1 //===-- PPCFrameLowering.cpp - PPC Frame Information ----------------------===// 2 // 3 // The LLVM Compiler Infrastructure 4 // 5 // This file is distributed under the University of Illinois Open Source 6 // License. See LICENSE.TXT for details. 7 // 8 //===----------------------------------------------------------------------===// 9 // 10 // This file contains the PPC implementation of TargetFrameLowering class. 11 // 12 //===----------------------------------------------------------------------===// 13 14 #include "PPCFrameLowering.h" 15 #include "PPCInstrBuilder.h" 16 #include "PPCInstrInfo.h" 17 #include "PPCMachineFunctionInfo.h" 18 #include "PPCSubtarget.h" 19 #include "llvm/CodeGen/MachineFrameInfo.h" 20 #include "llvm/CodeGen/MachineFunction.h" 21 #include "llvm/CodeGen/MachineInstrBuilder.h" 22 #include "llvm/CodeGen/MachineModuleInfo.h" 23 #include "llvm/CodeGen/MachineRegisterInfo.h" 24 #include "llvm/CodeGen/RegisterScavenging.h" 25 #include "llvm/IR/Function.h" 26 #include "llvm/Target/TargetOptions.h" 27 28 using namespace llvm; 29 30 /// VRRegNo - Map from a numbered VR register to its enum value. 31 /// 32 static const uint16_t VRRegNo[] = { 33 PPC::V0 , PPC::V1 , PPC::V2 , PPC::V3 , PPC::V4 , PPC::V5 , PPC::V6 , PPC::V7 , 34 PPC::V8 , PPC::V9 , PPC::V10, PPC::V11, PPC::V12, PPC::V13, PPC::V14, PPC::V15, 35 PPC::V16, PPC::V17, PPC::V18, PPC::V19, PPC::V20, PPC::V21, PPC::V22, PPC::V23, 36 PPC::V24, PPC::V25, PPC::V26, PPC::V27, PPC::V28, PPC::V29, PPC::V30, PPC::V31 37 }; 38 39 PPCFrameLowering::PPCFrameLowering(const PPCSubtarget &STI) 40 : TargetFrameLowering(TargetFrameLowering::StackGrowsDown, 41 (STI.hasQPX() || STI.isBGQ()) ? 32 : 16, 0), 42 Subtarget(STI) {} 43 44 // With the SVR4 ABI, callee-saved registers have fixed offsets on the stack. 45 const PPCFrameLowering::SpillSlot *PPCFrameLowering::getCalleeSavedSpillSlots( 46 unsigned &NumEntries) const { 47 if (Subtarget.isDarwinABI()) { 48 NumEntries = 1; 49 if (Subtarget.isPPC64()) { 50 static const SpillSlot darwin64Offsets = {PPC::X31, -8}; 51 return &darwin64Offsets; 52 } else { 53 static const SpillSlot darwinOffsets = {PPC::R31, -4}; 54 return &darwinOffsets; 55 } 56 } 57 58 // Early exit if not using the SVR4 ABI. 59 if (!Subtarget.isSVR4ABI()) { 60 NumEntries = 0; 61 return nullptr; 62 } 63 64 // Note that the offsets here overlap, but this is fixed up in 65 // processFunctionBeforeFrameFinalized. 66 67 static const SpillSlot Offsets[] = { 68 // Floating-point register save area offsets. 69 {PPC::F31, -8}, 70 {PPC::F30, -16}, 71 {PPC::F29, -24}, 72 {PPC::F28, -32}, 73 {PPC::F27, -40}, 74 {PPC::F26, -48}, 75 {PPC::F25, -56}, 76 {PPC::F24, -64}, 77 {PPC::F23, -72}, 78 {PPC::F22, -80}, 79 {PPC::F21, -88}, 80 {PPC::F20, -96}, 81 {PPC::F19, -104}, 82 {PPC::F18, -112}, 83 {PPC::F17, -120}, 84 {PPC::F16, -128}, 85 {PPC::F15, -136}, 86 {PPC::F14, -144}, 87 88 // General register save area offsets. 89 {PPC::R31, -4}, 90 {PPC::R30, -8}, 91 {PPC::R29, -12}, 92 {PPC::R28, -16}, 93 {PPC::R27, -20}, 94 {PPC::R26, -24}, 95 {PPC::R25, -28}, 96 {PPC::R24, -32}, 97 {PPC::R23, -36}, 98 {PPC::R22, -40}, 99 {PPC::R21, -44}, 100 {PPC::R20, -48}, 101 {PPC::R19, -52}, 102 {PPC::R18, -56}, 103 {PPC::R17, -60}, 104 {PPC::R16, -64}, 105 {PPC::R15, -68}, 106 {PPC::R14, -72}, 107 108 // CR save area offset. We map each of the nonvolatile CR fields 109 // to the slot for CR2, which is the first of the nonvolatile CR 110 // fields to be assigned, so that we only allocate one save slot. 111 // See PPCRegisterInfo::hasReservedSpillSlot() for more information. 112 {PPC::CR2, -4}, 113 114 // VRSAVE save area offset. 115 {PPC::VRSAVE, -4}, 116 117 // Vector register save area 118 {PPC::V31, -16}, 119 {PPC::V30, -32}, 120 {PPC::V29, -48}, 121 {PPC::V28, -64}, 122 {PPC::V27, -80}, 123 {PPC::V26, -96}, 124 {PPC::V25, -112}, 125 {PPC::V24, -128}, 126 {PPC::V23, -144}, 127 {PPC::V22, -160}, 128 {PPC::V21, -176}, 129 {PPC::V20, -192}}; 130 131 static const SpillSlot Offsets64[] = { 132 // Floating-point register save area offsets. 133 {PPC::F31, -8}, 134 {PPC::F30, -16}, 135 {PPC::F29, -24}, 136 {PPC::F28, -32}, 137 {PPC::F27, -40}, 138 {PPC::F26, -48}, 139 {PPC::F25, -56}, 140 {PPC::F24, -64}, 141 {PPC::F23, -72}, 142 {PPC::F22, -80}, 143 {PPC::F21, -88}, 144 {PPC::F20, -96}, 145 {PPC::F19, -104}, 146 {PPC::F18, -112}, 147 {PPC::F17, -120}, 148 {PPC::F16, -128}, 149 {PPC::F15, -136}, 150 {PPC::F14, -144}, 151 152 // General register save area offsets. 153 {PPC::X31, -8}, 154 {PPC::X30, -16}, 155 {PPC::X29, -24}, 156 {PPC::X28, -32}, 157 {PPC::X27, -40}, 158 {PPC::X26, -48}, 159 {PPC::X25, -56}, 160 {PPC::X24, -64}, 161 {PPC::X23, -72}, 162 {PPC::X22, -80}, 163 {PPC::X21, -88}, 164 {PPC::X20, -96}, 165 {PPC::X19, -104}, 166 {PPC::X18, -112}, 167 {PPC::X17, -120}, 168 {PPC::X16, -128}, 169 {PPC::X15, -136}, 170 {PPC::X14, -144}, 171 172 // VRSAVE save area offset. 173 {PPC::VRSAVE, -4}, 174 175 // Vector register save area 176 {PPC::V31, -16}, 177 {PPC::V30, -32}, 178 {PPC::V29, -48}, 179 {PPC::V28, -64}, 180 {PPC::V27, -80}, 181 {PPC::V26, -96}, 182 {PPC::V25, -112}, 183 {PPC::V24, -128}, 184 {PPC::V23, -144}, 185 {PPC::V22, -160}, 186 {PPC::V21, -176}, 187 {PPC::V20, -192}}; 188 189 if (Subtarget.isPPC64()) { 190 NumEntries = array_lengthof(Offsets64); 191 192 return Offsets64; 193 } else { 194 NumEntries = array_lengthof(Offsets); 195 196 return Offsets; 197 } 198 } 199 200 /// RemoveVRSaveCode - We have found that this function does not need any code 201 /// to manipulate the VRSAVE register, even though it uses vector registers. 202 /// This can happen when the only registers used are known to be live in or out 203 /// of the function. Remove all of the VRSAVE related code from the function. 204 /// FIXME: The removal of the code results in a compile failure at -O0 when the 205 /// function contains a function call, as the GPR containing original VRSAVE 206 /// contents is spilled and reloaded around the call. Without the prolog code, 207 /// the spill instruction refers to an undefined register. This code needs 208 /// to account for all uses of that GPR. 209 static void RemoveVRSaveCode(MachineInstr *MI) { 210 MachineBasicBlock *Entry = MI->getParent(); 211 MachineFunction *MF = Entry->getParent(); 212 213 // We know that the MTVRSAVE instruction immediately follows MI. Remove it. 214 MachineBasicBlock::iterator MBBI = MI; 215 ++MBBI; 216 assert(MBBI != Entry->end() && MBBI->getOpcode() == PPC::MTVRSAVE); 217 MBBI->eraseFromParent(); 218 219 bool RemovedAllMTVRSAVEs = true; 220 // See if we can find and remove the MTVRSAVE instruction from all of the 221 // epilog blocks. 222 for (MachineFunction::iterator I = MF->begin(), E = MF->end(); I != E; ++I) { 223 // If last instruction is a return instruction, add an epilogue 224 if (!I->empty() && I->back().isReturn()) { 225 bool FoundIt = false; 226 for (MBBI = I->end(); MBBI != I->begin(); ) { 227 --MBBI; 228 if (MBBI->getOpcode() == PPC::MTVRSAVE) { 229 MBBI->eraseFromParent(); // remove it. 230 FoundIt = true; 231 break; 232 } 233 } 234 RemovedAllMTVRSAVEs &= FoundIt; 235 } 236 } 237 238 // If we found and removed all MTVRSAVE instructions, remove the read of 239 // VRSAVE as well. 240 if (RemovedAllMTVRSAVEs) { 241 MBBI = MI; 242 assert(MBBI != Entry->begin() && "UPDATE_VRSAVE is first instr in block?"); 243 --MBBI; 244 assert(MBBI->getOpcode() == PPC::MFVRSAVE && "VRSAVE instrs wandered?"); 245 MBBI->eraseFromParent(); 246 } 247 248 // Finally, nuke the UPDATE_VRSAVE. 249 MI->eraseFromParent(); 250 } 251 252 // HandleVRSaveUpdate - MI is the UPDATE_VRSAVE instruction introduced by the 253 // instruction selector. Based on the vector registers that have been used, 254 // transform this into the appropriate ORI instruction. 255 static void HandleVRSaveUpdate(MachineInstr *MI, const TargetInstrInfo &TII) { 256 MachineFunction *MF = MI->getParent()->getParent(); 257 const TargetRegisterInfo *TRI = MF->getSubtarget().getRegisterInfo(); 258 DebugLoc dl = MI->getDebugLoc(); 259 260 unsigned UsedRegMask = 0; 261 for (unsigned i = 0; i != 32; ++i) 262 if (MF->getRegInfo().isPhysRegUsed(VRRegNo[i])) 263 UsedRegMask |= 1 << (31-i); 264 265 // Live in and live out values already must be in the mask, so don't bother 266 // marking them. 267 for (MachineRegisterInfo::livein_iterator 268 I = MF->getRegInfo().livein_begin(), 269 E = MF->getRegInfo().livein_end(); I != E; ++I) { 270 unsigned RegNo = TRI->getEncodingValue(I->first); 271 if (VRRegNo[RegNo] == I->first) // If this really is a vector reg. 272 UsedRegMask &= ~(1 << (31-RegNo)); // Doesn't need to be marked. 273 } 274 275 // Live out registers appear as use operands on return instructions. 276 for (MachineFunction::const_iterator BI = MF->begin(), BE = MF->end(); 277 UsedRegMask != 0 && BI != BE; ++BI) { 278 const MachineBasicBlock &MBB = *BI; 279 if (MBB.empty() || !MBB.back().isReturn()) 280 continue; 281 const MachineInstr &Ret = MBB.back(); 282 for (unsigned I = 0, E = Ret.getNumOperands(); I != E; ++I) { 283 const MachineOperand &MO = Ret.getOperand(I); 284 if (!MO.isReg() || !PPC::VRRCRegClass.contains(MO.getReg())) 285 continue; 286 unsigned RegNo = TRI->getEncodingValue(MO.getReg()); 287 UsedRegMask &= ~(1 << (31-RegNo)); 288 } 289 } 290 291 // If no registers are used, turn this into a copy. 292 if (UsedRegMask == 0) { 293 // Remove all VRSAVE code. 294 RemoveVRSaveCode(MI); 295 return; 296 } 297 298 unsigned SrcReg = MI->getOperand(1).getReg(); 299 unsigned DstReg = MI->getOperand(0).getReg(); 300 301 if ((UsedRegMask & 0xFFFF) == UsedRegMask) { 302 if (DstReg != SrcReg) 303 BuildMI(*MI->getParent(), MI, dl, TII.get(PPC::ORI), DstReg) 304 .addReg(SrcReg) 305 .addImm(UsedRegMask); 306 else 307 BuildMI(*MI->getParent(), MI, dl, TII.get(PPC::ORI), DstReg) 308 .addReg(SrcReg, RegState::Kill) 309 .addImm(UsedRegMask); 310 } else if ((UsedRegMask & 0xFFFF0000) == UsedRegMask) { 311 if (DstReg != SrcReg) 312 BuildMI(*MI->getParent(), MI, dl, TII.get(PPC::ORIS), DstReg) 313 .addReg(SrcReg) 314 .addImm(UsedRegMask >> 16); 315 else 316 BuildMI(*MI->getParent(), MI, dl, TII.get(PPC::ORIS), DstReg) 317 .addReg(SrcReg, RegState::Kill) 318 .addImm(UsedRegMask >> 16); 319 } else { 320 if (DstReg != SrcReg) 321 BuildMI(*MI->getParent(), MI, dl, TII.get(PPC::ORIS), DstReg) 322 .addReg(SrcReg) 323 .addImm(UsedRegMask >> 16); 324 else 325 BuildMI(*MI->getParent(), MI, dl, TII.get(PPC::ORIS), DstReg) 326 .addReg(SrcReg, RegState::Kill) 327 .addImm(UsedRegMask >> 16); 328 329 BuildMI(*MI->getParent(), MI, dl, TII.get(PPC::ORI), DstReg) 330 .addReg(DstReg, RegState::Kill) 331 .addImm(UsedRegMask & 0xFFFF); 332 } 333 334 // Remove the old UPDATE_VRSAVE instruction. 335 MI->eraseFromParent(); 336 } 337 338 static bool spillsCR(const MachineFunction &MF) { 339 const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); 340 return FuncInfo->isCRSpilled(); 341 } 342 343 static bool spillsVRSAVE(const MachineFunction &MF) { 344 const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); 345 return FuncInfo->isVRSAVESpilled(); 346 } 347 348 static bool hasSpills(const MachineFunction &MF) { 349 const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); 350 return FuncInfo->hasSpills(); 351 } 352 353 static bool hasNonRISpills(const MachineFunction &MF) { 354 const PPCFunctionInfo *FuncInfo = MF.getInfo<PPCFunctionInfo>(); 355 return FuncInfo->hasNonRISpills(); 356 } 357 358 /// determineFrameLayout - Determine the size of the frame and maximum call 359 /// frame size. 360 unsigned PPCFrameLowering::determineFrameLayout(MachineFunction &MF, 361 bool UpdateMF, 362 bool UseEstimate) const { 363 MachineFrameInfo *MFI = MF.getFrameInfo(); 364 365 // Get the number of bytes to allocate from the FrameInfo 366 unsigned FrameSize = 367 UseEstimate ? MFI->estimateStackSize(MF) : MFI->getStackSize(); 368 369 // Get stack alignments. The frame must be aligned to the greatest of these: 370 unsigned TargetAlign = getStackAlignment(); // alignment required per the ABI 371 unsigned MaxAlign = MFI->getMaxAlignment(); // algmt required by data in frame 372 unsigned AlignMask = std::max(MaxAlign, TargetAlign) - 1; 373 374 const PPCRegisterInfo *RegInfo = 375 static_cast<const PPCRegisterInfo *>(Subtarget.getRegisterInfo()); 376 377 // If we are a leaf function, and use up to 224 bytes of stack space, 378 // don't have a frame pointer, calls, or dynamic alloca then we do not need 379 // to adjust the stack pointer (we fit in the Red Zone). 380 // The 32-bit SVR4 ABI has no Red Zone. However, it can still generate 381 // stackless code if all local vars are reg-allocated. 382 bool DisableRedZone = MF.getFunction()->getAttributes(). 383 hasAttribute(AttributeSet::FunctionIndex, Attribute::NoRedZone); 384 if (!DisableRedZone && 385 (Subtarget.isPPC64() || // 32-bit SVR4, no stack- 386 !Subtarget.isSVR4ABI() || // allocated locals. 387 FrameSize == 0) && 388 FrameSize <= 224 && // Fits in red zone. 389 !MFI->hasVarSizedObjects() && // No dynamic alloca. 390 !MFI->adjustsStack() && // No calls. 391 !RegInfo->hasBasePointer(MF)) { // No special alignment. 392 // No need for frame 393 if (UpdateMF) 394 MFI->setStackSize(0); 395 return 0; 396 } 397 398 // Get the maximum call frame size of all the calls. 399 unsigned maxCallFrameSize = MFI->getMaxCallFrameSize(); 400 401 // Maximum call frame needs to be at least big enough for linkage area. 402 unsigned minCallFrameSize = getLinkageSize(Subtarget.isPPC64(), 403 Subtarget.isDarwinABI(), 404 Subtarget.isELFv2ABI()); 405 maxCallFrameSize = std::max(maxCallFrameSize, minCallFrameSize); 406 407 // If we have dynamic alloca then maxCallFrameSize needs to be aligned so 408 // that allocations will be aligned. 409 if (MFI->hasVarSizedObjects()) 410 maxCallFrameSize = (maxCallFrameSize + AlignMask) & ~AlignMask; 411 412 // Update maximum call frame size. 413 if (UpdateMF) 414 MFI->setMaxCallFrameSize(maxCallFrameSize); 415 416 // Include call frame size in total. 417 FrameSize += maxCallFrameSize; 418 419 // Make sure the frame is aligned. 420 FrameSize = (FrameSize + AlignMask) & ~AlignMask; 421 422 // Update frame info. 423 if (UpdateMF) 424 MFI->setStackSize(FrameSize); 425 426 return FrameSize; 427 } 428 429 // hasFP - Return true if the specified function actually has a dedicated frame 430 // pointer register. 431 bool PPCFrameLowering::hasFP(const MachineFunction &MF) const { 432 const MachineFrameInfo *MFI = MF.getFrameInfo(); 433 // FIXME: This is pretty much broken by design: hasFP() might be called really 434 // early, before the stack layout was calculated and thus hasFP() might return 435 // true or false here depending on the time of call. 436 return (MFI->getStackSize()) && needsFP(MF); 437 } 438 439 // needsFP - Return true if the specified function should have a dedicated frame 440 // pointer register. This is true if the function has variable sized allocas or 441 // if frame pointer elimination is disabled. 442 bool PPCFrameLowering::needsFP(const MachineFunction &MF) const { 443 const MachineFrameInfo *MFI = MF.getFrameInfo(); 444 445 // Naked functions have no stack frame pushed, so we don't have a frame 446 // pointer. 447 if (MF.getFunction()->getAttributes().hasAttribute( 448 AttributeSet::FunctionIndex, Attribute::Naked)) 449 return false; 450 451 return MF.getTarget().Options.DisableFramePointerElim(MF) || 452 MFI->hasVarSizedObjects() || 453 MFI->hasStackMap() || MFI->hasPatchPoint() || 454 (MF.getTarget().Options.GuaranteedTailCallOpt && 455 MF.getInfo<PPCFunctionInfo>()->hasFastCall()); 456 } 457 458 void PPCFrameLowering::replaceFPWithRealFP(MachineFunction &MF) const { 459 bool is31 = needsFP(MF); 460 unsigned FPReg = is31 ? PPC::R31 : PPC::R1; 461 unsigned FP8Reg = is31 ? PPC::X31 : PPC::X1; 462 463 const PPCRegisterInfo *RegInfo = 464 static_cast<const PPCRegisterInfo *>(Subtarget.getRegisterInfo()); 465 bool HasBP = RegInfo->hasBasePointer(MF); 466 unsigned BPReg = HasBP ? (unsigned) RegInfo->getBaseRegister(MF) : FPReg; 467 unsigned BP8Reg = HasBP ? (unsigned) PPC::X30 : FPReg; 468 469 for (MachineFunction::iterator BI = MF.begin(), BE = MF.end(); 470 BI != BE; ++BI) 471 for (MachineBasicBlock::iterator MBBI = BI->end(); MBBI != BI->begin(); ) { 472 --MBBI; 473 for (unsigned I = 0, E = MBBI->getNumOperands(); I != E; ++I) { 474 MachineOperand &MO = MBBI->getOperand(I); 475 if (!MO.isReg()) 476 continue; 477 478 switch (MO.getReg()) { 479 case PPC::FP: 480 MO.setReg(FPReg); 481 break; 482 case PPC::FP8: 483 MO.setReg(FP8Reg); 484 break; 485 case PPC::BP: 486 MO.setReg(BPReg); 487 break; 488 case PPC::BP8: 489 MO.setReg(BP8Reg); 490 break; 491 492 } 493 } 494 } 495 } 496 497 void PPCFrameLowering::emitPrologue(MachineFunction &MF) const { 498 MachineBasicBlock &MBB = MF.front(); // Prolog goes in entry BB 499 MachineBasicBlock::iterator MBBI = MBB.begin(); 500 MachineFrameInfo *MFI = MF.getFrameInfo(); 501 const PPCInstrInfo &TII = 502 *static_cast<const PPCInstrInfo *>(Subtarget.getInstrInfo()); 503 const PPCRegisterInfo *RegInfo = 504 static_cast<const PPCRegisterInfo *>(Subtarget.getRegisterInfo()); 505 506 MachineModuleInfo &MMI = MF.getMMI(); 507 const MCRegisterInfo *MRI = MMI.getContext().getRegisterInfo(); 508 DebugLoc dl; 509 bool needsCFI = MMI.hasDebugInfo() || 510 MF.getFunction()->needsUnwindTableEntry(); 511 bool isPIC = MF.getTarget().getRelocationModel() == Reloc::PIC_; 512 513 // Get processor type. 514 bool isPPC64 = Subtarget.isPPC64(); 515 // Get the ABI. 516 bool isDarwinABI = Subtarget.isDarwinABI(); 517 bool isSVR4ABI = Subtarget.isSVR4ABI(); 518 bool isELFv2ABI = Subtarget.isELFv2ABI(); 519 assert((isDarwinABI || isSVR4ABI) && 520 "Currently only Darwin and SVR4 ABIs are supported for PowerPC."); 521 522 // Scan the prolog, looking for an UPDATE_VRSAVE instruction. If we find it, 523 // process it. 524 if (!isSVR4ABI) 525 for (unsigned i = 0; MBBI != MBB.end(); ++i, ++MBBI) { 526 if (MBBI->getOpcode() == PPC::UPDATE_VRSAVE) { 527 HandleVRSaveUpdate(MBBI, TII); 528 break; 529 } 530 } 531 532 // Move MBBI back to the beginning of the function. 533 MBBI = MBB.begin(); 534 535 // Work out frame sizes. 536 unsigned FrameSize = determineFrameLayout(MF); 537 int NegFrameSize = -FrameSize; 538 if (!isInt<32>(NegFrameSize)) 539 llvm_unreachable("Unhandled stack size!"); 540 541 if (MFI->isFrameAddressTaken()) 542 replaceFPWithRealFP(MF); 543 544 // Check if the link register (LR) must be saved. 545 PPCFunctionInfo *FI = MF.getInfo<PPCFunctionInfo>(); 546 bool MustSaveLR = FI->mustSaveLR(); 547 const SmallVectorImpl<unsigned> &MustSaveCRs = FI->getMustSaveCRs(); 548 // Do we have a frame pointer and/or base pointer for this function? 549 bool HasFP = hasFP(MF); 550 bool HasBP = RegInfo->hasBasePointer(MF); 551 552 unsigned SPReg = isPPC64 ? PPC::X1 : PPC::R1; 553 unsigned BPReg = RegInfo->getBaseRegister(MF); 554 unsigned FPReg = isPPC64 ? PPC::X31 : PPC::R31; 555 unsigned LRReg = isPPC64 ? PPC::LR8 : PPC::LR; 556 unsigned ScratchReg = isPPC64 ? PPC::X0 : PPC::R0; 557 unsigned TempReg = isPPC64 ? PPC::X12 : PPC::R12; // another scratch reg 558 // ...(R12/X12 is volatile in both Darwin & SVR4, & can't be a function arg.) 559 const MCInstrDesc& MFLRInst = TII.get(isPPC64 ? PPC::MFLR8 560 : PPC::MFLR ); 561 const MCInstrDesc& StoreInst = TII.get(isPPC64 ? PPC::STD 562 : PPC::STW ); 563 const MCInstrDesc& StoreUpdtInst = TII.get(isPPC64 ? PPC::STDU 564 : PPC::STWU ); 565 const MCInstrDesc& StoreUpdtIdxInst = TII.get(isPPC64 ? PPC::STDUX 566 : PPC::STWUX); 567 const MCInstrDesc& LoadImmShiftedInst = TII.get(isPPC64 ? PPC::LIS8 568 : PPC::LIS ); 569 const MCInstrDesc& OrImmInst = TII.get(isPPC64 ? PPC::ORI8 570 : PPC::ORI ); 571 const MCInstrDesc& OrInst = TII.get(isPPC64 ? PPC::OR8 572 : PPC::OR ); 573 const MCInstrDesc& SubtractCarryingInst = TII.get(isPPC64 ? PPC::SUBFC8 574 : PPC::SUBFC); 575 const MCInstrDesc& SubtractImmCarryingInst = TII.get(isPPC64 ? PPC::SUBFIC8 576 : PPC::SUBFIC); 577 578 // Regarding this assert: Even though LR is saved in the caller's frame (i.e., 579 // LROffset is positive), that slot is callee-owned. Because PPC32 SVR4 has no 580 // Red Zone, an asynchronous event (a form of "callee") could claim a frame & 581 // overwrite it, so PPC32 SVR4 must claim at least a minimal frame to save LR. 582 assert((isPPC64 || !isSVR4ABI || !(!FrameSize && (MustSaveLR || HasFP))) && 583 "FrameSize must be >0 to save/restore the FP or LR for 32-bit SVR4."); 584 585 int LROffset = PPCFrameLowering::getReturnSaveOffset(isPPC64, isDarwinABI); 586 587 int FPOffset = 0; 588 if (HasFP) { 589 if (isSVR4ABI) { 590 MachineFrameInfo *FFI = MF.getFrameInfo(); 591 int FPIndex = FI->getFramePointerSaveIndex(); 592 assert(FPIndex && "No Frame Pointer Save Slot!"); 593 FPOffset = FFI->getObjectOffset(FPIndex); 594 } else { 595 FPOffset = 596 PPCFrameLowering::getFramePointerSaveOffset(isPPC64, isDarwinABI); 597 } 598 } 599 600 int BPOffset = 0; 601 if (HasBP) { 602 if (isSVR4ABI) { 603 MachineFrameInfo *FFI = MF.getFrameInfo(); 604 int BPIndex = FI->getBasePointerSaveIndex(); 605 assert(BPIndex && "No Base Pointer Save Slot!"); 606 BPOffset = FFI->getObjectOffset(BPIndex); 607 } else { 608 BPOffset = 609 PPCFrameLowering::getBasePointerSaveOffset(isPPC64, 610 isDarwinABI, 611 isPIC); 612 } 613 } 614 615 int PBPOffset = 0; 616 if (FI->usesPICBase()) { 617 MachineFrameInfo *FFI = MF.getFrameInfo(); 618 int PBPIndex = FI->getPICBasePointerSaveIndex(); 619 assert(PBPIndex && "No PIC Base Pointer Save Slot!"); 620 PBPOffset = FFI->getObjectOffset(PBPIndex); 621 } 622 623 // Get stack alignments. 624 unsigned MaxAlign = MFI->getMaxAlignment(); 625 if (HasBP && MaxAlign > 1) 626 assert(isPowerOf2_32(MaxAlign) && isInt<16>(MaxAlign) && 627 "Invalid alignment!"); 628 629 // Frames of 32KB & larger require special handling because they cannot be 630 // indexed into with a simple STDU/STWU/STD/STW immediate offset operand. 631 bool isLargeFrame = !isInt<16>(NegFrameSize); 632 633 if (MustSaveLR) 634 BuildMI(MBB, MBBI, dl, MFLRInst, ScratchReg); 635 636 assert((isPPC64 || MustSaveCRs.empty()) && 637 "Prologue CR saving supported only in 64-bit mode"); 638 639 if (!MustSaveCRs.empty()) { // will only occur for PPC64 640 // FIXME: In the ELFv2 ABI, we are not required to save all CR fields. 641 // If only one or two CR fields are clobbered, it could be more 642 // efficient to use mfocrf to selectively save just those fields. 643 MachineInstrBuilder MIB = 644 BuildMI(MBB, MBBI, dl, TII.get(PPC::MFCR8), TempReg); 645 for (unsigned i = 0, e = MustSaveCRs.size(); i != e; ++i) 646 MIB.addReg(MustSaveCRs[i], RegState::ImplicitKill); 647 } 648 649 if (HasFP) 650 // FIXME: On PPC32 SVR4, we must not spill before claiming the stackframe. 651 BuildMI(MBB, MBBI, dl, StoreInst) 652 .addReg(FPReg) 653 .addImm(FPOffset) 654 .addReg(SPReg); 655 656 if (FI->usesPICBase()) 657 // FIXME: On PPC32 SVR4, we must not spill before claiming the stackframe. 658 BuildMI(MBB, MBBI, dl, StoreInst) 659 .addReg(PPC::R30) 660 .addImm(PBPOffset) 661 .addReg(SPReg); 662 663 if (HasBP) 664 // FIXME: On PPC32 SVR4, we must not spill before claiming the stackframe. 665 BuildMI(MBB, MBBI, dl, StoreInst) 666 .addReg(BPReg) 667 .addImm(BPOffset) 668 .addReg(SPReg); 669 670 if (MustSaveLR) 671 // FIXME: On PPC32 SVR4, we must not spill before claiming the stackframe. 672 BuildMI(MBB, MBBI, dl, StoreInst) 673 .addReg(ScratchReg) 674 .addImm(LROffset) 675 .addReg(SPReg); 676 677 if (!MustSaveCRs.empty()) // will only occur for PPC64 678 BuildMI(MBB, MBBI, dl, TII.get(PPC::STW8)) 679 .addReg(TempReg, getKillRegState(true)) 680 .addImm(8) 681 .addReg(SPReg); 682 683 // Skip the rest if this is a leaf function & all spills fit in the Red Zone. 684 if (!FrameSize) return; 685 686 // Adjust stack pointer: r1 += NegFrameSize. 687 // If there is a preferred stack alignment, align R1 now 688 689 if (HasBP) { 690 // Save a copy of r1 as the base pointer. 691 BuildMI(MBB, MBBI, dl, OrInst, BPReg) 692 .addReg(SPReg) 693 .addReg(SPReg); 694 } 695 696 if (HasBP && MaxAlign > 1) { 697 if (isPPC64) 698 BuildMI(MBB, MBBI, dl, TII.get(PPC::RLDICL), ScratchReg) 699 .addReg(SPReg) 700 .addImm(0) 701 .addImm(64 - Log2_32(MaxAlign)); 702 else // PPC32... 703 BuildMI(MBB, MBBI, dl, TII.get(PPC::RLWINM), ScratchReg) 704 .addReg(SPReg) 705 .addImm(0) 706 .addImm(32 - Log2_32(MaxAlign)) 707 .addImm(31); 708 if (!isLargeFrame) { 709 BuildMI(MBB, MBBI, dl, SubtractImmCarryingInst, ScratchReg) 710 .addReg(ScratchReg, RegState::Kill) 711 .addImm(NegFrameSize); 712 } else { 713 BuildMI(MBB, MBBI, dl, LoadImmShiftedInst, TempReg) 714 .addImm(NegFrameSize >> 16); 715 BuildMI(MBB, MBBI, dl, OrImmInst, TempReg) 716 .addReg(TempReg, RegState::Kill) 717 .addImm(NegFrameSize & 0xFFFF); 718 BuildMI(MBB, MBBI, dl, SubtractCarryingInst, ScratchReg) 719 .addReg(ScratchReg, RegState::Kill) 720 .addReg(TempReg, RegState::Kill); 721 } 722 BuildMI(MBB, MBBI, dl, StoreUpdtIdxInst, SPReg) 723 .addReg(SPReg, RegState::Kill) 724 .addReg(SPReg) 725 .addReg(ScratchReg); 726 727 } else if (!isLargeFrame) { 728 BuildMI(MBB, MBBI, dl, StoreUpdtInst, SPReg) 729 .addReg(SPReg) 730 .addImm(NegFrameSize) 731 .addReg(SPReg); 732 733 } else { 734 BuildMI(MBB, MBBI, dl, LoadImmShiftedInst, ScratchReg) 735 .addImm(NegFrameSize >> 16); 736 BuildMI(MBB, MBBI, dl, OrImmInst, ScratchReg) 737 .addReg(ScratchReg, RegState::Kill) 738 .addImm(NegFrameSize & 0xFFFF); 739 BuildMI(MBB, MBBI, dl, StoreUpdtIdxInst, SPReg) 740 .addReg(SPReg, RegState::Kill) 741 .addReg(SPReg) 742 .addReg(ScratchReg); 743 } 744 745 // Add Call Frame Information for the instructions we generated above. 746 if (needsCFI) { 747 unsigned CFIIndex; 748 749 if (HasBP) { 750 // Define CFA in terms of BP. Do this in preference to using FP/SP, 751 // because if the stack needed aligning then CFA won't be at a fixed 752 // offset from FP/SP. 753 unsigned Reg = MRI->getDwarfRegNum(BPReg, true); 754 CFIIndex = MMI.addFrameInst( 755 MCCFIInstruction::createDefCfaRegister(nullptr, Reg)); 756 } else { 757 // Adjust the definition of CFA to account for the change in SP. 758 assert(NegFrameSize); 759 CFIIndex = MMI.addFrameInst( 760 MCCFIInstruction::createDefCfaOffset(nullptr, NegFrameSize)); 761 } 762 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 763 .addCFIIndex(CFIIndex); 764 765 if (HasFP) { 766 // Describe where FP was saved, at a fixed offset from CFA. 767 unsigned Reg = MRI->getDwarfRegNum(FPReg, true); 768 CFIIndex = MMI.addFrameInst( 769 MCCFIInstruction::createOffset(nullptr, Reg, FPOffset)); 770 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 771 .addCFIIndex(CFIIndex); 772 } 773 774 if (FI->usesPICBase()) { 775 // Describe where FP was saved, at a fixed offset from CFA. 776 unsigned Reg = MRI->getDwarfRegNum(PPC::R30, true); 777 CFIIndex = MMI.addFrameInst( 778 MCCFIInstruction::createOffset(nullptr, Reg, PBPOffset)); 779 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 780 .addCFIIndex(CFIIndex); 781 } 782 783 if (HasBP) { 784 // Describe where BP was saved, at a fixed offset from CFA. 785 unsigned Reg = MRI->getDwarfRegNum(BPReg, true); 786 CFIIndex = MMI.addFrameInst( 787 MCCFIInstruction::createOffset(nullptr, Reg, BPOffset)); 788 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 789 .addCFIIndex(CFIIndex); 790 } 791 792 if (MustSaveLR) { 793 // Describe where LR was saved, at a fixed offset from CFA. 794 unsigned Reg = MRI->getDwarfRegNum(LRReg, true); 795 CFIIndex = MMI.addFrameInst( 796 MCCFIInstruction::createOffset(nullptr, Reg, LROffset)); 797 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 798 .addCFIIndex(CFIIndex); 799 } 800 } 801 802 // If there is a frame pointer, copy R1 into R31 803 if (HasFP) { 804 BuildMI(MBB, MBBI, dl, OrInst, FPReg) 805 .addReg(SPReg) 806 .addReg(SPReg); 807 808 if (!HasBP && needsCFI) { 809 // Change the definition of CFA from SP+offset to FP+offset, because SP 810 // will change at every alloca. 811 unsigned Reg = MRI->getDwarfRegNum(FPReg, true); 812 unsigned CFIIndex = MMI.addFrameInst( 813 MCCFIInstruction::createDefCfaRegister(nullptr, Reg)); 814 815 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 816 .addCFIIndex(CFIIndex); 817 } 818 } 819 820 if (needsCFI) { 821 // Describe where callee saved registers were saved, at fixed offsets from 822 // CFA. 823 const std::vector<CalleeSavedInfo> &CSI = MFI->getCalleeSavedInfo(); 824 for (unsigned I = 0, E = CSI.size(); I != E; ++I) { 825 unsigned Reg = CSI[I].getReg(); 826 if (Reg == PPC::LR || Reg == PPC::LR8 || Reg == PPC::RM) continue; 827 828 // This is a bit of a hack: CR2LT, CR2GT, CR2EQ and CR2UN are just 829 // subregisters of CR2. We just need to emit a move of CR2. 830 if (PPC::CRBITRCRegClass.contains(Reg)) 831 continue; 832 833 // For SVR4, don't emit a move for the CR spill slot if we haven't 834 // spilled CRs. 835 if (isSVR4ABI && (PPC::CR2 <= Reg && Reg <= PPC::CR4) 836 && MustSaveCRs.empty()) 837 continue; 838 839 // For 64-bit SVR4 when we have spilled CRs, the spill location 840 // is SP+8, not a frame-relative slot. 841 if (isSVR4ABI && isPPC64 && (PPC::CR2 <= Reg && Reg <= PPC::CR4)) { 842 // In the ELFv1 ABI, only CR2 is noted in CFI and stands in for 843 // the whole CR word. In the ELFv2 ABI, every CR that was 844 // actually saved gets its own CFI record. 845 unsigned CRReg = isELFv2ABI? Reg : (unsigned) PPC::CR2; 846 unsigned CFIIndex = MMI.addFrameInst(MCCFIInstruction::createOffset( 847 nullptr, MRI->getDwarfRegNum(CRReg, true), 8)); 848 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 849 .addCFIIndex(CFIIndex); 850 continue; 851 } 852 853 int Offset = MFI->getObjectOffset(CSI[I].getFrameIdx()); 854 unsigned CFIIndex = MMI.addFrameInst(MCCFIInstruction::createOffset( 855 nullptr, MRI->getDwarfRegNum(Reg, true), Offset)); 856 BuildMI(MBB, MBBI, dl, TII.get(TargetOpcode::CFI_INSTRUCTION)) 857 .addCFIIndex(CFIIndex); 858 } 859 } 860 } 861 862 void PPCFrameLowering::emitEpilogue(MachineFunction &MF, 863 MachineBasicBlock &MBB) const { 864 MachineBasicBlock::iterator MBBI = MBB.getLastNonDebugInstr(); 865 assert(MBBI != MBB.end() && "Returning block has no terminator"); 866 const PPCInstrInfo &TII = 867 *static_cast<const PPCInstrInfo *>(Subtarget.getInstrInfo()); 868 const PPCRegisterInfo *RegInfo = 869 static_cast<const PPCRegisterInfo *>(Subtarget.getRegisterInfo()); 870 871 unsigned RetOpcode = MBBI->getOpcode(); 872 DebugLoc dl; 873 874 assert((RetOpcode == PPC::BLR || 875 RetOpcode == PPC::BLR8 || 876 RetOpcode == PPC::TCRETURNri || 877 RetOpcode == PPC::TCRETURNdi || 878 RetOpcode == PPC::TCRETURNai || 879 RetOpcode == PPC::TCRETURNri8 || 880 RetOpcode == PPC::TCRETURNdi8 || 881 RetOpcode == PPC::TCRETURNai8) && 882 "Can only insert epilog into returning blocks"); 883 884 // Get alignment info so we know how to restore the SP. 885 const MachineFrameInfo *MFI = MF.getFrameInfo(); 886 887 // Get the number of bytes allocated from the FrameInfo. 888 int FrameSize = MFI->getStackSize(); 889 890 // Get processor type. 891 bool isPPC64 = Subtarget.isPPC64(); 892 // Get the ABI. 893 bool isDarwinABI = Subtarget.isDarwinABI(); 894 bool isSVR4ABI = Subtarget.isSVR4ABI(); 895 bool isPIC = MF.getTarget().getRelocationModel() == Reloc::PIC_; 896 897 // Check if the link register (LR) has been saved. 898 PPCFunctionInfo *FI = MF.getInfo<PPCFunctionInfo>(); 899 bool MustSaveLR = FI->mustSaveLR(); 900 const SmallVectorImpl<unsigned> &MustSaveCRs = FI->getMustSaveCRs(); 901 // Do we have a frame pointer and/or base pointer for this function? 902 bool HasFP = hasFP(MF); 903 bool HasBP = RegInfo->hasBasePointer(MF); 904 905 unsigned SPReg = isPPC64 ? PPC::X1 : PPC::R1; 906 unsigned BPReg = RegInfo->getBaseRegister(MF); 907 unsigned FPReg = isPPC64 ? PPC::X31 : PPC::R31; 908 unsigned ScratchReg = isPPC64 ? PPC::X0 : PPC::R0; 909 unsigned TempReg = isPPC64 ? PPC::X12 : PPC::R12; // another scratch reg 910 const MCInstrDesc& MTLRInst = TII.get( isPPC64 ? PPC::MTLR8 911 : PPC::MTLR ); 912 const MCInstrDesc& LoadInst = TII.get( isPPC64 ? PPC::LD 913 : PPC::LWZ ); 914 const MCInstrDesc& LoadImmShiftedInst = TII.get( isPPC64 ? PPC::LIS8 915 : PPC::LIS ); 916 const MCInstrDesc& OrImmInst = TII.get( isPPC64 ? PPC::ORI8 917 : PPC::ORI ); 918 const MCInstrDesc& AddImmInst = TII.get( isPPC64 ? PPC::ADDI8 919 : PPC::ADDI ); 920 const MCInstrDesc& AddInst = TII.get( isPPC64 ? PPC::ADD8 921 : PPC::ADD4 ); 922 923 int LROffset = PPCFrameLowering::getReturnSaveOffset(isPPC64, isDarwinABI); 924 925 int FPOffset = 0; 926 if (HasFP) { 927 if (isSVR4ABI) { 928 MachineFrameInfo *FFI = MF.getFrameInfo(); 929 int FPIndex = FI->getFramePointerSaveIndex(); 930 assert(FPIndex && "No Frame Pointer Save Slot!"); 931 FPOffset = FFI->getObjectOffset(FPIndex); 932 } else { 933 FPOffset = 934 PPCFrameLowering::getFramePointerSaveOffset(isPPC64, isDarwinABI); 935 } 936 } 937 938 int BPOffset = 0; 939 if (HasBP) { 940 if (isSVR4ABI) { 941 MachineFrameInfo *FFI = MF.getFrameInfo(); 942 int BPIndex = FI->getBasePointerSaveIndex(); 943 assert(BPIndex && "No Base Pointer Save Slot!"); 944 BPOffset = FFI->getObjectOffset(BPIndex); 945 } else { 946 BPOffset = 947 PPCFrameLowering::getBasePointerSaveOffset(isPPC64, 948 isDarwinABI, 949 isPIC); 950 } 951 } 952 953 int PBPOffset = 0; 954 if (FI->usesPICBase()) { 955 MachineFrameInfo *FFI = MF.getFrameInfo(); 956 int PBPIndex = FI->getPICBasePointerSaveIndex(); 957 assert(PBPIndex && "No PIC Base Pointer Save Slot!"); 958 PBPOffset = FFI->getObjectOffset(PBPIndex); 959 } 960 961 bool UsesTCRet = RetOpcode == PPC::TCRETURNri || 962 RetOpcode == PPC::TCRETURNdi || 963 RetOpcode == PPC::TCRETURNai || 964 RetOpcode == PPC::TCRETURNri8 || 965 RetOpcode == PPC::TCRETURNdi8 || 966 RetOpcode == PPC::TCRETURNai8; 967 968 if (UsesTCRet) { 969 int MaxTCRetDelta = FI->getTailCallSPDelta(); 970 MachineOperand &StackAdjust = MBBI->getOperand(1); 971 assert(StackAdjust.isImm() && "Expecting immediate value."); 972 // Adjust stack pointer. 973 int StackAdj = StackAdjust.getImm(); 974 int Delta = StackAdj - MaxTCRetDelta; 975 assert((Delta >= 0) && "Delta must be positive"); 976 if (MaxTCRetDelta>0) 977 FrameSize += (StackAdj +Delta); 978 else 979 FrameSize += StackAdj; 980 } 981 982 // Frames of 32KB & larger require special handling because they cannot be 983 // indexed into with a simple LD/LWZ immediate offset operand. 984 bool isLargeFrame = !isInt<16>(FrameSize); 985 986 if (FrameSize) { 987 // In the prologue, the loaded (or persistent) stack pointer value is offset 988 // by the STDU/STDUX/STWU/STWUX instruction. Add this offset back now. 989 990 // If this function contained a fastcc call and GuaranteedTailCallOpt is 991 // enabled (=> hasFastCall()==true) the fastcc call might contain a tail 992 // call which invalidates the stack pointer value in SP(0). So we use the 993 // value of R31 in this case. 994 if (FI->hasFastCall()) { 995 assert(HasFP && "Expecting a valid frame pointer."); 996 if (!isLargeFrame) { 997 BuildMI(MBB, MBBI, dl, AddImmInst, SPReg) 998 .addReg(FPReg).addImm(FrameSize); 999 } else { 1000 BuildMI(MBB, MBBI, dl, LoadImmShiftedInst, ScratchReg) 1001 .addImm(FrameSize >> 16); 1002 BuildMI(MBB, MBBI, dl, OrImmInst, ScratchReg) 1003 .addReg(ScratchReg, RegState::Kill) 1004 .addImm(FrameSize & 0xFFFF); 1005 BuildMI(MBB, MBBI, dl, AddInst) 1006 .addReg(SPReg) 1007 .addReg(FPReg) 1008 .addReg(ScratchReg); 1009 } 1010 } else if (!isLargeFrame && !HasBP && !MFI->hasVarSizedObjects()) { 1011 BuildMI(MBB, MBBI, dl, AddImmInst, SPReg) 1012 .addReg(SPReg) 1013 .addImm(FrameSize); 1014 } else { 1015 BuildMI(MBB, MBBI, dl, LoadInst, SPReg) 1016 .addImm(0) 1017 .addReg(SPReg); 1018 } 1019 1020 } 1021 1022 if (MustSaveLR) 1023 BuildMI(MBB, MBBI, dl, LoadInst, ScratchReg) 1024 .addImm(LROffset) 1025 .addReg(SPReg); 1026 1027 assert((isPPC64 || MustSaveCRs.empty()) && 1028 "Epilogue CR restoring supported only in 64-bit mode"); 1029 1030 if (!MustSaveCRs.empty()) // will only occur for PPC64 1031 BuildMI(MBB, MBBI, dl, TII.get(PPC::LWZ8), TempReg) 1032 .addImm(8) 1033 .addReg(SPReg); 1034 1035 if (HasFP) 1036 BuildMI(MBB, MBBI, dl, LoadInst, FPReg) 1037 .addImm(FPOffset) 1038 .addReg(SPReg); 1039 1040 if (FI->usesPICBase()) 1041 // FIXME: On PPC32 SVR4, we must not spill before claiming the stackframe. 1042 BuildMI(MBB, MBBI, dl, LoadInst) 1043 .addReg(PPC::R30) 1044 .addImm(PBPOffset) 1045 .addReg(SPReg); 1046 1047 if (HasBP) 1048 BuildMI(MBB, MBBI, dl, LoadInst, BPReg) 1049 .addImm(BPOffset) 1050 .addReg(SPReg); 1051 1052 if (!MustSaveCRs.empty()) // will only occur for PPC64 1053 for (unsigned i = 0, e = MustSaveCRs.size(); i != e; ++i) 1054 BuildMI(MBB, MBBI, dl, TII.get(PPC::MTOCRF8), MustSaveCRs[i]) 1055 .addReg(TempReg, getKillRegState(i == e-1)); 1056 1057 if (MustSaveLR) 1058 BuildMI(MBB, MBBI, dl, MTLRInst).addReg(ScratchReg); 1059 1060 // Callee pop calling convention. Pop parameter/linkage area. Used for tail 1061 // call optimization 1062 if (MF.getTarget().Options.GuaranteedTailCallOpt && 1063 (RetOpcode == PPC::BLR || RetOpcode == PPC::BLR8) && 1064 MF.getFunction()->getCallingConv() == CallingConv::Fast) { 1065 PPCFunctionInfo *FI = MF.getInfo<PPCFunctionInfo>(); 1066 unsigned CallerAllocatedAmt = FI->getMinReservedArea(); 1067 1068 if (CallerAllocatedAmt && isInt<16>(CallerAllocatedAmt)) { 1069 BuildMI(MBB, MBBI, dl, AddImmInst, SPReg) 1070 .addReg(SPReg).addImm(CallerAllocatedAmt); 1071 } else { 1072 BuildMI(MBB, MBBI, dl, LoadImmShiftedInst, ScratchReg) 1073 .addImm(CallerAllocatedAmt >> 16); 1074 BuildMI(MBB, MBBI, dl, OrImmInst, ScratchReg) 1075 .addReg(ScratchReg, RegState::Kill) 1076 .addImm(CallerAllocatedAmt & 0xFFFF); 1077 BuildMI(MBB, MBBI, dl, AddInst) 1078 .addReg(SPReg) 1079 .addReg(FPReg) 1080 .addReg(ScratchReg); 1081 } 1082 } else if (RetOpcode == PPC::TCRETURNdi) { 1083 MBBI = MBB.getLastNonDebugInstr(); 1084 MachineOperand &JumpTarget = MBBI->getOperand(0); 1085 BuildMI(MBB, MBBI, dl, TII.get(PPC::TAILB)). 1086 addGlobalAddress(JumpTarget.getGlobal(), JumpTarget.getOffset()); 1087 } else if (RetOpcode == PPC::TCRETURNri) { 1088 MBBI = MBB.getLastNonDebugInstr(); 1089 assert(MBBI->getOperand(0).isReg() && "Expecting register operand."); 1090 BuildMI(MBB, MBBI, dl, TII.get(PPC::TAILBCTR)); 1091 } else if (RetOpcode == PPC::TCRETURNai) { 1092 MBBI = MBB.getLastNonDebugInstr(); 1093 MachineOperand &JumpTarget = MBBI->getOperand(0); 1094 BuildMI(MBB, MBBI, dl, TII.get(PPC::TAILBA)).addImm(JumpTarget.getImm()); 1095 } else if (RetOpcode == PPC::TCRETURNdi8) { 1096 MBBI = MBB.getLastNonDebugInstr(); 1097 MachineOperand &JumpTarget = MBBI->getOperand(0); 1098 BuildMI(MBB, MBBI, dl, TII.get(PPC::TAILB8)). 1099 addGlobalAddress(JumpTarget.getGlobal(), JumpTarget.getOffset()); 1100 } else if (RetOpcode == PPC::TCRETURNri8) { 1101 MBBI = MBB.getLastNonDebugInstr(); 1102 assert(MBBI->getOperand(0).isReg() && "Expecting register operand."); 1103 BuildMI(MBB, MBBI, dl, TII.get(PPC::TAILBCTR8)); 1104 } else if (RetOpcode == PPC::TCRETURNai8) { 1105 MBBI = MBB.getLastNonDebugInstr(); 1106 MachineOperand &JumpTarget = MBBI->getOperand(0); 1107 BuildMI(MBB, MBBI, dl, TII.get(PPC::TAILBA8)).addImm(JumpTarget.getImm()); 1108 } 1109 } 1110 1111 /// MustSaveLR - Return true if this function requires that we save the LR 1112 /// register onto the stack in the prolog and restore it in the epilog of the 1113 /// function. 1114 static bool MustSaveLR(const MachineFunction &MF, unsigned LR) { 1115 const PPCFunctionInfo *MFI = MF.getInfo<PPCFunctionInfo>(); 1116 1117 // We need a save/restore of LR if there is any def of LR (which is 1118 // defined by calls, including the PIC setup sequence), or if there is 1119 // some use of the LR stack slot (e.g. for builtin_return_address). 1120 // (LR comes in 32 and 64 bit versions.) 1121 MachineRegisterInfo::def_iterator RI = MF.getRegInfo().def_begin(LR); 1122 return RI !=MF.getRegInfo().def_end() || MFI->isLRStoreRequired(); 1123 } 1124 1125 void 1126 PPCFrameLowering::processFunctionBeforeCalleeSavedScan(MachineFunction &MF, 1127 RegScavenger *) const { 1128 const PPCRegisterInfo *RegInfo = 1129 static_cast<const PPCRegisterInfo *>(Subtarget.getRegisterInfo()); 1130 1131 // Save and clear the LR state. 1132 PPCFunctionInfo *FI = MF.getInfo<PPCFunctionInfo>(); 1133 unsigned LR = RegInfo->getRARegister(); 1134 FI->setMustSaveLR(MustSaveLR(MF, LR)); 1135 MachineRegisterInfo &MRI = MF.getRegInfo(); 1136 MRI.setPhysRegUnused(LR); 1137 1138 // Save R31 if necessary 1139 int FPSI = FI->getFramePointerSaveIndex(); 1140 bool isPPC64 = Subtarget.isPPC64(); 1141 bool isDarwinABI = Subtarget.isDarwinABI(); 1142 bool isPIC = MF.getTarget().getRelocationModel() == Reloc::PIC_; 1143 MachineFrameInfo *MFI = MF.getFrameInfo(); 1144 1145 // If the frame pointer save index hasn't been defined yet. 1146 if (!FPSI && needsFP(MF)) { 1147 // Find out what the fix offset of the frame pointer save area. 1148 int FPOffset = getFramePointerSaveOffset(isPPC64, isDarwinABI); 1149 // Allocate the frame index for frame pointer save area. 1150 FPSI = MFI->CreateFixedObject(isPPC64? 8 : 4, FPOffset, true); 1151 // Save the result. 1152 FI->setFramePointerSaveIndex(FPSI); 1153 } 1154 1155 int BPSI = FI->getBasePointerSaveIndex(); 1156 if (!BPSI && RegInfo->hasBasePointer(MF)) { 1157 int BPOffset = getBasePointerSaveOffset(isPPC64, isDarwinABI, isPIC); 1158 // Allocate the frame index for the base pointer save area. 1159 BPSI = MFI->CreateFixedObject(isPPC64? 8 : 4, BPOffset, true); 1160 // Save the result. 1161 FI->setBasePointerSaveIndex(BPSI); 1162 } 1163 1164 // Reserve stack space for the PIC Base register (R30). 1165 // Only used in SVR4 32-bit. 1166 if (FI->usesPICBase()) { 1167 int PBPSI = FI->getPICBasePointerSaveIndex(); 1168 PBPSI = MFI->CreateFixedObject(4, -8, true); 1169 FI->setPICBasePointerSaveIndex(PBPSI); 1170 } 1171 1172 // Reserve stack space to move the linkage area to in case of a tail call. 1173 int TCSPDelta = 0; 1174 if (MF.getTarget().Options.GuaranteedTailCallOpt && 1175 (TCSPDelta = FI->getTailCallSPDelta()) < 0) { 1176 MFI->CreateFixedObject(-1 * TCSPDelta, TCSPDelta, true); 1177 } 1178 1179 // For 32-bit SVR4, allocate the nonvolatile CR spill slot iff the 1180 // function uses CR 2, 3, or 4. 1181 if (!isPPC64 && !isDarwinABI && 1182 (MRI.isPhysRegUsed(PPC::CR2) || 1183 MRI.isPhysRegUsed(PPC::CR3) || 1184 MRI.isPhysRegUsed(PPC::CR4))) { 1185 int FrameIdx = MFI->CreateFixedObject((uint64_t)4, (int64_t)-4, true); 1186 FI->setCRSpillFrameIndex(FrameIdx); 1187 } 1188 } 1189 1190 void PPCFrameLowering::processFunctionBeforeFrameFinalized(MachineFunction &MF, 1191 RegScavenger *RS) const { 1192 // Early exit if not using the SVR4 ABI. 1193 if (!Subtarget.isSVR4ABI()) { 1194 addScavengingSpillSlot(MF, RS); 1195 return; 1196 } 1197 1198 // Get callee saved register information. 1199 MachineFrameInfo *FFI = MF.getFrameInfo(); 1200 const std::vector<CalleeSavedInfo> &CSI = FFI->getCalleeSavedInfo(); 1201 1202 // Early exit if no callee saved registers are modified! 1203 if (CSI.empty() && !needsFP(MF)) { 1204 addScavengingSpillSlot(MF, RS); 1205 return; 1206 } 1207 1208 unsigned MinGPR = PPC::R31; 1209 unsigned MinG8R = PPC::X31; 1210 unsigned MinFPR = PPC::F31; 1211 unsigned MinVR = PPC::V31; 1212 1213 bool HasGPSaveArea = false; 1214 bool HasG8SaveArea = false; 1215 bool HasFPSaveArea = false; 1216 bool HasVRSAVESaveArea = false; 1217 bool HasVRSaveArea = false; 1218 1219 SmallVector<CalleeSavedInfo, 18> GPRegs; 1220 SmallVector<CalleeSavedInfo, 18> G8Regs; 1221 SmallVector<CalleeSavedInfo, 18> FPRegs; 1222 SmallVector<CalleeSavedInfo, 18> VRegs; 1223 1224 for (unsigned i = 0, e = CSI.size(); i != e; ++i) { 1225 unsigned Reg = CSI[i].getReg(); 1226 if (PPC::GPRCRegClass.contains(Reg)) { 1227 HasGPSaveArea = true; 1228 1229 GPRegs.push_back(CSI[i]); 1230 1231 if (Reg < MinGPR) { 1232 MinGPR = Reg; 1233 } 1234 } else if (PPC::G8RCRegClass.contains(Reg)) { 1235 HasG8SaveArea = true; 1236 1237 G8Regs.push_back(CSI[i]); 1238 1239 if (Reg < MinG8R) { 1240 MinG8R = Reg; 1241 } 1242 } else if (PPC::F8RCRegClass.contains(Reg)) { 1243 HasFPSaveArea = true; 1244 1245 FPRegs.push_back(CSI[i]); 1246 1247 if (Reg < MinFPR) { 1248 MinFPR = Reg; 1249 } 1250 } else if (PPC::CRBITRCRegClass.contains(Reg) || 1251 PPC::CRRCRegClass.contains(Reg)) { 1252 ; // do nothing, as we already know whether CRs are spilled 1253 } else if (PPC::VRSAVERCRegClass.contains(Reg)) { 1254 HasVRSAVESaveArea = true; 1255 } else if (PPC::VRRCRegClass.contains(Reg)) { 1256 HasVRSaveArea = true; 1257 1258 VRegs.push_back(CSI[i]); 1259 1260 if (Reg < MinVR) { 1261 MinVR = Reg; 1262 } 1263 } else { 1264 llvm_unreachable("Unknown RegisterClass!"); 1265 } 1266 } 1267 1268 PPCFunctionInfo *PFI = MF.getInfo<PPCFunctionInfo>(); 1269 const TargetRegisterInfo *TRI = Subtarget.getRegisterInfo(); 1270 1271 int64_t LowerBound = 0; 1272 1273 // Take into account stack space reserved for tail calls. 1274 int TCSPDelta = 0; 1275 if (MF.getTarget().Options.GuaranteedTailCallOpt && 1276 (TCSPDelta = PFI->getTailCallSPDelta()) < 0) { 1277 LowerBound = TCSPDelta; 1278 } 1279 1280 // The Floating-point register save area is right below the back chain word 1281 // of the previous stack frame. 1282 if (HasFPSaveArea) { 1283 for (unsigned i = 0, e = FPRegs.size(); i != e; ++i) { 1284 int FI = FPRegs[i].getFrameIdx(); 1285 1286 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1287 } 1288 1289 LowerBound -= (31 - TRI->getEncodingValue(MinFPR) + 1) * 8; 1290 } 1291 1292 // Check whether the frame pointer register is allocated. If so, make sure it 1293 // is spilled to the correct offset. 1294 if (needsFP(MF)) { 1295 HasGPSaveArea = true; 1296 1297 int FI = PFI->getFramePointerSaveIndex(); 1298 assert(FI && "No Frame Pointer Save Slot!"); 1299 1300 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1301 } 1302 1303 if (PFI->usesPICBase()) { 1304 HasGPSaveArea = true; 1305 1306 int FI = PFI->getPICBasePointerSaveIndex(); 1307 assert(FI && "No PIC Base Pointer Save Slot!"); 1308 1309 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1310 } 1311 1312 const PPCRegisterInfo *RegInfo = 1313 static_cast<const PPCRegisterInfo *>(Subtarget.getRegisterInfo()); 1314 if (RegInfo->hasBasePointer(MF)) { 1315 HasGPSaveArea = true; 1316 1317 int FI = PFI->getBasePointerSaveIndex(); 1318 assert(FI && "No Base Pointer Save Slot!"); 1319 1320 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1321 } 1322 1323 // General register save area starts right below the Floating-point 1324 // register save area. 1325 if (HasGPSaveArea || HasG8SaveArea) { 1326 // Move general register save area spill slots down, taking into account 1327 // the size of the Floating-point register save area. 1328 for (unsigned i = 0, e = GPRegs.size(); i != e; ++i) { 1329 int FI = GPRegs[i].getFrameIdx(); 1330 1331 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1332 } 1333 1334 // Move general register save area spill slots down, taking into account 1335 // the size of the Floating-point register save area. 1336 for (unsigned i = 0, e = G8Regs.size(); i != e; ++i) { 1337 int FI = G8Regs[i].getFrameIdx(); 1338 1339 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1340 } 1341 1342 unsigned MinReg = 1343 std::min<unsigned>(TRI->getEncodingValue(MinGPR), 1344 TRI->getEncodingValue(MinG8R)); 1345 1346 if (Subtarget.isPPC64()) { 1347 LowerBound -= (31 - MinReg + 1) * 8; 1348 } else { 1349 LowerBound -= (31 - MinReg + 1) * 4; 1350 } 1351 } 1352 1353 // For 32-bit only, the CR save area is below the general register 1354 // save area. For 64-bit SVR4, the CR save area is addressed relative 1355 // to the stack pointer and hence does not need an adjustment here. 1356 // Only CR2 (the first nonvolatile spilled) has an associated frame 1357 // index so that we have a single uniform save area. 1358 if (spillsCR(MF) && !(Subtarget.isPPC64() && Subtarget.isSVR4ABI())) { 1359 // Adjust the frame index of the CR spill slot. 1360 for (unsigned i = 0, e = CSI.size(); i != e; ++i) { 1361 unsigned Reg = CSI[i].getReg(); 1362 1363 if ((Subtarget.isSVR4ABI() && Reg == PPC::CR2) 1364 // Leave Darwin logic as-is. 1365 || (!Subtarget.isSVR4ABI() && 1366 (PPC::CRBITRCRegClass.contains(Reg) || 1367 PPC::CRRCRegClass.contains(Reg)))) { 1368 int FI = CSI[i].getFrameIdx(); 1369 1370 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1371 } 1372 } 1373 1374 LowerBound -= 4; // The CR save area is always 4 bytes long. 1375 } 1376 1377 if (HasVRSAVESaveArea) { 1378 // FIXME SVR4: Is it actually possible to have multiple elements in CSI 1379 // which have the VRSAVE register class? 1380 // Adjust the frame index of the VRSAVE spill slot. 1381 for (unsigned i = 0, e = CSI.size(); i != e; ++i) { 1382 unsigned Reg = CSI[i].getReg(); 1383 1384 if (PPC::VRSAVERCRegClass.contains(Reg)) { 1385 int FI = CSI[i].getFrameIdx(); 1386 1387 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1388 } 1389 } 1390 1391 LowerBound -= 4; // The VRSAVE save area is always 4 bytes long. 1392 } 1393 1394 if (HasVRSaveArea) { 1395 // Insert alignment padding, we need 16-byte alignment. 1396 LowerBound = (LowerBound - 15) & ~(15); 1397 1398 for (unsigned i = 0, e = VRegs.size(); i != e; ++i) { 1399 int FI = VRegs[i].getFrameIdx(); 1400 1401 FFI->setObjectOffset(FI, LowerBound + FFI->getObjectOffset(FI)); 1402 } 1403 } 1404 1405 addScavengingSpillSlot(MF, RS); 1406 } 1407 1408 void 1409 PPCFrameLowering::addScavengingSpillSlot(MachineFunction &MF, 1410 RegScavenger *RS) const { 1411 // Reserve a slot closest to SP or frame pointer if we have a dynalloc or 1412 // a large stack, which will require scavenging a register to materialize a 1413 // large offset. 1414 1415 // We need to have a scavenger spill slot for spills if the frame size is 1416 // large. In case there is no free register for large-offset addressing, 1417 // this slot is used for the necessary emergency spill. Also, we need the 1418 // slot for dynamic stack allocations. 1419 1420 // The scavenger might be invoked if the frame offset does not fit into 1421 // the 16-bit immediate. We don't know the complete frame size here 1422 // because we've not yet computed callee-saved register spills or the 1423 // needed alignment padding. 1424 unsigned StackSize = determineFrameLayout(MF, false, true); 1425 MachineFrameInfo *MFI = MF.getFrameInfo(); 1426 if (MFI->hasVarSizedObjects() || spillsCR(MF) || spillsVRSAVE(MF) || 1427 hasNonRISpills(MF) || (hasSpills(MF) && !isInt<16>(StackSize))) { 1428 const TargetRegisterClass *GPRC = &PPC::GPRCRegClass; 1429 const TargetRegisterClass *G8RC = &PPC::G8RCRegClass; 1430 const TargetRegisterClass *RC = Subtarget.isPPC64() ? G8RC : GPRC; 1431 RS->addScavengingFrameIndex(MFI->CreateStackObject(RC->getSize(), 1432 RC->getAlignment(), 1433 false)); 1434 1435 // Might we have over-aligned allocas? 1436 bool HasAlVars = MFI->hasVarSizedObjects() && 1437 MFI->getMaxAlignment() > getStackAlignment(); 1438 1439 // These kinds of spills might need two registers. 1440 if (spillsCR(MF) || spillsVRSAVE(MF) || HasAlVars) 1441 RS->addScavengingFrameIndex(MFI->CreateStackObject(RC->getSize(), 1442 RC->getAlignment(), 1443 false)); 1444 1445 } 1446 } 1447 1448 bool 1449 PPCFrameLowering::spillCalleeSavedRegisters(MachineBasicBlock &MBB, 1450 MachineBasicBlock::iterator MI, 1451 const std::vector<CalleeSavedInfo> &CSI, 1452 const TargetRegisterInfo *TRI) const { 1453 1454 // Currently, this function only handles SVR4 32- and 64-bit ABIs. 1455 // Return false otherwise to maintain pre-existing behavior. 1456 if (!Subtarget.isSVR4ABI()) 1457 return false; 1458 1459 MachineFunction *MF = MBB.getParent(); 1460 const PPCInstrInfo &TII = 1461 *static_cast<const PPCInstrInfo *>(Subtarget.getInstrInfo()); 1462 DebugLoc DL; 1463 bool CRSpilled = false; 1464 MachineInstrBuilder CRMIB; 1465 1466 for (unsigned i = 0, e = CSI.size(); i != e; ++i) { 1467 unsigned Reg = CSI[i].getReg(); 1468 // Only Darwin actually uses the VRSAVE register, but it can still appear 1469 // here if, for example, @llvm.eh.unwind.init() is used. If we're not on 1470 // Darwin, ignore it. 1471 if (Reg == PPC::VRSAVE && !Subtarget.isDarwinABI()) 1472 continue; 1473 1474 // CR2 through CR4 are the nonvolatile CR fields. 1475 bool IsCRField = PPC::CR2 <= Reg && Reg <= PPC::CR4; 1476 1477 // Add the callee-saved register as live-in; it's killed at the spill. 1478 MBB.addLiveIn(Reg); 1479 1480 if (CRSpilled && IsCRField) { 1481 CRMIB.addReg(Reg, RegState::ImplicitKill); 1482 continue; 1483 } 1484 1485 // Insert the spill to the stack frame. 1486 if (IsCRField) { 1487 PPCFunctionInfo *FuncInfo = MF->getInfo<PPCFunctionInfo>(); 1488 if (Subtarget.isPPC64()) { 1489 // The actual spill will happen at the start of the prologue. 1490 FuncInfo->addMustSaveCR(Reg); 1491 } else { 1492 CRSpilled = true; 1493 FuncInfo->setSpillsCR(); 1494 1495 // 32-bit: FP-relative. Note that we made sure CR2-CR4 all have 1496 // the same frame index in PPCRegisterInfo::hasReservedSpillSlot. 1497 CRMIB = BuildMI(*MF, DL, TII.get(PPC::MFCR), PPC::R12) 1498 .addReg(Reg, RegState::ImplicitKill); 1499 1500 MBB.insert(MI, CRMIB); 1501 MBB.insert(MI, addFrameReference(BuildMI(*MF, DL, TII.get(PPC::STW)) 1502 .addReg(PPC::R12, 1503 getKillRegState(true)), 1504 CSI[i].getFrameIdx())); 1505 } 1506 } else { 1507 const TargetRegisterClass *RC = TRI->getMinimalPhysRegClass(Reg); 1508 TII.storeRegToStackSlot(MBB, MI, Reg, true, 1509 CSI[i].getFrameIdx(), RC, TRI); 1510 } 1511 } 1512 return true; 1513 } 1514 1515 static void 1516 restoreCRs(bool isPPC64, bool is31, 1517 bool CR2Spilled, bool CR3Spilled, bool CR4Spilled, 1518 MachineBasicBlock &MBB, MachineBasicBlock::iterator MI, 1519 const std::vector<CalleeSavedInfo> &CSI, unsigned CSIIndex) { 1520 1521 MachineFunction *MF = MBB.getParent(); 1522 const PPCInstrInfo &TII = *MF->getSubtarget<PPCSubtarget>().getInstrInfo(); 1523 DebugLoc DL; 1524 unsigned RestoreOp, MoveReg; 1525 1526 if (isPPC64) 1527 // This is handled during epilogue generation. 1528 return; 1529 else { 1530 // 32-bit: FP-relative 1531 MBB.insert(MI, addFrameReference(BuildMI(*MF, DL, TII.get(PPC::LWZ), 1532 PPC::R12), 1533 CSI[CSIIndex].getFrameIdx())); 1534 RestoreOp = PPC::MTOCRF; 1535 MoveReg = PPC::R12; 1536 } 1537 1538 if (CR2Spilled) 1539 MBB.insert(MI, BuildMI(*MF, DL, TII.get(RestoreOp), PPC::CR2) 1540 .addReg(MoveReg, getKillRegState(!CR3Spilled && !CR4Spilled))); 1541 1542 if (CR3Spilled) 1543 MBB.insert(MI, BuildMI(*MF, DL, TII.get(RestoreOp), PPC::CR3) 1544 .addReg(MoveReg, getKillRegState(!CR4Spilled))); 1545 1546 if (CR4Spilled) 1547 MBB.insert(MI, BuildMI(*MF, DL, TII.get(RestoreOp), PPC::CR4) 1548 .addReg(MoveReg, getKillRegState(true))); 1549 } 1550 1551 void PPCFrameLowering:: 1552 eliminateCallFramePseudoInstr(MachineFunction &MF, MachineBasicBlock &MBB, 1553 MachineBasicBlock::iterator I) const { 1554 const TargetInstrInfo &TII = *Subtarget.getInstrInfo(); 1555 if (MF.getTarget().Options.GuaranteedTailCallOpt && 1556 I->getOpcode() == PPC::ADJCALLSTACKUP) { 1557 // Add (actually subtract) back the amount the callee popped on return. 1558 if (int CalleeAmt = I->getOperand(1).getImm()) { 1559 bool is64Bit = Subtarget.isPPC64(); 1560 CalleeAmt *= -1; 1561 unsigned StackReg = is64Bit ? PPC::X1 : PPC::R1; 1562 unsigned TmpReg = is64Bit ? PPC::X0 : PPC::R0; 1563 unsigned ADDIInstr = is64Bit ? PPC::ADDI8 : PPC::ADDI; 1564 unsigned ADDInstr = is64Bit ? PPC::ADD8 : PPC::ADD4; 1565 unsigned LISInstr = is64Bit ? PPC::LIS8 : PPC::LIS; 1566 unsigned ORIInstr = is64Bit ? PPC::ORI8 : PPC::ORI; 1567 MachineInstr *MI = I; 1568 DebugLoc dl = MI->getDebugLoc(); 1569 1570 if (isInt<16>(CalleeAmt)) { 1571 BuildMI(MBB, I, dl, TII.get(ADDIInstr), StackReg) 1572 .addReg(StackReg, RegState::Kill) 1573 .addImm(CalleeAmt); 1574 } else { 1575 MachineBasicBlock::iterator MBBI = I; 1576 BuildMI(MBB, MBBI, dl, TII.get(LISInstr), TmpReg) 1577 .addImm(CalleeAmt >> 16); 1578 BuildMI(MBB, MBBI, dl, TII.get(ORIInstr), TmpReg) 1579 .addReg(TmpReg, RegState::Kill) 1580 .addImm(CalleeAmt & 0xFFFF); 1581 BuildMI(MBB, MBBI, dl, TII.get(ADDInstr), StackReg) 1582 .addReg(StackReg, RegState::Kill) 1583 .addReg(TmpReg); 1584 } 1585 } 1586 } 1587 // Simply discard ADJCALLSTACKDOWN, ADJCALLSTACKUP instructions. 1588 MBB.erase(I); 1589 } 1590 1591 bool 1592 PPCFrameLowering::restoreCalleeSavedRegisters(MachineBasicBlock &MBB, 1593 MachineBasicBlock::iterator MI, 1594 const std::vector<CalleeSavedInfo> &CSI, 1595 const TargetRegisterInfo *TRI) const { 1596 1597 // Currently, this function only handles SVR4 32- and 64-bit ABIs. 1598 // Return false otherwise to maintain pre-existing behavior. 1599 if (!Subtarget.isSVR4ABI()) 1600 return false; 1601 1602 MachineFunction *MF = MBB.getParent(); 1603 const PPCInstrInfo &TII = 1604 *static_cast<const PPCInstrInfo *>(Subtarget.getInstrInfo()); 1605 bool CR2Spilled = false; 1606 bool CR3Spilled = false; 1607 bool CR4Spilled = false; 1608 unsigned CSIIndex = 0; 1609 1610 // Initialize insertion-point logic; we will be restoring in reverse 1611 // order of spill. 1612 MachineBasicBlock::iterator I = MI, BeforeI = I; 1613 bool AtStart = I == MBB.begin(); 1614 1615 if (!AtStart) 1616 --BeforeI; 1617 1618 for (unsigned i = 0, e = CSI.size(); i != e; ++i) { 1619 unsigned Reg = CSI[i].getReg(); 1620 1621 // Only Darwin actually uses the VRSAVE register, but it can still appear 1622 // here if, for example, @llvm.eh.unwind.init() is used. If we're not on 1623 // Darwin, ignore it. 1624 if (Reg == PPC::VRSAVE && !Subtarget.isDarwinABI()) 1625 continue; 1626 1627 if (Reg == PPC::CR2) { 1628 CR2Spilled = true; 1629 // The spill slot is associated only with CR2, which is the 1630 // first nonvolatile spilled. Save it here. 1631 CSIIndex = i; 1632 continue; 1633 } else if (Reg == PPC::CR3) { 1634 CR3Spilled = true; 1635 continue; 1636 } else if (Reg == PPC::CR4) { 1637 CR4Spilled = true; 1638 continue; 1639 } else { 1640 // When we first encounter a non-CR register after seeing at 1641 // least one CR register, restore all spilled CRs together. 1642 if ((CR2Spilled || CR3Spilled || CR4Spilled) 1643 && !(PPC::CR2 <= Reg && Reg <= PPC::CR4)) { 1644 bool is31 = needsFP(*MF); 1645 restoreCRs(Subtarget.isPPC64(), is31, 1646 CR2Spilled, CR3Spilled, CR4Spilled, 1647 MBB, I, CSI, CSIIndex); 1648 CR2Spilled = CR3Spilled = CR4Spilled = false; 1649 } 1650 1651 // Default behavior for non-CR saves. 1652 const TargetRegisterClass *RC = TRI->getMinimalPhysRegClass(Reg); 1653 TII.loadRegFromStackSlot(MBB, I, Reg, CSI[i].getFrameIdx(), 1654 RC, TRI); 1655 assert(I != MBB.begin() && 1656 "loadRegFromStackSlot didn't insert any code!"); 1657 } 1658 1659 // Insert in reverse order. 1660 if (AtStart) 1661 I = MBB.begin(); 1662 else { 1663 I = BeforeI; 1664 ++I; 1665 } 1666 } 1667 1668 // If we haven't yet spilled the CRs, do so now. 1669 if (CR2Spilled || CR3Spilled || CR4Spilled) { 1670 bool is31 = needsFP(*MF); 1671 restoreCRs(Subtarget.isPPC64(), is31, CR2Spilled, CR3Spilled, CR4Spilled, 1672 MBB, I, CSI, CSIIndex); 1673 } 1674 1675 return true; 1676 } 1677