xref: /dpdk/drivers/net/mlx5/mlx5_rxtx_vec.c (revision 7adf992fb9bf7162a7edc45b50d10fbb1d57824d)
1 /* SPDX-License-Identifier: BSD-3-Clause
2  * Copyright 2017 6WIND S.A.
3  * Copyright 2017 Mellanox Technologies, Ltd
4  */
5 
6 #include <stdint.h>
7 #include <string.h>
8 #include <stdlib.h>
9 
10 /* Verbs header. */
11 /* ISO C doesn't support unnamed structs/unions, disabling -pedantic. */
12 #ifdef PEDANTIC
13 #pragma GCC diagnostic ignored "-Wpedantic"
14 #endif
15 #include <infiniband/verbs.h>
16 #include <infiniband/mlx5dv.h>
17 #ifdef PEDANTIC
18 #pragma GCC diagnostic error "-Wpedantic"
19 #endif
20 
21 #include <rte_mbuf.h>
22 #include <rte_mempool.h>
23 #include <rte_prefetch.h>
24 
25 #include <mlx5_prm.h>
26 
27 #include "mlx5_defs.h"
28 #include "mlx5.h"
29 #include "mlx5_utils.h"
30 #include "mlx5_rxtx.h"
31 #include "mlx5_rxtx_vec.h"
32 #include "mlx5_autoconf.h"
33 
34 #if defined RTE_ARCH_X86_64
35 #include "mlx5_rxtx_vec_sse.h"
36 #elif defined RTE_ARCH_ARM64
37 #include "mlx5_rxtx_vec_neon.h"
38 #elif defined RTE_ARCH_PPC_64
39 #include "mlx5_rxtx_vec_altivec.h"
40 #else
41 #error "This should not be compiled if SIMD instructions are not supported."
42 #endif
43 
44 /**
45  * Skip error packets.
46  *
47  * @param rxq
48  *   Pointer to RX queue structure.
49  * @param[out] pkts
50  *   Array to store received packets.
51  * @param pkts_n
52  *   Maximum number of packets in array.
53  *
54  * @return
55  *   Number of packets successfully received (<= pkts_n).
56  */
57 static uint16_t
58 rxq_handle_pending_error(struct mlx5_rxq_data *rxq, struct rte_mbuf **pkts,
59 			 uint16_t pkts_n)
60 {
61 	uint16_t n = 0;
62 	unsigned int i;
63 #ifdef MLX5_PMD_SOFT_COUNTERS
64 	uint32_t err_bytes = 0;
65 #endif
66 
67 	for (i = 0; i < pkts_n; ++i) {
68 		struct rte_mbuf *pkt = pkts[i];
69 
70 		if (pkt->packet_type == RTE_PTYPE_ALL_MASK || rxq->err_state) {
71 #ifdef MLX5_PMD_SOFT_COUNTERS
72 			err_bytes += PKT_LEN(pkt);
73 #endif
74 			rte_pktmbuf_free_seg(pkt);
75 		} else {
76 			pkts[n++] = pkt;
77 		}
78 	}
79 	rxq->stats.idropped += (pkts_n - n);
80 #ifdef MLX5_PMD_SOFT_COUNTERS
81 	/* Correct counters of errored completions. */
82 	rxq->stats.ipackets -= (pkts_n - n);
83 	rxq->stats.ibytes -= err_bytes;
84 #endif
85 	mlx5_rx_err_handle(rxq, 1);
86 	return n;
87 }
88 
89 /**
90  * DPDK callback for vectorized RX.
91  *
92  * @param dpdk_rxq
93  *   Generic pointer to RX queue structure.
94  * @param[out] pkts
95  *   Array to store received packets.
96  * @param pkts_n
97  *   Maximum number of packets in array.
98  *
99  * @return
100  *   Number of packets successfully received (<= pkts_n).
101  */
102 uint16_t
103 mlx5_rx_burst_vec(void *dpdk_rxq, struct rte_mbuf **pkts, uint16_t pkts_n)
104 {
105 	struct mlx5_rxq_data *rxq = dpdk_rxq;
106 	uint16_t nb_rx;
107 	uint64_t err = 0;
108 
109 	nb_rx = rxq_burst_v(rxq, pkts, pkts_n, &err);
110 	if (unlikely(err | rxq->err_state))
111 		nb_rx = rxq_handle_pending_error(rxq, pkts, nb_rx);
112 	return nb_rx;
113 }
114 
115 /**
116  * Check a RX queue can support vectorized RX.
117  *
118  * @param rxq
119  *   Pointer to RX queue.
120  *
121  * @return
122  *   1 if supported, negative errno value if not.
123  */
124 int __attribute__((cold))
125 mlx5_rxq_check_vec_support(struct mlx5_rxq_data *rxq)
126 {
127 	struct mlx5_rxq_ctrl *ctrl =
128 		container_of(rxq, struct mlx5_rxq_ctrl, rxq);
129 
130 	if (mlx5_mprq_enabled(ETH_DEV(ctrl->priv)))
131 		return -ENOTSUP;
132 	if (!ctrl->priv->config.rx_vec_en || rxq->sges_n != 0)
133 		return -ENOTSUP;
134 	if (rxq->lro)
135 		return -ENOTSUP;
136 	return 1;
137 }
138 
139 /**
140  * Check a device can support vectorized RX.
141  *
142  * @param dev
143  *   Pointer to Ethernet device.
144  *
145  * @return
146  *   1 if supported, negative errno value if not.
147  */
148 int __attribute__((cold))
149 mlx5_check_vec_rx_support(struct rte_eth_dev *dev)
150 {
151 	struct mlx5_priv *priv = dev->data->dev_private;
152 	uint16_t i;
153 
154 	if (!priv->config.rx_vec_en)
155 		return -ENOTSUP;
156 	if (mlx5_mprq_enabled(dev))
157 		return -ENOTSUP;
158 	/* All the configured queues should support. */
159 	for (i = 0; i < priv->rxqs_n; ++i) {
160 		struct mlx5_rxq_data *rxq = (*priv->rxqs)[i];
161 
162 		if (!rxq)
163 			continue;
164 		if (mlx5_rxq_check_vec_support(rxq) < 0)
165 			break;
166 	}
167 	if (i != priv->rxqs_n)
168 		return -ENOTSUP;
169 	return 1;
170 }
171