1.. BSD LICENSE 2 Copyright(c) 2010-2014 Intel Corporation. All rights reserved. 3 All rights reserved. 4 5 Redistribution and use in source and binary forms, with or without 6 modification, are permitted provided that the following conditions 7 are met: 8 9 * Redistributions of source code must retain the above copyright 10 notice, this list of conditions and the following disclaimer. 11 * Redistributions in binary form must reproduce the above copyright 12 notice, this list of conditions and the following disclaimer in 13 the documentation and/or other materials provided with the 14 distribution. 15 * Neither the name of Intel Corporation nor the names of its 16 contributors may be used to endorse or promote products derived 17 from this software without specific prior written permission. 18 19 THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 20 "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 21 LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR 22 A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT 23 OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 24 SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT 25 LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 26 DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 27 THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 28 (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE 29 OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 30 31Compiling and Running Sample Applications 32========================================= 33 34The chapter describes how to compile and run applications in an Intel® DPDK environment. 35It also provides a pointer to where sample applications are stored. 36 37.. note:: 38 39 Parts of this process can also be done using the setup script described in **Chapter 6** of this document. 40 41Compiling a Sample Application 42------------------------------ 43 44Once an Intel® DPDK target environment directory has been created (such as x86_64-native-linuxapp-gcc), 45it contains all libraries and header files required to build an application. 46 47When compiling an application in the Linux* environment on the Intel® DPDK, the following variables must be exported: 48 49* RTE_SDK - Points to the Intel® DPDK installation directory. 50 51* RTE_TARGET - Points to the Intel® DPDK target environment directory. 52 53The following is an example of creating the helloworld application, which runs in the Intel® DPDK Linux environment. 54This example may be found in the ${RTE_SDK}/examples directory. 55 56The directory contains the main.c file. This file, when combined with the libraries in the Intel® DPDK target environment, 57calls the various functions to initialize the Intel® DPDK environment, 58then launches an entry point (dispatch application) for each core to be utilized. 59By default, the binary is generated in the build directory. 60 61.. code-block:: console 62 63 user@host:~/DPDK$ cd examples/helloworld/ 64 user@host:~/DPDK/examples/helloworld$ export RTE_SDK=$HOME/DPDK 65 user@host:~/DPDK/examples/helloworld$ export RTE_TARGET=x86_64-native-linuxapp-gcc 66 user@host:~/DPDK/examples/helloworld$ make 67 CC main.o 68 LD helloworld 69 INSTALL-APP helloworld 70 INSTALL-MAP helloworld.map 71 72 user@host:~/DPDK/examples/helloworld$ ls build/app 73 helloworld helloworld.map 74 75.. note:: 76 77 In the above example, helloworld was in the directory structure of the Intel® DPDK. 78 However, it could have been located outside the directory structure to keep the Intel® DPDK structure intact. 79 In the following case, the helloworld application is copied to a new directory as a new starting point. 80 81 .. code-block:: console 82 83 user@host:~$ export RTE_SDK=/home/user/DPDK 84 user@host:~$ cp -r $(RTE_SDK)/examples/helloworld my_rte_app 85 user@host:~$ cd my_rte_app/ 86 user@host:~$ export RTE_TARGET=x86_64-native-linuxapp-gcc 87 user@host:~/my_rte_app$ make 88 CC main.o 89 LD helloworld 90 INSTALL-APP helloworld 91 INSTALL-MAP helloworld.map 92 93Running a Sample Application 94---------------------------- 95 96.. warning:: 97 98 The UIO drivers and hugepages must be setup prior to running an application. 99 100.. warning:: 101 102 Any ports to be used by the application must be already bound to the igb_uio module, as described in Section 3.5, prior to running the application. 103 104The application is linked with the Intel® DPDK target environment's Environmental Abstraction Layer (EAL) library, 105which provides some options that are generic to every Intel® DPDK application. 106 107The following is the list of options that can be given to the EAL: 108 109.. code-block:: console 110 111 ./rte-app -c COREMASK -n NUM [-b <domain:bus:devid.func>] [--socket-mem=MB,...] [-m MB] [-r NUM] [-v] [--file-prefix] [--proc-type <primary|secondary|auto>] [-- xen-dom0] 112 113The EAL options are as follows: 114 115* -c COREMASK: An hexadecimal bit mask of the cores to run on. Note that core numbering can change between platforms and should be determined beforehand. 116 117* -n NUM: Number of memory channels per processor socket 118 119* -b <domain:bus:devid.func>: blacklisting of ports; prevent EAL from using specified PCI device (multiple -b options are allowed) 120 121* --use-device: use the specified ethernet device(s) only. Use comma-separate <[domain:]bus:devid.func> values. Cannot be used with -b option 122 123* --socket-mem: Memory to allocate from hugepages on specific sockets 124 125* -m MB: Memory to allocate from hugepages, regardless of processor socket. It is recommended that --socket-mem be used instead of this option. 126 127* -r NUM: Number of memory ranks 128 129* -v: Display version information on startup 130 131* --huge-dir: The directory where hugetlbfs is mounted 132 133* --file-prefix: The prefix text used for hugepage filenames 134 135* --proc-type: The type of process instance 136 137* --xen-dom0: Support application running on Xen Domain0 without hugetlbfs 138 139* --vmware-tsc-map: use VMware TSC map instead of native RDTSC 140 141* --base-virtaddr: specify base virtual address 142 143* --vfio-intr: specify interrupt type to be used by VFIO (has no effect if VFIO is not used) 144 145The -c and the -n options are mandatory; the others are optional. 146 147Copy the Intel® DPDK application binary to your target, then run the application as follows 148(assuming the platform has four memory channels per processor socket, 149and that cores 0-3 are present and are to be used for running the application): 150 151.. code-block:: console 152 153 user@target:~$ ./helloworld -c f -n 4 154 155.. note:: 156 157 The --proc-type and --file-prefix EAL options are used for running multiple Intel® DPDK processes. 158 See the “Multi-process Sample Application” chapter in the *Intel® DPDK Sample Applications User Guide* and 159 the *Intel® DPDK Programmers Guide* for more details. 160 161Logical Core Use by Applications 162~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 163 164The coremask parameter is always mandatory for Intel® DPDK applications. 165Each bit of the mask corresponds to the equivalent logical core number as reported by Linux. 166Since these logical core numbers, and their mapping to specific cores on specific NUMA sockets, can vary from platform to platform, 167it is recommended that the core layout for each platform be considered when choosing the coremask to use in each case. 168 169On initialization of the EAL layer by an Intel® DPDK application, the logical cores to be used and their socket location are displayed. 170This information can also be determined for all cores on the system by examining the /proc/cpuinfo file, for example, by running cat /proc/cpuinfo. 171The physical id attribute listed for each processor indicates the CPU socket to which it belongs. 172This can be useful when using other processors to understand the mapping of the logical cores to the sockets. 173 174.. note:: 175 176 A more graphical view of the logical core layout may be obtained using the lstopo Linux utility. 177 On Fedora* 18, this may be installed and run using the following command: 178 179.. code-block:: console 180 181 sudo yum install hwloc 182 ./lstopo 183 184.. warning:: 185 186 The logical core layout can change between different board layouts and should be checked before selecting an application coremask. 187 188Hugepage Memory Use by Applications 189~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ 190 191When running an application, it is recommended to use the same amount of memory as that allocated for hugepages. 192This is done automatically by the Intel® DPDK application at startup, 193if no -m or --socket-mem parameter is passed to it when run. 194 195If more memory is requested by explicitly passing a -m or --socket-mem value, the application fails. 196However, the application itself can also fail if the user requests less memory than the reserved amount of hugepage-memory, particularly if using the -m option. 197The reason is as follows. 198Suppose the system has 1024 reserved 2 MB pages in socket 0 and 1024 in socket 1. 199If the user requests 128 MB of memory, the 64 pages may not match the constraints: 200 201* The hugepage memory by be given to the application by the kernel in socket 1 only. 202 In this case, if the application attempts to create an object, such as a ring or memory pool in socket 0, it fails. 203 To avoid this issue, it is recommended that the -- socket-mem option be used instead of the -m option. 204 205* These pages can be located anywhere in physical memory, and, although the Intel® DPDK EAL will attempt to allocate memory in contiguous blocks, 206 it is possible that the pages will not be contiguous. In this case, the application is not able to allocate big memory pools. 207 208The socket-mem option can be used to request specific amounts of memory for specific sockets. 209This is accomplished by supplying the --socket-mem flag followed by amounts of memory requested on each socket, 210for example, supply --socket-mem=0,512 to try and reserve 512 MB for socket 1 only. 211Similarly, on a four socket system, to allocate 1 GB memory on each of sockets 0 and 2 only, the parameter --socket-mem=1024,0,1024 can be used. 212No memory will be reserved on any CPU socket that is not explicitly referenced, for example, socket 3 in this case. 213If the Intel® DPDK cannot allocate enough memory on each socket, the EAL initialization fails. 214 215Additional Sample Applications 216------------------------------ 217 218Additional sample applications are included in the ${RTE_SDK}/examples directory. 219These sample applications may be built and run in a manner similar to that described in earlier sections in this manual. 220In addition, see the *Intel® DPDK Sample Applications User Guide* for a description of the application, 221specific instructions on compilation and execution and some explanation of the code. 222 223Additional Test Applications 224---------------------------- 225 226In addition, there are two other applications that are built when the libraries are created. 227The source files for these are in the DPDK/app directory and are called test and testpmd. 228Once the libraries are created, they can be found in the build/app directory. 229 230* The test application provides a variety of specific tests for the various functions in the Intel® DPDK. 231 232* The testpmd application provides a number of different packet throughput tests and 233 examples of features such as how to use the Flow Director found in the Intel® 82599 10 Gigabit Ethernet Controller. 234