEEP); 1551 idx_tab->sa_idx_tab = 1552 kmem_zalloc(sizeof (uint32_t) * sa->sa_num_attrs, KM_SLEEP); 1553 idx_tab->sa_layout = tb; 1554 refcount_create(&idx_tab->sa_refcount); 1555 if (tb->lot_var_sizes) 1556 idx_tab->sa_variable_lengths = kmem_alloc(sizeof (uint16_t) * 1557 tb->lot_var_sizes, KM_SLEEP); 1558 1559 sa_attr_iter(os, hdr, bonustype, sa_build_idx_tab, 1560 tb, idx_tab); 1561 sa_idx_tab_hold(os, idx_tab); /* one hold for consumer */ 1562 sa_idx_tab_hold(os, idx_tab); /* one for layout */ 1563 list_insert_tail(&tb->lot_idx_tab, idx_tab); 1564 return (idx_tab); 1565 } 1566 1567 void 1568 sa_default_locator(void **dataptr, uint32_t *len, uint32_t total_len, 1569 boolean_t start, void *userdata) 1570 { 1571 ASSERT(start); 1572 1573 *dataptr = userdata; 1574 *len = total_len; 1575 } 1576 1577 static void 1578 sa_attr_register_sync(sa_handle_t *hdl, dmu_tx_t *tx) 1579 { 1580 uint64_t attr_value = 0; 1581 sa_os_t *sa = hdl->sa_os->os_sa; 1582 sa_attr_table_t *tb = sa->sa_attr_table; 1583 int i; 1584 1585 mutex_enter(&sa->sa_lock); 1586 1587 if (!sa->sa_need_attr_registration || sa->sa_master_obj == 0) { 1588 mutex_exit(&sa->sa_lock); 1589 return; 1590 } 1591 1592 if (sa->sa_reg_attr_obj == 0) { 1593 sa->sa_reg_attr_obj = zap_create_link(hdl->sa_os, 1594 DMU_OT_SA_ATTR_REGISTRATION, 1595 sa->sa_master_obj, SA_REGISTRY, tx); 1596 } 1597 for (i = 0; i != sa->sa_num_attrs; i++) { 1598 if (sa->sa_attr_table[i].sa_registered) 1599 continue; 1600 ATTR_ENCODE(attr_value, tb[i].sa_attr, tb[i].sa_length, 1601 tb[i].sa_byteswap); 1602 VERIFY(0 == zap_update(hdl->sa_os, sa->sa_reg_attr_obj, 1603 tb[i].sa_name, 8, 1, &attr_value, tx)); 1604 tb[i].sa_registered = B_TRUE; 1605 } 1606 sa->sa_need_attr_registration = B_FALSE; 1607 mutex_exit(&sa->sa_lock); 1608 } 1609 1610 /* 1611 * Replace all attributes with attributes specified in template. 1612 * If dnode had a spill buffer then those attributes will be 1613 * also be replaced, possibly with just an empty spill block 1614 * 1615 * This interface is intended to only be used for bulk adding of 1616 * attributes for a new file. It will also be used by the ZPL 1617 * when converting and old formatted znode to native SA support. 1618 */ 1619 int 1620 sa_replace_all_by_template_locked(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, 1621 int attr_count, dmu_tx_t *tx) 1622 { 1623 sa_os_t *sa = hdl->sa_os->os_sa; 1624 1625 if (sa->sa_need_attr_registration) 1626 sa_attr_register_sync(hdl, tx); 1627 return (sa_build_layouts(hdl, attr_desc, attr_count, tx)); 1628 } 1629 1630 int 1631 sa_replace_all_by_template(sa_handle_t *hdl, sa_bulk_attr_t *attr_desc, 1632 int attr_count, dmu_tx_t *tx) 1633 { 1634 int error; 1635 1636 mutex_enter(&hdl->sa_lock); 1637 error = sa_replace_all_by_template_locked(hdl, attr_desc, 1638 attr_count, tx); 1639 mutex_exit(&hdl->sa_lock); 1640 return (error); 1641 } 1642 1643 /* 1644 * Add/remove a single attribute or replace a variable-sized attribute value 1645 * with a value of a different size, and then rewrite the entire set 1646 * of attributes. 1647 * Same-length attribute value replacement (including fixed-length attributes) 1648 * is handled more efficiently by the upper layers. 1649 */ 1650 static int 1651 sa_modify_attrs(sa_handle_t *hdl, sa_attr_type_t newattr, 1652 sa_data_op_t action, sa_data_locator_t *locator, void *datastart, 1653 uint16_t buflen, dmu_tx_t *tx) 1654 { 1655 sa_os_t *sa = hdl->sa_os->os_sa; 1656 dmu_buf_impl_t *db = (dmu_buf_impl_t *)hdl->sa_bonus; 1657 dnode_t *dn; 1658 sa_bulk_attr_t *attr_desc; 1659 void *old_data[2]; 1660 int bonus_attr_count = 0; 1661 int bonus_data_size = 0; 1662 int spill_data_size = 0; 1663 int spill_attr_count = 0; 1664 int error; 1665 uint16_t length, reg_length; 1666 int i, j, k, length_idx; 1667 sa_hdr_phys_t *hdr; 1668 sa_idx_tab_t *idx_tab; 1669 int attr_count; 1670 int count; 1671 1672 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1673 1674 /* First make of copy of the old data */ 1675 1676 DB_DNODE_ENTER(db); 1677 dn = DB_DNODE(db); 1678 if (dn->dn_bonuslen != 0) { 1679 bonus_data_size = hdl->sa_bonus->db_size; 1680 old_data[0] = kmem_alloc(bonus_data_size, KM_SLEEP); 1681 bcopy(hdl->sa_bonus->db_data, old_data[0], 1682 hdl->sa_bonus->db_size); 1683 bonus_attr_count = hdl->sa_bonus_tab->sa_layout->lot_attr_count; 1684 } else { 1685 old_data[0] = NULL; 1686 } 1687 DB_DNODE_EXIT(db); 1688 1689 /* Bring spill buffer online if it isn't currently */ 1690 1691 if ((error = sa_get_spill(hdl)) == 0) { 1692 spill_data_size = hdl->sa_spill->db_size; 1693 old_data[1] = kmem_alloc(spill_data_size, KM_SLEEP); 1694 bcopy(hdl->sa_spill->db_data, old_data[1], 1695 hdl->sa_spill->db_size); 1696 spill_attr_count = 1697 hdl->sa_spill_tab->sa_layout->lot_attr_count; 1698 } else if (error && error != ENOENT) { 1699 if (old_data[0]) 1700 kmem_free(old_data[0], bonus_data_size); 1701 return (error); 1702 } else { 1703 old_data[1] = NULL; 1704 } 1705 1706 /* build descriptor of all attributes */ 1707 1708 attr_count = bonus_attr_count + spill_attr_count; 1709 if (action == SA_ADD) 1710 attr_count++; 1711 else if (action == SA_REMOVE) 1712 attr_count--; 1713 1714 attr_desc = kmem_zalloc(sizeof (sa_bulk_attr_t) * attr_count, KM_SLEEP); 1715 1716 /* 1717 * loop through bonus and spill buffer if it exists, and 1718 * build up new attr_descriptor to reset the attributes 1719 */ 1720 k = j = 0; 1721 count = bonus_attr_count; 1722 hdr = SA_GET_HDR(hdl, SA_BONUS); 1723 idx_tab = SA_IDX_TAB_GET(hdl, SA_BONUS); 1724 for (; k != 2; k++) { 1725 /* 1726 * Iterate over each attribute in layout. Fetch the 1727 * size of variable-length attributes needing rewrite 1728 * from sa_lengths[]. 1729 */ 1730 for (i = 0, length_idx = 0; i != count; i++) { 1731 sa_attr_type_t attr; 1732 1733 attr = idx_tab->sa_layout->lot_attrs[i]; 1734 reg_length = SA_REGISTERED_LEN(sa, attr); 1735 if (reg_length == 0) { 1736 length = hdr->sa_lengths[length_idx]; 1737 length_idx++; 1738 } else { 1739 length = reg_length; 1740 } 1741 if (attr == newattr) { 1742 /* 1743 * There is nothing to do for SA_REMOVE, 1744 * so it is just skipped. 1745 */ 1746 if (action == SA_REMOVE) 1747 continue; 1748 1749 /* 1750 * Duplicate attributes are not allowed, so the 1751 * action can not be SA_ADD here. 1752 */ 1753 ASSERT3S(action, ==, SA_REPLACE); 1754 1755 /* 1756 * Only a variable-sized attribute can be 1757 * replaced here, and its size must be changing. 1758 */ 1759 ASSERT3U(reg_length, ==, 0); 1760 ASSERT3U(length, !=, buflen); 1761 SA_ADD_BULK_ATTR(attr_desc, j, attr, 1762 locator, datastart, buflen); 1763 } else { 1764 SA_ADD_BULK_ATTR(attr_desc, j, attr, 1765 NULL, (void *) 1766 (TOC_OFF(idx_tab->sa_idx_tab[attr]) + 1767 (uintptr_t)old_data[k]), length); 1768 } 1769 } 1770 if (k == 0 && hdl->sa_spill) { 1771 hdr = SA_GET_HDR(hdl, SA_SPILL); 1772 idx_tab = SA_IDX_TAB_GET(hdl, SA_SPILL); 1773 count = spill_attr_count; 1774 } else { 1775 break; 1776 } 1777 } 1778 if (action == SA_ADD) { 1779 reg_length = SA_REGISTERED_LEN(sa, newattr); 1780 IMPLY(reg_length != 0, reg_length == buflen); 1781 SA_ADD_BULK_ATTR(attr_desc, j, newattr, locator, 1782 datastart, buflen); 1783 } 1784 ASSERT3U(j, ==, attr_count); 1785 1786 error = sa_build_layouts(hdl, attr_desc, attr_count, tx); 1787 1788 if (old_data[0]) 1789 kmem_free(old_data[0], bonus_data_size); 1790 if (old_data[1]) 1791 kmem_free(old_data[1], spill_data_size); 1792 kmem_free(attr_desc, sizeof (sa_bulk_attr_t) * attr_count); 1793 1794 return (error); 1795 } 1796 1797 static int 1798 sa_bulk_update_impl(sa_handle_t *hdl, sa_bulk_attr_t *bulk, int count, 1799 dmu_tx_t *tx) 1800 { 1801 int error; 1802 sa_os_t *sa = hdl->sa_os->os_sa; 1803 dmu_object_type_t bonustype; 1804 1805 bonustype = SA_BONUSTYPE_FROM_DB(SA_GET_DB(hdl, SA_BONUS)); 1806 1807 ASSERT(hdl); 1808 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1809 1810 /* sync out registration table if necessary */ 1811 if (sa->sa_need_attr_registration) 1812 sa_attr_register_sync(hdl, tx); 1813 1814 error = sa_attr_op(hdl, bulk, count, SA_UPDATE, tx); 1815 if (error == 0 && !IS_SA_BONUSTYPE(bonustype) && sa->sa_update_cb) 1816 sa->sa_update_cb(hdl, tx); 1817 1818 return (error); 1819 } 1820 1821 /* 1822 * update or add new attribute 1823 */ 1824 int 1825 sa_update(sa_handle_t *hdl, sa_attr_type_t type, 1826 void *buf, uint32_t buflen, dmu_tx_t *tx) 1827 { 1828 int error; 1829 sa_bulk_attr_t bulk; 1830 1831 bulk.sa_attr = type; 1832 bulk.sa_data_func = NULL; 1833 bulk.sa_length = buflen; 1834 bulk.sa_data = buf; 1835 1836 mutex_enter(&hdl->sa_lock); 1837 error = sa_bulk_update_impl(hdl, &bulk, 1, tx); 1838 mutex_exit(&hdl->sa_lock); 1839 return (error); 1840 } 1841 1842 int 1843 sa_update_from_cb(sa_handle_t *hdl, sa_attr_type_t attr, 1844 uint32_t buflen, sa_data_locator_t *locator, void *userdata, dmu_tx_t *tx) 1845 { 1846 int error; 1847 sa_bulk_attr_t bulk; 1848 1849 bulk.sa_attr = attr; 1850 bulk.sa_data = userdata; 1851 bulk.sa_data_func = locator; 1852 bulk.sa_length = buflen; 1853 1854 mutex_enter(&hdl->sa_lock); 1855 error = sa_bulk_update_impl(hdl, &bulk, 1, tx); 1856 mutex_exit(&hdl->sa_lock); 1857 return (error); 1858 } 1859 1860 /* 1861 * Return size of an attribute 1862 */ 1863 1864 int 1865 sa_size(sa_handle_t *hdl, sa_attr_type_t attr, int *size) 1866 { 1867 sa_bulk_attr_t bulk; 1868 int error; 1869 1870 bulk.sa_data = NULL; 1871 bulk.sa_attr = attr; 1872 bulk.sa_data_func = NULL; 1873 1874 ASSERT(hdl); 1875 mutex_enter(&hdl->sa_lock); 1876 if ((error = sa_attr_op(hdl, &bulk, 1, SA_LOOKUP, NULL)) != 0) { 1877 mutex_exit(&hdl->sa_lock); 1878 return (error); 1879 } 1880 *size = bulk.sa_size; 1881 1882 mutex_exit(&hdl->sa_lock); 1883 return (0); 1884 } 1885 1886 int 1887 sa_bulk_lookup_locked(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) 1888 { 1889 ASSERT(hdl); 1890 ASSERT(MUTEX_HELD(&hdl->sa_lock)); 1891 return (sa_lookup_impl(hdl, attrs, count)); 1892 } 1893 1894 int 1895 sa_bulk_lookup(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count) 1896 { 1897 int error; 1898 1899 ASSERT(hdl); 1900 mutex_enter(&hdl->sa_lock); 1901 error = sa_bulk_lookup_locked(hdl, attrs, count); 1902 mutex_exit(&hdl->sa_lock); 1903 return (error); 1904 } 1905 1906 int 1907 sa_bulk_update(sa_handle_t *hdl, sa_bulk_attr_t *attrs, int count, dmu_tx_t *tx) 1908 { 1909 int error; 1910 1911 ASSERT(hdl); 1912 mutex_enter(&hdl->sa_lock); 1913 error = sa_bulk_update_impl(hdl, attrs, count, tx); 1914 mutex_exit(&hdl->sa_lock); 1915 return (error); 1916 } 1917 1918 int 1919 sa_remove(sa_handle_t *hdl, sa_attr_type_t attr, dmu_tx_t *tx) 1920 { 1921 int error; 1922 1923 mutex_enter(&hdl->sa_lock); 1924 error = sa_modify_attrs(hdl, attr, SA_REMOVE, NULL, 1925 NULL, 0, tx); 1926 mutex_exit(&hdl->sa_lock); 1927 return (error); 1928 } 1929 1930 void 1931 sa_object_info(sa_handle_t *hdl, dmu_object_info_t *doi) 1932 { 1933 dmu_object_info_from_db((dmu_buf_t *)hdl->sa_bonus, doi); 1934 } 1935 1936 void 1937 sa_object_size(sa_handle_t *hdl, uint32_t *blksize, u_longlong_t *nblocks) 1938 { 1939 dmu_object_size_from_db((dmu_buf_t *)hdl->sa_bonus, 1940 blksize, nblocks); 1941 } 1942 1943 void 1944 sa_set_userp(sa_handle_t *hdl, void *ptr) 1945 { 1946 hdl->sa_userp = ptr; 1947 } 1948 1949 dmu_buf_t * 1950 sa_get_db(sa_handle_t *hdl) 1951 { 1952 return ((dmu_buf_t *)hdl->sa_bonus); 1953 } 1954 1955 void * 1956 sa_get_userdata(sa_handle_t *hdl) 1957 { 1958 return (hdl->sa_userp); 1959 } 1960 1961 void 1962 sa_register_update_callback_locked(objset_t *os, sa_update_cb_t *func) 1963 { 1964 ASSERT(MUTEX_HELD(&os->os_sa->sa_lock)); 1965 os->os_sa->sa_update_cb = func; 1966 } 1967 1968 void 1969 sa_register_update_callback(objset_t *os, sa_update_cb_t *func) 1970 { 1971 1972 mutex_enter(&os->os_sa->sa_lock); 1973 sa_register_update_callback_locked(os, func); 1974 mutex_exit(&os->os_sa->sa_lock); 1975 } 1976 1977 uint64_t 1978 sa_handle_object(sa_handle_t *hdl) 1979 { 1980 return (hdl->sa_bonus->db_object); 1981 } 1982 1983 boolean_t 1984 sa_enabled(objset_t *os) 1985 { 1986 return (os->os_sa == NULL); 1987 } 1988 1989 int 1990 sa_set_sa_object(objset_t *os, uint64_t sa_object) 1991 { 1992 sa_os_t *sa = os->os_sa; 1993 1994 if (sa->sa_master_obj) 1995 return (1); 1996 1997 sa->sa_master_obj = sa_object; 1998 1999 return (0); 2000 } 2001 2002 int 2003 sa_hdrsize(void *arg) 2004 { 2005 sa_hdr_phys_t *hdr = arg; 2006 2007 return (SA_HDR_SIZE(hdr)); 2008 } 2009 2010 void 2011 sa_handle_lock(sa_handle_t *hdl) 2012 { 2013 ASSERT(hdl); 2014 mutex_enter(&hdl->sa_lock); 2015 } 2016 2017 void 2018 sa_handle_unlock(sa_handle_t *hdl) 2019 { 2020 ASSERT(hdl); 2021 mutex_exit(&hdl->sa_lock); 2022 } 2023