1 /*- 2 * BSD LICENSE 3 * 4 * Copyright(c) 2010-2016 Intel Corporation. All rights reserved. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * * Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * * Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in 15 * the documentation and/or other materials provided with the 16 * distribution. 17 * * Neither the name of Intel Corporation nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 24 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 25 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 26 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 27 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 28 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 29 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 30 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 31 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 32 */ 33 34 #include <stdint.h> 35 #include <stdio.h> 36 #include <inttypes.h> 37 #include <stdarg.h> 38 #include <errno.h> 39 #include <sys/queue.h> 40 #include <stdlib.h> 41 #include <getopt.h> 42 #include <string.h> 43 44 #include <rte_common.h> 45 #include <rte_malloc.h> 46 #include <rte_memory.h> 47 #include <rte_memzone.h> 48 #include <rte_eal.h> 49 #include <rte_atomic.h> 50 #include <rte_branch_prediction.h> 51 #include <rte_log.h> 52 #include <rte_per_lcore.h> 53 #include <rte_lcore.h> 54 #include <rte_ring.h> 55 #include <rte_launch.h> 56 #include <rte_debug.h> 57 #include <rte_mempool.h> 58 #include <rte_mbuf.h> 59 #include <rte_interrupts.h> 60 #include <rte_ether.h> 61 #include <rte_ethdev.h> 62 #include <rte_string_fns.h> 63 64 #include "common.h" 65 66 /* Number of packets to attempt to read from queue */ 67 #define PKT_READ_SIZE ((uint16_t)32) 68 69 /* our client id number - tells us which rx queue to read, and NIC TX 70 * queue to write to. */ 71 static uint8_t client_id = 0; 72 73 #define MBQ_CAPACITY 32 74 75 /* maps input ports to output ports for packets */ 76 static uint16_t output_ports[RTE_MAX_ETHPORTS]; 77 78 /* buffers up a set of packet that are ready to send */ 79 struct rte_eth_dev_tx_buffer *tx_buffer[RTE_MAX_ETHPORTS]; 80 81 /* shared data from server. We update statistics here */ 82 static volatile struct tx_stats *tx_stats; 83 84 85 /* 86 * print a usage message 87 */ 88 static void 89 usage(const char *progname) 90 { 91 printf("Usage: %s [EAL args] -- -n <client_id>\n\n", progname); 92 } 93 94 /* 95 * Convert the client id number from a string to an int. 96 */ 97 static int 98 parse_client_num(const char *client) 99 { 100 char *end = NULL; 101 unsigned long temp; 102 103 if (client == NULL || *client == '\0') 104 return -1; 105 106 temp = strtoul(client, &end, 10); 107 if (end == NULL || *end != '\0') 108 return -1; 109 110 client_id = (uint8_t)temp; 111 return 0; 112 } 113 114 /* 115 * Parse the application arguments to the client app. 116 */ 117 static int 118 parse_app_args(int argc, char *argv[]) 119 { 120 int option_index, opt; 121 char **argvopt = argv; 122 const char *progname = NULL; 123 static struct option lgopts[] = { /* no long options */ 124 {NULL, 0, 0, 0 } 125 }; 126 progname = argv[0]; 127 128 while ((opt = getopt_long(argc, argvopt, "n:", lgopts, 129 &option_index)) != EOF){ 130 switch (opt){ 131 case 'n': 132 if (parse_client_num(optarg) != 0){ 133 usage(progname); 134 return -1; 135 } 136 break; 137 default: 138 usage(progname); 139 return -1; 140 } 141 } 142 return 0; 143 } 144 145 /* 146 * Tx buffer error callback 147 */ 148 static void 149 flush_tx_error_callback(struct rte_mbuf **unsent, uint16_t count, 150 void *userdata) { 151 int i; 152 uint16_t port_id = (uintptr_t)userdata; 153 154 tx_stats->tx_drop[port_id] += count; 155 156 /* free the mbufs which failed from transmit */ 157 for (i = 0; i < count; i++) 158 rte_pktmbuf_free(unsent[i]); 159 160 } 161 162 static void 163 configure_tx_buffer(uint16_t port_id, uint16_t size) 164 { 165 int ret; 166 167 /* Initialize TX buffers */ 168 tx_buffer[port_id] = rte_zmalloc_socket("tx_buffer", 169 RTE_ETH_TX_BUFFER_SIZE(size), 0, 170 rte_eth_dev_socket_id(port_id)); 171 if (tx_buffer[port_id] == NULL) 172 rte_exit(EXIT_FAILURE, "Cannot allocate buffer for tx on port %u\n", 173 port_id); 174 175 rte_eth_tx_buffer_init(tx_buffer[port_id], size); 176 177 ret = rte_eth_tx_buffer_set_err_callback(tx_buffer[port_id], 178 flush_tx_error_callback, (void *)(intptr_t)port_id); 179 if (ret < 0) 180 rte_exit(EXIT_FAILURE, 181 "Cannot set error callback for tx buffer on port %u\n", 182 port_id); 183 } 184 185 /* 186 * set up output ports so that all traffic on port gets sent out 187 * its paired port. Index using actual port numbers since that is 188 * what comes in the mbuf structure. 189 */ 190 static void 191 configure_output_ports(const struct port_info *ports) 192 { 193 int i; 194 if (ports->num_ports > RTE_MAX_ETHPORTS) 195 rte_exit(EXIT_FAILURE, "Too many ethernet ports. RTE_MAX_ETHPORTS = %u\n", 196 (unsigned)RTE_MAX_ETHPORTS); 197 for (i = 0; i < ports->num_ports - 1; i+=2){ 198 uint16_t p1 = ports->id[i]; 199 uint16_t p2 = ports->id[i+1]; 200 output_ports[p1] = p2; 201 output_ports[p2] = p1; 202 203 configure_tx_buffer(p1, MBQ_CAPACITY); 204 configure_tx_buffer(p2, MBQ_CAPACITY); 205 206 } 207 } 208 209 /* 210 * This function performs routing of packets 211 * Just sends each input packet out an output port based solely on the input 212 * port it arrived on. 213 */ 214 static void 215 handle_packet(struct rte_mbuf *buf) 216 { 217 int sent; 218 const uint16_t in_port = buf->port; 219 const uint16_t out_port = output_ports[in_port]; 220 struct rte_eth_dev_tx_buffer *buffer = tx_buffer[out_port]; 221 222 sent = rte_eth_tx_buffer(out_port, client_id, buffer, buf); 223 if (sent) 224 tx_stats->tx[out_port] += sent; 225 226 } 227 228 /* 229 * Application main function - loops through 230 * receiving and processing packets. Never returns 231 */ 232 int 233 main(int argc, char *argv[]) 234 { 235 const struct rte_memzone *mz; 236 struct rte_ring *rx_ring; 237 struct rte_mempool *mp; 238 struct port_info *ports; 239 int need_flush = 0; /* indicates whether we have unsent packets */ 240 int retval; 241 void *pkts[PKT_READ_SIZE]; 242 uint16_t sent; 243 244 if ((retval = rte_eal_init(argc, argv)) < 0) 245 return -1; 246 argc -= retval; 247 argv += retval; 248 249 if (parse_app_args(argc, argv) < 0) 250 rte_exit(EXIT_FAILURE, "Invalid command-line arguments\n"); 251 252 if (rte_eth_dev_count() == 0) 253 rte_exit(EXIT_FAILURE, "No Ethernet ports - bye\n"); 254 255 rx_ring = rte_ring_lookup(get_rx_queue_name(client_id)); 256 if (rx_ring == NULL) 257 rte_exit(EXIT_FAILURE, "Cannot get RX ring - is server process running?\n"); 258 259 mp = rte_mempool_lookup(PKTMBUF_POOL_NAME); 260 if (mp == NULL) 261 rte_exit(EXIT_FAILURE, "Cannot get mempool for mbufs\n"); 262 263 mz = rte_memzone_lookup(MZ_PORT_INFO); 264 if (mz == NULL) 265 rte_exit(EXIT_FAILURE, "Cannot get port info structure\n"); 266 ports = mz->addr; 267 tx_stats = &(ports->tx_stats[client_id]); 268 269 configure_output_ports(ports); 270 271 RTE_LOG(INFO, APP, "Finished Process Init.\n"); 272 273 printf("\nClient process %d handling packets\n", client_id); 274 printf("[Press Ctrl-C to quit ...]\n"); 275 276 for (;;) { 277 uint16_t i, rx_pkts; 278 uint16_t port; 279 280 rx_pkts = rte_ring_dequeue_burst(rx_ring, pkts, 281 PKT_READ_SIZE, NULL); 282 283 if (unlikely(rx_pkts == 0)){ 284 if (need_flush) 285 for (port = 0; port < ports->num_ports; port++) { 286 sent = rte_eth_tx_buffer_flush(ports->id[port], client_id, 287 tx_buffer[port]); 288 if (unlikely(sent)) 289 tx_stats->tx[port] += sent; 290 } 291 need_flush = 0; 292 continue; 293 } 294 295 for (i = 0; i < rx_pkts; i++) 296 handle_packet(pkts[i]); 297 298 need_flush = 1; 299 } 300 } 301