1 /* $NetBSD: refclock_parse.c,v 1.18 2016/01/08 21:35:39 christos Exp $ */ 2 3 /* 4 * /src/NTP/REPOSITORY/ntp4-dev/ntpd/refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A 5 * 6 * refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A 7 * 8 * generic reference clock driver for several DCF/GPS/MSF/... receivers 9 * 10 * PPS notes: 11 * On systems that support PPSAPI (RFC2783) PPSAPI is the 12 * preferred interface. 13 * 14 * Optionally make use of a STREAMS module for input processing where 15 * available and configured. This STREAMS module reduces the time 16 * stamp latency for serial and PPS events. 17 * Currently the STREAMS module is only available for Suns running 18 * SunOS 4.x and SunOS5.x. 19 * 20 * Copyright (c) 1995-2015 by Frank Kardel <kardel <AT> ntp.org> 21 * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universitaet Erlangen-Nuernberg, Germany 22 * 23 * Redistribution and use in source and binary forms, with or without 24 * modification, are permitted provided that the following conditions 25 * are met: 26 * 1. Redistributions of source code must retain the above copyright 27 * notice, this list of conditions and the following disclaimer. 28 * 2. Redistributions in binary form must reproduce the above copyright 29 * notice, this list of conditions and the following disclaimer in the 30 * documentation and/or other materials provided with the distribution. 31 * 3. Neither the name of the author nor the names of its contributors 32 * may be used to endorse or promote products derived from this software 33 * without specific prior written permission. 34 * 35 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND 36 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 37 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 38 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE 39 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL 40 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS 41 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 42 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 43 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 44 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 45 * SUCH DAMAGE. 46 * 47 */ 48 49 #ifdef HAVE_CONFIG_H 50 # include "config.h" 51 #endif 52 53 #include "ntp_types.h" 54 55 #if defined(REFCLOCK) && defined(CLOCK_PARSE) 56 57 /* 58 * This driver currently provides the support for 59 * - Meinberg receiver DCF77 PZF535 (TCXO version) (DCF) 60 * - Meinberg receiver DCF77 PZF535 (OCXO version) (DCF) 61 * - Meinberg receiver DCF77 PZF509 (DCF) 62 * - Meinberg receiver DCF77 AM receivers (e.g. C51) (DCF) 63 * - IGEL CLOCK (DCF) 64 * - ELV DCF7000 (DCF) 65 * - Schmid clock (DCF) 66 * - Conrad DCF77 receiver module (DCF) 67 * - FAU DCF77 NTP receiver (TimeBrick) (DCF) 68 * - WHARTON 400A Series clock (DCF) 69 * 70 * - Meinberg GPS receivers (GPS) 71 * - Trimble (TSIP and TAIP protocol) (GPS) 72 * 73 * - RCC8000 MSF Receiver (MSF) 74 * - VARITEXT clock (MSF) 75 */ 76 77 /* 78 * Meinberg receivers are usually connected via a 79 * 9600/7E1 or 19200/8N1 serial line. 80 * 81 * The Meinberg GPS receivers also have a special NTP time stamp 82 * format. The firmware release is Uni-Erlangen. 83 * 84 * Meinberg generic receiver setup: 85 * output time code every second 86 * Baud rate 9600 7E2S 87 * 88 * Meinberg GPS receiver setup: 89 * output time code every second 90 * Baudrate 19200 8N1 91 * 92 * This software supports the standard data formats used 93 * in Meinberg receivers. 94 * 95 * Special software versions are only sensible for the 96 * oldest GPS receiver, GPS16x. For newer receiver types 97 * the output string format can be configured at the device, 98 * and the device name is generally GPSxxx instead of GPS16x. 99 * 100 * Meinberg can be reached via: http://www.meinberg.de/ 101 */ 102 103 #include "ntpd.h" 104 #include "ntp_refclock.h" 105 #include "timevalops.h" /* includes <sys/time.h> */ 106 #include "ntp_control.h" 107 #include "ntp_string.h" 108 109 #include <stdio.h> 110 #include <ctype.h> 111 #ifndef TM_IN_SYS_TIME 112 # include <time.h> 113 #endif 114 115 #ifdef HAVE_UNISTD_H 116 # include <unistd.h> 117 #endif 118 119 #if !defined(STREAM) && !defined(HAVE_SYSV_TTYS) && !defined(HAVE_BSD_TTYS) && !defined(HAVE_TERMIOS) 120 # include "Bletch: Define one of {STREAM,HAVE_SYSV_TTYS,HAVE_TERMIOS}" 121 #endif 122 123 #ifdef STREAM 124 # include <sys/stream.h> 125 # include <sys/stropts.h> 126 #endif 127 128 #ifdef HAVE_TERMIOS 129 # include <termios.h> 130 # define TTY_GETATTR(_FD_, _ARG_) tcgetattr((_FD_), (_ARG_)) 131 # define TTY_SETATTR(_FD_, _ARG_) tcsetattr((_FD_), TCSANOW, (_ARG_)) 132 # undef HAVE_SYSV_TTYS 133 #endif 134 135 #ifdef HAVE_SYSV_TTYS 136 # define TTY_GETATTR(_FD_, _ARG_) ioctl((_FD_), TCGETA, (_ARG_)) 137 # define TTY_SETATTR(_FD_, _ARG_) ioctl((_FD_), TCSETAW, (_ARG_)) 138 #endif 139 140 #ifdef HAVE_BSD_TTYS 141 /* #error CURRENTLY NO BSD TTY SUPPORT */ 142 # include "Bletch: BSD TTY not currently supported" 143 #endif 144 145 #ifdef HAVE_SYS_IOCTL_H 146 # include <sys/ioctl.h> 147 #endif 148 149 #ifdef HAVE_PPSAPI 150 # include "ppsapi_timepps.h" 151 # include "refclock_atom.h" 152 #endif 153 154 #ifdef PPS 155 # ifdef HAVE_SYS_PPSCLOCK_H 156 # include <sys/ppsclock.h> 157 # endif 158 # ifdef HAVE_TIO_SERIAL_STUFF 159 # include <linux/serial.h> 160 # endif 161 #endif 162 163 # define BUFFER_SIZE(_BUF, _PTR) ((int)((_BUF) + sizeof(_BUF) - (_PTR))) 164 # define BUFFER_SIZES(_BUF, _PTR, _SZ) ((int)((_BUF) + (_SZ) - (_PTR))) 165 166 /* 167 * document type of PPS interfacing - copy of ifdef mechanism in local_input() 168 */ 169 #undef PPS_METHOD 170 171 #ifdef HAVE_PPSAPI 172 #define PPS_METHOD "PPS API" 173 #else 174 #ifdef TIOCDCDTIMESTAMP 175 #define PPS_METHOD "TIOCDCDTIMESTAMP" 176 #else /* TIOCDCDTIMESTAMP */ 177 #if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) 178 #ifdef HAVE_CIOGETEV 179 #define PPS_METHOD "CIOGETEV" 180 #endif 181 #ifdef HAVE_TIOCGPPSEV 182 #define PPS_METHOD "TIOCGPPSEV" 183 #endif 184 #endif 185 #endif /* TIOCDCDTIMESTAMP */ 186 #endif /* HAVE_PPSAPI */ 187 188 /* 189 * COND_DEF can be conditionally defined as DEF or 0. If defined as DEF 190 * then some more parse-specific variables are flagged to be printed with 191 * "ntpq -c cv <assid>". This can be lengthy, so by default COND_DEF 192 * should be defined as 0. 193 */ 194 #if 0 195 # define COND_DEF DEF // enable this for testing 196 #else 197 # define COND_DEF 0 // enable this by default 198 #endif 199 200 #include "ntp_io.h" 201 #include "ntp_stdlib.h" 202 203 #include "parse.h" 204 #include "mbg_gps166.h" 205 #include "trimble.h" 206 #include "binio.h" 207 #include "ascii.h" 208 #include "ieee754io.h" 209 #include "recvbuff.h" 210 211 static char rcsid[] = "refclock_parse.c,v 4.81 2009/05/01 10:15:29 kardel RELEASE_20090105_A+POWERUPTRUST"; 212 213 /**=========================================================================== 214 ** external interface to ntp mechanism 215 **/ 216 217 static int parse_start (int, struct peer *); 218 static void parse_shutdown (int, struct peer *); 219 static void parse_poll (int, struct peer *); 220 static void parse_control (int, const struct refclockstat *, struct refclockstat *, struct peer *); 221 222 struct refclock refclock_parse = { 223 parse_start, 224 parse_shutdown, 225 parse_poll, 226 parse_control, 227 noentry, 228 noentry, 229 NOFLAGS 230 }; 231 232 /* 233 * Definitions 234 */ 235 #define MAXUNITS 4 /* maximum number of "PARSE" units permitted */ 236 #define PARSEDEVICE "/dev/refclock-%d" /* device to open %d is unit number */ 237 #define PARSEPPSDEVICE "/dev/refclockpps-%d" /* optional pps device to open %d is unit number */ 238 239 #undef ABS 240 #define ABS(_X_) (((_X_) < 0) ? -(_X_) : (_X_)) 241 242 #define PARSE_HARDPPS_DISABLE 0 243 #define PARSE_HARDPPS_ENABLE 1 244 245 /**=========================================================================== 246 ** function vector for dynamically binding io handling mechanism 247 **/ 248 249 struct parseunit; /* to keep inquiring minds happy */ 250 251 typedef struct bind 252 { 253 const char *bd_description; /* name of type of binding */ 254 int (*bd_init) (struct parseunit *); /* initialize */ 255 void (*bd_end) (struct parseunit *); /* end */ 256 int (*bd_setcs) (struct parseunit *, parsectl_t *); /* set character size */ 257 int (*bd_disable) (struct parseunit *); /* disable */ 258 int (*bd_enable) (struct parseunit *); /* enable */ 259 int (*bd_getfmt) (struct parseunit *, parsectl_t *); /* get format */ 260 int (*bd_setfmt) (struct parseunit *, parsectl_t *); /* setfmt */ 261 int (*bd_timecode) (struct parseunit *, parsectl_t *); /* get time code */ 262 void (*bd_receive) (struct recvbuf *); /* receive operation */ 263 int (*bd_io_input) (struct recvbuf *); /* input operation */ 264 } bind_t; 265 266 #define PARSE_END(_X_) (*(_X_)->binding->bd_end)(_X_) 267 #define PARSE_SETCS(_X_, _CS_) (*(_X_)->binding->bd_setcs)(_X_, _CS_) 268 #define PARSE_ENABLE(_X_) (*(_X_)->binding->bd_enable)(_X_) 269 #define PARSE_DISABLE(_X_) (*(_X_)->binding->bd_disable)(_X_) 270 #define PARSE_GETFMT(_X_, _DCT_) (*(_X_)->binding->bd_getfmt)(_X_, _DCT_) 271 #define PARSE_SETFMT(_X_, _DCT_) (*(_X_)->binding->bd_setfmt)(_X_, _DCT_) 272 #define PARSE_GETTIMECODE(_X_, _DCT_) (*(_X_)->binding->bd_timecode)(_X_, _DCT_) 273 274 /* 275 * special handling flags 276 */ 277 #define PARSE_F_PPSONSECOND 0x00000001 /* PPS pulses are on second */ 278 #define PARSE_F_POWERUPTRUST 0x00000100 /* POWERUP state ist trusted for */ 279 /* trusttime after SYNC was seen */ 280 /**=========================================================================== 281 ** error message regression handling 282 ** 283 ** there are quite a few errors that can occur in rapid succession such as 284 ** noisy input data or no data at all. in order to reduce the amount of 285 ** syslog messages in such case, we are using a backoff algorithm. We limit 286 ** the number of error messages of a certain class to 1 per time unit. if a 287 ** configurable number of messages is displayed that way, we move on to the 288 ** next time unit / count for that class. a count of messages that have been 289 ** suppressed is held and displayed whenever a corresponding message is 290 ** displayed. the time units for a message class will also be displayed. 291 ** whenever an error condition clears we reset the error message state, 292 ** thus we would still generate much output on pathological conditions 293 ** where the system oscillates between OK and NOT OK states. coping 294 ** with that condition is currently considered too complicated. 295 **/ 296 297 #define ERR_ALL (unsigned)~0 /* "all" errors */ 298 #define ERR_BADDATA (unsigned)0 /* unusable input data/conversion errors */ 299 #define ERR_NODATA (unsigned)1 /* no input data */ 300 #define ERR_BADIO (unsigned)2 /* read/write/select errors */ 301 #define ERR_BADSTATUS (unsigned)3 /* unsync states */ 302 #define ERR_BADEVENT (unsigned)4 /* non nominal events */ 303 #define ERR_INTERNAL (unsigned)5 /* internal error */ 304 #define ERR_CNT (unsigned)(ERR_INTERNAL+1) 305 306 #define ERR(_X_) if (list_err(parse, (_X_))) 307 308 struct errorregression 309 { 310 u_long err_count; /* number of repititions per class */ 311 u_long err_delay; /* minimum delay between messages */ 312 }; 313 314 static struct errorregression 315 err_baddata[] = /* error messages for bad input data */ 316 { 317 { 1, 0 }, /* output first message immediately */ 318 { 5, 60 }, /* output next five messages in 60 second intervals */ 319 { 3, 3600 }, /* output next 3 messages in hour intervals */ 320 { 0, 12*3600 } /* repeat messages only every 12 hours */ 321 }; 322 323 static struct errorregression 324 err_nodata[] = /* error messages for missing input data */ 325 { 326 { 1, 0 }, /* output first message immediately */ 327 { 5, 60 }, /* output next five messages in 60 second intervals */ 328 { 3, 3600 }, /* output next 3 messages in hour intervals */ 329 { 0, 12*3600 } /* repeat messages only every 12 hours */ 330 }; 331 332 static struct errorregression 333 err_badstatus[] = /* unsynchronized state messages */ 334 { 335 { 1, 0 }, /* output first message immediately */ 336 { 5, 60 }, /* output next five messages in 60 second intervals */ 337 { 3, 3600 }, /* output next 3 messages in hour intervals */ 338 { 0, 12*3600 } /* repeat messages only every 12 hours */ 339 }; 340 341 static struct errorregression 342 err_badio[] = /* io failures (bad reads, selects, ...) */ 343 { 344 { 1, 0 }, /* output first message immediately */ 345 { 5, 60 }, /* output next five messages in 60 second intervals */ 346 { 5, 3600 }, /* output next 3 messages in hour intervals */ 347 { 0, 12*3600 } /* repeat messages only every 12 hours */ 348 }; 349 350 static struct errorregression 351 err_badevent[] = /* non nominal events */ 352 { 353 { 20, 0 }, /* output first message immediately */ 354 { 6, 60 }, /* output next five messages in 60 second intervals */ 355 { 5, 3600 }, /* output next 3 messages in hour intervals */ 356 { 0, 12*3600 } /* repeat messages only every 12 hours */ 357 }; 358 359 static struct errorregression 360 err_internal[] = /* really bad things - basically coding/OS errors */ 361 { 362 { 0, 0 }, /* output all messages immediately */ 363 }; 364 365 static struct errorregression * 366 err_tbl[] = 367 { 368 err_baddata, 369 err_nodata, 370 err_badio, 371 err_badstatus, 372 err_badevent, 373 err_internal 374 }; 375 376 struct errorinfo 377 { 378 u_long err_started; /* begin time (ntp) of error condition */ 379 u_long err_last; /* last time (ntp) error occurred */ 380 u_long err_cnt; /* number of error repititions */ 381 u_long err_suppressed; /* number of suppressed messages */ 382 struct errorregression *err_stage; /* current error stage */ 383 }; 384 385 /**=========================================================================== 386 ** refclock instance data 387 **/ 388 389 struct parseunit 390 { 391 /* 392 * NTP management 393 */ 394 struct peer *peer; /* backlink to peer structure - refclock inactive if 0 */ 395 struct refclockproc *generic; /* backlink to refclockproc structure */ 396 397 /* 398 * PARSE io 399 */ 400 bind_t *binding; /* io handling binding */ 401 402 /* 403 * parse state 404 */ 405 parse_t parseio; /* io handling structure (user level parsing) */ 406 407 /* 408 * type specific parameters 409 */ 410 struct parse_clockinfo *parse_type; /* link to clock description */ 411 412 /* 413 * clock state handling/reporting 414 */ 415 u_char flags; /* flags (leap_control) */ 416 u_long lastchange; /* time (ntp) when last state change accured */ 417 u_long statetime[CEVNT_MAX+1]; /* accumulated time of clock states */ 418 u_long pollneeddata; /* current_time(!=0) for receive sample expected in PPS mode */ 419 u_short lastformat; /* last format used */ 420 u_long lastsync; /* time (ntp) when clock was last seen fully synchronized */ 421 u_long maxunsync; /* max time in seconds a receiver is trusted after loosing synchronisation */ 422 double ppsphaseadjust; /* phase adjustment of PPS time stamp */ 423 u_long lastmissed; /* time (ntp) when poll didn't get data (powerup heuristic) */ 424 u_long ppsserial; /* magic cookie for ppsclock serials (avoids stale ppsclock data) */ 425 int ppsfd; /* fd to ise for PPS io */ 426 #ifdef HAVE_PPSAPI 427 int hardppsstate; /* current hard pps state */ 428 struct refclock_atom atom; /* PPSAPI structure */ 429 #endif 430 parsetime_t timedata; /* last (parse module) data */ 431 void *localdata; /* optional local, receiver-specific data */ 432 unsigned long localstate; /* private local state */ 433 struct errorinfo errors[ERR_CNT]; /* error state table for suppressing excessive error messages */ 434 struct ctl_var *kv; /* additional pseudo variables */ 435 u_long laststatistic; /* time when staticstics where output */ 436 }; 437 438 439 /**=========================================================================== 440 ** Clockinfo section all parameter for specific clock types 441 ** includes NTP parameters, TTY parameters and IO handling parameters 442 **/ 443 444 static void poll_dpoll (struct parseunit *); 445 static void poll_poll (struct peer *); 446 static int poll_init (struct parseunit *); 447 448 typedef struct poll_info 449 { 450 u_long rate; /* poll rate - once every "rate" seconds - 0 off */ 451 const char *string; /* string to send for polling */ 452 u_long count; /* number of characters in string */ 453 } poll_info_t; 454 455 #define NO_CL_FLAGS 0 456 #define NO_POLL 0 457 #define NO_INIT 0 458 #define NO_END 0 459 #define NO_EVENT 0 460 #define NO_LCLDATA 0 461 #define NO_MESSAGE 0 462 #define NO_PPSDELAY 0 463 464 #define DCF_ID "DCF" /* generic DCF */ 465 #define DCF_A_ID "DCFa" /* AM demodulation */ 466 #define DCF_P_ID "DCFp" /* psuedo random phase shift */ 467 #define GPS_ID "GPS" /* GPS receiver */ 468 469 #define NOCLOCK_ROOTDELAY 0.0 470 #define NOCLOCK_BASEDELAY 0.0 471 #define NOCLOCK_DESCRIPTION 0 472 #define NOCLOCK_MAXUNSYNC 0 473 #define NOCLOCK_CFLAG 0 474 #define NOCLOCK_IFLAG 0 475 #define NOCLOCK_OFLAG 0 476 #define NOCLOCK_LFLAG 0 477 #define NOCLOCK_ID "TILT" 478 #define NOCLOCK_POLL NO_POLL 479 #define NOCLOCK_INIT NO_INIT 480 #define NOCLOCK_END NO_END 481 #define NOCLOCK_DATA NO_LCLDATA 482 #define NOCLOCK_FORMAT "" 483 #define NOCLOCK_TYPE CTL_SST_TS_UNSPEC 484 #define NOCLOCK_SAMPLES 0 485 #define NOCLOCK_KEEP 0 486 487 #define DCF_TYPE CTL_SST_TS_LF 488 #define GPS_TYPE CTL_SST_TS_UHF 489 490 /* 491 * receiver specific constants 492 */ 493 #define MBG_SPEED (B9600) 494 #define MBG_CFLAG (CS7|PARENB|CREAD|CLOCAL|HUPCL|CSTOPB) 495 #define MBG_IFLAG (IGNBRK|IGNPAR|ISTRIP) 496 #define MBG_OFLAG 0 497 #define MBG_LFLAG 0 498 #define MBG_FLAGS PARSE_F_PPSONSECOND 499 500 /* 501 * Meinberg DCF77 receivers 502 */ 503 #define DCFUA31_ROOTDELAY 0.0 /* 0 */ 504 #define DCFUA31_BASEDELAY 0.010 /* 10.7421875ms: 10 ms (+/- 3 ms) */ 505 #define DCFUA31_DESCRIPTION "Meinberg DCF77 C51 or compatible" 506 #define DCFUA31_MAXUNSYNC 60*30 /* only trust clock for 1/2 hour */ 507 #define DCFUA31_SPEED MBG_SPEED 508 #define DCFUA31_CFLAG MBG_CFLAG 509 #define DCFUA31_IFLAG MBG_IFLAG 510 #define DCFUA31_OFLAG MBG_OFLAG 511 #define DCFUA31_LFLAG MBG_LFLAG 512 #define DCFUA31_SAMPLES 5 513 #define DCFUA31_KEEP 3 514 #define DCFUA31_FORMAT "Meinberg Standard" 515 516 /* 517 * Meinberg DCF PZF535/TCXO (FM/PZF) receiver 518 */ 519 #define DCFPZF535_ROOTDELAY 0.0 520 #define DCFPZF535_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 521 #define DCFPZF535_DESCRIPTION "Meinberg DCF PZF 535/509 / TCXO" 522 #define DCFPZF535_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours 523 * @ 5e-8df/f we have accumulated 524 * at most 2.16 ms (thus we move to 525 * NTP synchronisation */ 526 #define DCFPZF535_SPEED MBG_SPEED 527 #define DCFPZF535_CFLAG MBG_CFLAG 528 #define DCFPZF535_IFLAG MBG_IFLAG 529 #define DCFPZF535_OFLAG MBG_OFLAG 530 #define DCFPZF535_LFLAG MBG_LFLAG 531 #define DCFPZF535_SAMPLES 5 532 #define DCFPZF535_KEEP 3 533 #define DCFPZF535_FORMAT "Meinberg Standard" 534 535 /* 536 * Meinberg DCF PZF535/OCXO receiver 537 */ 538 #define DCFPZF535OCXO_ROOTDELAY 0.0 539 #define DCFPZF535OCXO_BASEDELAY 0.001968 /* 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 540 #define DCFPZF535OCXO_DESCRIPTION "Meinberg DCF PZF 535/509 / OCXO" 541 #define DCFPZF535OCXO_MAXUNSYNC 60*60*96 /* only trust clock for 4 days 542 * @ 5e-9df/f we have accumulated 543 * at most an error of 1.73 ms 544 * (thus we move to NTP synchronisation) */ 545 #define DCFPZF535OCXO_SPEED MBG_SPEED 546 #define DCFPZF535OCXO_CFLAG MBG_CFLAG 547 #define DCFPZF535OCXO_IFLAG MBG_IFLAG 548 #define DCFPZF535OCXO_OFLAG MBG_OFLAG 549 #define DCFPZF535OCXO_LFLAG MBG_LFLAG 550 #define DCFPZF535OCXO_SAMPLES 5 551 #define DCFPZF535OCXO_KEEP 3 552 #define DCFPZF535OCXO_FORMAT "Meinberg Standard" 553 554 /* 555 * Meinberg GPS receivers 556 */ 557 static void gps16x_message (struct parseunit *, parsetime_t *); 558 static int gps16x_poll_init (struct parseunit *); 559 560 #define GPS16X_ROOTDELAY 0.0 /* nothing here */ 561 #define GPS16X_BASEDELAY 0.001968 /* XXX to be fixed ! 1.968ms +- 104us (oscilloscope) - relative to start (end of STX) */ 562 #define GPS16X_DESCRIPTION "Meinberg GPS receiver" 563 #define GPS16X_MAXUNSYNC 60*60*96 /* only trust clock for 4 days 564 * @ 5e-9df/f we have accumulated 565 * at most an error of 1.73 ms 566 * (thus we move to NTP synchronisation) */ 567 #define GPS16X_SPEED B19200 568 #define GPS16X_CFLAG (CS8|CREAD|CLOCAL|HUPCL) 569 #define GPS16X_IFLAG (IGNBRK|IGNPAR) 570 #define GPS16X_OFLAG MBG_OFLAG 571 #define GPS16X_LFLAG MBG_LFLAG 572 #define GPS16X_POLLRATE 6 573 #define GPS16X_POLLCMD "" 574 #define GPS16X_CMDSIZE 0 575 576 static poll_info_t gps16x_pollinfo = { GPS16X_POLLRATE, GPS16X_POLLCMD, GPS16X_CMDSIZE }; 577 578 #define GPS16X_INIT gps16x_poll_init 579 #define GPS16X_POLL 0 580 #define GPS16X_END 0 581 #define GPS16X_DATA ((void *)(&gps16x_pollinfo)) 582 #define GPS16X_MESSAGE gps16x_message 583 #define GPS16X_ID GPS_ID 584 #define GPS16X_FORMAT "Meinberg GPS Extended" 585 #define GPS16X_SAMPLES 5 586 #define GPS16X_KEEP 3 587 588 /* 589 * ELV DCF7000 Wallclock-Receiver/Switching Clock (Kit) 590 * 591 * This is really not the hottest clock - but before you have nothing ... 592 */ 593 #define DCF7000_ROOTDELAY 0.0 /* 0 */ 594 #define DCF7000_BASEDELAY 0.405 /* slow blow */ 595 #define DCF7000_DESCRIPTION "ELV DCF7000" 596 #define DCF7000_MAXUNSYNC (60*5) /* sorry - but it just was not build as a clock */ 597 #define DCF7000_SPEED (B9600) 598 #define DCF7000_CFLAG (CS8|CREAD|PARENB|PARODD|CLOCAL|HUPCL) 599 #define DCF7000_IFLAG (IGNBRK) 600 #define DCF7000_OFLAG 0 601 #define DCF7000_LFLAG 0 602 #define DCF7000_SAMPLES 5 603 #define DCF7000_KEEP 3 604 #define DCF7000_FORMAT "ELV DCF7000" 605 606 /* 607 * Schmid DCF Receiver Kit 608 * 609 * When the WSDCF clock is operating optimally we want the primary clock 610 * distance to come out at 300 ms. Thus, peer.distance in the WSDCF peer 611 * structure is set to 290 ms and we compute delays which are at least 612 * 10 ms long. The following are 290 ms and 10 ms expressed in u_fp format 613 */ 614 #define WS_POLLRATE 1 /* every second - watch interdependency with poll routine */ 615 #define WS_POLLCMD "\163" 616 #define WS_CMDSIZE 1 617 618 static poll_info_t wsdcf_pollinfo = { WS_POLLRATE, WS_POLLCMD, WS_CMDSIZE }; 619 620 #define WSDCF_INIT poll_init 621 #define WSDCF_POLL poll_dpoll 622 #define WSDCF_END 0 623 #define WSDCF_DATA ((void *)(&wsdcf_pollinfo)) 624 #define WSDCF_ROOTDELAY 0.0 /* 0 */ 625 #define WSDCF_BASEDELAY 0.010 /* ~ 10ms */ 626 #define WSDCF_DESCRIPTION "WS/DCF Receiver" 627 #define WSDCF_FORMAT "Schmid" 628 #define WSDCF_MAXUNSYNC (60*60) /* assume this beast hold at 1 h better than 2 ms XXX-must verify */ 629 #define WSDCF_SPEED (B1200) 630 #define WSDCF_CFLAG (CS8|CREAD|CLOCAL) 631 #define WSDCF_IFLAG 0 632 #define WSDCF_OFLAG 0 633 #define WSDCF_LFLAG 0 634 #define WSDCF_SAMPLES 5 635 #define WSDCF_KEEP 3 636 637 /* 638 * RAW DCF77 - input of DCF marks via RS232 - many variants 639 */ 640 #define RAWDCF_FLAGS 0 641 #define RAWDCF_ROOTDELAY 0.0 /* 0 */ 642 #define RAWDCF_BASEDELAY 0.258 643 #define RAWDCF_FORMAT "RAW DCF77 Timecode" 644 #define RAWDCF_MAXUNSYNC (0) /* sorry - its a true receiver - no signal - no time */ 645 #define RAWDCF_SPEED (B50) 646 #ifdef NO_PARENB_IGNPAR /* Was: defined(SYS_IRIX4) || defined(SYS_IRIX5) */ 647 /* somehow doesn't grok PARENB & IGNPAR (mj) */ 648 # define RAWDCF_CFLAG (CS8|CREAD|CLOCAL) 649 #else 650 # define RAWDCF_CFLAG (CS8|CREAD|CLOCAL|PARENB) 651 #endif 652 #ifdef RAWDCF_NO_IGNPAR /* Was: defined(SYS_LINUX) && defined(CLOCK_RAWDCF) */ 653 # define RAWDCF_IFLAG 0 654 #else 655 # define RAWDCF_IFLAG (IGNPAR) 656 #endif 657 #define RAWDCF_OFLAG 0 658 #define RAWDCF_LFLAG 0 659 #define RAWDCF_SAMPLES 20 660 #define RAWDCF_KEEP 12 661 #define RAWDCF_INIT 0 662 663 /* 664 * RAW DCF variants 665 */ 666 /* 667 * Conrad receiver 668 * 669 * simplest (cheapest) DCF clock - e. g. DCF77 receiver by Conrad 670 * (~40DM - roughly $30 ) followed by a level converter for RS232 671 */ 672 #define CONRAD_BASEDELAY 0.292 /* Conrad receiver @ 50 Baud on a Sun */ 673 #define CONRAD_DESCRIPTION "RAW DCF77 CODE (Conrad DCF77 receiver module)" 674 675 /* Gude Analog- und Digitalsystem GmbH 'Expert mouseCLOCK USB v2.0' */ 676 #define GUDE_EMC_USB_V20_SPEED (B4800) 677 #define GUDE_EMC_USB_V20_BASEDELAY 0.425 /* USB serial<->USB converter FTDI232R */ 678 #define GUDE_EMC_USB_V20_DESCRIPTION "RAW DCF77 CODE (Expert mouseCLOCK USB v2.0)" 679 680 /* 681 * TimeBrick receiver 682 */ 683 #define TIMEBRICK_BASEDELAY 0.210 /* TimeBrick @ 50 Baud on a Sun */ 684 #define TIMEBRICK_DESCRIPTION "RAW DCF77 CODE (TimeBrick)" 685 686 /* 687 * IGEL:clock receiver 688 */ 689 #define IGELCLOCK_BASEDELAY 0.258 /* IGEL:clock receiver */ 690 #define IGELCLOCK_DESCRIPTION "RAW DCF77 CODE (IGEL:clock)" 691 #define IGELCLOCK_SPEED (B1200) 692 #define IGELCLOCK_CFLAG (CS8|CREAD|HUPCL|CLOCAL) 693 694 /* 695 * RAWDCF receivers that need to be powered from DTR 696 * (like Expert mouse clock) 697 */ 698 static int rawdcf_init_1 (struct parseunit *); 699 #define RAWDCFDTRSET_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR)" 700 #define RAWDCFDTRSET75_DESCRIPTION "RAW DCF77 CODE (DTR SET/RTS CLR @ 75 baud)" 701 #define RAWDCFDTRSET_INIT rawdcf_init_1 702 703 /* 704 * RAWDCF receivers that need to be powered from 705 * DTR CLR and RTS SET 706 */ 707 static int rawdcf_init_2 (struct parseunit *); 708 #define RAWDCFDTRCLRRTSSET_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET)" 709 #define RAWDCFDTRCLRRTSSET75_DESCRIPTION "RAW DCF77 CODE (DTR CLR/RTS SET @ 75 baud)" 710 #define RAWDCFDTRCLRRTSSET_INIT rawdcf_init_2 711 712 /* 713 * Trimble GPS receivers (TAIP and TSIP protocols) 714 */ 715 #ifndef TRIM_POLLRATE 716 #define TRIM_POLLRATE 0 /* only true direct polling */ 717 #endif 718 719 #define TRIM_TAIPPOLLCMD ">SRM;FR_FLAG=F;EC_FLAG=F<>QTM<" 720 #define TRIM_TAIPCMDSIZE (sizeof(TRIM_TAIPPOLLCMD)-1) 721 722 static poll_info_t trimbletaip_pollinfo = { TRIM_POLLRATE, TRIM_TAIPPOLLCMD, TRIM_TAIPCMDSIZE }; 723 static int trimbletaip_init (struct parseunit *); 724 static void trimbletaip_event (struct parseunit *, int); 725 726 /* query time & UTC correction data */ 727 static char tsipquery[] = { DLE, 0x21, DLE, ETX, DLE, 0x2F, DLE, ETX }; 728 729 static poll_info_t trimbletsip_pollinfo = { TRIM_POLLRATE, tsipquery, sizeof(tsipquery) }; 730 static int trimbletsip_init (struct parseunit *); 731 static void trimbletsip_end (struct parseunit *); 732 static void trimbletsip_message (struct parseunit *, parsetime_t *); 733 static void trimbletsip_event (struct parseunit *, int); 734 735 #define TRIMBLETSIP_IDLE_TIME (300) /* 5 minutes silence at most */ 736 #define TRIMBLE_RESET_HOLDOFF TRIMBLETSIP_IDLE_TIME 737 738 #define TRIMBLETAIP_SPEED (B4800) 739 #define TRIMBLETAIP_CFLAG (CS8|CREAD|CLOCAL) 740 #define TRIMBLETAIP_IFLAG (BRKINT|IGNPAR|ISTRIP|ICRNL|IXON) 741 #define TRIMBLETAIP_OFLAG (OPOST|ONLCR) 742 #define TRIMBLETAIP_LFLAG (0) 743 744 #define TRIMBLETSIP_SPEED (B9600) 745 #define TRIMBLETSIP_CFLAG (CS8|CLOCAL|CREAD|PARENB|PARODD) 746 #define TRIMBLETSIP_IFLAG (IGNBRK) 747 #define TRIMBLETSIP_OFLAG (0) 748 #define TRIMBLETSIP_LFLAG (ICANON) 749 750 #define TRIMBLETSIP_SAMPLES 5 751 #define TRIMBLETSIP_KEEP 3 752 #define TRIMBLETAIP_SAMPLES 5 753 #define TRIMBLETAIP_KEEP 3 754 755 #define TRIMBLETAIP_FLAGS (PARSE_F_PPSONSECOND) 756 #define TRIMBLETSIP_FLAGS (TRIMBLETAIP_FLAGS) 757 758 #define TRIMBLETAIP_POLL poll_dpoll 759 #define TRIMBLETSIP_POLL poll_dpoll 760 761 #define TRIMBLETAIP_INIT trimbletaip_init 762 #define TRIMBLETSIP_INIT trimbletsip_init 763 764 #define TRIMBLETAIP_EVENT trimbletaip_event 765 766 #define TRIMBLETSIP_EVENT trimbletsip_event 767 #define TRIMBLETSIP_MESSAGE trimbletsip_message 768 769 #define TRIMBLETAIP_END 0 770 #define TRIMBLETSIP_END trimbletsip_end 771 772 #define TRIMBLETAIP_DATA ((void *)(&trimbletaip_pollinfo)) 773 #define TRIMBLETSIP_DATA ((void *)(&trimbletsip_pollinfo)) 774 775 #define TRIMBLETAIP_ID GPS_ID 776 #define TRIMBLETSIP_ID GPS_ID 777 778 #define TRIMBLETAIP_FORMAT "Trimble TAIP" 779 #define TRIMBLETSIP_FORMAT "Trimble TSIP" 780 781 #define TRIMBLETAIP_ROOTDELAY 0x0 782 #define TRIMBLETSIP_ROOTDELAY 0x0 783 784 #define TRIMBLETAIP_BASEDELAY 0.0 785 #define TRIMBLETSIP_BASEDELAY 0.020 /* GPS time message latency */ 786 787 #define TRIMBLETAIP_DESCRIPTION "Trimble GPS (TAIP) receiver" 788 #define TRIMBLETSIP_DESCRIPTION "Trimble GPS (TSIP) receiver" 789 790 #define TRIMBLETAIP_MAXUNSYNC 0 791 #define TRIMBLETSIP_MAXUNSYNC 0 792 793 #define TRIMBLETAIP_EOL '<' 794 795 /* 796 * RadioCode Clocks RCC 800 receiver 797 */ 798 #define RCC_POLLRATE 0 /* only true direct polling */ 799 #define RCC_POLLCMD "\r" 800 #define RCC_CMDSIZE 1 801 802 static poll_info_t rcc8000_pollinfo = { RCC_POLLRATE, RCC_POLLCMD, RCC_CMDSIZE }; 803 #define RCC8000_FLAGS 0 804 #define RCC8000_POLL poll_dpoll 805 #define RCC8000_INIT poll_init 806 #define RCC8000_END 0 807 #define RCC8000_DATA ((void *)(&rcc8000_pollinfo)) 808 #define RCC8000_ROOTDELAY 0.0 809 #define RCC8000_BASEDELAY 0.0 810 #define RCC8000_ID "MSF" 811 #define RCC8000_DESCRIPTION "RCC 8000 MSF Receiver" 812 #define RCC8000_FORMAT "Radiocode RCC8000" 813 #define RCC8000_MAXUNSYNC (60*60) /* should be ok for an hour */ 814 #define RCC8000_SPEED (B2400) 815 #define RCC8000_CFLAG (CS8|CREAD|CLOCAL) 816 #define RCC8000_IFLAG (IGNBRK|IGNPAR) 817 #define RCC8000_OFLAG 0 818 #define RCC8000_LFLAG 0 819 #define RCC8000_SAMPLES 5 820 #define RCC8000_KEEP 3 821 822 /* 823 * Hopf Radio clock 6021 Format 824 * 825 */ 826 #define HOPF6021_ROOTDELAY 0.0 827 #define HOPF6021_BASEDELAY 0.0 828 #define HOPF6021_DESCRIPTION "HOPF 6021" 829 #define HOPF6021_FORMAT "hopf Funkuhr 6021" 830 #define HOPF6021_MAXUNSYNC (60*60) /* should be ok for an hour */ 831 #define HOPF6021_SPEED (B9600) 832 #define HOPF6021_CFLAG (CS8|CREAD|CLOCAL) 833 #define HOPF6021_IFLAG (IGNBRK|ISTRIP) 834 #define HOPF6021_OFLAG 0 835 #define HOPF6021_LFLAG 0 836 #define HOPF6021_FLAGS 0 837 #define HOPF6021_SAMPLES 5 838 #define HOPF6021_KEEP 3 839 840 /* 841 * Diem's Computime Radio Clock Receiver 842 */ 843 #define COMPUTIME_FLAGS 0 844 #define COMPUTIME_ROOTDELAY 0.0 845 #define COMPUTIME_BASEDELAY 0.0 846 #define COMPUTIME_ID DCF_ID 847 #define COMPUTIME_DESCRIPTION "Diem's Computime receiver" 848 #define COMPUTIME_FORMAT "Diem's Computime Radio Clock" 849 #define COMPUTIME_TYPE DCF_TYPE 850 #define COMPUTIME_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ 851 #define COMPUTIME_SPEED (B9600) 852 #define COMPUTIME_CFLAG (CSTOPB|CS7|CREAD|CLOCAL) 853 #define COMPUTIME_IFLAG (IGNBRK|IGNPAR|ISTRIP) 854 #define COMPUTIME_OFLAG 0 855 #define COMPUTIME_LFLAG 0 856 #define COMPUTIME_SAMPLES 5 857 #define COMPUTIME_KEEP 3 858 859 /* 860 * Varitext Radio Clock Receiver 861 */ 862 #define VARITEXT_FLAGS 0 863 #define VARITEXT_ROOTDELAY 0.0 864 #define VARITEXT_BASEDELAY 0.0 865 #define VARITEXT_ID "MSF" 866 #define VARITEXT_DESCRIPTION "Varitext receiver" 867 #define VARITEXT_FORMAT "Varitext Radio Clock" 868 #define VARITEXT_TYPE DCF_TYPE 869 #define VARITEXT_MAXUNSYNC (60*60) /* only trust clock for 1 hour */ 870 #define VARITEXT_SPEED (B9600) 871 #define VARITEXT_CFLAG (CS7|CREAD|CLOCAL|PARENB|PARODD) 872 #define VARITEXT_IFLAG (IGNPAR|IGNBRK|INPCK) /*|ISTRIP)*/ 873 #define VARITEXT_OFLAG 0 874 #define VARITEXT_LFLAG 0 875 #define VARITEXT_SAMPLES 32 876 #define VARITEXT_KEEP 20 877 878 /* 879 * SEL240x Satellite Sychronized Clock 880 */ 881 #define SEL240X_POLLRATE 0 /* only true direct polling */ 882 #define SEL240X_POLLCMD "BUB8" 883 #define SEL240X_CMDSIZE 4 884 885 static poll_info_t sel240x_pollinfo = { SEL240X_POLLRATE, 886 SEL240X_POLLCMD, 887 SEL240X_CMDSIZE }; 888 #define SEL240X_FLAGS (PARSE_F_PPSONSECOND) 889 #define SEL240X_POLL poll_dpoll 890 #define SEL240X_INIT poll_init 891 #define SEL240X_END 0 892 #define SEL240X_DATA ((void *)(&sel240x_pollinfo)) 893 #define SEL240X_ROOTDELAY 0.0 894 #define SEL240X_BASEDELAY 0.0 895 #define SEL240X_ID GPS_ID 896 #define SEL240X_DESCRIPTION "SEL240x Satellite Synchronized Clock" 897 #define SEL240X_FORMAT "SEL B8" 898 #define SEL240X_MAXUNSYNC 60*60*12 /* only trust clock for 12 hours */ 899 #define SEL240X_SPEED (B9600) 900 #define SEL240X_CFLAG (CS8|CREAD|CLOCAL) 901 #define SEL240X_IFLAG (IGNBRK|IGNPAR) 902 #define SEL240X_OFLAG (0) 903 #define SEL240X_LFLAG (0) 904 #define SEL240X_SAMPLES 5 905 #define SEL240X_KEEP 3 906 907 static struct parse_clockinfo 908 { 909 u_long cl_flags; /* operation flags (PPS interpretation, trust handling) */ 910 void (*cl_poll) (struct parseunit *); /* active poll routine */ 911 int (*cl_init) (struct parseunit *); /* active poll init routine */ 912 void (*cl_event) (struct parseunit *, int); /* special event handling (e.g. reset clock) */ 913 void (*cl_end) (struct parseunit *); /* active poll end routine */ 914 void (*cl_message) (struct parseunit *, parsetime_t *); /* process a lower layer message */ 915 void *cl_data; /* local data area for "poll" mechanism */ 916 double cl_rootdelay; /* rootdelay */ 917 double cl_basedelay; /* current offset by which the RS232 918 time code is delayed from the actual time */ 919 const char *cl_id; /* ID code */ 920 const char *cl_description; /* device name */ 921 const char *cl_format; /* fixed format */ 922 u_char cl_type; /* clock type (ntp control) */ 923 u_long cl_maxunsync; /* time to trust oscillator after losing synch */ 924 u_long cl_speed; /* terminal input & output baudrate */ 925 u_long cl_cflag; /* terminal control flags */ 926 u_long cl_iflag; /* terminal input flags */ 927 u_long cl_oflag; /* terminal output flags */ 928 u_long cl_lflag; /* terminal local flags */ 929 u_long cl_samples; /* samples for median filter */ 930 u_long cl_keep; /* samples for median filter to keep */ 931 } parse_clockinfo[] = 932 { 933 { /* mode 0 */ 934 MBG_FLAGS, 935 NO_POLL, 936 NO_INIT, 937 NO_EVENT, 938 NO_END, 939 NO_MESSAGE, 940 NO_LCLDATA, 941 DCFPZF535_ROOTDELAY, 942 DCFPZF535_BASEDELAY, 943 DCF_P_ID, 944 DCFPZF535_DESCRIPTION, 945 DCFPZF535_FORMAT, 946 DCF_TYPE, 947 DCFPZF535_MAXUNSYNC, 948 DCFPZF535_SPEED, 949 DCFPZF535_CFLAG, 950 DCFPZF535_IFLAG, 951 DCFPZF535_OFLAG, 952 DCFPZF535_LFLAG, 953 DCFPZF535_SAMPLES, 954 DCFPZF535_KEEP 955 }, 956 { /* mode 1 */ 957 MBG_FLAGS, 958 NO_POLL, 959 NO_INIT, 960 NO_EVENT, 961 NO_END, 962 NO_MESSAGE, 963 NO_LCLDATA, 964 DCFPZF535OCXO_ROOTDELAY, 965 DCFPZF535OCXO_BASEDELAY, 966 DCF_P_ID, 967 DCFPZF535OCXO_DESCRIPTION, 968 DCFPZF535OCXO_FORMAT, 969 DCF_TYPE, 970 DCFPZF535OCXO_MAXUNSYNC, 971 DCFPZF535OCXO_SPEED, 972 DCFPZF535OCXO_CFLAG, 973 DCFPZF535OCXO_IFLAG, 974 DCFPZF535OCXO_OFLAG, 975 DCFPZF535OCXO_LFLAG, 976 DCFPZF535OCXO_SAMPLES, 977 DCFPZF535OCXO_KEEP 978 }, 979 { /* mode 2 */ 980 MBG_FLAGS, 981 NO_POLL, 982 NO_INIT, 983 NO_EVENT, 984 NO_END, 985 NO_MESSAGE, 986 NO_LCLDATA, 987 DCFUA31_ROOTDELAY, 988 DCFUA31_BASEDELAY, 989 DCF_A_ID, 990 DCFUA31_DESCRIPTION, 991 DCFUA31_FORMAT, 992 DCF_TYPE, 993 DCFUA31_MAXUNSYNC, 994 DCFUA31_SPEED, 995 DCFUA31_CFLAG, 996 DCFUA31_IFLAG, 997 DCFUA31_OFLAG, 998 DCFUA31_LFLAG, 999 DCFUA31_SAMPLES, 1000 DCFUA31_KEEP 1001 }, 1002 { /* mode 3 */ 1003 MBG_FLAGS, 1004 NO_POLL, 1005 NO_INIT, 1006 NO_EVENT, 1007 NO_END, 1008 NO_MESSAGE, 1009 NO_LCLDATA, 1010 DCF7000_ROOTDELAY, 1011 DCF7000_BASEDELAY, 1012 DCF_A_ID, 1013 DCF7000_DESCRIPTION, 1014 DCF7000_FORMAT, 1015 DCF_TYPE, 1016 DCF7000_MAXUNSYNC, 1017 DCF7000_SPEED, 1018 DCF7000_CFLAG, 1019 DCF7000_IFLAG, 1020 DCF7000_OFLAG, 1021 DCF7000_LFLAG, 1022 DCF7000_SAMPLES, 1023 DCF7000_KEEP 1024 }, 1025 { /* mode 4 */ 1026 NO_CL_FLAGS, 1027 WSDCF_POLL, 1028 WSDCF_INIT, 1029 NO_EVENT, 1030 WSDCF_END, 1031 NO_MESSAGE, 1032 WSDCF_DATA, 1033 WSDCF_ROOTDELAY, 1034 WSDCF_BASEDELAY, 1035 DCF_A_ID, 1036 WSDCF_DESCRIPTION, 1037 WSDCF_FORMAT, 1038 DCF_TYPE, 1039 WSDCF_MAXUNSYNC, 1040 WSDCF_SPEED, 1041 WSDCF_CFLAG, 1042 WSDCF_IFLAG, 1043 WSDCF_OFLAG, 1044 WSDCF_LFLAG, 1045 WSDCF_SAMPLES, 1046 WSDCF_KEEP 1047 }, 1048 { /* mode 5 */ 1049 RAWDCF_FLAGS, 1050 NO_POLL, 1051 RAWDCF_INIT, 1052 NO_EVENT, 1053 NO_END, 1054 NO_MESSAGE, 1055 NO_LCLDATA, 1056 RAWDCF_ROOTDELAY, 1057 CONRAD_BASEDELAY, 1058 DCF_A_ID, 1059 CONRAD_DESCRIPTION, 1060 RAWDCF_FORMAT, 1061 DCF_TYPE, 1062 RAWDCF_MAXUNSYNC, 1063 RAWDCF_SPEED, 1064 RAWDCF_CFLAG, 1065 RAWDCF_IFLAG, 1066 RAWDCF_OFLAG, 1067 RAWDCF_LFLAG, 1068 RAWDCF_SAMPLES, 1069 RAWDCF_KEEP 1070 }, 1071 { /* mode 6 */ 1072 RAWDCF_FLAGS, 1073 NO_POLL, 1074 RAWDCF_INIT, 1075 NO_EVENT, 1076 NO_END, 1077 NO_MESSAGE, 1078 NO_LCLDATA, 1079 RAWDCF_ROOTDELAY, 1080 TIMEBRICK_BASEDELAY, 1081 DCF_A_ID, 1082 TIMEBRICK_DESCRIPTION, 1083 RAWDCF_FORMAT, 1084 DCF_TYPE, 1085 RAWDCF_MAXUNSYNC, 1086 RAWDCF_SPEED, 1087 RAWDCF_CFLAG, 1088 RAWDCF_IFLAG, 1089 RAWDCF_OFLAG, 1090 RAWDCF_LFLAG, 1091 RAWDCF_SAMPLES, 1092 RAWDCF_KEEP 1093 }, 1094 { /* mode 7 */ 1095 MBG_FLAGS, 1096 GPS16X_POLL, 1097 GPS16X_INIT, 1098 NO_EVENT, 1099 GPS16X_END, 1100 GPS16X_MESSAGE, 1101 GPS16X_DATA, 1102 GPS16X_ROOTDELAY, 1103 GPS16X_BASEDELAY, 1104 GPS16X_ID, 1105 GPS16X_DESCRIPTION, 1106 GPS16X_FORMAT, 1107 GPS_TYPE, 1108 GPS16X_MAXUNSYNC, 1109 GPS16X_SPEED, 1110 GPS16X_CFLAG, 1111 GPS16X_IFLAG, 1112 GPS16X_OFLAG, 1113 GPS16X_LFLAG, 1114 GPS16X_SAMPLES, 1115 GPS16X_KEEP 1116 }, 1117 { /* mode 8 */ 1118 RAWDCF_FLAGS, 1119 NO_POLL, 1120 NO_INIT, 1121 NO_EVENT, 1122 NO_END, 1123 NO_MESSAGE, 1124 NO_LCLDATA, 1125 RAWDCF_ROOTDELAY, 1126 IGELCLOCK_BASEDELAY, 1127 DCF_A_ID, 1128 IGELCLOCK_DESCRIPTION, 1129 RAWDCF_FORMAT, 1130 DCF_TYPE, 1131 RAWDCF_MAXUNSYNC, 1132 IGELCLOCK_SPEED, 1133 IGELCLOCK_CFLAG, 1134 RAWDCF_IFLAG, 1135 RAWDCF_OFLAG, 1136 RAWDCF_LFLAG, 1137 RAWDCF_SAMPLES, 1138 RAWDCF_KEEP 1139 }, 1140 { /* mode 9 */ 1141 TRIMBLETAIP_FLAGS, 1142 #if TRIM_POLLRATE /* DHD940515: Allow user config */ 1143 NO_POLL, 1144 #else 1145 TRIMBLETAIP_POLL, 1146 #endif 1147 TRIMBLETAIP_INIT, 1148 TRIMBLETAIP_EVENT, 1149 TRIMBLETAIP_END, 1150 NO_MESSAGE, 1151 TRIMBLETAIP_DATA, 1152 TRIMBLETAIP_ROOTDELAY, 1153 TRIMBLETAIP_BASEDELAY, 1154 TRIMBLETAIP_ID, 1155 TRIMBLETAIP_DESCRIPTION, 1156 TRIMBLETAIP_FORMAT, 1157 GPS_TYPE, 1158 TRIMBLETAIP_MAXUNSYNC, 1159 TRIMBLETAIP_SPEED, 1160 TRIMBLETAIP_CFLAG, 1161 TRIMBLETAIP_IFLAG, 1162 TRIMBLETAIP_OFLAG, 1163 TRIMBLETAIP_LFLAG, 1164 TRIMBLETAIP_SAMPLES, 1165 TRIMBLETAIP_KEEP 1166 }, 1167 { /* mode 10 */ 1168 TRIMBLETSIP_FLAGS, 1169 #if TRIM_POLLRATE /* DHD940515: Allow user config */ 1170 NO_POLL, 1171 #else 1172 TRIMBLETSIP_POLL, 1173 #endif 1174 TRIMBLETSIP_INIT, 1175 TRIMBLETSIP_EVENT, 1176 TRIMBLETSIP_END, 1177 TRIMBLETSIP_MESSAGE, 1178 TRIMBLETSIP_DATA, 1179 TRIMBLETSIP_ROOTDELAY, 1180 TRIMBLETSIP_BASEDELAY, 1181 TRIMBLETSIP_ID, 1182 TRIMBLETSIP_DESCRIPTION, 1183 TRIMBLETSIP_FORMAT, 1184 GPS_TYPE, 1185 TRIMBLETSIP_MAXUNSYNC, 1186 TRIMBLETSIP_SPEED, 1187 TRIMBLETSIP_CFLAG, 1188 TRIMBLETSIP_IFLAG, 1189 TRIMBLETSIP_OFLAG, 1190 TRIMBLETSIP_LFLAG, 1191 TRIMBLETSIP_SAMPLES, 1192 TRIMBLETSIP_KEEP 1193 }, 1194 { /* mode 11 */ 1195 NO_CL_FLAGS, 1196 RCC8000_POLL, 1197 RCC8000_INIT, 1198 NO_EVENT, 1199 RCC8000_END, 1200 NO_MESSAGE, 1201 RCC8000_DATA, 1202 RCC8000_ROOTDELAY, 1203 RCC8000_BASEDELAY, 1204 RCC8000_ID, 1205 RCC8000_DESCRIPTION, 1206 RCC8000_FORMAT, 1207 DCF_TYPE, 1208 RCC8000_MAXUNSYNC, 1209 RCC8000_SPEED, 1210 RCC8000_CFLAG, 1211 RCC8000_IFLAG, 1212 RCC8000_OFLAG, 1213 RCC8000_LFLAG, 1214 RCC8000_SAMPLES, 1215 RCC8000_KEEP 1216 }, 1217 { /* mode 12 */ 1218 HOPF6021_FLAGS, 1219 NO_POLL, 1220 NO_INIT, 1221 NO_EVENT, 1222 NO_END, 1223 NO_MESSAGE, 1224 NO_LCLDATA, 1225 HOPF6021_ROOTDELAY, 1226 HOPF6021_BASEDELAY, 1227 DCF_ID, 1228 HOPF6021_DESCRIPTION, 1229 HOPF6021_FORMAT, 1230 DCF_TYPE, 1231 HOPF6021_MAXUNSYNC, 1232 HOPF6021_SPEED, 1233 HOPF6021_CFLAG, 1234 HOPF6021_IFLAG, 1235 HOPF6021_OFLAG, 1236 HOPF6021_LFLAG, 1237 HOPF6021_SAMPLES, 1238 HOPF6021_KEEP 1239 }, 1240 { /* mode 13 */ 1241 COMPUTIME_FLAGS, 1242 NO_POLL, 1243 NO_INIT, 1244 NO_EVENT, 1245 NO_END, 1246 NO_MESSAGE, 1247 NO_LCLDATA, 1248 COMPUTIME_ROOTDELAY, 1249 COMPUTIME_BASEDELAY, 1250 COMPUTIME_ID, 1251 COMPUTIME_DESCRIPTION, 1252 COMPUTIME_FORMAT, 1253 COMPUTIME_TYPE, 1254 COMPUTIME_MAXUNSYNC, 1255 COMPUTIME_SPEED, 1256 COMPUTIME_CFLAG, 1257 COMPUTIME_IFLAG, 1258 COMPUTIME_OFLAG, 1259 COMPUTIME_LFLAG, 1260 COMPUTIME_SAMPLES, 1261 COMPUTIME_KEEP 1262 }, 1263 { /* mode 14 */ 1264 RAWDCF_FLAGS, 1265 NO_POLL, 1266 RAWDCFDTRSET_INIT, 1267 NO_EVENT, 1268 NO_END, 1269 NO_MESSAGE, 1270 NO_LCLDATA, 1271 RAWDCF_ROOTDELAY, 1272 RAWDCF_BASEDELAY, 1273 DCF_A_ID, 1274 RAWDCFDTRSET_DESCRIPTION, 1275 RAWDCF_FORMAT, 1276 DCF_TYPE, 1277 RAWDCF_MAXUNSYNC, 1278 RAWDCF_SPEED, 1279 RAWDCF_CFLAG, 1280 RAWDCF_IFLAG, 1281 RAWDCF_OFLAG, 1282 RAWDCF_LFLAG, 1283 RAWDCF_SAMPLES, 1284 RAWDCF_KEEP 1285 }, 1286 { /* mode 15 */ 1287 0, /* operation flags (io modes) */ 1288 NO_POLL, /* active poll routine */ 1289 NO_INIT, /* active poll init routine */ 1290 NO_EVENT, /* special event handling (e.g. reset clock) */ 1291 NO_END, /* active poll end routine */ 1292 NO_MESSAGE, /* process a lower layer message */ 1293 NO_LCLDATA, /* local data area for "poll" mechanism */ 1294 0, /* rootdelay */ 1295 11.0 /* bits */ / 9600, /* current offset by which the RS232 1296 time code is delayed from the actual time */ 1297 DCF_ID, /* ID code */ 1298 "WHARTON 400A Series clock", /* device name */ 1299 "WHARTON 400A Series clock Output Format 1", /* fixed format */ 1300 /* Must match a format-name in a libparse/clk_xxx.c file */ 1301 DCF_TYPE, /* clock type (ntp control) */ 1302 (1*60*60), /* time to trust oscillator after losing synch */ 1303 B9600, /* terminal input & output baudrate */ 1304 (CS8|CREAD|PARENB|CLOCAL|HUPCL),/* terminal control flags */ 1305 0, /* terminal input flags */ 1306 0, /* terminal output flags */ 1307 0, /* terminal local flags */ 1308 5, /* samples for median filter */ 1309 3, /* samples for median filter to keep */ 1310 }, 1311 { /* mode 16 - RAWDCF RTS set, DTR clr */ 1312 RAWDCF_FLAGS, 1313 NO_POLL, 1314 RAWDCFDTRCLRRTSSET_INIT, 1315 NO_EVENT, 1316 NO_END, 1317 NO_MESSAGE, 1318 NO_LCLDATA, 1319 RAWDCF_ROOTDELAY, 1320 RAWDCF_BASEDELAY, 1321 DCF_A_ID, 1322 RAWDCFDTRCLRRTSSET_DESCRIPTION, 1323 RAWDCF_FORMAT, 1324 DCF_TYPE, 1325 RAWDCF_MAXUNSYNC, 1326 RAWDCF_SPEED, 1327 RAWDCF_CFLAG, 1328 RAWDCF_IFLAG, 1329 RAWDCF_OFLAG, 1330 RAWDCF_LFLAG, 1331 RAWDCF_SAMPLES, 1332 RAWDCF_KEEP 1333 }, 1334 { /* mode 17 */ 1335 VARITEXT_FLAGS, 1336 NO_POLL, 1337 NO_INIT, 1338 NO_EVENT, 1339 NO_END, 1340 NO_MESSAGE, 1341 NO_LCLDATA, 1342 VARITEXT_ROOTDELAY, 1343 VARITEXT_BASEDELAY, 1344 VARITEXT_ID, 1345 VARITEXT_DESCRIPTION, 1346 VARITEXT_FORMAT, 1347 VARITEXT_TYPE, 1348 VARITEXT_MAXUNSYNC, 1349 VARITEXT_SPEED, 1350 VARITEXT_CFLAG, 1351 VARITEXT_IFLAG, 1352 VARITEXT_OFLAG, 1353 VARITEXT_LFLAG, 1354 VARITEXT_SAMPLES, 1355 VARITEXT_KEEP 1356 }, 1357 { /* mode 18 */ 1358 MBG_FLAGS, 1359 NO_POLL, 1360 NO_INIT, 1361 NO_EVENT, 1362 GPS16X_END, 1363 GPS16X_MESSAGE, 1364 GPS16X_DATA, 1365 GPS16X_ROOTDELAY, 1366 GPS16X_BASEDELAY, 1367 GPS16X_ID, 1368 GPS16X_DESCRIPTION, 1369 GPS16X_FORMAT, 1370 GPS_TYPE, 1371 GPS16X_MAXUNSYNC, 1372 GPS16X_SPEED, 1373 GPS16X_CFLAG, 1374 GPS16X_IFLAG, 1375 GPS16X_OFLAG, 1376 GPS16X_LFLAG, 1377 GPS16X_SAMPLES, 1378 GPS16X_KEEP 1379 }, 1380 { /* mode 19 */ 1381 RAWDCF_FLAGS, 1382 NO_POLL, 1383 RAWDCF_INIT, 1384 NO_EVENT, 1385 NO_END, 1386 NO_MESSAGE, 1387 NO_LCLDATA, 1388 RAWDCF_ROOTDELAY, 1389 GUDE_EMC_USB_V20_BASEDELAY, 1390 DCF_A_ID, 1391 GUDE_EMC_USB_V20_DESCRIPTION, 1392 RAWDCF_FORMAT, 1393 DCF_TYPE, 1394 RAWDCF_MAXUNSYNC, 1395 GUDE_EMC_USB_V20_SPEED, 1396 RAWDCF_CFLAG, 1397 RAWDCF_IFLAG, 1398 RAWDCF_OFLAG, 1399 RAWDCF_LFLAG, 1400 RAWDCF_SAMPLES, 1401 RAWDCF_KEEP 1402 }, 1403 { /* mode 20, like mode 14 but driven by 75 baud */ 1404 RAWDCF_FLAGS, 1405 NO_POLL, 1406 RAWDCFDTRSET_INIT, 1407 NO_EVENT, 1408 NO_END, 1409 NO_MESSAGE, 1410 NO_LCLDATA, 1411 RAWDCF_ROOTDELAY, 1412 RAWDCF_BASEDELAY, 1413 DCF_A_ID, 1414 RAWDCFDTRSET75_DESCRIPTION, 1415 RAWDCF_FORMAT, 1416 DCF_TYPE, 1417 RAWDCF_MAXUNSYNC, 1418 B75, 1419 RAWDCF_CFLAG, 1420 RAWDCF_IFLAG, 1421 RAWDCF_OFLAG, 1422 RAWDCF_LFLAG, 1423 RAWDCF_SAMPLES, 1424 RAWDCF_KEEP 1425 }, 1426 { /* mode 21, like mode 16 but driven by 75 baud 1427 - RAWDCF RTS set, DTR clr */ 1428 RAWDCF_FLAGS, 1429 NO_POLL, 1430 RAWDCFDTRCLRRTSSET_INIT, 1431 NO_EVENT, 1432 NO_END, 1433 NO_MESSAGE, 1434 NO_LCLDATA, 1435 RAWDCF_ROOTDELAY, 1436 RAWDCF_BASEDELAY, 1437 DCF_A_ID, 1438 RAWDCFDTRCLRRTSSET75_DESCRIPTION, 1439 RAWDCF_FORMAT, 1440 DCF_TYPE, 1441 RAWDCF_MAXUNSYNC, 1442 B75, 1443 RAWDCF_CFLAG, 1444 RAWDCF_IFLAG, 1445 RAWDCF_OFLAG, 1446 RAWDCF_LFLAG, 1447 RAWDCF_SAMPLES, 1448 RAWDCF_KEEP 1449 }, 1450 { /* mode 22 - like 2 with POWERUP trust */ 1451 MBG_FLAGS | PARSE_F_POWERUPTRUST, 1452 NO_POLL, 1453 NO_INIT, 1454 NO_EVENT, 1455 NO_END, 1456 NO_MESSAGE, 1457 NO_LCLDATA, 1458 DCFUA31_ROOTDELAY, 1459 DCFUA31_BASEDELAY, 1460 DCF_A_ID, 1461 DCFUA31_DESCRIPTION, 1462 DCFUA31_FORMAT, 1463 DCF_TYPE, 1464 DCFUA31_MAXUNSYNC, 1465 DCFUA31_SPEED, 1466 DCFUA31_CFLAG, 1467 DCFUA31_IFLAG, 1468 DCFUA31_OFLAG, 1469 DCFUA31_LFLAG, 1470 DCFUA31_SAMPLES, 1471 DCFUA31_KEEP 1472 }, 1473 { /* mode 23 - like 7 with POWERUP trust */ 1474 MBG_FLAGS | PARSE_F_POWERUPTRUST, 1475 GPS16X_POLL, 1476 GPS16X_INIT, 1477 NO_EVENT, 1478 GPS16X_END, 1479 GPS16X_MESSAGE, 1480 GPS16X_DATA, 1481 GPS16X_ROOTDELAY, 1482 GPS16X_BASEDELAY, 1483 GPS16X_ID, 1484 GPS16X_DESCRIPTION, 1485 GPS16X_FORMAT, 1486 GPS_TYPE, 1487 GPS16X_MAXUNSYNC, 1488 GPS16X_SPEED, 1489 GPS16X_CFLAG, 1490 GPS16X_IFLAG, 1491 GPS16X_OFLAG, 1492 GPS16X_LFLAG, 1493 GPS16X_SAMPLES, 1494 GPS16X_KEEP 1495 }, 1496 { /* mode 24 */ 1497 SEL240X_FLAGS, 1498 SEL240X_POLL, 1499 SEL240X_INIT, 1500 NO_EVENT, 1501 SEL240X_END, 1502 NO_MESSAGE, 1503 SEL240X_DATA, 1504 SEL240X_ROOTDELAY, 1505 SEL240X_BASEDELAY, 1506 SEL240X_ID, 1507 SEL240X_DESCRIPTION, 1508 SEL240X_FORMAT, 1509 GPS_TYPE, 1510 SEL240X_MAXUNSYNC, 1511 SEL240X_SPEED, 1512 SEL240X_CFLAG, 1513 SEL240X_IFLAG, 1514 SEL240X_OFLAG, 1515 SEL240X_LFLAG, 1516 SEL240X_SAMPLES, 1517 SEL240X_KEEP 1518 }, 1519 }; 1520 1521 static int ncltypes = sizeof(parse_clockinfo) / sizeof(struct parse_clockinfo); 1522 1523 #define CLK_REALTYPE(x) ((int)(((x)->ttl) & 0x7F)) 1524 #define CLK_TYPE(x) ((CLK_REALTYPE(x) >= ncltypes) ? ~0 : CLK_REALTYPE(x)) 1525 #define CLK_UNIT(x) ((int)REFCLOCKUNIT(&(x)->srcadr)) 1526 #define CLK_PPS(x) (((x)->ttl) & 0x80) 1527 1528 /* 1529 * Other constant stuff 1530 */ 1531 #define PARSEHSREFID 0x7f7f08ff /* 127.127.8.255 refid for hi strata */ 1532 1533 #define PARSESTATISTICS (60*60) /* output state statistics every hour */ 1534 1535 static int notice = 0; 1536 1537 #define PARSE_STATETIME(parse, i) ((parse->generic->currentstatus == i) ? parse->statetime[i] + current_time - parse->lastchange : parse->statetime[i]) 1538 1539 static void parse_event (struct parseunit *, int); 1540 static void parse_process (struct parseunit *, parsetime_t *); 1541 static void clear_err (struct parseunit *, u_long); 1542 static int list_err (struct parseunit *, u_long); 1543 static char * l_mktime (u_long); 1544 1545 /**=========================================================================== 1546 ** implementation error message regression module 1547 **/ 1548 static void 1549 clear_err( 1550 struct parseunit *parse, 1551 u_long lstate 1552 ) 1553 { 1554 if (lstate == ERR_ALL) 1555 { 1556 size_t i; 1557 1558 for (i = 0; i < ERR_CNT; i++) 1559 { 1560 parse->errors[i].err_stage = err_tbl[i]; 1561 parse->errors[i].err_cnt = 0; 1562 parse->errors[i].err_last = 0; 1563 parse->errors[i].err_started = 0; 1564 parse->errors[i].err_suppressed = 0; 1565 } 1566 } 1567 else 1568 { 1569 parse->errors[lstate].err_stage = err_tbl[lstate]; 1570 parse->errors[lstate].err_cnt = 0; 1571 parse->errors[lstate].err_last = 0; 1572 parse->errors[lstate].err_started = 0; 1573 parse->errors[lstate].err_suppressed = 0; 1574 } 1575 } 1576 1577 static int 1578 list_err( 1579 struct parseunit *parse, 1580 u_long lstate 1581 ) 1582 { 1583 int do_it; 1584 struct errorinfo *err = &parse->errors[lstate]; 1585 1586 if (err->err_started == 0) 1587 { 1588 err->err_started = current_time; 1589 } 1590 1591 do_it = (current_time - err->err_last) >= err->err_stage->err_delay; 1592 1593 if (do_it) 1594 err->err_cnt++; 1595 1596 if (err->err_stage->err_count && 1597 (err->err_cnt >= err->err_stage->err_count)) 1598 { 1599 err->err_stage++; 1600 err->err_cnt = 0; 1601 } 1602 1603 if (!err->err_cnt && do_it) 1604 msyslog(LOG_INFO, "PARSE receiver #%d: interval for following error message class is at least %s", 1605 CLK_UNIT(parse->peer), l_mktime(err->err_stage->err_delay)); 1606 1607 if (!do_it) 1608 err->err_suppressed++; 1609 else 1610 err->err_last = current_time; 1611 1612 if (do_it && err->err_suppressed) 1613 { 1614 msyslog(LOG_INFO, "PARSE receiver #%d: %ld message%s suppressed, error condition class persists for %s", 1615 CLK_UNIT(parse->peer), err->err_suppressed, (err->err_suppressed == 1) ? " was" : "s where", 1616 l_mktime(current_time - err->err_started)); 1617 err->err_suppressed = 0; 1618 } 1619 1620 return do_it; 1621 } 1622 1623 /*-------------------------------------------------- 1624 * mkreadable - make a printable ascii string (without 1625 * embedded quotes so that the ntpq protocol isn't 1626 * fooled 1627 */ 1628 #ifndef isprint 1629 #define isprint(_X_) (((_X_) > 0x1F) && ((_X_) < 0x7F)) 1630 #endif 1631 1632 static char * 1633 mkreadable( 1634 char *buffer, 1635 size_t blen, 1636 const char *src, 1637 size_t srclen, 1638 int hex 1639 ) 1640 { 1641 static const char ellipsis[] = "..."; 1642 char *b = buffer; 1643 char *endb = NULL; 1644 1645 if (blen < 4) 1646 return NULL; /* don't bother with mini buffers */ 1647 1648 endb = buffer + blen - sizeof(ellipsis); 1649 1650 blen--; /* account for '\0' */ 1651 1652 while (blen && srclen--) 1653 { 1654 if (!hex && /* no binary only */ 1655 (*src != '\\') && /* no plain \ */ 1656 (*src != '"') && /* no " */ 1657 isprint((unsigned char)*src)) /* only printables */ 1658 { /* they are easy... */ 1659 *buffer++ = *src++; 1660 blen--; 1661 } 1662 else 1663 { 1664 if (blen < 4) 1665 { 1666 while (blen--) 1667 { 1668 *buffer++ = '.'; 1669 } 1670 *buffer = '\0'; 1671 return b; 1672 } 1673 else 1674 { 1675 if (*src == '\\') 1676 { 1677 memcpy(buffer, "\\\\", 2); 1678 buffer += 2; 1679 blen -= 2; 1680 src++; 1681 } 1682 else 1683 { 1684 snprintf(buffer, blen, "\\x%02x", *src++); 1685 blen -= 4; 1686 buffer += 4; 1687 } 1688 } 1689 } 1690 if (srclen && !blen && endb) /* overflow - set last chars to ... */ 1691 memcpy(endb, ellipsis, sizeof(ellipsis)); 1692 } 1693 1694 *buffer = '\0'; 1695 return b; 1696 } 1697 1698 1699 /*-------------------------------------------------- 1700 * mkascii - make a printable ascii string 1701 * assumes (unless defined better) 7-bit ASCII 1702 */ 1703 static char * 1704 mkascii( 1705 char *buffer, 1706 long blen, 1707 const char *src, 1708 u_long srclen 1709 ) 1710 { 1711 return mkreadable(buffer, blen, src, srclen, 0); 1712 } 1713 1714 /**=========================================================================== 1715 ** implementation of i/o handling methods 1716 ** (all STREAM, partial STREAM, user level) 1717 **/ 1718 1719 /* 1720 * define possible io handling methods 1721 */ 1722 #ifdef STREAM 1723 static int ppsclock_init (struct parseunit *); 1724 static int stream_init (struct parseunit *); 1725 static void stream_end (struct parseunit *); 1726 static int stream_enable (struct parseunit *); 1727 static int stream_disable (struct parseunit *); 1728 static int stream_setcs (struct parseunit *, parsectl_t *); 1729 static int stream_getfmt (struct parseunit *, parsectl_t *); 1730 static int stream_setfmt (struct parseunit *, parsectl_t *); 1731 static int stream_timecode (struct parseunit *, parsectl_t *); 1732 static void stream_receive (struct recvbuf *); 1733 #endif 1734 1735 static int local_init (struct parseunit *); 1736 static void local_end (struct parseunit *); 1737 static int local_nop (struct parseunit *); 1738 static int local_setcs (struct parseunit *, parsectl_t *); 1739 static int local_getfmt (struct parseunit *, parsectl_t *); 1740 static int local_setfmt (struct parseunit *, parsectl_t *); 1741 static int local_timecode (struct parseunit *, parsectl_t *); 1742 static void local_receive (struct recvbuf *); 1743 static int local_input (struct recvbuf *); 1744 1745 static bind_t io_bindings[] = 1746 { 1747 #ifdef STREAM 1748 { 1749 "parse STREAM", 1750 stream_init, 1751 stream_end, 1752 stream_setcs, 1753 stream_disable, 1754 stream_enable, 1755 stream_getfmt, 1756 stream_setfmt, 1757 stream_timecode, 1758 stream_receive, 1759 0, 1760 }, 1761 { 1762 "ppsclock STREAM", 1763 ppsclock_init, 1764 local_end, 1765 local_setcs, 1766 local_nop, 1767 local_nop, 1768 local_getfmt, 1769 local_setfmt, 1770 local_timecode, 1771 local_receive, 1772 local_input, 1773 }, 1774 #endif 1775 { 1776 "normal", 1777 local_init, 1778 local_end, 1779 local_setcs, 1780 local_nop, 1781 local_nop, 1782 local_getfmt, 1783 local_setfmt, 1784 local_timecode, 1785 local_receive, 1786 local_input, 1787 }, 1788 { 1789 (char *)0, 1790 NULL, 1791 NULL, 1792 NULL, 1793 NULL, 1794 NULL, 1795 NULL, 1796 NULL, 1797 NULL, 1798 NULL, 1799 NULL, 1800 } 1801 }; 1802 1803 #ifdef STREAM 1804 1805 /*-------------------------------------------------- 1806 * ppsclock STREAM init 1807 */ 1808 static int 1809 ppsclock_init( 1810 struct parseunit *parse 1811 ) 1812 { 1813 static char m1[] = "ppsclocd"; 1814 static char m2[] = "ppsclock"; 1815 1816 /* 1817 * now push the parse streams module 1818 * it will ensure exclusive access to the device 1819 */ 1820 if (ioctl(parse->ppsfd, I_PUSH, (caddr_t)m1) == -1 && 1821 ioctl(parse->ppsfd, I_PUSH, (caddr_t)m2) == -1) 1822 { 1823 if (errno != EINVAL) 1824 { 1825 msyslog(LOG_ERR, "PARSE receiver #%d: ppsclock_init: ioctl(fd, I_PUSH, \"ppsclock\"): %m", 1826 CLK_UNIT(parse->peer)); 1827 } 1828 return 0; 1829 } 1830 if (!local_init(parse)) 1831 { 1832 (void)ioctl(parse->ppsfd, I_POP, (caddr_t)0); 1833 return 0; 1834 } 1835 1836 parse->flags |= PARSE_PPSCLOCK; 1837 return 1; 1838 } 1839 1840 /*-------------------------------------------------- 1841 * parse STREAM init 1842 */ 1843 static int 1844 stream_init( 1845 struct parseunit *parse 1846 ) 1847 { 1848 static char m1[] = "parse"; 1849 /* 1850 * now push the parse streams module 1851 * to test whether it is there (neat interface 8-( ) 1852 */ 1853 if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) 1854 { 1855 if (errno != EINVAL) /* accept non-existence */ 1856 { 1857 msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); 1858 } 1859 return 0; 1860 } 1861 else 1862 { 1863 while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) 1864 /* empty loop */; 1865 1866 /* 1867 * now push it a second time after we have removed all 1868 * module garbage 1869 */ 1870 if (ioctl(parse->generic->io.fd, I_PUSH, (caddr_t)m1) == -1) 1871 { 1872 msyslog(LOG_ERR, "PARSE receiver #%d: stream_init: ioctl(fd, I_PUSH, \"parse\"): %m", CLK_UNIT(parse->peer)); 1873 return 0; 1874 } 1875 else 1876 { 1877 return 1; 1878 } 1879 } 1880 } 1881 1882 /*-------------------------------------------------- 1883 * parse STREAM end 1884 */ 1885 static void 1886 stream_end( 1887 struct parseunit *parse 1888 ) 1889 { 1890 while(ioctl(parse->generic->io.fd, I_POP, (caddr_t)0) == 0) 1891 /* empty loop */; 1892 } 1893 1894 /*-------------------------------------------------- 1895 * STREAM setcs 1896 */ 1897 static int 1898 stream_setcs( 1899 struct parseunit *parse, 1900 parsectl_t *tcl 1901 ) 1902 { 1903 struct strioctl strioc; 1904 1905 strioc.ic_cmd = PARSEIOC_SETCS; 1906 strioc.ic_timout = 0; 1907 strioc.ic_dp = (char *)tcl; 1908 strioc.ic_len = sizeof (*tcl); 1909 1910 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1911 { 1912 msyslog(LOG_ERR, "PARSE receiver #%d: stream_setcs: ioctl(fd, I_STR, PARSEIOC_SETCS): %m", CLK_UNIT(parse->peer)); 1913 return 0; 1914 } 1915 return 1; 1916 } 1917 1918 /*-------------------------------------------------- 1919 * STREAM enable 1920 */ 1921 static int 1922 stream_enable( 1923 struct parseunit *parse 1924 ) 1925 { 1926 struct strioctl strioc; 1927 1928 strioc.ic_cmd = PARSEIOC_ENABLE; 1929 strioc.ic_timout = 0; 1930 strioc.ic_dp = (char *)0; 1931 strioc.ic_len = 0; 1932 1933 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1934 { 1935 msyslog(LOG_ERR, "PARSE receiver #%d: stream_enable: ioctl(fd, I_STR, PARSEIOC_ENABLE): %m", CLK_UNIT(parse->peer)); 1936 return 0; 1937 } 1938 parse->generic->io.clock_recv = stream_receive; /* ok - parse input in kernel */ 1939 return 1; 1940 } 1941 1942 /*-------------------------------------------------- 1943 * STREAM disable 1944 */ 1945 static int 1946 stream_disable( 1947 struct parseunit *parse 1948 ) 1949 { 1950 struct strioctl strioc; 1951 1952 strioc.ic_cmd = PARSEIOC_DISABLE; 1953 strioc.ic_timout = 0; 1954 strioc.ic_dp = (char *)0; 1955 strioc.ic_len = 0; 1956 1957 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1958 { 1959 msyslog(LOG_ERR, "PARSE receiver #%d: stream_disable: ioctl(fd, I_STR, PARSEIOC_DISABLE): %m", CLK_UNIT(parse->peer)); 1960 return 0; 1961 } 1962 parse->generic->io.clock_recv = local_receive; /* ok - parse input in daemon */ 1963 return 1; 1964 } 1965 1966 /*-------------------------------------------------- 1967 * STREAM getfmt 1968 */ 1969 static int 1970 stream_getfmt( 1971 struct parseunit *parse, 1972 parsectl_t *tcl 1973 ) 1974 { 1975 struct strioctl strioc; 1976 1977 strioc.ic_cmd = PARSEIOC_GETFMT; 1978 strioc.ic_timout = 0; 1979 strioc.ic_dp = (char *)tcl; 1980 strioc.ic_len = sizeof (*tcl); 1981 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 1982 { 1983 msyslog(LOG_ERR, "PARSE receiver #%d: ioctl(fd, I_STR, PARSEIOC_GETFMT): %m", CLK_UNIT(parse->peer)); 1984 return 0; 1985 } 1986 return 1; 1987 } 1988 1989 /*-------------------------------------------------- 1990 * STREAM setfmt 1991 */ 1992 static int 1993 stream_setfmt( 1994 struct parseunit *parse, 1995 parsectl_t *tcl 1996 ) 1997 { 1998 struct strioctl strioc; 1999 2000 strioc.ic_cmd = PARSEIOC_SETFMT; 2001 strioc.ic_timout = 0; 2002 strioc.ic_dp = (char *)tcl; 2003 strioc.ic_len = sizeof (*tcl); 2004 2005 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 2006 { 2007 msyslog(LOG_ERR, "PARSE receiver #%d: stream_setfmt: ioctl(fd, I_STR, PARSEIOC_SETFMT): %m", CLK_UNIT(parse->peer)); 2008 return 0; 2009 } 2010 return 1; 2011 } 2012 2013 2014 /*-------------------------------------------------- 2015 * STREAM timecode 2016 */ 2017 static int 2018 stream_timecode( 2019 struct parseunit *parse, 2020 parsectl_t *tcl 2021 ) 2022 { 2023 struct strioctl strioc; 2024 2025 strioc.ic_cmd = PARSEIOC_TIMECODE; 2026 strioc.ic_timout = 0; 2027 strioc.ic_dp = (char *)tcl; 2028 strioc.ic_len = sizeof (*tcl); 2029 2030 if (ioctl(parse->generic->io.fd, I_STR, (caddr_t)&strioc) == -1) 2031 { 2032 ERR(ERR_INTERNAL) 2033 msyslog(LOG_ERR, "PARSE receiver #%d: stream_timecode: ioctl(fd, I_STR, PARSEIOC_TIMECODE): %m", CLK_UNIT(parse->peer)); 2034 return 0; 2035 } 2036 clear_err(parse, ERR_INTERNAL); 2037 return 1; 2038 } 2039 2040 /*-------------------------------------------------- 2041 * STREAM receive 2042 */ 2043 static void 2044 stream_receive( 2045 struct recvbuf *rbufp 2046 ) 2047 { 2048 struct parseunit * parse; 2049 parsetime_t parsetime; 2050 2051 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2052 if (!parse->peer) 2053 return; 2054 2055 if (rbufp->recv_length != sizeof(parsetime_t)) 2056 { 2057 ERR(ERR_BADIO) 2058 msyslog(LOG_ERR,"PARSE receiver #%d: stream_receive: bad size (got %d expected %d)", 2059 CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); 2060 parse_event(parse, CEVNT_BADREPLY); 2061 return; 2062 } 2063 clear_err(parse, ERR_BADIO); 2064 2065 memmove((caddr_t)&parsetime, 2066 (caddr_t)rbufp->recv_buffer, 2067 sizeof(parsetime_t)); 2068 2069 #ifdef DEBUG 2070 if (debug > 3) 2071 { 2072 printf("PARSE receiver #%d: status %06x, state %08x, time %lx.%08lx, stime %lx.%08lx, ptime %lx.%08lx\n", 2073 CLK_UNIT(parse->peer), 2074 (unsigned int)parsetime.parse_status, 2075 (unsigned int)parsetime.parse_state, 2076 (unsigned long)parsetime.parse_time.tv.tv_sec, 2077 (unsigned long)parsetime.parse_time.tv.tv_usec, 2078 (unsigned long)parsetime.parse_stime.tv.tv_sec, 2079 (unsigned long)parsetime.parse_stime.tv.tv_usec, 2080 (unsigned long)parsetime.parse_ptime.tv.tv_sec, 2081 (unsigned long)parsetime.parse_ptime.tv.tv_usec); 2082 } 2083 #endif 2084 2085 /* 2086 * switch time stamp world - be sure to normalize small usec field 2087 * errors. 2088 */ 2089 2090 parsetime.parse_stime.fp = tval_stamp_to_lfp(parsetime.parse_stime.tv); 2091 2092 if (PARSE_TIMECODE(parsetime.parse_state)) 2093 { 2094 parsetime.parse_time.fp = tval_stamp_to_lfp(parsetime.parse_time.tv); 2095 } 2096 2097 if (PARSE_PPS(parsetime.parse_state)) 2098 { 2099 parsetime.parse_ptime.fp = tval_stamp_to_lfp(parsetime.parse_ptime.tv); 2100 } 2101 2102 parse_process(parse, &parsetime); 2103 } 2104 #endif 2105 2106 /*-------------------------------------------------- 2107 * local init 2108 */ 2109 static int 2110 local_init( 2111 struct parseunit *parse 2112 ) 2113 { 2114 return parse_ioinit(&parse->parseio); 2115 } 2116 2117 /*-------------------------------------------------- 2118 * local end 2119 */ 2120 static void 2121 local_end( 2122 struct parseunit *parse 2123 ) 2124 { 2125 parse_ioend(&parse->parseio); 2126 } 2127 2128 2129 /*-------------------------------------------------- 2130 * local nop 2131 */ 2132 static int 2133 local_nop( 2134 struct parseunit *parse 2135 ) 2136 { 2137 return 1; 2138 } 2139 2140 /*-------------------------------------------------- 2141 * local setcs 2142 */ 2143 static int 2144 local_setcs( 2145 struct parseunit *parse, 2146 parsectl_t *tcl 2147 ) 2148 { 2149 return parse_setcs(tcl, &parse->parseio); 2150 } 2151 2152 /*-------------------------------------------------- 2153 * local getfmt 2154 */ 2155 static int 2156 local_getfmt( 2157 struct parseunit *parse, 2158 parsectl_t *tcl 2159 ) 2160 { 2161 return parse_getfmt(tcl, &parse->parseio); 2162 } 2163 2164 /*-------------------------------------------------- 2165 * local setfmt 2166 */ 2167 static int 2168 local_setfmt( 2169 struct parseunit *parse, 2170 parsectl_t *tcl 2171 ) 2172 { 2173 return parse_setfmt(tcl, &parse->parseio); 2174 } 2175 2176 /*-------------------------------------------------- 2177 * local timecode 2178 */ 2179 static int 2180 local_timecode( 2181 struct parseunit *parse, 2182 parsectl_t *tcl 2183 ) 2184 { 2185 return parse_timecode(tcl, &parse->parseio); 2186 } 2187 2188 2189 /*-------------------------------------------------- 2190 * local input 2191 */ 2192 static int 2193 local_input( 2194 struct recvbuf *rbufp 2195 ) 2196 { 2197 struct parseunit * parse; 2198 2199 int count; 2200 unsigned char *s; 2201 timestamp_t ts; 2202 2203 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2204 if (!parse->peer) 2205 return 0; 2206 2207 /* 2208 * eat all characters, parsing then and feeding complete samples 2209 */ 2210 count = rbufp->recv_length; 2211 s = (unsigned char *)rbufp->recv_buffer; 2212 ts.fp = rbufp->recv_time; 2213 2214 while (count--) 2215 { 2216 if (parse_ioread(&parse->parseio, (unsigned int)(*s++), &ts)) 2217 { 2218 struct recvbuf *buf; 2219 2220 /* 2221 * got something good to eat 2222 */ 2223 if (!PARSE_PPS(parse->parseio.parse_dtime.parse_state)) 2224 { 2225 #ifdef HAVE_PPSAPI 2226 if (parse->flags & PARSE_PPSCLOCK) 2227 { 2228 struct timespec pps_timeout; 2229 pps_info_t pps_info; 2230 2231 pps_timeout.tv_sec = 0; 2232 pps_timeout.tv_nsec = 0; 2233 2234 if (time_pps_fetch(parse->atom.handle, PPS_TSFMT_TSPEC, &pps_info, 2235 &pps_timeout) == 0) 2236 { 2237 if (pps_info.assert_sequence + pps_info.clear_sequence != parse->ppsserial) 2238 { 2239 double dtemp; 2240 2241 struct timespec pts; 2242 /* 2243 * add PPS time stamp if available via ppsclock module 2244 * and not supplied already. 2245 */ 2246 if (parse->flags & PARSE_CLEAR) 2247 pts = pps_info.clear_timestamp; 2248 else 2249 pts = pps_info.assert_timestamp; 2250 2251 parse->parseio.parse_dtime.parse_ptime.fp.l_ui = (uint32_t) (pts.tv_sec + JAN_1970); 2252 2253 dtemp = (double) pts.tv_nsec / 1e9; 2254 if (dtemp < 0.) { 2255 dtemp += 1; 2256 parse->parseio.parse_dtime.parse_ptime.fp.l_ui--; 2257 } 2258 if (dtemp > 1.) { 2259 dtemp -= 1; 2260 parse->parseio.parse_dtime.parse_ptime.fp.l_ui++; 2261 } 2262 parse->parseio.parse_dtime.parse_ptime.fp.l_uf = (uint32_t)(dtemp * FRAC); 2263 2264 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2265 #ifdef DEBUG 2266 if (debug > 3) 2267 { 2268 printf( 2269 "parse: local_receive: fd %d PPSAPI seq %ld - PPS %s\n", 2270 rbufp->fd, 2271 (long)pps_info.assert_sequence + (long)pps_info.clear_sequence, 2272 lfptoa(&parse->parseio.parse_dtime.parse_ptime.fp, 6)); 2273 } 2274 #endif 2275 } 2276 #ifdef DEBUG 2277 else 2278 { 2279 if (debug > 3) 2280 { 2281 printf( 2282 "parse: local_receive: fd %d PPSAPI seq assert %ld, seq clear %ld - NO PPS event\n", 2283 rbufp->fd, 2284 (long)pps_info.assert_sequence, (long)pps_info.clear_sequence); 2285 } 2286 } 2287 #endif 2288 parse->ppsserial = pps_info.assert_sequence + pps_info.clear_sequence; 2289 } 2290 #ifdef DEBUG 2291 else 2292 { 2293 if (debug > 3) 2294 { 2295 printf( 2296 "parse: local_receive: fd %d PPSAPI time_pps_fetch errno = %d\n", 2297 rbufp->fd, 2298 errno); 2299 } 2300 } 2301 #endif 2302 } 2303 #else 2304 #ifdef TIOCDCDTIMESTAMP 2305 struct timeval dcd_time; 2306 2307 if (ioctl(parse->ppsfd, TIOCDCDTIMESTAMP, &dcd_time) != -1) 2308 { 2309 l_fp tstmp; 2310 2311 TVTOTS(&dcd_time, &tstmp); 2312 tstmp.l_ui += JAN_1970; 2313 L_SUB(&ts.fp, &tstmp); 2314 if (ts.fp.l_ui == 0) 2315 { 2316 #ifdef DEBUG 2317 if (debug) 2318 { 2319 printf( 2320 "parse: local_receive: fd %d DCDTIMESTAMP %s\n", 2321 parse->ppsfd, 2322 lfptoa(&tstmp, 6)); 2323 printf(" sigio %s\n", 2324 lfptoa(&ts.fp, 6)); 2325 } 2326 #endif 2327 parse->parseio.parse_dtime.parse_ptime.fp = tstmp; 2328 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2329 } 2330 } 2331 #else /* TIOCDCDTIMESTAMP */ 2332 #if defined(HAVE_STRUCT_PPSCLOCKEV) && (defined(HAVE_CIOGETEV) || defined(HAVE_TIOCGPPSEV)) 2333 if (parse->flags & PARSE_PPSCLOCK) 2334 { 2335 l_fp tts; 2336 struct ppsclockev ev; 2337 2338 #ifdef HAVE_CIOGETEV 2339 if (ioctl(parse->ppsfd, CIOGETEV, (caddr_t)&ev) == 0) 2340 #endif 2341 #ifdef HAVE_TIOCGPPSEV 2342 if (ioctl(parse->ppsfd, TIOCGPPSEV, (caddr_t)&ev) == 0) 2343 #endif 2344 { 2345 if (ev.serial != parse->ppsserial) 2346 { 2347 /* 2348 * add PPS time stamp if available via ppsclock module 2349 * and not supplied already. 2350 */ 2351 if (!buftvtots((const char *)&ev.tv, &tts)) 2352 { 2353 ERR(ERR_BADDATA) 2354 msyslog(LOG_ERR,"parse: local_receive: timestamp conversion error (buftvtots) (ppsclockev.tv)"); 2355 } 2356 else 2357 { 2358 parse->parseio.parse_dtime.parse_ptime.fp = tts; 2359 parse->parseio.parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 2360 } 2361 } 2362 parse->ppsserial = ev.serial; 2363 } 2364 } 2365 #endif 2366 #endif /* TIOCDCDTIMESTAMP */ 2367 #endif /* !HAVE_PPSAPI */ 2368 } 2369 if (count) 2370 { /* simulate receive */ 2371 buf = get_free_recv_buffer(); 2372 if (buf != NULL) { 2373 memmove((caddr_t)buf->recv_buffer, 2374 (caddr_t)&parse->parseio.parse_dtime, 2375 sizeof(parsetime_t)); 2376 buf->recv_length = sizeof(parsetime_t); 2377 buf->recv_time = rbufp->recv_time; 2378 #ifndef HAVE_IO_COMPLETION_PORT 2379 buf->srcadr = rbufp->srcadr; 2380 #endif 2381 buf->dstadr = rbufp->dstadr; 2382 buf->receiver = rbufp->receiver; 2383 buf->fd = rbufp->fd; 2384 buf->X_from_where = rbufp->X_from_where; 2385 parse->generic->io.recvcount++; 2386 packets_received++; 2387 add_full_recv_buffer(buf); 2388 #ifdef HAVE_IO_COMPLETION_PORT 2389 SetEvent(WaitableIoEventHandle); 2390 #endif 2391 } 2392 parse_iodone(&parse->parseio); 2393 } 2394 else 2395 { 2396 memmove((caddr_t)rbufp->recv_buffer, 2397 (caddr_t)&parse->parseio.parse_dtime, 2398 sizeof(parsetime_t)); 2399 parse_iodone(&parse->parseio); 2400 rbufp->recv_length = sizeof(parsetime_t); 2401 return 1; /* got something & in place return */ 2402 } 2403 } 2404 } 2405 return 0; /* nothing to pass up */ 2406 } 2407 2408 /*-------------------------------------------------- 2409 * local receive 2410 */ 2411 static void 2412 local_receive( 2413 struct recvbuf *rbufp 2414 ) 2415 { 2416 struct parseunit * parse; 2417 parsetime_t parsetime; 2418 2419 parse = (struct parseunit *)rbufp->recv_peer->procptr->unitptr; 2420 if (!parse->peer) 2421 return; 2422 2423 if (rbufp->recv_length != sizeof(parsetime_t)) 2424 { 2425 ERR(ERR_BADIO) 2426 msyslog(LOG_ERR,"PARSE receiver #%d: local_receive: bad size (got %d expected %d)", 2427 CLK_UNIT(parse->peer), rbufp->recv_length, (int)sizeof(parsetime_t)); 2428 parse_event(parse, CEVNT_BADREPLY); 2429 return; 2430 } 2431 clear_err(parse, ERR_BADIO); 2432 2433 memmove((caddr_t)&parsetime, 2434 (caddr_t)rbufp->recv_buffer, 2435 sizeof(parsetime_t)); 2436 2437 #ifdef DEBUG 2438 if (debug > 3) 2439 { 2440 printf("PARSE receiver #%d: status %06x, state %08x, time(fp) %lx.%08lx, stime(fp) %lx.%08lx, ptime(fp) %lx.%08lx\n", 2441 CLK_UNIT(parse->peer), 2442 (unsigned int)parsetime.parse_status, 2443 (unsigned int)parsetime.parse_state, 2444 (unsigned long)parsetime.parse_time.fp.l_ui, 2445 (unsigned long)parsetime.parse_time.fp.l_uf, 2446 (unsigned long)parsetime.parse_stime.fp.l_ui, 2447 (unsigned long)parsetime.parse_stime.fp.l_uf, 2448 (unsigned long)parsetime.parse_ptime.fp.l_ui, 2449 (unsigned long)parsetime.parse_ptime.fp.l_uf); 2450 } 2451 #endif 2452 2453 parse_process(parse, &parsetime); 2454 } 2455 2456 /*-------------------------------------------------- 2457 * init_iobinding - find and initialize lower layers 2458 */ 2459 static bind_t * 2460 init_iobinding( 2461 struct parseunit *parse 2462 ) 2463 { 2464 bind_t *b = io_bindings; 2465 2466 while (b->bd_description != (char *)0) 2467 { 2468 if ((*b->bd_init)(parse)) 2469 { 2470 return b; 2471 } 2472 b++; 2473 } 2474 return (bind_t *)0; 2475 } 2476 2477 /**=========================================================================== 2478 ** support routines 2479 **/ 2480 2481 static NTP_PRINTF(4, 5) char * 2482 ap(char *buffer, size_t len, char *pos, const char *fmt, ...) 2483 { 2484 va_list va; 2485 int l; 2486 size_t rem = len - (pos - buffer); 2487 2488 if (rem == 0) 2489 return pos; 2490 2491 va_start(va, fmt); 2492 l = vsnprintf(pos, rem, fmt, va); 2493 va_end(va); 2494 2495 if (l != -1) { 2496 rem--; 2497 if (rem >= (size_t)l) 2498 pos += l; 2499 else 2500 pos += rem; 2501 } 2502 2503 return pos; 2504 } 2505 2506 /*-------------------------------------------------- 2507 * convert a flag field to a string 2508 */ 2509 static char * 2510 parsestate( 2511 u_long lstate, 2512 char *buffer, 2513 int size 2514 ) 2515 { 2516 static struct bits 2517 { 2518 u_long bit; 2519 const char *name; 2520 } flagstrings[] = 2521 { 2522 { PARSEB_ANNOUNCE, "DST SWITCH WARNING" }, 2523 { PARSEB_POWERUP, "NOT SYNCHRONIZED" }, 2524 { PARSEB_NOSYNC, "TIME CODE NOT CONFIRMED" }, 2525 { PARSEB_DST, "DST" }, 2526 { PARSEB_UTC, "UTC DISPLAY" }, 2527 { PARSEB_LEAPADD, "LEAP ADD WARNING" }, 2528 { PARSEB_LEAPDEL, "LEAP DELETE WARNING" }, 2529 { PARSEB_LEAPSECOND, "LEAP SECOND" }, 2530 { PARSEB_CALLBIT, "CALL BIT" }, 2531 { PARSEB_TIMECODE, "TIME CODE" }, 2532 { PARSEB_PPS, "PPS" }, 2533 { PARSEB_POSITION, "POSITION" }, 2534 { 0, NULL } 2535 }; 2536 2537 static struct sbits 2538 { 2539 u_long bit; 2540 const char *name; 2541 } sflagstrings[] = 2542 { 2543 { PARSEB_S_LEAP, "LEAP INDICATION" }, 2544 { PARSEB_S_PPS, "PPS SIGNAL" }, 2545 { PARSEB_S_CALLBIT, "CALLBIT" }, 2546 { PARSEB_S_POSITION, "POSITION" }, 2547 { 0, NULL } 2548 }; 2549 int i; 2550 char *s, *t; 2551 2552 *buffer = '\0'; 2553 s = t = buffer; 2554 2555 i = 0; 2556 while (flagstrings[i].bit) 2557 { 2558 if (flagstrings[i].bit & lstate) 2559 { 2560 if (s != t) 2561 t = ap(buffer, size, t, "; "); 2562 t = ap(buffer, size, t, "%s", flagstrings[i].name); 2563 } 2564 i++; 2565 } 2566 2567 if (lstate & (PARSEB_S_LEAP|PARSEB_S_CALLBIT|PARSEB_S_PPS|PARSEB_S_POSITION)) 2568 { 2569 if (s != t) 2570 t = ap(buffer, size, t, "; "); 2571 2572 t = ap(buffer, size, t, "("); 2573 2574 s = t; 2575 2576 i = 0; 2577 while (sflagstrings[i].bit) 2578 { 2579 if (sflagstrings[i].bit & lstate) 2580 { 2581 if (t != s) 2582 { 2583 t = ap(buffer, size, t, "; "); 2584 } 2585 2586 t = ap(buffer, size, t, "%s", 2587 sflagstrings[i].name); 2588 } 2589 i++; 2590 } 2591 t = ap(buffer, size, t, ")"); 2592 /* t is unused here, but if we don't track it and 2593 * need it later, that's a bug waiting to happen. 2594 */ 2595 } 2596 return buffer; 2597 } 2598 2599 /*-------------------------------------------------- 2600 * convert a status flag field to a string 2601 */ 2602 static char * 2603 parsestatus( 2604 u_long lstate, 2605 char *buffer, 2606 int size 2607 ) 2608 { 2609 static struct bits 2610 { 2611 u_long bit; 2612 const char *name; 2613 } flagstrings[] = 2614 { 2615 { CVT_OK, "CONVERSION SUCCESSFUL" }, 2616 { CVT_NONE, "NO CONVERSION" }, 2617 { CVT_FAIL, "CONVERSION FAILED" }, 2618 { CVT_BADFMT, "ILLEGAL FORMAT" }, 2619 { CVT_BADDATE, "DATE ILLEGAL" }, 2620 { CVT_BADTIME, "TIME ILLEGAL" }, 2621 { CVT_ADDITIONAL, "ADDITIONAL DATA" }, 2622 { 0, NULL } 2623 }; 2624 int i; 2625 char *t; 2626 2627 t = buffer; 2628 *buffer = '\0'; 2629 2630 i = 0; 2631 while (flagstrings[i].bit) 2632 { 2633 if (flagstrings[i].bit & lstate) 2634 { 2635 if (t != buffer) 2636 t = ap(buffer, size, t, "; "); 2637 t = ap(buffer, size, t, "%s", flagstrings[i].name); 2638 } 2639 i++; 2640 } 2641 2642 return buffer; 2643 } 2644 2645 /*-------------------------------------------------- 2646 * convert a clock status flag field to a string 2647 */ 2648 static const char * 2649 clockstatus( 2650 u_long lstate 2651 ) 2652 { 2653 static char buffer[20]; 2654 static struct status 2655 { 2656 u_long value; 2657 const char *name; 2658 } flagstrings[] = 2659 { 2660 { CEVNT_NOMINAL, "NOMINAL" }, 2661 { CEVNT_TIMEOUT, "NO RESPONSE" }, 2662 { CEVNT_BADREPLY,"BAD FORMAT" }, 2663 { CEVNT_FAULT, "FAULT" }, 2664 { CEVNT_PROP, "PROPAGATION DELAY" }, 2665 { CEVNT_BADDATE, "ILLEGAL DATE" }, 2666 { CEVNT_BADTIME, "ILLEGAL TIME" }, 2667 { (unsigned)~0L, NULL } 2668 }; 2669 int i; 2670 2671 i = 0; 2672 while (flagstrings[i].value != (u_int)~0) 2673 { 2674 if (flagstrings[i].value == lstate) 2675 { 2676 return flagstrings[i].name; 2677 } 2678 i++; 2679 } 2680 2681 snprintf(buffer, sizeof(buffer), "unknown #%ld", (u_long)lstate); 2682 2683 return buffer; 2684 } 2685 2686 2687 /*-------------------------------------------------- 2688 * l_mktime - make representation of a relative time 2689 */ 2690 static char * 2691 l_mktime( 2692 u_long delta 2693 ) 2694 { 2695 u_long tmp, m, s; 2696 static char buffer[40]; 2697 char *t; 2698 2699 buffer[0] = '\0'; 2700 t = buffer; 2701 2702 if ((tmp = delta / (60*60*24)) != 0) 2703 { 2704 t = ap(buffer, sizeof(buffer), t, "%ldd+", (u_long)tmp); 2705 delta -= tmp * 60*60*24; 2706 } 2707 2708 s = delta % 60; 2709 delta /= 60; 2710 m = delta % 60; 2711 delta /= 60; 2712 2713 t = ap(buffer, sizeof(buffer), t, "%02d:%02d:%02d", 2714 (int)delta, (int)m, (int)s); 2715 2716 return buffer; 2717 } 2718 2719 2720 /*-------------------------------------------------- 2721 * parse_statistics - list summary of clock states 2722 */ 2723 static void 2724 parse_statistics( 2725 struct parseunit *parse 2726 ) 2727 { 2728 int i; 2729 2730 NLOG(NLOG_CLOCKSTATIST) /* conditional if clause for conditional syslog */ 2731 { 2732 msyslog(LOG_INFO, "PARSE receiver #%d: running time: %s", 2733 CLK_UNIT(parse->peer), 2734 l_mktime(current_time - parse->generic->timestarted)); 2735 2736 msyslog(LOG_INFO, "PARSE receiver #%d: current status: %s", 2737 CLK_UNIT(parse->peer), 2738 clockstatus(parse->generic->currentstatus)); 2739 2740 for (i = 0; i <= CEVNT_MAX; i++) 2741 { 2742 u_long s_time; 2743 u_long percent, d = current_time - parse->generic->timestarted; 2744 2745 percent = s_time = PARSE_STATETIME(parse, i); 2746 2747 while (((u_long)(~0) / 10000) < percent) 2748 { 2749 percent /= 10; 2750 d /= 10; 2751 } 2752 2753 if (d) 2754 percent = (percent * 10000) / d; 2755 else 2756 percent = 10000; 2757 2758 if (s_time) 2759 msyslog(LOG_INFO, "PARSE receiver #%d: state %18s: %13s (%3ld.%02ld%%)", 2760 CLK_UNIT(parse->peer), 2761 clockstatus((unsigned int)i), 2762 l_mktime(s_time), 2763 percent / 100, percent % 100); 2764 } 2765 } 2766 } 2767 2768 /*-------------------------------------------------- 2769 * cparse_statistics - wrapper for statistics call 2770 */ 2771 static void 2772 cparse_statistics( 2773 struct parseunit *parse 2774 ) 2775 { 2776 if (parse->laststatistic + PARSESTATISTICS < current_time) 2777 parse_statistics(parse); 2778 parse->laststatistic = current_time; 2779 } 2780 2781 /**=========================================================================== 2782 ** ntp interface routines 2783 **/ 2784 2785 /*-------------------------------------------------- 2786 * parse_shutdown - shut down a PARSE clock 2787 */ 2788 static void 2789 parse_shutdown( 2790 int unit, 2791 struct peer *peer 2792 ) 2793 { 2794 struct parseunit *parse = NULL; 2795 2796 if (peer && peer->procptr) 2797 parse = peer->procptr->unitptr; 2798 2799 if (!parse) 2800 { 2801 /* nothing to clean up */ 2802 return; 2803 } 2804 2805 if (!parse->peer) 2806 { 2807 msyslog(LOG_INFO, "PARSE receiver #%d: INTERNAL ERROR - unit already inactive - shutdown ignored", unit); 2808 return; 2809 } 2810 2811 #ifdef HAVE_PPSAPI 2812 if (parse->flags & PARSE_PPSCLOCK) 2813 { 2814 (void)time_pps_destroy(parse->atom.handle); 2815 } 2816 #endif 2817 if (parse->generic->io.fd != parse->ppsfd && parse->ppsfd != -1) 2818 (void)closeserial(parse->ppsfd); /* close separate PPS source */ 2819 2820 /* 2821 * print statistics a last time and 2822 * stop statistics machine 2823 */ 2824 parse_statistics(parse); 2825 2826 if (parse->parse_type->cl_end) 2827 { 2828 parse->parse_type->cl_end(parse); 2829 } 2830 2831 /* 2832 * cleanup before leaving this world 2833 */ 2834 if (parse->binding) 2835 PARSE_END(parse); 2836 2837 /* 2838 * Tell the I/O module to turn us off. We're history. 2839 */ 2840 io_closeclock(&parse->generic->io); 2841 2842 free_varlist(parse->kv); 2843 2844 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 2845 msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" removed", 2846 CLK_UNIT(parse->peer), parse->parse_type->cl_description); 2847 2848 parse->peer = (struct peer *)0; /* unused now */ 2849 peer->procptr->unitptr = (caddr_t)0; 2850 free(parse); 2851 } 2852 2853 #ifdef HAVE_PPSAPI 2854 /*---------------------------------------- 2855 * set up HARDPPS via PPSAPI 2856 */ 2857 static void 2858 parse_hardpps( 2859 struct parseunit *parse, 2860 int mode 2861 ) 2862 { 2863 if (parse->hardppsstate == mode) 2864 return; 2865 2866 if (CLK_PPS(parse->peer) && (parse->flags & PARSE_PPSKERNEL)) { 2867 int i = 0; 2868 2869 if (mode == PARSE_HARDPPS_ENABLE) 2870 { 2871 if (parse->flags & PARSE_CLEAR) 2872 i = PPS_CAPTURECLEAR; 2873 else 2874 i = PPS_CAPTUREASSERT; 2875 } 2876 2877 if (time_pps_kcbind(parse->atom.handle, PPS_KC_HARDPPS, i, 2878 PPS_TSFMT_TSPEC) < 0) { 2879 msyslog(LOG_ERR, "PARSE receiver #%d: time_pps_kcbind failed: %m", 2880 CLK_UNIT(parse->peer)); 2881 } else { 2882 NLOG(NLOG_CLOCKINFO) 2883 msyslog(LOG_INFO, "PARSE receiver #%d: kernel PPS synchronisation %sabled", 2884 CLK_UNIT(parse->peer), (mode == PARSE_HARDPPS_ENABLE) ? "en" : "dis"); 2885 /* 2886 * tell the rest, that we have a kernel PPS source, iff we ever enable HARDPPS 2887 */ 2888 if (mode == PARSE_HARDPPS_ENABLE) 2889 hardpps_enable = 1; 2890 } 2891 } 2892 2893 parse->hardppsstate = mode; 2894 } 2895 2896 /*---------------------------------------- 2897 * set up PPS via PPSAPI 2898 */ 2899 static int 2900 parse_ppsapi( 2901 struct parseunit *parse 2902 ) 2903 { 2904 int cap, mode_ppsoffset; 2905 const char *cp; 2906 2907 parse->flags &= (u_char) (~PARSE_PPSCLOCK); 2908 2909 /* 2910 * collect PPSAPI offset capability - should move into generic handling 2911 */ 2912 if (time_pps_getcap(parse->atom.handle, &cap) < 0) { 2913 msyslog(LOG_ERR, "PARSE receiver #%d: parse_ppsapi: time_pps_getcap failed: %m", 2914 CLK_UNIT(parse->peer)); 2915 2916 return 0; 2917 } 2918 2919 /* 2920 * initialize generic PPSAPI interface 2921 * 2922 * we leave out CLK_FLAG3 as time_pps_kcbind() 2923 * is handled here for now. Ideally this should also 2924 * be part of the generic PPSAPI interface 2925 */ 2926 if (!refclock_params(parse->flags & (CLK_FLAG1|CLK_FLAG2|CLK_FLAG4), &parse->atom)) 2927 return 0; 2928 2929 /* nb. only turn things on, if someone else has turned something 2930 * on before we get here, leave it alone! 2931 */ 2932 2933 if (parse->flags & PARSE_CLEAR) { 2934 cp = "CLEAR"; 2935 mode_ppsoffset = PPS_OFFSETCLEAR; 2936 } else { 2937 cp = "ASSERT"; 2938 mode_ppsoffset = PPS_OFFSETASSERT; 2939 } 2940 2941 msyslog(LOG_INFO, "PARSE receiver #%d: initializing PPS to %s", 2942 CLK_UNIT(parse->peer), cp); 2943 2944 if (!(mode_ppsoffset & cap)) { 2945 msyslog(LOG_WARNING, "PARSE receiver #%d: Cannot set PPS_%sCLEAR, this will increase jitter (PPS API capabilities=0x%x)", 2946 CLK_UNIT(parse->peer), cp, cap); 2947 mode_ppsoffset = 0; 2948 } else { 2949 if (mode_ppsoffset == PPS_OFFSETCLEAR) 2950 { 2951 parse->atom.pps_params.clear_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); 2952 parse->atom.pps_params.clear_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); 2953 } 2954 2955 if (mode_ppsoffset == PPS_OFFSETASSERT) 2956 { 2957 parse->atom.pps_params.assert_offset.tv_sec = (time_t)(-parse->ppsphaseadjust); 2958 parse->atom.pps_params.assert_offset.tv_nsec = (long)(-1e9*(parse->ppsphaseadjust - (double)(long)parse->ppsphaseadjust)); 2959 } 2960 } 2961 2962 parse->atom.pps_params.mode |= mode_ppsoffset; 2963 2964 if (time_pps_setparams(parse->atom.handle, &parse->atom.pps_params) < 0) { 2965 msyslog(LOG_ERR, "PARSE receiver #%d: FAILED set PPS parameters: %m", 2966 CLK_UNIT(parse->peer)); 2967 return 0; 2968 } 2969 2970 parse->flags |= PARSE_PPSCLOCK; 2971 return 1; 2972 } 2973 #else 2974 #define parse_hardpps(_PARSE_, _MODE_) /* empty */ 2975 #endif 2976 2977 /*-------------------------------------------------- 2978 * parse_start - open the PARSE devices and initialize data for processing 2979 */ 2980 static int 2981 parse_start( 2982 int sysunit, 2983 struct peer *peer 2984 ) 2985 { 2986 u_int unit; 2987 int fd232; 2988 #ifdef HAVE_TERMIOS 2989 struct termios tio; /* NEEDED FOR A LONG TIME ! */ 2990 #endif 2991 #ifdef HAVE_SYSV_TTYS 2992 struct termio tio; /* NEEDED FOR A LONG TIME ! */ 2993 #endif 2994 struct parseunit * parse; 2995 char parsedev[sizeof(PARSEDEVICE)+20]; 2996 char parseppsdev[sizeof(PARSEPPSDEVICE)+20]; 2997 parsectl_t tmp_ctl; 2998 u_int type; 2999 3000 /* 3001 * get out Copyright information once 3002 */ 3003 if (!notice) 3004 { 3005 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3006 msyslog(LOG_INFO, "NTP PARSE support: Copyright (c) 1989-2015, Frank Kardel"); 3007 notice = 1; 3008 } 3009 3010 type = CLK_TYPE(peer); 3011 unit = CLK_UNIT(peer); 3012 3013 if ((type == (u_int)~0) || (parse_clockinfo[type].cl_description == (char *)0)) 3014 { 3015 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: unsupported clock type %d (max %d)", 3016 unit, CLK_REALTYPE(peer), ncltypes-1); 3017 return 0; 3018 } 3019 3020 /* 3021 * Unit okay, attempt to open the device. 3022 */ 3023 (void) snprintf(parsedev, sizeof(parsedev), PARSEDEVICE, unit); 3024 (void) snprintf(parseppsdev, sizeof(parsedev), PARSEPPSDEVICE, unit); 3025 3026 #ifndef O_NOCTTY 3027 #define O_NOCTTY 0 3028 #endif 3029 #ifndef O_NONBLOCK 3030 #define O_NONBLOCK 0 3031 #endif 3032 3033 fd232 = tty_open(parsedev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); 3034 3035 if (fd232 == -1) 3036 { 3037 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: open of %s failed: %m", unit, parsedev); 3038 return 0; 3039 } 3040 3041 parse = emalloc_zero(sizeof(*parse)); 3042 3043 parse->generic = peer->procptr; /* link up */ 3044 parse->generic->unitptr = (caddr_t)parse; /* link down */ 3045 3046 /* 3047 * Set up the structures 3048 */ 3049 parse->generic->timestarted = current_time; 3050 parse->lastchange = current_time; 3051 3052 parse->flags = 0; 3053 parse->pollneeddata = 0; 3054 parse->laststatistic = current_time; 3055 parse->lastformat = (unsigned short)~0; /* assume no format known */ 3056 parse->timedata.parse_status = (unsigned short)~0; /* be sure to mark initial status change */ 3057 parse->lastmissed = 0; /* assume got everything */ 3058 parse->ppsserial = 0; 3059 parse->ppsfd = -1; 3060 parse->localdata = (void *)0; 3061 parse->localstate = 0; 3062 parse->kv = (struct ctl_var *)0; 3063 3064 clear_err(parse, ERR_ALL); 3065 3066 parse->parse_type = &parse_clockinfo[type]; 3067 3068 parse->maxunsync = parse->parse_type->cl_maxunsync; 3069 3070 parse->generic->fudgetime1 = parse->parse_type->cl_basedelay; 3071 3072 parse->generic->fudgetime2 = 0.0; 3073 parse->ppsphaseadjust = parse->generic->fudgetime2; 3074 3075 parse->generic->clockdesc = parse->parse_type->cl_description; 3076 3077 peer->rootdelay = parse->parse_type->cl_rootdelay; 3078 peer->sstclktype = parse->parse_type->cl_type; 3079 peer->precision = sys_precision; 3080 3081 peer->stratum = STRATUM_REFCLOCK; 3082 3083 if (peer->stratum <= 1) 3084 memmove((char *)&parse->generic->refid, parse->parse_type->cl_id, 4); 3085 else 3086 parse->generic->refid = htonl(PARSEHSREFID); 3087 3088 parse->generic->io.fd = fd232; 3089 3090 parse->peer = peer; /* marks it also as busy */ 3091 3092 /* 3093 * configure terminal line 3094 */ 3095 if (TTY_GETATTR(fd232, &tio) == -1) 3096 { 3097 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcgetattr(%d, &tio): %m", unit, fd232); 3098 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3099 return 0; 3100 } 3101 else 3102 { 3103 #ifndef _PC_VDISABLE 3104 memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); 3105 #else 3106 int disablec; 3107 errno = 0; /* pathconf can deliver -1 without changing errno ! */ 3108 3109 disablec = fpathconf(parse->generic->io.fd, _PC_VDISABLE); 3110 if (disablec == -1 && errno) 3111 { 3112 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: fpathconf(fd, _PC_VDISABLE): %m", CLK_UNIT(parse->peer)); 3113 memset((char *)tio.c_cc, 0, sizeof(tio.c_cc)); /* best guess */ 3114 } 3115 else 3116 if (disablec != -1) 3117 memset((char *)tio.c_cc, disablec, sizeof(tio.c_cc)); 3118 #endif 3119 3120 #if defined (VMIN) || defined(VTIME) 3121 if ((parse_clockinfo[type].cl_lflag & ICANON) == 0) 3122 { 3123 #ifdef VMIN 3124 tio.c_cc[VMIN] = 1; 3125 #endif 3126 #ifdef VTIME 3127 tio.c_cc[VTIME] = 0; 3128 #endif 3129 } 3130 #endif 3131 3132 tio.c_cflag = (tcflag_t) parse_clockinfo[type].cl_cflag; 3133 tio.c_iflag = (tcflag_t) parse_clockinfo[type].cl_iflag; 3134 tio.c_oflag = (tcflag_t) parse_clockinfo[type].cl_oflag; 3135 tio.c_lflag = (tcflag_t) parse_clockinfo[type].cl_lflag; 3136 3137 3138 #ifdef HAVE_TERMIOS 3139 if ((cfsetospeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1) || 3140 (cfsetispeed(&tio, (speed_t) parse_clockinfo[type].cl_speed) == -1)) 3141 { 3142 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcset{i,o}speed(&tio, speed): %m", unit); 3143 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3144 return 0; 3145 } 3146 #else 3147 tio.c_cflag |= parse_clockinfo[type].cl_speed; 3148 #endif 3149 3150 /* 3151 * set up pps device 3152 * if the PARSEPPSDEVICE can be opened that will be used 3153 * for PPS else PARSEDEVICE will be used 3154 */ 3155 parse->ppsfd = tty_open(parseppsdev, O_RDWR | O_NOCTTY | O_NONBLOCK, 0777); 3156 3157 if (parse->ppsfd == -1) 3158 { 3159 parse->ppsfd = fd232; 3160 } 3161 3162 /* 3163 * Linux PPS - the old way 3164 */ 3165 #if defined(HAVE_TIO_SERIAL_STUFF) /* Linux hack: define PPS interface */ 3166 { 3167 struct serial_struct ss; 3168 if (ioctl(parse->ppsfd, TIOCGSERIAL, &ss) < 0 || 3169 ( 3170 #ifdef ASYNC_LOW_LATENCY 3171 ss.flags |= ASYNC_LOW_LATENCY, 3172 #endif 3173 #ifndef HAVE_PPSAPI 3174 #ifdef ASYNC_PPS_CD_NEG 3175 ss.flags |= ASYNC_PPS_CD_NEG, 3176 #endif 3177 #endif 3178 ioctl(parse->ppsfd, TIOCSSERIAL, &ss)) < 0) { 3179 msyslog(LOG_NOTICE, "refclock_parse: TIOCSSERIAL fd %d, %m", parse->ppsfd); 3180 msyslog(LOG_NOTICE, 3181 "refclock_parse: optional PPS processing not available"); 3182 } else { 3183 parse->flags |= PARSE_PPSCLOCK; 3184 #ifdef ASYNC_PPS_CD_NEG 3185 NLOG(NLOG_CLOCKINFO) 3186 msyslog(LOG_INFO, 3187 "refclock_parse: PPS detection on"); 3188 #endif 3189 } 3190 } 3191 #endif 3192 3193 /* 3194 * SUN the Solaris way 3195 */ 3196 #ifdef HAVE_TIOCSPPS /* SUN PPS support */ 3197 if (CLK_PPS(parse->peer)) 3198 { 3199 int i = 1; 3200 3201 if (ioctl(parse->ppsfd, TIOCSPPS, (caddr_t)&i) == 0) 3202 { 3203 parse->flags |= PARSE_PPSCLOCK; 3204 } 3205 } 3206 #endif 3207 3208 /* 3209 * PPS via PPSAPI 3210 */ 3211 #if defined(HAVE_PPSAPI) 3212 parse->hardppsstate = PARSE_HARDPPS_DISABLE; 3213 if (CLK_PPS(parse->peer)) 3214 { 3215 if (!refclock_ppsapi(parse->ppsfd, &parse->atom)) 3216 { 3217 msyslog(LOG_NOTICE, "PARSE receiver #%d: parse_start: could not set up PPS: %m", CLK_UNIT(parse->peer)); 3218 } 3219 else 3220 { 3221 parse_ppsapi(parse); 3222 } 3223 } 3224 #endif 3225 3226 if (TTY_SETATTR(fd232, &tio) == -1) 3227 { 3228 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: tcsetattr(%d, &tio): %m", unit, fd232); 3229 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3230 return 0; 3231 } 3232 } 3233 3234 /* 3235 * pick correct input machine 3236 */ 3237 parse->generic->io.srcclock = peer; 3238 parse->generic->io.datalen = 0; 3239 3240 parse->binding = init_iobinding(parse); 3241 3242 if (parse->binding == (bind_t *)0) 3243 { 3244 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: io sub system initialisation failed.", CLK_UNIT(parse->peer)); 3245 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3246 return 0; /* well, ok - special initialisation broke */ 3247 } 3248 3249 parse->generic->io.clock_recv = parse->binding->bd_receive; /* pick correct receive routine */ 3250 parse->generic->io.io_input = parse->binding->bd_io_input; /* pick correct input routine */ 3251 3252 /* 3253 * as we always(?) get 8 bit chars we want to be 3254 * sure, that the upper bits are zero for less 3255 * than 8 bit I/O - so we pass that information on. 3256 * note that there can be only one bit count format 3257 * per file descriptor 3258 */ 3259 3260 switch (tio.c_cflag & CSIZE) 3261 { 3262 case CS5: 3263 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS5; 3264 break; 3265 3266 case CS6: 3267 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS6; 3268 break; 3269 3270 case CS7: 3271 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS7; 3272 break; 3273 3274 case CS8: 3275 tmp_ctl.parsesetcs.parse_cs = PARSE_IO_CS8; 3276 break; 3277 } 3278 3279 if (!PARSE_SETCS(parse, &tmp_ctl)) 3280 { 3281 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setcs() FAILED.", unit); 3282 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3283 return 0; /* well, ok - special initialisation broke */ 3284 } 3285 3286 strlcpy(tmp_ctl.parseformat.parse_buffer, parse->parse_type->cl_format, sizeof(tmp_ctl.parseformat.parse_buffer)); 3287 tmp_ctl.parseformat.parse_count = (u_short) strlen(tmp_ctl.parseformat.parse_buffer); 3288 3289 if (!PARSE_SETFMT(parse, &tmp_ctl)) 3290 { 3291 msyslog(LOG_ERR, "PARSE receiver #%d: parse_start: parse_setfmt() FAILED.", unit); 3292 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3293 return 0; /* well, ok - special initialisation broke */ 3294 } 3295 3296 /* 3297 * get rid of all IO accumulated so far 3298 */ 3299 #ifdef HAVE_TERMIOS 3300 (void) tcflush(parse->generic->io.fd, TCIOFLUSH); 3301 #else 3302 #if defined(TCFLSH) && defined(TCIOFLUSH) 3303 { 3304 int flshcmd = TCIOFLUSH; 3305 3306 (void) ioctl(parse->generic->io.fd, TCFLSH, (caddr_t)&flshcmd); 3307 } 3308 #endif 3309 #endif 3310 3311 /* 3312 * try to do any special initializations 3313 */ 3314 if (parse->parse_type->cl_init) 3315 { 3316 if (parse->parse_type->cl_init(parse)) 3317 { 3318 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3319 return 0; /* well, ok - special initialisation broke */ 3320 } 3321 } 3322 3323 /* 3324 * Insert in async io device list. 3325 */ 3326 if (!io_addclock(&parse->generic->io)) 3327 { 3328 msyslog(LOG_ERR, 3329 "PARSE receiver #%d: parse_start: addclock %s fails (ABORT - clock type requires async io)", CLK_UNIT(parse->peer), parsedev); 3330 parse_shutdown(CLK_UNIT(parse->peer), peer); /* let our cleaning staff do the work */ 3331 return 0; 3332 } 3333 3334 /* 3335 * print out configuration 3336 */ 3337 NLOG(NLOG_CLOCKINFO) 3338 { 3339 /* conditional if clause for conditional syslog */ 3340 msyslog(LOG_INFO, "PARSE receiver #%d: reference clock \"%s\" (I/O device %s, PPS device %s) added", 3341 CLK_UNIT(parse->peer), 3342 parse->parse_type->cl_description, parsedev, 3343 (parse->ppsfd != parse->generic->io.fd) ? parseppsdev : parsedev); 3344 3345 msyslog(LOG_INFO, "PARSE receiver #%d: Stratum %d, trust time %s, precision %d", 3346 CLK_UNIT(parse->peer), 3347 parse->peer->stratum, 3348 l_mktime(parse->maxunsync), parse->peer->precision); 3349 3350 msyslog(LOG_INFO, "PARSE receiver #%d: rootdelay %.6f s, phase adjustment %.6f s, PPS phase adjustment %.6f s, %s IO handling", 3351 CLK_UNIT(parse->peer), 3352 parse->parse_type->cl_rootdelay, 3353 parse->generic->fudgetime1, 3354 parse->ppsphaseadjust, 3355 parse->binding->bd_description); 3356 3357 msyslog(LOG_INFO, "PARSE receiver #%d: Format recognition: %s", CLK_UNIT(parse->peer), 3358 parse->parse_type->cl_format); 3359 msyslog(LOG_INFO, "PARSE receiver #%d: %sPPS support%s", CLK_UNIT(parse->peer), 3360 CLK_PPS(parse->peer) ? "" : "NO ", 3361 CLK_PPS(parse->peer) ? 3362 #ifdef PPS_METHOD 3363 " (implementation " PPS_METHOD ")" 3364 #else 3365 "" 3366 #endif 3367 : "" 3368 ); 3369 } 3370 3371 return 1; 3372 } 3373 3374 /*-------------------------------------------------- 3375 * parse_ctl - process changes on flags/time values 3376 */ 3377 static void 3378 parse_ctl( 3379 struct parseunit *parse, 3380 const struct refclockstat *in 3381 ) 3382 { 3383 if (in) 3384 { 3385 if (in->haveflags & (CLK_HAVEFLAG1|CLK_HAVEFLAG2|CLK_HAVEFLAG3|CLK_HAVEFLAG4)) 3386 { 3387 u_char mask = CLK_FLAG1|CLK_FLAG2|CLK_FLAG3|CLK_FLAG4; 3388 parse->flags = (parse->flags & (u_char)(~mask)) | (in->flags & mask); 3389 #if defined(HAVE_PPSAPI) 3390 if (CLK_PPS(parse->peer)) 3391 { 3392 parse_ppsapi(parse); 3393 } 3394 #endif 3395 } 3396 3397 if (in->haveflags & CLK_HAVETIME1) 3398 { 3399 parse->generic->fudgetime1 = in->fudgetime1; 3400 msyslog(LOG_INFO, "PARSE receiver #%d: new phase adjustment %.6f s", 3401 CLK_UNIT(parse->peer), 3402 parse->generic->fudgetime1); 3403 } 3404 3405 if (in->haveflags & CLK_HAVETIME2) 3406 { 3407 parse->generic->fudgetime2 = in->fudgetime2; 3408 if (parse->flags & PARSE_TRUSTTIME) 3409 { 3410 parse->maxunsync = (u_long)ABS(in->fudgetime2); 3411 msyslog(LOG_INFO, "PARSE receiver #%d: new trust time %s", 3412 CLK_UNIT(parse->peer), 3413 l_mktime(parse->maxunsync)); 3414 } 3415 else 3416 { 3417 parse->ppsphaseadjust = in->fudgetime2; 3418 msyslog(LOG_INFO, "PARSE receiver #%d: new PPS phase adjustment %.6f s", 3419 CLK_UNIT(parse->peer), 3420 parse->ppsphaseadjust); 3421 #if defined(HAVE_PPSAPI) 3422 if (CLK_PPS(parse->peer)) 3423 { 3424 parse_ppsapi(parse); 3425 } 3426 #endif 3427 } 3428 } 3429 } 3430 } 3431 3432 /*-------------------------------------------------- 3433 * parse_poll - called by the transmit procedure 3434 */ 3435 static void 3436 parse_poll( 3437 int unit, 3438 struct peer *peer 3439 ) 3440 { 3441 struct parseunit *parse = peer->procptr->unitptr; 3442 3443 if (peer != parse->peer) 3444 { 3445 msyslog(LOG_ERR, 3446 "PARSE receiver #%d: poll: INTERNAL: peer incorrect", 3447 unit); 3448 return; 3449 } 3450 3451 /* 3452 * Update clock stat counters 3453 */ 3454 parse->generic->polls++; 3455 3456 if (parse->pollneeddata && 3457 ((int)(current_time - parse->pollneeddata) > (1<<(max(min(parse->peer->hpoll, parse->peer->ppoll), parse->peer->minpoll))))) 3458 { 3459 /* 3460 * start worrying when exceeding a poll inteval 3461 * bad news - didn't get a response last time 3462 */ 3463 parse->lastmissed = current_time; 3464 parse_event(parse, CEVNT_TIMEOUT); 3465 3466 ERR(ERR_NODATA) 3467 msyslog(LOG_WARNING, "PARSE receiver #%d: no data from device within poll interval (check receiver / wiring)", CLK_UNIT(parse->peer)); 3468 } 3469 3470 /* 3471 * we just mark that we want the next sample for the clock filter 3472 */ 3473 parse->pollneeddata = current_time; 3474 3475 if (parse->parse_type->cl_poll) 3476 { 3477 parse->parse_type->cl_poll(parse); 3478 } 3479 3480 cparse_statistics(parse); 3481 3482 return; 3483 } 3484 3485 #define LEN_STATES 300 /* length of state string */ 3486 3487 /*-------------------------------------------------- 3488 * parse_control - set fudge factors, return statistics 3489 */ 3490 static void 3491 parse_control( 3492 int unit, 3493 const struct refclockstat *in, 3494 struct refclockstat *out, 3495 struct peer *peer 3496 ) 3497 { 3498 struct parseunit *parse = peer->procptr->unitptr; 3499 parsectl_t tmpctl; 3500 3501 static char outstatus[400]; /* status output buffer */ 3502 3503 if (out) 3504 { 3505 out->lencode = 0; 3506 out->p_lastcode = 0; 3507 out->kv_list = (struct ctl_var *)0; 3508 } 3509 3510 if (!parse || !parse->peer) 3511 { 3512 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: unit invalid (UNIT INACTIVE)", 3513 unit); 3514 return; 3515 } 3516 3517 unit = CLK_UNIT(parse->peer); 3518 3519 /* 3520 * handle changes 3521 */ 3522 parse_ctl(parse, in); 3523 3524 /* 3525 * supply data 3526 */ 3527 if (out) 3528 { 3529 u_long sum = 0; 3530 char *tt, *start; 3531 int i; 3532 3533 outstatus[0] = '\0'; 3534 3535 out->type = REFCLK_PARSE; 3536 3537 /* 3538 * keep fudgetime2 in sync with TRUSTTIME/MAXUNSYNC flag1 3539 */ 3540 parse->generic->fudgetime2 = (parse->flags & PARSE_TRUSTTIME) ? (double)parse->maxunsync : parse->ppsphaseadjust; 3541 3542 /* 3543 * figure out skew between PPS and RS232 - just for informational 3544 * purposes 3545 */ 3546 if (PARSE_SYNC(parse->timedata.parse_state)) 3547 { 3548 if (PARSE_PPS(parse->timedata.parse_state) && PARSE_TIMECODE(parse->timedata.parse_state)) 3549 { 3550 l_fp off; 3551 3552 /* 3553 * we have a PPS and RS232 signal - calculate the skew 3554 * WARNING: assumes on TIMECODE == PULSE (timecode after pulse) 3555 */ 3556 off = parse->timedata.parse_stime.fp; 3557 L_SUB(&off, &parse->timedata.parse_ptime.fp); /* true offset */ 3558 tt = add_var(&out->kv_list, 80, RO); 3559 snprintf(tt, 80, "refclock_ppsskew=%s", lfptoms(&off, 6)); 3560 } 3561 } 3562 3563 if (PARSE_PPS(parse->timedata.parse_state)) 3564 { 3565 tt = add_var(&out->kv_list, 80, RO|DEF); 3566 snprintf(tt, 80, "refclock_ppstime=\"%s\"", gmprettydate(&parse->timedata.parse_ptime.fp)); 3567 } 3568 3569 start = tt = add_var(&out->kv_list, 128, RO|DEF); 3570 tt = ap(start, 128, tt, "refclock_time=\""); 3571 3572 if (parse->timedata.parse_time.fp.l_ui == 0) 3573 { 3574 tt = ap(start, 128, tt, "<UNDEFINED>\""); 3575 } 3576 else 3577 { 3578 tt = ap(start, 128, tt, "%s\"", 3579 gmprettydate(&parse->timedata.parse_time.fp)); 3580 } 3581 3582 if (!PARSE_GETTIMECODE(parse, &tmpctl)) 3583 { 3584 ERR(ERR_INTERNAL) 3585 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_timecode() FAILED", unit); 3586 } 3587 else 3588 { 3589 start = tt = add_var(&out->kv_list, 512, RO|DEF); 3590 tt = ap(start, 512, tt, "refclock_status=\""); 3591 3592 /* 3593 * copy PPS flags from last read transaction (informational only) 3594 */ 3595 tmpctl.parsegettc.parse_state |= parse->timedata.parse_state & 3596 (PARSEB_PPS|PARSEB_S_PPS); 3597 3598 (void)parsestate(tmpctl.parsegettc.parse_state, tt, BUFFER_SIZES(start, tt, 512)); 3599 3600 tt += strlen(tt); 3601 3602 tt = ap(start, 512, tt, "\""); 3603 3604 if (tmpctl.parsegettc.parse_count) 3605 mkascii(outstatus+strlen(outstatus), (int)(sizeof(outstatus)- strlen(outstatus) - 1), 3606 tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count)); 3607 3608 } 3609 3610 tmpctl.parseformat.parse_format = tmpctl.parsegettc.parse_format; 3611 3612 if (!PARSE_GETFMT(parse, &tmpctl)) 3613 { 3614 ERR(ERR_INTERNAL) 3615 msyslog(LOG_ERR, "PARSE receiver #%d: parse_control: parse_getfmt() FAILED", unit); 3616 } 3617 else 3618 { 3619 int count = tmpctl.parseformat.parse_count - 1; 3620 3621 start = tt = add_var(&out->kv_list, 80, RO|DEF); 3622 tt = ap(start, 80, tt, "refclock_format=\""); 3623 3624 if (count > 0) { 3625 tt = ap(start, 80, tt, "%*.*s", 3626 count, 3627 count, 3628 tmpctl.parseformat.parse_buffer); 3629 } 3630 3631 tt = ap(start, 80, tt, "\""); 3632 } 3633 3634 /* 3635 * gather state statistics 3636 */ 3637 3638 start = tt = add_var(&out->kv_list, LEN_STATES, RO|DEF); 3639 tt = ap(start, LEN_STATES, tt, "refclock_states=\""); 3640 3641 for (i = 0; i <= CEVNT_MAX; i++) 3642 { 3643 u_long s_time; 3644 u_long d = current_time - parse->generic->timestarted; 3645 u_long percent; 3646 3647 percent = s_time = PARSE_STATETIME(parse, i); 3648 3649 while (((u_long)(~0) / 10000) < percent) 3650 { 3651 percent /= 10; 3652 d /= 10; 3653 } 3654 3655 if (d) 3656 percent = (percent * 10000) / d; 3657 else 3658 percent = 10000; 3659 3660 if (s_time) 3661 { 3662 char item[80]; 3663 int count; 3664 3665 snprintf(item, 80, "%s%s%s: %s (%d.%02d%%)", 3666 sum ? "; " : "", 3667 (parse->generic->currentstatus == i) ? "*" : "", 3668 clockstatus((unsigned int)i), 3669 l_mktime(s_time), 3670 (int)(percent / 100), (int)(percent % 100)); 3671 if ((count = (int) strlen(item)) < (LEN_STATES - 40 - (tt - start))) 3672 { 3673 tt = ap(start, LEN_STATES, tt, 3674 "%s", item); 3675 } 3676 sum += s_time; 3677 } 3678 } 3679 3680 tt = ap(start, LEN_STATES, tt, 3681 "; running time: %s\"", l_mktime(sum)); 3682 3683 tt = add_var(&out->kv_list, 32, RO); 3684 snprintf(tt, 32, "refclock_id=\"%s\"", parse->parse_type->cl_id); 3685 3686 tt = add_var(&out->kv_list, 80, RO); 3687 snprintf(tt, 80, "refclock_iomode=\"%s\"", parse->binding->bd_description); 3688 3689 tt = add_var(&out->kv_list, 128, RO); 3690 snprintf(tt, 128, "refclock_driver_version=\"%s\"", rcsid); 3691 3692 { 3693 struct ctl_var *k; 3694 3695 k = parse->kv; 3696 while (k && !(k->flags & EOV)) 3697 { 3698 set_var(&out->kv_list, k->text, strlen(k->text)+1, k->flags); 3699 k++; 3700 } 3701 } 3702 3703 out->lencode = (u_short) strlen(outstatus); 3704 out->p_lastcode = outstatus; 3705 } 3706 } 3707 3708 /**=========================================================================== 3709 ** processing routines 3710 **/ 3711 3712 /*-------------------------------------------------- 3713 * event handling - note that nominal events will also be posted 3714 * keep track of state dwelling times 3715 */ 3716 static void 3717 parse_event( 3718 struct parseunit *parse, 3719 int event 3720 ) 3721 { 3722 if (parse->generic->currentstatus != (u_char) event) 3723 { 3724 parse->statetime[parse->generic->currentstatus] += current_time - parse->lastchange; 3725 parse->lastchange = current_time; 3726 3727 if (parse->parse_type->cl_event) 3728 parse->parse_type->cl_event(parse, event); 3729 3730 if (event == CEVNT_NOMINAL) 3731 { 3732 NLOG(NLOG_CLOCKSTATUS) 3733 msyslog(LOG_INFO, "PARSE receiver #%d: SYNCHRONIZED", 3734 CLK_UNIT(parse->peer)); 3735 } 3736 3737 refclock_report(parse->peer, event); 3738 } 3739 } 3740 3741 /*-------------------------------------------------- 3742 * process a PARSE time sample 3743 */ 3744 static void 3745 parse_process( 3746 struct parseunit *parse, 3747 parsetime_t *parsetime 3748 ) 3749 { 3750 l_fp off, rectime, reftime; 3751 double fudge; 3752 3753 /* silence warning: 'off.Ul_i.Xl_i' may be used uninitialized in this function */ 3754 ZERO(off); 3755 3756 /* 3757 * check for changes in conversion status 3758 * (only one for each new status !) 3759 */ 3760 if (((parsetime->parse_status & CVT_MASK) != CVT_OK) && 3761 ((parsetime->parse_status & CVT_MASK) != CVT_NONE) && 3762 (parse->timedata.parse_status != parsetime->parse_status)) 3763 { 3764 char buffer[400]; 3765 3766 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3767 msyslog(LOG_WARNING, "PARSE receiver #%d: conversion status \"%s\"", 3768 CLK_UNIT(parse->peer), parsestatus(parsetime->parse_status, buffer, sizeof(buffer))); 3769 3770 if ((parsetime->parse_status & CVT_MASK) == CVT_FAIL) 3771 { 3772 /* 3773 * tell more about the story - list time code 3774 * there is a slight change for a race condition and 3775 * the time code might be overwritten by the next packet 3776 */ 3777 parsectl_t tmpctl; 3778 3779 if (!PARSE_GETTIMECODE(parse, &tmpctl)) 3780 { 3781 ERR(ERR_INTERNAL) 3782 msyslog(LOG_ERR, "PARSE receiver #%d: parse_process: parse_timecode() FAILED", CLK_UNIT(parse->peer)); 3783 } 3784 else 3785 { 3786 ERR(ERR_BADDATA) 3787 msyslog(LOG_WARNING, "PARSE receiver #%d: FAILED TIMECODE: \"%s\" (check receiver configuration / wiring)", 3788 CLK_UNIT(parse->peer), mkascii(buffer, sizeof buffer, tmpctl.parsegettc.parse_buffer, (unsigned)(tmpctl.parsegettc.parse_count - 1))); 3789 } 3790 /* copy status to show only changes in case of failures */ 3791 parse->timedata.parse_status = parsetime->parse_status; 3792 } 3793 } 3794 3795 /* 3796 * examine status and post appropriate events 3797 */ 3798 if ((parsetime->parse_status & CVT_MASK) != CVT_OK) 3799 { 3800 /* 3801 * got bad data - tell the rest of the system 3802 */ 3803 switch (parsetime->parse_status & CVT_MASK) 3804 { 3805 case CVT_NONE: 3806 if ((parsetime->parse_status & CVT_ADDITIONAL) && 3807 parse->parse_type->cl_message) 3808 parse->parse_type->cl_message(parse, parsetime); 3809 /* 3810 * save PPS information that comes piggyback 3811 */ 3812 if (PARSE_PPS(parsetime->parse_state)) 3813 { 3814 parse->timedata.parse_state |= PARSEB_PPS|PARSEB_S_PPS; 3815 parse->timedata.parse_ptime = parsetime->parse_ptime; 3816 } 3817 break; /* well, still waiting - timeout is handled at higher levels */ 3818 3819 case CVT_FAIL: 3820 if (parsetime->parse_status & CVT_BADFMT) 3821 { 3822 parse_event(parse, CEVNT_BADREPLY); 3823 } 3824 else 3825 if (parsetime->parse_status & CVT_BADDATE) 3826 { 3827 parse_event(parse, CEVNT_BADDATE); 3828 } 3829 else 3830 if (parsetime->parse_status & CVT_BADTIME) 3831 { 3832 parse_event(parse, CEVNT_BADTIME); 3833 } 3834 else 3835 { 3836 parse_event(parse, CEVNT_BADREPLY); /* for the lack of something better */ 3837 } 3838 } 3839 return; /* skip the rest - useless */ 3840 } 3841 3842 /* 3843 * check for format changes 3844 * (in case somebody has swapped clocks 8-) 3845 */ 3846 if (parse->lastformat != parsetime->parse_format) 3847 { 3848 parsectl_t tmpctl; 3849 3850 tmpctl.parseformat.parse_format = parsetime->parse_format; 3851 3852 if (!PARSE_GETFMT(parse, &tmpctl)) 3853 { 3854 ERR(ERR_INTERNAL) 3855 msyslog(LOG_ERR, "PARSE receiver #%d: parse_getfmt() FAILED", CLK_UNIT(parse->peer)); 3856 } 3857 else 3858 { 3859 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3860 msyslog(LOG_INFO, "PARSE receiver #%d: packet format \"%s\"", 3861 CLK_UNIT(parse->peer), tmpctl.parseformat.parse_buffer); 3862 } 3863 parse->lastformat = parsetime->parse_format; 3864 } 3865 3866 /* 3867 * now, any changes ? 3868 */ 3869 if ((parse->timedata.parse_state ^ parsetime->parse_state) & 3870 ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS)) 3871 { 3872 char tmp1[200]; 3873 char tmp2[200]; 3874 /* 3875 * something happend - except for PPS events 3876 */ 3877 3878 (void) parsestate(parsetime->parse_state, tmp1, sizeof(tmp1)); 3879 (void) parsestate(parse->timedata.parse_state, tmp2, sizeof(tmp2)); 3880 3881 NLOG(NLOG_CLOCKINFO) /* conditional if clause for conditional syslog */ 3882 msyslog(LOG_INFO,"PARSE receiver #%d: STATE CHANGE: %s -> %s", 3883 CLK_UNIT(parse->peer), tmp2, tmp1); 3884 } 3885 3886 /* 3887 * carry on PPS information if still usable 3888 */ 3889 if (PARSE_PPS(parse->timedata.parse_state) && !PARSE_PPS(parsetime->parse_state)) 3890 { 3891 parsetime->parse_state |= PARSEB_PPS|PARSEB_S_PPS; 3892 parsetime->parse_ptime = parse->timedata.parse_ptime; 3893 } 3894 3895 /* 3896 * remember for future 3897 */ 3898 parse->timedata = *parsetime; 3899 3900 /* 3901 * check to see, whether the clock did a complete powerup or lost PZF signal 3902 * and post correct events for current condition 3903 */ 3904 if (PARSE_POWERUP(parsetime->parse_state)) 3905 { 3906 /* 3907 * this is bad, as we have completely lost synchronisation 3908 * well this is a problem with the receiver here 3909 * for PARSE Meinberg DCF77 receivers the lost synchronisation 3910 * is true as it is the powerup state and the time is taken 3911 * from a crude real time clock chip 3912 * for the PZF/GPS series this is only partly true, as 3913 * PARSE_POWERUP only means that the pseudo random 3914 * phase shift sequence cannot be found. this is only 3915 * bad, if we have never seen the clock in the SYNC 3916 * state, where the PHASE and EPOCH are correct. 3917 * for reporting events the above business does not 3918 * really matter, but we can use the time code 3919 * even in the POWERUP state after having seen 3920 * the clock in the synchronized state (PZF class 3921 * receivers) unless we have had a telegram disruption 3922 * after having seen the clock in the SYNC state. we 3923 * thus require having seen the clock in SYNC state 3924 * *after* having missed telegrams (noresponse) from 3925 * the clock. one problem remains: we might use erroneously 3926 * POWERUP data if the disruption is shorter than 1 polling 3927 * interval. fortunately powerdowns last usually longer than 64 3928 * seconds and the receiver is at least 2 minutes in the 3929 * POWERUP or NOSYNC state before switching to SYNC 3930 * for GPS receivers this can mean antenna problems and other causes. 3931 * the additional grace period can be enables by a clock 3932 * mode having the PARSE_F_POWERUPTRUST flag in cl_flag set. 3933 */ 3934 parse_event(parse, CEVNT_FAULT); 3935 NLOG(NLOG_CLOCKSTATUS) 3936 ERR(ERR_BADSTATUS) 3937 msyslog(LOG_ERR,"PARSE receiver #%d: NOT SYNCHRONIZED/RECEIVER PROBLEMS", 3938 CLK_UNIT(parse->peer)); 3939 } 3940 else 3941 { 3942 /* 3943 * we have two states left 3944 * 3945 * SYNC: 3946 * this state means that the EPOCH (timecode) and PHASE 3947 * information has be read correctly (at least two 3948 * successive PARSE timecodes were received correctly) 3949 * this is the best possible state - full trust 3950 * 3951 * NOSYNC: 3952 * The clock should be on phase with respect to the second 3953 * signal, but the timecode has not been received correctly within 3954 * at least the last two minutes. this is a sort of half baked state 3955 * for PARSE Meinberg DCF77 clocks this is bad news (clock running 3956 * without timecode confirmation) 3957 * PZF 535 has also no time confirmation, but the phase should be 3958 * very precise as the PZF signal can be decoded 3959 */ 3960 3961 if (PARSE_SYNC(parsetime->parse_state)) 3962 { 3963 /* 3964 * currently completely synchronized - best possible state 3965 */ 3966 parse->lastsync = current_time; 3967 clear_err(parse, ERR_BADSTATUS); 3968 } 3969 else 3970 { 3971 /* 3972 * we have had some problems receiving the time code 3973 */ 3974 parse_event(parse, CEVNT_PROP); 3975 NLOG(NLOG_CLOCKSTATUS) 3976 ERR(ERR_BADSTATUS) 3977 msyslog(LOG_ERR,"PARSE receiver #%d: TIMECODE NOT CONFIRMED", 3978 CLK_UNIT(parse->peer)); 3979 } 3980 } 3981 3982 fudge = parse->generic->fudgetime1; /* standard RS232 Fudgefactor */ 3983 3984 if (PARSE_TIMECODE(parsetime->parse_state)) 3985 { 3986 rectime = parsetime->parse_stime.fp; 3987 off = reftime = parsetime->parse_time.fp; 3988 3989 L_SUB(&off, &rectime); /* prepare for PPS adjustments logic */ 3990 3991 #ifdef DEBUG 3992 if (debug > 3) 3993 printf("PARSE receiver #%d: Reftime %s, Recvtime %s - initial offset %s\n", 3994 CLK_UNIT(parse->peer), 3995 prettydate(&reftime), 3996 prettydate(&rectime), 3997 lfptoa(&off,6)); 3998 #endif 3999 } 4000 4001 if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) 4002 { 4003 l_fp offset; 4004 double ppsphaseadjust = parse->ppsphaseadjust; 4005 4006 #ifdef HAVE_PPSAPI 4007 /* 4008 * set fudge = 0.0 if already included in PPS time stamps 4009 */ 4010 if (parse->atom.pps_params.mode & (PPS_OFFSETCLEAR|PPS_OFFSETASSERT)) 4011 { 4012 ppsphaseadjust = 0.0; 4013 } 4014 #endif 4015 4016 /* 4017 * we have a PPS signal - much better than the RS232 stuff (we hope) 4018 */ 4019 offset = parsetime->parse_ptime.fp; 4020 4021 #ifdef DEBUG 4022 if (debug > 3) 4023 printf("PARSE receiver #%d: PPStime %s\n", 4024 CLK_UNIT(parse->peer), 4025 prettydate(&offset)); 4026 #endif 4027 if (PARSE_TIMECODE(parsetime->parse_state)) 4028 { 4029 if (M_ISGEQ(off.l_i, off.l_uf, -1, 0x80000000) && 4030 M_ISGEQ(0, 0x7fffffff, off.l_i, off.l_uf)) 4031 { 4032 fudge = ppsphaseadjust; /* pick PPS fudge factor */ 4033 4034 /* 4035 * RS232 offsets within [-0.5..0.5[ - take PPS offsets 4036 */ 4037 4038 if (parse->parse_type->cl_flags & PARSE_F_PPSONSECOND) 4039 { 4040 reftime = off = offset; 4041 if (reftime.l_uf & 0x80000000) 4042 reftime.l_ui++; 4043 reftime.l_uf = 0; 4044 4045 4046 /* 4047 * implied on second offset 4048 */ 4049 off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ 4050 off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ 4051 } 4052 else 4053 { 4054 /* 4055 * time code describes pulse 4056 */ 4057 reftime = off = parsetime->parse_time.fp; 4058 4059 L_SUB(&off, &offset); /* true offset */ 4060 } 4061 } 4062 /* 4063 * take RS232 offset when PPS when out of bounds 4064 */ 4065 } 4066 else 4067 { 4068 fudge = ppsphaseadjust; /* pick PPS fudge factor */ 4069 /* 4070 * Well, no time code to guide us - assume on second pulse 4071 * and pray, that we are within [-0.5..0.5[ 4072 */ 4073 off = offset; 4074 reftime = offset; 4075 if (reftime.l_uf & 0x80000000) 4076 reftime.l_ui++; 4077 reftime.l_uf = 0; 4078 /* 4079 * implied on second offset 4080 */ 4081 off.l_uf = ~off.l_uf; /* map [0.5..1[ -> [-0.5..0[ */ 4082 off.l_i = (off.l_uf & 0x80000000) ? -1 : 0; /* sign extend */ 4083 } 4084 } 4085 else 4086 { 4087 if (!PARSE_TIMECODE(parsetime->parse_state)) 4088 { 4089 /* 4090 * Well, no PPS, no TIMECODE, no more work ... 4091 */ 4092 if ((parsetime->parse_status & CVT_ADDITIONAL) && 4093 parse->parse_type->cl_message) 4094 parse->parse_type->cl_message(parse, parsetime); 4095 return; 4096 } 4097 } 4098 4099 #ifdef DEBUG 4100 if (debug > 3) 4101 printf("PARSE receiver #%d: Reftime %s, Recvtime %s - final offset %s\n", 4102 CLK_UNIT(parse->peer), 4103 prettydate(&reftime), 4104 prettydate(&rectime), 4105 lfptoa(&off,6)); 4106 #endif 4107 4108 4109 rectime = reftime; 4110 L_SUB(&rectime, &off); /* just to keep the ntp interface happy */ 4111 4112 #ifdef DEBUG 4113 if (debug > 3) 4114 printf("PARSE receiver #%d: calculated Reftime %s, Recvtime %s\n", 4115 CLK_UNIT(parse->peer), 4116 prettydate(&reftime), 4117 prettydate(&rectime)); 4118 #endif 4119 4120 if ((parsetime->parse_status & CVT_ADDITIONAL) && 4121 parse->parse_type->cl_message) 4122 parse->parse_type->cl_message(parse, parsetime); 4123 4124 if (PARSE_SYNC(parsetime->parse_state)) 4125 { 4126 /* 4127 * log OK status 4128 */ 4129 parse_event(parse, CEVNT_NOMINAL); 4130 } 4131 4132 clear_err(parse, ERR_BADIO); 4133 clear_err(parse, ERR_BADDATA); 4134 clear_err(parse, ERR_NODATA); 4135 clear_err(parse, ERR_INTERNAL); 4136 4137 /* 4138 * and now stick it into the clock machine 4139 * samples are only valid iff lastsync is not too old and 4140 * we have seen the clock in sync at least once 4141 * after the last time we didn't see an expected data telegram 4142 * at startup being not in sync is also bad just like 4143 * POWERUP state unless PARSE_F_POWERUPTRUST is set 4144 * see the clock states section above for more reasoning 4145 */ 4146 if (((current_time - parse->lastsync) > parse->maxunsync) || 4147 (parse->lastsync < parse->lastmissed) || 4148 ((parse->lastsync == 0) && !PARSE_SYNC(parsetime->parse_state)) || 4149 (((parse->parse_type->cl_flags & PARSE_F_POWERUPTRUST) == 0) && 4150 PARSE_POWERUP(parsetime->parse_state))) 4151 { 4152 parse->generic->leap = LEAP_NOTINSYNC; 4153 parse->lastsync = 0; /* wait for full sync again */ 4154 } 4155 else 4156 { 4157 if (PARSE_LEAPADD(parsetime->parse_state)) 4158 { 4159 /* 4160 * we pick this state also for time code that pass leap warnings 4161 * without direction information (as earth is currently slowing 4162 * down). 4163 */ 4164 parse->generic->leap = (parse->flags & PARSE_LEAP_DELETE) ? LEAP_DELSECOND : LEAP_ADDSECOND; 4165 } 4166 else 4167 if (PARSE_LEAPDEL(parsetime->parse_state)) 4168 { 4169 parse->generic->leap = LEAP_DELSECOND; 4170 } 4171 else 4172 { 4173 parse->generic->leap = LEAP_NOWARNING; 4174 } 4175 } 4176 4177 if (parse->generic->leap != LEAP_NOTINSYNC) 4178 { 4179 /* 4180 * only good/trusted samples are interesting 4181 */ 4182 #ifdef DEBUG 4183 if (debug > 2) 4184 { 4185 printf("PARSE receiver #%d: refclock_process_offset(reftime=%s, rectime=%s, Fudge=%f)\n", 4186 CLK_UNIT(parse->peer), 4187 prettydate(&reftime), 4188 prettydate(&rectime), 4189 fudge); 4190 } 4191 #endif 4192 parse->generic->lastref = reftime; 4193 4194 refclock_process_offset(parse->generic, reftime, rectime, fudge); 4195 4196 #ifdef HAVE_PPSAPI 4197 /* 4198 * pass PPS information on to PPS clock 4199 */ 4200 if (PARSE_PPS(parsetime->parse_state) && CLK_PPS(parse->peer)) 4201 { 4202 parse->peer->flags |= (FLAG_PPS | FLAG_TSTAMP_PPS); 4203 parse_hardpps(parse, PARSE_HARDPPS_ENABLE); 4204 } 4205 #endif 4206 } else { 4207 parse_hardpps(parse, PARSE_HARDPPS_DISABLE); 4208 parse->peer->flags &= ~(FLAG_PPS | FLAG_TSTAMP_PPS); 4209 } 4210 4211 /* 4212 * ready, unless the machine wants a sample or 4213 * we are in fast startup mode (peer->dist > MAXDISTANCE) 4214 */ 4215 if (!parse->pollneeddata && parse->peer->disp <= MAXDISTANCE) 4216 return; 4217 4218 parse->pollneeddata = 0; 4219 4220 parse->timedata.parse_state &= ~(unsigned)(PARSEB_PPS|PARSEB_S_PPS); 4221 4222 refclock_receive(parse->peer); 4223 } 4224 4225 /**=========================================================================== 4226 ** special code for special clocks 4227 **/ 4228 4229 static void 4230 mk_utcinfo( 4231 char *t, // pointer to the output string buffer 4232 int swnt, 4233 int swnlsf, 4234 int dn, 4235 int dtls, 4236 int dtlsf, 4237 int size // size of the output string buffer 4238 ) 4239 { 4240 unsigned int wnt = swnt; 4241 unsigned int wnlsf = swnlsf; 4242 /* 4243 * The week number transmitted by the GPS satellites for the leap date 4244 * is truncated to 8 bits only. If the nearest leap second date is off 4245 * the current date by more than +/- 128 weeks then conversion to a 4246 * calendar date is ambiguous. On the other hand, if a leap second is 4247 * currently being announced (i.e. dtlsf != dtls) then the week number 4248 * wnlsf is close enough, and we can unambiguously determine the date 4249 * for which the leap second is scheduled. 4250 */ 4251 if ( dtlsf != dtls ) 4252 { 4253 time_t t_ls; 4254 struct tm *tm; 4255 int n = 0; 4256 4257 if (wnlsf < GPSWRAP) 4258 wnlsf += GPSWEEKS; 4259 4260 if (wnt < GPSWRAP) 4261 wnt += GPSWEEKS; 4262 4263 t_ls = (time_t) wnlsf * SECSPERWEEK 4264 + (time_t) dn * SECSPERDAY 4265 + GPS_SEC_BIAS - 1; 4266 4267 tm = gmtime( &t_ls ); 4268 if (tm == NULL) // gmtime() failed 4269 { 4270 snprintf( t, size, "** (gmtime() failed in mk_utcinfo())" ); 4271 return; 4272 } 4273 4274 n += snprintf( t, size, "UTC offset transition from %is to %is due to leap second %s", 4275 dtls, dtlsf, ( dtls < dtlsf ) ? "insertion" : "deletion" ); 4276 n += snprintf( t + n, size - n, " at UTC midnight at the end of %s, %04i-%02i-%02i", 4277 daynames[tm->tm_wday], tm->tm_year + 1900, tm->tm_mon + 1, tm->tm_mday ); 4278 } 4279 else 4280 snprintf( t, size, "UTC offset parameter: %is, no leap second announced.\n", dtls ); 4281 4282 } 4283 4284 #ifdef CLOCK_MEINBERG 4285 /**=========================================================================== 4286 ** Meinberg GPS receiver support 4287 **/ 4288 4289 /*------------------------------------------------------------ 4290 * gps16x_message - process messages from Meinberg GPS receiver 4291 */ 4292 static void 4293 gps16x_message( 4294 struct parseunit *parse, 4295 parsetime_t *parsetime 4296 ) 4297 { 4298 if (parse->timedata.parse_msglen && parsetime->parse_msg[0] == SOH) 4299 { 4300 GPS_MSG_HDR header; 4301 unsigned char *bufp = (unsigned char *)parsetime->parse_msg + 1; 4302 4303 #ifdef DEBUG 4304 if (debug > 2) 4305 { 4306 char msgbuffer[600]; 4307 4308 mkreadable(msgbuffer, sizeof(msgbuffer), (char *)parsetime->parse_msg, parsetime->parse_msglen, 1); 4309 printf("PARSE receiver #%d: received message (%d bytes) >%s<\n", 4310 CLK_UNIT(parse->peer), 4311 parsetime->parse_msglen, 4312 msgbuffer); 4313 } 4314 #endif 4315 get_mbg_header(&bufp, &header); 4316 if (header.hdr_csum == mbg_csum(parsetime->parse_msg + 1, 6) && 4317 (header.len == 0 || 4318 (header.len < sizeof(parsetime->parse_msg) && 4319 header.data_csum == mbg_csum(bufp, header.len)))) 4320 { 4321 /* 4322 * clean message 4323 */ 4324 switch (header.cmd) 4325 { 4326 case GPS_SW_REV: 4327 { 4328 char buffer[64]; 4329 SW_REV gps_sw_rev; 4330 4331 get_mbg_sw_rev(&bufp, &gps_sw_rev); 4332 snprintf(buffer, sizeof(buffer), "meinberg_gps_version=\"%x.%02x%s%s\"", 4333 (gps_sw_rev.code >> 8) & 0xFF, 4334 gps_sw_rev.code & 0xFF, 4335 gps_sw_rev.name[0] ? " " : "", 4336 gps_sw_rev.name); 4337 set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); 4338 } 4339 break; 4340 4341 case GPS_BVAR_STAT: 4342 { 4343 static struct state 4344 { 4345 BVAR_STAT flag; /* status flag */ 4346 const char *string; /* bit name */ 4347 } states[] = 4348 { 4349 { BVAR_CFGH_INVALID, "Configuration/Health" }, 4350 { BVAR_ALM_NOT_COMPLETE, "Almanachs" }, 4351 { BVAR_UTC_INVALID, "UTC Correction" }, 4352 { BVAR_IONO_INVALID, "Ionospheric Correction" }, 4353 { BVAR_RCVR_POS_INVALID, "Receiver Position" }, 4354 { 0, "" } 4355 }; 4356 BVAR_STAT status; 4357 struct state *s = states; 4358 char buffer[512]; 4359 char *p, *b; 4360 4361 status = (BVAR_STAT) get_lsb_short(&bufp); 4362 p = b = buffer; 4363 p = ap(buffer, sizeof(buffer), p, 4364 "meinberg_gps_status=\"[0x%04x] ", 4365 status); 4366 4367 if (status) 4368 { 4369 p = ap(buffer, sizeof(buffer), p, "incomplete buffered data: "); 4370 b = p; 4371 while (s->flag) 4372 { 4373 if (status & s->flag) 4374 { 4375 if (p != b) 4376 { 4377 p = ap(buffer, sizeof(buffer), p, ", "); 4378 } 4379 4380 p = ap(buffer, sizeof(buffer), p, "%s", (const char *)s->string); 4381 } 4382 s++; 4383 } 4384 p = ap(buffer, sizeof(buffer), p, "\""); 4385 } 4386 else 4387 { 4388 p = ap(buffer, sizeof(buffer), p, "<all buffered data complete>\""); 4389 } 4390 4391 set_var(&parse->kv, buffer, strlen(buffer)+1, RO|DEF); 4392 } 4393 break; 4394 4395 case GPS_POS_XYZ: 4396 { 4397 XYZ xyz; 4398 char buffer[256]; 4399 4400 get_mbg_xyz(&bufp, xyz); 4401 snprintf(buffer, sizeof(buffer), "gps_position(XYZ)=\"%s m, %s m, %s m\"", 4402 mfptoa(xyz[XP].l_ui, xyz[XP].l_uf, 1), 4403 mfptoa(xyz[YP].l_ui, xyz[YP].l_uf, 1), 4404 mfptoa(xyz[ZP].l_ui, xyz[ZP].l_uf, 1)); 4405 4406 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4407 } 4408 break; 4409 4410 case GPS_POS_LLA: 4411 { 4412 LLA lla; 4413 char buffer[256]; 4414 4415 get_mbg_lla(&bufp, lla); 4416 4417 snprintf(buffer, sizeof(buffer), "gps_position(LLA)=\"%s deg, %s deg, %s m\"", 4418 mfptoa(lla[LAT].l_ui, lla[LAT].l_uf, 4), 4419 mfptoa(lla[LON].l_ui, lla[LON].l_uf, 4), 4420 mfptoa(lla[ALT].l_ui, lla[ALT].l_uf, 1)); 4421 4422 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4423 } 4424 break; 4425 4426 case GPS_TZDL: 4427 break; 4428 4429 case GPS_PORT_PARM: 4430 break; 4431 4432 case GPS_SYNTH: 4433 break; 4434 4435 case GPS_ANT_INFO: 4436 { 4437 ANT_INFO antinfo; 4438 char buffer[512]; 4439 char *p, *q; 4440 4441 get_mbg_antinfo(&bufp, &antinfo); 4442 p = buffer; 4443 p = ap(buffer, sizeof(buffer), p, "meinberg_antenna_status=\""); 4444 switch (antinfo.status) 4445 { 4446 case ANT_INVALID: // No other fields valid since antenna has not yet been disconnected 4447 p = ap(buffer, sizeof(buffer), 4448 p, "<OK>"); 4449 break; 4450 4451 case ANT_DISCONN: // Antenna is disconnected, tm_reconn and delta_t not yet set 4452 q = ap(buffer, sizeof(buffer), 4453 p, "DISCONNECTED since "); 4454 NLOG(NLOG_CLOCKSTATUS) 4455 ERR(ERR_BADSTATUS) 4456 msyslog(LOG_ERR,"PARSE receiver #%d: ANTENNA FAILURE: %s", 4457 CLK_UNIT(parse->peer), p); 4458 4459 p = q; 4460 mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); 4461 *p = '\0'; 4462 break; 4463 4464 case ANT_RECONN: // Antenna had been disconnect, but receiver sync. after reconnect, so all fields valid 4465 p = ap(buffer, sizeof(buffer), 4466 p, "SYNC AFTER RECONNECT on "); 4467 mbg_tm_str(&p, &antinfo.tm_reconn, BUFFER_SIZE(buffer, p), 0); 4468 p = ap(buffer, sizeof(buffer), 4469 p, ", clock offset at reconnect %c%ld.%07ld s, disconnect time ", 4470 (antinfo.delta_t < 0) ? '-' : '+', 4471 (long) ABS(antinfo.delta_t) / 10000, 4472 (long) ABS(antinfo.delta_t) % 10000); 4473 mbg_tm_str(&p, &antinfo.tm_disconn, BUFFER_SIZE(buffer, p), 0); 4474 *p = '\0'; 4475 break; 4476 4477 default: 4478 p = ap(buffer, sizeof(buffer), 4479 p, "bad status 0x%04x", 4480 antinfo.status); 4481 break; 4482 } 4483 4484 p = ap(buffer, sizeof(buffer), p, "\""); 4485 4486 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4487 } 4488 break; 4489 4490 case GPS_UCAP: 4491 break; 4492 4493 case GPS_CFGH: 4494 { 4495 CFGH cfgh; 4496 char buffer[512]; 4497 char *p; 4498 4499 get_mbg_cfgh(&bufp, &cfgh); 4500 if (cfgh.valid) 4501 { 4502 const char *cp; 4503 uint16_t tmp_val; 4504 int i; 4505 4506 p = buffer; 4507 p = ap(buffer, sizeof(buffer), 4508 p, "gps_tot_51=\""); 4509 mbg_tgps_str(&p, &cfgh.tot_51, BUFFER_SIZE(buffer, p)); 4510 p = ap(buffer, sizeof(buffer), 4511 p, "\""); 4512 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4513 4514 p = buffer; 4515 p = ap(buffer, sizeof(buffer), 4516 p, "gps_tot_63=\""); 4517 mbg_tgps_str(&p, &cfgh.tot_63, BUFFER_SIZE(buffer, p)); 4518 p = ap(buffer, sizeof(buffer), 4519 p, "\""); 4520 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4521 4522 p = buffer; 4523 p = ap(buffer, sizeof(buffer), 4524 p, "gps_t0a=\""); 4525 mbg_tgps_str(&p, &cfgh.t0a, BUFFER_SIZE(buffer, p)); 4526 p = ap(buffer, sizeof(buffer), 4527 p, "\""); 4528 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4529 4530 for (i = 0; i < N_SVNO_GPS; i++) 4531 { 4532 p = buffer; 4533 p = ap(buffer, sizeof(buffer), p, "sv_info[%d]=\"PRN%d", i, i + N_SVNO_GPS); 4534 4535 tmp_val = cfgh.health[i]; /* a 6 bit SV health code */ 4536 p = ap(buffer, sizeof(buffer), p, "; health=0x%02x (", tmp_val); 4537 /* "All Ones" has a special meaning" */ 4538 if (tmp_val == 0x3F) /* satellite is unusable or doesn't even exist */ 4539 cp = "SV UNAVAILABLE"; 4540 else { 4541 /* The MSB contains a summary of the 3 MSBs of the 8 bit health code, 4542 * indicating if the data sent by the satellite is OK or not. */ 4543 p = ap(buffer, sizeof(buffer), p, "DATA %s, ", (tmp_val & 0x20) ? "BAD" : "OK" ); 4544 4545 /* The 5 LSBs contain the status of the different signals sent by the satellite. */ 4546 switch (tmp_val & 0x1F) 4547 { 4548 case 0x00: cp = "SIGNAL OK"; break; 4549 /* codes 0x01 through 0x1B indicate that one or more 4550 * specific signal components are weak or dead. 4551 * We don't decode this here in detail. */ 4552 case 0x1C: cp = "SV IS TEMP OUT"; break; 4553 case 0x1D: cp = "SV WILL BE TEMP OUT"; break; 4554 default: cp = "TRANSMISSION PROBLEMS"; break; 4555 } 4556 } 4557 p = ap(buffer, sizeof(buffer), p, "%s)", cp ); 4558 4559 tmp_val = cfgh.cfg[i]; /* a 4 bit SV configuration/type code */ 4560 p = ap(buffer, sizeof(buffer), p, "; cfg=0x%02x (", tmp_val); 4561 switch (tmp_val & 0x7) 4562 { 4563 case 0x00: cp = "(reserved)"; break; 4564 case 0x01: cp = "BLOCK II/IIA/IIR"; break; 4565 case 0x02: cp = "BLOCK IIR-M"; break; 4566 case 0x03: cp = "BLOCK IIF"; break; 4567 case 0x04: cp = "BLOCK III"; break; 4568 default: cp = "unknown SV type"; break; 4569 } 4570 p = ap(buffer, sizeof(buffer), p, "%s", cp ); 4571 if (tmp_val & 0x08) /* A-S is on, P-code is encrypted */ 4572 p = ap( buffer, sizeof(buffer), p, ", A-S on" ); 4573 4574 p = ap(buffer, sizeof(buffer), p, ")\""); 4575 set_var(&parse->kv, buffer, sizeof(buffer), RO|COND_DEF); 4576 } 4577 } 4578 } 4579 break; 4580 4581 case GPS_ALM: 4582 break; 4583 4584 case GPS_EPH: 4585 break; 4586 4587 case GPS_UTC: 4588 { 4589 UTC utc; 4590 char buffer[512]; 4591 char *p; 4592 4593 p = buffer; 4594 4595 get_mbg_utc(&bufp, &utc); 4596 4597 if (utc.valid) 4598 { 4599 p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\""); 4600 mk_utcinfo(p, utc.t0t.wn, utc.WNlsf, utc.DNt, utc.delta_tls, utc.delta_tlsf, BUFFER_SIZE(buffer, p)); 4601 p += strlen(p); 4602 p = ap(buffer, sizeof(buffer), p, "\""); 4603 } 4604 else 4605 { 4606 p = ap(buffer, sizeof(buffer), p, "gps_utc_correction=\"<NO UTC DATA>\""); 4607 } 4608 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4609 } 4610 break; 4611 4612 case GPS_IONO: 4613 break; 4614 4615 case GPS_ASCII_MSG: 4616 { 4617 ASCII_MSG gps_ascii_msg; 4618 char buffer[128]; 4619 4620 get_mbg_ascii_msg(&bufp, &gps_ascii_msg); 4621 4622 if (gps_ascii_msg.valid) 4623 { 4624 char buffer1[128]; 4625 mkreadable(buffer1, sizeof(buffer1), gps_ascii_msg.s, strlen(gps_ascii_msg.s), (int)0); 4626 4627 snprintf(buffer, sizeof(buffer), "gps_message=\"%s\"", buffer1); 4628 } 4629 else 4630 snprintf(buffer, sizeof(buffer), "gps_message=<NONE>"); 4631 4632 set_var(&parse->kv, buffer, sizeof(buffer), RO|DEF); 4633 } 4634 4635 break; 4636 4637 default: 4638 break; 4639 } 4640 } 4641 else 4642 { 4643 msyslog(LOG_DEBUG, "PARSE receiver #%d: gps16x_message: message checksum error: hdr_csum = 0x%x (expected 0x%x), " 4644 "data_len = %d, data_csum = 0x%x (expected 0x%x)", 4645 CLK_UNIT(parse->peer), 4646 header.hdr_csum, mbg_csum(parsetime->parse_msg + 1, 6), 4647 header.len, 4648 header.data_csum, mbg_csum(bufp, (unsigned)((header.len < sizeof(parsetime->parse_msg)) ? header.len : 0))); 4649 } 4650 } 4651 4652 return; 4653 } 4654 4655 /*------------------------------------------------------------ 4656 * gps16x_poll - query the reciver peridically 4657 */ 4658 static void 4659 gps16x_poll( 4660 struct peer *peer 4661 ) 4662 { 4663 struct parseunit *parse = peer->procptr->unitptr; 4664 4665 static GPS_MSG_HDR sequence[] = 4666 { 4667 { GPS_SW_REV, 0, 0, 0 }, 4668 { GPS_BVAR_STAT, 0, 0, 0 }, 4669 { GPS_UTC, 0, 0, 0 }, 4670 { GPS_ASCII_MSG, 0, 0, 0 }, 4671 { GPS_ANT_INFO, 0, 0, 0 }, 4672 { GPS_CFGH, 0, 0, 0 }, 4673 { GPS_POS_XYZ, 0, 0, 0 }, 4674 { GPS_POS_LLA, 0, 0, 0 }, 4675 { (unsigned short)~0, 0, 0, 0 } 4676 }; 4677 4678 int rtc; 4679 unsigned char cmd_buffer[64]; 4680 unsigned char *outp = cmd_buffer; 4681 GPS_MSG_HDR *header; 4682 4683 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4684 { 4685 parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; 4686 } 4687 4688 if (sequence[parse->localstate].cmd == (unsigned short)~0) 4689 parse->localstate = 0; 4690 4691 header = sequence + parse->localstate++; 4692 4693 *outp++ = SOH; /* start command */ 4694 4695 put_mbg_header(&outp, header); 4696 outp = cmd_buffer + 1; 4697 4698 header->hdr_csum = (short)mbg_csum(outp, 6); 4699 put_mbg_header(&outp, header); 4700 4701 #ifdef DEBUG 4702 if (debug > 2) 4703 { 4704 char buffer[128]; 4705 4706 mkreadable(buffer, sizeof(buffer), (char *)cmd_buffer, (unsigned)(outp - cmd_buffer), 1); 4707 printf("PARSE receiver #%d: transmitted message #%ld (%d bytes) >%s<\n", 4708 CLK_UNIT(parse->peer), 4709 parse->localstate - 1, 4710 (int)(outp - cmd_buffer), 4711 buffer); 4712 } 4713 #endif 4714 4715 rtc = (int) write(parse->generic->io.fd, cmd_buffer, (unsigned long)(outp - cmd_buffer)); 4716 4717 if (rtc < 0) 4718 { 4719 ERR(ERR_BADIO) 4720 msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4721 } 4722 else 4723 if (rtc != outp - cmd_buffer) 4724 { 4725 ERR(ERR_BADIO) 4726 msyslog(LOG_ERR, "PARSE receiver #%d: gps16x_poll: failed to send cmd incomplete (%d of %d bytes sent)", CLK_UNIT(parse->peer), rtc, (int)(outp - cmd_buffer)); 4727 } 4728 4729 clear_err(parse, ERR_BADIO); 4730 return; 4731 } 4732 4733 /*-------------------------------------------------- 4734 * init routine - setup timer 4735 */ 4736 static int 4737 gps16x_poll_init( 4738 struct parseunit *parse 4739 ) 4740 { 4741 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4742 { 4743 parse->peer->procptr->action = gps16x_poll; 4744 gps16x_poll(parse->peer); 4745 } 4746 4747 return 0; 4748 } 4749 4750 #else 4751 static void 4752 gps16x_message( 4753 struct parseunit *parse, 4754 parsetime_t *parsetime 4755 ) 4756 {} 4757 static int 4758 gps16x_poll_init( 4759 struct parseunit *parse 4760 ) 4761 { 4762 return 1; 4763 } 4764 #endif /* CLOCK_MEINBERG */ 4765 4766 /**=========================================================================== 4767 ** clock polling support 4768 **/ 4769 4770 /*-------------------------------------------------- 4771 * direct poll routine 4772 */ 4773 static void 4774 poll_dpoll( 4775 struct parseunit *parse 4776 ) 4777 { 4778 long rtc; 4779 const char *ps = ((poll_info_t *)parse->parse_type->cl_data)->string; 4780 long ct = ((poll_info_t *)parse->parse_type->cl_data)->count; 4781 4782 rtc = write(parse->generic->io.fd, ps, ct); 4783 if (rtc < 0) 4784 { 4785 ERR(ERR_BADIO) 4786 msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4787 } 4788 else 4789 if (rtc != ct) 4790 { 4791 ERR(ERR_BADIO) 4792 msyslog(LOG_ERR, "PARSE receiver #%d: poll_dpoll: failed to send cmd incomplete (%ld of %ld bytes sent)", CLK_UNIT(parse->peer), rtc, ct); 4793 } 4794 clear_err(parse, ERR_BADIO); 4795 } 4796 4797 /*-------------------------------------------------- 4798 * periodic poll routine 4799 */ 4800 static void 4801 poll_poll( 4802 struct peer *peer 4803 ) 4804 { 4805 struct parseunit *parse = peer->procptr->unitptr; 4806 4807 if (parse->parse_type->cl_poll) 4808 parse->parse_type->cl_poll(parse); 4809 4810 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4811 { 4812 parse->peer->procptr->nextaction = current_time + ((poll_info_t *)parse->parse_type->cl_data)->rate; 4813 } 4814 } 4815 4816 /*-------------------------------------------------- 4817 * init routine - setup timer 4818 */ 4819 static int 4820 poll_init( 4821 struct parseunit *parse 4822 ) 4823 { 4824 if (((poll_info_t *)parse->parse_type->cl_data)->rate) 4825 { 4826 parse->peer->procptr->action = poll_poll; 4827 poll_poll(parse->peer); 4828 } 4829 4830 return 0; 4831 } 4832 4833 /**=========================================================================== 4834 ** Trimble support 4835 **/ 4836 4837 /*------------------------------------------------------------- 4838 * trimble TAIP init routine - setup EOL and then do poll_init. 4839 */ 4840 static int 4841 trimbletaip_init( 4842 struct parseunit *parse 4843 ) 4844 { 4845 #ifdef HAVE_TERMIOS 4846 struct termios tio; 4847 #endif 4848 #ifdef HAVE_SYSV_TTYS 4849 struct termio tio; 4850 #endif 4851 /* 4852 * configure terminal line for trimble receiver 4853 */ 4854 if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) 4855 { 4856 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcgetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); 4857 return 0; 4858 } 4859 else 4860 { 4861 tio.c_cc[VEOL] = TRIMBLETAIP_EOL; 4862 4863 if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) 4864 { 4865 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_init: tcsetattr(fd, &tio): %m", CLK_UNIT(parse->peer)); 4866 return 0; 4867 } 4868 } 4869 return poll_init(parse); 4870 } 4871 4872 /*-------------------------------------------------- 4873 * trimble TAIP event routine - reset receiver upon data format trouble 4874 */ 4875 static const char *taipinit[] = { 4876 ">FPV00000000<", 4877 ">SRM;ID_FLAG=F;CS_FLAG=T;EC_FLAG=F;FR_FLAG=T;CR_FLAG=F<", 4878 ">FTM00020001<", 4879 (char *)0 4880 }; 4881 4882 static void 4883 trimbletaip_event( 4884 struct parseunit *parse, 4885 int event 4886 ) 4887 { 4888 switch (event) 4889 { 4890 case CEVNT_BADREPLY: /* reset on garbled input */ 4891 case CEVNT_TIMEOUT: /* reset on no input */ 4892 { 4893 const char **iv; 4894 4895 iv = taipinit; 4896 while (*iv) 4897 { 4898 int rtc = (int) write(parse->generic->io.fd, *iv, strlen(*iv)); 4899 if (rtc < 0) 4900 { 4901 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 4902 return; 4903 } 4904 else 4905 { 4906 if (rtc != (int)strlen(*iv)) 4907 { 4908 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: failed to send cmd incomplete (%d of %d bytes sent)", 4909 CLK_UNIT(parse->peer), rtc, (int)strlen(*iv)); 4910 return; 4911 } 4912 } 4913 iv++; 4914 } 4915 4916 NLOG(NLOG_CLOCKINFO) 4917 ERR(ERR_BADIO) 4918 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletaip_event: RECEIVER INITIALIZED", 4919 CLK_UNIT(parse->peer)); 4920 } 4921 break; 4922 4923 default: /* ignore */ 4924 break; 4925 } 4926 } 4927 4928 /* 4929 * This driver supports the Trimble SVee Six Plus GPS receiver module. 4930 * It should support other Trimble receivers which use the Trimble Standard 4931 * Interface Protocol (see below). 4932 * 4933 * The module has a serial I/O port for command/data and a 1 pulse-per-second 4934 * output, about 1 microsecond wide. The leading edge of the pulse is 4935 * coincident with the change of the GPS second. This is the same as 4936 * the change of the UTC second +/- ~1 microsecond. Some other clocks 4937 * specifically use a feature in the data message as a timing reference, but 4938 * the SVee Six Plus does not do this. In fact there is considerable jitter 4939 * on the timing of the messages, so this driver only supports the use 4940 * of the PPS pulse for accurate timing. Where it is determined that 4941 * the offset is way off, when first starting up ntpd for example, 4942 * the timing of the data stream is used until the offset becomes low enough 4943 * (|offset| < CLOCK_MAX), at which point the pps offset is used. 4944 * 4945 * It can use either option for receiving PPS information - the 'ppsclock' 4946 * stream pushed onto the serial data interface to timestamp the Carrier 4947 * Detect interrupts, where the 1PPS connects to the CD line. This only 4948 * works on SunOS 4.1.x currently. To select this, define PPSPPS in 4949 * Config.local. The other option is to use a pulse-stretcher/level-converter 4950 * to convert the PPS pulse into a RS232 start pulse & feed this into another 4951 * tty port. To use this option, define PPSCLK in Config.local. The pps input, 4952 * by whichever method, is handled in ntp_loopfilter.c 4953 * 4954 * The receiver uses a serial message protocol called Trimble Standard 4955 * Interface Protocol (it can support others but this driver only supports 4956 * TSIP). Messages in this protocol have the following form: 4957 * 4958 * <DLE><id> ... <data> ... <DLE><ETX> 4959 * 4960 * Any bytes within the <data> portion of value 10 hex (<DLE>) are doubled 4961 * on transmission and compressed back to one on reception. Otherwise 4962 * the values of data bytes can be anything. The serial interface is RS-422 4963 * asynchronous using 9600 baud, 8 data bits with odd party (**note** 9 bits 4964 * in total!), and 1 stop bit. The protocol supports byte, integer, single, 4965 * and double datatypes. Integers are two bytes, sent most significant first. 4966 * Singles are IEEE754 single precision floating point numbers (4 byte) sent 4967 * sign & exponent first. Doubles are IEEE754 double precision floating point 4968 * numbers (8 byte) sent sign & exponent first. 4969 * The receiver supports a large set of messages, only a small subset of 4970 * which are used here. From driver to receiver the following are used: 4971 * 4972 * ID Description 4973 * 4974 * 21 Request current time 4975 * 22 Mode Select 4976 * 2C Set/Request operating parameters 4977 * 2F Request UTC info 4978 * 35 Set/Request I/O options 4979 4980 * From receiver to driver the following are recognised: 4981 * 4982 * ID Description 4983 * 4984 * 41 GPS Time 4985 * 44 Satellite selection, PDOP, mode 4986 * 46 Receiver health 4987 * 4B Machine code/status 4988 * 4C Report operating parameters (debug only) 4989 * 4F UTC correction data (used to get leap second warnings) 4990 * 55 I/O options (debug only) 4991 * 4992 * All others are accepted but ignored. 4993 * 4994 */ 4995 4996 #define PI 3.1415926535898 /* lots of sig figs */ 4997 #define D2R PI/180.0 4998 4999 /*------------------------------------------------------------------- 5000 * sendcmd, sendbyte, sendetx, sendflt, sendint implement the command 5001 * interface to the receiver. 5002 * 5003 * CAVEAT: the sendflt, sendint routines are byte order dependend and 5004 * float implementation dependend - these must be converted to portable 5005 * versions ! 5006 * 5007 * CURRENT LIMITATION: float implementation. This runs only on systems 5008 * with IEEE754 floats as native floats 5009 */ 5010 5011 typedef struct trimble 5012 { 5013 u_long last_msg; /* last message received */ 5014 u_long last_reset; /* last time a reset was issued */ 5015 u_char qtracking; /* query tracking status */ 5016 u_long ctrack; /* current tracking set */ 5017 u_long ltrack; /* last tracking set */ 5018 } trimble_t; 5019 5020 union uval { 5021 u_char bd[8]; 5022 int iv; 5023 float fv; 5024 double dv; 5025 }; 5026 5027 struct txbuf 5028 { 5029 short idx; /* index to first unused byte */ 5030 u_char *txt; /* pointer to actual data buffer */ 5031 }; 5032 5033 void sendcmd (struct txbuf *buf, int c); 5034 void sendbyte (struct txbuf *buf, int b); 5035 void sendetx (struct txbuf *buf, struct parseunit *parse); 5036 void sendint (struct txbuf *buf, int a); 5037 void sendflt (struct txbuf *buf, double a); 5038 5039 void 5040 sendcmd( 5041 struct txbuf *buf, 5042 int c 5043 ) 5044 { 5045 buf->txt[0] = DLE; 5046 buf->txt[1] = (u_char)c; 5047 buf->idx = 2; 5048 } 5049 5050 void sendcmd (struct txbuf *buf, int c); 5051 void sendbyte (struct txbuf *buf, int b); 5052 void sendetx (struct txbuf *buf, struct parseunit *parse); 5053 void sendint (struct txbuf *buf, int a); 5054 void sendflt (struct txbuf *buf, double a); 5055 5056 void 5057 sendbyte( 5058 struct txbuf *buf, 5059 int b 5060 ) 5061 { 5062 if (b == DLE) 5063 buf->txt[buf->idx++] = DLE; 5064 buf->txt[buf->idx++] = (u_char)b; 5065 } 5066 5067 void 5068 sendetx( 5069 struct txbuf *buf, 5070 struct parseunit *parse 5071 ) 5072 { 5073 buf->txt[buf->idx++] = DLE; 5074 buf->txt[buf->idx++] = ETX; 5075 5076 if (write(parse->generic->io.fd, buf->txt, (unsigned long)buf->idx) != buf->idx) 5077 { 5078 ERR(ERR_BADIO) 5079 msyslog(LOG_ERR, "PARSE receiver #%d: sendetx: failed to send cmd to clock: %m", CLK_UNIT(parse->peer)); 5080 } 5081 else 5082 { 5083 #ifdef DEBUG 5084 if (debug > 2) 5085 { 5086 char buffer[256]; 5087 5088 mkreadable(buffer, sizeof(buffer), (char *)buf->txt, (unsigned)buf->idx, 1); 5089 printf("PARSE receiver #%d: transmitted message (%d bytes) >%s<\n", 5090 CLK_UNIT(parse->peer), 5091 buf->idx, buffer); 5092 } 5093 #endif 5094 clear_err(parse, ERR_BADIO); 5095 } 5096 } 5097 5098 void 5099 sendint( 5100 struct txbuf *buf, 5101 int a 5102 ) 5103 { 5104 /* send 16bit int, msbyte first */ 5105 sendbyte(buf, (u_char)((a>>8) & 0xff)); 5106 sendbyte(buf, (u_char)(a & 0xff)); 5107 } 5108 5109 void 5110 sendflt( 5111 struct txbuf *buf, 5112 double a 5113 ) 5114 { 5115 int i; 5116 union uval uval; 5117 5118 uval.fv = (float) a; 5119 #ifdef WORDS_BIGENDIAN 5120 for (i=0; i<=3; i++) 5121 #else 5122 for (i=3; i>=0; i--) 5123 #endif 5124 sendbyte(buf, uval.bd[i]); 5125 } 5126 5127 #define TRIM_POS_OPT 0x13 /* output position with high precision */ 5128 #define TRIM_TIME_OPT 0x03 /* use UTC time stamps, on second */ 5129 5130 /*-------------------------------------------------- 5131 * trimble TSIP setup routine 5132 */ 5133 static int 5134 trimbletsip_setup( 5135 struct parseunit *parse, 5136 const char *reason 5137 ) 5138 { 5139 u_char buffer[256]; 5140 struct txbuf buf; 5141 trimble_t *t = parse->localdata; 5142 5143 if (t && t->last_reset && 5144 ((t->last_reset + TRIMBLE_RESET_HOLDOFF) > current_time)) { 5145 return 1; /* not yet */ 5146 } 5147 5148 if (t) 5149 t->last_reset = current_time; 5150 5151 buf.txt = buffer; 5152 5153 sendcmd(&buf, CMD_CVERSION); /* request software versions */ 5154 sendetx(&buf, parse); 5155 5156 sendcmd(&buf, CMD_COPERPARAM); /* set operating parameters */ 5157 sendbyte(&buf, 4); /* static */ 5158 sendflt(&buf, 5.0*D2R); /* elevation angle mask = 10 deg XXX */ 5159 sendflt(&buf, 4.0); /* s/n ratio mask = 6 XXX */ 5160 sendflt(&buf, 12.0); /* PDOP mask = 12 */ 5161 sendflt(&buf, 8.0); /* PDOP switch level = 8 */ 5162 sendetx(&buf, parse); 5163 5164 sendcmd(&buf, CMD_CMODESEL); /* fix mode select */ 5165 sendbyte(&buf, 1); /* time transfer mode */ 5166 sendetx(&buf, parse); 5167 5168 sendcmd(&buf, CMD_CMESSAGE); /* request system message */ 5169 sendetx(&buf, parse); 5170 5171 sendcmd(&buf, CMD_CSUPER); /* superpacket fix */ 5172 sendbyte(&buf, 0x2); /* binary mode */ 5173 sendetx(&buf, parse); 5174 5175 sendcmd(&buf, CMD_CIOOPTIONS); /* set I/O options */ 5176 sendbyte(&buf, TRIM_POS_OPT); /* position output */ 5177 sendbyte(&buf, 0x00); /* no velocity output */ 5178 sendbyte(&buf, TRIM_TIME_OPT); /* UTC, compute on seconds */ 5179 sendbyte(&buf, 0x00); /* no raw measurements */ 5180 sendetx(&buf, parse); 5181 5182 sendcmd(&buf, CMD_CUTCPARAM); /* request UTC correction data */ 5183 sendetx(&buf, parse); 5184 5185 NLOG(NLOG_CLOCKINFO) 5186 ERR(ERR_BADIO) 5187 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_setup: RECEIVER RE-INITIALIZED (%s)", CLK_UNIT(parse->peer), reason); 5188 5189 return 0; 5190 } 5191 5192 /*-------------------------------------------------- 5193 * TRIMBLE TSIP check routine 5194 */ 5195 static void 5196 trimble_check( 5197 struct peer *peer 5198 ) 5199 { 5200 struct parseunit *parse = peer->procptr->unitptr; 5201 trimble_t *t = parse->localdata; 5202 u_char buffer[256]; 5203 struct txbuf buf; 5204 buf.txt = buffer; 5205 5206 if (t) 5207 { 5208 if (current_time > t->last_msg + TRIMBLETSIP_IDLE_TIME) 5209 (void)trimbletsip_setup(parse, "message timeout"); 5210 } 5211 5212 poll_poll(parse->peer); /* emit query string and re-arm timer */ 5213 5214 if (t && t->qtracking) 5215 { 5216 u_long oldsats = t->ltrack & ~t->ctrack; 5217 5218 t->qtracking = 0; 5219 t->ltrack = t->ctrack; 5220 5221 if (oldsats) 5222 { 5223 int i; 5224 5225 for (i = 0; oldsats; i++) { 5226 if (oldsats & (1 << i)) 5227 { 5228 sendcmd(&buf, CMD_CSTATTRACK); 5229 sendbyte(&buf, i+1); /* old sat */ 5230 sendetx(&buf, parse); 5231 } 5232 oldsats &= ~(1 << i); 5233 } 5234 } 5235 5236 sendcmd(&buf, CMD_CSTATTRACK); 5237 sendbyte(&buf, 0x00); /* current tracking set */ 5238 sendetx(&buf, parse); 5239 } 5240 } 5241 5242 /*-------------------------------------------------- 5243 * TRIMBLE TSIP end routine 5244 */ 5245 static void 5246 trimbletsip_end( 5247 struct parseunit *parse 5248 ) 5249 { trimble_t *t = parse->localdata; 5250 5251 if (t) 5252 { 5253 free(t); 5254 parse->localdata = NULL; 5255 } 5256 parse->peer->procptr->nextaction = 0; 5257 parse->peer->procptr->action = NULL; 5258 } 5259 5260 /*-------------------------------------------------- 5261 * TRIMBLE TSIP init routine 5262 */ 5263 static int 5264 trimbletsip_init( 5265 struct parseunit *parse 5266 ) 5267 { 5268 #if defined(VEOL) || defined(VEOL2) 5269 #ifdef HAVE_TERMIOS 5270 struct termios tio; /* NEEDED FOR A LONG TIME ! */ 5271 #endif 5272 #ifdef HAVE_SYSV_TTYS 5273 struct termio tio; /* NEEDED FOR A LONG TIME ! */ 5274 #endif 5275 /* 5276 * allocate local data area 5277 */ 5278 if (!parse->localdata) 5279 { 5280 trimble_t *t; 5281 5282 t = (trimble_t *)(parse->localdata = emalloc(sizeof(trimble_t))); 5283 5284 if (t) 5285 { 5286 memset((char *)t, 0, sizeof(trimble_t)); 5287 t->last_msg = current_time; 5288 } 5289 } 5290 5291 parse->peer->procptr->action = trimble_check; 5292 parse->peer->procptr->nextaction = current_time; 5293 5294 /* 5295 * configure terminal line for ICANON mode with VEOL characters 5296 */ 5297 if (TTY_GETATTR(parse->generic->io.fd, &tio) == -1) 5298 { 5299 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcgetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); 5300 return 0; 5301 } 5302 else 5303 { 5304 if ((parse_clockinfo[CLK_TYPE(parse->peer)].cl_lflag & ICANON)) 5305 { 5306 #ifdef VEOL 5307 tio.c_cc[VEOL] = ETX; 5308 #endif 5309 #ifdef VEOL2 5310 tio.c_cc[VEOL2] = DLE; 5311 #endif 5312 } 5313 5314 if (TTY_SETATTR(parse->generic->io.fd, &tio) == -1) 5315 { 5316 msyslog(LOG_ERR, "PARSE receiver #%d: trimbletsip_init: tcsetattr(%d, &tio): %m", CLK_UNIT(parse->peer), parse->generic->io.fd); 5317 return 0; 5318 } 5319 } 5320 #endif 5321 return trimbletsip_setup(parse, "initial startup"); 5322 } 5323 5324 /*------------------------------------------------------------ 5325 * trimbletsip_event - handle Trimble events 5326 * simple evente handler - attempt to re-initialize receiver 5327 */ 5328 static void 5329 trimbletsip_event( 5330 struct parseunit *parse, 5331 int event 5332 ) 5333 { 5334 switch (event) 5335 { 5336 case CEVNT_BADREPLY: /* reset on garbled input */ 5337 case CEVNT_TIMEOUT: /* reset on no input */ 5338 (void)trimbletsip_setup(parse, "event BAD_REPLY/TIMEOUT"); 5339 break; 5340 5341 default: /* ignore */ 5342 break; 5343 } 5344 } 5345 5346 /* 5347 * getflt, getint convert fields in the incoming data into the 5348 * appropriate type of item 5349 * 5350 * CAVEAT: these routines are currently definitely byte order dependent 5351 * and assume Representation(float) == IEEE754 5352 * These functions MUST be converted to portable versions (especially 5353 * converting the float representation into ntp_fp formats in order 5354 * to avoid floating point operations at all! 5355 */ 5356 5357 static float 5358 getflt( 5359 u_char *bp 5360 ) 5361 { 5362 union uval uval; 5363 5364 #ifdef WORDS_BIGENDIAN 5365 uval.bd[0] = *bp++; 5366 uval.bd[1] = *bp++; 5367 uval.bd[2] = *bp++; 5368 uval.bd[3] = *bp; 5369 #else /* ! WORDS_BIGENDIAN */ 5370 uval.bd[3] = *bp++; 5371 uval.bd[2] = *bp++; 5372 uval.bd[1] = *bp++; 5373 uval.bd[0] = *bp; 5374 #endif /* ! WORDS_BIGENDIAN */ 5375 return uval.fv; 5376 } 5377 5378 static double 5379 getdbl( 5380 u_char *bp 5381 ) 5382 { 5383 union uval uval; 5384 5385 #ifdef WORDS_BIGENDIAN 5386 uval.bd[0] = *bp++; 5387 uval.bd[1] = *bp++; 5388 uval.bd[2] = *bp++; 5389 uval.bd[3] = *bp++; 5390 uval.bd[4] = *bp++; 5391 uval.bd[5] = *bp++; 5392 uval.bd[6] = *bp++; 5393 uval.bd[7] = *bp; 5394 #else /* ! WORDS_BIGENDIAN */ 5395 uval.bd[7] = *bp++; 5396 uval.bd[6] = *bp++; 5397 uval.bd[5] = *bp++; 5398 uval.bd[4] = *bp++; 5399 uval.bd[3] = *bp++; 5400 uval.bd[2] = *bp++; 5401 uval.bd[1] = *bp++; 5402 uval.bd[0] = *bp; 5403 #endif /* ! WORDS_BIGENDIAN */ 5404 return uval.dv; 5405 } 5406 5407 static int 5408 getshort( 5409 unsigned char *p 5410 ) 5411 { 5412 return (int) get_msb_short(&p); 5413 } 5414 5415 /*-------------------------------------------------- 5416 * trimbletsip_message - process trimble messages 5417 */ 5418 #define RTOD (180.0 / 3.1415926535898) 5419 #define mb(_X_) (buffer[2+(_X_)]) /* shortcut for buffer access */ 5420 5421 static void 5422 trimbletsip_message( 5423 struct parseunit *parse, 5424 parsetime_t *parsetime 5425 ) 5426 { 5427 unsigned char *buffer = parsetime->parse_msg; 5428 unsigned int size = parsetime->parse_msglen; 5429 5430 if ((size < 4) || 5431 (buffer[0] != DLE) || 5432 (buffer[size-1] != ETX) || 5433 (buffer[size-2] != DLE)) 5434 { 5435 #ifdef DEBUG 5436 if (debug > 2) { 5437 size_t i; 5438 5439 printf("TRIMBLE BAD packet, size %d:\n ", size); 5440 for (i = 0; i < size; i++) { 5441 printf ("%2.2x, ", buffer[i]&0xff); 5442 if (i%16 == 15) printf("\n\t"); 5443 } 5444 printf("\n"); 5445 } 5446 #endif 5447 return; 5448 } 5449 else 5450 { 5451 u_short var_flag; 5452 trimble_t *tr = parse->localdata; 5453 unsigned int cmd = buffer[1]; 5454 char pbuffer[200]; 5455 char *t = pbuffer; 5456 cmd_info_t *s; 5457 5458 #ifdef DEBUG 5459 if (debug > 3) { 5460 size_t i; 5461 5462 printf("TRIMBLE packet 0x%02x, size %d:\n ", cmd, size); 5463 for (i = 0; i < size; i++) { 5464 printf ("%2.2x, ", buffer[i]&0xff); 5465 if (i%16 == 15) printf("\n\t"); 5466 } 5467 printf("\n"); 5468 } 5469 #endif 5470 5471 if (tr) 5472 tr->last_msg = current_time; 5473 5474 s = trimble_convert(cmd, trimble_rcmds); 5475 5476 if (s) 5477 { 5478 t = ap(pbuffer, sizeof(pbuffer), t, "%s=\"", s->varname); 5479 } 5480 else 5481 { 5482 DPRINTF(1, ("TRIMBLE UNKNOWN COMMAND 0x%02x\n", cmd)); 5483 return; 5484 } 5485 5486 var_flag = (u_short) s->varmode; 5487 5488 switch(cmd) 5489 { 5490 case CMD_RCURTIME: 5491 t = ap(pbuffer, sizeof(pbuffer), t, "%f, %d, %f", 5492 getflt((unsigned char *)&mb(0)), getshort((unsigned char *)&mb(4)), 5493 getflt((unsigned char *)&mb(6))); 5494 break; 5495 5496 case CMD_RBEST4: 5497 t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); 5498 switch (mb(0) & 0xF) 5499 { 5500 default: 5501 t = ap(pbuffer, sizeof(pbuffer), t, 5502 "0x%x", mb(0) & 0x7); 5503 break; 5504 5505 case 1: 5506 t = ap(pbuffer, sizeof(pbuffer), t, "0D"); 5507 break; 5508 5509 case 3: 5510 t = ap(pbuffer, sizeof(pbuffer), t, "2D"); 5511 break; 5512 5513 case 4: 5514 t = ap(pbuffer, sizeof(pbuffer), t, "3D"); 5515 break; 5516 } 5517 if (mb(0) & 0x10) 5518 t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); 5519 else 5520 t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); 5521 5522 t = ap(pbuffer, sizeof(pbuffer), t, "satellites %02d %02d %02d %02d, PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f", 5523 mb(1), mb(2), mb(3), mb(4), 5524 getflt((unsigned char *)&mb(5)), 5525 getflt((unsigned char *)&mb(9)), 5526 getflt((unsigned char *)&mb(13)), 5527 getflt((unsigned char *)&mb(17))); 5528 5529 break; 5530 5531 case CMD_RVERSION: 5532 t = ap(pbuffer, sizeof(pbuffer), t, "%d.%d (%d/%d/%d)", 5533 mb(0)&0xff, mb(1)&0xff, 1900+(mb(4)&0xff), mb(2)&0xff, mb(3)&0xff); 5534 break; 5535 5536 case CMD_RRECVHEALTH: 5537 { 5538 static const char *msgs[] = 5539 { 5540 "Battery backup failed", 5541 "Signal processor error", 5542 "Alignment error, channel or chip 1", 5543 "Alignment error, channel or chip 2", 5544 "Antenna feed line fault", 5545 "Excessive ref freq. error", 5546 "<BIT 6>", 5547 "<BIT 7>" 5548 }; 5549 5550 int i, bits; 5551 5552 switch (mb(0) & 0xFF) 5553 { 5554 default: 5555 t = ap(pbuffer, sizeof(pbuffer), t, "illegal value 0x%02x", mb(0) & 0xFF); 5556 break; 5557 case 0x00: 5558 t = ap(pbuffer, sizeof(pbuffer), t, "doing position fixes"); 5559 break; 5560 case 0x01: 5561 t = ap(pbuffer, sizeof(pbuffer), t, "no GPS time yet"); 5562 break; 5563 case 0x03: 5564 t = ap(pbuffer, sizeof(pbuffer), t, "PDOP too high"); 5565 break; 5566 case 0x08: 5567 t = ap(pbuffer, sizeof(pbuffer), t, "no usable satellites"); 5568 break; 5569 case 0x09: 5570 t = ap(pbuffer, sizeof(pbuffer), t, "only ONE usable satellite"); 5571 break; 5572 case 0x0A: 5573 t = ap(pbuffer, sizeof(pbuffer), t, "only TWO usable satellites"); 5574 break; 5575 case 0x0B: 5576 t = ap(pbuffer, sizeof(pbuffer), t, "only THREE usable satellites"); 5577 break; 5578 case 0x0C: 5579 t = ap(pbuffer, sizeof(pbuffer), t, "the chosen satellite is unusable"); 5580 break; 5581 } 5582 5583 bits = mb(1) & 0xFF; 5584 5585 for (i = 0; i < 8; i++) 5586 if (bits & (0x1<<i)) 5587 { 5588 t = ap(pbuffer, sizeof(pbuffer), t, ", %s", msgs[i]); 5589 } 5590 } 5591 break; 5592 5593 case CMD_RMESSAGE: 5594 mkreadable(t, (int)BUFFER_SIZE(pbuffer, t), (char *)&mb(0), (unsigned)(size - 2 - (&mb(0) - buffer)), 0); 5595 break; 5596 5597 case CMD_RMACHSTAT: 5598 { 5599 static const char *msgs[] = 5600 { 5601 "Synthesizer Fault", 5602 "Battery Powered Time Clock Fault", 5603 "A-to-D Converter Fault", 5604 "The almanac stored in the receiver is not complete and current", 5605 "<BIT 4>", 5606 "<BIT 5", 5607 "<BIT 6>", 5608 "<BIT 7>" 5609 }; 5610 5611 int i, bits; 5612 5613 t = ap(pbuffer, sizeof(pbuffer), t, "machine id 0x%02x", mb(0) & 0xFF); 5614 bits = mb(1) & 0xFF; 5615 5616 for (i = 0; i < 8; i++) 5617 if (bits & (0x1<<i)) 5618 { 5619 t = ap(pbuffer, sizeof(pbuffer), t, ", %s", msgs[i]); 5620 } 5621 5622 t = ap(pbuffer, sizeof(pbuffer), t, ", Superpackets %ssupported", (mb(2) & 0xFF) ? "" :"un" ); 5623 } 5624 break; 5625 5626 case CMD_ROPERPARAM: 5627 t = ap(pbuffer, sizeof(pbuffer), t, "%2x %.1f %.1f %.1f %.1f", 5628 mb(0), getflt((unsigned char *)&mb(1)), getflt((unsigned char *)&mb(5)), 5629 getflt((unsigned char *)&mb(9)), getflt((unsigned char *)&mb(13))); 5630 break; 5631 5632 case CMD_RUTCPARAM: 5633 { 5634 float t0t = getflt((unsigned char *)&mb(14)); 5635 short wnt = (short) getshort((unsigned char *)&mb(18)); 5636 short dtls = (short) getshort((unsigned char *)&mb(12)); 5637 short wnlsf = (short) getshort((unsigned char *)&mb(20)); 5638 short dn = (short) getshort((unsigned char *)&mb(22)); 5639 short dtlsf = (short) getshort((unsigned char *)&mb(24)); 5640 5641 if ((int)t0t != 0) 5642 { 5643 mk_utcinfo(t, wnt, wnlsf, dn, dtls, dtlsf, BUFFER_SIZE(pbuffer, t)); 5644 } 5645 else 5646 { 5647 t = ap(pbuffer, sizeof(pbuffer), t, "<NO UTC DATA>"); 5648 } 5649 } 5650 break; 5651 5652 case CMD_RSAT1BIAS: 5653 t = ap(pbuffer, sizeof(pbuffer), t, "%.1fm %.2fm/s at %.1fs", 5654 getflt(&mb(0)), getflt(&mb(4)), getflt(&mb(8))); 5655 break; 5656 5657 case CMD_RIOOPTIONS: 5658 { 5659 t = ap(pbuffer, sizeof(pbuffer), t, "%02x %02x %02x %02x", 5660 mb(0), mb(1), mb(2), mb(3)); 5661 if (mb(0) != TRIM_POS_OPT || 5662 mb(2) != TRIM_TIME_OPT) 5663 { 5664 (void)trimbletsip_setup(parse, "bad io options"); 5665 } 5666 } 5667 break; 5668 5669 case CMD_RSPOSXYZ: 5670 { 5671 double x = getflt((unsigned char *)&mb(0)); 5672 double y = getflt((unsigned char *)&mb(4)); 5673 double z = getflt((unsigned char *)&mb(8)); 5674 double f = getflt((unsigned char *)&mb(12)); 5675 5676 if (f > 0.0) 5677 t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm, time_of_fix= %f sec", 5678 x, y, z, 5679 f); 5680 else 5681 return; 5682 } 5683 break; 5684 5685 case CMD_RSLLAPOS: 5686 { 5687 double lat = getflt((unsigned char *)&mb(0)); 5688 double lng = getflt((unsigned char *)&mb(4)); 5689 double f = getflt((unsigned char *)&mb(12)); 5690 5691 if (f > 0.0) 5692 t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, long %f %c, alt %.2fm", 5693 ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), 5694 ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), 5695 getflt((unsigned char *)&mb(8))); 5696 else 5697 return; 5698 } 5699 break; 5700 5701 case CMD_RDOUBLEXYZ: 5702 { 5703 double x = getdbl((unsigned char *)&mb(0)); 5704 double y = getdbl((unsigned char *)&mb(8)); 5705 double z = getdbl((unsigned char *)&mb(16)); 5706 t = ap(pbuffer, sizeof(pbuffer), t, "x= %.1fm, y= %.1fm, z= %.1fm", 5707 x, y, z); 5708 } 5709 break; 5710 5711 case CMD_RDOUBLELLA: 5712 { 5713 double lat = getdbl((unsigned char *)&mb(0)); 5714 double lng = getdbl((unsigned char *)&mb(8)); 5715 t = ap(pbuffer, sizeof(pbuffer), t, "lat %f %c, lon %f %c, alt %.2fm", 5716 ((lat < 0.0) ? (-lat) : (lat))*RTOD, (lat < 0.0 ? 'S' : 'N'), 5717 ((lng < 0.0) ? (-lng) : (lng))*RTOD, (lng < 0.0 ? 'W' : 'E'), 5718 getdbl((unsigned char *)&mb(16))); 5719 } 5720 break; 5721 5722 case CMD_RALLINVIEW: 5723 { 5724 int i, sats; 5725 5726 t = ap(pbuffer, sizeof(pbuffer), t, "mode: "); 5727 switch (mb(0) & 0x7) 5728 { 5729 default: 5730 t = ap(pbuffer, sizeof(pbuffer), t, "0x%x", mb(0) & 0x7); 5731 break; 5732 5733 case 3: 5734 t = ap(pbuffer, sizeof(pbuffer), t, "2D"); 5735 break; 5736 5737 case 4: 5738 t = ap(pbuffer, sizeof(pbuffer), t, "3D"); 5739 break; 5740 } 5741 if (mb(0) & 0x8) 5742 t = ap(pbuffer, sizeof(pbuffer), t, "-MANUAL, "); 5743 else 5744 t = ap(pbuffer, sizeof(pbuffer), t, "-AUTO, "); 5745 5746 sats = (mb(0)>>4) & 0xF; 5747 5748 t = ap(pbuffer, sizeof(pbuffer), t, "PDOP %.2f, HDOP %.2f, VDOP %.2f, TDOP %.2f, %d satellite%s in view: ", 5749 getflt((unsigned char *)&mb(1)), 5750 getflt((unsigned char *)&mb(5)), 5751 getflt((unsigned char *)&mb(9)), 5752 getflt((unsigned char *)&mb(13)), 5753 sats, (sats == 1) ? "" : "s"); 5754 5755 for (i=0; i < sats; i++) 5756 { 5757 t = ap(pbuffer, sizeof(pbuffer), t, "%s%02d", i ? ", " : "", mb(17+i)); 5758 if (tr) 5759 tr->ctrack |= (1 << (mb(17+i)-1)); 5760 } 5761 5762 if (tr) 5763 { /* mark for tracking status query */ 5764 tr->qtracking = 1; 5765 } 5766 } 5767 break; 5768 5769 case CMD_RSTATTRACK: 5770 { 5771 t = ap(pbuffer, sizeof(pbuffer), t-2, "[%02d]=\"", mb(0)); /* add index to var name */ 5772 if (getflt((unsigned char *)&mb(4)) < 0.0) 5773 { 5774 t = ap(pbuffer, sizeof(pbuffer), t, "<NO MEASUREMENTS>"); 5775 var_flag &= (u_short)(~DEF); 5776 } 5777 else 5778 { 5779 t = ap(pbuffer, sizeof(pbuffer), t, "ch=%d, acq=%s, eph=%d, signal_level= %5.2f, elevation= %5.2f, azimuth= %6.2f", 5780 (mb(1) & 0xFF)>>3, 5781 mb(2) ? ((mb(2) == 1) ? "ACQ" : "SRCH") : "NEVER", 5782 mb(3), 5783 getflt((unsigned char *)&mb(4)), 5784 getflt((unsigned char *)&mb(12)) * RTOD, 5785 getflt((unsigned char *)&mb(16)) * RTOD); 5786 if (mb(20)) 5787 { 5788 var_flag &= (u_short)(~DEF); 5789 t = ap(pbuffer, sizeof(pbuffer), t, ", OLD"); 5790 } 5791 if (mb(22)) 5792 { 5793 if (mb(22) == 1) 5794 t = ap(pbuffer, sizeof(pbuffer), t, ", BAD PARITY"); 5795 else 5796 if (mb(22) == 2) 5797 t = ap(pbuffer, sizeof(pbuffer), t, ", BAD EPH HEALTH"); 5798 } 5799 if (mb(23)) 5800 t = ap(pbuffer, sizeof(pbuffer), t, ", collecting data"); 5801 } 5802 } 5803 break; 5804 5805 default: 5806 t = ap(pbuffer, sizeof(pbuffer), t, "<UNDECODED>"); 5807 break; 5808 } 5809 5810 t = ap(pbuffer, sizeof(pbuffer), t, "\""); 5811 set_var(&parse->kv, pbuffer, sizeof(pbuffer), var_flag); 5812 } 5813 } 5814 5815 5816 /**============================================================ 5817 ** RAWDCF support 5818 **/ 5819 5820 /*-------------------------------------------------- 5821 * rawdcf_init_1 - set up modem lines for RAWDCF receivers 5822 * SET DTR line 5823 */ 5824 #if defined(TIOCMSET) && (defined(TIOCM_DTR) || defined(CIOCM_DTR)) 5825 static int 5826 rawdcf_init_1( 5827 struct parseunit *parse 5828 ) 5829 { 5830 /* fixed 2000 for using with Linux by Wolfram Pienkoss <wp@bszh.de> */ 5831 /* 5832 * You can use the RS232 to supply the power for a DCF77 receiver. 5833 * Here a voltage between the DTR and the RTS line is used. Unfortunately 5834 * the name has changed from CIOCM_DTR to TIOCM_DTR recently. 5835 */ 5836 int sl232; 5837 5838 if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) 5839 { 5840 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); 5841 return 0; 5842 } 5843 5844 #ifdef TIOCM_DTR 5845 sl232 = (sl232 & ~TIOCM_RTS) | TIOCM_DTR; /* turn on DTR, clear RTS for power supply */ 5846 #else 5847 sl232 = (sl232 & ~CIOCM_RTS) | CIOCM_DTR; /* turn on DTR, clear RTS for power supply */ 5848 #endif 5849 5850 if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) 5851 { 5852 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_DTR): %m", CLK_UNIT(parse->peer)); 5853 } 5854 return 0; 5855 } 5856 #else 5857 static int 5858 rawdcfdtr_init_1( 5859 struct parseunit *parse 5860 ) 5861 { 5862 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_1: WARNING: OS interface incapable of setting DTR to power DCF modules", CLK_UNIT(parse->peer)); 5863 return 0; 5864 } 5865 #endif /* DTR initialisation type */ 5866 5867 /*-------------------------------------------------- 5868 * rawdcf_init_2 - set up modem lines for RAWDCF receivers 5869 * CLR DTR line, SET RTS line 5870 */ 5871 #if defined(TIOCMSET) && (defined(TIOCM_RTS) || defined(CIOCM_RTS)) 5872 static int 5873 rawdcf_init_2( 5874 struct parseunit *parse 5875 ) 5876 { 5877 /* fixed 2000 for using with Linux by Wolfram Pienkoss <wp@bszh.de> */ 5878 /* 5879 * You can use the RS232 to supply the power for a DCF77 receiver. 5880 * Here a voltage between the DTR and the RTS line is used. Unfortunately 5881 * the name has changed from CIOCM_DTR to TIOCM_DTR recently. 5882 */ 5883 int sl232; 5884 5885 if (ioctl(parse->generic->io.fd, TIOCMGET, (caddr_t)&sl232) == -1) 5886 { 5887 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMGET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); 5888 return 0; 5889 } 5890 5891 #ifdef TIOCM_RTS 5892 sl232 = (sl232 & ~TIOCM_DTR) | TIOCM_RTS; /* turn on RTS, clear DTR for power supply */ 5893 #else 5894 sl232 = (sl232 & ~CIOCM_DTR) | CIOCM_RTS; /* turn on RTS, clear DTR for power supply */ 5895 #endif 5896 5897 if (ioctl(parse->generic->io.fd, TIOCMSET, (caddr_t)&sl232) == -1) 5898 { 5899 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: ioctl(fd, TIOCMSET, [C|T]IOCM_RTS): %m", CLK_UNIT(parse->peer)); 5900 } 5901 return 0; 5902 } 5903 #else 5904 static int 5905 rawdcf_init_2( 5906 struct parseunit *parse 5907 ) 5908 { 5909 msyslog(LOG_NOTICE, "PARSE receiver #%d: rawdcf_init_2: WARNING: OS interface incapable of setting RTS to power DCF modules", CLK_UNIT(parse->peer)); 5910 return 0; 5911 } 5912 #endif /* DTR initialisation type */ 5913 5914 #else /* defined(REFCLOCK) && defined(PARSE) */ 5915 NONEMPTY_TRANSLATION_UNIT 5916 #endif /* defined(REFCLOCK) && defined(PARSE) */ 5917 5918 /* 5919 * History: 5920 * 5921 * refclock_parse.c,v 5922 * Revision 4.81 2009/05/01 10:15:29 kardel 5923 * use new refclock_ppsapi interface 5924 * 5925 * Revision 4.80 2007/08/11 12:06:29 kardel 5926 * update comments wrt/ to PPS 5927 * 5928 * Revision 4.79 2007/08/11 11:52:23 kardel 5929 * - terminate io bindings before io_closeclock() will close our file descriptor 5930 * 5931 * Revision 4.78 2006/12/22 20:08:27 kardel 5932 * Bug 746 (RFE): add configuration for Expert mouseCLOCK USB v2.0 as mode 19 5933 * 5934 * Revision 4.77 2006/08/05 07:44:49 kardel 5935 * support optionally separate PPS devices via /dev/refclockpps-{0..3} 5936 * 5937 * Revision 4.76 2006/06/22 18:40:47 kardel 5938 * clean up signedness (gcc 4) 5939 * 5940 * Revision 4.75 2006/06/22 16:58:10 kardel 5941 * Bug #632: call parse_ppsapi() in parse_ctl() when updating 5942 * the PPS offset. Fix sign of offset passed to kernel. 5943 * 5944 * Revision 4.74 2006/06/18 21:18:37 kardel 5945 * NetBSD Coverity CID 3796: possible NULL deref 5946 * 5947 * Revision 4.73 2006/05/26 14:23:46 kardel 5948 * cleanup of copyright info 5949 * 5950 * Revision 4.72 2006/05/26 14:19:43 kardel 5951 * cleanup of ioctl cruft 5952 * 5953 * Revision 4.71 2006/05/26 14:15:57 kardel 5954 * delay adding refclock to async refclock io after all initializations 5955 * 5956 * Revision 4.70 2006/05/25 18:20:50 kardel 5957 * bug #619 5958 * terminate parse io engine after de-registering 5959 * from refclock io engine 5960 * 5961 * Revision 4.69 2006/05/25 17:28:02 kardel 5962 * complete refclock io structure initialization *before* inserting it into the 5963 * refclock input machine (avoids null pointer deref) (bug #619) 5964 * 5965 * Revision 4.68 2006/05/01 17:02:51 kardel 5966 * copy receiver method also for newlwy created receive buffers 5967 * 5968 * Revision 4.67 2006/05/01 14:37:29 kardel 5969 * If an input buffer parses into more than one message do insert the 5970 * parsed message in a new input buffer instead of processing it 5971 * directly. This avoids deed complicated processing in signal 5972 * handling. 5973 * 5974 * Revision 4.66 2006/03/18 00:45:30 kardel 5975 * coverity fixes found in NetBSD coverity scan 5976 * 5977 * Revision 4.65 2006/01/26 06:08:33 kardel 5978 * output errno on PPS setup failure 5979 * 5980 * Revision 4.64 2005/11/09 20:44:47 kardel 5981 * utilize full PPS timestamp resolution from PPS API 5982 * 5983 * Revision 4.63 2005/10/07 22:10:25 kardel 5984 * bounded buffer implementation 5985 * 5986 * Revision 4.62.2.2 2005/09/25 10:20:16 kardel 5987 * avoid unexpected buffer overflows due to sprintf("%f") on strange floats: 5988 * replace almost all str* and *printf functions be their buffer bounded 5989 * counterparts 5990 * 5991 * Revision 4.62.2.1 2005/08/27 16:19:27 kardel 5992 * limit re-set rate of trimble clocks 5993 * 5994 * Revision 4.62 2005/08/06 17:40:00 kardel 5995 * cleanup size handling wrt/ to buffer boundaries 5996 * 5997 * Revision 4.61 2005/07/27 21:16:19 kardel 5998 * fix a long (> 11 years) misconfiguration wrt/ Meinberg cflag factory 5999 * default setup. CSTOPB was missing for the 7E2 default data format of 6000 * the DCF77 clocks. 6001 * 6002 * Revision 4.60 2005/07/17 21:14:44 kardel 6003 * change contents of version string to include the RCS/CVS Id 6004 * 6005 * Revision 4.59 2005/07/06 06:56:38 kardel 6006 * syntax error 6007 * 6008 * Revision 4.58 2005/07/04 13:10:40 kardel 6009 * fix bug 455: tripping over NULL pointer on cleanup 6010 * fix shadow storage logic for ppsphaseadjust and trustime wrt/ time2 6011 * fix compiler warnings for some platforms wrt/ printf formatstrings and 6012 * varying structure element sizes 6013 * reorder assignment in binding to avoid tripping over NULL pointers 6014 * 6015 * Revision 4.57 2005/06/25 09:25:19 kardel 6016 * sort out log output sequence 6017 * 6018 * Revision 4.56 2005/06/14 21:47:27 kardel 6019 * collect samples only if samples are ok (sync or trusted flywheel) 6020 * propagate pps phase adjustment value to kernel via PPSAPI to help HARDPPS 6021 * en- and dis-able HARDPPS in correlation to receiver sync state 6022 * 6023 * Revision 4.55 2005/06/02 21:28:31 kardel 6024 * clarify trust logic 6025 * 6026 * Revision 4.54 2005/06/02 17:06:49 kardel 6027 * change status reporting to use fixed refclock_report() 6028 * 6029 * Revision 4.53 2005/06/02 16:33:31 kardel 6030 * fix acceptance of clocks unsync clocks right at start 6031 * 6032 * Revision 4.52 2005/05/26 21:55:06 kardel 6033 * cleanup status reporting 6034 * 6035 * Revision 4.51 2005/05/26 19:19:14 kardel 6036 * implement fast refclock startup 6037 * 6038 * Revision 4.50 2005/04/16 20:51:35 kardel 6039 * set hardpps_enable = 1 when binding a kernel PPS source 6040 * 6041 * Revision 4.49 2005/04/16 17:29:26 kardel 6042 * add non polling clock type 18 for just listenning to Meinberg clocks 6043 * 6044 * Revision 4.48 2005/04/16 16:22:27 kardel 6045 * bk sync 20050415 ntp-dev 6046 * 6047 * Revision 4.47 2004/11/29 10:42:48 kardel 6048 * bk sync ntp-dev 20041129 6049 * 6050 * Revision 4.46 2004/11/29 10:26:29 kardel 6051 * keep fudgetime2 in sync with trusttime/ppsphaseadjust depending in flag1 6052 * 6053 * Revision 4.45 2004/11/14 20:53:20 kardel 6054 * clear PPS flags after using them 6055 * 6056 * Revision 4.44 2004/11/14 15:29:41 kardel 6057 * support PPSAPI, upgrade Copyright to Berkeley style 6058 * 6059 * Revision 4.43 2001/05/26 22:53:16 kardel 6060 * 20010526 reconcilation 6061 * 6062 * Revision 4.42 2000/05/14 15:31:51 kardel 6063 * PPSAPI && RAWDCF modemline support 6064 * 6065 * Revision 4.41 2000/04/09 19:50:45 kardel 6066 * fixed rawdcfdtr_init() -> rawdcf_init_1 6067 * 6068 * Revision 4.40 2000/04/09 15:27:55 kardel 6069 * modem line fiddle in rawdcf_init_2 6070 * 6071 * Revision 4.39 2000/03/18 09:16:55 kardel 6072 * PPSAPI integration 6073 * 6074 * Revision 4.38 2000/03/05 20:25:06 kardel 6075 * support PPSAPI 6076 * 6077 * Revision 4.37 2000/03/05 20:11:14 kardel 6078 * 4.0.99g reconcilation 6079 * 6080 * Revision 4.36 1999/11/28 17:18:20 kardel 6081 * disabled burst mode 6082 * 6083 * Revision 4.35 1999/11/28 09:14:14 kardel 6084 * RECON_4_0_98F 6085 * 6086 * Revision 4.34 1999/05/14 06:08:05 kardel 6087 * store current_time in a suitable container (u_long) 6088 * 6089 * Revision 4.33 1999/05/13 21:48:38 kardel 6090 * double the no response timeout interval 6091 * 6092 * Revision 4.32 1999/05/13 20:09:13 kardel 6093 * complain only about missing polls after a full poll interval 6094 * 6095 * Revision 4.31 1999/05/13 19:59:32 kardel 6096 * add clock type 16 for RTS set DTR clr in RAWDCF 6097 * 6098 * Revision 4.30 1999/02/28 20:36:43 kardel 6099 * fixed printf fmt 6100 * 6101 * Revision 4.29 1999/02/28 19:58:23 kardel 6102 * updated copyright information 6103 * 6104 * Revision 4.28 1999/02/28 19:01:50 kardel 6105 * improved debug out on sent Meinberg messages 6106 * 6107 * Revision 4.27 1999/02/28 18:05:55 kardel 6108 * no linux/ppsclock.h stuff 6109 * 6110 * Revision 4.26 1999/02/28 15:27:27 kardel 6111 * wharton clock integration 6112 * 6113 * Revision 4.25 1999/02/28 14:04:46 kardel 6114 * added missing double quotes to UTC information string 6115 * 6116 * Revision 4.24 1999/02/28 12:06:50 kardel 6117 * (parse_control): using gmprettydate instead of prettydate() 6118 * (mk_utcinfo): new function for formatting GPS derived UTC information 6119 * (gps16x_message): changed to use mk_utcinfo() 6120 * (trimbletsip_message): changed to use mk_utcinfo() 6121 * ignoring position information in unsynchronized mode 6122 * (parse_start): augument linux support for optional ASYNC_LOW_LATENCY 6123 * 6124 * Revision 4.23 1999/02/23 19:47:53 kardel 6125 * fixed #endifs 6126 * (stream_receive): fixed formats 6127 * 6128 * Revision 4.22 1999/02/22 06:21:02 kardel 6129 * use new autoconfig symbols 6130 * 6131 * Revision 4.21 1999/02/21 12:18:13 kardel 6132 * 4.91f reconcilation 6133 * 6134 * Revision 4.20 1999/02/21 10:53:36 kardel 6135 * initial Linux PPSkit version 6136 * 6137 * Revision 4.19 1999/02/07 09:10:45 kardel 6138 * clarify STREAMS mitigation rules in comment 6139 * 6140 * Revision 4.18 1998/12/20 23:45:34 kardel 6141 * fix types and warnings 6142 * 6143 * Revision 4.17 1998/11/15 21:24:51 kardel 6144 * cannot access mbg_ routines when CLOCK_MEINBERG 6145 * is not defined 6146 * 6147 * Revision 4.16 1998/11/15 20:28:17 kardel 6148 * Release 4.0.73e13 reconcilation 6149 * 6150 * Revision 4.15 1998/08/22 21:56:08 kardel 6151 * fixed IO handling for non-STREAM IO 6152 * 6153 * Revision 4.14 1998/08/16 19:00:48 kardel 6154 * (gps16x_message): reduced UTC parameter information (dropped A0,A1) 6155 * made uval a local variable (killed one of the last globals) 6156 * (sendetx): added logging of messages when in debug mode 6157 * (trimble_check): added periodic checks to facilitate re-initialization 6158 * (trimbletsip_init): made use of EOL character if in non-kernel operation 6159 * (trimbletsip_message): extended message interpretation 6160 * (getdbl): fixed data conversion 6161 * 6162 * Revision 4.13 1998/08/09 22:29:13 kardel 6163 * Trimble TSIP support 6164 * 6165 * Revision 4.12 1998/07/11 10:05:34 kardel 6166 * Release 4.0.73d reconcilation 6167 * 6168 * Revision 4.11 1998/06/14 21:09:42 kardel 6169 * Sun acc cleanup 6170 * 6171 * Revision 4.10 1998/06/13 12:36:45 kardel 6172 * signed/unsigned, name clashes 6173 * 6174 * Revision 4.9 1998/06/12 15:30:00 kardel 6175 * prototype fixes 6176 * 6177 * Revision 4.8 1998/06/12 11:19:42 kardel 6178 * added direct input processing routine for refclocks in 6179 * order to avaiod that single character io gobbles up all 6180 * receive buffers and drops input data. (Problem started 6181 * with fast machines so a character a buffer was possible 6182 * one of the few cases where faster machines break existing 6183 * allocation algorithms) 6184 * 6185 * Revision 4.7 1998/06/06 18:35:20 kardel 6186 * (parse_start): added BURST mode initialisation 6187 * 6188 * Revision 4.6 1998/05/27 06:12:46 kardel 6189 * RAWDCF_BASEDELAY default added 6190 * old comment removed 6191 * casts for ioctl() 6192 * 6193 * Revision 4.5 1998/05/25 22:05:09 kardel 6194 * RAWDCF_SETDTR option removed 6195 * clock type 14 attempts to set DTR for 6196 * power supply of RAWDCF receivers 6197 * 6198 * Revision 4.4 1998/05/24 16:20:47 kardel 6199 * updated comments referencing Meinberg clocks 6200 * added RAWDCF clock with DTR set option as type 14 6201 * 6202 * Revision 4.3 1998/05/24 10:48:33 kardel 6203 * calibrated CONRAD RAWDCF default fudge factor 6204 * 6205 * Revision 4.2 1998/05/24 09:59:35 kardel 6206 * corrected version information (ntpq support) 6207 * 6208 * Revision 4.1 1998/05/24 09:52:31 kardel 6209 * use fixed format only (new IO model) 6210 * output debug to stdout instead of msyslog() 6211 * don't include >"< in ASCII output in order not to confuse 6212 * ntpq parsing 6213 * 6214 * Revision 4.0 1998/04/10 19:52:11 kardel 6215 * Start 4.0 release version numbering 6216 * 6217 * Revision 1.2 1998/04/10 19:28:04 kardel 6218 * initial NTP VERSION 4 integration of PARSE with GPS166 binary support 6219 * derived from 3.105.1.2 from V3 tree 6220 * 6221 * Revision information 3.1 - 3.105 from log deleted 1998/04/10 kardel 6222 * 6223 */ 6224