1 /* SPDX-License-Identifier: BSD-3-Clause 2 * Copyright(c) 2010-2017 Intel Corporation 3 */ 4 5 #ifndef _RTE_ETHDEV_H_ 6 #define _RTE_ETHDEV_H_ 7 8 /** 9 * @file 10 * 11 * RTE Ethernet Device API 12 * 13 * The Ethernet Device API is composed of two parts: 14 * 15 * - The application-oriented Ethernet API that includes functions to setup 16 * an Ethernet device (configure it, setup its Rx and Tx queues and start it), 17 * to get its MAC address, the speed and the status of its physical link, 18 * to receive and to transmit packets, and so on. 19 * 20 * - The driver-oriented Ethernet API that exports functions allowing 21 * an Ethernet Poll Mode Driver (PMD) to allocate an Ethernet device instance, 22 * create memzone for HW rings and process registered callbacks, and so on. 23 * PMDs should include ethdev_driver.h instead of this header. 24 * 25 * By default, all the functions of the Ethernet Device API exported by a PMD 26 * are lock-free functions which assume to not be invoked in parallel on 27 * different logical cores to work on the same target object. For instance, 28 * the receive function of a PMD cannot be invoked in parallel on two logical 29 * cores to poll the same Rx queue [of the same port]. Of course, this function 30 * can be invoked in parallel by different logical cores on different Rx queues. 31 * It is the responsibility of the upper level application to enforce this rule. 32 * 33 * If needed, parallel accesses by multiple logical cores to shared queues 34 * shall be explicitly protected by dedicated inline lock-aware functions 35 * built on top of their corresponding lock-free functions of the PMD API. 36 * 37 * In all functions of the Ethernet API, the Ethernet device is 38 * designated by an integer >= 0 named the device port identifier. 39 * 40 * At the Ethernet driver level, Ethernet devices are represented by a generic 41 * data structure of type *rte_eth_dev*. 42 * 43 * Ethernet devices are dynamically registered during the PCI probing phase 44 * performed at EAL initialization time. 45 * When an Ethernet device is being probed, an *rte_eth_dev* structure and 46 * a new port identifier are allocated for that device. Then, the eth_dev_init() 47 * function supplied by the Ethernet driver matching the probed PCI 48 * device is invoked to properly initialize the device. 49 * 50 * The role of the device init function consists of resetting the hardware, 51 * checking access to Non-volatile Memory (NVM), reading the MAC address 52 * from NVM etc. 53 * 54 * If the device init operation is successful, the correspondence between 55 * the port identifier assigned to the new device and its associated 56 * *rte_eth_dev* structure is effectively registered. 57 * Otherwise, both the *rte_eth_dev* structure and the port identifier are 58 * freed. 59 * 60 * The functions exported by the application Ethernet API to setup a device 61 * designated by its port identifier must be invoked in the following order: 62 * - rte_eth_dev_configure() 63 * - rte_eth_tx_queue_setup() 64 * - rte_eth_rx_queue_setup() 65 * - rte_eth_dev_start() 66 * 67 * Then, the network application can invoke, in any order, the functions 68 * exported by the Ethernet API to get the MAC address of a given device, to 69 * get the speed and the status of a device physical link, to receive/transmit 70 * [burst of] packets, and so on. 71 * 72 * If the application wants to change the configuration (i.e. call 73 * rte_eth_dev_configure(), rte_eth_tx_queue_setup(), or 74 * rte_eth_rx_queue_setup()), it must call rte_eth_dev_stop() first to stop the 75 * device and then do the reconfiguration before calling rte_eth_dev_start() 76 * again. The transmit and receive functions should not be invoked when the 77 * device is stopped. 78 * 79 * Please note that some configuration is not stored between calls to 80 * rte_eth_dev_stop()/rte_eth_dev_start(). The following configuration will 81 * be retained: 82 * 83 * - MTU 84 * - flow control settings 85 * - receive mode configuration (promiscuous mode, all-multicast mode, 86 * hardware checksum mode, RSS/VMDq settings etc.) 87 * - VLAN filtering configuration 88 * - default MAC address 89 * - MAC addresses supplied to MAC address array 90 * - flow director filtering mode (but not filtering rules) 91 * - NIC queue statistics mappings 92 * 93 * The following configuration may be retained or not 94 * depending on the device capabilities: 95 * 96 * - flow rules 97 * - flow-related shared objects, e.g. indirect actions 98 * 99 * Any other configuration will not be stored and will need to be re-entered 100 * before a call to rte_eth_dev_start(). 101 * 102 * Finally, a network application can close an Ethernet device by invoking the 103 * rte_eth_dev_close() function. 104 * 105 * Each function of the application Ethernet API invokes a specific function 106 * of the PMD that controls the target device designated by its port 107 * identifier. 108 * For this purpose, all device-specific functions of an Ethernet driver are 109 * supplied through a set of pointers contained in a generic structure of type 110 * *eth_dev_ops*. 111 * The address of the *eth_dev_ops* structure is stored in the *rte_eth_dev* 112 * structure by the device init function of the Ethernet driver, which is 113 * invoked during the PCI probing phase, as explained earlier. 114 * 115 * In other words, each function of the Ethernet API simply retrieves the 116 * *rte_eth_dev* structure associated with the device port identifier and 117 * performs an indirect invocation of the corresponding driver function 118 * supplied in the *eth_dev_ops* structure of the *rte_eth_dev* structure. 119 * 120 * For performance reasons, the address of the burst-oriented Rx and Tx 121 * functions of the Ethernet driver are not contained in the *eth_dev_ops* 122 * structure. Instead, they are directly stored at the beginning of the 123 * *rte_eth_dev* structure to avoid an extra indirect memory access during 124 * their invocation. 125 * 126 * RTE Ethernet device drivers do not use interrupts for transmitting or 127 * receiving. Instead, Ethernet drivers export Poll-Mode receive and transmit 128 * functions to applications. 129 * Both receive and transmit functions are packet-burst oriented to minimize 130 * their cost per packet through the following optimizations: 131 * 132 * - Sharing among multiple packets the incompressible cost of the 133 * invocation of receive/transmit functions. 134 * 135 * - Enabling receive/transmit functions to take advantage of burst-oriented 136 * hardware features (L1 cache, prefetch instructions, NIC head/tail 137 * registers) to minimize the number of CPU cycles per packet, for instance, 138 * by avoiding useless read memory accesses to ring descriptors, or by 139 * systematically using arrays of pointers that exactly fit L1 cache line 140 * boundaries and sizes. 141 * 142 * The burst-oriented receive function does not provide any error notification, 143 * to avoid the corresponding overhead. As a hint, the upper-level application 144 * might check the status of the device link once being systematically returned 145 * a 0 value by the receive function of the driver for a given number of tries. 146 */ 147 148 #ifdef __cplusplus 149 extern "C" { 150 #endif 151 152 #include <stdint.h> 153 154 /* Use this macro to check if LRO API is supported */ 155 #define RTE_ETHDEV_HAS_LRO_SUPPORT 156 157 /* Alias RTE_LIBRTE_ETHDEV_DEBUG for backward compatibility. */ 158 #ifdef RTE_LIBRTE_ETHDEV_DEBUG 159 #define RTE_ETHDEV_DEBUG_RX 160 #define RTE_ETHDEV_DEBUG_TX 161 #endif 162 163 #include <rte_compat.h> 164 #include <rte_log.h> 165 #include <rte_interrupts.h> 166 #include <rte_dev.h> 167 #include <rte_devargs.h> 168 #include <rte_bitops.h> 169 #include <rte_errno.h> 170 #include <rte_common.h> 171 #include <rte_config.h> 172 #include <rte_ether.h> 173 #include <rte_power_intrinsics.h> 174 175 #include "rte_ethdev_trace_fp.h" 176 #include "rte_dev_info.h" 177 178 extern int rte_eth_dev_logtype; 179 180 #define RTE_ETHDEV_LOG(level, ...) \ 181 rte_log(RTE_LOG_ ## level, rte_eth_dev_logtype, "" __VA_ARGS__) 182 183 struct rte_mbuf; 184 185 /** 186 * Initializes a device iterator. 187 * 188 * This iterator allows accessing a list of devices matching some devargs. 189 * 190 * @param iter 191 * Device iterator handle initialized by the function. 192 * The fields bus_str and cls_str might be dynamically allocated, 193 * and could be freed by calling rte_eth_iterator_cleanup(). 194 * 195 * @param devargs 196 * Device description string. 197 * 198 * @return 199 * 0 on successful initialization, negative otherwise. 200 */ 201 int rte_eth_iterator_init(struct rte_dev_iterator *iter, const char *devargs); 202 203 /** 204 * Iterates on devices with devargs filter. 205 * The ownership is not checked. 206 * 207 * The next port ID is returned, and the iterator is updated. 208 * 209 * @param iter 210 * Device iterator handle initialized by rte_eth_iterator_init(). 211 * Some fields bus_str and cls_str might be freed when no more port is found, 212 * by calling rte_eth_iterator_cleanup(). 213 * 214 * @return 215 * A port ID if found, RTE_MAX_ETHPORTS otherwise. 216 */ 217 uint16_t rte_eth_iterator_next(struct rte_dev_iterator *iter); 218 219 /** 220 * Free some allocated fields of the iterator. 221 * 222 * This function is automatically called by rte_eth_iterator_next() 223 * on the last iteration (i.e. when no more matching port is found). 224 * 225 * It is safe to call this function twice; it will do nothing more. 226 * 227 * @param iter 228 * Device iterator handle initialized by rte_eth_iterator_init(). 229 * The fields bus_str and cls_str are freed if needed. 230 */ 231 void rte_eth_iterator_cleanup(struct rte_dev_iterator *iter); 232 233 /** 234 * Macro to iterate over all ethdev ports matching some devargs. 235 * 236 * If a break is done before the end of the loop, 237 * the function rte_eth_iterator_cleanup() must be called. 238 * 239 * @param id 240 * Iterated port ID of type uint16_t. 241 * @param devargs 242 * Device parameters input as string of type char*. 243 * @param iter 244 * Iterator handle of type struct rte_dev_iterator, used internally. 245 */ 246 #define RTE_ETH_FOREACH_MATCHING_DEV(id, devargs, iter) \ 247 for (rte_eth_iterator_init(iter, devargs), \ 248 id = rte_eth_iterator_next(iter); \ 249 id != RTE_MAX_ETHPORTS; \ 250 id = rte_eth_iterator_next(iter)) 251 252 /** 253 * A structure used to retrieve statistics for an Ethernet port. 254 * Not all statistics fields in struct rte_eth_stats are supported 255 * by any type of network interface card (NIC). If any statistics 256 * field is not supported, its value is 0. 257 * All byte-related statistics do not include Ethernet FCS regardless 258 * of whether these bytes have been delivered to the application 259 * (see RTE_ETH_RX_OFFLOAD_KEEP_CRC). 260 */ 261 struct rte_eth_stats { 262 uint64_t ipackets; /**< Total number of successfully received packets. */ 263 uint64_t opackets; /**< Total number of successfully transmitted packets.*/ 264 uint64_t ibytes; /**< Total number of successfully received bytes. */ 265 uint64_t obytes; /**< Total number of successfully transmitted bytes. */ 266 /** 267 * Total of Rx packets dropped by the HW, 268 * because there are no available buffer (i.e. Rx queues are full). 269 */ 270 uint64_t imissed; 271 uint64_t ierrors; /**< Total number of erroneous received packets. */ 272 uint64_t oerrors; /**< Total number of failed transmitted packets. */ 273 uint64_t rx_nombuf; /**< Total number of Rx mbuf allocation failures. */ 274 /* Queue stats are limited to max 256 queues */ 275 /** Total number of queue Rx packets. */ 276 uint64_t q_ipackets[RTE_ETHDEV_QUEUE_STAT_CNTRS]; 277 /** Total number of queue Tx packets. */ 278 uint64_t q_opackets[RTE_ETHDEV_QUEUE_STAT_CNTRS]; 279 /** Total number of successfully received queue bytes. */ 280 uint64_t q_ibytes[RTE_ETHDEV_QUEUE_STAT_CNTRS]; 281 /** Total number of successfully transmitted queue bytes. */ 282 uint64_t q_obytes[RTE_ETHDEV_QUEUE_STAT_CNTRS]; 283 /** Total number of queue packets received that are dropped. */ 284 uint64_t q_errors[RTE_ETHDEV_QUEUE_STAT_CNTRS]; 285 }; 286 287 /**@{@name Link speed capabilities 288 * Device supported speeds bitmap flags 289 */ 290 #define RTE_ETH_LINK_SPEED_AUTONEG 0 /**< Autonegotiate (all speeds) */ 291 #define RTE_ETH_LINK_SPEED_FIXED RTE_BIT32(0) /**< Disable autoneg (fixed speed) */ 292 #define RTE_ETH_LINK_SPEED_10M_HD RTE_BIT32(1) /**< 10 Mbps half-duplex */ 293 #define RTE_ETH_LINK_SPEED_10M RTE_BIT32(2) /**< 10 Mbps full-duplex */ 294 #define RTE_ETH_LINK_SPEED_100M_HD RTE_BIT32(3) /**< 100 Mbps half-duplex */ 295 #define RTE_ETH_LINK_SPEED_100M RTE_BIT32(4) /**< 100 Mbps full-duplex */ 296 #define RTE_ETH_LINK_SPEED_1G RTE_BIT32(5) /**< 1 Gbps */ 297 #define RTE_ETH_LINK_SPEED_2_5G RTE_BIT32(6) /**< 2.5 Gbps */ 298 #define RTE_ETH_LINK_SPEED_5G RTE_BIT32(7) /**< 5 Gbps */ 299 #define RTE_ETH_LINK_SPEED_10G RTE_BIT32(8) /**< 10 Gbps */ 300 #define RTE_ETH_LINK_SPEED_20G RTE_BIT32(9) /**< 20 Gbps */ 301 #define RTE_ETH_LINK_SPEED_25G RTE_BIT32(10) /**< 25 Gbps */ 302 #define RTE_ETH_LINK_SPEED_40G RTE_BIT32(11) /**< 40 Gbps */ 303 #define RTE_ETH_LINK_SPEED_50G RTE_BIT32(12) /**< 50 Gbps */ 304 #define RTE_ETH_LINK_SPEED_56G RTE_BIT32(13) /**< 56 Gbps */ 305 #define RTE_ETH_LINK_SPEED_100G RTE_BIT32(14) /**< 100 Gbps */ 306 #define RTE_ETH_LINK_SPEED_200G RTE_BIT32(15) /**< 200 Gbps */ 307 /**@}*/ 308 309 #define ETH_LINK_SPEED_AUTONEG RTE_DEPRECATED(ETH_LINK_SPEED_AUTONEG) RTE_ETH_LINK_SPEED_AUTONEG 310 #define ETH_LINK_SPEED_FIXED RTE_DEPRECATED(ETH_LINK_SPEED_FIXED) RTE_ETH_LINK_SPEED_FIXED 311 #define ETH_LINK_SPEED_10M_HD RTE_DEPRECATED(ETH_LINK_SPEED_10M_HD) RTE_ETH_LINK_SPEED_10M_HD 312 #define ETH_LINK_SPEED_10M RTE_DEPRECATED(ETH_LINK_SPEED_10M) RTE_ETH_LINK_SPEED_10M 313 #define ETH_LINK_SPEED_100M_HD RTE_DEPRECATED(ETH_LINK_SPEED_100M_HD) RTE_ETH_LINK_SPEED_100M_HD 314 #define ETH_LINK_SPEED_100M RTE_DEPRECATED(ETH_LINK_SPEED_100M) RTE_ETH_LINK_SPEED_100M 315 #define ETH_LINK_SPEED_1G RTE_DEPRECATED(ETH_LINK_SPEED_1G) RTE_ETH_LINK_SPEED_1G 316 #define ETH_LINK_SPEED_2_5G RTE_DEPRECATED(ETH_LINK_SPEED_2_5G) RTE_ETH_LINK_SPEED_2_5G 317 #define ETH_LINK_SPEED_5G RTE_DEPRECATED(ETH_LINK_SPEED_5G) RTE_ETH_LINK_SPEED_5G 318 #define ETH_LINK_SPEED_10G RTE_DEPRECATED(ETH_LINK_SPEED_10G) RTE_ETH_LINK_SPEED_10G 319 #define ETH_LINK_SPEED_20G RTE_DEPRECATED(ETH_LINK_SPEED_20G) RTE_ETH_LINK_SPEED_20G 320 #define ETH_LINK_SPEED_25G RTE_DEPRECATED(ETH_LINK_SPEED_25G) RTE_ETH_LINK_SPEED_25G 321 #define ETH_LINK_SPEED_40G RTE_DEPRECATED(ETH_LINK_SPEED_40G) RTE_ETH_LINK_SPEED_40G 322 #define ETH_LINK_SPEED_50G RTE_DEPRECATED(ETH_LINK_SPEED_50G) RTE_ETH_LINK_SPEED_50G 323 #define ETH_LINK_SPEED_56G RTE_DEPRECATED(ETH_LINK_SPEED_56G) RTE_ETH_LINK_SPEED_56G 324 #define ETH_LINK_SPEED_100G RTE_DEPRECATED(ETH_LINK_SPEED_100G) RTE_ETH_LINK_SPEED_100G 325 #define ETH_LINK_SPEED_200G RTE_DEPRECATED(ETH_LINK_SPEED_200G) RTE_ETH_LINK_SPEED_200G 326 327 /**@{@name Link speed 328 * Ethernet numeric link speeds in Mbps 329 */ 330 #define RTE_ETH_SPEED_NUM_NONE 0 /**< Not defined */ 331 #define RTE_ETH_SPEED_NUM_10M 10 /**< 10 Mbps */ 332 #define RTE_ETH_SPEED_NUM_100M 100 /**< 100 Mbps */ 333 #define RTE_ETH_SPEED_NUM_1G 1000 /**< 1 Gbps */ 334 #define RTE_ETH_SPEED_NUM_2_5G 2500 /**< 2.5 Gbps */ 335 #define RTE_ETH_SPEED_NUM_5G 5000 /**< 5 Gbps */ 336 #define RTE_ETH_SPEED_NUM_10G 10000 /**< 10 Gbps */ 337 #define RTE_ETH_SPEED_NUM_20G 20000 /**< 20 Gbps */ 338 #define RTE_ETH_SPEED_NUM_25G 25000 /**< 25 Gbps */ 339 #define RTE_ETH_SPEED_NUM_40G 40000 /**< 40 Gbps */ 340 #define RTE_ETH_SPEED_NUM_50G 50000 /**< 50 Gbps */ 341 #define RTE_ETH_SPEED_NUM_56G 56000 /**< 56 Gbps */ 342 #define RTE_ETH_SPEED_NUM_100G 100000 /**< 100 Gbps */ 343 #define RTE_ETH_SPEED_NUM_200G 200000 /**< 200 Gbps */ 344 #define RTE_ETH_SPEED_NUM_UNKNOWN UINT32_MAX /**< Unknown */ 345 /**@}*/ 346 347 #define ETH_SPEED_NUM_NONE RTE_DEPRECATED(ETH_SPEED_NUM_NONE) RTE_ETH_SPEED_NUM_NONE 348 #define ETH_SPEED_NUM_10M RTE_DEPRECATED(ETH_SPEED_NUM_10M) RTE_ETH_SPEED_NUM_10M 349 #define ETH_SPEED_NUM_100M RTE_DEPRECATED(ETH_SPEED_NUM_100M) RTE_ETH_SPEED_NUM_100M 350 #define ETH_SPEED_NUM_1G RTE_DEPRECATED(ETH_SPEED_NUM_1G) RTE_ETH_SPEED_NUM_1G 351 #define ETH_SPEED_NUM_2_5G RTE_DEPRECATED(ETH_SPEED_NUM_2_5G) RTE_ETH_SPEED_NUM_2_5G 352 #define ETH_SPEED_NUM_5G RTE_DEPRECATED(ETH_SPEED_NUM_5G) RTE_ETH_SPEED_NUM_5G 353 #define ETH_SPEED_NUM_10G RTE_DEPRECATED(ETH_SPEED_NUM_10G) RTE_ETH_SPEED_NUM_10G 354 #define ETH_SPEED_NUM_20G RTE_DEPRECATED(ETH_SPEED_NUM_20G) RTE_ETH_SPEED_NUM_20G 355 #define ETH_SPEED_NUM_25G RTE_DEPRECATED(ETH_SPEED_NUM_25G) RTE_ETH_SPEED_NUM_25G 356 #define ETH_SPEED_NUM_40G RTE_DEPRECATED(ETH_SPEED_NUM_40G) RTE_ETH_SPEED_NUM_40G 357 #define ETH_SPEED_NUM_50G RTE_DEPRECATED(ETH_SPEED_NUM_50G) RTE_ETH_SPEED_NUM_50G 358 #define ETH_SPEED_NUM_56G RTE_DEPRECATED(ETH_SPEED_NUM_56G) RTE_ETH_SPEED_NUM_56G 359 #define ETH_SPEED_NUM_100G RTE_DEPRECATED(ETH_SPEED_NUM_100G) RTE_ETH_SPEED_NUM_100G 360 #define ETH_SPEED_NUM_200G RTE_DEPRECATED(ETH_SPEED_NUM_200G) RTE_ETH_SPEED_NUM_200G 361 #define ETH_SPEED_NUM_UNKNOWN RTE_DEPRECATED(ETH_SPEED_NUM_UNKNOWN) RTE_ETH_SPEED_NUM_UNKNOWN 362 363 /** 364 * A structure used to retrieve link-level information of an Ethernet port. 365 */ 366 __extension__ 367 struct rte_eth_link { 368 uint32_t link_speed; /**< RTE_ETH_SPEED_NUM_ */ 369 uint16_t link_duplex : 1; /**< RTE_ETH_LINK_[HALF/FULL]_DUPLEX */ 370 uint16_t link_autoneg : 1; /**< RTE_ETH_LINK_[AUTONEG/FIXED] */ 371 uint16_t link_status : 1; /**< RTE_ETH_LINK_[DOWN/UP] */ 372 } __rte_aligned(8); /**< aligned for atomic64 read/write */ 373 374 /**@{@name Link negotiation 375 * Constants used in link management. 376 */ 377 #define RTE_ETH_LINK_HALF_DUPLEX 0 /**< Half-duplex connection (see link_duplex). */ 378 #define RTE_ETH_LINK_FULL_DUPLEX 1 /**< Full-duplex connection (see link_duplex). */ 379 #define RTE_ETH_LINK_DOWN 0 /**< Link is down (see link_status). */ 380 #define RTE_ETH_LINK_UP 1 /**< Link is up (see link_status). */ 381 #define RTE_ETH_LINK_FIXED 0 /**< No autonegotiation (see link_autoneg). */ 382 #define RTE_ETH_LINK_AUTONEG 1 /**< Autonegotiated (see link_autoneg). */ 383 #define RTE_ETH_LINK_MAX_STR_LEN 40 /**< Max length of default link string. */ 384 /**@}*/ 385 386 #define ETH_LINK_HALF_DUPLEX RTE_DEPRECATED(ETH_LINK_HALF_DUPLEX) RTE_ETH_LINK_HALF_DUPLEX 387 #define ETH_LINK_FULL_DUPLEX RTE_DEPRECATED(ETH_LINK_FULL_DUPLEX) RTE_ETH_LINK_FULL_DUPLEX 388 #define ETH_LINK_DOWN RTE_DEPRECATED(ETH_LINK_DOWN) RTE_ETH_LINK_DOWN 389 #define ETH_LINK_UP RTE_DEPRECATED(ETH_LINK_UP) RTE_ETH_LINK_UP 390 #define ETH_LINK_FIXED RTE_DEPRECATED(ETH_LINK_FIXED) RTE_ETH_LINK_FIXED 391 #define ETH_LINK_AUTONEG RTE_DEPRECATED(ETH_LINK_AUTONEG) RTE_ETH_LINK_AUTONEG 392 393 /** 394 * A structure used to configure the ring threshold registers of an Rx/Tx 395 * queue for an Ethernet port. 396 */ 397 struct rte_eth_thresh { 398 uint8_t pthresh; /**< Ring prefetch threshold. */ 399 uint8_t hthresh; /**< Ring host threshold. */ 400 uint8_t wthresh; /**< Ring writeback threshold. */ 401 }; 402 403 /**@{@name Multi-queue mode 404 * @see rte_eth_conf.rxmode.mq_mode. 405 */ 406 #define RTE_ETH_MQ_RX_RSS_FLAG RTE_BIT32(0) /**< Enable RSS. @see rte_eth_rss_conf */ 407 #define RTE_ETH_MQ_RX_DCB_FLAG RTE_BIT32(1) /**< Enable DCB. */ 408 #define RTE_ETH_MQ_RX_VMDQ_FLAG RTE_BIT32(2) /**< Enable VMDq. */ 409 /**@}*/ 410 411 #define ETH_MQ_RX_RSS_FLAG RTE_DEPRECATED(ETH_MQ_RX_RSS_FLAG) RTE_ETH_MQ_RX_RSS_FLAG 412 #define ETH_MQ_RX_DCB_FLAG RTE_DEPRECATED(ETH_MQ_RX_DCB_FLAG) RTE_ETH_MQ_RX_DCB_FLAG 413 #define ETH_MQ_RX_VMDQ_FLAG RTE_DEPRECATED(ETH_MQ_RX_VMDQ_FLAG) RTE_ETH_MQ_RX_VMDQ_FLAG 414 415 /** 416 * A set of values to identify what method is to be used to route 417 * packets to multiple queues. 418 */ 419 enum rte_eth_rx_mq_mode { 420 /** None of DCB, RSS or VMDq mode */ 421 RTE_ETH_MQ_RX_NONE = 0, 422 423 /** For Rx side, only RSS is on */ 424 RTE_ETH_MQ_RX_RSS = RTE_ETH_MQ_RX_RSS_FLAG, 425 /** For Rx side,only DCB is on. */ 426 RTE_ETH_MQ_RX_DCB = RTE_ETH_MQ_RX_DCB_FLAG, 427 /** Both DCB and RSS enable */ 428 RTE_ETH_MQ_RX_DCB_RSS = RTE_ETH_MQ_RX_RSS_FLAG | RTE_ETH_MQ_RX_DCB_FLAG, 429 430 /** Only VMDq, no RSS nor DCB */ 431 RTE_ETH_MQ_RX_VMDQ_ONLY = RTE_ETH_MQ_RX_VMDQ_FLAG, 432 /** RSS mode with VMDq */ 433 RTE_ETH_MQ_RX_VMDQ_RSS = RTE_ETH_MQ_RX_RSS_FLAG | RTE_ETH_MQ_RX_VMDQ_FLAG, 434 /** Use VMDq+DCB to route traffic to queues */ 435 RTE_ETH_MQ_RX_VMDQ_DCB = RTE_ETH_MQ_RX_VMDQ_FLAG | RTE_ETH_MQ_RX_DCB_FLAG, 436 /** Enable both VMDq and DCB in VMDq */ 437 RTE_ETH_MQ_RX_VMDQ_DCB_RSS = RTE_ETH_MQ_RX_RSS_FLAG | RTE_ETH_MQ_RX_DCB_FLAG | 438 RTE_ETH_MQ_RX_VMDQ_FLAG, 439 }; 440 441 #define ETH_MQ_RX_NONE RTE_DEPRECATED(ETH_MQ_RX_NONE) RTE_ETH_MQ_RX_NONE 442 #define ETH_MQ_RX_RSS RTE_DEPRECATED(ETH_MQ_RX_RSS) RTE_ETH_MQ_RX_RSS 443 #define ETH_MQ_RX_DCB RTE_DEPRECATED(ETH_MQ_RX_DCB) RTE_ETH_MQ_RX_DCB 444 #define ETH_MQ_RX_DCB_RSS RTE_DEPRECATED(ETH_MQ_RX_DCB_RSS) RTE_ETH_MQ_RX_DCB_RSS 445 #define ETH_MQ_RX_VMDQ_ONLY RTE_DEPRECATED(ETH_MQ_RX_VMDQ_ONLY) RTE_ETH_MQ_RX_VMDQ_ONLY 446 #define ETH_MQ_RX_VMDQ_RSS RTE_DEPRECATED(ETH_MQ_RX_VMDQ_RSS) RTE_ETH_MQ_RX_VMDQ_RSS 447 #define ETH_MQ_RX_VMDQ_DCB RTE_DEPRECATED(ETH_MQ_RX_VMDQ_DCB) RTE_ETH_MQ_RX_VMDQ_DCB 448 #define ETH_MQ_RX_VMDQ_DCB_RSS RTE_DEPRECATED(ETH_MQ_RX_VMDQ_DCB_RSS) RTE_ETH_MQ_RX_VMDQ_DCB_RSS 449 450 /** 451 * A set of values to identify what method is to be used to transmit 452 * packets using multi-TCs. 453 */ 454 enum rte_eth_tx_mq_mode { 455 RTE_ETH_MQ_TX_NONE = 0, /**< It is in neither DCB nor VT mode. */ 456 RTE_ETH_MQ_TX_DCB, /**< For Tx side,only DCB is on. */ 457 RTE_ETH_MQ_TX_VMDQ_DCB, /**< For Tx side,both DCB and VT is on. */ 458 RTE_ETH_MQ_TX_VMDQ_ONLY, /**< Only VT on, no DCB */ 459 }; 460 461 #define ETH_MQ_TX_NONE RTE_DEPRECATED(ETH_MQ_TX_NONE) RTE_ETH_MQ_TX_NONE 462 #define ETH_MQ_TX_DCB RTE_DEPRECATED(ETH_MQ_TX_DCB) RTE_ETH_MQ_TX_DCB 463 #define ETH_MQ_TX_VMDQ_DCB RTE_DEPRECATED(ETH_MQ_TX_VMDQ_DCB) RTE_ETH_MQ_TX_VMDQ_DCB 464 #define ETH_MQ_TX_VMDQ_ONLY RTE_DEPRECATED(ETH_MQ_TX_VMDQ_ONLY) RTE_ETH_MQ_TX_VMDQ_ONLY 465 466 /** 467 * A structure used to configure the Rx features of an Ethernet port. 468 */ 469 struct rte_eth_rxmode { 470 /** The multi-queue packet distribution mode to be used, e.g. RSS. */ 471 enum rte_eth_rx_mq_mode mq_mode; 472 uint32_t mtu; /**< Requested MTU. */ 473 /** Maximum allowed size of LRO aggregated packet. */ 474 uint32_t max_lro_pkt_size; 475 uint16_t split_hdr_size; /**< hdr buf size (header_split enabled).*/ 476 /** 477 * Per-port Rx offloads to be set using RTE_ETH_RX_OFFLOAD_* flags. 478 * Only offloads set on rx_offload_capa field on rte_eth_dev_info 479 * structure are allowed to be set. 480 */ 481 uint64_t offloads; 482 483 uint64_t reserved_64s[2]; /**< Reserved for future fields */ 484 void *reserved_ptrs[2]; /**< Reserved for future fields */ 485 }; 486 487 /** 488 * VLAN types to indicate if it is for single VLAN, inner VLAN or outer VLAN. 489 * Note that single VLAN is treated the same as inner VLAN. 490 */ 491 enum rte_vlan_type { 492 RTE_ETH_VLAN_TYPE_UNKNOWN = 0, 493 RTE_ETH_VLAN_TYPE_INNER, /**< Inner VLAN. */ 494 RTE_ETH_VLAN_TYPE_OUTER, /**< Single VLAN, or outer VLAN. */ 495 RTE_ETH_VLAN_TYPE_MAX, 496 }; 497 498 #define ETH_VLAN_TYPE_UNKNOWN RTE_DEPRECATED(ETH_VLAN_TYPE_UNKNOWN) RTE_ETH_VLAN_TYPE_UNKNOWN 499 #define ETH_VLAN_TYPE_INNER RTE_DEPRECATED(ETH_VLAN_TYPE_INNER) RTE_ETH_VLAN_TYPE_INNER 500 #define ETH_VLAN_TYPE_OUTER RTE_DEPRECATED(ETH_VLAN_TYPE_OUTER) RTE_ETH_VLAN_TYPE_OUTER 501 #define ETH_VLAN_TYPE_MAX RTE_DEPRECATED(ETH_VLAN_TYPE_MAX) RTE_ETH_VLAN_TYPE_MAX 502 503 /** 504 * A structure used to describe a VLAN filter. 505 * If the bit corresponding to a VID is set, such VID is on. 506 */ 507 struct rte_vlan_filter_conf { 508 uint64_t ids[64]; 509 }; 510 511 /** 512 * A structure used to configure the Receive Side Scaling (RSS) feature 513 * of an Ethernet port. 514 * If not NULL, the *rss_key* pointer of the *rss_conf* structure points 515 * to an array holding the RSS key to use for hashing specific header 516 * fields of received packets. The length of this array should be indicated 517 * by *rss_key_len* below. Otherwise, a default random hash key is used by 518 * the device driver. 519 * 520 * The *rss_key_len* field of the *rss_conf* structure indicates the length 521 * in bytes of the array pointed by *rss_key*. To be compatible, this length 522 * will be checked in i40e only. Others assume 40 bytes to be used as before. 523 * 524 * The *rss_hf* field of the *rss_conf* structure indicates the different 525 * types of IPv4/IPv6 packets to which the RSS hashing must be applied. 526 * Supplying an *rss_hf* equal to zero disables the RSS feature. 527 */ 528 struct rte_eth_rss_conf { 529 uint8_t *rss_key; /**< If not NULL, 40-byte hash key. */ 530 uint8_t rss_key_len; /**< hash key length in bytes. */ 531 uint64_t rss_hf; /**< Hash functions to apply - see below. */ 532 }; 533 534 /* 535 * A packet can be identified by hardware as different flow types. Different 536 * NIC hardware may support different flow types. 537 * Basically, the NIC hardware identifies the flow type as deep protocol as 538 * possible, and exclusively. For example, if a packet is identified as 539 * 'RTE_ETH_FLOW_NONFRAG_IPV4_TCP', it will not be any of other flow types, 540 * though it is an actual IPV4 packet. 541 */ 542 #define RTE_ETH_FLOW_UNKNOWN 0 543 #define RTE_ETH_FLOW_RAW 1 544 #define RTE_ETH_FLOW_IPV4 2 545 #define RTE_ETH_FLOW_FRAG_IPV4 3 546 #define RTE_ETH_FLOW_NONFRAG_IPV4_TCP 4 547 #define RTE_ETH_FLOW_NONFRAG_IPV4_UDP 5 548 #define RTE_ETH_FLOW_NONFRAG_IPV4_SCTP 6 549 #define RTE_ETH_FLOW_NONFRAG_IPV4_OTHER 7 550 #define RTE_ETH_FLOW_IPV6 8 551 #define RTE_ETH_FLOW_FRAG_IPV6 9 552 #define RTE_ETH_FLOW_NONFRAG_IPV6_TCP 10 553 #define RTE_ETH_FLOW_NONFRAG_IPV6_UDP 11 554 #define RTE_ETH_FLOW_NONFRAG_IPV6_SCTP 12 555 #define RTE_ETH_FLOW_NONFRAG_IPV6_OTHER 13 556 #define RTE_ETH_FLOW_L2_PAYLOAD 14 557 #define RTE_ETH_FLOW_IPV6_EX 15 558 #define RTE_ETH_FLOW_IPV6_TCP_EX 16 559 #define RTE_ETH_FLOW_IPV6_UDP_EX 17 560 /** Consider device port number as a flow differentiator */ 561 #define RTE_ETH_FLOW_PORT 18 562 #define RTE_ETH_FLOW_VXLAN 19 /**< VXLAN protocol based flow */ 563 #define RTE_ETH_FLOW_GENEVE 20 /**< GENEVE protocol based flow */ 564 #define RTE_ETH_FLOW_NVGRE 21 /**< NVGRE protocol based flow */ 565 #define RTE_ETH_FLOW_VXLAN_GPE 22 /**< VXLAN-GPE protocol based flow */ 566 #define RTE_ETH_FLOW_GTPU 23 /**< GTPU protocol based flow */ 567 #define RTE_ETH_FLOW_MAX 24 568 569 /* 570 * Below macros are defined for RSS offload types, they can be used to 571 * fill rte_eth_rss_conf.rss_hf or rte_flow_action_rss.types. 572 */ 573 #define RTE_ETH_RSS_IPV4 RTE_BIT64(2) 574 #define RTE_ETH_RSS_FRAG_IPV4 RTE_BIT64(3) 575 #define RTE_ETH_RSS_NONFRAG_IPV4_TCP RTE_BIT64(4) 576 #define RTE_ETH_RSS_NONFRAG_IPV4_UDP RTE_BIT64(5) 577 #define RTE_ETH_RSS_NONFRAG_IPV4_SCTP RTE_BIT64(6) 578 #define RTE_ETH_RSS_NONFRAG_IPV4_OTHER RTE_BIT64(7) 579 #define RTE_ETH_RSS_IPV6 RTE_BIT64(8) 580 #define RTE_ETH_RSS_FRAG_IPV6 RTE_BIT64(9) 581 #define RTE_ETH_RSS_NONFRAG_IPV6_TCP RTE_BIT64(10) 582 #define RTE_ETH_RSS_NONFRAG_IPV6_UDP RTE_BIT64(11) 583 #define RTE_ETH_RSS_NONFRAG_IPV6_SCTP RTE_BIT64(12) 584 #define RTE_ETH_RSS_NONFRAG_IPV6_OTHER RTE_BIT64(13) 585 #define RTE_ETH_RSS_L2_PAYLOAD RTE_BIT64(14) 586 #define RTE_ETH_RSS_IPV6_EX RTE_BIT64(15) 587 #define RTE_ETH_RSS_IPV6_TCP_EX RTE_BIT64(16) 588 #define RTE_ETH_RSS_IPV6_UDP_EX RTE_BIT64(17) 589 #define RTE_ETH_RSS_PORT RTE_BIT64(18) 590 #define RTE_ETH_RSS_VXLAN RTE_BIT64(19) 591 #define RTE_ETH_RSS_GENEVE RTE_BIT64(20) 592 #define RTE_ETH_RSS_NVGRE RTE_BIT64(21) 593 #define RTE_ETH_RSS_GTPU RTE_BIT64(23) 594 #define RTE_ETH_RSS_ETH RTE_BIT64(24) 595 #define RTE_ETH_RSS_S_VLAN RTE_BIT64(25) 596 #define RTE_ETH_RSS_C_VLAN RTE_BIT64(26) 597 #define RTE_ETH_RSS_ESP RTE_BIT64(27) 598 #define RTE_ETH_RSS_AH RTE_BIT64(28) 599 #define RTE_ETH_RSS_L2TPV3 RTE_BIT64(29) 600 #define RTE_ETH_RSS_PFCP RTE_BIT64(30) 601 #define RTE_ETH_RSS_PPPOE RTE_BIT64(31) 602 #define RTE_ETH_RSS_ECPRI RTE_BIT64(32) 603 #define RTE_ETH_RSS_MPLS RTE_BIT64(33) 604 #define RTE_ETH_RSS_IPV4_CHKSUM RTE_BIT64(34) 605 606 #define ETH_RSS_IPV4 RTE_DEPRECATED(ETH_RSS_IPV4) RTE_ETH_RSS_IPV4 607 #define ETH_RSS_FRAG_IPV4 RTE_DEPRECATED(ETH_RSS_FRAG_IPV4) RTE_ETH_RSS_FRAG_IPV4 608 #define ETH_RSS_NONFRAG_IPV4_TCP RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV4_TCP) RTE_ETH_RSS_NONFRAG_IPV4_TCP 609 #define ETH_RSS_NONFRAG_IPV4_UDP RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV4_UDP) RTE_ETH_RSS_NONFRAG_IPV4_UDP 610 #define ETH_RSS_NONFRAG_IPV4_SCTP RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV4_SCTP) RTE_ETH_RSS_NONFRAG_IPV4_SCTP 611 #define ETH_RSS_NONFRAG_IPV4_OTHER RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV4_OTHER) RTE_ETH_RSS_NONFRAG_IPV4_OTHER 612 #define ETH_RSS_IPV6 RTE_DEPRECATED(ETH_RSS_IPV6) RTE_ETH_RSS_IPV6 613 #define ETH_RSS_FRAG_IPV6 RTE_DEPRECATED(ETH_RSS_FRAG_IPV6) RTE_ETH_RSS_FRAG_IPV6 614 #define ETH_RSS_NONFRAG_IPV6_TCP RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV6_TCP) RTE_ETH_RSS_NONFRAG_IPV6_TCP 615 #define ETH_RSS_NONFRAG_IPV6_UDP RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV6_UDP) RTE_ETH_RSS_NONFRAG_IPV6_UDP 616 #define ETH_RSS_NONFRAG_IPV6_SCTP RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV6_SCTP) RTE_ETH_RSS_NONFRAG_IPV6_SCTP 617 #define ETH_RSS_NONFRAG_IPV6_OTHER RTE_DEPRECATED(ETH_RSS_NONFRAG_IPV6_OTHER) RTE_ETH_RSS_NONFRAG_IPV6_OTHER 618 #define ETH_RSS_L2_PAYLOAD RTE_DEPRECATED(ETH_RSS_L2_PAYLOAD) RTE_ETH_RSS_L2_PAYLOAD 619 #define ETH_RSS_IPV6_EX RTE_DEPRECATED(ETH_RSS_IPV6_EX) RTE_ETH_RSS_IPV6_EX 620 #define ETH_RSS_IPV6_TCP_EX RTE_DEPRECATED(ETH_RSS_IPV6_TCP_EX) RTE_ETH_RSS_IPV6_TCP_EX 621 #define ETH_RSS_IPV6_UDP_EX RTE_DEPRECATED(ETH_RSS_IPV6_UDP_EX) RTE_ETH_RSS_IPV6_UDP_EX 622 #define ETH_RSS_PORT RTE_DEPRECATED(ETH_RSS_PORT) RTE_ETH_RSS_PORT 623 #define ETH_RSS_VXLAN RTE_DEPRECATED(ETH_RSS_VXLAN) RTE_ETH_RSS_VXLAN 624 #define ETH_RSS_GENEVE RTE_DEPRECATED(ETH_RSS_GENEVE) RTE_ETH_RSS_GENEVE 625 #define ETH_RSS_NVGRE RTE_DEPRECATED(ETH_RSS_NVGRE) RTE_ETH_RSS_NVGRE 626 #define ETH_RSS_GTPU RTE_DEPRECATED(ETH_RSS_GTPU) RTE_ETH_RSS_GTPU 627 #define ETH_RSS_ETH RTE_DEPRECATED(ETH_RSS_ETH) RTE_ETH_RSS_ETH 628 #define ETH_RSS_S_VLAN RTE_DEPRECATED(ETH_RSS_S_VLAN) RTE_ETH_RSS_S_VLAN 629 #define ETH_RSS_C_VLAN RTE_DEPRECATED(ETH_RSS_C_VLAN) RTE_ETH_RSS_C_VLAN 630 #define ETH_RSS_ESP RTE_DEPRECATED(ETH_RSS_ESP) RTE_ETH_RSS_ESP 631 #define ETH_RSS_AH RTE_DEPRECATED(ETH_RSS_AH) RTE_ETH_RSS_AH 632 #define ETH_RSS_L2TPV3 RTE_DEPRECATED(ETH_RSS_L2TPV3) RTE_ETH_RSS_L2TPV3 633 #define ETH_RSS_PFCP RTE_DEPRECATED(ETH_RSS_PFCP) RTE_ETH_RSS_PFCP 634 #define ETH_RSS_PPPOE RTE_DEPRECATED(ETH_RSS_PPPOE) RTE_ETH_RSS_PPPOE 635 #define ETH_RSS_ECPRI RTE_DEPRECATED(ETH_RSS_ECPRI) RTE_ETH_RSS_ECPRI 636 #define ETH_RSS_MPLS RTE_DEPRECATED(ETH_RSS_MPLS) RTE_ETH_RSS_MPLS 637 #define ETH_RSS_IPV4_CHKSUM RTE_DEPRECATED(ETH_RSS_IPV4_CHKSUM) RTE_ETH_RSS_IPV4_CHKSUM 638 639 /** 640 * The ETH_RSS_L4_CHKSUM works on checksum field of any L4 header. 641 * It is similar to ETH_RSS_PORT that they don't specify the specific type of 642 * L4 header. This macro is defined to replace some specific L4 (TCP/UDP/SCTP) 643 * checksum type for constructing the use of RSS offload bits. 644 * 645 * Due to above reason, some old APIs (and configuration) don't support 646 * RTE_ETH_RSS_L4_CHKSUM. The rte_flow RSS API supports it. 647 * 648 * For the case that checksum is not used in an UDP header, 649 * it takes the reserved value 0 as input for the hash function. 650 */ 651 #define RTE_ETH_RSS_L4_CHKSUM RTE_BIT64(35) 652 #define ETH_RSS_L4_CHKSUM RTE_DEPRECATED(ETH_RSS_L4_CHKSUM) RTE_ETH_RSS_L4_CHKSUM 653 654 #define RTE_ETH_RSS_L2TPV2 RTE_BIT64(36) 655 656 /* 657 * We use the following macros to combine with above RTE_ETH_RSS_* for 658 * more specific input set selection. These bits are defined starting 659 * from the high end of the 64 bits. 660 * Note: If we use above RTE_ETH_RSS_* without SRC/DST_ONLY, it represents 661 * both SRC and DST are taken into account. If SRC_ONLY and DST_ONLY of 662 * the same level are used simultaneously, it is the same case as none of 663 * them are added. 664 */ 665 #define RTE_ETH_RSS_L3_SRC_ONLY RTE_BIT64(63) 666 #define RTE_ETH_RSS_L3_DST_ONLY RTE_BIT64(62) 667 #define RTE_ETH_RSS_L4_SRC_ONLY RTE_BIT64(61) 668 #define RTE_ETH_RSS_L4_DST_ONLY RTE_BIT64(60) 669 #define RTE_ETH_RSS_L2_SRC_ONLY RTE_BIT64(59) 670 #define RTE_ETH_RSS_L2_DST_ONLY RTE_BIT64(58) 671 672 #define ETH_RSS_L3_SRC_ONLY RTE_DEPRECATED(ETH_RSS_L3_SRC_ONLY) RTE_ETH_RSS_L3_SRC_ONLY 673 #define ETH_RSS_L3_DST_ONLY RTE_DEPRECATED(ETH_RSS_L3_DST_ONLY) RTE_ETH_RSS_L3_DST_ONLY 674 #define ETH_RSS_L4_SRC_ONLY RTE_DEPRECATED(ETH_RSS_L4_SRC_ONLY) RTE_ETH_RSS_L4_SRC_ONLY 675 #define ETH_RSS_L4_DST_ONLY RTE_DEPRECATED(ETH_RSS_L4_DST_ONLY) RTE_ETH_RSS_L4_DST_ONLY 676 #define ETH_RSS_L2_SRC_ONLY RTE_DEPRECATED(ETH_RSS_L2_SRC_ONLY) RTE_ETH_RSS_L2_SRC_ONLY 677 #define ETH_RSS_L2_DST_ONLY RTE_DEPRECATED(ETH_RSS_L2_DST_ONLY) RTE_ETH_RSS_L2_DST_ONLY 678 679 /* 680 * Only select IPV6 address prefix as RSS input set according to 681 * https://tools.ietf.org/html/rfc6052 682 * Must be combined with RTE_ETH_RSS_IPV6, RTE_ETH_RSS_NONFRAG_IPV6_UDP, 683 * RTE_ETH_RSS_NONFRAG_IPV6_TCP, RTE_ETH_RSS_NONFRAG_IPV6_SCTP. 684 */ 685 #define RTE_ETH_RSS_L3_PRE32 RTE_BIT64(57) 686 #define RTE_ETH_RSS_L3_PRE40 RTE_BIT64(56) 687 #define RTE_ETH_RSS_L3_PRE48 RTE_BIT64(55) 688 #define RTE_ETH_RSS_L3_PRE56 RTE_BIT64(54) 689 #define RTE_ETH_RSS_L3_PRE64 RTE_BIT64(53) 690 #define RTE_ETH_RSS_L3_PRE96 RTE_BIT64(52) 691 692 /* 693 * Use the following macros to combine with the above layers 694 * to choose inner and outer layers or both for RSS computation. 695 * Bits 50 and 51 are reserved for this. 696 */ 697 698 /** 699 * level 0, requests the default behavior. 700 * Depending on the packet type, it can mean outermost, innermost, 701 * anything in between or even no RSS. 702 * It basically stands for the innermost encapsulation level RSS 703 * can be performed on according to PMD and device capabilities. 704 */ 705 #define RTE_ETH_RSS_LEVEL_PMD_DEFAULT (UINT64_C(0) << 50) 706 #define ETH_RSS_LEVEL_PMD_DEFAULT RTE_DEPRECATED(ETH_RSS_LEVEL_PMD_DEFAULT) RTE_ETH_RSS_LEVEL_PMD_DEFAULT 707 708 /** 709 * level 1, requests RSS to be performed on the outermost packet 710 * encapsulation level. 711 */ 712 #define RTE_ETH_RSS_LEVEL_OUTERMOST (UINT64_C(1) << 50) 713 #define ETH_RSS_LEVEL_OUTERMOST RTE_DEPRECATED(ETH_RSS_LEVEL_OUTERMOST) RTE_ETH_RSS_LEVEL_OUTERMOST 714 715 /** 716 * level 2, requests RSS to be performed on the specified inner packet 717 * encapsulation level, from outermost to innermost (lower to higher values). 718 */ 719 #define RTE_ETH_RSS_LEVEL_INNERMOST (UINT64_C(2) << 50) 720 #define RTE_ETH_RSS_LEVEL_MASK (UINT64_C(3) << 50) 721 722 #define ETH_RSS_LEVEL_INNERMOST RTE_DEPRECATED(ETH_RSS_LEVEL_INNERMOST) RTE_ETH_RSS_LEVEL_INNERMOST 723 #define ETH_RSS_LEVEL_MASK RTE_DEPRECATED(ETH_RSS_LEVEL_MASK) RTE_ETH_RSS_LEVEL_MASK 724 725 #define RTE_ETH_RSS_LEVEL(rss_hf) ((rss_hf & RTE_ETH_RSS_LEVEL_MASK) >> 50) 726 #define ETH_RSS_LEVEL(rss_hf) RTE_DEPRECATED(ETH_RSS_LEVEL(rss_hf)) RTE_ETH_RSS_LEVEL(rss_hf) 727 728 /** 729 * For input set change of hash filter, if SRC_ONLY and DST_ONLY of 730 * the same level are used simultaneously, it is the same case as 731 * none of them are added. 732 * 733 * @param rss_hf 734 * RSS types with SRC/DST_ONLY. 735 * @return 736 * RSS types. 737 */ 738 static inline uint64_t 739 rte_eth_rss_hf_refine(uint64_t rss_hf) 740 { 741 if ((rss_hf & RTE_ETH_RSS_L3_SRC_ONLY) && (rss_hf & RTE_ETH_RSS_L3_DST_ONLY)) 742 rss_hf &= ~(RTE_ETH_RSS_L3_SRC_ONLY | RTE_ETH_RSS_L3_DST_ONLY); 743 744 if ((rss_hf & RTE_ETH_RSS_L4_SRC_ONLY) && (rss_hf & RTE_ETH_RSS_L4_DST_ONLY)) 745 rss_hf &= ~(RTE_ETH_RSS_L4_SRC_ONLY | RTE_ETH_RSS_L4_DST_ONLY); 746 747 return rss_hf; 748 } 749 750 #define RTE_ETH_RSS_IPV6_PRE32 ( \ 751 RTE_ETH_RSS_IPV6 | \ 752 RTE_ETH_RSS_L3_PRE32) 753 #define ETH_RSS_IPV6_PRE32 RTE_DEPRECATED(ETH_RSS_IPV6_PRE32) RTE_ETH_RSS_IPV6_PRE32 754 755 #define RTE_ETH_RSS_IPV6_PRE40 ( \ 756 RTE_ETH_RSS_IPV6 | \ 757 RTE_ETH_RSS_L3_PRE40) 758 #define ETH_RSS_IPV6_PRE40 RTE_DEPRECATED(ETH_RSS_IPV6_PRE40) RTE_ETH_RSS_IPV6_PRE40 759 760 #define RTE_ETH_RSS_IPV6_PRE48 ( \ 761 RTE_ETH_RSS_IPV6 | \ 762 RTE_ETH_RSS_L3_PRE48) 763 #define ETH_RSS_IPV6_PRE48 RTE_DEPRECATED(ETH_RSS_IPV6_PRE48) RTE_ETH_RSS_IPV6_PRE48 764 765 #define RTE_ETH_RSS_IPV6_PRE56 ( \ 766 RTE_ETH_RSS_IPV6 | \ 767 RTE_ETH_RSS_L3_PRE56) 768 #define ETH_RSS_IPV6_PRE56 RTE_DEPRECATED(ETH_RSS_IPV6_PRE56) RTE_ETH_RSS_IPV6_PRE56 769 770 #define RTE_ETH_RSS_IPV6_PRE64 ( \ 771 RTE_ETH_RSS_IPV6 | \ 772 RTE_ETH_RSS_L3_PRE64) 773 #define ETH_RSS_IPV6_PRE64 RTE_DEPRECATED(ETH_RSS_IPV6_PRE64) RTE_ETH_RSS_IPV6_PRE64 774 775 #define RTE_ETH_RSS_IPV6_PRE96 ( \ 776 RTE_ETH_RSS_IPV6 | \ 777 RTE_ETH_RSS_L3_PRE96) 778 #define ETH_RSS_IPV6_PRE96 RTE_DEPRECATED(ETH_RSS_IPV6_PRE96) RTE_ETH_RSS_IPV6_PRE96 779 780 #define RTE_ETH_RSS_IPV6_PRE32_UDP ( \ 781 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 782 RTE_ETH_RSS_L3_PRE32) 783 #define ETH_RSS_IPV6_PRE32_UDP RTE_DEPRECATED(ETH_RSS_IPV6_PRE32_UDP) RTE_ETH_RSS_IPV6_PRE32_UDP 784 785 #define RTE_ETH_RSS_IPV6_PRE40_UDP ( \ 786 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 787 RTE_ETH_RSS_L3_PRE40) 788 #define ETH_RSS_IPV6_PRE40_UDP RTE_DEPRECATED(ETH_RSS_IPV6_PRE40_UDP) RTE_ETH_RSS_IPV6_PRE40_UDP 789 790 #define RTE_ETH_RSS_IPV6_PRE48_UDP ( \ 791 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 792 RTE_ETH_RSS_L3_PRE48) 793 #define ETH_RSS_IPV6_PRE48_UDP RTE_DEPRECATED(ETH_RSS_IPV6_PRE48_UDP) RTE_ETH_RSS_IPV6_PRE48_UDP 794 795 #define RTE_ETH_RSS_IPV6_PRE56_UDP ( \ 796 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 797 RTE_ETH_RSS_L3_PRE56) 798 #define ETH_RSS_IPV6_PRE56_UDP RTE_DEPRECATED(ETH_RSS_IPV6_PRE56_UDP) RTE_ETH_RSS_IPV6_PRE56_UDP 799 800 #define RTE_ETH_RSS_IPV6_PRE64_UDP ( \ 801 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 802 RTE_ETH_RSS_L3_PRE64) 803 #define ETH_RSS_IPV6_PRE64_UDP RTE_DEPRECATED(ETH_RSS_IPV6_PRE64_UDP) RTE_ETH_RSS_IPV6_PRE64_UDP 804 805 #define RTE_ETH_RSS_IPV6_PRE96_UDP ( \ 806 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 807 RTE_ETH_RSS_L3_PRE96) 808 #define ETH_RSS_IPV6_PRE96_UDP RTE_DEPRECATED(ETH_RSS_IPV6_PRE96_UDP) RTE_ETH_RSS_IPV6_PRE96_UDP 809 810 #define RTE_ETH_RSS_IPV6_PRE32_TCP ( \ 811 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 812 RTE_ETH_RSS_L3_PRE32) 813 #define ETH_RSS_IPV6_PRE32_TCP RTE_DEPRECATED(ETH_RSS_IPV6_PRE32_TCP) RTE_ETH_RSS_IPV6_PRE32_TCP 814 815 #define RTE_ETH_RSS_IPV6_PRE40_TCP ( \ 816 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 817 RTE_ETH_RSS_L3_PRE40) 818 #define ETH_RSS_IPV6_PRE40_TCP RTE_DEPRECATED(ETH_RSS_IPV6_PRE40_TCP) RTE_ETH_RSS_IPV6_PRE40_TCP 819 820 #define RTE_ETH_RSS_IPV6_PRE48_TCP ( \ 821 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 822 RTE_ETH_RSS_L3_PRE48) 823 #define ETH_RSS_IPV6_PRE48_TCP RTE_DEPRECATED(ETH_RSS_IPV6_PRE48_TCP) RTE_ETH_RSS_IPV6_PRE48_TCP 824 825 #define RTE_ETH_RSS_IPV6_PRE56_TCP ( \ 826 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 827 RTE_ETH_RSS_L3_PRE56) 828 #define ETH_RSS_IPV6_PRE56_TCP RTE_DEPRECATED(ETH_RSS_IPV6_PRE56_TCP) RTE_ETH_RSS_IPV6_PRE56_TCP 829 830 #define RTE_ETH_RSS_IPV6_PRE64_TCP ( \ 831 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 832 RTE_ETH_RSS_L3_PRE64) 833 #define ETH_RSS_IPV6_PRE64_TCP RTE_DEPRECATED(ETH_RSS_IPV6_PRE64_TCP) RTE_ETH_RSS_IPV6_PRE64_TCP 834 835 #define RTE_ETH_RSS_IPV6_PRE96_TCP ( \ 836 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 837 RTE_ETH_RSS_L3_PRE96) 838 #define ETH_RSS_IPV6_PRE96_TCP RTE_DEPRECATED(ETH_RSS_IPV6_PRE96_TCP) RTE_ETH_RSS_IPV6_PRE96_TCP 839 840 #define RTE_ETH_RSS_IPV6_PRE32_SCTP ( \ 841 RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ 842 RTE_ETH_RSS_L3_PRE32) 843 #define ETH_RSS_IPV6_PRE32_SCTP RTE_DEPRECATED(ETH_RSS_IPV6_PRE32_SCTP) RTE_ETH_RSS_IPV6_PRE32_SCTP 844 845 #define RTE_ETH_RSS_IPV6_PRE40_SCTP ( \ 846 RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ 847 RTE_ETH_RSS_L3_PRE40) 848 #define ETH_RSS_IPV6_PRE40_SCTP RTE_DEPRECATED(ETH_RSS_IPV6_PRE40_SCTP) RTE_ETH_RSS_IPV6_PRE40_SCTP 849 850 #define RTE_ETH_RSS_IPV6_PRE48_SCTP ( \ 851 RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ 852 RTE_ETH_RSS_L3_PRE48) 853 #define ETH_RSS_IPV6_PRE48_SCTP RTE_DEPRECATED(ETH_RSS_IPV6_PRE48_SCTP) RTE_ETH_RSS_IPV6_PRE48_SCTP 854 855 #define RTE_ETH_RSS_IPV6_PRE56_SCTP ( \ 856 RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ 857 RTE_ETH_RSS_L3_PRE56) 858 #define ETH_RSS_IPV6_PRE56_SCTP RTE_DEPRECATED(ETH_RSS_IPV6_PRE56_SCTP) RTE_ETH_RSS_IPV6_PRE56_SCTP 859 860 #define RTE_ETH_RSS_IPV6_PRE64_SCTP ( \ 861 RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ 862 RTE_ETH_RSS_L3_PRE64) 863 #define ETH_RSS_IPV6_PRE64_SCTP RTE_DEPRECATED(ETH_RSS_IPV6_PRE64_SCTP) RTE_ETH_RSS_IPV6_PRE64_SCTP 864 865 #define RTE_ETH_RSS_IPV6_PRE96_SCTP ( \ 866 RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ 867 RTE_ETH_RSS_L3_PRE96) 868 #define ETH_RSS_IPV6_PRE96_SCTP RTE_DEPRECATED(ETH_RSS_IPV6_PRE96_SCTP) RTE_ETH_RSS_IPV6_PRE96_SCTP 869 870 #define RTE_ETH_RSS_IP ( \ 871 RTE_ETH_RSS_IPV4 | \ 872 RTE_ETH_RSS_FRAG_IPV4 | \ 873 RTE_ETH_RSS_NONFRAG_IPV4_OTHER | \ 874 RTE_ETH_RSS_IPV6 | \ 875 RTE_ETH_RSS_FRAG_IPV6 | \ 876 RTE_ETH_RSS_NONFRAG_IPV6_OTHER | \ 877 RTE_ETH_RSS_IPV6_EX) 878 #define ETH_RSS_IP RTE_DEPRECATED(ETH_RSS_IP) RTE_ETH_RSS_IP 879 880 #define RTE_ETH_RSS_UDP ( \ 881 RTE_ETH_RSS_NONFRAG_IPV4_UDP | \ 882 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 883 RTE_ETH_RSS_IPV6_UDP_EX) 884 #define ETH_RSS_UDP RTE_DEPRECATED(ETH_RSS_UDP) RTE_ETH_RSS_UDP 885 886 #define RTE_ETH_RSS_TCP ( \ 887 RTE_ETH_RSS_NONFRAG_IPV4_TCP | \ 888 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 889 RTE_ETH_RSS_IPV6_TCP_EX) 890 #define ETH_RSS_TCP RTE_DEPRECATED(ETH_RSS_TCP) RTE_ETH_RSS_TCP 891 892 #define RTE_ETH_RSS_SCTP ( \ 893 RTE_ETH_RSS_NONFRAG_IPV4_SCTP | \ 894 RTE_ETH_RSS_NONFRAG_IPV6_SCTP) 895 #define ETH_RSS_SCTP RTE_DEPRECATED(ETH_RSS_SCTP) RTE_ETH_RSS_SCTP 896 897 #define RTE_ETH_RSS_TUNNEL ( \ 898 RTE_ETH_RSS_VXLAN | \ 899 RTE_ETH_RSS_GENEVE | \ 900 RTE_ETH_RSS_NVGRE) 901 #define ETH_RSS_TUNNEL RTE_DEPRECATED(ETH_RSS_TUNNEL) RTE_ETH_RSS_TUNNEL 902 903 #define RTE_ETH_RSS_VLAN ( \ 904 RTE_ETH_RSS_S_VLAN | \ 905 RTE_ETH_RSS_C_VLAN) 906 #define ETH_RSS_VLAN RTE_DEPRECATED(ETH_RSS_VLAN) RTE_ETH_RSS_VLAN 907 908 /** Mask of valid RSS hash protocols */ 909 #define RTE_ETH_RSS_PROTO_MASK ( \ 910 RTE_ETH_RSS_IPV4 | \ 911 RTE_ETH_RSS_FRAG_IPV4 | \ 912 RTE_ETH_RSS_NONFRAG_IPV4_TCP | \ 913 RTE_ETH_RSS_NONFRAG_IPV4_UDP | \ 914 RTE_ETH_RSS_NONFRAG_IPV4_SCTP | \ 915 RTE_ETH_RSS_NONFRAG_IPV4_OTHER | \ 916 RTE_ETH_RSS_IPV6 | \ 917 RTE_ETH_RSS_FRAG_IPV6 | \ 918 RTE_ETH_RSS_NONFRAG_IPV6_TCP | \ 919 RTE_ETH_RSS_NONFRAG_IPV6_UDP | \ 920 RTE_ETH_RSS_NONFRAG_IPV6_SCTP | \ 921 RTE_ETH_RSS_NONFRAG_IPV6_OTHER | \ 922 RTE_ETH_RSS_L2_PAYLOAD | \ 923 RTE_ETH_RSS_IPV6_EX | \ 924 RTE_ETH_RSS_IPV6_TCP_EX | \ 925 RTE_ETH_RSS_IPV6_UDP_EX | \ 926 RTE_ETH_RSS_PORT | \ 927 RTE_ETH_RSS_VXLAN | \ 928 RTE_ETH_RSS_GENEVE | \ 929 RTE_ETH_RSS_NVGRE | \ 930 RTE_ETH_RSS_MPLS) 931 #define ETH_RSS_PROTO_MASK RTE_DEPRECATED(ETH_RSS_PROTO_MASK) RTE_ETH_RSS_PROTO_MASK 932 933 /* 934 * Definitions used for redirection table entry size. 935 * Some RSS RETA sizes may not be supported by some drivers, check the 936 * documentation or the description of relevant functions for more details. 937 */ 938 #define RTE_ETH_RSS_RETA_SIZE_64 64 939 #define RTE_ETH_RSS_RETA_SIZE_128 128 940 #define RTE_ETH_RSS_RETA_SIZE_256 256 941 #define RTE_ETH_RSS_RETA_SIZE_512 512 942 #define RTE_ETH_RETA_GROUP_SIZE 64 943 944 #define ETH_RSS_RETA_SIZE_64 RTE_DEPRECATED(ETH_RSS_RETA_SIZE_64) RTE_ETH_RSS_RETA_SIZE_64 945 #define ETH_RSS_RETA_SIZE_128 RTE_DEPRECATED(ETH_RSS_RETA_SIZE_128) RTE_ETH_RSS_RETA_SIZE_128 946 #define ETH_RSS_RETA_SIZE_256 RTE_DEPRECATED(ETH_RSS_RETA_SIZE_256) RTE_ETH_RSS_RETA_SIZE_256 947 #define ETH_RSS_RETA_SIZE_512 RTE_DEPRECATED(ETH_RSS_RETA_SIZE_512) RTE_ETH_RSS_RETA_SIZE_512 948 #define RTE_RETA_GROUP_SIZE RTE_DEPRECATED(RTE_RETA_GROUP_SIZE) RTE_ETH_RETA_GROUP_SIZE 949 950 /**@{@name VMDq and DCB maximums */ 951 #define RTE_ETH_VMDQ_MAX_VLAN_FILTERS 64 /**< Maximum nb. of VMDq VLAN filters. */ 952 #define RTE_ETH_DCB_NUM_USER_PRIORITIES 8 /**< Maximum nb. of DCB priorities. */ 953 #define RTE_ETH_VMDQ_DCB_NUM_QUEUES 128 /**< Maximum nb. of VMDq DCB queues. */ 954 #define RTE_ETH_DCB_NUM_QUEUES 128 /**< Maximum nb. of DCB queues. */ 955 /**@}*/ 956 957 #define ETH_VMDQ_MAX_VLAN_FILTERS RTE_DEPRECATED(ETH_VMDQ_MAX_VLAN_FILTERS) RTE_ETH_VMDQ_MAX_VLAN_FILTERS 958 #define ETH_DCB_NUM_USER_PRIORITIES RTE_DEPRECATED(ETH_DCB_NUM_USER_PRIORITIES) RTE_ETH_DCB_NUM_USER_PRIORITIES 959 #define ETH_VMDQ_DCB_NUM_QUEUES RTE_DEPRECATED(ETH_VMDQ_DCB_NUM_QUEUES) RTE_ETH_VMDQ_DCB_NUM_QUEUES 960 #define ETH_DCB_NUM_QUEUES RTE_DEPRECATED(ETH_DCB_NUM_QUEUES) RTE_ETH_DCB_NUM_QUEUES 961 962 /**@{@name DCB capabilities */ 963 #define RTE_ETH_DCB_PG_SUPPORT RTE_BIT32(0) /**< Priority Group(ETS) support. */ 964 #define RTE_ETH_DCB_PFC_SUPPORT RTE_BIT32(1) /**< Priority Flow Control support. */ 965 /**@}*/ 966 967 #define ETH_DCB_PG_SUPPORT RTE_DEPRECATED(ETH_DCB_PG_SUPPORT) RTE_ETH_DCB_PG_SUPPORT 968 #define ETH_DCB_PFC_SUPPORT RTE_DEPRECATED(ETH_DCB_PFC_SUPPORT) RTE_ETH_DCB_PFC_SUPPORT 969 970 /**@{@name VLAN offload bits */ 971 #define RTE_ETH_VLAN_STRIP_OFFLOAD 0x0001 /**< VLAN Strip On/Off */ 972 #define RTE_ETH_VLAN_FILTER_OFFLOAD 0x0002 /**< VLAN Filter On/Off */ 973 #define RTE_ETH_VLAN_EXTEND_OFFLOAD 0x0004 /**< VLAN Extend On/Off */ 974 #define RTE_ETH_QINQ_STRIP_OFFLOAD 0x0008 /**< QINQ Strip On/Off */ 975 976 #define ETH_VLAN_STRIP_OFFLOAD RTE_DEPRECATED(ETH_VLAN_STRIP_OFFLOAD) RTE_ETH_VLAN_STRIP_OFFLOAD 977 #define ETH_VLAN_FILTER_OFFLOAD RTE_DEPRECATED(ETH_VLAN_FILTER_OFFLOAD) RTE_ETH_VLAN_FILTER_OFFLOAD 978 #define ETH_VLAN_EXTEND_OFFLOAD RTE_DEPRECATED(ETH_VLAN_EXTEND_OFFLOAD) RTE_ETH_VLAN_EXTEND_OFFLOAD 979 #define ETH_QINQ_STRIP_OFFLOAD RTE_DEPRECATED(ETH_QINQ_STRIP_OFFLOAD) RTE_ETH_QINQ_STRIP_OFFLOAD 980 981 #define RTE_ETH_VLAN_STRIP_MASK 0x0001 /**< VLAN Strip setting mask */ 982 #define RTE_ETH_VLAN_FILTER_MASK 0x0002 /**< VLAN Filter setting mask*/ 983 #define RTE_ETH_VLAN_EXTEND_MASK 0x0004 /**< VLAN Extend setting mask*/ 984 #define RTE_ETH_QINQ_STRIP_MASK 0x0008 /**< QINQ Strip setting mask */ 985 #define RTE_ETH_VLAN_ID_MAX 0x0FFF /**< VLAN ID is in lower 12 bits*/ 986 /**@}*/ 987 988 #define ETH_VLAN_STRIP_MASK RTE_DEPRECATED(ETH_VLAN_STRIP_MASK) RTE_ETH_VLAN_STRIP_MASK 989 #define ETH_VLAN_FILTER_MASK RTE_DEPRECATED(ETH_VLAN_FILTER_MASK) RTE_ETH_VLAN_FILTER_MASK 990 #define ETH_VLAN_EXTEND_MASK RTE_DEPRECATED(ETH_VLAN_EXTEND_MASK) RTE_ETH_VLAN_EXTEND_MASK 991 #define ETH_QINQ_STRIP_MASK RTE_DEPRECATED(ETH_QINQ_STRIP_MASK) RTE_ETH_QINQ_STRIP_MASK 992 #define ETH_VLAN_ID_MAX RTE_DEPRECATED(ETH_VLAN_ID_MAX) RTE_ETH_VLAN_ID_MAX 993 994 /* Definitions used for receive MAC address */ 995 #define RTE_ETH_NUM_RECEIVE_MAC_ADDR 128 /**< Maximum nb. of receive mac addr. */ 996 #define ETH_NUM_RECEIVE_MAC_ADDR RTE_DEPRECATED(ETH_NUM_RECEIVE_MAC_ADDR) RTE_ETH_NUM_RECEIVE_MAC_ADDR 997 998 /* Definitions used for unicast hash */ 999 #define RTE_ETH_VMDQ_NUM_UC_HASH_ARRAY 128 /**< Maximum nb. of UC hash array. */ 1000 #define ETH_VMDQ_NUM_UC_HASH_ARRAY RTE_DEPRECATED(ETH_VMDQ_NUM_UC_HASH_ARRAY) RTE_ETH_VMDQ_NUM_UC_HASH_ARRAY 1001 1002 /**@{@name VMDq Rx mode 1003 * @see rte_eth_vmdq_rx_conf.rx_mode 1004 */ 1005 /** Accept untagged packets. */ 1006 #define RTE_ETH_VMDQ_ACCEPT_UNTAG RTE_BIT32(0) 1007 /** Accept packets in multicast table. */ 1008 #define RTE_ETH_VMDQ_ACCEPT_HASH_MC RTE_BIT32(1) 1009 /** Accept packets in unicast table. */ 1010 #define RTE_ETH_VMDQ_ACCEPT_HASH_UC RTE_BIT32(2) 1011 /** Accept broadcast packets. */ 1012 #define RTE_ETH_VMDQ_ACCEPT_BROADCAST RTE_BIT32(3) 1013 /** Multicast promiscuous. */ 1014 #define RTE_ETH_VMDQ_ACCEPT_MULTICAST RTE_BIT32(4) 1015 /**@}*/ 1016 1017 #define ETH_VMDQ_ACCEPT_UNTAG RTE_DEPRECATED(ETH_VMDQ_ACCEPT_UNTAG) RTE_ETH_VMDQ_ACCEPT_UNTAG 1018 #define ETH_VMDQ_ACCEPT_HASH_MC RTE_DEPRECATED(ETH_VMDQ_ACCEPT_HASH_MC) RTE_ETH_VMDQ_ACCEPT_HASH_MC 1019 #define ETH_VMDQ_ACCEPT_HASH_UC RTE_DEPRECATED(ETH_VMDQ_ACCEPT_HASH_UC) RTE_ETH_VMDQ_ACCEPT_HASH_UC 1020 #define ETH_VMDQ_ACCEPT_BROADCAST RTE_DEPRECATED(ETH_VMDQ_ACCEPT_BROADCAST) RTE_ETH_VMDQ_ACCEPT_BROADCAST 1021 #define ETH_VMDQ_ACCEPT_MULTICAST RTE_DEPRECATED(ETH_VMDQ_ACCEPT_MULTICAST) RTE_ETH_VMDQ_ACCEPT_MULTICAST 1022 1023 /** 1024 * A structure used to configure 64 entries of Redirection Table of the 1025 * Receive Side Scaling (RSS) feature of an Ethernet port. To configure 1026 * more than 64 entries supported by hardware, an array of this structure 1027 * is needed. 1028 */ 1029 struct rte_eth_rss_reta_entry64 { 1030 /** Mask bits indicate which entries need to be updated/queried. */ 1031 uint64_t mask; 1032 /** Group of 64 redirection table entries. */ 1033 uint16_t reta[RTE_ETH_RETA_GROUP_SIZE]; 1034 }; 1035 1036 /** 1037 * This enum indicates the possible number of traffic classes 1038 * in DCB configurations 1039 */ 1040 enum rte_eth_nb_tcs { 1041 RTE_ETH_4_TCS = 4, /**< 4 TCs with DCB. */ 1042 RTE_ETH_8_TCS = 8 /**< 8 TCs with DCB. */ 1043 }; 1044 #define ETH_4_TCS RTE_DEPRECATED(ETH_4_TCS) RTE_ETH_4_TCS 1045 #define ETH_8_TCS RTE_DEPRECATED(ETH_8_TCS) RTE_ETH_8_TCS 1046 1047 /** 1048 * This enum indicates the possible number of queue pools 1049 * in VMDq configurations. 1050 */ 1051 enum rte_eth_nb_pools { 1052 RTE_ETH_8_POOLS = 8, /**< 8 VMDq pools. */ 1053 RTE_ETH_16_POOLS = 16, /**< 16 VMDq pools. */ 1054 RTE_ETH_32_POOLS = 32, /**< 32 VMDq pools. */ 1055 RTE_ETH_64_POOLS = 64 /**< 64 VMDq pools. */ 1056 }; 1057 #define ETH_8_POOLS RTE_DEPRECATED(ETH_8_POOLS) RTE_ETH_8_POOLS 1058 #define ETH_16_POOLS RTE_DEPRECATED(ETH_16_POOLS) RTE_ETH_16_POOLS 1059 #define ETH_32_POOLS RTE_DEPRECATED(ETH_32_POOLS) RTE_ETH_32_POOLS 1060 #define ETH_64_POOLS RTE_DEPRECATED(ETH_64_POOLS) RTE_ETH_64_POOLS 1061 1062 /* This structure may be extended in future. */ 1063 struct rte_eth_dcb_rx_conf { 1064 enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs */ 1065 /** Traffic class each UP mapped to. */ 1066 uint8_t dcb_tc[RTE_ETH_DCB_NUM_USER_PRIORITIES]; 1067 }; 1068 1069 struct rte_eth_vmdq_dcb_tx_conf { 1070 enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools. */ 1071 /** Traffic class each UP mapped to. */ 1072 uint8_t dcb_tc[RTE_ETH_DCB_NUM_USER_PRIORITIES]; 1073 }; 1074 1075 struct rte_eth_dcb_tx_conf { 1076 enum rte_eth_nb_tcs nb_tcs; /**< Possible DCB TCs, 4 or 8 TCs. */ 1077 /** Traffic class each UP mapped to. */ 1078 uint8_t dcb_tc[RTE_ETH_DCB_NUM_USER_PRIORITIES]; 1079 }; 1080 1081 struct rte_eth_vmdq_tx_conf { 1082 enum rte_eth_nb_pools nb_queue_pools; /**< VMDq mode, 64 pools. */ 1083 }; 1084 1085 /** 1086 * A structure used to configure the VMDq+DCB feature 1087 * of an Ethernet port. 1088 * 1089 * Using this feature, packets are routed to a pool of queues, based 1090 * on the VLAN ID in the VLAN tag, and then to a specific queue within 1091 * that pool, using the user priority VLAN tag field. 1092 * 1093 * A default pool may be used, if desired, to route all traffic which 1094 * does not match the VLAN filter rules. 1095 */ 1096 struct rte_eth_vmdq_dcb_conf { 1097 enum rte_eth_nb_pools nb_queue_pools; /**< With DCB, 16 or 32 pools */ 1098 uint8_t enable_default_pool; /**< If non-zero, use a default pool */ 1099 uint8_t default_pool; /**< The default pool, if applicable */ 1100 uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */ 1101 struct { 1102 uint16_t vlan_id; /**< The VLAN ID of the received frame */ 1103 uint64_t pools; /**< Bitmask of pools for packet Rx */ 1104 } pool_map[RTE_ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq VLAN pool maps. */ 1105 /** Selects a queue in a pool */ 1106 uint8_t dcb_tc[RTE_ETH_DCB_NUM_USER_PRIORITIES]; 1107 }; 1108 1109 /** 1110 * A structure used to configure the VMDq feature of an Ethernet port when 1111 * not combined with the DCB feature. 1112 * 1113 * Using this feature, packets are routed to a pool of queues. By default, 1114 * the pool selection is based on the MAC address, the VLAN ID in the 1115 * VLAN tag as specified in the pool_map array. 1116 * Passing the RTE_ETH_VMDQ_ACCEPT_UNTAG in the rx_mode field allows pool 1117 * selection using only the MAC address. MAC address to pool mapping is done 1118 * using the rte_eth_dev_mac_addr_add function, with the pool parameter 1119 * corresponding to the pool ID. 1120 * 1121 * Queue selection within the selected pool will be done using RSS when 1122 * it is enabled or revert to the first queue of the pool if not. 1123 * 1124 * A default pool may be used, if desired, to route all traffic which 1125 * does not match the VLAN filter rules or any pool MAC address. 1126 */ 1127 struct rte_eth_vmdq_rx_conf { 1128 enum rte_eth_nb_pools nb_queue_pools; /**< VMDq only mode, 8 or 64 pools */ 1129 uint8_t enable_default_pool; /**< If non-zero, use a default pool */ 1130 uint8_t default_pool; /**< The default pool, if applicable */ 1131 uint8_t enable_loop_back; /**< Enable VT loop back */ 1132 uint8_t nb_pool_maps; /**< We can have up to 64 filters/mappings */ 1133 uint32_t rx_mode; /**< Flags from ETH_VMDQ_ACCEPT_* */ 1134 struct { 1135 uint16_t vlan_id; /**< The VLAN ID of the received frame */ 1136 uint64_t pools; /**< Bitmask of pools for packet Rx */ 1137 } pool_map[RTE_ETH_VMDQ_MAX_VLAN_FILTERS]; /**< VMDq VLAN pool maps. */ 1138 }; 1139 1140 /** 1141 * A structure used to configure the Tx features of an Ethernet port. 1142 */ 1143 struct rte_eth_txmode { 1144 enum rte_eth_tx_mq_mode mq_mode; /**< Tx multi-queues mode. */ 1145 /** 1146 * Per-port Tx offloads to be set using RTE_ETH_TX_OFFLOAD_* flags. 1147 * Only offloads set on tx_offload_capa field on rte_eth_dev_info 1148 * structure are allowed to be set. 1149 */ 1150 uint64_t offloads; 1151 1152 uint16_t pvid; 1153 __extension__ 1154 uint8_t /** If set, reject sending out tagged pkts */ 1155 hw_vlan_reject_tagged : 1, 1156 /** If set, reject sending out untagged pkts */ 1157 hw_vlan_reject_untagged : 1, 1158 /** If set, enable port based VLAN insertion */ 1159 hw_vlan_insert_pvid : 1; 1160 1161 uint64_t reserved_64s[2]; /**< Reserved for future fields */ 1162 void *reserved_ptrs[2]; /**< Reserved for future fields */ 1163 }; 1164 1165 /** 1166 * @warning 1167 * @b EXPERIMENTAL: this structure may change without prior notice. 1168 * 1169 * A structure used to configure an Rx packet segment to split. 1170 * 1171 * If RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT flag is set in offloads field, 1172 * the PMD will split the received packets into multiple segments 1173 * according to the specification in the description array: 1174 * 1175 * - The first network buffer will be allocated from the memory pool, 1176 * specified in the first array element, the second buffer, from the 1177 * pool in the second element, and so on. 1178 * 1179 * - The offsets from the segment description elements specify 1180 * the data offset from the buffer beginning except the first mbuf. 1181 * The first segment offset is added with RTE_PKTMBUF_HEADROOM. 1182 * 1183 * - The lengths in the elements define the maximal data amount 1184 * being received to each segment. The receiving starts with filling 1185 * up the first mbuf data buffer up to specified length. If the 1186 * there are data remaining (packet is longer than buffer in the first 1187 * mbuf) the following data will be pushed to the next segment 1188 * up to its own length, and so on. 1189 * 1190 * - If the length in the segment description element is zero 1191 * the actual buffer size will be deduced from the appropriate 1192 * memory pool properties. 1193 * 1194 * - If there is not enough elements to describe the buffer for entire 1195 * packet of maximal length the following parameters will be used 1196 * for the all remaining segments: 1197 * - pool from the last valid element 1198 * - the buffer size from this pool 1199 * - zero offset 1200 */ 1201 struct rte_eth_rxseg_split { 1202 struct rte_mempool *mp; /**< Memory pool to allocate segment from. */ 1203 uint16_t length; /**< Segment data length, configures split point. */ 1204 uint16_t offset; /**< Data offset from beginning of mbuf data buffer. */ 1205 uint32_t reserved; /**< Reserved field. */ 1206 }; 1207 1208 /** 1209 * @warning 1210 * @b EXPERIMENTAL: this structure may change without prior notice. 1211 * 1212 * A common structure used to describe Rx packet segment properties. 1213 */ 1214 union rte_eth_rxseg { 1215 /* The settings for buffer split offload. */ 1216 struct rte_eth_rxseg_split split; 1217 /* The other features settings should be added here. */ 1218 }; 1219 1220 /** 1221 * A structure used to configure an Rx ring of an Ethernet port. 1222 */ 1223 struct rte_eth_rxconf { 1224 struct rte_eth_thresh rx_thresh; /**< Rx ring threshold registers. */ 1225 uint16_t rx_free_thresh; /**< Drives the freeing of Rx descriptors. */ 1226 uint8_t rx_drop_en; /**< Drop packets if no descriptors are available. */ 1227 uint8_t rx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */ 1228 uint16_t rx_nseg; /**< Number of descriptions in rx_seg array. */ 1229 /** 1230 * Share group index in Rx domain and switch domain. 1231 * Non-zero value to enable Rx queue share, zero value disable share. 1232 * PMD is responsible for Rx queue consistency checks to avoid member 1233 * port's configuration contradict to each other. 1234 */ 1235 uint16_t share_group; 1236 uint16_t share_qid; /**< Shared Rx queue ID in group */ 1237 /** 1238 * Per-queue Rx offloads to be set using RTE_ETH_RX_OFFLOAD_* flags. 1239 * Only offloads set on rx_queue_offload_capa or rx_offload_capa 1240 * fields on rte_eth_dev_info structure are allowed to be set. 1241 */ 1242 uint64_t offloads; 1243 /** 1244 * Points to the array of segment descriptions for an entire packet. 1245 * Array elements are properties for consecutive Rx segments. 1246 * 1247 * The supported capabilities of receiving segmentation is reported 1248 * in rte_eth_dev_info.rx_seg_capa field. 1249 */ 1250 union rte_eth_rxseg *rx_seg; 1251 1252 uint64_t reserved_64s[2]; /**< Reserved for future fields */ 1253 void *reserved_ptrs[2]; /**< Reserved for future fields */ 1254 }; 1255 1256 /** 1257 * A structure used to configure a Tx ring of an Ethernet port. 1258 */ 1259 struct rte_eth_txconf { 1260 struct rte_eth_thresh tx_thresh; /**< Tx ring threshold registers. */ 1261 uint16_t tx_rs_thresh; /**< Drives the setting of RS bit on TXDs. */ 1262 uint16_t tx_free_thresh; /**< Start freeing Tx buffers if there are 1263 less free descriptors than this value. */ 1264 1265 uint8_t tx_deferred_start; /**< Do not start queue with rte_eth_dev_start(). */ 1266 /** 1267 * Per-queue Tx offloads to be set using RTE_ETH_TX_OFFLOAD_* flags. 1268 * Only offloads set on tx_queue_offload_capa or tx_offload_capa 1269 * fields on rte_eth_dev_info structure are allowed to be set. 1270 */ 1271 uint64_t offloads; 1272 1273 uint64_t reserved_64s[2]; /**< Reserved for future fields */ 1274 void *reserved_ptrs[2]; /**< Reserved for future fields */ 1275 }; 1276 1277 /** 1278 * @warning 1279 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 1280 * 1281 * A structure used to return the hairpin capabilities that are supported. 1282 */ 1283 struct rte_eth_hairpin_cap { 1284 /** The max number of hairpin queues (different bindings). */ 1285 uint16_t max_nb_queues; 1286 /** Max number of Rx queues to be connected to one Tx queue. */ 1287 uint16_t max_rx_2_tx; 1288 /** Max number of Tx queues to be connected to one Rx queue. */ 1289 uint16_t max_tx_2_rx; 1290 uint16_t max_nb_desc; /**< The max num of descriptors. */ 1291 }; 1292 1293 #define RTE_ETH_MAX_HAIRPIN_PEERS 32 1294 1295 /** 1296 * @warning 1297 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 1298 * 1299 * A structure used to hold hairpin peer data. 1300 */ 1301 struct rte_eth_hairpin_peer { 1302 uint16_t port; /**< Peer port. */ 1303 uint16_t queue; /**< Peer queue. */ 1304 }; 1305 1306 /** 1307 * @warning 1308 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 1309 * 1310 * A structure used to configure hairpin binding. 1311 */ 1312 struct rte_eth_hairpin_conf { 1313 uint32_t peer_count:16; /**< The number of peers. */ 1314 1315 /** 1316 * Explicit Tx flow rule mode. 1317 * One hairpin pair of queues should have the same attribute. 1318 * 1319 * - When set, the user should be responsible for inserting the hairpin 1320 * Tx part flows and removing them. 1321 * - When clear, the PMD will try to handle the Tx part of the flows, 1322 * e.g., by splitting one flow into two parts. 1323 */ 1324 uint32_t tx_explicit:1; 1325 1326 /** 1327 * Manually bind hairpin queues. 1328 * One hairpin pair of queues should have the same attribute. 1329 * 1330 * - When set, to enable hairpin, the user should call the hairpin bind 1331 * function after all the queues are set up properly and the ports are 1332 * started. Also, the hairpin unbind function should be called 1333 * accordingly before stopping a port that with hairpin configured. 1334 * - When clear, the PMD will try to enable the hairpin with the queues 1335 * configured automatically during port start. 1336 */ 1337 uint32_t manual_bind:1; 1338 uint32_t reserved:14; /**< Reserved bits. */ 1339 struct rte_eth_hairpin_peer peers[RTE_ETH_MAX_HAIRPIN_PEERS]; 1340 }; 1341 1342 /** 1343 * A structure contains information about HW descriptor ring limitations. 1344 */ 1345 struct rte_eth_desc_lim { 1346 uint16_t nb_max; /**< Max allowed number of descriptors. */ 1347 uint16_t nb_min; /**< Min allowed number of descriptors. */ 1348 uint16_t nb_align; /**< Number of descriptors should be aligned to. */ 1349 1350 /** 1351 * Max allowed number of segments per whole packet. 1352 * 1353 * - For TSO packet this is the total number of data descriptors allowed 1354 * by device. 1355 * 1356 * @see nb_mtu_seg_max 1357 */ 1358 uint16_t nb_seg_max; 1359 1360 /** 1361 * Max number of segments per one MTU. 1362 * 1363 * - For non-TSO packet, this is the maximum allowed number of segments 1364 * in a single transmit packet. 1365 * 1366 * - For TSO packet each segment within the TSO may span up to this 1367 * value. 1368 * 1369 * @see nb_seg_max 1370 */ 1371 uint16_t nb_mtu_seg_max; 1372 }; 1373 1374 /** 1375 * This enum indicates the flow control mode 1376 */ 1377 enum rte_eth_fc_mode { 1378 RTE_ETH_FC_NONE = 0, /**< Disable flow control. */ 1379 RTE_ETH_FC_RX_PAUSE, /**< Rx pause frame, enable flowctrl on Tx side. */ 1380 RTE_ETH_FC_TX_PAUSE, /**< Tx pause frame, enable flowctrl on Rx side. */ 1381 RTE_ETH_FC_FULL /**< Enable flow control on both side. */ 1382 }; 1383 #define RTE_FC_NONE RTE_DEPRECATED(RTE_FC_NONE) RTE_ETH_FC_NONE 1384 #define RTE_FC_RX_PAUSE RTE_DEPRECATED(RTE_FC_RX_PAUSE) RTE_ETH_FC_RX_PAUSE 1385 #define RTE_FC_TX_PAUSE RTE_DEPRECATED(RTE_FC_TX_PAUSE) RTE_ETH_FC_TX_PAUSE 1386 #define RTE_FC_FULL RTE_DEPRECATED(RTE_FC_FULL) RTE_ETH_FC_FULL 1387 1388 /** 1389 * A structure used to configure Ethernet flow control parameter. 1390 * These parameters will be configured into the register of the NIC. 1391 * Please refer to the corresponding data sheet for proper value. 1392 */ 1393 struct rte_eth_fc_conf { 1394 uint32_t high_water; /**< High threshold value to trigger XOFF */ 1395 uint32_t low_water; /**< Low threshold value to trigger XON */ 1396 uint16_t pause_time; /**< Pause quota in the Pause frame */ 1397 uint16_t send_xon; /**< Is XON frame need be sent */ 1398 enum rte_eth_fc_mode mode; /**< Link flow control mode */ 1399 uint8_t mac_ctrl_frame_fwd; /**< Forward MAC control frames */ 1400 uint8_t autoneg; /**< Use Pause autoneg */ 1401 }; 1402 1403 /** 1404 * A structure used to configure Ethernet priority flow control parameter. 1405 * These parameters will be configured into the register of the NIC. 1406 * Please refer to the corresponding data sheet for proper value. 1407 */ 1408 struct rte_eth_pfc_conf { 1409 struct rte_eth_fc_conf fc; /**< General flow control parameter. */ 1410 uint8_t priority; /**< VLAN User Priority. */ 1411 }; 1412 1413 /** 1414 * @warning 1415 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 1416 * 1417 * A structure used to retrieve information of queue based PFC. 1418 */ 1419 struct rte_eth_pfc_queue_info { 1420 /** 1421 * Maximum supported traffic class as per PFC (802.1Qbb) specification. 1422 */ 1423 uint8_t tc_max; 1424 /** PFC queue mode capabilities. */ 1425 enum rte_eth_fc_mode mode_capa; 1426 }; 1427 1428 /** 1429 * @warning 1430 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 1431 * 1432 * A structure used to configure Ethernet priority flow control parameters for 1433 * ethdev queues. 1434 * 1435 * rte_eth_pfc_queue_conf::rx_pause structure shall be used to configure given 1436 * tx_qid with corresponding tc. When ethdev device receives PFC frame with 1437 * rte_eth_pfc_queue_conf::rx_pause::tc, traffic will be paused on 1438 * rte_eth_pfc_queue_conf::rx_pause::tx_qid for that tc. 1439 * 1440 * rte_eth_pfc_queue_conf::tx_pause structure shall be used to configure given 1441 * rx_qid. When rx_qid is congested, PFC frames are generated with 1442 * rte_eth_pfc_queue_conf::rx_pause::tc and 1443 * rte_eth_pfc_queue_conf::rx_pause::pause_time to the peer. 1444 */ 1445 struct rte_eth_pfc_queue_conf { 1446 enum rte_eth_fc_mode mode; /**< Link flow control mode */ 1447 1448 struct { 1449 uint16_t tx_qid; /**< Tx queue ID */ 1450 /** Traffic class as per PFC (802.1Qbb) spec. The value must be 1451 * in the range [0, rte_eth_pfc_queue_info::tx_max - 1] 1452 */ 1453 uint8_t tc; 1454 } rx_pause; /* Valid when (mode == FC_RX_PAUSE || mode == FC_FULL) */ 1455 1456 struct { 1457 uint16_t pause_time; /**< Pause quota in the Pause frame */ 1458 uint16_t rx_qid; /**< Rx queue ID */ 1459 /** Traffic class as per PFC (802.1Qbb) spec. The value must be 1460 * in the range [0, rte_eth_pfc_queue_info::tx_max - 1] 1461 */ 1462 uint8_t tc; 1463 } tx_pause; /* Valid when (mode == FC_TX_PAUSE || mode == FC_FULL) */ 1464 }; 1465 1466 /** 1467 * Tunnel type for device-specific classifier configuration. 1468 * @see rte_eth_udp_tunnel 1469 */ 1470 enum rte_eth_tunnel_type { 1471 RTE_ETH_TUNNEL_TYPE_NONE = 0, 1472 RTE_ETH_TUNNEL_TYPE_VXLAN, 1473 RTE_ETH_TUNNEL_TYPE_GENEVE, 1474 RTE_ETH_TUNNEL_TYPE_TEREDO, 1475 RTE_ETH_TUNNEL_TYPE_NVGRE, 1476 RTE_ETH_TUNNEL_TYPE_IP_IN_GRE, 1477 RTE_ETH_L2_TUNNEL_TYPE_E_TAG, 1478 RTE_ETH_TUNNEL_TYPE_VXLAN_GPE, 1479 RTE_ETH_TUNNEL_TYPE_ECPRI, 1480 RTE_ETH_TUNNEL_TYPE_MAX, 1481 }; 1482 #define RTE_TUNNEL_TYPE_NONE RTE_DEPRECATED(RTE_TUNNEL_TYPE_NONE) RTE_ETH_TUNNEL_TYPE_NONE 1483 #define RTE_TUNNEL_TYPE_VXLAN RTE_DEPRECATED(RTE_TUNNEL_TYPE_VXLAN) RTE_ETH_TUNNEL_TYPE_VXLAN 1484 #define RTE_TUNNEL_TYPE_GENEVE RTE_DEPRECATED(RTE_TUNNEL_TYPE_GENEVE) RTE_ETH_TUNNEL_TYPE_GENEVE 1485 #define RTE_TUNNEL_TYPE_TEREDO RTE_DEPRECATED(RTE_TUNNEL_TYPE_TEREDO) RTE_ETH_TUNNEL_TYPE_TEREDO 1486 #define RTE_TUNNEL_TYPE_NVGRE RTE_DEPRECATED(RTE_TUNNEL_TYPE_NVGRE) RTE_ETH_TUNNEL_TYPE_NVGRE 1487 #define RTE_TUNNEL_TYPE_IP_IN_GRE RTE_DEPRECATED(RTE_TUNNEL_TYPE_IP_IN_GRE) RTE_ETH_TUNNEL_TYPE_IP_IN_GRE 1488 #define RTE_L2_TUNNEL_TYPE_E_TAG RTE_DEPRECATED(RTE_L2_TUNNEL_TYPE_E_TAG) RTE_ETH_L2_TUNNEL_TYPE_E_TAG 1489 #define RTE_TUNNEL_TYPE_VXLAN_GPE RTE_DEPRECATED(RTE_TUNNEL_TYPE_VXLAN_GPE) RTE_ETH_TUNNEL_TYPE_VXLAN_GPE 1490 #define RTE_TUNNEL_TYPE_ECPRI RTE_DEPRECATED(RTE_TUNNEL_TYPE_ECPRI) RTE_ETH_TUNNEL_TYPE_ECPRI 1491 #define RTE_TUNNEL_TYPE_MAX RTE_DEPRECATED(RTE_TUNNEL_TYPE_MAX) RTE_ETH_TUNNEL_TYPE_MAX 1492 1493 /* Deprecated API file for rte_eth_dev_filter_* functions */ 1494 #include "rte_eth_ctrl.h" 1495 1496 /** 1497 * Memory space that can be configured to store Flow Director filters 1498 * in the board memory. 1499 */ 1500 enum rte_eth_fdir_pballoc_type { 1501 RTE_ETH_FDIR_PBALLOC_64K = 0, /**< 64k. */ 1502 RTE_ETH_FDIR_PBALLOC_128K, /**< 128k. */ 1503 RTE_ETH_FDIR_PBALLOC_256K, /**< 256k. */ 1504 }; 1505 #define rte_fdir_pballoc_type rte_eth_fdir_pballoc_type 1506 1507 #define RTE_FDIR_PBALLOC_64K RTE_DEPRECATED(RTE_FDIR_PBALLOC_64K) RTE_ETH_FDIR_PBALLOC_64K 1508 #define RTE_FDIR_PBALLOC_128K RTE_DEPRECATED(RTE_FDIR_PBALLOC_128K) RTE_ETH_FDIR_PBALLOC_128K 1509 #define RTE_FDIR_PBALLOC_256K RTE_DEPRECATED(RTE_FDIR_PBALLOC_256K) RTE_ETH_FDIR_PBALLOC_256K 1510 1511 /** 1512 * Select report mode of FDIR hash information in Rx descriptors. 1513 */ 1514 enum rte_fdir_status_mode { 1515 RTE_FDIR_NO_REPORT_STATUS = 0, /**< Never report FDIR hash. */ 1516 RTE_FDIR_REPORT_STATUS, /**< Only report FDIR hash for matching pkts. */ 1517 RTE_FDIR_REPORT_STATUS_ALWAYS, /**< Always report FDIR hash. */ 1518 }; 1519 1520 /** 1521 * A structure used to configure the Flow Director (FDIR) feature 1522 * of an Ethernet port. 1523 * 1524 * If mode is RTE_FDIR_MODE_NONE, the pballoc value is ignored. 1525 */ 1526 struct rte_eth_fdir_conf { 1527 enum rte_fdir_mode mode; /**< Flow Director mode. */ 1528 enum rte_eth_fdir_pballoc_type pballoc; /**< Space for FDIR filters. */ 1529 enum rte_fdir_status_mode status; /**< How to report FDIR hash. */ 1530 /** Rx queue of packets matching a "drop" filter in perfect mode. */ 1531 uint8_t drop_queue; 1532 struct rte_eth_fdir_masks mask; 1533 /** Flex payload configuration. */ 1534 struct rte_eth_fdir_flex_conf flex_conf; 1535 }; 1536 #define rte_fdir_conf rte_eth_fdir_conf 1537 1538 /** 1539 * UDP tunneling configuration. 1540 * 1541 * Used to configure the classifier of a device, 1542 * associating an UDP port with a type of tunnel. 1543 * 1544 * Some NICs may need such configuration to properly parse a tunnel 1545 * with any standard or custom UDP port. 1546 */ 1547 struct rte_eth_udp_tunnel { 1548 uint16_t udp_port; /**< UDP port used for the tunnel. */ 1549 uint8_t prot_type; /**< Tunnel type. @see rte_eth_tunnel_type */ 1550 }; 1551 1552 /** 1553 * A structure used to enable/disable specific device interrupts. 1554 */ 1555 struct rte_eth_intr_conf { 1556 /** enable/disable lsc interrupt. 0 (default) - disable, 1 enable */ 1557 uint32_t lsc:1; 1558 /** enable/disable rxq interrupt. 0 (default) - disable, 1 enable */ 1559 uint32_t rxq:1; 1560 /** enable/disable rmv interrupt. 0 (default) - disable, 1 enable */ 1561 uint32_t rmv:1; 1562 }; 1563 1564 #define rte_intr_conf rte_eth_intr_conf 1565 1566 /** 1567 * A structure used to configure an Ethernet port. 1568 * Depending upon the Rx multi-queue mode, extra advanced 1569 * configuration settings may be needed. 1570 */ 1571 struct rte_eth_conf { 1572 uint32_t link_speeds; /**< bitmap of RTE_ETH_LINK_SPEED_XXX of speeds to be 1573 used. RTE_ETH_LINK_SPEED_FIXED disables link 1574 autonegotiation, and a unique speed shall be 1575 set. Otherwise, the bitmap defines the set of 1576 speeds to be advertised. If the special value 1577 RTE_ETH_LINK_SPEED_AUTONEG (0) is used, all speeds 1578 supported are advertised. */ 1579 struct rte_eth_rxmode rxmode; /**< Port Rx configuration. */ 1580 struct rte_eth_txmode txmode; /**< Port Tx configuration. */ 1581 uint32_t lpbk_mode; /**< Loopback operation mode. By default the value 1582 is 0, meaning the loopback mode is disabled. 1583 Read the datasheet of given Ethernet controller 1584 for details. The possible values of this field 1585 are defined in implementation of each driver. */ 1586 struct { 1587 struct rte_eth_rss_conf rss_conf; /**< Port RSS configuration */ 1588 /** Port VMDq+DCB configuration. */ 1589 struct rte_eth_vmdq_dcb_conf vmdq_dcb_conf; 1590 /** Port DCB Rx configuration. */ 1591 struct rte_eth_dcb_rx_conf dcb_rx_conf; 1592 /** Port VMDq Rx configuration. */ 1593 struct rte_eth_vmdq_rx_conf vmdq_rx_conf; 1594 } rx_adv_conf; /**< Port Rx filtering configuration. */ 1595 union { 1596 /** Port VMDq+DCB Tx configuration. */ 1597 struct rte_eth_vmdq_dcb_tx_conf vmdq_dcb_tx_conf; 1598 /** Port DCB Tx configuration. */ 1599 struct rte_eth_dcb_tx_conf dcb_tx_conf; 1600 /** Port VMDq Tx configuration. */ 1601 struct rte_eth_vmdq_tx_conf vmdq_tx_conf; 1602 } tx_adv_conf; /**< Port Tx DCB configuration (union). */ 1603 /** Currently,Priority Flow Control(PFC) are supported,if DCB with PFC 1604 is needed,and the variable must be set RTE_ETH_DCB_PFC_SUPPORT. */ 1605 uint32_t dcb_capability_en; 1606 struct rte_eth_fdir_conf fdir_conf; /**< FDIR configuration. DEPRECATED */ 1607 struct rte_eth_intr_conf intr_conf; /**< Interrupt mode configuration. */ 1608 }; 1609 1610 /** 1611 * Rx offload capabilities of a device. 1612 */ 1613 #define RTE_ETH_RX_OFFLOAD_VLAN_STRIP RTE_BIT64(0) 1614 #define RTE_ETH_RX_OFFLOAD_IPV4_CKSUM RTE_BIT64(1) 1615 #define RTE_ETH_RX_OFFLOAD_UDP_CKSUM RTE_BIT64(2) 1616 #define RTE_ETH_RX_OFFLOAD_TCP_CKSUM RTE_BIT64(3) 1617 #define RTE_ETH_RX_OFFLOAD_TCP_LRO RTE_BIT64(4) 1618 #define RTE_ETH_RX_OFFLOAD_QINQ_STRIP RTE_BIT64(5) 1619 #define RTE_ETH_RX_OFFLOAD_OUTER_IPV4_CKSUM RTE_BIT64(6) 1620 #define RTE_ETH_RX_OFFLOAD_MACSEC_STRIP RTE_BIT64(7) 1621 #define RTE_ETH_RX_OFFLOAD_HEADER_SPLIT RTE_BIT64(8) 1622 #define RTE_ETH_RX_OFFLOAD_VLAN_FILTER RTE_BIT64(9) 1623 #define RTE_ETH_RX_OFFLOAD_VLAN_EXTEND RTE_BIT64(10) 1624 #define RTE_ETH_RX_OFFLOAD_SCATTER RTE_BIT64(13) 1625 /** 1626 * Timestamp is set by the driver in RTE_MBUF_DYNFIELD_TIMESTAMP_NAME 1627 * and RTE_MBUF_DYNFLAG_RX_TIMESTAMP_NAME is set in ol_flags. 1628 * The mbuf field and flag are registered when the offload is configured. 1629 */ 1630 #define RTE_ETH_RX_OFFLOAD_TIMESTAMP RTE_BIT64(14) 1631 #define RTE_ETH_RX_OFFLOAD_SECURITY RTE_BIT64(15) 1632 #define RTE_ETH_RX_OFFLOAD_KEEP_CRC RTE_BIT64(16) 1633 #define RTE_ETH_RX_OFFLOAD_SCTP_CKSUM RTE_BIT64(17) 1634 #define RTE_ETH_RX_OFFLOAD_OUTER_UDP_CKSUM RTE_BIT64(18) 1635 #define RTE_ETH_RX_OFFLOAD_RSS_HASH RTE_BIT64(19) 1636 #define RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT RTE_BIT64(20) 1637 1638 #define DEV_RX_OFFLOAD_VLAN_STRIP RTE_DEPRECATED(DEV_RX_OFFLOAD_VLAN_STRIP) RTE_ETH_RX_OFFLOAD_VLAN_STRIP 1639 #define DEV_RX_OFFLOAD_IPV4_CKSUM RTE_DEPRECATED(DEV_RX_OFFLOAD_IPV4_CKSUM) RTE_ETH_RX_OFFLOAD_IPV4_CKSUM 1640 #define DEV_RX_OFFLOAD_UDP_CKSUM RTE_DEPRECATED(DEV_RX_OFFLOAD_UDP_CKSUM) RTE_ETH_RX_OFFLOAD_UDP_CKSUM 1641 #define DEV_RX_OFFLOAD_TCP_CKSUM RTE_DEPRECATED(DEV_RX_OFFLOAD_TCP_CKSUM) RTE_ETH_RX_OFFLOAD_TCP_CKSUM 1642 #define DEV_RX_OFFLOAD_TCP_LRO RTE_DEPRECATED(DEV_RX_OFFLOAD_TCP_LRO) RTE_ETH_RX_OFFLOAD_TCP_LRO 1643 #define DEV_RX_OFFLOAD_QINQ_STRIP RTE_DEPRECATED(DEV_RX_OFFLOAD_QINQ_STRIP) RTE_ETH_RX_OFFLOAD_QINQ_STRIP 1644 #define DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM RTE_DEPRECATED(DEV_RX_OFFLOAD_OUTER_IPV4_CKSUM) RTE_ETH_RX_OFFLOAD_OUTER_IPV4_CKSUM 1645 #define DEV_RX_OFFLOAD_MACSEC_STRIP RTE_DEPRECATED(DEV_RX_OFFLOAD_MACSEC_STRIP) RTE_ETH_RX_OFFLOAD_MACSEC_STRIP 1646 #define DEV_RX_OFFLOAD_HEADER_SPLIT RTE_DEPRECATED(DEV_RX_OFFLOAD_HEADER_SPLIT) RTE_ETH_RX_OFFLOAD_HEADER_SPLIT 1647 #define DEV_RX_OFFLOAD_VLAN_FILTER RTE_DEPRECATED(DEV_RX_OFFLOAD_VLAN_FILTER) RTE_ETH_RX_OFFLOAD_VLAN_FILTER 1648 #define DEV_RX_OFFLOAD_VLAN_EXTEND RTE_DEPRECATED(DEV_RX_OFFLOAD_VLAN_EXTEND) RTE_ETH_RX_OFFLOAD_VLAN_EXTEND 1649 #define DEV_RX_OFFLOAD_SCATTER RTE_DEPRECATED(DEV_RX_OFFLOAD_SCATTER) RTE_ETH_RX_OFFLOAD_SCATTER 1650 #define DEV_RX_OFFLOAD_TIMESTAMP RTE_DEPRECATED(DEV_RX_OFFLOAD_TIMESTAMP) RTE_ETH_RX_OFFLOAD_TIMESTAMP 1651 #define DEV_RX_OFFLOAD_SECURITY RTE_DEPRECATED(DEV_RX_OFFLOAD_SECURITY) RTE_ETH_RX_OFFLOAD_SECURITY 1652 #define DEV_RX_OFFLOAD_KEEP_CRC RTE_DEPRECATED(DEV_RX_OFFLOAD_KEEP_CRC) RTE_ETH_RX_OFFLOAD_KEEP_CRC 1653 #define DEV_RX_OFFLOAD_SCTP_CKSUM RTE_DEPRECATED(DEV_RX_OFFLOAD_SCTP_CKSUM) RTE_ETH_RX_OFFLOAD_SCTP_CKSUM 1654 #define DEV_RX_OFFLOAD_OUTER_UDP_CKSUM RTE_DEPRECATED(DEV_RX_OFFLOAD_OUTER_UDP_CKSUM) RTE_ETH_RX_OFFLOAD_OUTER_UDP_CKSUM 1655 #define DEV_RX_OFFLOAD_RSS_HASH RTE_DEPRECATED(DEV_RX_OFFLOAD_RSS_HASH) RTE_ETH_RX_OFFLOAD_RSS_HASH 1656 1657 #define RTE_ETH_RX_OFFLOAD_CHECKSUM (RTE_ETH_RX_OFFLOAD_IPV4_CKSUM | \ 1658 RTE_ETH_RX_OFFLOAD_UDP_CKSUM | \ 1659 RTE_ETH_RX_OFFLOAD_TCP_CKSUM) 1660 #define DEV_RX_OFFLOAD_CHECKSUM RTE_DEPRECATED(DEV_RX_OFFLOAD_CHECKSUM) RTE_ETH_RX_OFFLOAD_CHECKSUM 1661 #define RTE_ETH_RX_OFFLOAD_VLAN (RTE_ETH_RX_OFFLOAD_VLAN_STRIP | \ 1662 RTE_ETH_RX_OFFLOAD_VLAN_FILTER | \ 1663 RTE_ETH_RX_OFFLOAD_VLAN_EXTEND | \ 1664 RTE_ETH_RX_OFFLOAD_QINQ_STRIP) 1665 #define DEV_RX_OFFLOAD_VLAN RTE_DEPRECATED(DEV_RX_OFFLOAD_VLAN) RTE_ETH_RX_OFFLOAD_VLAN 1666 1667 /* 1668 * If new Rx offload capabilities are defined, they also must be 1669 * mentioned in rte_rx_offload_names in rte_ethdev.c file. 1670 */ 1671 1672 /** 1673 * Tx offload capabilities of a device. 1674 */ 1675 #define RTE_ETH_TX_OFFLOAD_VLAN_INSERT RTE_BIT64(0) 1676 #define RTE_ETH_TX_OFFLOAD_IPV4_CKSUM RTE_BIT64(1) 1677 #define RTE_ETH_TX_OFFLOAD_UDP_CKSUM RTE_BIT64(2) 1678 #define RTE_ETH_TX_OFFLOAD_TCP_CKSUM RTE_BIT64(3) 1679 #define RTE_ETH_TX_OFFLOAD_SCTP_CKSUM RTE_BIT64(4) 1680 #define RTE_ETH_TX_OFFLOAD_TCP_TSO RTE_BIT64(5) 1681 #define RTE_ETH_TX_OFFLOAD_UDP_TSO RTE_BIT64(6) 1682 #define RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM RTE_BIT64(7) /**< Used for tunneling packet. */ 1683 #define RTE_ETH_TX_OFFLOAD_QINQ_INSERT RTE_BIT64(8) 1684 #define RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO RTE_BIT64(9) /**< Used for tunneling packet. */ 1685 #define RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO RTE_BIT64(10) /**< Used for tunneling packet. */ 1686 #define RTE_ETH_TX_OFFLOAD_IPIP_TNL_TSO RTE_BIT64(11) /**< Used for tunneling packet. */ 1687 #define RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO RTE_BIT64(12) /**< Used for tunneling packet. */ 1688 #define RTE_ETH_TX_OFFLOAD_MACSEC_INSERT RTE_BIT64(13) 1689 /** 1690 * Multiple threads can invoke rte_eth_tx_burst() concurrently on the same 1691 * Tx queue without SW lock. 1692 */ 1693 #define RTE_ETH_TX_OFFLOAD_MT_LOCKFREE RTE_BIT64(14) 1694 /** Device supports multi segment send. */ 1695 #define RTE_ETH_TX_OFFLOAD_MULTI_SEGS RTE_BIT64(15) 1696 /** 1697 * Device supports optimization for fast release of mbufs. 1698 * When set application must guarantee that per-queue all mbufs comes from 1699 * the same mempool and has refcnt = 1. 1700 */ 1701 #define RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE RTE_BIT64(16) 1702 #define RTE_ETH_TX_OFFLOAD_SECURITY RTE_BIT64(17) 1703 /** 1704 * Device supports generic UDP tunneled packet TSO. 1705 * Application must set RTE_MBUF_F_TX_TUNNEL_UDP and other mbuf fields required 1706 * for tunnel TSO. 1707 */ 1708 #define RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO RTE_BIT64(18) 1709 /** 1710 * Device supports generic IP tunneled packet TSO. 1711 * Application must set RTE_MBUF_F_TX_TUNNEL_IP and other mbuf fields required 1712 * for tunnel TSO. 1713 */ 1714 #define RTE_ETH_TX_OFFLOAD_IP_TNL_TSO RTE_BIT64(19) 1715 /** Device supports outer UDP checksum */ 1716 #define RTE_ETH_TX_OFFLOAD_OUTER_UDP_CKSUM RTE_BIT64(20) 1717 /** 1718 * Device sends on time read from RTE_MBUF_DYNFIELD_TIMESTAMP_NAME 1719 * if RTE_MBUF_DYNFLAG_TX_TIMESTAMP_NAME is set in ol_flags. 1720 * The mbuf field and flag are registered when the offload is configured. 1721 */ 1722 #define RTE_ETH_TX_OFFLOAD_SEND_ON_TIMESTAMP RTE_BIT64(21) 1723 /* 1724 * If new Tx offload capabilities are defined, they also must be 1725 * mentioned in rte_tx_offload_names in rte_ethdev.c file. 1726 */ 1727 1728 #define DEV_TX_OFFLOAD_VLAN_INSERT RTE_DEPRECATED(DEV_TX_OFFLOAD_VLAN_INSERT) RTE_ETH_TX_OFFLOAD_VLAN_INSERT 1729 #define DEV_TX_OFFLOAD_IPV4_CKSUM RTE_DEPRECATED(DEV_TX_OFFLOAD_IPV4_CKSUM) RTE_ETH_TX_OFFLOAD_IPV4_CKSUM 1730 #define DEV_TX_OFFLOAD_UDP_CKSUM RTE_DEPRECATED(DEV_TX_OFFLOAD_UDP_CKSUM) RTE_ETH_TX_OFFLOAD_UDP_CKSUM 1731 #define DEV_TX_OFFLOAD_TCP_CKSUM RTE_DEPRECATED(DEV_TX_OFFLOAD_TCP_CKSUM) RTE_ETH_TX_OFFLOAD_TCP_CKSUM 1732 #define DEV_TX_OFFLOAD_SCTP_CKSUM RTE_DEPRECATED(DEV_TX_OFFLOAD_SCTP_CKSUM) RTE_ETH_TX_OFFLOAD_SCTP_CKSUM 1733 #define DEV_TX_OFFLOAD_TCP_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_TCP_TSO) RTE_ETH_TX_OFFLOAD_TCP_TSO 1734 #define DEV_TX_OFFLOAD_UDP_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_UDP_TSO) RTE_ETH_TX_OFFLOAD_UDP_TSO 1735 #define DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM RTE_DEPRECATED(DEV_TX_OFFLOAD_OUTER_IPV4_CKSUM) RTE_ETH_TX_OFFLOAD_OUTER_IPV4_CKSUM 1736 #define DEV_TX_OFFLOAD_QINQ_INSERT RTE_DEPRECATED(DEV_TX_OFFLOAD_QINQ_INSERT) RTE_ETH_TX_OFFLOAD_QINQ_INSERT 1737 #define DEV_TX_OFFLOAD_VXLAN_TNL_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_VXLAN_TNL_TSO) RTE_ETH_TX_OFFLOAD_VXLAN_TNL_TSO 1738 #define DEV_TX_OFFLOAD_GRE_TNL_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_GRE_TNL_TSO) RTE_ETH_TX_OFFLOAD_GRE_TNL_TSO 1739 #define DEV_TX_OFFLOAD_IPIP_TNL_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_IPIP_TNL_TSO) RTE_ETH_TX_OFFLOAD_IPIP_TNL_TSO 1740 #define DEV_TX_OFFLOAD_GENEVE_TNL_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_GENEVE_TNL_TSO) RTE_ETH_TX_OFFLOAD_GENEVE_TNL_TSO 1741 #define DEV_TX_OFFLOAD_MACSEC_INSERT RTE_DEPRECATED(DEV_TX_OFFLOAD_MACSEC_INSERT) RTE_ETH_TX_OFFLOAD_MACSEC_INSERT 1742 #define DEV_TX_OFFLOAD_MT_LOCKFREE RTE_DEPRECATED(DEV_TX_OFFLOAD_MT_LOCKFREE) RTE_ETH_TX_OFFLOAD_MT_LOCKFREE 1743 #define DEV_TX_OFFLOAD_MULTI_SEGS RTE_DEPRECATED(DEV_TX_OFFLOAD_MULTI_SEGS) RTE_ETH_TX_OFFLOAD_MULTI_SEGS 1744 #define DEV_TX_OFFLOAD_MBUF_FAST_FREE RTE_DEPRECATED(DEV_TX_OFFLOAD_MBUF_FAST_FREE) RTE_ETH_TX_OFFLOAD_MBUF_FAST_FREE 1745 #define DEV_TX_OFFLOAD_SECURITY RTE_DEPRECATED(DEV_TX_OFFLOAD_SECURITY) RTE_ETH_TX_OFFLOAD_SECURITY 1746 #define DEV_TX_OFFLOAD_UDP_TNL_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_UDP_TNL_TSO) RTE_ETH_TX_OFFLOAD_UDP_TNL_TSO 1747 #define DEV_TX_OFFLOAD_IP_TNL_TSO RTE_DEPRECATED(DEV_TX_OFFLOAD_IP_TNL_TSO) RTE_ETH_TX_OFFLOAD_IP_TNL_TSO 1748 #define DEV_TX_OFFLOAD_OUTER_UDP_CKSUM RTE_DEPRECATED(DEV_TX_OFFLOAD_OUTER_UDP_CKSUM) RTE_ETH_TX_OFFLOAD_OUTER_UDP_CKSUM 1749 #define DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP RTE_DEPRECATED(DEV_TX_OFFLOAD_SEND_ON_TIMESTAMP) RTE_ETH_TX_OFFLOAD_SEND_ON_TIMESTAMP 1750 1751 /**@{@name Device capabilities 1752 * Non-offload capabilities reported in rte_eth_dev_info.dev_capa. 1753 */ 1754 /** Device supports Rx queue setup after device started. */ 1755 #define RTE_ETH_DEV_CAPA_RUNTIME_RX_QUEUE_SETUP RTE_BIT64(0) 1756 /** Device supports Tx queue setup after device started. */ 1757 #define RTE_ETH_DEV_CAPA_RUNTIME_TX_QUEUE_SETUP RTE_BIT64(1) 1758 /** 1759 * Device supports shared Rx queue among ports within Rx domain and 1760 * switch domain. Mbufs are consumed by shared Rx queue instead of 1761 * each queue. Multiple groups are supported by share_group of Rx 1762 * queue configuration. Shared Rx queue is identified by PMD using 1763 * share_qid of Rx queue configuration. Polling any port in the group 1764 * receive packets of all member ports, source port identified by 1765 * mbuf->port field. 1766 */ 1767 #define RTE_ETH_DEV_CAPA_RXQ_SHARE RTE_BIT64(2) 1768 /** Device supports keeping flow rules across restart. */ 1769 #define RTE_ETH_DEV_CAPA_FLOW_RULE_KEEP RTE_BIT64(3) 1770 /** Device supports keeping shared flow objects across restart. */ 1771 #define RTE_ETH_DEV_CAPA_FLOW_SHARED_OBJECT_KEEP RTE_BIT64(4) 1772 /**@}*/ 1773 1774 /* 1775 * Fallback default preferred Rx/Tx port parameters. 1776 * These are used if an application requests default parameters 1777 * but the PMD does not provide preferred values. 1778 */ 1779 #define RTE_ETH_DEV_FALLBACK_RX_RINGSIZE 512 1780 #define RTE_ETH_DEV_FALLBACK_TX_RINGSIZE 512 1781 #define RTE_ETH_DEV_FALLBACK_RX_NBQUEUES 1 1782 #define RTE_ETH_DEV_FALLBACK_TX_NBQUEUES 1 1783 1784 /** 1785 * Preferred Rx/Tx port parameters. 1786 * There are separate instances of this structure for transmission 1787 * and reception respectively. 1788 */ 1789 struct rte_eth_dev_portconf { 1790 uint16_t burst_size; /**< Device-preferred burst size */ 1791 uint16_t ring_size; /**< Device-preferred size of queue rings */ 1792 uint16_t nb_queues; /**< Device-preferred number of queues */ 1793 }; 1794 1795 /** 1796 * Default values for switch domain ID when ethdev does not support switch 1797 * domain definitions. 1798 */ 1799 #define RTE_ETH_DEV_SWITCH_DOMAIN_ID_INVALID (UINT16_MAX) 1800 1801 /** 1802 * Ethernet device associated switch information 1803 */ 1804 struct rte_eth_switch_info { 1805 const char *name; /**< switch name */ 1806 uint16_t domain_id; /**< switch domain ID */ 1807 /** 1808 * Mapping to the devices physical switch port as enumerated from the 1809 * perspective of the embedded interconnect/switch. For SR-IOV enabled 1810 * device this may correspond to the VF_ID of each virtual function, 1811 * but each driver should explicitly define the mapping of switch 1812 * port identifier to that physical interconnect/switch 1813 */ 1814 uint16_t port_id; 1815 /** 1816 * Shared Rx queue sub-domain boundary. Only ports in same Rx domain 1817 * and switch domain can share Rx queue. Valid only if device advertised 1818 * RTE_ETH_DEV_CAPA_RXQ_SHARE capability. 1819 */ 1820 uint16_t rx_domain; 1821 }; 1822 1823 /** 1824 * @warning 1825 * @b EXPERIMENTAL: this structure may change without prior notice. 1826 * 1827 * Ethernet device Rx buffer segmentation capabilities. 1828 */ 1829 struct rte_eth_rxseg_capa { 1830 __extension__ 1831 uint32_t multi_pools:1; /**< Supports receiving to multiple pools.*/ 1832 uint32_t offset_allowed:1; /**< Supports buffer offsets. */ 1833 uint32_t offset_align_log2:4; /**< Required offset alignment. */ 1834 uint16_t max_nseg; /**< Maximum amount of segments to split. */ 1835 uint16_t reserved; /**< Reserved field. */ 1836 }; 1837 1838 /** 1839 * Ethernet device information 1840 */ 1841 1842 /** 1843 * Ethernet device representor port type. 1844 */ 1845 enum rte_eth_representor_type { 1846 RTE_ETH_REPRESENTOR_NONE, /**< not a representor. */ 1847 RTE_ETH_REPRESENTOR_VF, /**< representor of Virtual Function. */ 1848 RTE_ETH_REPRESENTOR_SF, /**< representor of Sub Function. */ 1849 RTE_ETH_REPRESENTOR_PF, /**< representor of Physical Function. */ 1850 }; 1851 1852 /** 1853 * A structure used to retrieve the contextual information of 1854 * an Ethernet device, such as the controlling driver of the 1855 * device, etc... 1856 */ 1857 struct rte_eth_dev_info { 1858 struct rte_device *device; /** Generic device information */ 1859 const char *driver_name; /**< Device Driver name. */ 1860 unsigned int if_index; /**< Index to bound host interface, or 0 if none. 1861 Use if_indextoname() to translate into an interface name. */ 1862 uint16_t min_mtu; /**< Minimum MTU allowed */ 1863 uint16_t max_mtu; /**< Maximum MTU allowed */ 1864 const uint32_t *dev_flags; /**< Device flags */ 1865 uint32_t min_rx_bufsize; /**< Minimum size of Rx buffer. */ 1866 uint32_t max_rx_pktlen; /**< Maximum configurable length of Rx pkt. */ 1867 /** Maximum configurable size of LRO aggregated packet. */ 1868 uint32_t max_lro_pkt_size; 1869 uint16_t max_rx_queues; /**< Maximum number of Rx queues. */ 1870 uint16_t max_tx_queues; /**< Maximum number of Tx queues. */ 1871 uint32_t max_mac_addrs; /**< Maximum number of MAC addresses. */ 1872 uint32_t max_hash_mac_addrs; 1873 /** Maximum number of hash MAC addresses for MTA and UTA. */ 1874 uint16_t max_vfs; /**< Maximum number of VFs. */ 1875 uint16_t max_vmdq_pools; /**< Maximum number of VMDq pools. */ 1876 struct rte_eth_rxseg_capa rx_seg_capa; /**< Segmentation capability.*/ 1877 /** All Rx offload capabilities including all per-queue ones */ 1878 uint64_t rx_offload_capa; 1879 /** All Tx offload capabilities including all per-queue ones */ 1880 uint64_t tx_offload_capa; 1881 /** Device per-queue Rx offload capabilities. */ 1882 uint64_t rx_queue_offload_capa; 1883 /** Device per-queue Tx offload capabilities. */ 1884 uint64_t tx_queue_offload_capa; 1885 /** Device redirection table size, the total number of entries. */ 1886 uint16_t reta_size; 1887 uint8_t hash_key_size; /**< Hash key size in bytes */ 1888 /** Bit mask of RSS offloads, the bit offset also means flow type */ 1889 uint64_t flow_type_rss_offloads; 1890 struct rte_eth_rxconf default_rxconf; /**< Default Rx configuration */ 1891 struct rte_eth_txconf default_txconf; /**< Default Tx configuration */ 1892 uint16_t vmdq_queue_base; /**< First queue ID for VMDq pools. */ 1893 uint16_t vmdq_queue_num; /**< Queue number for VMDq pools. */ 1894 uint16_t vmdq_pool_base; /**< First ID of VMDq pools. */ 1895 struct rte_eth_desc_lim rx_desc_lim; /**< Rx descriptors limits */ 1896 struct rte_eth_desc_lim tx_desc_lim; /**< Tx descriptors limits */ 1897 uint32_t speed_capa; /**< Supported speeds bitmap (RTE_ETH_LINK_SPEED_). */ 1898 /** Configured number of Rx/Tx queues */ 1899 uint16_t nb_rx_queues; /**< Number of Rx queues. */ 1900 uint16_t nb_tx_queues; /**< Number of Tx queues. */ 1901 /** Rx parameter recommendations */ 1902 struct rte_eth_dev_portconf default_rxportconf; 1903 /** Tx parameter recommendations */ 1904 struct rte_eth_dev_portconf default_txportconf; 1905 /** Generic device capabilities (RTE_ETH_DEV_CAPA_). */ 1906 uint64_t dev_capa; 1907 /** 1908 * Switching information for ports on a device with a 1909 * embedded managed interconnect/switch. 1910 */ 1911 struct rte_eth_switch_info switch_info; 1912 1913 uint64_t reserved_64s[2]; /**< Reserved for future fields */ 1914 void *reserved_ptrs[2]; /**< Reserved for future fields */ 1915 }; 1916 1917 /**@{@name Rx/Tx queue states */ 1918 #define RTE_ETH_QUEUE_STATE_STOPPED 0 /**< Queue stopped. */ 1919 #define RTE_ETH_QUEUE_STATE_STARTED 1 /**< Queue started. */ 1920 #define RTE_ETH_QUEUE_STATE_HAIRPIN 2 /**< Queue used for hairpin. */ 1921 /**@}*/ 1922 1923 /** 1924 * Ethernet device Rx queue information structure. 1925 * Used to retrieve information about configured queue. 1926 */ 1927 struct rte_eth_rxq_info { 1928 struct rte_mempool *mp; /**< mempool used by that queue. */ 1929 struct rte_eth_rxconf conf; /**< queue config parameters. */ 1930 uint8_t scattered_rx; /**< scattered packets Rx supported. */ 1931 uint8_t queue_state; /**< one of RTE_ETH_QUEUE_STATE_*. */ 1932 uint16_t nb_desc; /**< configured number of RXDs. */ 1933 uint16_t rx_buf_size; /**< hardware receive buffer size. */ 1934 } __rte_cache_min_aligned; 1935 1936 /** 1937 * Ethernet device Tx queue information structure. 1938 * Used to retrieve information about configured queue. 1939 */ 1940 struct rte_eth_txq_info { 1941 struct rte_eth_txconf conf; /**< queue config parameters. */ 1942 uint16_t nb_desc; /**< configured number of TXDs. */ 1943 uint8_t queue_state; /**< one of RTE_ETH_QUEUE_STATE_*. */ 1944 } __rte_cache_min_aligned; 1945 1946 /* Generic Burst mode flag definition, values can be ORed. */ 1947 1948 /** 1949 * If the queues have different burst mode description, this bit will be set 1950 * by PMD, then the application can iterate to retrieve burst description for 1951 * all other queues. 1952 */ 1953 #define RTE_ETH_BURST_FLAG_PER_QUEUE RTE_BIT64(0) 1954 1955 /** 1956 * Ethernet device Rx/Tx queue packet burst mode information structure. 1957 * Used to retrieve information about packet burst mode setting. 1958 */ 1959 struct rte_eth_burst_mode { 1960 uint64_t flags; /**< The ORed values of RTE_ETH_BURST_FLAG_xxx */ 1961 1962 #define RTE_ETH_BURST_MODE_INFO_SIZE 1024 /**< Maximum size for information */ 1963 char info[RTE_ETH_BURST_MODE_INFO_SIZE]; /**< burst mode information */ 1964 }; 1965 1966 /** Maximum name length for extended statistics counters */ 1967 #define RTE_ETH_XSTATS_NAME_SIZE 64 1968 1969 /** 1970 * An Ethernet device extended statistic structure 1971 * 1972 * This structure is used by rte_eth_xstats_get() to provide 1973 * statistics that are not provided in the generic *rte_eth_stats* 1974 * structure. 1975 * It maps a name ID, corresponding to an index in the array returned 1976 * by rte_eth_xstats_get_names(), to a statistic value. 1977 */ 1978 struct rte_eth_xstat { 1979 uint64_t id; /**< The index in xstats name array. */ 1980 uint64_t value; /**< The statistic counter value. */ 1981 }; 1982 1983 /** 1984 * A name element for extended statistics. 1985 * 1986 * An array of this structure is returned by rte_eth_xstats_get_names(). 1987 * It lists the names of extended statistics for a PMD. The *rte_eth_xstat* 1988 * structure references these names by their array index. 1989 * 1990 * The xstats should follow a common naming scheme. 1991 * Some names are standardized in rte_stats_strings. 1992 * Examples: 1993 * - rx_missed_errors 1994 * - tx_q3_bytes 1995 * - tx_size_128_to_255_packets 1996 */ 1997 struct rte_eth_xstat_name { 1998 char name[RTE_ETH_XSTATS_NAME_SIZE]; /**< The statistic name. */ 1999 }; 2000 2001 #define RTE_ETH_DCB_NUM_TCS 8 2002 #define RTE_ETH_MAX_VMDQ_POOL 64 2003 2004 #define ETH_DCB_NUM_TCS RTE_DEPRECATED(ETH_DCB_NUM_TCS) RTE_ETH_DCB_NUM_TCS 2005 #define ETH_MAX_VMDQ_POOL RTE_DEPRECATED(ETH_MAX_VMDQ_POOL) RTE_ETH_MAX_VMDQ_POOL 2006 2007 /** 2008 * A structure used to get the information of queue and 2009 * TC mapping on both Tx and Rx paths. 2010 */ 2011 struct rte_eth_dcb_tc_queue_mapping { 2012 /** Rx queues assigned to tc per Pool */ 2013 struct { 2014 uint16_t base; 2015 uint16_t nb_queue; 2016 } tc_rxq[RTE_ETH_MAX_VMDQ_POOL][RTE_ETH_DCB_NUM_TCS]; 2017 /** Rx queues assigned to tc per Pool */ 2018 struct { 2019 uint16_t base; 2020 uint16_t nb_queue; 2021 } tc_txq[RTE_ETH_MAX_VMDQ_POOL][RTE_ETH_DCB_NUM_TCS]; 2022 }; 2023 2024 /** 2025 * A structure used to get the information of DCB. 2026 * It includes TC UP mapping and queue TC mapping. 2027 */ 2028 struct rte_eth_dcb_info { 2029 uint8_t nb_tcs; /**< number of TCs */ 2030 uint8_t prio_tc[RTE_ETH_DCB_NUM_USER_PRIORITIES]; /**< Priority to tc */ 2031 uint8_t tc_bws[RTE_ETH_DCB_NUM_TCS]; /**< Tx BW percentage for each TC */ 2032 /** Rx queues assigned to tc */ 2033 struct rte_eth_dcb_tc_queue_mapping tc_queue; 2034 }; 2035 2036 /** 2037 * This enum indicates the possible Forward Error Correction (FEC) modes 2038 * of an ethdev port. 2039 */ 2040 enum rte_eth_fec_mode { 2041 RTE_ETH_FEC_NOFEC = 0, /**< FEC is off */ 2042 RTE_ETH_FEC_AUTO, /**< FEC autonegotiation modes */ 2043 RTE_ETH_FEC_BASER, /**< FEC using common algorithm */ 2044 RTE_ETH_FEC_RS, /**< FEC using RS algorithm */ 2045 }; 2046 2047 /* Translate from FEC mode to FEC capa */ 2048 #define RTE_ETH_FEC_MODE_TO_CAPA(x) RTE_BIT32(x) 2049 2050 /* This macro indicates FEC capa mask */ 2051 #define RTE_ETH_FEC_MODE_CAPA_MASK(x) RTE_BIT32(RTE_ETH_FEC_ ## x) 2052 2053 /* A structure used to get capabilities per link speed */ 2054 struct rte_eth_fec_capa { 2055 uint32_t speed; /**< Link speed (see RTE_ETH_SPEED_NUM_*) */ 2056 uint32_t capa; /**< FEC capabilities bitmask */ 2057 }; 2058 2059 #define RTE_ETH_ALL RTE_MAX_ETHPORTS 2060 2061 /* Macros to check for valid port */ 2062 #define RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, retval) do { \ 2063 if (!rte_eth_dev_is_valid_port(port_id)) { \ 2064 RTE_ETHDEV_LOG(ERR, "Invalid port_id=%u\n", port_id); \ 2065 return retval; \ 2066 } \ 2067 } while (0) 2068 2069 #define RTE_ETH_VALID_PORTID_OR_RET(port_id) do { \ 2070 if (!rte_eth_dev_is_valid_port(port_id)) { \ 2071 RTE_ETHDEV_LOG(ERR, "Invalid port_id=%u\n", port_id); \ 2072 return; \ 2073 } \ 2074 } while (0) 2075 2076 /** 2077 * Function type used for Rx packet processing packet callbacks. 2078 * 2079 * The callback function is called on Rx with a burst of packets that have 2080 * been received on the given port and queue. 2081 * 2082 * @param port_id 2083 * The Ethernet port on which Rx is being performed. 2084 * @param queue 2085 * The queue on the Ethernet port which is being used to receive the packets. 2086 * @param pkts 2087 * The burst of packets that have just been received. 2088 * @param nb_pkts 2089 * The number of packets in the burst pointed to by "pkts". 2090 * @param max_pkts 2091 * The max number of packets that can be stored in the "pkts" array. 2092 * @param user_param 2093 * The arbitrary user parameter passed in by the application when the callback 2094 * was originally configured. 2095 * @return 2096 * The number of packets returned to the user. 2097 */ 2098 typedef uint16_t (*rte_rx_callback_fn)(uint16_t port_id, uint16_t queue, 2099 struct rte_mbuf *pkts[], uint16_t nb_pkts, uint16_t max_pkts, 2100 void *user_param); 2101 2102 /** 2103 * Function type used for Tx packet processing packet callbacks. 2104 * 2105 * The callback function is called on Tx with a burst of packets immediately 2106 * before the packets are put onto the hardware queue for transmission. 2107 * 2108 * @param port_id 2109 * The Ethernet port on which Tx is being performed. 2110 * @param queue 2111 * The queue on the Ethernet port which is being used to transmit the packets. 2112 * @param pkts 2113 * The burst of packets that are about to be transmitted. 2114 * @param nb_pkts 2115 * The number of packets in the burst pointed to by "pkts". 2116 * @param user_param 2117 * The arbitrary user parameter passed in by the application when the callback 2118 * was originally configured. 2119 * @return 2120 * The number of packets to be written to the NIC. 2121 */ 2122 typedef uint16_t (*rte_tx_callback_fn)(uint16_t port_id, uint16_t queue, 2123 struct rte_mbuf *pkts[], uint16_t nb_pkts, void *user_param); 2124 2125 /** 2126 * Possible states of an ethdev port. 2127 */ 2128 enum rte_eth_dev_state { 2129 /** Device is unused before being probed. */ 2130 RTE_ETH_DEV_UNUSED = 0, 2131 /** Device is attached when allocated in probing. */ 2132 RTE_ETH_DEV_ATTACHED, 2133 /** Device is in removed state when plug-out is detected. */ 2134 RTE_ETH_DEV_REMOVED, 2135 }; 2136 2137 struct rte_eth_dev_sriov { 2138 uint8_t active; /**< SRIOV is active with 16, 32 or 64 pools */ 2139 uint8_t nb_q_per_pool; /**< Rx queue number per pool */ 2140 uint16_t def_vmdq_idx; /**< Default pool num used for PF */ 2141 uint16_t def_pool_q_idx; /**< Default pool queue start reg index */ 2142 }; 2143 #define RTE_ETH_DEV_SRIOV(dev) ((dev)->data->sriov) 2144 2145 #define RTE_ETH_NAME_MAX_LEN RTE_DEV_NAME_MAX_LEN 2146 2147 #define RTE_ETH_DEV_NO_OWNER 0 2148 2149 #define RTE_ETH_MAX_OWNER_NAME_LEN 64 2150 2151 struct rte_eth_dev_owner { 2152 uint64_t id; /**< The owner unique identifier. */ 2153 char name[RTE_ETH_MAX_OWNER_NAME_LEN]; /**< The owner name. */ 2154 }; 2155 2156 /**@{@name Device flags 2157 * Flags internally saved in rte_eth_dev_data.dev_flags 2158 * and reported in rte_eth_dev_info.dev_flags. 2159 */ 2160 /** PMD supports thread-safe flow operations */ 2161 #define RTE_ETH_DEV_FLOW_OPS_THREAD_SAFE RTE_BIT32(0) 2162 /** Device supports link state interrupt */ 2163 #define RTE_ETH_DEV_INTR_LSC RTE_BIT32(1) 2164 /** Device is a bonded slave */ 2165 #define RTE_ETH_DEV_BONDED_SLAVE RTE_BIT32(2) 2166 /** Device supports device removal interrupt */ 2167 #define RTE_ETH_DEV_INTR_RMV RTE_BIT32(3) 2168 /** Device is port representor */ 2169 #define RTE_ETH_DEV_REPRESENTOR RTE_BIT32(4) 2170 /** Device does not support MAC change after started */ 2171 #define RTE_ETH_DEV_NOLIVE_MAC_ADDR RTE_BIT32(5) 2172 /** 2173 * Queue xstats filled automatically by ethdev layer. 2174 * PMDs filling the queue xstats themselves should not set this flag 2175 */ 2176 #define RTE_ETH_DEV_AUTOFILL_QUEUE_XSTATS RTE_BIT32(6) 2177 /**@}*/ 2178 2179 /** 2180 * Iterates over valid ethdev ports owned by a specific owner. 2181 * 2182 * @param port_id 2183 * The ID of the next possible valid owned port. 2184 * @param owner_id 2185 * The owner identifier. 2186 * RTE_ETH_DEV_NO_OWNER means iterate over all valid ownerless ports. 2187 * @return 2188 * Next valid port ID owned by owner_id, RTE_MAX_ETHPORTS if there is none. 2189 */ 2190 uint64_t rte_eth_find_next_owned_by(uint16_t port_id, 2191 const uint64_t owner_id); 2192 2193 /** 2194 * Macro to iterate over all enabled ethdev ports owned by a specific owner. 2195 */ 2196 #define RTE_ETH_FOREACH_DEV_OWNED_BY(p, o) \ 2197 for (p = rte_eth_find_next_owned_by(0, o); \ 2198 (unsigned int)p < (unsigned int)RTE_MAX_ETHPORTS; \ 2199 p = rte_eth_find_next_owned_by(p + 1, o)) 2200 2201 /** 2202 * Iterates over valid ethdev ports. 2203 * 2204 * @param port_id 2205 * The ID of the next possible valid port. 2206 * @return 2207 * Next valid port ID, RTE_MAX_ETHPORTS if there is none. 2208 */ 2209 uint16_t rte_eth_find_next(uint16_t port_id); 2210 2211 /** 2212 * Macro to iterate over all enabled and ownerless ethdev ports. 2213 */ 2214 #define RTE_ETH_FOREACH_DEV(p) \ 2215 RTE_ETH_FOREACH_DEV_OWNED_BY(p, RTE_ETH_DEV_NO_OWNER) 2216 2217 /** 2218 * Iterates over ethdev ports of a specified device. 2219 * 2220 * @param port_id_start 2221 * The ID of the next possible valid port. 2222 * @param parent 2223 * The generic device behind the ports to iterate. 2224 * @return 2225 * Next port ID of the device, possibly port_id_start, 2226 * RTE_MAX_ETHPORTS if there is none. 2227 */ 2228 uint16_t 2229 rte_eth_find_next_of(uint16_t port_id_start, 2230 const struct rte_device *parent); 2231 2232 /** 2233 * Macro to iterate over all ethdev ports of a specified device. 2234 * 2235 * @param port_id 2236 * The ID of the matching port being iterated. 2237 * @param parent 2238 * The rte_device pointer matching the iterated ports. 2239 */ 2240 #define RTE_ETH_FOREACH_DEV_OF(port_id, parent) \ 2241 for (port_id = rte_eth_find_next_of(0, parent); \ 2242 port_id < RTE_MAX_ETHPORTS; \ 2243 port_id = rte_eth_find_next_of(port_id + 1, parent)) 2244 2245 /** 2246 * Iterates over sibling ethdev ports (i.e. sharing the same rte_device). 2247 * 2248 * @param port_id_start 2249 * The ID of the next possible valid sibling port. 2250 * @param ref_port_id 2251 * The ID of a reference port to compare rte_device with. 2252 * @return 2253 * Next sibling port ID, possibly port_id_start or ref_port_id itself, 2254 * RTE_MAX_ETHPORTS if there is none. 2255 */ 2256 uint16_t 2257 rte_eth_find_next_sibling(uint16_t port_id_start, uint16_t ref_port_id); 2258 2259 /** 2260 * Macro to iterate over all ethdev ports sharing the same rte_device 2261 * as the specified port. 2262 * Note: the specified reference port is part of the loop iterations. 2263 * 2264 * @param port_id 2265 * The ID of the matching port being iterated. 2266 * @param ref_port_id 2267 * The ID of the port being compared. 2268 */ 2269 #define RTE_ETH_FOREACH_DEV_SIBLING(port_id, ref_port_id) \ 2270 for (port_id = rte_eth_find_next_sibling(0, ref_port_id); \ 2271 port_id < RTE_MAX_ETHPORTS; \ 2272 port_id = rte_eth_find_next_sibling(port_id + 1, ref_port_id)) 2273 2274 /** 2275 * @warning 2276 * @b EXPERIMENTAL: this API may change without prior notice. 2277 * 2278 * Get a new unique owner identifier. 2279 * An owner identifier is used to owns Ethernet devices by only one DPDK entity 2280 * to avoid multiple management of device by different entities. 2281 * 2282 * @param owner_id 2283 * Owner identifier pointer. 2284 * @return 2285 * Negative errno value on error, 0 on success. 2286 */ 2287 __rte_experimental 2288 int rte_eth_dev_owner_new(uint64_t *owner_id); 2289 2290 /** 2291 * @warning 2292 * @b EXPERIMENTAL: this API may change without prior notice. 2293 * 2294 * Set an Ethernet device owner. 2295 * 2296 * @param port_id 2297 * The identifier of the port to own. 2298 * @param owner 2299 * The owner pointer. 2300 * @return 2301 * Negative errno value on error, 0 on success. 2302 */ 2303 __rte_experimental 2304 int rte_eth_dev_owner_set(const uint16_t port_id, 2305 const struct rte_eth_dev_owner *owner); 2306 2307 /** 2308 * @warning 2309 * @b EXPERIMENTAL: this API may change without prior notice. 2310 * 2311 * Unset Ethernet device owner to make the device ownerless. 2312 * 2313 * @param port_id 2314 * The identifier of port to make ownerless. 2315 * @param owner_id 2316 * The owner identifier. 2317 * @return 2318 * 0 on success, negative errno value on error. 2319 */ 2320 __rte_experimental 2321 int rte_eth_dev_owner_unset(const uint16_t port_id, 2322 const uint64_t owner_id); 2323 2324 /** 2325 * @warning 2326 * @b EXPERIMENTAL: this API may change without prior notice. 2327 * 2328 * Remove owner from all Ethernet devices owned by a specific owner. 2329 * 2330 * @param owner_id 2331 * The owner identifier. 2332 * @return 2333 * 0 on success, negative errno value on error. 2334 */ 2335 __rte_experimental 2336 int rte_eth_dev_owner_delete(const uint64_t owner_id); 2337 2338 /** 2339 * @warning 2340 * @b EXPERIMENTAL: this API may change without prior notice. 2341 * 2342 * Get the owner of an Ethernet device. 2343 * 2344 * @param port_id 2345 * The port identifier. 2346 * @param owner 2347 * The owner structure pointer to fill. 2348 * @return 2349 * 0 on success, negative errno value on error.. 2350 */ 2351 __rte_experimental 2352 int rte_eth_dev_owner_get(const uint16_t port_id, 2353 struct rte_eth_dev_owner *owner); 2354 2355 /** 2356 * Get the number of ports which are usable for the application. 2357 * 2358 * These devices must be iterated by using the macro 2359 * ``RTE_ETH_FOREACH_DEV`` or ``RTE_ETH_FOREACH_DEV_OWNED_BY`` 2360 * to deal with non-contiguous ranges of devices. 2361 * 2362 * @return 2363 * The count of available Ethernet devices. 2364 */ 2365 uint16_t rte_eth_dev_count_avail(void); 2366 2367 /** 2368 * Get the total number of ports which are allocated. 2369 * 2370 * Some devices may not be available for the application. 2371 * 2372 * @return 2373 * The total count of Ethernet devices. 2374 */ 2375 uint16_t rte_eth_dev_count_total(void); 2376 2377 /** 2378 * Convert a numerical speed in Mbps to a bitmap flag that can be used in 2379 * the bitmap link_speeds of the struct rte_eth_conf 2380 * 2381 * @param speed 2382 * Numerical speed value in Mbps 2383 * @param duplex 2384 * RTE_ETH_LINK_[HALF/FULL]_DUPLEX (only for 10/100M speeds) 2385 * @return 2386 * 0 if the speed cannot be mapped 2387 */ 2388 uint32_t rte_eth_speed_bitflag(uint32_t speed, int duplex); 2389 2390 /** 2391 * Get RTE_ETH_RX_OFFLOAD_* flag name. 2392 * 2393 * @param offload 2394 * Offload flag. 2395 * @return 2396 * Offload name or 'UNKNOWN' if the flag cannot be recognised. 2397 */ 2398 const char *rte_eth_dev_rx_offload_name(uint64_t offload); 2399 2400 /** 2401 * Get RTE_ETH_TX_OFFLOAD_* flag name. 2402 * 2403 * @param offload 2404 * Offload flag. 2405 * @return 2406 * Offload name or 'UNKNOWN' if the flag cannot be recognised. 2407 */ 2408 const char *rte_eth_dev_tx_offload_name(uint64_t offload); 2409 2410 /** 2411 * @warning 2412 * @b EXPERIMENTAL: this API may change without prior notice. 2413 * 2414 * Get RTE_ETH_DEV_CAPA_* flag name. 2415 * 2416 * @param capability 2417 * Capability flag. 2418 * @return 2419 * Capability name or 'UNKNOWN' if the flag cannot be recognized. 2420 */ 2421 __rte_experimental 2422 const char *rte_eth_dev_capability_name(uint64_t capability); 2423 2424 /** 2425 * Configure an Ethernet device. 2426 * This function must be invoked first before any other function in the 2427 * Ethernet API. This function can also be re-invoked when a device is in the 2428 * stopped state. 2429 * 2430 * @param port_id 2431 * The port identifier of the Ethernet device to configure. 2432 * @param nb_rx_queue 2433 * The number of receive queues to set up for the Ethernet device. 2434 * @param nb_tx_queue 2435 * The number of transmit queues to set up for the Ethernet device. 2436 * @param eth_conf 2437 * The pointer to the configuration data to be used for the Ethernet device. 2438 * The *rte_eth_conf* structure includes: 2439 * - the hardware offload features to activate, with dedicated fields for 2440 * each statically configurable offload hardware feature provided by 2441 * Ethernet devices, such as IP checksum or VLAN tag stripping for 2442 * example. 2443 * The Rx offload bitfield API is obsolete and will be deprecated. 2444 * Applications should set the ignore_bitfield_offloads bit on *rxmode* 2445 * structure and use offloads field to set per-port offloads instead. 2446 * - Any offloading set in eth_conf->[rt]xmode.offloads must be within 2447 * the [rt]x_offload_capa returned from rte_eth_dev_info_get(). 2448 * Any type of device supported offloading set in the input argument 2449 * eth_conf->[rt]xmode.offloads to rte_eth_dev_configure() is enabled 2450 * on all queues and it can't be disabled in rte_eth_[rt]x_queue_setup() 2451 * - the Receive Side Scaling (RSS) configuration when using multiple Rx 2452 * queues per port. Any RSS hash function set in eth_conf->rss_conf.rss_hf 2453 * must be within the flow_type_rss_offloads provided by drivers via 2454 * rte_eth_dev_info_get() API. 2455 * 2456 * Embedding all configuration information in a single data structure 2457 * is the more flexible method that allows the addition of new features 2458 * without changing the syntax of the API. 2459 * @return 2460 * - 0: Success, device configured. 2461 * - <0: Error code returned by the driver configuration function. 2462 */ 2463 int rte_eth_dev_configure(uint16_t port_id, uint16_t nb_rx_queue, 2464 uint16_t nb_tx_queue, const struct rte_eth_conf *eth_conf); 2465 2466 /** 2467 * Check if an Ethernet device was physically removed. 2468 * 2469 * @param port_id 2470 * The port identifier of the Ethernet device. 2471 * @return 2472 * 1 when the Ethernet device is removed, otherwise 0. 2473 */ 2474 int 2475 rte_eth_dev_is_removed(uint16_t port_id); 2476 2477 /** 2478 * Allocate and set up a receive queue for an Ethernet device. 2479 * 2480 * The function allocates a contiguous block of memory for *nb_rx_desc* 2481 * receive descriptors from a memory zone associated with *socket_id* 2482 * and initializes each receive descriptor with a network buffer allocated 2483 * from the memory pool *mb_pool*. 2484 * 2485 * @param port_id 2486 * The port identifier of the Ethernet device. 2487 * @param rx_queue_id 2488 * The index of the receive queue to set up. 2489 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 2490 * to rte_eth_dev_configure(). 2491 * @param nb_rx_desc 2492 * The number of receive descriptors to allocate for the receive ring. 2493 * @param socket_id 2494 * The *socket_id* argument is the socket identifier in case of NUMA. 2495 * The value can be *SOCKET_ID_ANY* if there is no NUMA constraint for 2496 * the DMA memory allocated for the receive descriptors of the ring. 2497 * @param rx_conf 2498 * The pointer to the configuration data to be used for the receive queue. 2499 * NULL value is allowed, in which case default Rx configuration 2500 * will be used. 2501 * The *rx_conf* structure contains an *rx_thresh* structure with the values 2502 * of the Prefetch, Host, and Write-Back threshold registers of the receive 2503 * ring. 2504 * In addition it contains the hardware offloads features to activate using 2505 * the RTE_ETH_RX_OFFLOAD_* flags. 2506 * If an offloading set in rx_conf->offloads 2507 * hasn't been set in the input argument eth_conf->rxmode.offloads 2508 * to rte_eth_dev_configure(), it is a new added offloading, it must be 2509 * per-queue type and it is enabled for the queue. 2510 * No need to repeat any bit in rx_conf->offloads which has already been 2511 * enabled in rte_eth_dev_configure() at port level. An offloading enabled 2512 * at port level can't be disabled at queue level. 2513 * The configuration structure also contains the pointer to the array 2514 * of the receiving buffer segment descriptions, see rx_seg and rx_nseg 2515 * fields, this extended configuration might be used by split offloads like 2516 * RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT. If mb_pool is not NULL, 2517 * the extended configuration fields must be set to NULL and zero. 2518 * @param mb_pool 2519 * The pointer to the memory pool from which to allocate *rte_mbuf* network 2520 * memory buffers to populate each descriptor of the receive ring. There are 2521 * two options to provide Rx buffer configuration: 2522 * - single pool: 2523 * mb_pool is not NULL, rx_conf.rx_nseg is 0. 2524 * - multiple segments description: 2525 * mb_pool is NULL, rx_conf.rx_seg is not NULL, rx_conf.rx_nseg is not 0. 2526 * Taken only if flag RTE_ETH_RX_OFFLOAD_BUFFER_SPLIT is set in offloads. 2527 * 2528 * @return 2529 * - 0: Success, receive queue correctly set up. 2530 * - -EIO: if device is removed. 2531 * - -ENODEV: if *port_id* is invalid. 2532 * - -EINVAL: The memory pool pointer is null or the size of network buffers 2533 * which can be allocated from this memory pool does not fit the various 2534 * buffer sizes allowed by the device controller. 2535 * - -ENOMEM: Unable to allocate the receive ring descriptors or to 2536 * allocate network memory buffers from the memory pool when 2537 * initializing receive descriptors. 2538 */ 2539 int rte_eth_rx_queue_setup(uint16_t port_id, uint16_t rx_queue_id, 2540 uint16_t nb_rx_desc, unsigned int socket_id, 2541 const struct rte_eth_rxconf *rx_conf, 2542 struct rte_mempool *mb_pool); 2543 2544 /** 2545 * @warning 2546 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 2547 * 2548 * Allocate and set up a hairpin receive queue for an Ethernet device. 2549 * 2550 * The function set up the selected queue to be used in hairpin. 2551 * 2552 * @param port_id 2553 * The port identifier of the Ethernet device. 2554 * @param rx_queue_id 2555 * The index of the receive queue to set up. 2556 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 2557 * to rte_eth_dev_configure(). 2558 * @param nb_rx_desc 2559 * The number of receive descriptors to allocate for the receive ring. 2560 * 0 means the PMD will use default value. 2561 * @param conf 2562 * The pointer to the hairpin configuration. 2563 * 2564 * @return 2565 * - (0) if successful. 2566 * - (-ENODEV) if *port_id* is invalid. 2567 * - (-ENOTSUP) if hardware doesn't support. 2568 * - (-EINVAL) if bad parameter. 2569 * - (-ENOMEM) if unable to allocate the resources. 2570 */ 2571 __rte_experimental 2572 int rte_eth_rx_hairpin_queue_setup 2573 (uint16_t port_id, uint16_t rx_queue_id, uint16_t nb_rx_desc, 2574 const struct rte_eth_hairpin_conf *conf); 2575 2576 /** 2577 * Allocate and set up a transmit queue for an Ethernet device. 2578 * 2579 * @param port_id 2580 * The port identifier of the Ethernet device. 2581 * @param tx_queue_id 2582 * The index of the transmit queue to set up. 2583 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 2584 * to rte_eth_dev_configure(). 2585 * @param nb_tx_desc 2586 * The number of transmit descriptors to allocate for the transmit ring. 2587 * @param socket_id 2588 * The *socket_id* argument is the socket identifier in case of NUMA. 2589 * Its value can be *SOCKET_ID_ANY* if there is no NUMA constraint for 2590 * the DMA memory allocated for the transmit descriptors of the ring. 2591 * @param tx_conf 2592 * The pointer to the configuration data to be used for the transmit queue. 2593 * NULL value is allowed, in which case default Tx configuration 2594 * will be used. 2595 * The *tx_conf* structure contains the following data: 2596 * - The *tx_thresh* structure with the values of the Prefetch, Host, and 2597 * Write-Back threshold registers of the transmit ring. 2598 * When setting Write-Back threshold to the value greater then zero, 2599 * *tx_rs_thresh* value should be explicitly set to one. 2600 * - The *tx_free_thresh* value indicates the [minimum] number of network 2601 * buffers that must be pending in the transmit ring to trigger their 2602 * [implicit] freeing by the driver transmit function. 2603 * - The *tx_rs_thresh* value indicates the [minimum] number of transmit 2604 * descriptors that must be pending in the transmit ring before setting the 2605 * RS bit on a descriptor by the driver transmit function. 2606 * The *tx_rs_thresh* value should be less or equal then 2607 * *tx_free_thresh* value, and both of them should be less then 2608 * *nb_tx_desc* - 3. 2609 * - The *offloads* member contains Tx offloads to be enabled. 2610 * If an offloading set in tx_conf->offloads 2611 * hasn't been set in the input argument eth_conf->txmode.offloads 2612 * to rte_eth_dev_configure(), it is a new added offloading, it must be 2613 * per-queue type and it is enabled for the queue. 2614 * No need to repeat any bit in tx_conf->offloads which has already been 2615 * enabled in rte_eth_dev_configure() at port level. An offloading enabled 2616 * at port level can't be disabled at queue level. 2617 * 2618 * Note that setting *tx_free_thresh* or *tx_rs_thresh* value to 0 forces 2619 * the transmit function to use default values. 2620 * @return 2621 * - 0: Success, the transmit queue is correctly set up. 2622 * - -ENOMEM: Unable to allocate the transmit ring descriptors. 2623 */ 2624 int rte_eth_tx_queue_setup(uint16_t port_id, uint16_t tx_queue_id, 2625 uint16_t nb_tx_desc, unsigned int socket_id, 2626 const struct rte_eth_txconf *tx_conf); 2627 2628 /** 2629 * @warning 2630 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 2631 * 2632 * Allocate and set up a transmit hairpin queue for an Ethernet device. 2633 * 2634 * @param port_id 2635 * The port identifier of the Ethernet device. 2636 * @param tx_queue_id 2637 * The index of the transmit queue to set up. 2638 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 2639 * to rte_eth_dev_configure(). 2640 * @param nb_tx_desc 2641 * The number of transmit descriptors to allocate for the transmit ring. 2642 * 0 to set default PMD value. 2643 * @param conf 2644 * The hairpin configuration. 2645 * 2646 * @return 2647 * - (0) if successful. 2648 * - (-ENODEV) if *port_id* is invalid. 2649 * - (-ENOTSUP) if hardware doesn't support. 2650 * - (-EINVAL) if bad parameter. 2651 * - (-ENOMEM) if unable to allocate the resources. 2652 */ 2653 __rte_experimental 2654 int rte_eth_tx_hairpin_queue_setup 2655 (uint16_t port_id, uint16_t tx_queue_id, uint16_t nb_tx_desc, 2656 const struct rte_eth_hairpin_conf *conf); 2657 2658 /** 2659 * @warning 2660 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 2661 * 2662 * Get all the hairpin peer Rx / Tx ports of the current port. 2663 * The caller should ensure that the array is large enough to save the ports 2664 * list. 2665 * 2666 * @param port_id 2667 * The port identifier of the Ethernet device. 2668 * @param peer_ports 2669 * Pointer to the array to store the peer ports list. 2670 * @param len 2671 * Length of the array to store the port identifiers. 2672 * @param direction 2673 * Current port to peer port direction 2674 * positive - current used as Tx to get all peer Rx ports. 2675 * zero - current used as Rx to get all peer Tx ports. 2676 * 2677 * @return 2678 * - (0 or positive) actual peer ports number. 2679 * - (-EINVAL) if bad parameter. 2680 * - (-ENODEV) if *port_id* invalid 2681 * - (-ENOTSUP) if hardware doesn't support. 2682 * - Others detailed errors from PMDs. 2683 */ 2684 __rte_experimental 2685 int rte_eth_hairpin_get_peer_ports(uint16_t port_id, uint16_t *peer_ports, 2686 size_t len, uint32_t direction); 2687 2688 /** 2689 * @warning 2690 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 2691 * 2692 * Bind all hairpin Tx queues of one port to the Rx queues of the peer port. 2693 * It is only allowed to call this function after all hairpin queues are 2694 * configured properly and the devices are in started state. 2695 * 2696 * @param tx_port 2697 * The identifier of the Tx port. 2698 * @param rx_port 2699 * The identifier of peer Rx port. 2700 * RTE_MAX_ETHPORTS is allowed for the traversal of all devices. 2701 * Rx port ID could have the same value as Tx port ID. 2702 * 2703 * @return 2704 * - (0) if successful. 2705 * - (-ENODEV) if Tx port ID is invalid. 2706 * - (-EBUSY) if device is not in started state. 2707 * - (-ENOTSUP) if hardware doesn't support. 2708 * - Others detailed errors from PMDs. 2709 */ 2710 __rte_experimental 2711 int rte_eth_hairpin_bind(uint16_t tx_port, uint16_t rx_port); 2712 2713 /** 2714 * @warning 2715 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 2716 * 2717 * Unbind all hairpin Tx queues of one port from the Rx queues of the peer port. 2718 * This should be called before closing the Tx or Rx devices, if the bind 2719 * function is called before. 2720 * After unbinding the hairpin ports pair, it is allowed to bind them again. 2721 * Changing queues configuration should be after stopping the device(s). 2722 * 2723 * @param tx_port 2724 * The identifier of the Tx port. 2725 * @param rx_port 2726 * The identifier of peer Rx port. 2727 * RTE_MAX_ETHPORTS is allowed for traversal of all devices. 2728 * Rx port ID could have the same value as Tx port ID. 2729 * 2730 * @return 2731 * - (0) if successful. 2732 * - (-ENODEV) if Tx port ID is invalid. 2733 * - (-EBUSY) if device is in stopped state. 2734 * - (-ENOTSUP) if hardware doesn't support. 2735 * - Others detailed errors from PMDs. 2736 */ 2737 __rte_experimental 2738 int rte_eth_hairpin_unbind(uint16_t tx_port, uint16_t rx_port); 2739 2740 /** 2741 * Return the NUMA socket to which an Ethernet device is connected 2742 * 2743 * @param port_id 2744 * The port identifier of the Ethernet device 2745 * @return 2746 * The NUMA socket ID to which the Ethernet device is connected or 2747 * a default of zero if the socket could not be determined. 2748 * -1 is returned is the port_id value is out of range. 2749 */ 2750 int rte_eth_dev_socket_id(uint16_t port_id); 2751 2752 /** 2753 * Check if port_id of device is attached 2754 * 2755 * @param port_id 2756 * The port identifier of the Ethernet device 2757 * @return 2758 * - 0 if port is out of range or not attached 2759 * - 1 if device is attached 2760 */ 2761 int rte_eth_dev_is_valid_port(uint16_t port_id); 2762 2763 /** 2764 * Start specified Rx queue of a port. It is used when rx_deferred_start 2765 * flag of the specified queue is true. 2766 * 2767 * @param port_id 2768 * The port identifier of the Ethernet device 2769 * @param rx_queue_id 2770 * The index of the Rx queue to update the ring. 2771 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 2772 * to rte_eth_dev_configure(). 2773 * @return 2774 * - 0: Success, the receive queue is started. 2775 * - -ENODEV: if *port_id* is invalid. 2776 * - -EINVAL: The queue_id out of range or belong to hairpin. 2777 * - -EIO: if device is removed. 2778 * - -ENOTSUP: The function not supported in PMD. 2779 */ 2780 int rte_eth_dev_rx_queue_start(uint16_t port_id, uint16_t rx_queue_id); 2781 2782 /** 2783 * Stop specified Rx queue of a port 2784 * 2785 * @param port_id 2786 * The port identifier of the Ethernet device 2787 * @param rx_queue_id 2788 * The index of the Rx queue to update the ring. 2789 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 2790 * to rte_eth_dev_configure(). 2791 * @return 2792 * - 0: Success, the receive queue is stopped. 2793 * - -ENODEV: if *port_id* is invalid. 2794 * - -EINVAL: The queue_id out of range or belong to hairpin. 2795 * - -EIO: if device is removed. 2796 * - -ENOTSUP: The function not supported in PMD. 2797 */ 2798 int rte_eth_dev_rx_queue_stop(uint16_t port_id, uint16_t rx_queue_id); 2799 2800 /** 2801 * Start Tx for specified queue of a port. It is used when tx_deferred_start 2802 * flag of the specified queue is true. 2803 * 2804 * @param port_id 2805 * The port identifier of the Ethernet device 2806 * @param tx_queue_id 2807 * The index of the Tx queue to update the ring. 2808 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 2809 * to rte_eth_dev_configure(). 2810 * @return 2811 * - 0: Success, the transmit queue is started. 2812 * - -ENODEV: if *port_id* is invalid. 2813 * - -EINVAL: The queue_id out of range or belong to hairpin. 2814 * - -EIO: if device is removed. 2815 * - -ENOTSUP: The function not supported in PMD. 2816 */ 2817 int rte_eth_dev_tx_queue_start(uint16_t port_id, uint16_t tx_queue_id); 2818 2819 /** 2820 * Stop specified Tx queue of a port 2821 * 2822 * @param port_id 2823 * The port identifier of the Ethernet device 2824 * @param tx_queue_id 2825 * The index of the Tx queue to update the ring. 2826 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 2827 * to rte_eth_dev_configure(). 2828 * @return 2829 * - 0: Success, the transmit queue is stopped. 2830 * - -ENODEV: if *port_id* is invalid. 2831 * - -EINVAL: The queue_id out of range or belong to hairpin. 2832 * - -EIO: if device is removed. 2833 * - -ENOTSUP: The function not supported in PMD. 2834 */ 2835 int rte_eth_dev_tx_queue_stop(uint16_t port_id, uint16_t tx_queue_id); 2836 2837 /** 2838 * Start an Ethernet device. 2839 * 2840 * The device start step is the last one and consists of setting the configured 2841 * offload features and in starting the transmit and the receive units of the 2842 * device. 2843 * 2844 * Device RTE_ETH_DEV_NOLIVE_MAC_ADDR flag causes MAC address to be set before 2845 * PMD port start callback function is invoked. 2846 * 2847 * On success, all basic functions exported by the Ethernet API (link status, 2848 * receive/transmit, and so on) can be invoked. 2849 * 2850 * @param port_id 2851 * The port identifier of the Ethernet device. 2852 * @return 2853 * - 0: Success, Ethernet device started. 2854 * - <0: Error code of the driver device start function. 2855 */ 2856 int rte_eth_dev_start(uint16_t port_id); 2857 2858 /** 2859 * Stop an Ethernet device. The device can be restarted with a call to 2860 * rte_eth_dev_start() 2861 * 2862 * @param port_id 2863 * The port identifier of the Ethernet device. 2864 * @return 2865 * - 0: Success, Ethernet device stopped. 2866 * - <0: Error code of the driver device stop function. 2867 */ 2868 int rte_eth_dev_stop(uint16_t port_id); 2869 2870 /** 2871 * Link up an Ethernet device. 2872 * 2873 * Set device link up will re-enable the device Rx/Tx 2874 * functionality after it is previously set device linked down. 2875 * 2876 * @param port_id 2877 * The port identifier of the Ethernet device. 2878 * @return 2879 * - 0: Success, Ethernet device linked up. 2880 * - <0: Error code of the driver device link up function. 2881 */ 2882 int rte_eth_dev_set_link_up(uint16_t port_id); 2883 2884 /** 2885 * Link down an Ethernet device. 2886 * The device Rx/Tx functionality will be disabled if success, 2887 * and it can be re-enabled with a call to 2888 * rte_eth_dev_set_link_up() 2889 * 2890 * @param port_id 2891 * The port identifier of the Ethernet device. 2892 */ 2893 int rte_eth_dev_set_link_down(uint16_t port_id); 2894 2895 /** 2896 * Close a stopped Ethernet device. The device cannot be restarted! 2897 * The function frees all port resources. 2898 * 2899 * @param port_id 2900 * The port identifier of the Ethernet device. 2901 * @return 2902 * - Zero if the port is closed successfully. 2903 * - Negative if something went wrong. 2904 */ 2905 int rte_eth_dev_close(uint16_t port_id); 2906 2907 /** 2908 * Reset a Ethernet device and keep its port ID. 2909 * 2910 * When a port has to be reset passively, the DPDK application can invoke 2911 * this function. For example when a PF is reset, all its VFs should also 2912 * be reset. Normally a DPDK application can invoke this function when 2913 * RTE_ETH_EVENT_INTR_RESET event is detected, but can also use it to start 2914 * a port reset in other circumstances. 2915 * 2916 * When this function is called, it first stops the port and then calls the 2917 * PMD specific dev_uninit( ) and dev_init( ) to return the port to initial 2918 * state, in which no Tx and Rx queues are setup, as if the port has been 2919 * reset and not started. The port keeps the port ID it had before the 2920 * function call. 2921 * 2922 * After calling rte_eth_dev_reset( ), the application should use 2923 * rte_eth_dev_configure( ), rte_eth_rx_queue_setup( ), 2924 * rte_eth_tx_queue_setup( ), and rte_eth_dev_start( ) 2925 * to reconfigure the device as appropriate. 2926 * 2927 * Note: To avoid unexpected behavior, the application should stop calling 2928 * Tx and Rx functions before calling rte_eth_dev_reset( ). For thread 2929 * safety, all these controlling functions should be called from the same 2930 * thread. 2931 * 2932 * @param port_id 2933 * The port identifier of the Ethernet device. 2934 * 2935 * @return 2936 * - (0) if successful. 2937 * - (-ENODEV) if *port_id* is invalid. 2938 * - (-ENOTSUP) if hardware doesn't support this function. 2939 * - (-EPERM) if not ran from the primary process. 2940 * - (-EIO) if re-initialisation failed or device is removed. 2941 * - (-ENOMEM) if the reset failed due to OOM. 2942 * - (-EAGAIN) if the reset temporarily failed and should be retried later. 2943 */ 2944 int rte_eth_dev_reset(uint16_t port_id); 2945 2946 /** 2947 * Enable receipt in promiscuous mode for an Ethernet device. 2948 * 2949 * @param port_id 2950 * The port identifier of the Ethernet device. 2951 * @return 2952 * - (0) if successful. 2953 * - (-ENOTSUP) if support for promiscuous_enable() does not exist 2954 * for the device. 2955 * - (-ENODEV) if *port_id* invalid. 2956 */ 2957 int rte_eth_promiscuous_enable(uint16_t port_id); 2958 2959 /** 2960 * Disable receipt in promiscuous mode for an Ethernet device. 2961 * 2962 * @param port_id 2963 * The port identifier of the Ethernet device. 2964 * @return 2965 * - (0) if successful. 2966 * - (-ENOTSUP) if support for promiscuous_disable() does not exist 2967 * for the device. 2968 * - (-ENODEV) if *port_id* invalid. 2969 */ 2970 int rte_eth_promiscuous_disable(uint16_t port_id); 2971 2972 /** 2973 * Return the value of promiscuous mode for an Ethernet device. 2974 * 2975 * @param port_id 2976 * The port identifier of the Ethernet device. 2977 * @return 2978 * - (1) if promiscuous is enabled 2979 * - (0) if promiscuous is disabled. 2980 * - (-1) on error 2981 */ 2982 int rte_eth_promiscuous_get(uint16_t port_id); 2983 2984 /** 2985 * Enable the receipt of any multicast frame by an Ethernet device. 2986 * 2987 * @param port_id 2988 * The port identifier of the Ethernet device. 2989 * @return 2990 * - (0) if successful. 2991 * - (-ENOTSUP) if support for allmulticast_enable() does not exist 2992 * for the device. 2993 * - (-ENODEV) if *port_id* invalid. 2994 */ 2995 int rte_eth_allmulticast_enable(uint16_t port_id); 2996 2997 /** 2998 * Disable the receipt of all multicast frames by an Ethernet device. 2999 * 3000 * @param port_id 3001 * The port identifier of the Ethernet device. 3002 * @return 3003 * - (0) if successful. 3004 * - (-ENOTSUP) if support for allmulticast_disable() does not exist 3005 * for the device. 3006 * - (-ENODEV) if *port_id* invalid. 3007 */ 3008 int rte_eth_allmulticast_disable(uint16_t port_id); 3009 3010 /** 3011 * Return the value of allmulticast mode for an Ethernet device. 3012 * 3013 * @param port_id 3014 * The port identifier of the Ethernet device. 3015 * @return 3016 * - (1) if allmulticast is enabled 3017 * - (0) if allmulticast is disabled. 3018 * - (-1) on error 3019 */ 3020 int rte_eth_allmulticast_get(uint16_t port_id); 3021 3022 /** 3023 * Retrieve the link status (up/down), the duplex mode (half/full), 3024 * the negotiation (auto/fixed), and if available, the speed (Mbps). 3025 * 3026 * It might need to wait up to 9 seconds. 3027 * @see rte_eth_link_get_nowait. 3028 * 3029 * @param port_id 3030 * The port identifier of the Ethernet device. 3031 * @param link 3032 * Link information written back. 3033 * @return 3034 * - (0) if successful. 3035 * - (-ENOTSUP) if the function is not supported in PMD. 3036 * - (-ENODEV) if *port_id* invalid. 3037 * - (-EINVAL) if bad parameter. 3038 */ 3039 int rte_eth_link_get(uint16_t port_id, struct rte_eth_link *link); 3040 3041 /** 3042 * Retrieve the link status (up/down), the duplex mode (half/full), 3043 * the negotiation (auto/fixed), and if available, the speed (Mbps). 3044 * 3045 * @param port_id 3046 * The port identifier of the Ethernet device. 3047 * @param link 3048 * Link information written back. 3049 * @return 3050 * - (0) if successful. 3051 * - (-ENOTSUP) if the function is not supported in PMD. 3052 * - (-ENODEV) if *port_id* invalid. 3053 * - (-EINVAL) if bad parameter. 3054 */ 3055 int rte_eth_link_get_nowait(uint16_t port_id, struct rte_eth_link *link); 3056 3057 /** 3058 * @warning 3059 * @b EXPERIMENTAL: this API may change without prior notice. 3060 * 3061 * The function converts a link_speed to a string. It handles all special 3062 * values like unknown or none speed. 3063 * 3064 * @param link_speed 3065 * link_speed of rte_eth_link struct 3066 * @return 3067 * Link speed in textual format. It's pointer to immutable memory. 3068 * No free is required. 3069 */ 3070 __rte_experimental 3071 const char *rte_eth_link_speed_to_str(uint32_t link_speed); 3072 3073 /** 3074 * @warning 3075 * @b EXPERIMENTAL: this API may change without prior notice. 3076 * 3077 * The function converts a rte_eth_link struct representing a link status to 3078 * a string. 3079 * 3080 * @param str 3081 * A pointer to a string to be filled with textual representation of 3082 * device status. At least RTE_ETH_LINK_MAX_STR_LEN bytes should be allocated to 3083 * store default link status text. 3084 * @param len 3085 * Length of available memory at 'str' string. 3086 * @param eth_link 3087 * Link status returned by rte_eth_link_get function 3088 * @return 3089 * Number of bytes written to str array or -EINVAL if bad parameter. 3090 */ 3091 __rte_experimental 3092 int rte_eth_link_to_str(char *str, size_t len, 3093 const struct rte_eth_link *eth_link); 3094 3095 /** 3096 * Retrieve the general I/O statistics of an Ethernet device. 3097 * 3098 * @param port_id 3099 * The port identifier of the Ethernet device. 3100 * @param stats 3101 * A pointer to a structure of type *rte_eth_stats* to be filled with 3102 * the values of device counters for the following set of statistics: 3103 * - *ipackets* with the total of successfully received packets. 3104 * - *opackets* with the total of successfully transmitted packets. 3105 * - *ibytes* with the total of successfully received bytes. 3106 * - *obytes* with the total of successfully transmitted bytes. 3107 * - *ierrors* with the total of erroneous received packets. 3108 * - *oerrors* with the total of failed transmitted packets. 3109 * @return 3110 * Zero if successful. Non-zero otherwise. 3111 */ 3112 int rte_eth_stats_get(uint16_t port_id, struct rte_eth_stats *stats); 3113 3114 /** 3115 * Reset the general I/O statistics of an Ethernet device. 3116 * 3117 * @param port_id 3118 * The port identifier of the Ethernet device. 3119 * @return 3120 * - (0) if device notified to reset stats. 3121 * - (-ENOTSUP) if hardware doesn't support. 3122 * - (-ENODEV) if *port_id* invalid. 3123 * - (<0): Error code of the driver stats reset function. 3124 */ 3125 int rte_eth_stats_reset(uint16_t port_id); 3126 3127 /** 3128 * Retrieve names of extended statistics of an Ethernet device. 3129 * 3130 * There is an assumption that 'xstat_names' and 'xstats' arrays are matched 3131 * by array index: 3132 * xstats_names[i].name => xstats[i].value 3133 * 3134 * And the array index is same with id field of 'struct rte_eth_xstat': 3135 * xstats[i].id == i 3136 * 3137 * This assumption makes key-value pair matching less flexible but simpler. 3138 * 3139 * @param port_id 3140 * The port identifier of the Ethernet device. 3141 * @param xstats_names 3142 * An rte_eth_xstat_name array of at least *size* elements to 3143 * be filled. If set to NULL, the function returns the required number 3144 * of elements. 3145 * @param size 3146 * The size of the xstats_names array (number of elements). 3147 * @return 3148 * - A positive value lower or equal to size: success. The return value 3149 * is the number of entries filled in the stats table. 3150 * - A positive value higher than size: error, the given statistics table 3151 * is too small. The return value corresponds to the size that should 3152 * be given to succeed. The entries in the table are not valid and 3153 * shall not be used by the caller. 3154 * - A negative value on error (invalid port ID). 3155 */ 3156 int rte_eth_xstats_get_names(uint16_t port_id, 3157 struct rte_eth_xstat_name *xstats_names, 3158 unsigned int size); 3159 3160 /** 3161 * Retrieve extended statistics of an Ethernet device. 3162 * 3163 * There is an assumption that 'xstat_names' and 'xstats' arrays are matched 3164 * by array index: 3165 * xstats_names[i].name => xstats[i].value 3166 * 3167 * And the array index is same with id field of 'struct rte_eth_xstat': 3168 * xstats[i].id == i 3169 * 3170 * This assumption makes key-value pair matching less flexible but simpler. 3171 * 3172 * @param port_id 3173 * The port identifier of the Ethernet device. 3174 * @param xstats 3175 * A pointer to a table of structure of type *rte_eth_xstat* 3176 * to be filled with device statistics ids and values. 3177 * This parameter can be set to NULL if n is 0. 3178 * @param n 3179 * The size of the xstats array (number of elements). 3180 * @return 3181 * - A positive value lower or equal to n: success. The return value 3182 * is the number of entries filled in the stats table. 3183 * - A positive value higher than n: error, the given statistics table 3184 * is too small. The return value corresponds to the size that should 3185 * be given to succeed. The entries in the table are not valid and 3186 * shall not be used by the caller. 3187 * - A negative value on error (invalid port ID). 3188 */ 3189 int rte_eth_xstats_get(uint16_t port_id, struct rte_eth_xstat *xstats, 3190 unsigned int n); 3191 3192 /** 3193 * Retrieve names of extended statistics of an Ethernet device. 3194 * 3195 * @param port_id 3196 * The port identifier of the Ethernet device. 3197 * @param xstats_names 3198 * Array to be filled in with names of requested device statistics. 3199 * Must not be NULL if @p ids are specified (not NULL). 3200 * @param size 3201 * Number of elements in @p xstats_names array (if not NULL) and in 3202 * @p ids array (if not NULL). Must be 0 if both array pointers are NULL. 3203 * @param ids 3204 * IDs array given by app to retrieve specific statistics. May be NULL to 3205 * retrieve names of all available statistics or, if @p xstats_names is 3206 * NULL as well, just the number of available statistics. 3207 * @return 3208 * - A positive value lower or equal to size: success. The return value 3209 * is the number of entries filled in the stats table. 3210 * - A positive value higher than size: success. The given statistics table 3211 * is too small. The return value corresponds to the size that should 3212 * be given to succeed. The entries in the table are not valid and 3213 * shall not be used by the caller. 3214 * - A negative value on error. 3215 */ 3216 int 3217 rte_eth_xstats_get_names_by_id(uint16_t port_id, 3218 struct rte_eth_xstat_name *xstats_names, unsigned int size, 3219 uint64_t *ids); 3220 3221 /** 3222 * Retrieve extended statistics of an Ethernet device. 3223 * 3224 * @param port_id 3225 * The port identifier of the Ethernet device. 3226 * @param ids 3227 * IDs array given by app to retrieve specific statistics. May be NULL to 3228 * retrieve all available statistics or, if @p values is NULL as well, 3229 * just the number of available statistics. 3230 * @param values 3231 * Array to be filled in with requested device statistics. 3232 * Must not be NULL if ids are specified (not NULL). 3233 * @param size 3234 * Number of elements in @p values array (if not NULL) and in @p ids 3235 * array (if not NULL). Must be 0 if both array pointers are NULL. 3236 * @return 3237 * - A positive value lower or equal to size: success. The return value 3238 * is the number of entries filled in the stats table. 3239 * - A positive value higher than size: success: The given statistics table 3240 * is too small. The return value corresponds to the size that should 3241 * be given to succeed. The entries in the table are not valid and 3242 * shall not be used by the caller. 3243 * - A negative value on error. 3244 */ 3245 int rte_eth_xstats_get_by_id(uint16_t port_id, const uint64_t *ids, 3246 uint64_t *values, unsigned int size); 3247 3248 /** 3249 * Gets the ID of a statistic from its name. 3250 * 3251 * This function searches for the statistics using string compares, and 3252 * as such should not be used on the fast-path. For fast-path retrieval of 3253 * specific statistics, store the ID as provided in *id* from this function, 3254 * and pass the ID to rte_eth_xstats_get() 3255 * 3256 * @param port_id The port to look up statistics from 3257 * @param xstat_name The name of the statistic to return 3258 * @param[out] id A pointer to an app-supplied uint64_t which should be 3259 * set to the ID of the stat if the stat exists. 3260 * @return 3261 * 0 on success 3262 * -ENODEV for invalid port_id, 3263 * -EIO if device is removed, 3264 * -EINVAL if the xstat_name doesn't exist in port_id 3265 * -ENOMEM if bad parameter. 3266 */ 3267 int rte_eth_xstats_get_id_by_name(uint16_t port_id, const char *xstat_name, 3268 uint64_t *id); 3269 3270 /** 3271 * Reset extended statistics of an Ethernet device. 3272 * 3273 * @param port_id 3274 * The port identifier of the Ethernet device. 3275 * @return 3276 * - (0) if device notified to reset extended stats. 3277 * - (-ENOTSUP) if pmd doesn't support both 3278 * extended stats and basic stats reset. 3279 * - (-ENODEV) if *port_id* invalid. 3280 * - (<0): Error code of the driver xstats reset function. 3281 */ 3282 int rte_eth_xstats_reset(uint16_t port_id); 3283 3284 /** 3285 * Set a mapping for the specified transmit queue to the specified per-queue 3286 * statistics counter. 3287 * 3288 * @param port_id 3289 * The port identifier of the Ethernet device. 3290 * @param tx_queue_id 3291 * The index of the transmit queue for which a queue stats mapping is required. 3292 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 3293 * to rte_eth_dev_configure(). 3294 * @param stat_idx 3295 * The per-queue packet statistics functionality number that the transmit 3296 * queue is to be assigned. 3297 * The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1]. 3298 * Max RTE_ETHDEV_QUEUE_STAT_CNTRS being 256. 3299 * @return 3300 * Zero if successful. Non-zero otherwise. 3301 */ 3302 int rte_eth_dev_set_tx_queue_stats_mapping(uint16_t port_id, 3303 uint16_t tx_queue_id, uint8_t stat_idx); 3304 3305 /** 3306 * Set a mapping for the specified receive queue to the specified per-queue 3307 * statistics counter. 3308 * 3309 * @param port_id 3310 * The port identifier of the Ethernet device. 3311 * @param rx_queue_id 3312 * The index of the receive queue for which a queue stats mapping is required. 3313 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 3314 * to rte_eth_dev_configure(). 3315 * @param stat_idx 3316 * The per-queue packet statistics functionality number that the receive 3317 * queue is to be assigned. 3318 * The value must be in the range [0, RTE_ETHDEV_QUEUE_STAT_CNTRS - 1]. 3319 * Max RTE_ETHDEV_QUEUE_STAT_CNTRS being 256. 3320 * @return 3321 * Zero if successful. Non-zero otherwise. 3322 */ 3323 int rte_eth_dev_set_rx_queue_stats_mapping(uint16_t port_id, 3324 uint16_t rx_queue_id, 3325 uint8_t stat_idx); 3326 3327 /** 3328 * Retrieve the Ethernet address of an Ethernet device. 3329 * 3330 * @param port_id 3331 * The port identifier of the Ethernet device. 3332 * @param mac_addr 3333 * A pointer to a structure of type *ether_addr* to be filled with 3334 * the Ethernet address of the Ethernet device. 3335 * @return 3336 * - (0) if successful 3337 * - (-ENODEV) if *port_id* invalid. 3338 * - (-EINVAL) if bad parameter. 3339 */ 3340 int rte_eth_macaddr_get(uint16_t port_id, struct rte_ether_addr *mac_addr); 3341 3342 /** 3343 * @warning 3344 * @b EXPERIMENTAL: this API may change without prior notice 3345 * 3346 * Retrieve the Ethernet addresses of an Ethernet device. 3347 * 3348 * @param port_id 3349 * The port identifier of the Ethernet device. 3350 * @param ma 3351 * A pointer to an array of structures of type *ether_addr* to be filled with 3352 * the Ethernet addresses of the Ethernet device. 3353 * @param num 3354 * Number of elements in the @p ma array. 3355 * Note that rte_eth_dev_info::max_mac_addrs can be used to retrieve 3356 * max number of Ethernet addresses for given port. 3357 * @return 3358 * - number of retrieved addresses if successful 3359 * - (-ENODEV) if *port_id* invalid. 3360 * - (-EINVAL) if bad parameter. 3361 */ 3362 __rte_experimental 3363 int rte_eth_macaddrs_get(uint16_t port_id, struct rte_ether_addr *ma, 3364 unsigned int num); 3365 3366 /** 3367 * Retrieve the contextual information of an Ethernet device. 3368 * 3369 * As part of this function, a number of of fields in dev_info will be 3370 * initialized as follows: 3371 * 3372 * rx_desc_lim = lim 3373 * tx_desc_lim = lim 3374 * 3375 * Where lim is defined within the rte_eth_dev_info_get as 3376 * 3377 * const struct rte_eth_desc_lim lim = { 3378 * .nb_max = UINT16_MAX, 3379 * .nb_min = 0, 3380 * .nb_align = 1, 3381 * .nb_seg_max = UINT16_MAX, 3382 * .nb_mtu_seg_max = UINT16_MAX, 3383 * }; 3384 * 3385 * device = dev->device 3386 * min_mtu = RTE_ETHER_MIN_LEN - RTE_ETHER_HDR_LEN - RTE_ETHER_CRC_LEN 3387 * max_mtu = UINT16_MAX 3388 * 3389 * The following fields will be populated if support for dev_infos_get() 3390 * exists for the device and the rte_eth_dev 'dev' has been populated 3391 * successfully with a call to it: 3392 * 3393 * driver_name = dev->device->driver->name 3394 * nb_rx_queues = dev->data->nb_rx_queues 3395 * nb_tx_queues = dev->data->nb_tx_queues 3396 * dev_flags = &dev->data->dev_flags 3397 * 3398 * @param port_id 3399 * The port identifier of the Ethernet device. 3400 * @param dev_info 3401 * A pointer to a structure of type *rte_eth_dev_info* to be filled with 3402 * the contextual information of the Ethernet device. 3403 * @return 3404 * - (0) if successful. 3405 * - (-ENOTSUP) if support for dev_infos_get() does not exist for the device. 3406 * - (-ENODEV) if *port_id* invalid. 3407 * - (-EINVAL) if bad parameter. 3408 */ 3409 int rte_eth_dev_info_get(uint16_t port_id, struct rte_eth_dev_info *dev_info); 3410 3411 /** 3412 * @warning 3413 * @b EXPERIMENTAL: this API may change without prior notice. 3414 * 3415 * Retrieve the configuration of an Ethernet device. 3416 * 3417 * @param port_id 3418 * The port identifier of the Ethernet device. 3419 * @param dev_conf 3420 * Location for Ethernet device configuration to be filled in. 3421 * @return 3422 * - (0) if successful. 3423 * - (-ENODEV) if *port_id* invalid. 3424 * - (-EINVAL) if bad parameter. 3425 */ 3426 __rte_experimental 3427 int rte_eth_dev_conf_get(uint16_t port_id, struct rte_eth_conf *dev_conf); 3428 3429 /** 3430 * Retrieve the firmware version of a device. 3431 * 3432 * @param port_id 3433 * The port identifier of the device. 3434 * @param fw_version 3435 * A pointer to a string array storing the firmware version of a device, 3436 * the string includes terminating null. This pointer is allocated by caller. 3437 * @param fw_size 3438 * The size of the string array pointed by fw_version, which should be 3439 * large enough to store firmware version of the device. 3440 * @return 3441 * - (0) if successful. 3442 * - (-ENOTSUP) if operation is not supported. 3443 * - (-ENODEV) if *port_id* invalid. 3444 * - (-EIO) if device is removed. 3445 * - (-EINVAL) if bad parameter. 3446 * - (>0) if *fw_size* is not enough to store firmware version, return 3447 * the size of the non truncated string. 3448 */ 3449 int rte_eth_dev_fw_version_get(uint16_t port_id, 3450 char *fw_version, size_t fw_size); 3451 3452 /** 3453 * Retrieve the supported packet types of an Ethernet device. 3454 * 3455 * When a packet type is announced as supported, it *must* be recognized by 3456 * the PMD. For instance, if RTE_PTYPE_L2_ETHER, RTE_PTYPE_L2_ETHER_VLAN 3457 * and RTE_PTYPE_L3_IPV4 are announced, the PMD must return the following 3458 * packet types for these packets: 3459 * - Ether/IPv4 -> RTE_PTYPE_L2_ETHER | RTE_PTYPE_L3_IPV4 3460 * - Ether/VLAN/IPv4 -> RTE_PTYPE_L2_ETHER_VLAN | RTE_PTYPE_L3_IPV4 3461 * - Ether/[anything else] -> RTE_PTYPE_L2_ETHER 3462 * - Ether/VLAN/[anything else] -> RTE_PTYPE_L2_ETHER_VLAN 3463 * 3464 * When a packet is received by a PMD, the most precise type must be 3465 * returned among the ones supported. However a PMD is allowed to set 3466 * packet type that is not in the supported list, at the condition that it 3467 * is more precise. Therefore, a PMD announcing no supported packet types 3468 * can still set a matching packet type in a received packet. 3469 * 3470 * @note 3471 * Better to invoke this API after the device is already started or Rx burst 3472 * function is decided, to obtain correct supported ptypes. 3473 * @note 3474 * if a given PMD does not report what ptypes it supports, then the supported 3475 * ptype count is reported as 0. 3476 * @param port_id 3477 * The port identifier of the Ethernet device. 3478 * @param ptype_mask 3479 * A hint of what kind of packet type which the caller is interested in. 3480 * @param ptypes 3481 * An array pointer to store adequate packet types, allocated by caller. 3482 * @param num 3483 * Size of the array pointed by param ptypes. 3484 * @return 3485 * - (>=0) Number of supported ptypes. If the number of types exceeds num, 3486 * only num entries will be filled into the ptypes array, but the full 3487 * count of supported ptypes will be returned. 3488 * - (-ENODEV) if *port_id* invalid. 3489 * - (-EINVAL) if bad parameter. 3490 */ 3491 int rte_eth_dev_get_supported_ptypes(uint16_t port_id, uint32_t ptype_mask, 3492 uint32_t *ptypes, int num); 3493 /** 3494 * Inform Ethernet device about reduced range of packet types to handle. 3495 * 3496 * Application can use this function to set only specific ptypes that it's 3497 * interested. This information can be used by the PMD to optimize Rx path. 3498 * 3499 * The function accepts an array `set_ptypes` allocated by the caller to 3500 * store the packet types set by the driver, the last element of the array 3501 * is set to RTE_PTYPE_UNKNOWN. The size of the `set_ptype` array should be 3502 * `rte_eth_dev_get_supported_ptypes() + 1` else it might only be filled 3503 * partially. 3504 * 3505 * @param port_id 3506 * The port identifier of the Ethernet device. 3507 * @param ptype_mask 3508 * The ptype family that application is interested in should be bitwise OR of 3509 * RTE_PTYPE_*_MASK or 0. 3510 * @param set_ptypes 3511 * An array pointer to store set packet types, allocated by caller. The 3512 * function marks the end of array with RTE_PTYPE_UNKNOWN. 3513 * @param num 3514 * Size of the array pointed by param ptypes. 3515 * Should be rte_eth_dev_get_supported_ptypes() + 1 to accommodate the 3516 * set ptypes. 3517 * @return 3518 * - (0) if Success. 3519 * - (-ENODEV) if *port_id* invalid. 3520 * - (-EINVAL) if *ptype_mask* is invalid (or) set_ptypes is NULL and 3521 * num > 0. 3522 */ 3523 int rte_eth_dev_set_ptypes(uint16_t port_id, uint32_t ptype_mask, 3524 uint32_t *set_ptypes, unsigned int num); 3525 3526 /** 3527 * Retrieve the MTU of an Ethernet device. 3528 * 3529 * @param port_id 3530 * The port identifier of the Ethernet device. 3531 * @param mtu 3532 * A pointer to a uint16_t where the retrieved MTU is to be stored. 3533 * @return 3534 * - (0) if successful. 3535 * - (-ENODEV) if *port_id* invalid. 3536 * - (-EINVAL) if bad parameter. 3537 */ 3538 int rte_eth_dev_get_mtu(uint16_t port_id, uint16_t *mtu); 3539 3540 /** 3541 * Change the MTU of an Ethernet device. 3542 * 3543 * @param port_id 3544 * The port identifier of the Ethernet device. 3545 * @param mtu 3546 * A uint16_t for the MTU to be applied. 3547 * @return 3548 * - (0) if successful. 3549 * - (-ENOTSUP) if operation is not supported. 3550 * - (-ENODEV) if *port_id* invalid. 3551 * - (-EIO) if device is removed. 3552 * - (-EINVAL) if *mtu* invalid, validation of mtu can occur within 3553 * rte_eth_dev_set_mtu if dev_infos_get is supported by the device or 3554 * when the mtu is set using dev->dev_ops->mtu_set. 3555 * - (-EBUSY) if operation is not allowed when the port is running 3556 */ 3557 int rte_eth_dev_set_mtu(uint16_t port_id, uint16_t mtu); 3558 3559 /** 3560 * Enable/Disable hardware filtering by an Ethernet device of received 3561 * VLAN packets tagged with a given VLAN Tag Identifier. 3562 * 3563 * @param port_id 3564 * The port identifier of the Ethernet device. 3565 * @param vlan_id 3566 * The VLAN Tag Identifier whose filtering must be enabled or disabled. 3567 * @param on 3568 * If > 0, enable VLAN filtering of VLAN packets tagged with *vlan_id*. 3569 * Otherwise, disable VLAN filtering of VLAN packets tagged with *vlan_id*. 3570 * @return 3571 * - (0) if successful. 3572 * - (-ENOTSUP) if hardware-assisted VLAN filtering not configured. 3573 * - (-ENODEV) if *port_id* invalid. 3574 * - (-EIO) if device is removed. 3575 * - (-ENOSYS) if VLAN filtering on *port_id* disabled. 3576 * - (-EINVAL) if *vlan_id* > 4095. 3577 */ 3578 int rte_eth_dev_vlan_filter(uint16_t port_id, uint16_t vlan_id, int on); 3579 3580 /** 3581 * Enable/Disable hardware VLAN Strip by a Rx queue of an Ethernet device. 3582 * 3583 * @param port_id 3584 * The port identifier of the Ethernet device. 3585 * @param rx_queue_id 3586 * The index of the receive queue for which a queue stats mapping is required. 3587 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 3588 * to rte_eth_dev_configure(). 3589 * @param on 3590 * If 1, Enable VLAN Stripping of the receive queue of the Ethernet port. 3591 * If 0, Disable VLAN Stripping of the receive queue of the Ethernet port. 3592 * @return 3593 * - (0) if successful. 3594 * - (-ENOTSUP) if hardware-assisted VLAN stripping not configured. 3595 * - (-ENODEV) if *port_id* invalid. 3596 * - (-EINVAL) if *rx_queue_id* invalid. 3597 */ 3598 int rte_eth_dev_set_vlan_strip_on_queue(uint16_t port_id, uint16_t rx_queue_id, 3599 int on); 3600 3601 /** 3602 * Set the Outer VLAN Ether Type by an Ethernet device, it can be inserted to 3603 * the VLAN header. 3604 * 3605 * @param port_id 3606 * The port identifier of the Ethernet device. 3607 * @param vlan_type 3608 * The VLAN type. 3609 * @param tag_type 3610 * The Tag Protocol ID 3611 * @return 3612 * - (0) if successful. 3613 * - (-ENOTSUP) if hardware-assisted VLAN TPID setup is not supported. 3614 * - (-ENODEV) if *port_id* invalid. 3615 * - (-EIO) if device is removed. 3616 */ 3617 int rte_eth_dev_set_vlan_ether_type(uint16_t port_id, 3618 enum rte_vlan_type vlan_type, 3619 uint16_t tag_type); 3620 3621 /** 3622 * Set VLAN offload configuration on an Ethernet device. 3623 * 3624 * @param port_id 3625 * The port identifier of the Ethernet device. 3626 * @param offload_mask 3627 * The VLAN Offload bit mask can be mixed use with "OR" 3628 * RTE_ETH_VLAN_STRIP_OFFLOAD 3629 * RTE_ETH_VLAN_FILTER_OFFLOAD 3630 * RTE_ETH_VLAN_EXTEND_OFFLOAD 3631 * RTE_ETH_QINQ_STRIP_OFFLOAD 3632 * @return 3633 * - (0) if successful. 3634 * - (-ENOTSUP) if hardware-assisted VLAN filtering not configured. 3635 * - (-ENODEV) if *port_id* invalid. 3636 * - (-EIO) if device is removed. 3637 */ 3638 int rte_eth_dev_set_vlan_offload(uint16_t port_id, int offload_mask); 3639 3640 /** 3641 * Read VLAN Offload configuration from an Ethernet device 3642 * 3643 * @param port_id 3644 * The port identifier of the Ethernet device. 3645 * @return 3646 * - (>0) if successful. Bit mask to indicate 3647 * RTE_ETH_VLAN_STRIP_OFFLOAD 3648 * RTE_ETH_VLAN_FILTER_OFFLOAD 3649 * RTE_ETH_VLAN_EXTEND_OFFLOAD 3650 * RTE_ETH_QINQ_STRIP_OFFLOAD 3651 * - (-ENODEV) if *port_id* invalid. 3652 */ 3653 int rte_eth_dev_get_vlan_offload(uint16_t port_id); 3654 3655 /** 3656 * Set port based Tx VLAN insertion on or off. 3657 * 3658 * @param port_id 3659 * The port identifier of the Ethernet device. 3660 * @param pvid 3661 * Port based Tx VLAN identifier together with user priority. 3662 * @param on 3663 * Turn on or off the port based Tx VLAN insertion. 3664 * 3665 * @return 3666 * - (0) if successful. 3667 * - negative if failed. 3668 */ 3669 int rte_eth_dev_set_vlan_pvid(uint16_t port_id, uint16_t pvid, int on); 3670 3671 typedef void (*buffer_tx_error_fn)(struct rte_mbuf **unsent, uint16_t count, 3672 void *userdata); 3673 3674 /** 3675 * Structure used to buffer packets for future Tx 3676 * Used by APIs rte_eth_tx_buffer and rte_eth_tx_buffer_flush 3677 */ 3678 struct rte_eth_dev_tx_buffer { 3679 buffer_tx_error_fn error_callback; 3680 void *error_userdata; 3681 uint16_t size; /**< Size of buffer for buffered Tx */ 3682 uint16_t length; /**< Number of packets in the array */ 3683 /** Pending packets to be sent on explicit flush or when full */ 3684 struct rte_mbuf *pkts[]; 3685 }; 3686 3687 /** 3688 * Calculate the size of the Tx buffer. 3689 * 3690 * @param sz 3691 * Number of stored packets. 3692 */ 3693 #define RTE_ETH_TX_BUFFER_SIZE(sz) \ 3694 (sizeof(struct rte_eth_dev_tx_buffer) + (sz) * sizeof(struct rte_mbuf *)) 3695 3696 /** 3697 * Initialize default values for buffered transmitting 3698 * 3699 * @param buffer 3700 * Tx buffer to be initialized. 3701 * @param size 3702 * Buffer size 3703 * @return 3704 * 0 if no error 3705 */ 3706 int 3707 rte_eth_tx_buffer_init(struct rte_eth_dev_tx_buffer *buffer, uint16_t size); 3708 3709 /** 3710 * Configure a callback for buffered packets which cannot be sent 3711 * 3712 * Register a specific callback to be called when an attempt is made to send 3713 * all packets buffered on an Ethernet port, but not all packets can 3714 * successfully be sent. The callback registered here will be called only 3715 * from calls to rte_eth_tx_buffer() and rte_eth_tx_buffer_flush() APIs. 3716 * The default callback configured for each queue by default just frees the 3717 * packets back to the calling mempool. If additional behaviour is required, 3718 * for example, to count dropped packets, or to retry transmission of packets 3719 * which cannot be sent, this function should be used to register a suitable 3720 * callback function to implement the desired behaviour. 3721 * The example callback "rte_eth_count_unsent_packet_callback()" is also 3722 * provided as reference. 3723 * 3724 * @param buffer 3725 * The port identifier of the Ethernet device. 3726 * @param callback 3727 * The function to be used as the callback. 3728 * @param userdata 3729 * Arbitrary parameter to be passed to the callback function 3730 * @return 3731 * 0 on success, or -EINVAL if bad parameter 3732 */ 3733 int 3734 rte_eth_tx_buffer_set_err_callback(struct rte_eth_dev_tx_buffer *buffer, 3735 buffer_tx_error_fn callback, void *userdata); 3736 3737 /** 3738 * Callback function for silently dropping unsent buffered packets. 3739 * 3740 * This function can be passed to rte_eth_tx_buffer_set_err_callback() to 3741 * adjust the default behavior when buffered packets cannot be sent. This 3742 * function drops any unsent packets silently and is used by Tx buffered 3743 * operations as default behavior. 3744 * 3745 * NOTE: this function should not be called directly, instead it should be used 3746 * as a callback for packet buffering. 3747 * 3748 * NOTE: when configuring this function as a callback with 3749 * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter 3750 * should point to an uint64_t value. 3751 * 3752 * @param pkts 3753 * The previously buffered packets which could not be sent 3754 * @param unsent 3755 * The number of unsent packets in the pkts array 3756 * @param userdata 3757 * Not used 3758 */ 3759 void 3760 rte_eth_tx_buffer_drop_callback(struct rte_mbuf **pkts, uint16_t unsent, 3761 void *userdata); 3762 3763 /** 3764 * Callback function for tracking unsent buffered packets. 3765 * 3766 * This function can be passed to rte_eth_tx_buffer_set_err_callback() to 3767 * adjust the default behavior when buffered packets cannot be sent. This 3768 * function drops any unsent packets, but also updates a user-supplied counter 3769 * to track the overall number of packets dropped. The counter should be an 3770 * uint64_t variable. 3771 * 3772 * NOTE: this function should not be called directly, instead it should be used 3773 * as a callback for packet buffering. 3774 * 3775 * NOTE: when configuring this function as a callback with 3776 * rte_eth_tx_buffer_set_err_callback(), the final, userdata parameter 3777 * should point to an uint64_t value. 3778 * 3779 * @param pkts 3780 * The previously buffered packets which could not be sent 3781 * @param unsent 3782 * The number of unsent packets in the pkts array 3783 * @param userdata 3784 * Pointer to an uint64_t value, which will be incremented by unsent 3785 */ 3786 void 3787 rte_eth_tx_buffer_count_callback(struct rte_mbuf **pkts, uint16_t unsent, 3788 void *userdata); 3789 3790 /** 3791 * Request the driver to free mbufs currently cached by the driver. The 3792 * driver will only free the mbuf if it is no longer in use. It is the 3793 * application's responsibility to ensure rte_eth_tx_buffer_flush(..) is 3794 * called if needed. 3795 * 3796 * @param port_id 3797 * The port identifier of the Ethernet device. 3798 * @param queue_id 3799 * The index of the transmit queue through which output packets must be 3800 * sent. 3801 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 3802 * to rte_eth_dev_configure(). 3803 * @param free_cnt 3804 * Maximum number of packets to free. Use 0 to indicate all possible packets 3805 * should be freed. Note that a packet may be using multiple mbufs. 3806 * @return 3807 * Failure: < 0 3808 * -ENODEV: Invalid interface 3809 * -EIO: device is removed 3810 * -ENOTSUP: Driver does not support function 3811 * Success: >= 0 3812 * 0-n: Number of packets freed. More packets may still remain in ring that 3813 * are in use. 3814 */ 3815 int 3816 rte_eth_tx_done_cleanup(uint16_t port_id, uint16_t queue_id, uint32_t free_cnt); 3817 3818 /** 3819 * Subtypes for IPsec offload event(@ref RTE_ETH_EVENT_IPSEC) raised by 3820 * eth device. 3821 */ 3822 enum rte_eth_event_ipsec_subtype { 3823 /** Unknown event type */ 3824 RTE_ETH_EVENT_IPSEC_UNKNOWN = 0, 3825 /** Sequence number overflow */ 3826 RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW, 3827 /** Soft time expiry of SA */ 3828 RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY, 3829 /** Soft byte expiry of SA */ 3830 RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY, 3831 /** Max value of this enum */ 3832 RTE_ETH_EVENT_IPSEC_MAX 3833 }; 3834 3835 /** 3836 * Descriptor for @ref RTE_ETH_EVENT_IPSEC event. Used by eth dev to send extra 3837 * information of the IPsec offload event. 3838 */ 3839 struct rte_eth_event_ipsec_desc { 3840 /** Type of RTE_ETH_EVENT_IPSEC_* event */ 3841 enum rte_eth_event_ipsec_subtype subtype; 3842 /** 3843 * Event specific metadata. 3844 * 3845 * For the following events, *userdata* registered 3846 * with the *rte_security_session* would be returned 3847 * as metadata, 3848 * 3849 * - @ref RTE_ETH_EVENT_IPSEC_ESN_OVERFLOW 3850 * - @ref RTE_ETH_EVENT_IPSEC_SA_TIME_EXPIRY 3851 * - @ref RTE_ETH_EVENT_IPSEC_SA_BYTE_EXPIRY 3852 * 3853 * @see struct rte_security_session_conf 3854 * 3855 */ 3856 uint64_t metadata; 3857 }; 3858 3859 /** 3860 * The eth device event type for interrupt, and maybe others in the future. 3861 */ 3862 enum rte_eth_event_type { 3863 RTE_ETH_EVENT_UNKNOWN, /**< unknown event type */ 3864 RTE_ETH_EVENT_INTR_LSC, /**< lsc interrupt event */ 3865 /** queue state event (enabled/disabled) */ 3866 RTE_ETH_EVENT_QUEUE_STATE, 3867 /** reset interrupt event, sent to VF on PF reset */ 3868 RTE_ETH_EVENT_INTR_RESET, 3869 RTE_ETH_EVENT_VF_MBOX, /**< message from the VF received by PF */ 3870 RTE_ETH_EVENT_MACSEC, /**< MACsec offload related event */ 3871 RTE_ETH_EVENT_INTR_RMV, /**< device removal event */ 3872 RTE_ETH_EVENT_NEW, /**< port is probed */ 3873 RTE_ETH_EVENT_DESTROY, /**< port is released */ 3874 RTE_ETH_EVENT_IPSEC, /**< IPsec offload related event */ 3875 RTE_ETH_EVENT_FLOW_AGED,/**< New aged-out flows is detected */ 3876 RTE_ETH_EVENT_MAX /**< max value of this enum */ 3877 }; 3878 3879 /** User application callback to be registered for interrupts. */ 3880 typedef int (*rte_eth_dev_cb_fn)(uint16_t port_id, 3881 enum rte_eth_event_type event, void *cb_arg, void *ret_param); 3882 3883 /** 3884 * Register a callback function for port event. 3885 * 3886 * @param port_id 3887 * Port ID. 3888 * RTE_ETH_ALL means register the event for all port ids. 3889 * @param event 3890 * Event interested. 3891 * @param cb_fn 3892 * User supplied callback function to be called. 3893 * @param cb_arg 3894 * Pointer to the parameters for the registered callback. 3895 * 3896 * @return 3897 * - On success, zero. 3898 * - On failure, a negative value. 3899 */ 3900 int rte_eth_dev_callback_register(uint16_t port_id, 3901 enum rte_eth_event_type event, 3902 rte_eth_dev_cb_fn cb_fn, void *cb_arg); 3903 3904 /** 3905 * Unregister a callback function for port event. 3906 * 3907 * @param port_id 3908 * Port ID. 3909 * RTE_ETH_ALL means unregister the event for all port ids. 3910 * @param event 3911 * Event interested. 3912 * @param cb_fn 3913 * User supplied callback function to be called. 3914 * @param cb_arg 3915 * Pointer to the parameters for the registered callback. -1 means to 3916 * remove all for the same callback address and same event. 3917 * 3918 * @return 3919 * - On success, zero. 3920 * - On failure, a negative value. 3921 */ 3922 int rte_eth_dev_callback_unregister(uint16_t port_id, 3923 enum rte_eth_event_type event, 3924 rte_eth_dev_cb_fn cb_fn, void *cb_arg); 3925 3926 /** 3927 * When there is no Rx packet coming in Rx Queue for a long time, we can 3928 * sleep lcore related to Rx Queue for power saving, and enable Rx interrupt 3929 * to be triggered when Rx packet arrives. 3930 * 3931 * The rte_eth_dev_rx_intr_enable() function enables Rx queue 3932 * interrupt on specific Rx queue of a port. 3933 * 3934 * @param port_id 3935 * The port identifier of the Ethernet device. 3936 * @param queue_id 3937 * The index of the receive queue from which to retrieve input packets. 3938 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 3939 * to rte_eth_dev_configure(). 3940 * @return 3941 * - (0) if successful. 3942 * - (-ENOTSUP) if underlying hardware OR driver doesn't support 3943 * that operation. 3944 * - (-ENODEV) if *port_id* invalid. 3945 * - (-EIO) if device is removed. 3946 */ 3947 int rte_eth_dev_rx_intr_enable(uint16_t port_id, uint16_t queue_id); 3948 3949 /** 3950 * When lcore wakes up from Rx interrupt indicating packet coming, disable Rx 3951 * interrupt and returns to polling mode. 3952 * 3953 * The rte_eth_dev_rx_intr_disable() function disables Rx queue 3954 * interrupt on specific Rx queue of a port. 3955 * 3956 * @param port_id 3957 * The port identifier of the Ethernet device. 3958 * @param queue_id 3959 * The index of the receive queue from which to retrieve input packets. 3960 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 3961 * to rte_eth_dev_configure(). 3962 * @return 3963 * - (0) if successful. 3964 * - (-ENOTSUP) if underlying hardware OR driver doesn't support 3965 * that operation. 3966 * - (-ENODEV) if *port_id* invalid. 3967 * - (-EIO) if device is removed. 3968 */ 3969 int rte_eth_dev_rx_intr_disable(uint16_t port_id, uint16_t queue_id); 3970 3971 /** 3972 * Rx Interrupt control per port. 3973 * 3974 * @param port_id 3975 * The port identifier of the Ethernet device. 3976 * @param epfd 3977 * Epoll instance fd which the intr vector associated to. 3978 * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. 3979 * @param op 3980 * The operation be performed for the vector. 3981 * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. 3982 * @param data 3983 * User raw data. 3984 * @return 3985 * - On success, zero. 3986 * - On failure, a negative value. 3987 */ 3988 int rte_eth_dev_rx_intr_ctl(uint16_t port_id, int epfd, int op, void *data); 3989 3990 /** 3991 * Rx Interrupt control per queue. 3992 * 3993 * @param port_id 3994 * The port identifier of the Ethernet device. 3995 * @param queue_id 3996 * The index of the receive queue from which to retrieve input packets. 3997 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 3998 * to rte_eth_dev_configure(). 3999 * @param epfd 4000 * Epoll instance fd which the intr vector associated to. 4001 * Using RTE_EPOLL_PER_THREAD allows to use per thread epoll instance. 4002 * @param op 4003 * The operation be performed for the vector. 4004 * Operation type of {RTE_INTR_EVENT_ADD, RTE_INTR_EVENT_DEL}. 4005 * @param data 4006 * User raw data. 4007 * @return 4008 * - On success, zero. 4009 * - On failure, a negative value. 4010 */ 4011 int rte_eth_dev_rx_intr_ctl_q(uint16_t port_id, uint16_t queue_id, 4012 int epfd, int op, void *data); 4013 4014 /** 4015 * Get interrupt fd per Rx queue. 4016 * 4017 * @param port_id 4018 * The port identifier of the Ethernet device. 4019 * @param queue_id 4020 * The index of the receive queue from which to retrieve input packets. 4021 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 4022 * to rte_eth_dev_configure(). 4023 * @return 4024 * - (>=0) the interrupt fd associated to the requested Rx queue if 4025 * successful. 4026 * - (-1) on error. 4027 */ 4028 int 4029 rte_eth_dev_rx_intr_ctl_q_get_fd(uint16_t port_id, uint16_t queue_id); 4030 4031 /** 4032 * Turn on the LED on the Ethernet device. 4033 * This function turns on the LED on the Ethernet device. 4034 * 4035 * @param port_id 4036 * The port identifier of the Ethernet device. 4037 * @return 4038 * - (0) if successful. 4039 * - (-ENOTSUP) if underlying hardware OR driver doesn't support 4040 * that operation. 4041 * - (-ENODEV) if *port_id* invalid. 4042 * - (-EIO) if device is removed. 4043 */ 4044 int rte_eth_led_on(uint16_t port_id); 4045 4046 /** 4047 * Turn off the LED on the Ethernet device. 4048 * This function turns off the LED on the Ethernet device. 4049 * 4050 * @param port_id 4051 * The port identifier of the Ethernet device. 4052 * @return 4053 * - (0) if successful. 4054 * - (-ENOTSUP) if underlying hardware OR driver doesn't support 4055 * that operation. 4056 * - (-ENODEV) if *port_id* invalid. 4057 * - (-EIO) if device is removed. 4058 */ 4059 int rte_eth_led_off(uint16_t port_id); 4060 4061 /** 4062 * @warning 4063 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 4064 * 4065 * Get Forward Error Correction(FEC) capability. 4066 * 4067 * @param port_id 4068 * The port identifier of the Ethernet device. 4069 * @param speed_fec_capa 4070 * speed_fec_capa is out only with per-speed capabilities. 4071 * If set to NULL, the function returns the required number 4072 * of required array entries. 4073 * @param num 4074 * a number of elements in an speed_fec_capa array. 4075 * 4076 * @return 4077 * - A non-negative value lower or equal to num: success. The return value 4078 * is the number of entries filled in the fec capa array. 4079 * - A non-negative value higher than num: error, the given fec capa array 4080 * is too small. The return value corresponds to the num that should 4081 * be given to succeed. The entries in fec capa array are not valid and 4082 * shall not be used by the caller. 4083 * - (-ENOTSUP) if underlying hardware OR driver doesn't support. 4084 * that operation. 4085 * - (-EIO) if device is removed. 4086 * - (-ENODEV) if *port_id* invalid. 4087 * - (-EINVAL) if *num* or *speed_fec_capa* invalid 4088 */ 4089 __rte_experimental 4090 int rte_eth_fec_get_capability(uint16_t port_id, 4091 struct rte_eth_fec_capa *speed_fec_capa, 4092 unsigned int num); 4093 4094 /** 4095 * @warning 4096 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 4097 * 4098 * Get current Forward Error Correction(FEC) mode. 4099 * If link is down and AUTO is enabled, AUTO is returned, otherwise, 4100 * configured FEC mode is returned. 4101 * If link is up, current FEC mode is returned. 4102 * 4103 * @param port_id 4104 * The port identifier of the Ethernet device. 4105 * @param fec_capa 4106 * A bitmask of enabled FEC modes. If AUTO bit is set, other 4107 * bits specify FEC modes which may be negotiated. If AUTO 4108 * bit is clear, specify FEC modes to be used (only one valid 4109 * mode per speed may be set). 4110 * @return 4111 * - (0) if successful. 4112 * - (-ENOTSUP) if underlying hardware OR driver doesn't support. 4113 * that operation. 4114 * - (-EIO) if device is removed. 4115 * - (-ENODEV) if *port_id* invalid. 4116 */ 4117 __rte_experimental 4118 int rte_eth_fec_get(uint16_t port_id, uint32_t *fec_capa); 4119 4120 /** 4121 * @warning 4122 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 4123 * 4124 * Set Forward Error Correction(FEC) mode. 4125 * 4126 * @param port_id 4127 * The port identifier of the Ethernet device. 4128 * @param fec_capa 4129 * A bitmask of allowed FEC modes. If AUTO bit is set, other 4130 * bits specify FEC modes which may be negotiated. If AUTO 4131 * bit is clear, specify FEC modes to be used (only one valid 4132 * mode per speed may be set). 4133 * @return 4134 * - (0) if successful. 4135 * - (-EINVAL) if the FEC mode is not valid. 4136 * - (-ENOTSUP) if underlying hardware OR driver doesn't support. 4137 * - (-EIO) if device is removed. 4138 * - (-ENODEV) if *port_id* invalid. 4139 */ 4140 __rte_experimental 4141 int rte_eth_fec_set(uint16_t port_id, uint32_t fec_capa); 4142 4143 /** 4144 * Get current status of the Ethernet link flow control for Ethernet device 4145 * 4146 * @param port_id 4147 * The port identifier of the Ethernet device. 4148 * @param fc_conf 4149 * The pointer to the structure where to store the flow control parameters. 4150 * @return 4151 * - (0) if successful. 4152 * - (-ENOTSUP) if hardware doesn't support flow control. 4153 * - (-ENODEV) if *port_id* invalid. 4154 * - (-EIO) if device is removed. 4155 * - (-EINVAL) if bad parameter. 4156 */ 4157 int rte_eth_dev_flow_ctrl_get(uint16_t port_id, 4158 struct rte_eth_fc_conf *fc_conf); 4159 4160 /** 4161 * Configure the Ethernet link flow control for Ethernet device 4162 * 4163 * @param port_id 4164 * The port identifier of the Ethernet device. 4165 * @param fc_conf 4166 * The pointer to the structure of the flow control parameters. 4167 * @return 4168 * - (0) if successful. 4169 * - (-ENOTSUP) if hardware doesn't support flow control mode. 4170 * - (-ENODEV) if *port_id* invalid. 4171 * - (-EINVAL) if bad parameter 4172 * - (-EIO) if flow control setup failure or device is removed. 4173 */ 4174 int rte_eth_dev_flow_ctrl_set(uint16_t port_id, 4175 struct rte_eth_fc_conf *fc_conf); 4176 4177 /** 4178 * Configure the Ethernet priority flow control under DCB environment 4179 * for Ethernet device. 4180 * 4181 * @param port_id 4182 * The port identifier of the Ethernet device. 4183 * @param pfc_conf 4184 * The pointer to the structure of the priority flow control parameters. 4185 * @return 4186 * - (0) if successful. 4187 * - (-ENOTSUP) if hardware doesn't support priority flow control mode. 4188 * - (-ENODEV) if *port_id* invalid. 4189 * - (-EINVAL) if bad parameter 4190 * - (-EIO) if flow control setup failure or device is removed. 4191 */ 4192 int rte_eth_dev_priority_flow_ctrl_set(uint16_t port_id, 4193 struct rte_eth_pfc_conf *pfc_conf); 4194 4195 /** 4196 * Add a MAC address to the set used for filtering incoming packets. 4197 * 4198 * @param port_id 4199 * The port identifier of the Ethernet device. 4200 * @param mac_addr 4201 * The MAC address to add. 4202 * @param pool 4203 * VMDq pool index to associate address with (if VMDq is enabled). If VMDq is 4204 * not enabled, this should be set to 0. 4205 * @return 4206 * - (0) if successfully added or *mac_addr* was already added. 4207 * - (-ENOTSUP) if hardware doesn't support this feature. 4208 * - (-ENODEV) if *port* is invalid. 4209 * - (-EIO) if device is removed. 4210 * - (-ENOSPC) if no more MAC addresses can be added. 4211 * - (-EINVAL) if MAC address is invalid. 4212 */ 4213 int rte_eth_dev_mac_addr_add(uint16_t port_id, struct rte_ether_addr *mac_addr, 4214 uint32_t pool); 4215 4216 /** 4217 * @warning 4218 * @b EXPERIMENTAL: this API may change without prior notice. 4219 * 4220 * Retrieve the information for queue based PFC. 4221 * 4222 * @param port_id 4223 * The port identifier of the Ethernet device. 4224 * @param pfc_queue_info 4225 * A pointer to a structure of type *rte_eth_pfc_queue_info* to be filled with 4226 * the information about queue based PFC. 4227 * @return 4228 * - (0) if successful. 4229 * - (-ENOTSUP) if support for priority_flow_ctrl_queue_info_get does not exist. 4230 * - (-ENODEV) if *port_id* invalid. 4231 * - (-EINVAL) if bad parameter. 4232 */ 4233 __rte_experimental 4234 int rte_eth_dev_priority_flow_ctrl_queue_info_get(uint16_t port_id, 4235 struct rte_eth_pfc_queue_info *pfc_queue_info); 4236 4237 /** 4238 * @warning 4239 * @b EXPERIMENTAL: this API may change without prior notice. 4240 * 4241 * Configure the queue based priority flow control for a given queue 4242 * for Ethernet device. 4243 * 4244 * @note When an ethdev port switches to queue based PFC mode, the 4245 * unconfigured queues shall be configured by the driver with 4246 * default values such as lower priority value for TC etc. 4247 * 4248 * @param port_id 4249 * The port identifier of the Ethernet device. 4250 * @param pfc_queue_conf 4251 * The pointer to the structure of the priority flow control parameters 4252 * for the queue. 4253 * @return 4254 * - (0) if successful. 4255 * - (-ENOTSUP) if hardware doesn't support queue based PFC mode. 4256 * - (-ENODEV) if *port_id* invalid. 4257 * - (-EINVAL) if bad parameter 4258 * - (-EIO) if flow control setup queue failure 4259 */ 4260 __rte_experimental 4261 int rte_eth_dev_priority_flow_ctrl_queue_configure(uint16_t port_id, 4262 struct rte_eth_pfc_queue_conf *pfc_queue_conf); 4263 4264 /** 4265 * Remove a MAC address from the internal array of addresses. 4266 * 4267 * @param port_id 4268 * The port identifier of the Ethernet device. 4269 * @param mac_addr 4270 * MAC address to remove. 4271 * @return 4272 * - (0) if successful, or *mac_addr* didn't exist. 4273 * - (-ENOTSUP) if hardware doesn't support. 4274 * - (-ENODEV) if *port* invalid. 4275 * - (-EADDRINUSE) if attempting to remove the default MAC address. 4276 * - (-EINVAL) if MAC address is invalid. 4277 */ 4278 int rte_eth_dev_mac_addr_remove(uint16_t port_id, 4279 struct rte_ether_addr *mac_addr); 4280 4281 /** 4282 * Set the default MAC address. 4283 * 4284 * @param port_id 4285 * The port identifier of the Ethernet device. 4286 * @param mac_addr 4287 * New default MAC address. 4288 * @return 4289 * - (0) if successful, or *mac_addr* didn't exist. 4290 * - (-ENOTSUP) if hardware doesn't support. 4291 * - (-ENODEV) if *port* invalid. 4292 * - (-EINVAL) if MAC address is invalid. 4293 */ 4294 int rte_eth_dev_default_mac_addr_set(uint16_t port_id, 4295 struct rte_ether_addr *mac_addr); 4296 4297 /** 4298 * Update Redirection Table(RETA) of Receive Side Scaling of Ethernet device. 4299 * 4300 * @param port_id 4301 * The port identifier of the Ethernet device. 4302 * @param reta_conf 4303 * RETA to update. 4304 * @param reta_size 4305 * Redirection table size. The table size can be queried by 4306 * rte_eth_dev_info_get(). 4307 * @return 4308 * - (0) if successful. 4309 * - (-ENODEV) if *port_id* is invalid. 4310 * - (-ENOTSUP) if hardware doesn't support. 4311 * - (-EINVAL) if bad parameter. 4312 * - (-EIO) if device is removed. 4313 */ 4314 int rte_eth_dev_rss_reta_update(uint16_t port_id, 4315 struct rte_eth_rss_reta_entry64 *reta_conf, 4316 uint16_t reta_size); 4317 4318 /** 4319 * Query Redirection Table(RETA) of Receive Side Scaling of Ethernet device. 4320 * 4321 * @param port_id 4322 * The port identifier of the Ethernet device. 4323 * @param reta_conf 4324 * RETA to query. For each requested reta entry, corresponding bit 4325 * in mask must be set. 4326 * @param reta_size 4327 * Redirection table size. The table size can be queried by 4328 * rte_eth_dev_info_get(). 4329 * @return 4330 * - (0) if successful. 4331 * - (-ENODEV) if *port_id* is invalid. 4332 * - (-ENOTSUP) if hardware doesn't support. 4333 * - (-EINVAL) if bad parameter. 4334 * - (-EIO) if device is removed. 4335 */ 4336 int rte_eth_dev_rss_reta_query(uint16_t port_id, 4337 struct rte_eth_rss_reta_entry64 *reta_conf, 4338 uint16_t reta_size); 4339 4340 /** 4341 * Updates unicast hash table for receiving packet with the given destination 4342 * MAC address, and the packet is routed to all VFs for which the Rx mode is 4343 * accept packets that match the unicast hash table. 4344 * 4345 * @param port_id 4346 * The port identifier of the Ethernet device. 4347 * @param addr 4348 * Unicast MAC address. 4349 * @param on 4350 * 1 - Set an unicast hash bit for receiving packets with the MAC address. 4351 * 0 - Clear an unicast hash bit. 4352 * @return 4353 * - (0) if successful. 4354 * - (-ENOTSUP) if hardware doesn't support. 4355 * - (-ENODEV) if *port_id* invalid. 4356 * - (-EIO) if device is removed. 4357 * - (-EINVAL) if bad parameter. 4358 */ 4359 int rte_eth_dev_uc_hash_table_set(uint16_t port_id, struct rte_ether_addr *addr, 4360 uint8_t on); 4361 4362 /** 4363 * Updates all unicast hash bitmaps for receiving packet with any Unicast 4364 * Ethernet MAC addresses,the packet is routed to all VFs for which the Rx 4365 * mode is accept packets that match the unicast hash table. 4366 * 4367 * @param port_id 4368 * The port identifier of the Ethernet device. 4369 * @param on 4370 * 1 - Set all unicast hash bitmaps for receiving all the Ethernet 4371 * MAC addresses 4372 * 0 - Clear all unicast hash bitmaps 4373 * @return 4374 * - (0) if successful. 4375 * - (-ENOTSUP) if hardware doesn't support. 4376 * - (-ENODEV) if *port_id* invalid. 4377 * - (-EIO) if device is removed. 4378 * - (-EINVAL) if bad parameter. 4379 */ 4380 int rte_eth_dev_uc_all_hash_table_set(uint16_t port_id, uint8_t on); 4381 4382 /** 4383 * Set the rate limitation for a queue on an Ethernet device. 4384 * 4385 * @param port_id 4386 * The port identifier of the Ethernet device. 4387 * @param queue_idx 4388 * The queue ID. 4389 * @param tx_rate 4390 * The Tx rate in Mbps. Allocated from the total port link speed. 4391 * @return 4392 * - (0) if successful. 4393 * - (-ENOTSUP) if hardware doesn't support this feature. 4394 * - (-ENODEV) if *port_id* invalid. 4395 * - (-EIO) if device is removed. 4396 * - (-EINVAL) if bad parameter. 4397 */ 4398 int rte_eth_set_queue_rate_limit(uint16_t port_id, uint16_t queue_idx, 4399 uint16_t tx_rate); 4400 4401 /** 4402 * Configuration of Receive Side Scaling hash computation of Ethernet device. 4403 * 4404 * @param port_id 4405 * The port identifier of the Ethernet device. 4406 * @param rss_conf 4407 * The new configuration to use for RSS hash computation on the port. 4408 * @return 4409 * - (0) if successful. 4410 * - (-ENODEV) if port identifier is invalid. 4411 * - (-EIO) if device is removed. 4412 * - (-ENOTSUP) if hardware doesn't support. 4413 * - (-EINVAL) if bad parameter. 4414 */ 4415 int rte_eth_dev_rss_hash_update(uint16_t port_id, 4416 struct rte_eth_rss_conf *rss_conf); 4417 4418 /** 4419 * Retrieve current configuration of Receive Side Scaling hash computation 4420 * of Ethernet device. 4421 * 4422 * @param port_id 4423 * The port identifier of the Ethernet device. 4424 * @param rss_conf 4425 * Where to store the current RSS hash configuration of the Ethernet device. 4426 * @return 4427 * - (0) if successful. 4428 * - (-ENODEV) if port identifier is invalid. 4429 * - (-EIO) if device is removed. 4430 * - (-ENOTSUP) if hardware doesn't support RSS. 4431 * - (-EINVAL) if bad parameter. 4432 */ 4433 int 4434 rte_eth_dev_rss_hash_conf_get(uint16_t port_id, 4435 struct rte_eth_rss_conf *rss_conf); 4436 4437 /** 4438 * Add UDP tunneling port for a type of tunnel. 4439 * 4440 * Some NICs may require such configuration to properly parse a tunnel 4441 * with any standard or custom UDP port. 4442 * The packets with this UDP port will be parsed for this type of tunnel. 4443 * The device parser will also check the rest of the tunnel headers 4444 * before classifying the packet. 4445 * 4446 * With some devices, this API will affect packet classification, i.e.: 4447 * - mbuf.packet_type reported on Rx 4448 * - rte_flow rules with tunnel items 4449 * 4450 * @param port_id 4451 * The port identifier of the Ethernet device. 4452 * @param tunnel_udp 4453 * UDP tunneling configuration. 4454 * 4455 * @return 4456 * - (0) if successful. 4457 * - (-ENODEV) if port identifier is invalid. 4458 * - (-EIO) if device is removed. 4459 * - (-ENOTSUP) if hardware doesn't support tunnel type. 4460 */ 4461 int 4462 rte_eth_dev_udp_tunnel_port_add(uint16_t port_id, 4463 struct rte_eth_udp_tunnel *tunnel_udp); 4464 4465 /** 4466 * Delete UDP tunneling port for a type of tunnel. 4467 * 4468 * The packets with this UDP port will not be classified as this type of tunnel 4469 * anymore if the device use such mapping for tunnel packet classification. 4470 * 4471 * @see rte_eth_dev_udp_tunnel_port_add 4472 * 4473 * @param port_id 4474 * The port identifier of the Ethernet device. 4475 * @param tunnel_udp 4476 * UDP tunneling configuration. 4477 * 4478 * @return 4479 * - (0) if successful. 4480 * - (-ENODEV) if port identifier is invalid. 4481 * - (-EIO) if device is removed. 4482 * - (-ENOTSUP) if hardware doesn't support tunnel type. 4483 */ 4484 int 4485 rte_eth_dev_udp_tunnel_port_delete(uint16_t port_id, 4486 struct rte_eth_udp_tunnel *tunnel_udp); 4487 4488 /** 4489 * Get DCB information on an Ethernet device. 4490 * 4491 * @param port_id 4492 * The port identifier of the Ethernet device. 4493 * @param dcb_info 4494 * DCB information. 4495 * @return 4496 * - (0) if successful. 4497 * - (-ENODEV) if port identifier is invalid. 4498 * - (-EIO) if device is removed. 4499 * - (-ENOTSUP) if hardware doesn't support. 4500 * - (-EINVAL) if bad parameter. 4501 */ 4502 int rte_eth_dev_get_dcb_info(uint16_t port_id, 4503 struct rte_eth_dcb_info *dcb_info); 4504 4505 struct rte_eth_rxtx_callback; 4506 4507 /** 4508 * Add a callback to be called on packet Rx on a given port and queue. 4509 * 4510 * This API configures a function to be called for each burst of 4511 * packets received on a given NIC port queue. The return value is a pointer 4512 * that can be used to later remove the callback using 4513 * rte_eth_remove_rx_callback(). 4514 * 4515 * Multiple functions are called in the order that they are added. 4516 * 4517 * @param port_id 4518 * The port identifier of the Ethernet device. 4519 * @param queue_id 4520 * The queue on the Ethernet device on which the callback is to be added. 4521 * @param fn 4522 * The callback function 4523 * @param user_param 4524 * A generic pointer parameter which will be passed to each invocation of the 4525 * callback function on this port and queue. Inter-thread synchronization 4526 * of any user data changes is the responsibility of the user. 4527 * 4528 * @return 4529 * NULL on error. 4530 * On success, a pointer value which can later be used to remove the callback. 4531 */ 4532 const struct rte_eth_rxtx_callback * 4533 rte_eth_add_rx_callback(uint16_t port_id, uint16_t queue_id, 4534 rte_rx_callback_fn fn, void *user_param); 4535 4536 /** 4537 * Add a callback that must be called first on packet Rx on a given port 4538 * and queue. 4539 * 4540 * This API configures a first function to be called for each burst of 4541 * packets received on a given NIC port queue. The return value is a pointer 4542 * that can be used to later remove the callback using 4543 * rte_eth_remove_rx_callback(). 4544 * 4545 * Multiple functions are called in the order that they are added. 4546 * 4547 * @param port_id 4548 * The port identifier of the Ethernet device. 4549 * @param queue_id 4550 * The queue on the Ethernet device on which the callback is to be added. 4551 * @param fn 4552 * The callback function 4553 * @param user_param 4554 * A generic pointer parameter which will be passed to each invocation of the 4555 * callback function on this port and queue. Inter-thread synchronization 4556 * of any user data changes is the responsibility of the user. 4557 * 4558 * @return 4559 * NULL on error. 4560 * On success, a pointer value which can later be used to remove the callback. 4561 */ 4562 const struct rte_eth_rxtx_callback * 4563 rte_eth_add_first_rx_callback(uint16_t port_id, uint16_t queue_id, 4564 rte_rx_callback_fn fn, void *user_param); 4565 4566 /** 4567 * Add a callback to be called on packet Tx on a given port and queue. 4568 * 4569 * This API configures a function to be called for each burst of 4570 * packets sent on a given NIC port queue. The return value is a pointer 4571 * that can be used to later remove the callback using 4572 * rte_eth_remove_tx_callback(). 4573 * 4574 * Multiple functions are called in the order that they are added. 4575 * 4576 * @param port_id 4577 * The port identifier of the Ethernet device. 4578 * @param queue_id 4579 * The queue on the Ethernet device on which the callback is to be added. 4580 * @param fn 4581 * The callback function 4582 * @param user_param 4583 * A generic pointer parameter which will be passed to each invocation of the 4584 * callback function on this port and queue. Inter-thread synchronization 4585 * of any user data changes is the responsibility of the user. 4586 * 4587 * @return 4588 * NULL on error. 4589 * On success, a pointer value which can later be used to remove the callback. 4590 */ 4591 const struct rte_eth_rxtx_callback * 4592 rte_eth_add_tx_callback(uint16_t port_id, uint16_t queue_id, 4593 rte_tx_callback_fn fn, void *user_param); 4594 4595 /** 4596 * Remove an Rx packet callback from a given port and queue. 4597 * 4598 * This function is used to removed callbacks that were added to a NIC port 4599 * queue using rte_eth_add_rx_callback(). 4600 * 4601 * Note: the callback is removed from the callback list but it isn't freed 4602 * since the it may still be in use. The memory for the callback can be 4603 * subsequently freed back by the application by calling rte_free(): 4604 * 4605 * - Immediately - if the port is stopped, or the user knows that no 4606 * callbacks are in flight e.g. if called from the thread doing Rx/Tx 4607 * on that queue. 4608 * 4609 * - After a short delay - where the delay is sufficient to allow any 4610 * in-flight callbacks to complete. Alternately, the RCU mechanism can be 4611 * used to detect when data plane threads have ceased referencing the 4612 * callback memory. 4613 * 4614 * @param port_id 4615 * The port identifier of the Ethernet device. 4616 * @param queue_id 4617 * The queue on the Ethernet device from which the callback is to be removed. 4618 * @param user_cb 4619 * User supplied callback created via rte_eth_add_rx_callback(). 4620 * 4621 * @return 4622 * - 0: Success. Callback was removed. 4623 * - -ENODEV: If *port_id* is invalid. 4624 * - -ENOTSUP: Callback support is not available. 4625 * - -EINVAL: The queue_id is out of range, or the callback 4626 * is NULL or not found for the port/queue. 4627 */ 4628 int rte_eth_remove_rx_callback(uint16_t port_id, uint16_t queue_id, 4629 const struct rte_eth_rxtx_callback *user_cb); 4630 4631 /** 4632 * Remove a Tx packet callback from a given port and queue. 4633 * 4634 * This function is used to removed callbacks that were added to a NIC port 4635 * queue using rte_eth_add_tx_callback(). 4636 * 4637 * Note: the callback is removed from the callback list but it isn't freed 4638 * since the it may still be in use. The memory for the callback can be 4639 * subsequently freed back by the application by calling rte_free(): 4640 * 4641 * - Immediately - if the port is stopped, or the user knows that no 4642 * callbacks are in flight e.g. if called from the thread doing Rx/Tx 4643 * on that queue. 4644 * 4645 * - After a short delay - where the delay is sufficient to allow any 4646 * in-flight callbacks to complete. Alternately, the RCU mechanism can be 4647 * used to detect when data plane threads have ceased referencing the 4648 * callback memory. 4649 * 4650 * @param port_id 4651 * The port identifier of the Ethernet device. 4652 * @param queue_id 4653 * The queue on the Ethernet device from which the callback is to be removed. 4654 * @param user_cb 4655 * User supplied callback created via rte_eth_add_tx_callback(). 4656 * 4657 * @return 4658 * - 0: Success. Callback was removed. 4659 * - -ENODEV: If *port_id* is invalid. 4660 * - -ENOTSUP: Callback support is not available. 4661 * - -EINVAL: The queue_id is out of range, or the callback 4662 * is NULL or not found for the port/queue. 4663 */ 4664 int rte_eth_remove_tx_callback(uint16_t port_id, uint16_t queue_id, 4665 const struct rte_eth_rxtx_callback *user_cb); 4666 4667 /** 4668 * Retrieve information about given port's Rx queue. 4669 * 4670 * @param port_id 4671 * The port identifier of the Ethernet device. 4672 * @param queue_id 4673 * The Rx queue on the Ethernet device for which information 4674 * will be retrieved. 4675 * @param qinfo 4676 * A pointer to a structure of type *rte_eth_rxq_info_info* to be filled with 4677 * the information of the Ethernet device. 4678 * 4679 * @return 4680 * - 0: Success 4681 * - -ENODEV: If *port_id* is invalid. 4682 * - -ENOTSUP: routine is not supported by the device PMD. 4683 * - -EINVAL: The queue_id is out of range, or the queue 4684 * is hairpin queue. 4685 */ 4686 int rte_eth_rx_queue_info_get(uint16_t port_id, uint16_t queue_id, 4687 struct rte_eth_rxq_info *qinfo); 4688 4689 /** 4690 * Retrieve information about given port's Tx queue. 4691 * 4692 * @param port_id 4693 * The port identifier of the Ethernet device. 4694 * @param queue_id 4695 * The Tx queue on the Ethernet device for which information 4696 * will be retrieved. 4697 * @param qinfo 4698 * A pointer to a structure of type *rte_eth_txq_info_info* to be filled with 4699 * the information of the Ethernet device. 4700 * 4701 * @return 4702 * - 0: Success 4703 * - -ENODEV: If *port_id* is invalid. 4704 * - -ENOTSUP: routine is not supported by the device PMD. 4705 * - -EINVAL: The queue_id is out of range, or the queue 4706 * is hairpin queue. 4707 */ 4708 int rte_eth_tx_queue_info_get(uint16_t port_id, uint16_t queue_id, 4709 struct rte_eth_txq_info *qinfo); 4710 4711 /** 4712 * Retrieve information about the Rx packet burst mode. 4713 * 4714 * @param port_id 4715 * The port identifier of the Ethernet device. 4716 * @param queue_id 4717 * The Rx queue on the Ethernet device for which information 4718 * will be retrieved. 4719 * @param mode 4720 * A pointer to a structure of type *rte_eth_burst_mode* to be filled 4721 * with the information of the packet burst mode. 4722 * 4723 * @return 4724 * - 0: Success 4725 * - -ENODEV: If *port_id* is invalid. 4726 * - -ENOTSUP: routine is not supported by the device PMD. 4727 * - -EINVAL: The queue_id is out of range. 4728 */ 4729 int rte_eth_rx_burst_mode_get(uint16_t port_id, uint16_t queue_id, 4730 struct rte_eth_burst_mode *mode); 4731 4732 /** 4733 * Retrieve information about the Tx packet burst mode. 4734 * 4735 * @param port_id 4736 * The port identifier of the Ethernet device. 4737 * @param queue_id 4738 * The Tx queue on the Ethernet device for which information 4739 * will be retrieved. 4740 * @param mode 4741 * A pointer to a structure of type *rte_eth_burst_mode* to be filled 4742 * with the information of the packet burst mode. 4743 * 4744 * @return 4745 * - 0: Success 4746 * - -ENODEV: If *port_id* is invalid. 4747 * - -ENOTSUP: routine is not supported by the device PMD. 4748 * - -EINVAL: The queue_id is out of range. 4749 */ 4750 int rte_eth_tx_burst_mode_get(uint16_t port_id, uint16_t queue_id, 4751 struct rte_eth_burst_mode *mode); 4752 4753 /** 4754 * @warning 4755 * @b EXPERIMENTAL: this API may change without prior notice. 4756 * 4757 * Retrieve the monitor condition for a given receive queue. 4758 * 4759 * @param port_id 4760 * The port identifier of the Ethernet device. 4761 * @param queue_id 4762 * The Rx queue on the Ethernet device for which information 4763 * will be retrieved. 4764 * @param pmc 4765 * The pointer to power-optimized monitoring condition structure. 4766 * 4767 * @return 4768 * - 0: Success. 4769 * -ENOTSUP: Operation not supported. 4770 * -EINVAL: Invalid parameters. 4771 * -ENODEV: Invalid port ID. 4772 */ 4773 __rte_experimental 4774 int rte_eth_get_monitor_addr(uint16_t port_id, uint16_t queue_id, 4775 struct rte_power_monitor_cond *pmc); 4776 4777 /** 4778 * Retrieve device registers and register attributes (number of registers and 4779 * register size) 4780 * 4781 * @param port_id 4782 * The port identifier of the Ethernet device. 4783 * @param info 4784 * Pointer to rte_dev_reg_info structure to fill in. If info->data is 4785 * NULL the function fills in the width and length fields. If non-NULL 4786 * the registers are put into the buffer pointed at by the data field. 4787 * @return 4788 * - (0) if successful. 4789 * - (-ENOTSUP) if hardware doesn't support. 4790 * - (-EINVAL) if bad parameter. 4791 * - (-ENODEV) if *port_id* invalid. 4792 * - (-EIO) if device is removed. 4793 * - others depends on the specific operations implementation. 4794 */ 4795 int rte_eth_dev_get_reg_info(uint16_t port_id, struct rte_dev_reg_info *info); 4796 4797 /** 4798 * Retrieve size of device EEPROM 4799 * 4800 * @param port_id 4801 * The port identifier of the Ethernet device. 4802 * @return 4803 * - (>=0) EEPROM size if successful. 4804 * - (-ENOTSUP) if hardware doesn't support. 4805 * - (-ENODEV) if *port_id* invalid. 4806 * - (-EIO) if device is removed. 4807 * - others depends on the specific operations implementation. 4808 */ 4809 int rte_eth_dev_get_eeprom_length(uint16_t port_id); 4810 4811 /** 4812 * Retrieve EEPROM and EEPROM attribute 4813 * 4814 * @param port_id 4815 * The port identifier of the Ethernet device. 4816 * @param info 4817 * The template includes buffer for return EEPROM data and 4818 * EEPROM attributes to be filled. 4819 * @return 4820 * - (0) if successful. 4821 * - (-ENOTSUP) if hardware doesn't support. 4822 * - (-EINVAL) if bad parameter. 4823 * - (-ENODEV) if *port_id* invalid. 4824 * - (-EIO) if device is removed. 4825 * - others depends on the specific operations implementation. 4826 */ 4827 int rte_eth_dev_get_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); 4828 4829 /** 4830 * Program EEPROM with provided data 4831 * 4832 * @param port_id 4833 * The port identifier of the Ethernet device. 4834 * @param info 4835 * The template includes EEPROM data for programming and 4836 * EEPROM attributes to be filled 4837 * @return 4838 * - (0) if successful. 4839 * - (-ENOTSUP) if hardware doesn't support. 4840 * - (-ENODEV) if *port_id* invalid. 4841 * - (-EINVAL) if bad parameter. 4842 * - (-EIO) if device is removed. 4843 * - others depends on the specific operations implementation. 4844 */ 4845 int rte_eth_dev_set_eeprom(uint16_t port_id, struct rte_dev_eeprom_info *info); 4846 4847 /** 4848 * @warning 4849 * @b EXPERIMENTAL: this API may change without prior notice. 4850 * 4851 * Retrieve the type and size of plugin module EEPROM 4852 * 4853 * @param port_id 4854 * The port identifier of the Ethernet device. 4855 * @param modinfo 4856 * The type and size of plugin module EEPROM. 4857 * @return 4858 * - (0) if successful. 4859 * - (-ENOTSUP) if hardware doesn't support. 4860 * - (-ENODEV) if *port_id* invalid. 4861 * - (-EINVAL) if bad parameter. 4862 * - (-EIO) if device is removed. 4863 * - others depends on the specific operations implementation. 4864 */ 4865 __rte_experimental 4866 int 4867 rte_eth_dev_get_module_info(uint16_t port_id, 4868 struct rte_eth_dev_module_info *modinfo); 4869 4870 /** 4871 * @warning 4872 * @b EXPERIMENTAL: this API may change without prior notice. 4873 * 4874 * Retrieve the data of plugin module EEPROM 4875 * 4876 * @param port_id 4877 * The port identifier of the Ethernet device. 4878 * @param info 4879 * The template includes the plugin module EEPROM attributes, and the 4880 * buffer for return plugin module EEPROM data. 4881 * @return 4882 * - (0) if successful. 4883 * - (-ENOTSUP) if hardware doesn't support. 4884 * - (-EINVAL) if bad parameter. 4885 * - (-ENODEV) if *port_id* invalid. 4886 * - (-EIO) if device is removed. 4887 * - others depends on the specific operations implementation. 4888 */ 4889 __rte_experimental 4890 int 4891 rte_eth_dev_get_module_eeprom(uint16_t port_id, 4892 struct rte_dev_eeprom_info *info); 4893 4894 /** 4895 * Set the list of multicast addresses to filter on an Ethernet device. 4896 * 4897 * @param port_id 4898 * The port identifier of the Ethernet device. 4899 * @param mc_addr_set 4900 * The array of multicast addresses to set. Equal to NULL when the function 4901 * is invoked to flush the set of filtered addresses. 4902 * @param nb_mc_addr 4903 * The number of multicast addresses in the *mc_addr_set* array. Equal to 0 4904 * when the function is invoked to flush the set of filtered addresses. 4905 * @return 4906 * - (0) if successful. 4907 * - (-ENODEV) if *port_id* invalid. 4908 * - (-EIO) if device is removed. 4909 * - (-ENOTSUP) if PMD of *port_id* doesn't support multicast filtering. 4910 * - (-ENOSPC) if *port_id* has not enough multicast filtering resources. 4911 * - (-EINVAL) if bad parameter. 4912 */ 4913 int rte_eth_dev_set_mc_addr_list(uint16_t port_id, 4914 struct rte_ether_addr *mc_addr_set, 4915 uint32_t nb_mc_addr); 4916 4917 /** 4918 * Enable IEEE1588/802.1AS timestamping for an Ethernet device. 4919 * 4920 * @param port_id 4921 * The port identifier of the Ethernet device. 4922 * 4923 * @return 4924 * - 0: Success. 4925 * - -ENODEV: The port ID is invalid. 4926 * - -EIO: if device is removed. 4927 * - -ENOTSUP: The function is not supported by the Ethernet driver. 4928 */ 4929 int rte_eth_timesync_enable(uint16_t port_id); 4930 4931 /** 4932 * Disable IEEE1588/802.1AS timestamping for an Ethernet device. 4933 * 4934 * @param port_id 4935 * The port identifier of the Ethernet device. 4936 * 4937 * @return 4938 * - 0: Success. 4939 * - -ENODEV: The port ID is invalid. 4940 * - -EIO: if device is removed. 4941 * - -ENOTSUP: The function is not supported by the Ethernet driver. 4942 */ 4943 int rte_eth_timesync_disable(uint16_t port_id); 4944 4945 /** 4946 * Read an IEEE1588/802.1AS Rx timestamp from an Ethernet device. 4947 * 4948 * @param port_id 4949 * The port identifier of the Ethernet device. 4950 * @param timestamp 4951 * Pointer to the timestamp struct. 4952 * @param flags 4953 * Device specific flags. Used to pass the Rx timesync register index to 4954 * i40e. Unused in igb/ixgbe, pass 0 instead. 4955 * 4956 * @return 4957 * - 0: Success. 4958 * - -EINVAL: No timestamp is available. 4959 * - -ENODEV: The port ID is invalid. 4960 * - -EIO: if device is removed. 4961 * - -ENOTSUP: The function is not supported by the Ethernet driver. 4962 */ 4963 int rte_eth_timesync_read_rx_timestamp(uint16_t port_id, 4964 struct timespec *timestamp, uint32_t flags); 4965 4966 /** 4967 * Read an IEEE1588/802.1AS Tx timestamp from an Ethernet device. 4968 * 4969 * @param port_id 4970 * The port identifier of the Ethernet device. 4971 * @param timestamp 4972 * Pointer to the timestamp struct. 4973 * 4974 * @return 4975 * - 0: Success. 4976 * - -EINVAL: No timestamp is available. 4977 * - -ENODEV: The port ID is invalid. 4978 * - -EIO: if device is removed. 4979 * - -ENOTSUP: The function is not supported by the Ethernet driver. 4980 */ 4981 int rte_eth_timesync_read_tx_timestamp(uint16_t port_id, 4982 struct timespec *timestamp); 4983 4984 /** 4985 * Adjust the timesync clock on an Ethernet device. 4986 * 4987 * This is usually used in conjunction with other Ethdev timesync functions to 4988 * synchronize the device time using the IEEE1588/802.1AS protocol. 4989 * 4990 * @param port_id 4991 * The port identifier of the Ethernet device. 4992 * @param delta 4993 * The adjustment in nanoseconds. 4994 * 4995 * @return 4996 * - 0: Success. 4997 * - -ENODEV: The port ID is invalid. 4998 * - -EIO: if device is removed. 4999 * - -ENOTSUP: The function is not supported by the Ethernet driver. 5000 */ 5001 int rte_eth_timesync_adjust_time(uint16_t port_id, int64_t delta); 5002 5003 /** 5004 * Read the time from the timesync clock on an Ethernet device. 5005 * 5006 * This is usually used in conjunction with other Ethdev timesync functions to 5007 * synchronize the device time using the IEEE1588/802.1AS protocol. 5008 * 5009 * @param port_id 5010 * The port identifier of the Ethernet device. 5011 * @param time 5012 * Pointer to the timespec struct that holds the time. 5013 * 5014 * @return 5015 * - 0: Success. 5016 * - -EINVAL: Bad parameter. 5017 */ 5018 int rte_eth_timesync_read_time(uint16_t port_id, struct timespec *time); 5019 5020 /** 5021 * Set the time of the timesync clock on an Ethernet device. 5022 * 5023 * This is usually used in conjunction with other Ethdev timesync functions to 5024 * synchronize the device time using the IEEE1588/802.1AS protocol. 5025 * 5026 * @param port_id 5027 * The port identifier of the Ethernet device. 5028 * @param time 5029 * Pointer to the timespec struct that holds the time. 5030 * 5031 * @return 5032 * - 0: Success. 5033 * - -EINVAL: No timestamp is available. 5034 * - -ENODEV: The port ID is invalid. 5035 * - -EIO: if device is removed. 5036 * - -ENOTSUP: The function is not supported by the Ethernet driver. 5037 */ 5038 int rte_eth_timesync_write_time(uint16_t port_id, const struct timespec *time); 5039 5040 /** 5041 * @warning 5042 * @b EXPERIMENTAL: this API may change without prior notice. 5043 * 5044 * Read the current clock counter of an Ethernet device 5045 * 5046 * This returns the current raw clock value of an Ethernet device. It is 5047 * a raw amount of ticks, with no given time reference. 5048 * The value returned here is from the same clock than the one 5049 * filling timestamp field of Rx packets when using hardware timestamp 5050 * offload. Therefore it can be used to compute a precise conversion of 5051 * the device clock to the real time. 5052 * 5053 * E.g, a simple heuristic to derivate the frequency would be: 5054 * uint64_t start, end; 5055 * rte_eth_read_clock(port, start); 5056 * rte_delay_ms(100); 5057 * rte_eth_read_clock(port, end); 5058 * double freq = (end - start) * 10; 5059 * 5060 * Compute a common reference with: 5061 * uint64_t base_time_sec = current_time(); 5062 * uint64_t base_clock; 5063 * rte_eth_read_clock(port, base_clock); 5064 * 5065 * Then, convert the raw mbuf timestamp with: 5066 * base_time_sec + (double)(*timestamp_dynfield(mbuf) - base_clock) / freq; 5067 * 5068 * This simple example will not provide a very good accuracy. One must 5069 * at least measure multiple times the frequency and do a regression. 5070 * To avoid deviation from the system time, the common reference can 5071 * be repeated from time to time. The integer division can also be 5072 * converted by a multiplication and a shift for better performance. 5073 * 5074 * @param port_id 5075 * The port identifier of the Ethernet device. 5076 * @param clock 5077 * Pointer to the uint64_t that holds the raw clock value. 5078 * 5079 * @return 5080 * - 0: Success. 5081 * - -ENODEV: The port ID is invalid. 5082 * - -ENOTSUP: The function is not supported by the Ethernet driver. 5083 * - -EINVAL: if bad parameter. 5084 */ 5085 __rte_experimental 5086 int 5087 rte_eth_read_clock(uint16_t port_id, uint64_t *clock); 5088 5089 /** 5090 * Get the port ID from device name. The device name should be specified 5091 * as below: 5092 * - PCIe address (Domain:Bus:Device.Function), for example- 0000:2:00.0 5093 * - SoC device name, for example- fsl-gmac0 5094 * - vdev dpdk name, for example- net_[pcap0|null0|tap0] 5095 * 5096 * @param name 5097 * pci address or name of the device 5098 * @param port_id 5099 * pointer to port identifier of the device 5100 * @return 5101 * - (0) if successful and port_id is filled. 5102 * - (-ENODEV or -EINVAL) on failure. 5103 */ 5104 int 5105 rte_eth_dev_get_port_by_name(const char *name, uint16_t *port_id); 5106 5107 /** 5108 * Get the device name from port ID. The device name is specified as below: 5109 * - PCIe address (Domain:Bus:Device.Function), for example- 0000:02:00.0 5110 * - SoC device name, for example- fsl-gmac0 5111 * - vdev dpdk name, for example- net_[pcap0|null0|tun0|tap0] 5112 * 5113 * @param port_id 5114 * Port identifier of the device. 5115 * @param name 5116 * Buffer of size RTE_ETH_NAME_MAX_LEN to store the name. 5117 * @return 5118 * - (0) if successful. 5119 * - (-ENODEV) if *port_id* is invalid. 5120 * - (-EINVAL) on failure. 5121 */ 5122 int 5123 rte_eth_dev_get_name_by_port(uint16_t port_id, char *name); 5124 5125 /** 5126 * Check that numbers of Rx and Tx descriptors satisfy descriptors limits from 5127 * the Ethernet device information, otherwise adjust them to boundaries. 5128 * 5129 * @param port_id 5130 * The port identifier of the Ethernet device. 5131 * @param nb_rx_desc 5132 * A pointer to a uint16_t where the number of receive 5133 * descriptors stored. 5134 * @param nb_tx_desc 5135 * A pointer to a uint16_t where the number of transmit 5136 * descriptors stored. 5137 * @return 5138 * - (0) if successful. 5139 * - (-ENOTSUP, -ENODEV or -EINVAL) on failure. 5140 */ 5141 int rte_eth_dev_adjust_nb_rx_tx_desc(uint16_t port_id, 5142 uint16_t *nb_rx_desc, 5143 uint16_t *nb_tx_desc); 5144 5145 /** 5146 * Test if a port supports specific mempool ops. 5147 * 5148 * @param port_id 5149 * Port identifier of the Ethernet device. 5150 * @param [in] pool 5151 * The name of the pool operations to test. 5152 * @return 5153 * - 0: best mempool ops choice for this port. 5154 * - 1: mempool ops are supported for this port. 5155 * - -ENOTSUP: mempool ops not supported for this port. 5156 * - -ENODEV: Invalid port Identifier. 5157 * - -EINVAL: Pool param is null. 5158 */ 5159 int 5160 rte_eth_dev_pool_ops_supported(uint16_t port_id, const char *pool); 5161 5162 /** 5163 * Get the security context for the Ethernet device. 5164 * 5165 * @param port_id 5166 * Port identifier of the Ethernet device 5167 * @return 5168 * - NULL on error. 5169 * - pointer to security context on success. 5170 */ 5171 void * 5172 rte_eth_dev_get_sec_ctx(uint16_t port_id); 5173 5174 /** 5175 * @warning 5176 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 5177 * 5178 * Query the device hairpin capabilities. 5179 * 5180 * @param port_id 5181 * The port identifier of the Ethernet device. 5182 * @param cap 5183 * Pointer to a structure that will hold the hairpin capabilities. 5184 * @return 5185 * - (0) if successful. 5186 * - (-ENOTSUP) if hardware doesn't support. 5187 * - (-EINVAL) if bad parameter. 5188 */ 5189 __rte_experimental 5190 int rte_eth_dev_hairpin_capability_get(uint16_t port_id, 5191 struct rte_eth_hairpin_cap *cap); 5192 5193 /** 5194 * @warning 5195 * @b EXPERIMENTAL: this structure may change without prior notice. 5196 * 5197 * Ethernet device representor ID range entry 5198 */ 5199 struct rte_eth_representor_range { 5200 enum rte_eth_representor_type type; /**< Representor type */ 5201 int controller; /**< Controller index */ 5202 int pf; /**< Physical function index */ 5203 __extension__ 5204 union { 5205 int vf; /**< VF start index */ 5206 int sf; /**< SF start index */ 5207 }; 5208 uint32_t id_base; /**< Representor ID start index */ 5209 uint32_t id_end; /**< Representor ID end index */ 5210 char name[RTE_DEV_NAME_MAX_LEN]; /**< Representor name */ 5211 }; 5212 5213 /** 5214 * @warning 5215 * @b EXPERIMENTAL: this structure may change without prior notice. 5216 * 5217 * Ethernet device representor information 5218 */ 5219 struct rte_eth_representor_info { 5220 uint16_t controller; /**< Controller ID of caller device. */ 5221 uint16_t pf; /**< Physical function ID of caller device. */ 5222 uint32_t nb_ranges_alloc; /**< Size of the ranges array. */ 5223 uint32_t nb_ranges; /**< Number of initialized ranges. */ 5224 struct rte_eth_representor_range ranges[];/**< Representor ID range. */ 5225 }; 5226 5227 /** 5228 * Retrieve the representor info of the device. 5229 * 5230 * Get device representor info to be able to calculate a unique 5231 * representor ID. @see rte_eth_representor_id_get helper. 5232 * 5233 * @param port_id 5234 * The port identifier of the device. 5235 * @param info 5236 * A pointer to a representor info structure. 5237 * NULL to return number of range entries and allocate memory 5238 * for next call to store detail. 5239 * The number of ranges that were written into this structure 5240 * will be placed into its nb_ranges field. This number cannot be 5241 * larger than the nb_ranges_alloc that by the user before calling 5242 * this function. It can be smaller than the value returned by the 5243 * function, however. 5244 * @return 5245 * - (-ENOTSUP) if operation is not supported. 5246 * - (-ENODEV) if *port_id* invalid. 5247 * - (-EIO) if device is removed. 5248 * - (>=0) number of available representor range entries. 5249 */ 5250 __rte_experimental 5251 int rte_eth_representor_info_get(uint16_t port_id, 5252 struct rte_eth_representor_info *info); 5253 5254 /** The NIC is able to deliver flag (if set) with packets to the PMD. */ 5255 #define RTE_ETH_RX_METADATA_USER_FLAG RTE_BIT64(0) 5256 5257 /** The NIC is able to deliver mark ID with packets to the PMD. */ 5258 #define RTE_ETH_RX_METADATA_USER_MARK RTE_BIT64(1) 5259 5260 /** The NIC is able to deliver tunnel ID with packets to the PMD. */ 5261 #define RTE_ETH_RX_METADATA_TUNNEL_ID RTE_BIT64(2) 5262 5263 /** 5264 * @warning 5265 * @b EXPERIMENTAL: this API may change without prior notice 5266 * 5267 * Negotiate the NIC's ability to deliver specific kinds of metadata to the PMD. 5268 * 5269 * Invoke this API before the first rte_eth_dev_configure() invocation 5270 * to let the PMD make preparations that are inconvenient to do later. 5271 * 5272 * The negotiation process is as follows: 5273 * 5274 * - the application requests features intending to use at least some of them; 5275 * - the PMD responds with the guaranteed subset of the requested feature set; 5276 * - the application can retry negotiation with another set of features; 5277 * - the application can pass zero to clear the negotiation result; 5278 * - the last negotiated result takes effect upon 5279 * the ethdev configure and start. 5280 * 5281 * @note 5282 * The PMD is supposed to first consider enabling the requested feature set 5283 * in its entirety. Only if it fails to do so, does it have the right to 5284 * respond with a smaller set of the originally requested features. 5285 * 5286 * @note 5287 * Return code (-ENOTSUP) does not necessarily mean that the requested 5288 * features are unsupported. In this case, the application should just 5289 * assume that these features can be used without prior negotiations. 5290 * 5291 * @param port_id 5292 * Port (ethdev) identifier 5293 * 5294 * @param[inout] features 5295 * Feature selection buffer 5296 * 5297 * @return 5298 * - (-EBUSY) if the port can't handle this in its current state; 5299 * - (-ENOTSUP) if the method itself is not supported by the PMD; 5300 * - (-ENODEV) if *port_id* is invalid; 5301 * - (-EINVAL) if *features* is NULL; 5302 * - (-EIO) if the device is removed; 5303 * - (0) on success 5304 */ 5305 __rte_experimental 5306 int rte_eth_rx_metadata_negotiate(uint16_t port_id, uint64_t *features); 5307 5308 /** Flag to offload IP reassembly for IPv4 packets. */ 5309 #define RTE_ETH_DEV_REASSEMBLY_F_IPV4 (RTE_BIT32(0)) 5310 /** Flag to offload IP reassembly for IPv6 packets. */ 5311 #define RTE_ETH_DEV_REASSEMBLY_F_IPV6 (RTE_BIT32(1)) 5312 5313 /** 5314 * A structure used to get/set IP reassembly configuration. It is also used 5315 * to get the maximum capability values that a PMD can support. 5316 * 5317 * If rte_eth_ip_reassembly_capability_get() returns 0, IP reassembly can be 5318 * enabled using rte_eth_ip_reassembly_conf_set() and params values lower than 5319 * capability params can be set in the PMD. 5320 */ 5321 struct rte_eth_ip_reassembly_params { 5322 /** Maximum time in ms which PMD can wait for other fragments. */ 5323 uint32_t timeout_ms; 5324 /** Maximum number of fragments that can be reassembled. */ 5325 uint16_t max_frags; 5326 /** 5327 * Flags to enable reassembly of packet types - 5328 * RTE_ETH_DEV_REASSEMBLY_F_xxx. 5329 */ 5330 uint16_t flags; 5331 }; 5332 5333 /** 5334 * @warning 5335 * @b EXPERIMENTAL: this API may change without prior notice 5336 * 5337 * Get IP reassembly capabilities supported by the PMD. This is the first API 5338 * to be called for enabling the IP reassembly offload feature. PMD will return 5339 * the maximum values of parameters that PMD can support and user can call 5340 * rte_eth_ip_reassembly_conf_set() with param values lower than capability. 5341 * 5342 * @param port_id 5343 * The port identifier of the device. 5344 * @param capa 5345 * A pointer to rte_eth_ip_reassembly_params structure. 5346 * @return 5347 * - (-ENOTSUP) if offload configuration is not supported by device. 5348 * - (-ENODEV) if *port_id* invalid. 5349 * - (-EIO) if device is removed. 5350 * - (-EINVAL) if device is not configured or *capa* passed is NULL. 5351 * - (0) on success. 5352 */ 5353 __rte_experimental 5354 int rte_eth_ip_reassembly_capability_get(uint16_t port_id, 5355 struct rte_eth_ip_reassembly_params *capa); 5356 5357 /** 5358 * @warning 5359 * @b EXPERIMENTAL: this API may change without prior notice 5360 * 5361 * Get IP reassembly configuration parameters currently set in PMD. 5362 * The API will return error if the configuration is not already 5363 * set using rte_eth_ip_reassembly_conf_set() before calling this API or if 5364 * the device is not configured. 5365 * 5366 * @param port_id 5367 * The port identifier of the device. 5368 * @param conf 5369 * A pointer to rte_eth_ip_reassembly_params structure. 5370 * @return 5371 * - (-ENOTSUP) if offload configuration is not supported by device. 5372 * - (-ENODEV) if *port_id* invalid. 5373 * - (-EIO) if device is removed. 5374 * - (-EINVAL) if device is not configured or if *conf* passed is NULL or if 5375 * configuration is not set using rte_eth_ip_reassembly_conf_set(). 5376 * - (0) on success. 5377 */ 5378 __rte_experimental 5379 int rte_eth_ip_reassembly_conf_get(uint16_t port_id, 5380 struct rte_eth_ip_reassembly_params *conf); 5381 5382 /** 5383 * @warning 5384 * @b EXPERIMENTAL: this API may change without prior notice 5385 * 5386 * Set IP reassembly configuration parameters if the PMD supports IP reassembly 5387 * offload. User should first call rte_eth_ip_reassembly_capability_get() to 5388 * check the maximum values supported by the PMD before setting the 5389 * configuration. The use of this API is mandatory to enable this feature and 5390 * should be called before rte_eth_dev_start(). 5391 * 5392 * In datapath, PMD cannot guarantee that IP reassembly is always successful. 5393 * Hence, PMD shall register mbuf dynamic field and dynamic flag using 5394 * rte_eth_ip_reassembly_dynfield_register() to denote incomplete IP reassembly. 5395 * If dynfield is not successfully registered, error will be returned and 5396 * IP reassembly offload cannot be used. 5397 * 5398 * @param port_id 5399 * The port identifier of the device. 5400 * @param conf 5401 * A pointer to rte_eth_ip_reassembly_params structure. 5402 * @return 5403 * - (-ENOTSUP) if offload configuration is not supported by device. 5404 * - (-ENODEV) if *port_id* invalid. 5405 * - (-EIO) if device is removed. 5406 * - (-EINVAL) if device is not configured or if device is already started or 5407 * if *conf* passed is NULL or if mbuf dynfield is not registered 5408 * successfully by the PMD. 5409 * - (0) on success. 5410 */ 5411 __rte_experimental 5412 int rte_eth_ip_reassembly_conf_set(uint16_t port_id, 5413 const struct rte_eth_ip_reassembly_params *conf); 5414 5415 /** 5416 * In case of IP reassembly offload failure, packet will be updated with 5417 * dynamic flag - RTE_MBUF_DYNFLAG_IP_REASSEMBLY_INCOMPLETE_NAME and packets 5418 * will be returned without alteration. 5419 * The application can retrieve the attached fragments using mbuf dynamic field 5420 * RTE_MBUF_DYNFIELD_IP_REASSEMBLY_NAME. 5421 */ 5422 typedef struct { 5423 /** 5424 * Next fragment packet. Application should fetch dynamic field of 5425 * each fragment until a NULL is received and nb_frags is 0. 5426 */ 5427 struct rte_mbuf *next_frag; 5428 /** Time spent(in ms) by HW in waiting for further fragments. */ 5429 uint16_t time_spent; 5430 /** Number of more fragments attached in mbuf dynamic fields. */ 5431 uint16_t nb_frags; 5432 } rte_eth_ip_reassembly_dynfield_t; 5433 5434 /** 5435 * @warning 5436 * @b EXPERIMENTAL: this API may change, or be removed, without prior notice 5437 * 5438 * Dump private info from device to a file. Provided data and the order depends 5439 * on the PMD. 5440 * 5441 * @param port_id 5442 * The port identifier of the Ethernet device. 5443 * @param file 5444 * A pointer to a file for output. 5445 * @return 5446 * - (0) on success. 5447 * - (-ENODEV) if *port_id* is invalid. 5448 * - (-EINVAL) if null file. 5449 * - (-ENOTSUP) if the device does not support this function. 5450 * - (-EIO) if device is removed. 5451 */ 5452 __rte_experimental 5453 int rte_eth_dev_priv_dump(uint16_t port_id, FILE *file); 5454 5455 #include <rte_ethdev_core.h> 5456 5457 /** 5458 * @internal 5459 * Helper routine for rte_eth_rx_burst(). 5460 * Should be called at exit from PMD's rte_eth_rx_bulk implementation. 5461 * Does necessary post-processing - invokes Rx callbacks if any, etc. 5462 * 5463 * @param port_id 5464 * The port identifier of the Ethernet device. 5465 * @param queue_id 5466 * The index of the receive queue from which to retrieve input packets. 5467 * @param rx_pkts 5468 * The address of an array of pointers to *rte_mbuf* structures that 5469 * have been retrieved from the device. 5470 * @param nb_rx 5471 * The number of packets that were retrieved from the device. 5472 * @param nb_pkts 5473 * The number of elements in @p rx_pkts array. 5474 * @param opaque 5475 * Opaque pointer of Rx queue callback related data. 5476 * 5477 * @return 5478 * The number of packets effectively supplied to the @p rx_pkts array. 5479 */ 5480 uint16_t rte_eth_call_rx_callbacks(uint16_t port_id, uint16_t queue_id, 5481 struct rte_mbuf **rx_pkts, uint16_t nb_rx, uint16_t nb_pkts, 5482 void *opaque); 5483 5484 /** 5485 * 5486 * Retrieve a burst of input packets from a receive queue of an Ethernet 5487 * device. The retrieved packets are stored in *rte_mbuf* structures whose 5488 * pointers are supplied in the *rx_pkts* array. 5489 * 5490 * The rte_eth_rx_burst() function loops, parsing the Rx ring of the 5491 * receive queue, up to *nb_pkts* packets, and for each completed Rx 5492 * descriptor in the ring, it performs the following operations: 5493 * 5494 * - Initialize the *rte_mbuf* data structure associated with the 5495 * Rx descriptor according to the information provided by the NIC into 5496 * that Rx descriptor. 5497 * 5498 * - Store the *rte_mbuf* data structure into the next entry of the 5499 * *rx_pkts* array. 5500 * 5501 * - Replenish the Rx descriptor with a new *rte_mbuf* buffer 5502 * allocated from the memory pool associated with the receive queue at 5503 * initialization time. 5504 * 5505 * When retrieving an input packet that was scattered by the controller 5506 * into multiple receive descriptors, the rte_eth_rx_burst() function 5507 * appends the associated *rte_mbuf* buffers to the first buffer of the 5508 * packet. 5509 * 5510 * The rte_eth_rx_burst() function returns the number of packets 5511 * actually retrieved, which is the number of *rte_mbuf* data structures 5512 * effectively supplied into the *rx_pkts* array. 5513 * A return value equal to *nb_pkts* indicates that the Rx queue contained 5514 * at least *rx_pkts* packets, and this is likely to signify that other 5515 * received packets remain in the input queue. Applications implementing 5516 * a "retrieve as much received packets as possible" policy can check this 5517 * specific case and keep invoking the rte_eth_rx_burst() function until 5518 * a value less than *nb_pkts* is returned. 5519 * 5520 * This receive method has the following advantages: 5521 * 5522 * - It allows a run-to-completion network stack engine to retrieve and 5523 * to immediately process received packets in a fast burst-oriented 5524 * approach, avoiding the overhead of unnecessary intermediate packet 5525 * queue/dequeue operations. 5526 * 5527 * - Conversely, it also allows an asynchronous-oriented processing 5528 * method to retrieve bursts of received packets and to immediately 5529 * queue them for further parallel processing by another logical core, 5530 * for instance. However, instead of having received packets being 5531 * individually queued by the driver, this approach allows the caller 5532 * of the rte_eth_rx_burst() function to queue a burst of retrieved 5533 * packets at a time and therefore dramatically reduce the cost of 5534 * enqueue/dequeue operations per packet. 5535 * 5536 * - It allows the rte_eth_rx_burst() function of the driver to take 5537 * advantage of burst-oriented hardware features (CPU cache, 5538 * prefetch instructions, and so on) to minimize the number of CPU 5539 * cycles per packet. 5540 * 5541 * To summarize, the proposed receive API enables many 5542 * burst-oriented optimizations in both synchronous and asynchronous 5543 * packet processing environments with no overhead in both cases. 5544 * 5545 * @note 5546 * Some drivers using vector instructions require that *nb_pkts* is 5547 * divisible by 4 or 8, depending on the driver implementation. 5548 * 5549 * The rte_eth_rx_burst() function does not provide any error 5550 * notification to avoid the corresponding overhead. As a hint, the 5551 * upper-level application might check the status of the device link once 5552 * being systematically returned a 0 value for a given number of tries. 5553 * 5554 * @param port_id 5555 * The port identifier of the Ethernet device. 5556 * @param queue_id 5557 * The index of the receive queue from which to retrieve input packets. 5558 * The value must be in the range [0, nb_rx_queue - 1] previously supplied 5559 * to rte_eth_dev_configure(). 5560 * @param rx_pkts 5561 * The address of an array of pointers to *rte_mbuf* structures that 5562 * must be large enough to store *nb_pkts* pointers in it. 5563 * @param nb_pkts 5564 * The maximum number of packets to retrieve. 5565 * The value must be divisible by 8 in order to work with any driver. 5566 * @return 5567 * The number of packets actually retrieved, which is the number 5568 * of pointers to *rte_mbuf* structures effectively supplied to the 5569 * *rx_pkts* array. 5570 */ 5571 static inline uint16_t 5572 rte_eth_rx_burst(uint16_t port_id, uint16_t queue_id, 5573 struct rte_mbuf **rx_pkts, const uint16_t nb_pkts) 5574 { 5575 uint16_t nb_rx; 5576 struct rte_eth_fp_ops *p; 5577 void *qd; 5578 5579 #ifdef RTE_ETHDEV_DEBUG_RX 5580 if (port_id >= RTE_MAX_ETHPORTS || 5581 queue_id >= RTE_MAX_QUEUES_PER_PORT) { 5582 RTE_ETHDEV_LOG(ERR, 5583 "Invalid port_id=%u or queue_id=%u\n", 5584 port_id, queue_id); 5585 return 0; 5586 } 5587 #endif 5588 5589 /* fetch pointer to queue data */ 5590 p = &rte_eth_fp_ops[port_id]; 5591 qd = p->rxq.data[queue_id]; 5592 5593 #ifdef RTE_ETHDEV_DEBUG_RX 5594 RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0); 5595 5596 if (qd == NULL) { 5597 RTE_ETHDEV_LOG(ERR, "Invalid Rx queue_id=%u for port_id=%u\n", 5598 queue_id, port_id); 5599 return 0; 5600 } 5601 #endif 5602 5603 nb_rx = p->rx_pkt_burst(qd, rx_pkts, nb_pkts); 5604 5605 #ifdef RTE_ETHDEV_RXTX_CALLBACKS 5606 { 5607 void *cb; 5608 5609 /* __ATOMIC_RELEASE memory order was used when the 5610 * call back was inserted into the list. 5611 * Since there is a clear dependency between loading 5612 * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order is 5613 * not required. 5614 */ 5615 cb = __atomic_load_n((void **)&p->rxq.clbk[queue_id], 5616 __ATOMIC_RELAXED); 5617 if (unlikely(cb != NULL)) 5618 nb_rx = rte_eth_call_rx_callbacks(port_id, queue_id, 5619 rx_pkts, nb_rx, nb_pkts, cb); 5620 } 5621 #endif 5622 5623 rte_ethdev_trace_rx_burst(port_id, queue_id, (void **)rx_pkts, nb_rx); 5624 return nb_rx; 5625 } 5626 5627 /** 5628 * Get the number of used descriptors of a Rx queue 5629 * 5630 * @param port_id 5631 * The port identifier of the Ethernet device. 5632 * @param queue_id 5633 * The queue ID on the specific port. 5634 * @return 5635 * The number of used descriptors in the specific queue, or: 5636 * - (-ENODEV) if *port_id* is invalid. 5637 * (-EINVAL) if *queue_id* is invalid 5638 * (-ENOTSUP) if the device does not support this function 5639 */ 5640 static inline int 5641 rte_eth_rx_queue_count(uint16_t port_id, uint16_t queue_id) 5642 { 5643 struct rte_eth_fp_ops *p; 5644 void *qd; 5645 5646 if (port_id >= RTE_MAX_ETHPORTS || 5647 queue_id >= RTE_MAX_QUEUES_PER_PORT) { 5648 RTE_ETHDEV_LOG(ERR, 5649 "Invalid port_id=%u or queue_id=%u\n", 5650 port_id, queue_id); 5651 return -EINVAL; 5652 } 5653 5654 /* fetch pointer to queue data */ 5655 p = &rte_eth_fp_ops[port_id]; 5656 qd = p->rxq.data[queue_id]; 5657 5658 RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); 5659 RTE_FUNC_PTR_OR_ERR_RET(*p->rx_queue_count, -ENOTSUP); 5660 if (qd == NULL) 5661 return -EINVAL; 5662 5663 return (int)(*p->rx_queue_count)(qd); 5664 } 5665 5666 /**@{@name Rx hardware descriptor states 5667 * @see rte_eth_rx_descriptor_status 5668 */ 5669 #define RTE_ETH_RX_DESC_AVAIL 0 /**< Desc available for hw. */ 5670 #define RTE_ETH_RX_DESC_DONE 1 /**< Desc done, filled by hw. */ 5671 #define RTE_ETH_RX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ 5672 /**@}*/ 5673 5674 /** 5675 * Check the status of a Rx descriptor in the queue 5676 * 5677 * It should be called in a similar context than the Rx function: 5678 * - on a dataplane core 5679 * - not concurrently on the same queue 5680 * 5681 * Since it's a dataplane function, no check is performed on port_id and 5682 * queue_id. The caller must therefore ensure that the port is enabled 5683 * and the queue is configured and running. 5684 * 5685 * Note: accessing to a random descriptor in the ring may trigger cache 5686 * misses and have a performance impact. 5687 * 5688 * @param port_id 5689 * A valid port identifier of the Ethernet device which. 5690 * @param queue_id 5691 * A valid Rx queue identifier on this port. 5692 * @param offset 5693 * The offset of the descriptor starting from tail (0 is the next 5694 * packet to be received by the driver). 5695 * 5696 * @return 5697 * - (RTE_ETH_RX_DESC_AVAIL): Descriptor is available for the hardware to 5698 * receive a packet. 5699 * - (RTE_ETH_RX_DESC_DONE): Descriptor is done, it is filled by hw, but 5700 * not yet processed by the driver (i.e. in the receive queue). 5701 * - (RTE_ETH_RX_DESC_UNAVAIL): Descriptor is unavailable, either hold by 5702 * the driver and not yet returned to hw, or reserved by the hw. 5703 * - (-EINVAL) bad descriptor offset. 5704 * - (-ENOTSUP) if the device does not support this function. 5705 * - (-ENODEV) bad port or queue (only if compiled with debug). 5706 */ 5707 static inline int 5708 rte_eth_rx_descriptor_status(uint16_t port_id, uint16_t queue_id, 5709 uint16_t offset) 5710 { 5711 struct rte_eth_fp_ops *p; 5712 void *qd; 5713 5714 #ifdef RTE_ETHDEV_DEBUG_RX 5715 if (port_id >= RTE_MAX_ETHPORTS || 5716 queue_id >= RTE_MAX_QUEUES_PER_PORT) { 5717 RTE_ETHDEV_LOG(ERR, 5718 "Invalid port_id=%u or queue_id=%u\n", 5719 port_id, queue_id); 5720 return -EINVAL; 5721 } 5722 #endif 5723 5724 /* fetch pointer to queue data */ 5725 p = &rte_eth_fp_ops[port_id]; 5726 qd = p->rxq.data[queue_id]; 5727 5728 #ifdef RTE_ETHDEV_DEBUG_RX 5729 RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); 5730 if (qd == NULL) 5731 return -ENODEV; 5732 #endif 5733 RTE_FUNC_PTR_OR_ERR_RET(*p->rx_descriptor_status, -ENOTSUP); 5734 return (*p->rx_descriptor_status)(qd, offset); 5735 } 5736 5737 /**@{@name Tx hardware descriptor states 5738 * @see rte_eth_tx_descriptor_status 5739 */ 5740 #define RTE_ETH_TX_DESC_FULL 0 /**< Desc filled for hw, waiting xmit. */ 5741 #define RTE_ETH_TX_DESC_DONE 1 /**< Desc done, packet is transmitted. */ 5742 #define RTE_ETH_TX_DESC_UNAVAIL 2 /**< Desc used by driver or hw. */ 5743 /**@}*/ 5744 5745 /** 5746 * Check the status of a Tx descriptor in the queue. 5747 * 5748 * It should be called in a similar context than the Tx function: 5749 * - on a dataplane core 5750 * - not concurrently on the same queue 5751 * 5752 * Since it's a dataplane function, no check is performed on port_id and 5753 * queue_id. The caller must therefore ensure that the port is enabled 5754 * and the queue is configured and running. 5755 * 5756 * Note: accessing to a random descriptor in the ring may trigger cache 5757 * misses and have a performance impact. 5758 * 5759 * @param port_id 5760 * A valid port identifier of the Ethernet device which. 5761 * @param queue_id 5762 * A valid Tx queue identifier on this port. 5763 * @param offset 5764 * The offset of the descriptor starting from tail (0 is the place where 5765 * the next packet will be send). 5766 * 5767 * @return 5768 * - (RTE_ETH_TX_DESC_FULL) Descriptor is being processed by the hw, i.e. 5769 * in the transmit queue. 5770 * - (RTE_ETH_TX_DESC_DONE) Hardware is done with this descriptor, it can 5771 * be reused by the driver. 5772 * - (RTE_ETH_TX_DESC_UNAVAIL): Descriptor is unavailable, reserved by the 5773 * driver or the hardware. 5774 * - (-EINVAL) bad descriptor offset. 5775 * - (-ENOTSUP) if the device does not support this function. 5776 * - (-ENODEV) bad port or queue (only if compiled with debug). 5777 */ 5778 static inline int rte_eth_tx_descriptor_status(uint16_t port_id, 5779 uint16_t queue_id, uint16_t offset) 5780 { 5781 struct rte_eth_fp_ops *p; 5782 void *qd; 5783 5784 #ifdef RTE_ETHDEV_DEBUG_TX 5785 if (port_id >= RTE_MAX_ETHPORTS || 5786 queue_id >= RTE_MAX_QUEUES_PER_PORT) { 5787 RTE_ETHDEV_LOG(ERR, 5788 "Invalid port_id=%u or queue_id=%u\n", 5789 port_id, queue_id); 5790 return -EINVAL; 5791 } 5792 #endif 5793 5794 /* fetch pointer to queue data */ 5795 p = &rte_eth_fp_ops[port_id]; 5796 qd = p->txq.data[queue_id]; 5797 5798 #ifdef RTE_ETHDEV_DEBUG_TX 5799 RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, -ENODEV); 5800 if (qd == NULL) 5801 return -ENODEV; 5802 #endif 5803 RTE_FUNC_PTR_OR_ERR_RET(*p->tx_descriptor_status, -ENOTSUP); 5804 return (*p->tx_descriptor_status)(qd, offset); 5805 } 5806 5807 /** 5808 * @internal 5809 * Helper routine for rte_eth_tx_burst(). 5810 * Should be called before entry PMD's rte_eth_tx_bulk implementation. 5811 * Does necessary pre-processing - invokes Tx callbacks if any, etc. 5812 * 5813 * @param port_id 5814 * The port identifier of the Ethernet device. 5815 * @param queue_id 5816 * The index of the transmit queue through which output packets must be 5817 * sent. 5818 * @param tx_pkts 5819 * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures 5820 * which contain the output packets. 5821 * @param nb_pkts 5822 * The maximum number of packets to transmit. 5823 * @return 5824 * The number of output packets to transmit. 5825 */ 5826 uint16_t rte_eth_call_tx_callbacks(uint16_t port_id, uint16_t queue_id, 5827 struct rte_mbuf **tx_pkts, uint16_t nb_pkts, void *opaque); 5828 5829 /** 5830 * Send a burst of output packets on a transmit queue of an Ethernet device. 5831 * 5832 * The rte_eth_tx_burst() function is invoked to transmit output packets 5833 * on the output queue *queue_id* of the Ethernet device designated by its 5834 * *port_id*. 5835 * The *nb_pkts* parameter is the number of packets to send which are 5836 * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them 5837 * allocated from a pool created with rte_pktmbuf_pool_create(). 5838 * The rte_eth_tx_burst() function loops, sending *nb_pkts* packets, 5839 * up to the number of transmit descriptors available in the Tx ring of the 5840 * transmit queue. 5841 * For each packet to send, the rte_eth_tx_burst() function performs 5842 * the following operations: 5843 * 5844 * - Pick up the next available descriptor in the transmit ring. 5845 * 5846 * - Free the network buffer previously sent with that descriptor, if any. 5847 * 5848 * - Initialize the transmit descriptor with the information provided 5849 * in the *rte_mbuf data structure. 5850 * 5851 * In the case of a segmented packet composed of a list of *rte_mbuf* buffers, 5852 * the rte_eth_tx_burst() function uses several transmit descriptors 5853 * of the ring. 5854 * 5855 * The rte_eth_tx_burst() function returns the number of packets it 5856 * actually sent. A return value equal to *nb_pkts* means that all packets 5857 * have been sent, and this is likely to signify that other output packets 5858 * could be immediately transmitted again. Applications that implement a 5859 * "send as many packets to transmit as possible" policy can check this 5860 * specific case and keep invoking the rte_eth_tx_burst() function until 5861 * a value less than *nb_pkts* is returned. 5862 * 5863 * It is the responsibility of the rte_eth_tx_burst() function to 5864 * transparently free the memory buffers of packets previously sent. 5865 * This feature is driven by the *tx_free_thresh* value supplied to the 5866 * rte_eth_dev_configure() function at device configuration time. 5867 * When the number of free Tx descriptors drops below this threshold, the 5868 * rte_eth_tx_burst() function must [attempt to] free the *rte_mbuf* buffers 5869 * of those packets whose transmission was effectively completed. 5870 * 5871 * If the PMD is RTE_ETH_TX_OFFLOAD_MT_LOCKFREE capable, multiple threads can 5872 * invoke this function concurrently on the same Tx queue without SW lock. 5873 * @see rte_eth_dev_info_get, struct rte_eth_txconf::offloads 5874 * 5875 * @see rte_eth_tx_prepare to perform some prior checks or adjustments 5876 * for offloads. 5877 * 5878 * @param port_id 5879 * The port identifier of the Ethernet device. 5880 * @param queue_id 5881 * The index of the transmit queue through which output packets must be 5882 * sent. 5883 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 5884 * to rte_eth_dev_configure(). 5885 * @param tx_pkts 5886 * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures 5887 * which contain the output packets. 5888 * @param nb_pkts 5889 * The maximum number of packets to transmit. 5890 * @return 5891 * The number of output packets actually stored in transmit descriptors of 5892 * the transmit ring. The return value can be less than the value of the 5893 * *tx_pkts* parameter when the transmit ring is full or has been filled up. 5894 */ 5895 static inline uint16_t 5896 rte_eth_tx_burst(uint16_t port_id, uint16_t queue_id, 5897 struct rte_mbuf **tx_pkts, uint16_t nb_pkts) 5898 { 5899 struct rte_eth_fp_ops *p; 5900 void *qd; 5901 5902 #ifdef RTE_ETHDEV_DEBUG_TX 5903 if (port_id >= RTE_MAX_ETHPORTS || 5904 queue_id >= RTE_MAX_QUEUES_PER_PORT) { 5905 RTE_ETHDEV_LOG(ERR, 5906 "Invalid port_id=%u or queue_id=%u\n", 5907 port_id, queue_id); 5908 return 0; 5909 } 5910 #endif 5911 5912 /* fetch pointer to queue data */ 5913 p = &rte_eth_fp_ops[port_id]; 5914 qd = p->txq.data[queue_id]; 5915 5916 #ifdef RTE_ETHDEV_DEBUG_TX 5917 RTE_ETH_VALID_PORTID_OR_ERR_RET(port_id, 0); 5918 5919 if (qd == NULL) { 5920 RTE_ETHDEV_LOG(ERR, "Invalid Tx queue_id=%u for port_id=%u\n", 5921 queue_id, port_id); 5922 return 0; 5923 } 5924 #endif 5925 5926 #ifdef RTE_ETHDEV_RXTX_CALLBACKS 5927 { 5928 void *cb; 5929 5930 /* __ATOMIC_RELEASE memory order was used when the 5931 * call back was inserted into the list. 5932 * Since there is a clear dependency between loading 5933 * cb and cb->fn/cb->next, __ATOMIC_ACQUIRE memory order is 5934 * not required. 5935 */ 5936 cb = __atomic_load_n((void **)&p->txq.clbk[queue_id], 5937 __ATOMIC_RELAXED); 5938 if (unlikely(cb != NULL)) 5939 nb_pkts = rte_eth_call_tx_callbacks(port_id, queue_id, 5940 tx_pkts, nb_pkts, cb); 5941 } 5942 #endif 5943 5944 nb_pkts = p->tx_pkt_burst(qd, tx_pkts, nb_pkts); 5945 5946 rte_ethdev_trace_tx_burst(port_id, queue_id, (void **)tx_pkts, nb_pkts); 5947 return nb_pkts; 5948 } 5949 5950 /** 5951 * Process a burst of output packets on a transmit queue of an Ethernet device. 5952 * 5953 * The rte_eth_tx_prepare() function is invoked to prepare output packets to be 5954 * transmitted on the output queue *queue_id* of the Ethernet device designated 5955 * by its *port_id*. 5956 * The *nb_pkts* parameter is the number of packets to be prepared which are 5957 * supplied in the *tx_pkts* array of *rte_mbuf* structures, each of them 5958 * allocated from a pool created with rte_pktmbuf_pool_create(). 5959 * For each packet to send, the rte_eth_tx_prepare() function performs 5960 * the following operations: 5961 * 5962 * - Check if packet meets devices requirements for Tx offloads. 5963 * 5964 * - Check limitations about number of segments. 5965 * 5966 * - Check additional requirements when debug is enabled. 5967 * 5968 * - Update and/or reset required checksums when Tx offload is set for packet. 5969 * 5970 * Since this function can modify packet data, provided mbufs must be safely 5971 * writable (e.g. modified data cannot be in shared segment). 5972 * 5973 * The rte_eth_tx_prepare() function returns the number of packets ready to be 5974 * sent. A return value equal to *nb_pkts* means that all packets are valid and 5975 * ready to be sent, otherwise stops processing on the first invalid packet and 5976 * leaves the rest packets untouched. 5977 * 5978 * When this functionality is not implemented in the driver, all packets are 5979 * are returned untouched. 5980 * 5981 * @param port_id 5982 * The port identifier of the Ethernet device. 5983 * The value must be a valid port ID. 5984 * @param queue_id 5985 * The index of the transmit queue through which output packets must be 5986 * sent. 5987 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 5988 * to rte_eth_dev_configure(). 5989 * @param tx_pkts 5990 * The address of an array of *nb_pkts* pointers to *rte_mbuf* structures 5991 * which contain the output packets. 5992 * @param nb_pkts 5993 * The maximum number of packets to process. 5994 * @return 5995 * The number of packets correct and ready to be sent. The return value can be 5996 * less than the value of the *tx_pkts* parameter when some packet doesn't 5997 * meet devices requirements with rte_errno set appropriately: 5998 * - EINVAL: offload flags are not correctly set 5999 * - ENOTSUP: the offload feature is not supported by the hardware 6000 * - ENODEV: if *port_id* is invalid (with debug enabled only) 6001 * 6002 */ 6003 6004 #ifndef RTE_ETHDEV_TX_PREPARE_NOOP 6005 6006 static inline uint16_t 6007 rte_eth_tx_prepare(uint16_t port_id, uint16_t queue_id, 6008 struct rte_mbuf **tx_pkts, uint16_t nb_pkts) 6009 { 6010 struct rte_eth_fp_ops *p; 6011 void *qd; 6012 6013 #ifdef RTE_ETHDEV_DEBUG_TX 6014 if (port_id >= RTE_MAX_ETHPORTS || 6015 queue_id >= RTE_MAX_QUEUES_PER_PORT) { 6016 RTE_ETHDEV_LOG(ERR, 6017 "Invalid port_id=%u or queue_id=%u\n", 6018 port_id, queue_id); 6019 rte_errno = ENODEV; 6020 return 0; 6021 } 6022 #endif 6023 6024 /* fetch pointer to queue data */ 6025 p = &rte_eth_fp_ops[port_id]; 6026 qd = p->txq.data[queue_id]; 6027 6028 #ifdef RTE_ETHDEV_DEBUG_TX 6029 if (!rte_eth_dev_is_valid_port(port_id)) { 6030 RTE_ETHDEV_LOG(ERR, "Invalid Tx port_id=%u\n", port_id); 6031 rte_errno = ENODEV; 6032 return 0; 6033 } 6034 if (qd == NULL) { 6035 RTE_ETHDEV_LOG(ERR, "Invalid Tx queue_id=%u for port_id=%u\n", 6036 queue_id, port_id); 6037 rte_errno = EINVAL; 6038 return 0; 6039 } 6040 #endif 6041 6042 if (!p->tx_pkt_prepare) 6043 return nb_pkts; 6044 6045 return p->tx_pkt_prepare(qd, tx_pkts, nb_pkts); 6046 } 6047 6048 #else 6049 6050 /* 6051 * Native NOOP operation for compilation targets which doesn't require any 6052 * preparations steps, and functional NOOP may introduce unnecessary performance 6053 * drop. 6054 * 6055 * Generally this is not a good idea to turn it on globally and didn't should 6056 * be used if behavior of tx_preparation can change. 6057 */ 6058 6059 static inline uint16_t 6060 rte_eth_tx_prepare(__rte_unused uint16_t port_id, 6061 __rte_unused uint16_t queue_id, 6062 __rte_unused struct rte_mbuf **tx_pkts, uint16_t nb_pkts) 6063 { 6064 return nb_pkts; 6065 } 6066 6067 #endif 6068 6069 /** 6070 * Send any packets queued up for transmission on a port and HW queue 6071 * 6072 * This causes an explicit flush of packets previously buffered via the 6073 * rte_eth_tx_buffer() function. It returns the number of packets successfully 6074 * sent to the NIC, and calls the error callback for any unsent packets. Unless 6075 * explicitly set up otherwise, the default callback simply frees the unsent 6076 * packets back to the owning mempool. 6077 * 6078 * @param port_id 6079 * The port identifier of the Ethernet device. 6080 * @param queue_id 6081 * The index of the transmit queue through which output packets must be 6082 * sent. 6083 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 6084 * to rte_eth_dev_configure(). 6085 * @param buffer 6086 * Buffer of packets to be transmit. 6087 * @return 6088 * The number of packets successfully sent to the Ethernet device. The error 6089 * callback is called for any packets which could not be sent. 6090 */ 6091 static inline uint16_t 6092 rte_eth_tx_buffer_flush(uint16_t port_id, uint16_t queue_id, 6093 struct rte_eth_dev_tx_buffer *buffer) 6094 { 6095 uint16_t sent; 6096 uint16_t to_send = buffer->length; 6097 6098 if (to_send == 0) 6099 return 0; 6100 6101 sent = rte_eth_tx_burst(port_id, queue_id, buffer->pkts, to_send); 6102 6103 buffer->length = 0; 6104 6105 /* All packets sent, or to be dealt with by callback below */ 6106 if (unlikely(sent != to_send)) 6107 buffer->error_callback(&buffer->pkts[sent], 6108 (uint16_t)(to_send - sent), 6109 buffer->error_userdata); 6110 6111 return sent; 6112 } 6113 6114 /** 6115 * Buffer a single packet for future transmission on a port and queue 6116 * 6117 * This function takes a single mbuf/packet and buffers it for later 6118 * transmission on the particular port and queue specified. Once the buffer is 6119 * full of packets, an attempt will be made to transmit all the buffered 6120 * packets. In case of error, where not all packets can be transmitted, a 6121 * callback is called with the unsent packets as a parameter. If no callback 6122 * is explicitly set up, the unsent packets are just freed back to the owning 6123 * mempool. The function returns the number of packets actually sent i.e. 6124 * 0 if no buffer flush occurred, otherwise the number of packets successfully 6125 * flushed 6126 * 6127 * @param port_id 6128 * The port identifier of the Ethernet device. 6129 * @param queue_id 6130 * The index of the transmit queue through which output packets must be 6131 * sent. 6132 * The value must be in the range [0, nb_tx_queue - 1] previously supplied 6133 * to rte_eth_dev_configure(). 6134 * @param buffer 6135 * Buffer used to collect packets to be sent. 6136 * @param tx_pkt 6137 * Pointer to the packet mbuf to be sent. 6138 * @return 6139 * 0 = packet has been buffered for later transmission 6140 * N > 0 = packet has been buffered, and the buffer was subsequently flushed, 6141 * causing N packets to be sent, and the error callback to be called for 6142 * the rest. 6143 */ 6144 static __rte_always_inline uint16_t 6145 rte_eth_tx_buffer(uint16_t port_id, uint16_t queue_id, 6146 struct rte_eth_dev_tx_buffer *buffer, struct rte_mbuf *tx_pkt) 6147 { 6148 buffer->pkts[buffer->length++] = tx_pkt; 6149 if (buffer->length < buffer->size) 6150 return 0; 6151 6152 return rte_eth_tx_buffer_flush(port_id, queue_id, buffer); 6153 } 6154 6155 #ifdef __cplusplus 6156 } 6157 #endif 6158 6159 #endif /* _RTE_ETHDEV_H_ */ 6160