xref: /dpdk/drivers/net/virtio/virtio_pci_ethdev.c (revision 7793d29359e8996c7028d976eeeaa21024139fef)

/* SPDX-License-Identifier: BSD-3-Clause
 * Copyright(c) 2010-2016 Intel Corporation
 */

#include <stdint.h>
#include <string.h>
#include <stdio.h>
#include <errno.h>
#include <unistd.h>

#include <ethdev_driver.h>
#include <ethdev_pci.h>
#include <rte_pci.h>
#include <rte_bus_pci.h>
#include <rte_errno.h>

#include <rte_memory.h>
#include <rte_eal.h>
#include <rte_dev.h>
#include <rte_kvargs.h>

#include "virtio_ethdev.h"
#include "virtio_pci.h"
#include "virtio_logs.h"

/*
 * The set of PCI devices this driver supports
 */
static const struct rte_pci_id pci_id_virtio_map[] = {
	{ RTE_PCI_DEVICE(VIRTIO_PCI_VENDORID, VIRTIO_PCI_LEGACY_DEVICEID_NET) },
	{ RTE_PCI_DEVICE(VIRTIO_PCI_VENDORID, VIRTIO_PCI_MODERN_DEVICEID_NET) },
	{ .vendor_id = 0, /* sentinel */ },
};


/*
 * Remap the PCI device again (IO port map for legacy device and
 * memory map for modern device), so that the secondary process
 * could have the PCI initiated correctly.
 */
static int
virtio_remap_pci(struct rte_pci_device *pci_dev, struct virtio_hw *hw)
{
	if (hw->bus_type == VIRTIO_BUS_PCI_MODERN) {
		/*
		 * We don't have to re-parse the PCI config space, since
		 * rte_pci_map_device() makes sure the mapped address
		 * in secondary process would equal to the one mapped in
		 * the primary process: error will be returned if that
		 * requirement is not met.
		 *
		 * That said, we could simply reuse all cap pointers
		 * (such as dev_cfg, common_cfg, etc.) parsed from the
		 * primary process, which is stored in shared memory.
		 */
		if (rte_pci_map_device(pci_dev)) {
			PMD_INIT_LOG(DEBUG, "failed to map pci device!");
			return -1;
		}
	} else if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY) {
		if (rte_pci_ioport_map(pci_dev, 0, VTPCI_IO(hw)) < 0)
			return -1;
	}

	return 0;
}

static int
eth_virtio_pci_init(struct rte_eth_dev *eth_dev)
{
	struct virtio_pci_dev *dev = eth_dev->data->dev_private;
	struct virtio_hw *hw = &dev->hw;
	struct rte_pci_device *pci_dev = RTE_ETH_DEV_TO_PCI(eth_dev);
	int ret;

	VTPCI_DEV(hw) = pci_dev;

	if (rte_eal_process_type() == RTE_PROC_PRIMARY) {
		ret = vtpci_init(RTE_ETH_DEV_TO_PCI(eth_dev), hw);
		if (ret) {
			PMD_INIT_LOG(ERR, "Failed to init PCI device\n");
			return -1;
		}
	} else {
		ret = virtio_remap_pci(RTE_ETH_DEV_TO_PCI(eth_dev), hw);
		if (ret < 0) {
			PMD_INIT_LOG(ERR, "Failed to remap PCI device\n");
			return -1;
		}
	}

	ret = eth_virtio_dev_init(eth_dev);
	if (ret < 0) {
		PMD_INIT_LOG(ERR, "Failed to init virtio device\n");
		goto err_unmap;
	}

	PMD_INIT_LOG(DEBUG, "port %d vendorID=0x%x deviceID=0x%x",
		eth_dev->data->port_id, pci_dev->id.vendor_id,
		pci_dev->id.device_id);

	return 0;

err_unmap:
	rte_pci_unmap_device(RTE_ETH_DEV_TO_PCI(eth_dev));
	if (hw->bus_type == VIRTIO_BUS_PCI_LEGACY)
		rte_pci_ioport_unmap(VTPCI_IO(hw));

	return ret;
}

static int
eth_virtio_pci_uninit(struct rte_eth_dev *eth_dev)
{
	int ret;
	PMD_INIT_FUNC_TRACE();

	if (rte_eal_process_type() == RTE_PROC_SECONDARY)
		return 0;

	ret = virtio_dev_stop(eth_dev);
	virtio_dev_close(eth_dev);

	PMD_INIT_LOG(DEBUG, "dev_uninit completed");

	return ret;
}

static int vdpa_check_handler(__rte_unused const char *key,
		const char *value, void *ret_val)
{
	if (strcmp(value, "1") == 0)
		*(int *)ret_val = 1;
	else
		*(int *)ret_val = 0;

	return 0;
}

#define VIRTIO_ARG_VDPA       "vdpa"

static int
virtio_pci_devargs_parse(struct rte_devargs *devargs, int *vdpa)
{
	struct rte_kvargs *kvlist;
	int ret = 0;

	if (devargs == NULL)
		return 0;

	kvlist = rte_kvargs_parse(devargs->args, NULL);
	if (kvlist == NULL) {
		PMD_INIT_LOG(ERR, "error when parsing param");
		return 0;
	}

	if (rte_kvargs_count(kvlist, VIRTIO_ARG_VDPA) == 1) {
		/* vdpa mode selected when there's a key-value pair:
		 * vdpa=1
		 */
		ret = rte_kvargs_process(kvlist, VIRTIO_ARG_VDPA,
				vdpa_check_handler, vdpa);
		if (ret < 0)
			PMD_INIT_LOG(ERR, "Failed to parse %s", VIRTIO_ARG_VDPA);
	}

	rte_kvargs_free(kvlist);

	return ret;
}

static int eth_virtio_pci_probe(struct rte_pci_driver *pci_drv __rte_unused,
	struct rte_pci_device *pci_dev)
{
	int vdpa = 0;
	int ret = 0;

	ret = virtio_pci_devargs_parse(pci_dev->device.devargs, &vdpa);
	if (ret < 0) {
		PMD_INIT_LOG(ERR, "devargs parsing is failed");
		return ret;
	}
	/* virtio pmd skips probe if device needs to work in vdpa mode */
	if (vdpa == 1)
		return 1;

	return rte_eth_dev_pci_generic_probe(pci_dev, sizeof(struct virtio_pci_dev),
		eth_virtio_pci_init);
}

static int eth_virtio_pci_remove(struct rte_pci_device *pci_dev)
{
	int ret;

	ret = rte_eth_dev_pci_generic_remove(pci_dev, eth_virtio_pci_uninit);
	/* Port has already been released by close. */
	if (ret == -ENODEV)
		ret = 0;
	return ret;
}

static struct rte_pci_driver rte_virtio_net_pci_pmd = {
	.driver = {
		.name = "net_virtio",
	},
	.id_table = pci_id_virtio_map,
	.drv_flags = 0,
	.probe = eth_virtio_pci_probe,
	.remove = eth_virtio_pci_remove,
};

RTE_INIT(rte_virtio_net_pci_pmd_init)
{
	rte_eal_iopl_init();
	rte_pci_register(&rte_virtio_net_pci_pmd);
}

RTE_PMD_REGISTER_PCI_TABLE(net_virtio, pci_id_virtio_map);
RTE_PMD_REGISTER_KMOD_DEP(net_virtio, "* igb_uio | uio_pci_generic | vfio-pci");
RTE_PMD_EXPORT_NAME(net_virtio, __COUNTER__);