1.. SPDX-License-Identifier: BSD-3-Clause 2 Copyright(c) 2016-2019 Intel Corporation. 3 4KASUMI Crypto Poll Mode Driver 5=============================== 6 7The KASUMI PMD (**librte_crypto_kasumi**) provides poll mode crypto driver support for 8utilizing `Intel IPSec Multi-buffer library <https://github.com/01org/intel-ipsec-mb>`_ 9which implements F8 and F9 functions for KASUMI UEA1 cipher and UIA1 hash algorithms. 10 11Features 12-------- 13 14KASUMI PMD has support for: 15 16Cipher algorithm: 17 18* RTE_CRYPTO_CIPHER_KASUMI_F8 19 20Authentication algorithm: 21 22* RTE_CRYPTO_AUTH_KASUMI_F9 23 24Limitations 25----------- 26 27* Chained mbufs are not supported. 28* KASUMI(F9) supported only if hash offset and length field is byte-aligned. 29* In-place bit-level operations for KASUMI(F8) are not supported 30 (if length and/or offset of data to be ciphered is not byte-aligned). 31 32 33Installation 34------------ 35 36To build DPDK with the KASUMI_PMD the user is required to download the multi-buffer 37library from `here <https://github.com/01org/intel-ipsec-mb>`_ 38and compile it on their user system before building DPDK. 39The latest version of the library supported by this PMD is v1.0, which 40can be downloaded from `<https://github.com/01org/intel-ipsec-mb/archive/v1.0.zip>`_. 41 42After downloading the library, the user needs to unpack and compile it 43on their system before building DPDK: 44 45.. code-block:: console 46 47 make 48 make install 49 50The library requires NASM to be built. Depending on the library version, it might 51require a minimum NASM version (e.g. v0.54 requires at least NASM 2.14). 52 53NASM is packaged for different OS. However, on some OS the version is too old, 54so a manual installation is required. In that case, NASM can be downloaded from 55`NASM website <https://www.nasm.us/pub/nasm/releasebuilds/?C=M;O=D>`_. 56Once it is downloaded, extract it and follow these steps: 57 58.. code-block:: console 59 60 ./configure 61 make 62 make install 63 64.. note:: 65 66 Compilation of the Multi-Buffer library is broken when GCC < 5.0, if library <= v0.53. 67 If a lower GCC version than 5.0, the workaround proposed by the following link 68 should be used: `<https://github.com/intel/intel-ipsec-mb/issues/40>`_. 69 70As a reference, the following table shows a mapping between the past DPDK versions 71and the external crypto libraries supported by them: 72 73.. _table_kasumi_versions: 74 75.. table:: DPDK and external crypto library version compatibility 76 77 ============= ================================ 78 DPDK version Crypto library version 79 ============= ================================ 80 16.11 - 19.11 LibSSO KASUMI 81 20.02 - 21.08 Multi-buffer library 0.53 - 1.0* 82 21.11+ Multi-buffer library 1.0* 83 ============= ================================ 84 85\* Multi-buffer library 1.0 or newer only works for Meson but not Make build system. 86 87Initialization 88-------------- 89 90In order to enable this virtual crypto PMD, user must: 91 92* Build the multi buffer library (explained in Installation section). 93 94To use the PMD in an application, user must: 95 96* Call rte_vdev_init("crypto_kasumi") within the application. 97 98* Use --vdev="crypto_kasumi" in the EAL options, which will call rte_vdev_init() internally. 99 100The following parameters (all optional) can be provided in the previous two calls: 101 102* socket_id: Specify the socket where the memory for the device is going to be allocated 103 (by default, socket_id will be the socket where the core that is creating the PMD is running on). 104 105* max_nb_queue_pairs: Specify the maximum number of queue pairs in the device (8 by default). 106 107* max_nb_sessions: Specify the maximum number of sessions that can be created (2048 by default). 108 109Example: 110 111.. code-block:: console 112 113 ./dpdk-l2fwd-crypto -l 1 -n 4 --vdev="crypto_kasumi,socket_id=0,max_nb_sessions=128" \ 114 -- -p 1 --cdev SW --chain CIPHER_ONLY --cipher_algo "kasumi-f8" 115 116Extra notes on KASUMI F9 117------------------------ 118 119When using KASUMI F9 authentication algorithm, the input buffer must be 120constructed according to the 3GPP KASUMI specifications (section 4.4, page 13): 121`<http://cryptome.org/3gpp/35201-900.pdf>`_. 122Input buffer has to have COUNT (4 bytes), FRESH (4 bytes), MESSAGE and DIRECTION (1 bit) 123concatenated. After the DIRECTION bit, a single '1' bit is appended, followed by 124between 0 and 7 '0' bits, so that the total length of the buffer is multiple of 8 bits. 125Note that the actual message can be any length, specified in bits. 126 127Once this buffer is passed this way, when creating the crypto operation, 128length of data to authenticate (op.sym.auth.data.length) must be the length 129of all the items described above, including the padding at the end. 130Also, offset of data to authenticate (op.sym.auth.data.offset) 131must be such that points at the start of the COUNT bytes. 132