$NetBSD: SSL_CONF_cmd.3,v 1.2 2018/02/08 21:57:26 christos Exp $

Automatically generated by Pod::Man 4.07 (Pod::Simple 3.32)

Standard preamble:
========================================================================
..

..

.. Set up some character translations and predefined strings. \*(-- will
give an unbreakable dash, \*(PI will give pi, \*(L" will give a left
double quote, and \*(R" will give a right double quote. \*(C+ will
give a nicer C++. Capital omega is used to do unbreakable dashes and
therefore won't be available. \*(C` and \*(C' expand to `' in nroff,
nothing in troff, for use with C<>.
.tr \(*W- . ds -- \(*W- . ds PI pi . if (\n(.H=4u)&(1m=24u) .ds -- \(*W\h'-12u'\(*W\h'-12u'-\" diablo 10 pitch . if (\n(.H=4u)&(1m=20u) .ds -- \(*W\h'-12u'\(*W\h'-8u'-\" diablo 12 pitch . ds L" "" . ds R" "" . ds C` "" . ds C' "" 'br\} . ds -- \|\(em\| . ds PI \(*p . ds L" `` . ds R" '' . ds C` . ds C' 'br\}
Escape single quotes in literal strings from groff's Unicode transform.

If the F register is >0, we'll generate index entries on stderr for
titles (.TH), headers (.SH), subsections (.SS), items (.Ip), and index
entries marked with X<> in POD. Of course, you'll have to process the
output yourself in some meaningful fashion.

Avoid warning from groff about undefined register 'F'.
.. . de IX . tm Index:\\$1\t\\n%\t"\\$2" .. . if !\nF==2 \{\ . nr % 0 . nr F 2 . \} .\}
Accent mark definitions (@(#)ms.acc 1.5 88/02/08 SMI; from UCB 4.2).
Fear. Run. Save yourself. No user-serviceable parts.
. \" fudge factors for nroff and troff . ds #H 0 . ds #V .8m . ds #F .3m . ds #[ \f1 . ds #] .\} . ds #H ((1u-(\\\\n(.fu%2u))*.13m) . ds #V .6m . ds #F 0 . ds #[ \& . ds #] \& .\} . \" simple accents for nroff and troff . ds ' \& . ds ` \& . ds ^ \& . ds , \& . ds ~ ~ . ds / .\} . ds ' \\k:\h'-(\\n(.wu*8/10-\*(#H)'\'\h"|\\n:u" . ds ` \\k:\h'-(\\n(.wu*8/10-\*(#H)'\`\h'|\\n:u' . ds ^ \\k:\h'-(\\n(.wu*10/11-\*(#H)'^\h'|\\n:u' . ds , \\k:\h'-(\\n(.wu*8/10)',\h'|\\n:u' . ds ~ \\k:\h'-(\\n(.wu-\*(#H-.1m)'~\h'|\\n:u' . ds / \\k:\h'-(\\n(.wu*8/10-\*(#H)'\z\(sl\h'|\\n:u' .\} . \" troff and (daisy-wheel) nroff accents . \" corrections for vroff . \" for low resolution devices (crt and lpr) \{\ . ds : e . ds 8 ss . ds o a . ds d- d\h'-1'\(ga . ds D- D\h'-1'\(hy . ds th \o'bp' . ds Th \o'LP' . ds ae ae . ds Ae AE .\} ========================================================================

Title "SSL_CONF_cmd 3" For nroff, turn off justification. Always turn off hyphenation; it makes
way too many mistakes in technical documents.
SSL_CONF_cmd_value_type, SSL_CONF_finish, SSL_CONF_cmd - send configuration command libcrypto, -lcrypto Header "SYNOPSIS" .Vb 1 #include <openssl/ssl.h> \& int SSL_CONF_cmd(SSL_CONF_CTX *cctx, const char *cmd, const char *value); int SSL_CONF_cmd_value_type(SSL_CONF_CTX *cctx, const char *cmd); int SSL_CONF_finish(SSL_CONF_CTX *cctx); .Ve Header "DESCRIPTION" The function SSL_CONF_cmd() performs configuration operation cmd with optional parameter value on ctx. Its purpose is to simplify application configuration of \s-1SSL_CTX\s0 or \s-1SSL\s0 structures by providing a common framework for command line options or configuration files.

\fISSL_CONF_cmd_value_type() returns the type of value that cmd refers to.

The function SSL_CONF_finish() must be called after all configuration operations have been completed. It is used to finalise any operations or to process defaults.

Header "SUPPORTED COMMAND LINE COMMANDS" Currently supported cmd names for command lines (i.e. when the flag \s-1SSL_CONF_CMDLINE\s0 is set) are listed below. Note: all cmd names are case sensitive. Unless otherwise stated commands can be used by both clients and servers and the value parameter is not used. The default prefix for command line commands is - and that is reflected below. Item "-sigalgs" This sets the supported signature algorithms for \s-1TLS\s0 v1.2. For clients this value is used directly for the supported signature algorithms extension. For servers it is used to determine which signature algorithms to support. .Sp The value argument should be a colon separated list of signature algorithms in order of decreasing preference of the form algorithm+hash. algorithm is one of \s-1RSA\s0, \s-1DSA\s0 or \s-1ECDSA\s0 and hash is a supported algorithm \s-1OID\s0 short name such as \s-1SHA1\s0, \s-1SHA224\s0, \s-1SHA256\s0, \s-1SHA384\s0 of \s-1SHA512\s0. Note: algorithm and hash names are case sensitive. .Sp If this option is not set then all signature algorithms supported by the OpenSSL library are permissible. Item "-client_sigalgs" This sets the supported signature algorithms associated with client authentication for \s-1TLS\s0 v1.2. For servers the value is used in the supported signature algorithms field of a certificate request. For clients it is used to determine which signature algorithm to with the client certificate. If a server does not request a certificate this option has no effect. .Sp The syntax of value is identical to -sigalgs. If not set then the value set for -sigalgs will be used instead. Item "-curves" This sets the supported elliptic curves. For clients the curves are sent using the supported curves extension. For servers it is used to determine which curve to use. This setting affects curves used for both signatures and key exchange, if applicable. .Sp The value argument is a colon separated list of curves. The curve can be either the \s-1NIST\s0 name (e.g. P-256) or an OpenSSL \s-1OID\s0 name (e.g \fBprime256v1). Curve names are case sensitive. Item "-named_curve" This sets the temporary curve used for ephemeral \s-1ECDH\s0 modes. Only used by servers .Sp The value argument is a curve name or the special value auto which picks an appropriate curve based on client and server preferences. The curve can be either the \s-1NIST\s0 name (e.g. P-256) or an OpenSSL \s-1OID\s0 name (e.g prime256v1). Curve names are case sensitive. Item "-cipher" Sets the cipher suite list to value. Note: syntax checking of value is currently not performed unless a \s-1SSL\s0 or \s-1SSL_CTX\s0 structure is associated with cctx. Item "-cert" Attempts to use the file value as the certificate for the appropriate context. It currently uses SSL_CTX_use_certificate_chain_file() if an \s-1SSL_CTX\s0 structure is set or SSL_use_certificate_file() with filetype \s-1PEM\s0 if an \s-1SSL\s0 structure is set. This option is only supported if certificate operations are permitted. Item "-key" Attempts to use the file value as the private key for the appropriate context. This option is only supported if certificate operations are permitted. Note: if no -key option is set then a private key is not loaded unless the flag \s-1SSL_CONF_FLAG_REQUIRE_PRIVATE\s0 is set. Item "-dhparam" Attempts to use the file value as the set of temporary \s-1DH\s0 parameters for the appropriate context. This option is only supported if certificate operations are permitted. Item "-min_protocol, -max_protocol" Sets the minimum and maximum supported protocol. Currently supported protocol values are SSLv3, TLSv1, \fBTLSv1.1, TLSv1.2 for \s-1TLS\s0 and DTLSv1, DTLSv1.2 for \s-1DTLS,\s0 and None for no limit. If the either bound is not specified then only the other bound applies, if specified. To restrict the supported protocol versions use these commands rather than the deprecated alternative commands below. Item "-no_ssl3, -no_tls1, -no_tls1_1, -no_tls1_2" Disables protocol support for SSLv3, TLSv1.0, TLSv1.1 or TLSv1.2 by setting the corresponding options SSL_OP_NO_SSLv3, SSL_OP_NO_TLSv1, SSL_OP_NO_TLSv1_1 and SSL_OP_NO_TLSv1_2 respectively. These options are deprecated, instead use -min_protocol and -max_protocol. Item "-bugs" Various bug workarounds are set, same as setting \s-1SSL_OP_ALL\s0. Item "-comp" Enables support for \s-1SSL/TLS\s0 compression, same as clearing \fB\s-1SSL_OP_NO_COMPRESSION\s0. This command was introduced in OpenSSL 1.1.0. As of OpenSSL 1.1.0, compression is off by default. Item "-no_comp" Disables support for \s-1SSL/TLS\s0 compression, same as setting \fB\s-1SSL_OP_NO_COMPRESSION\s0. As of OpenSSL 1.1.0, compression is off by default. Item "-no_ticket" Disables support for session tickets, same as setting \s-1SSL_OP_NO_TICKET\s0. Item "-serverpref" Use server and not client preference order when determining which cipher suite, signature algorithm or elliptic curve to use for an incoming connection. Equivalent to \s-1SSL_OP_CIPHER_SERVER_PREFERENCE\s0. Only used by servers. Item "-no_resumption_on_reneg" set \s-1SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION\s0 flag. Only used by servers. Item "-legacyrenegotiation" permits the use of unsafe legacy renegotiation. Equivalent to setting \fB\s-1SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION\s0. Item "-legacy_server_connect, -no_legacy_server_connect" permits or prohibits the use of unsafe legacy renegotiation for OpenSSL clients only. Equivalent to setting or clearing \s-1SSL_OP_LEGACY_SERVER_CONNECT\s0. Set by default. Item "-strict" enables strict mode protocol handling. Equivalent to setting \fB\s-1SSL_CERT_FLAG_TLS_STRICT\s0. Header "SUPPORTED CONFIGURATION FILE COMMANDS" Currently supported cmd names for configuration files (i.e. when the flag \s-1SSL_CONF_FLAG_FILE\s0 is set) are listed below. All configuration file \fBcmd names are case insensitive so signaturealgorithms is recognised as well as SignatureAlgorithms. Unless otherwise stated the value names are also case insensitive.

Note: the command prefix (if set) alters the recognised cmd values.

Item "CipherString" Sets the cipher suite list to value. Note: syntax checking of value is currently not performed unless an \s-1SSL\s0 or \s-1SSL_CTX\s0 structure is associated with cctx. Item "Certificate" Attempts to use the file value as the certificate for the appropriate context. It currently uses SSL_CTX_use_certificate_chain_file() if an \s-1SSL_CTX\s0 structure is set or SSL_use_certificate_file() with filetype \s-1PEM\s0 if an \s-1SSL\s0 structure is set. This option is only supported if certificate operations are permitted. Item "PrivateKey" Attempts to use the file value as the private key for the appropriate context. This option is only supported if certificate operations are permitted. Note: if no PrivateKey option is set then a private key is not loaded unless the \s-1SSL_CONF_FLAG_REQUIRE_PRIVATE\s0 is set. Item "ChainCAFile, ChainCAPath, VerifyCAFile, VerifyCAPath" These options indicate a file or directory used for building certificate chains or verifying certificate chains. These options are only supported if certificate operations are permitted. Item "ServerInfoFile" Attempts to use the file value in the \*(L"serverinfo\*(R" extension using the function SSL_CTX_use_serverinfo_file. Item "DHParameters" Attempts to use the file value as the set of temporary \s-1DH\s0 parameters for the appropriate context. This option is only supported if certificate operations are permitted. Item "SignatureAlgorithms" This sets the supported signature algorithms for \s-1TLS\s0 v1.2. For clients this value is used directly for the supported signature algorithms extension. For servers it is used to determine which signature algorithms to support. .Sp The value argument should be a colon separated list of signature algorithms in order of decreasing preference of the form algorithm+hash. algorithm is one of \s-1RSA\s0, \s-1DSA\s0 or \s-1ECDSA\s0 and hash is a supported algorithm \s-1OID\s0 short name such as \s-1SHA1\s0, \s-1SHA224\s0, \s-1SHA256\s0, \s-1SHA384\s0 of \s-1SHA512\s0. Note: algorithm and hash names are case sensitive. .Sp If this option is not set then all signature algorithms supported by the OpenSSL library are permissible. Item "ClientSignatureAlgorithms" This sets the supported signature algorithms associated with client authentication for \s-1TLS\s0 v1.2. For servers the value is used in the supported signature algorithms field of a certificate request. For clients it is used to determine which signature algorithm to with the client certificate. .Sp The syntax of value is identical to SignatureAlgorithms. If not set then the value set for SignatureAlgorithms will be used instead. Item "Curves" This sets the supported elliptic curves. For clients the curves are sent using the supported curves extension. For servers it is used to determine which curve to use. This setting affects curves used for both signatures and key exchange, if applicable. .Sp The value argument is a colon separated list of curves. The curve can be either the \s-1NIST\s0 name (e.g. P-256) or an OpenSSL \s-1OID\s0 name (e.g \fBprime256v1). Curve names are case sensitive. Item "MinProtocol" This sets the minimum supported \s-1SSL, TLS\s0 or \s-1DTLS\s0 version. .Sp Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, \fBTLSv1.2, DTLSv1 and DTLSv1.2. The value None will disable the limit. Item "MaxProtocol" This sets the maximum supported \s-1SSL, TLS\s0 or \s-1DTLS\s0 version. .Sp Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, \fBTLSv1.2, DTLSv1 and DTLSv1.2. The value None will disable the limit. Item "Protocol" This can be used to enable or disable certain versions of the \s-1SSL, TLS\s0 or \s-1DTLS\s0 protocol. .Sp The value argument is a comma separated list of supported protocols to enable or disable. If a protocol is preceded by - that version is disabled. .Sp All protocol versions are enabled by default. You need to disable at least one protocol version for this setting have any effect. Only enabling some protocol versions does not disable the other protocol versions. .Sp Currently supported protocol values are SSLv3, TLSv1, TLSv1.1, \fBTLSv1.2, DTLSv1 and DTLSv1.2. The special value \s-1ALL\s0 refers to all supported versions. .Sp This can't enable protocols that are disabled using MinProtocol or MaxProtocol, but can disable protocols that are still allowed by them. .Sp The Protocol command is fragile and deprecated; do not use it. Use MinProtocol and MaxProtocol instead. If you do use Protocol, make sure that the resulting range of enabled protocols has no \*(L"holes\*(R", e.g. if \s-1TLS 1.0\s0 and \s-1TLS 1.2\s0 are both enabled, make sure to also leave \s-1TLS 1.1\s0 enabled. Item "Options" The value argument is a comma separated list of various flags to set. If a flag string is preceded - it is disabled. See the SSL_CTX_set_options\|(3) function for more details of individual options. .Sp Each option is listed below. Where an operation is enabled by default the -flag syntax is needed to disable it. .Sp \fBSessionTicket: session ticket support, enabled by default. Inverse of \fB\s-1SSL_OP_NO_TICKET\s0: that is -SessionTicket is the same as setting \fB\s-1SSL_OP_NO_TICKET\s0. .Sp \fBCompression: \s-1SSL/TLS\s0 compression support, enabled by default. Inverse of \s-1SSL_OP_NO_COMPRESSION\s0. .Sp \fBEmptyFragments: use empty fragments as a countermeasure against a \s-1SSL 3.0/TLS 1.0\s0 protocol vulnerability affecting \s-1CBC\s0 ciphers. It is set by default. Inverse of \s-1SSL_OP_DONT_INSERT_EMPTY_FRAGMENTS\s0. .Sp \fBBugs: enable various bug workarounds. Same as \s-1SSL_OP_ALL\s0. .Sp \fBDHSingle: enable single use \s-1DH\s0 keys, set by default. Inverse of \fB\s-1SSL_OP_DH_SINGLE\s0. Only used by servers. .Sp \fBECDHSingle enable single use \s-1ECDH\s0 keys, set by default. Inverse of \fB\s-1SSL_OP_ECDH_SINGLE\s0. Only used by servers. .Sp \fBServerPreference use server and not client preference order when determining which cipher suite, signature algorithm or elliptic curve to use for an incoming connection. Equivalent to \fB\s-1SSL_OP_CIPHER_SERVER_PREFERENCE\s0. Only used by servers. .Sp \fBNoResumptionOnRenegotiation set \fB\s-1SSL_OP_NO_SESSION_RESUMPTION_ON_RENEGOTIATION\s0 flag. Only used by servers. .Sp \fBUnsafeLegacyRenegotiation permits the use of unsafe legacy renegotiation. Equivalent to \s-1SSL_OP_ALLOW_UNSAFE_LEGACY_RENEGOTIATION\s0. .Sp \fBUnsafeLegacyServerConnect permits the use of unsafe legacy renegotiation for OpenSSL clients only. Equivalent to \s-1SSL_OP_LEGACY_SERVER_CONNECT\s0. Set by default. Item "VerifyMode" The value argument is a comma separated list of flags to set. .Sp \fBPeer enables peer verification: for clients only. .Sp \fBRequest requests but does not require a certificate from the client. Servers only. .Sp \fBRequire requests and requires a certificate from the client: an error occurs if the client does not present a certificate. Servers only. .Sp \fBOnce requests a certificate from a client only on the initial connection: not when renegotiating. Servers only. Item "ClientCAFile, ClientCAPath" A file or directory of certificates in \s-1PEM\s0 format whose names are used as the set of acceptable names for client CAs. Servers only. This option is only supported if certificate operations are permitted. Header "SUPPORTED COMMAND TYPES" The function SSL_CONF_cmd_value_type() currently returns one of the following types: Item "SSL_CONF_TYPE_UNKNOWN" The cmd string is unrecognised, this return value can be use to flag syntax errors. Item "SSL_CONF_TYPE_STRING" The value is a string without any specific structure. Item "SSL_CONF_TYPE_FILE" The value is a file name. Item "SSL_CONF_TYPE_DIR" The value is a directory name. Item "SSL_CONF_TYPE_NONE" The value string is not used e.g. a command line option which doesn't take an argument. Header "NOTES" The order of operations is significant. This can be used to set either defaults or values which cannot be overridden. For example if an application calls:

.Vb 2 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3"); SSL_CONF_cmd(ctx, userparam, uservalue); .Ve

it will disable SSLv3 support by default but the user can override it. If however the call sequence is:

.Vb 2 SSL_CONF_cmd(ctx, userparam, uservalue); SSL_CONF_cmd(ctx, "Protocol", "-SSLv3"); .Ve

SSLv3 is always disabled and attempt to override this by the user are ignored.

By checking the return code of SSL_CTX_cmd() it is possible to query if a given cmd is recognised, this is useful is SSL_CTX_cmd() values are mixed with additional application specific operations.

For example an application might call SSL_CTX_cmd() and if it returns \-2 (unrecognised command) continue with processing of application specific commands.

Applications can also use SSL_CTX_cmd() to process command lines though the utility function SSL_CTX_cmd_argv() is normally used instead. One way to do this is to set the prefix to an appropriate value using \fISSL_CONF_CTX_set1_prefix(), pass the current argument to cmd and the following argument to value (which may be \s-1NULL\s0).

In this case if the return value is positive then it is used to skip that number of arguments as they have been processed by SSL_CTX_cmd(). If -2 is returned then cmd is not recognised and application specific arguments can be checked instead. If -3 is returned a required argument is missing and an error is indicated. If 0 is returned some other error occurred and this can be reported back to the user.

The function SSL_CONF_cmd_value_type() can be used by applications to check for the existence of a command or to perform additional syntax checking or translation of the command value. For example if the return value is \s-1SSL_CONF_TYPE_FILE\s0 an application could translate a relative pathname to an absolute pathname.

Header "EXAMPLES" Set supported signature algorithms:

.Vb 1 SSL_CONF_cmd(ctx, "SignatureAlgorithms", "ECDSA+SHA256:RSA+SHA256:DSA+SHA256"); .Ve

There are various ways to select the supported protocols.

This set the minimum protocol version to TLSv1, and so disables SSLv3. This is the recommended way to disable protocols.

.Vb 1 SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1"); .Ve

The following also disables SSLv3:

.Vb 1 SSL_CONF_cmd(ctx, "Protocol", "-SSLv3"); .Ve

The following will first enable all protocols, and then disable SSLv3. If no protocol versions were disabled before this has the same effect as \*(L"-SSLv3\*(R", but if some versions were disables this will re-enable them before disabling SSLv3.

.Vb 1 SSL_CONF_cmd(ctx, "Protocol", "ALL,-SSLv3"); .Ve

Only enable TLSv1.2:

.Vb 2 SSL_CONF_cmd(ctx, "MinProtocol", "TLSv1.2"); SSL_CONF_cmd(ctx, "MaxProtocol", "TLSv1.2"); .Ve

This also only enables TLSv1.2:

.Vb 1 SSL_CONF_cmd(ctx, "Protocol", "-ALL,TLSv1.2"); .Ve

Disable \s-1TLS\s0 session tickets:

.Vb 1 SSL_CONF_cmd(ctx, "Options", "-SessionTicket"); .Ve

Enable compression:

.Vb 1 SSL_CONF_cmd(ctx, "Options", "Compression"); .Ve

Set supported curves to P-256, P-384:

.Vb 1 SSL_CONF_cmd(ctx, "Curves", "P-256:P-384"); .Ve

Set automatic support for any elliptic curve for key exchange:

.Vb 1 SSL_CONF_cmd(ctx, "ECDHParameters", "Automatic"); .Ve

Header "RETURN VALUES" \fISSL_CONF_cmd() returns 1 if the value of cmd is recognised and value is \fB\s-1NOT\s0 used and 2 if both cmd and value are used. In other words it returns the number of arguments processed. This is useful when processing command lines.

A return value of -2 means cmd is not recognised.

A return value of -3 means cmd is recognised and the command requires a value but value is \s-1NULL.\s0

A return code of 0 indicates that both cmd and value are valid but an error occurred attempting to perform the operation: for example due to an error in the syntax of value in this case the error queue may provide additional information.

\fISSL_CONF_finish() returns 1 for success and 0 for failure.

Header "SEE ALSO" \fISSL_CONF_CTX_new\|(3), \fISSL_CONF_CTX_set_flags\|(3), \fISSL_CONF_CTX_set1_prefix\|(3), \fISSL_CONF_CTX_set_ssl_ctx\|(3), \fISSL_CONF_cmd_argv\|(3), \fISSL_CTX_set_options\|(3) Header "HISTORY" \fISSL_CONF_cmd() was first added to OpenSSL 1.0.2

\fB\s-1SSL_OP_NO_SSL2\s0 doesn't have effect since 1.1.0, but the macro is retained for backwards compatibility.

\fB\s-1SSL_CONF_TYPE_NONE\s0 was first added to OpenSSL 1.1.0. In earlier versions of OpenSSL passing a command which didn't take an argument would return \fB\s-1SSL_CONF_TYPE_UNKNOWN\s0.

\fBMinProtocol and MaxProtocol where added in OpenSSL 1.1.0.

Header "COPYRIGHT" Copyright 2012-2016 The OpenSSL Project Authors. All Rights Reserved.

Licensed under the OpenSSL license (the \*(L"License\*(R"). You may not use this file except in compliance with the License. You can obtain a copy in the file \s-1LICENSE\s0 in the source distribution or at <https://www.openssl.org/source/license.html>.