1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/power/supply/maxim,ds2760.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Maxim DS2760 8 9maintainers: 10 - Sebastian Reichel <sre@kernel.org> 11 12description: | 13 The ds2760 is a w1 slave device and must hence have its sub-node in 14 DT under a w1 bus master node. 15 16allOf: 17 - $ref: power-supply.yaml# 18 19properties: 20 compatible: 21 const: maxim,ds2760 22 23 maxim,pmod-enabled: 24 description: | 25 Allow the DS2760 to enter sleep mode when the DQ line goes low for more than 2 seconds 26 and leave sleep Mode when the DQ line goes high. 27 type: boolean 28 29 maxim,cache-time-ms: 30 description: | 31 Time im milliseconds to cache the data for. 32 When this time expires, the values are read again from the hardware. 33 Defaults to 1000. 34 35 rated-capacity-microamp-hours: 36 description: | 37 The rated capacity of the battery, in mAh. 38 If not specified, the value stored in the non-volatile chip memory is used. 39 40required: 41 - compatible 42 43unevaluatedProperties: false 44