1Hardware supported by NetBSD/vax _VER includes (but may not be limited to): 2 3 CPU types: 4 5 VAX 11/750, VAX 11/78{0,5}, VAX 8200/8250/8300/8350, 6 VAX 8600/8650, MicroVAX II, MicroVAX III, 7 MicroVAX 3600/3800/3900, MicroVAX 3300/3400/3500, 8 MicroVAX 2000/VAXstation 2000 and some VAXstation 3100. 9 10 Networking: 11 DEUNA/DELUA Unibus ethernet, DEQNA/DELQA Q22 bus ethernet 12 and LANCE chip where available. 13 14 Serial lines: 15 DHU11/DHV11/DL11/DLV11/DZ11/DZQ11/DZV11 Unibus/Q22 bus 16 asynchronous lines and DZ11-compatible lines on 17 VAXstations. 18 19 Disks: 20 UDA50 Unibus MSCP controller, KDA50/RQDX1/2/3 Q22 bus 21 MSCP controller, KDB50 BI-bus MSCP controller, MFM and 22 SCSI controllers on VAXstations, RP04/05/06/07 and 23 RM02/03/05/80 Massbus disks, and Console RL02 on 24 VAX 8600. Some third-party controllers are also 25 known to work, other do not. 26 27 Tapes: 28 TMSCP on Q22 bus (TK50/70), SCSI tapes on VAXstations. 29 30The minimal configuration requires 2M of RAM and ~40MB of disk space, 31but the installation requires at least 4MB RAM and you probably do 32not want to run with anything less than that. 33 34Here is a table of recommended HD partition sizes for a full install: 35 partition: advise needed 36 root (/) 20M 10M 37 user (/usr) 80M 45M 38 swap (2 or 3 * RAM) 39 Anything else is up to you! 40