xref: /dpdk/app/test-pmd/testpmd.c (revision f2b24fb03e8fcd21d10d5144ce257d0fe221adbc)
1 /*-
2  *   BSD LICENSE
3  *
4  *   Copyright(c) 2010-2017 Intel Corporation. All rights reserved.
5  *   All rights reserved.
6  *
7  *   Redistribution and use in source and binary forms, with or without
8  *   modification, are permitted provided that the following conditions
9  *   are met:
10  *
11  *     * Redistributions of source code must retain the above copyright
12  *       notice, this list of conditions and the following disclaimer.
13  *     * Redistributions in binary form must reproduce the above copyright
14  *       notice, this list of conditions and the following disclaimer in
15  *       the documentation and/or other materials provided with the
16  *       distribution.
17  *     * Neither the name of Intel Corporation nor the names of its
18  *       contributors may be used to endorse or promote products derived
19  *       from this software without specific prior written permission.
20  *
21  *   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
22  *   "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
23  *   LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
24  *   A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
25  *   OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
26  *   SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
27  *   LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
28  *   DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
29  *   THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
30  *   (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
31  *   OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
32  */
33 
34 #include <stdarg.h>
35 #include <stdio.h>
36 #include <stdlib.h>
37 #include <signal.h>
38 #include <string.h>
39 #include <time.h>
40 #include <fcntl.h>
41 #include <sys/types.h>
42 #include <errno.h>
43 
44 #include <sys/queue.h>
45 #include <sys/stat.h>
46 
47 #include <stdint.h>
48 #include <unistd.h>
49 #include <inttypes.h>
50 
51 #include <rte_common.h>
52 #include <rte_errno.h>
53 #include <rte_byteorder.h>
54 #include <rte_log.h>
55 #include <rte_debug.h>
56 #include <rte_cycles.h>
57 #include <rte_memory.h>
58 #include <rte_memcpy.h>
59 #include <rte_memzone.h>
60 #include <rte_launch.h>
61 #include <rte_eal.h>
62 #include <rte_alarm.h>
63 #include <rte_per_lcore.h>
64 #include <rte_lcore.h>
65 #include <rte_atomic.h>
66 #include <rte_branch_prediction.h>
67 #include <rte_mempool.h>
68 #include <rte_malloc.h>
69 #include <rte_mbuf.h>
70 #include <rte_interrupts.h>
71 #include <rte_pci.h>
72 #include <rte_ether.h>
73 #include <rte_ethdev.h>
74 #include <rte_dev.h>
75 #include <rte_string_fns.h>
76 #ifdef RTE_LIBRTE_IXGBE_PMD
77 #include <rte_pmd_ixgbe.h>
78 #endif
79 #ifdef RTE_LIBRTE_PMD_XENVIRT
80 #include <rte_eth_xenvirt.h>
81 #endif
82 #ifdef RTE_LIBRTE_PDUMP
83 #include <rte_pdump.h>
84 #endif
85 #include <rte_flow.h>
86 #include <rte_metrics.h>
87 #ifdef RTE_LIBRTE_BITRATE
88 #include <rte_bitrate.h>
89 #endif
90 #ifdef RTE_LIBRTE_LATENCY_STATS
91 #include <rte_latencystats.h>
92 #endif
93 #include <rte_gro.h>
94 
95 #include "testpmd.h"
96 
97 uint16_t verbose_level = 0; /**< Silent by default. */
98 
99 /* use master core for command line ? */
100 uint8_t interactive = 0;
101 uint8_t auto_start = 0;
102 uint8_t tx_first;
103 char cmdline_filename[PATH_MAX] = {0};
104 
105 /*
106  * NUMA support configuration.
107  * When set, the NUMA support attempts to dispatch the allocation of the
108  * RX and TX memory rings, and of the DMA memory buffers (mbufs) for the
109  * probed ports among the CPU sockets 0 and 1.
110  * Otherwise, all memory is allocated from CPU socket 0.
111  */
112 uint8_t numa_support = 1; /**< numa enabled by default */
113 
114 /*
115  * In UMA mode,all memory is allocated from socket 0 if --socket-num is
116  * not configured.
117  */
118 uint8_t socket_num = UMA_NO_CONFIG;
119 
120 /*
121  * Use ANONYMOUS mapped memory (might be not physically continuous) for mbufs.
122  */
123 uint8_t mp_anon = 0;
124 
125 /*
126  * Record the Ethernet address of peer target ports to which packets are
127  * forwarded.
128  * Must be instantiated with the ethernet addresses of peer traffic generator
129  * ports.
130  */
131 struct ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS];
132 portid_t nb_peer_eth_addrs = 0;
133 
134 /*
135  * Probed Target Environment.
136  */
137 struct rte_port *ports;	       /**< For all probed ethernet ports. */
138 portid_t nb_ports;             /**< Number of probed ethernet ports. */
139 struct fwd_lcore **fwd_lcores; /**< For all probed logical cores. */
140 lcoreid_t nb_lcores;           /**< Number of probed logical cores. */
141 
142 /*
143  * Test Forwarding Configuration.
144  *    nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores
145  *    nb_fwd_ports  <= nb_cfg_ports  <= nb_ports
146  */
147 lcoreid_t nb_cfg_lcores; /**< Number of configured logical cores. */
148 lcoreid_t nb_fwd_lcores; /**< Number of forwarding logical cores. */
149 portid_t  nb_cfg_ports;  /**< Number of configured ports. */
150 portid_t  nb_fwd_ports;  /**< Number of forwarding ports. */
151 
152 unsigned int fwd_lcores_cpuids[RTE_MAX_LCORE]; /**< CPU ids configuration. */
153 portid_t fwd_ports_ids[RTE_MAX_ETHPORTS];      /**< Port ids configuration. */
154 
155 struct fwd_stream **fwd_streams; /**< For each RX queue of each port. */
156 streamid_t nb_fwd_streams;       /**< Is equal to (nb_ports * nb_rxq). */
157 
158 /*
159  * Forwarding engines.
160  */
161 struct fwd_engine * fwd_engines[] = {
162 	&io_fwd_engine,
163 	&mac_fwd_engine,
164 	&mac_swap_engine,
165 	&flow_gen_engine,
166 	&rx_only_engine,
167 	&tx_only_engine,
168 	&csum_fwd_engine,
169 	&icmp_echo_engine,
170 #ifdef RTE_LIBRTE_IEEE1588
171 	&ieee1588_fwd_engine,
172 #endif
173 	NULL,
174 };
175 
176 struct fwd_config cur_fwd_config;
177 struct fwd_engine *cur_fwd_eng = &io_fwd_engine; /**< IO mode by default. */
178 uint32_t retry_enabled;
179 uint32_t burst_tx_delay_time = BURST_TX_WAIT_US;
180 uint32_t burst_tx_retry_num = BURST_TX_RETRIES;
181 
182 uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */
183 uint32_t param_total_num_mbufs = 0;  /**< number of mbufs in all pools - if
184                                       * specified on command-line. */
185 uint16_t stats_period; /**< Period to show statistics (disabled by default) */
186 /*
187  * Configuration of packet segments used by the "txonly" processing engine.
188  */
189 uint16_t tx_pkt_length = TXONLY_DEF_PACKET_LEN; /**< TXONLY packet length. */
190 uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT] = {
191 	TXONLY_DEF_PACKET_LEN,
192 };
193 uint8_t  tx_pkt_nb_segs = 1; /**< Number of segments in TXONLY packets */
194 
195 enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF;
196 /**< Split policy for packets to TX. */
197 
198 uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */
199 uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */
200 
201 /* current configuration is in DCB or not,0 means it is not in DCB mode */
202 uint8_t dcb_config = 0;
203 
204 /* Whether the dcb is in testing status */
205 uint8_t dcb_test = 0;
206 
207 /*
208  * Configurable number of RX/TX queues.
209  */
210 queueid_t nb_rxq = 1; /**< Number of RX queues per port. */
211 queueid_t nb_txq = 1; /**< Number of TX queues per port. */
212 
213 /*
214  * Configurable number of RX/TX ring descriptors.
215  */
216 #define RTE_TEST_RX_DESC_DEFAULT 128
217 #define RTE_TEST_TX_DESC_DEFAULT 512
218 uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */
219 uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */
220 
221 #define RTE_PMD_PARAM_UNSET -1
222 /*
223  * Configurable values of RX and TX ring threshold registers.
224  */
225 
226 int8_t rx_pthresh = RTE_PMD_PARAM_UNSET;
227 int8_t rx_hthresh = RTE_PMD_PARAM_UNSET;
228 int8_t rx_wthresh = RTE_PMD_PARAM_UNSET;
229 
230 int8_t tx_pthresh = RTE_PMD_PARAM_UNSET;
231 int8_t tx_hthresh = RTE_PMD_PARAM_UNSET;
232 int8_t tx_wthresh = RTE_PMD_PARAM_UNSET;
233 
234 /*
235  * Configurable value of RX free threshold.
236  */
237 int16_t rx_free_thresh = RTE_PMD_PARAM_UNSET;
238 
239 /*
240  * Configurable value of RX drop enable.
241  */
242 int8_t rx_drop_en = RTE_PMD_PARAM_UNSET;
243 
244 /*
245  * Configurable value of TX free threshold.
246  */
247 int16_t tx_free_thresh = RTE_PMD_PARAM_UNSET;
248 
249 /*
250  * Configurable value of TX RS bit threshold.
251  */
252 int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET;
253 
254 /*
255  * Configurable value of TX queue flags.
256  */
257 int32_t txq_flags = RTE_PMD_PARAM_UNSET;
258 
259 /*
260  * Receive Side Scaling (RSS) configuration.
261  */
262 uint64_t rss_hf = ETH_RSS_IP; /* RSS IP by default. */
263 
264 /*
265  * Port topology configuration
266  */
267 uint16_t port_topology = PORT_TOPOLOGY_PAIRED; /* Ports are paired by default */
268 
269 /*
270  * Avoids to flush all the RX streams before starts forwarding.
271  */
272 uint8_t no_flush_rx = 0; /* flush by default */
273 
274 /*
275  * Flow API isolated mode.
276  */
277 uint8_t flow_isolate_all;
278 
279 /*
280  * Avoids to check link status when starting/stopping a port.
281  */
282 uint8_t no_link_check = 0; /* check by default */
283 
284 /*
285  * Enable link status change notification
286  */
287 uint8_t lsc_interrupt = 1; /* enabled by default */
288 
289 /*
290  * Enable device removal notification.
291  */
292 uint8_t rmv_interrupt = 1; /* enabled by default */
293 
294 /*
295  * Display or mask ether events
296  * Default to all events except VF_MBOX
297  */
298 uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) |
299 			    (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) |
300 			    (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) |
301 			    (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) |
302 			    (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) |
303 			    (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV);
304 
305 /*
306  * NIC bypass mode configuration options.
307  */
308 
309 #if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
310 /* The NIC bypass watchdog timeout. */
311 uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF;
312 #endif
313 
314 
315 #ifdef RTE_LIBRTE_LATENCY_STATS
316 
317 /*
318  * Set when latency stats is enabled in the commandline
319  */
320 uint8_t latencystats_enabled;
321 
322 /*
323  * Lcore ID to serive latency statistics.
324  */
325 lcoreid_t latencystats_lcore_id = -1;
326 
327 #endif
328 
329 /*
330  * Ethernet device configuration.
331  */
332 struct rte_eth_rxmode rx_mode = {
333 	.max_rx_pkt_len = ETHER_MAX_LEN, /**< Default maximum frame length. */
334 	.split_hdr_size = 0,
335 	.header_split   = 0, /**< Header Split disabled. */
336 	.hw_ip_checksum = 0, /**< IP checksum offload disabled. */
337 	.hw_vlan_filter = 1, /**< VLAN filtering enabled. */
338 	.hw_vlan_strip  = 1, /**< VLAN strip enabled. */
339 	.hw_vlan_extend = 0, /**< Extended VLAN disabled. */
340 	.jumbo_frame    = 0, /**< Jumbo Frame Support disabled. */
341 	.hw_strip_crc   = 1, /**< CRC stripping by hardware enabled. */
342 };
343 
344 struct rte_fdir_conf fdir_conf = {
345 	.mode = RTE_FDIR_MODE_NONE,
346 	.pballoc = RTE_FDIR_PBALLOC_64K,
347 	.status = RTE_FDIR_REPORT_STATUS,
348 	.mask = {
349 		.vlan_tci_mask = 0x0,
350 		.ipv4_mask     = {
351 			.src_ip = 0xFFFFFFFF,
352 			.dst_ip = 0xFFFFFFFF,
353 		},
354 		.ipv6_mask     = {
355 			.src_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
356 			.dst_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF},
357 		},
358 		.src_port_mask = 0xFFFF,
359 		.dst_port_mask = 0xFFFF,
360 		.mac_addr_byte_mask = 0xFF,
361 		.tunnel_type_mask = 1,
362 		.tunnel_id_mask = 0xFFFFFFFF,
363 	},
364 	.drop_queue = 127,
365 };
366 
367 volatile int test_done = 1; /* stop packet forwarding when set to 1. */
368 
369 struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS];
370 struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS];
371 
372 struct queue_stats_mappings *tx_queue_stats_mappings = tx_queue_stats_mappings_array;
373 struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_array;
374 
375 uint16_t nb_tx_queue_stats_mappings = 0;
376 uint16_t nb_rx_queue_stats_mappings = 0;
377 
378 unsigned int num_sockets = 0;
379 unsigned int socket_ids[RTE_MAX_NUMA_NODES];
380 
381 #ifdef RTE_LIBRTE_BITRATE
382 /* Bitrate statistics */
383 struct rte_stats_bitrates *bitrate_data;
384 lcoreid_t bitrate_lcore_id;
385 uint8_t bitrate_enabled;
386 #endif
387 
388 struct gro_status gro_ports[RTE_MAX_ETHPORTS];
389 
390 /* Forward function declarations */
391 static void map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port);
392 static void check_all_ports_link_status(uint32_t port_mask);
393 static int eth_event_callback(uint8_t port_id,
394 			      enum rte_eth_event_type type,
395 			      void *param, void *ret_param);
396 
397 /*
398  * Check if all the ports are started.
399  * If yes, return positive value. If not, return zero.
400  */
401 static int all_ports_started(void);
402 
403 /*
404  * Helper function to check if socket is already discovered.
405  * If yes, return positive value. If not, return zero.
406  */
407 int
408 new_socket_id(unsigned int socket_id)
409 {
410 	unsigned int i;
411 
412 	for (i = 0; i < num_sockets; i++) {
413 		if (socket_ids[i] == socket_id)
414 			return 0;
415 	}
416 	return 1;
417 }
418 
419 /*
420  * Setup default configuration.
421  */
422 static void
423 set_default_fwd_lcores_config(void)
424 {
425 	unsigned int i;
426 	unsigned int nb_lc;
427 	unsigned int sock_num;
428 
429 	nb_lc = 0;
430 	for (i = 0; i < RTE_MAX_LCORE; i++) {
431 		sock_num = rte_lcore_to_socket_id(i);
432 		if (new_socket_id(sock_num)) {
433 			if (num_sockets >= RTE_MAX_NUMA_NODES) {
434 				rte_exit(EXIT_FAILURE,
435 					 "Total sockets greater than %u\n",
436 					 RTE_MAX_NUMA_NODES);
437 			}
438 			socket_ids[num_sockets++] = sock_num;
439 		}
440 		if (!rte_lcore_is_enabled(i))
441 			continue;
442 		if (i == rte_get_master_lcore())
443 			continue;
444 		fwd_lcores_cpuids[nb_lc++] = i;
445 	}
446 	nb_lcores = (lcoreid_t) nb_lc;
447 	nb_cfg_lcores = nb_lcores;
448 	nb_fwd_lcores = 1;
449 }
450 
451 static void
452 set_def_peer_eth_addrs(void)
453 {
454 	portid_t i;
455 
456 	for (i = 0; i < RTE_MAX_ETHPORTS; i++) {
457 		peer_eth_addrs[i].addr_bytes[0] = ETHER_LOCAL_ADMIN_ADDR;
458 		peer_eth_addrs[i].addr_bytes[5] = i;
459 	}
460 }
461 
462 static void
463 set_default_fwd_ports_config(void)
464 {
465 	portid_t pt_id;
466 
467 	for (pt_id = 0; pt_id < nb_ports; pt_id++)
468 		fwd_ports_ids[pt_id] = pt_id;
469 
470 	nb_cfg_ports = nb_ports;
471 	nb_fwd_ports = nb_ports;
472 }
473 
474 void
475 set_def_fwd_config(void)
476 {
477 	set_default_fwd_lcores_config();
478 	set_def_peer_eth_addrs();
479 	set_default_fwd_ports_config();
480 }
481 
482 /*
483  * Configuration initialisation done once at init time.
484  */
485 static void
486 mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf,
487 		 unsigned int socket_id)
488 {
489 	char pool_name[RTE_MEMPOOL_NAMESIZE];
490 	struct rte_mempool *rte_mp = NULL;
491 	uint32_t mb_size;
492 
493 	mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size;
494 	mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name));
495 
496 	RTE_LOG(INFO, USER1,
497 		"create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n",
498 		pool_name, nb_mbuf, mbuf_seg_size, socket_id);
499 
500 #ifdef RTE_LIBRTE_PMD_XENVIRT
501 	rte_mp = rte_mempool_gntalloc_create(pool_name, nb_mbuf, mb_size,
502 		(unsigned) mb_mempool_cache,
503 		sizeof(struct rte_pktmbuf_pool_private),
504 		rte_pktmbuf_pool_init, NULL,
505 		rte_pktmbuf_init, NULL,
506 		socket_id, 0);
507 #endif
508 
509 	/* if the former XEN allocation failed fall back to normal allocation */
510 	if (rte_mp == NULL) {
511 		if (mp_anon != 0) {
512 			rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf,
513 				mb_size, (unsigned) mb_mempool_cache,
514 				sizeof(struct rte_pktmbuf_pool_private),
515 				socket_id, 0);
516 			if (rte_mp == NULL)
517 				goto err;
518 
519 			if (rte_mempool_populate_anon(rte_mp) == 0) {
520 				rte_mempool_free(rte_mp);
521 				rte_mp = NULL;
522 				goto err;
523 			}
524 			rte_pktmbuf_pool_init(rte_mp, NULL);
525 			rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL);
526 		} else {
527 			/* wrapper to rte_mempool_create() */
528 			rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf,
529 				mb_mempool_cache, 0, mbuf_seg_size, socket_id);
530 		}
531 	}
532 
533 err:
534 	if (rte_mp == NULL) {
535 		rte_exit(EXIT_FAILURE,
536 			"Creation of mbuf pool for socket %u failed: %s\n",
537 			socket_id, rte_strerror(rte_errno));
538 	} else if (verbose_level > 0) {
539 		rte_mempool_dump(stdout, rte_mp);
540 	}
541 }
542 
543 /*
544  * Check given socket id is valid or not with NUMA mode,
545  * if valid, return 0, else return -1
546  */
547 static int
548 check_socket_id(const unsigned int socket_id)
549 {
550 	static int warning_once = 0;
551 
552 	if (new_socket_id(socket_id)) {
553 		if (!warning_once && numa_support)
554 			printf("Warning: NUMA should be configured manually by"
555 			       " using --port-numa-config and"
556 			       " --ring-numa-config parameters along with"
557 			       " --numa.\n");
558 		warning_once = 1;
559 		return -1;
560 	}
561 	return 0;
562 }
563 
564 static void
565 init_config(void)
566 {
567 	portid_t pid;
568 	struct rte_port *port;
569 	struct rte_mempool *mbp;
570 	unsigned int nb_mbuf_per_pool;
571 	lcoreid_t  lc_id;
572 	uint8_t port_per_socket[RTE_MAX_NUMA_NODES];
573 
574 	memset(port_per_socket,0,RTE_MAX_NUMA_NODES);
575 
576 	if (numa_support) {
577 		memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
578 		memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
579 		memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS);
580 	}
581 
582 	/* Configuration of logical cores. */
583 	fwd_lcores = rte_zmalloc("testpmd: fwd_lcores",
584 				sizeof(struct fwd_lcore *) * nb_lcores,
585 				RTE_CACHE_LINE_SIZE);
586 	if (fwd_lcores == NULL) {
587 		rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_lcore *)) "
588 							"failed\n", nb_lcores);
589 	}
590 	for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
591 		fwd_lcores[lc_id] = rte_zmalloc("testpmd: struct fwd_lcore",
592 					       sizeof(struct fwd_lcore),
593 					       RTE_CACHE_LINE_SIZE);
594 		if (fwd_lcores[lc_id] == NULL) {
595 			rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_lcore) "
596 								"failed\n");
597 		}
598 		fwd_lcores[lc_id]->cpuid_idx = lc_id;
599 	}
600 
601 	RTE_ETH_FOREACH_DEV(pid) {
602 		port = &ports[pid];
603 		rte_eth_dev_info_get(pid, &port->dev_info);
604 
605 		if (numa_support) {
606 			if (port_numa[pid] != NUMA_NO_CONFIG)
607 				port_per_socket[port_numa[pid]]++;
608 			else {
609 				uint32_t socket_id = rte_eth_dev_socket_id(pid);
610 
611 				/* if socket_id is invalid, set to 0 */
612 				if (check_socket_id(socket_id) < 0)
613 					socket_id = 0;
614 				port_per_socket[socket_id]++;
615 			}
616 		}
617 
618 		/* set flag to initialize port/queue */
619 		port->need_reconfig = 1;
620 		port->need_reconfig_queues = 1;
621 	}
622 
623 	/*
624 	 * Create pools of mbuf.
625 	 * If NUMA support is disabled, create a single pool of mbuf in
626 	 * socket 0 memory by default.
627 	 * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1.
628 	 *
629 	 * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and
630 	 * nb_txd can be configured at run time.
631 	 */
632 	if (param_total_num_mbufs)
633 		nb_mbuf_per_pool = param_total_num_mbufs;
634 	else {
635 		nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX +
636 			(nb_lcores * mb_mempool_cache) +
637 			RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST;
638 		nb_mbuf_per_pool *= RTE_MAX_ETHPORTS;
639 	}
640 
641 	if (numa_support) {
642 		uint8_t i;
643 
644 		for (i = 0; i < num_sockets; i++)
645 			mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
646 					 socket_ids[i]);
647 	} else {
648 		if (socket_num == UMA_NO_CONFIG)
649 			mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool, 0);
650 		else
651 			mbuf_pool_create(mbuf_data_size, nb_mbuf_per_pool,
652 						 socket_num);
653 	}
654 
655 	init_port_config();
656 
657 	/*
658 	 * Records which Mbuf pool to use by each logical core, if needed.
659 	 */
660 	for (lc_id = 0; lc_id < nb_lcores; lc_id++) {
661 		mbp = mbuf_pool_find(
662 			rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id]));
663 
664 		if (mbp == NULL)
665 			mbp = mbuf_pool_find(0);
666 		fwd_lcores[lc_id]->mbp = mbp;
667 	}
668 
669 	/* Configuration of packet forwarding streams. */
670 	if (init_fwd_streams() < 0)
671 		rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n");
672 
673 	fwd_config_setup();
674 }
675 
676 
677 void
678 reconfig(portid_t new_port_id, unsigned socket_id)
679 {
680 	struct rte_port *port;
681 
682 	/* Reconfiguration of Ethernet ports. */
683 	port = &ports[new_port_id];
684 	rte_eth_dev_info_get(new_port_id, &port->dev_info);
685 
686 	/* set flag to initialize port/queue */
687 	port->need_reconfig = 1;
688 	port->need_reconfig_queues = 1;
689 	port->socket_id = socket_id;
690 
691 	init_port_config();
692 }
693 
694 
695 int
696 init_fwd_streams(void)
697 {
698 	portid_t pid;
699 	struct rte_port *port;
700 	streamid_t sm_id, nb_fwd_streams_new;
701 	queueid_t q;
702 
703 	/* set socket id according to numa or not */
704 	RTE_ETH_FOREACH_DEV(pid) {
705 		port = &ports[pid];
706 		if (nb_rxq > port->dev_info.max_rx_queues) {
707 			printf("Fail: nb_rxq(%d) is greater than "
708 				"max_rx_queues(%d)\n", nb_rxq,
709 				port->dev_info.max_rx_queues);
710 			return -1;
711 		}
712 		if (nb_txq > port->dev_info.max_tx_queues) {
713 			printf("Fail: nb_txq(%d) is greater than "
714 				"max_tx_queues(%d)\n", nb_txq,
715 				port->dev_info.max_tx_queues);
716 			return -1;
717 		}
718 		if (numa_support) {
719 			if (port_numa[pid] != NUMA_NO_CONFIG)
720 				port->socket_id = port_numa[pid];
721 			else {
722 				port->socket_id = rte_eth_dev_socket_id(pid);
723 
724 				/* if socket_id is invalid, set to 0 */
725 				if (check_socket_id(port->socket_id) < 0)
726 					port->socket_id = 0;
727 			}
728 		}
729 		else {
730 			if (socket_num == UMA_NO_CONFIG)
731 				port->socket_id = 0;
732 			else
733 				port->socket_id = socket_num;
734 		}
735 	}
736 
737 	q = RTE_MAX(nb_rxq, nb_txq);
738 	if (q == 0) {
739 		printf("Fail: Cannot allocate fwd streams as number of queues is 0\n");
740 		return -1;
741 	}
742 	nb_fwd_streams_new = (streamid_t)(nb_ports * q);
743 	if (nb_fwd_streams_new == nb_fwd_streams)
744 		return 0;
745 	/* clear the old */
746 	if (fwd_streams != NULL) {
747 		for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
748 			if (fwd_streams[sm_id] == NULL)
749 				continue;
750 			rte_free(fwd_streams[sm_id]);
751 			fwd_streams[sm_id] = NULL;
752 		}
753 		rte_free(fwd_streams);
754 		fwd_streams = NULL;
755 	}
756 
757 	/* init new */
758 	nb_fwd_streams = nb_fwd_streams_new;
759 	fwd_streams = rte_zmalloc("testpmd: fwd_streams",
760 		sizeof(struct fwd_stream *) * nb_fwd_streams, RTE_CACHE_LINE_SIZE);
761 	if (fwd_streams == NULL)
762 		rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_stream *)) "
763 						"failed\n", nb_fwd_streams);
764 
765 	for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) {
766 		fwd_streams[sm_id] = rte_zmalloc("testpmd: struct fwd_stream",
767 				sizeof(struct fwd_stream), RTE_CACHE_LINE_SIZE);
768 		if (fwd_streams[sm_id] == NULL)
769 			rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_stream)"
770 								" failed\n");
771 	}
772 
773 	return 0;
774 }
775 
776 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
777 static void
778 pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs)
779 {
780 	unsigned int total_burst;
781 	unsigned int nb_burst;
782 	unsigned int burst_stats[3];
783 	uint16_t pktnb_stats[3];
784 	uint16_t nb_pkt;
785 	int burst_percent[3];
786 
787 	/*
788 	 * First compute the total number of packet bursts and the
789 	 * two highest numbers of bursts of the same number of packets.
790 	 */
791 	total_burst = 0;
792 	burst_stats[0] = burst_stats[1] = burst_stats[2] = 0;
793 	pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0;
794 	for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) {
795 		nb_burst = pbs->pkt_burst_spread[nb_pkt];
796 		if (nb_burst == 0)
797 			continue;
798 		total_burst += nb_burst;
799 		if (nb_burst > burst_stats[0]) {
800 			burst_stats[1] = burst_stats[0];
801 			pktnb_stats[1] = pktnb_stats[0];
802 			burst_stats[0] = nb_burst;
803 			pktnb_stats[0] = nb_pkt;
804 		}
805 	}
806 	if (total_burst == 0)
807 		return;
808 	burst_percent[0] = (burst_stats[0] * 100) / total_burst;
809 	printf("  %s-bursts : %u [%d%% of %d pkts", rx_tx, total_burst,
810 	       burst_percent[0], (int) pktnb_stats[0]);
811 	if (burst_stats[0] == total_burst) {
812 		printf("]\n");
813 		return;
814 	}
815 	if (burst_stats[0] + burst_stats[1] == total_burst) {
816 		printf(" + %d%% of %d pkts]\n",
817 		       100 - burst_percent[0], pktnb_stats[1]);
818 		return;
819 	}
820 	burst_percent[1] = (burst_stats[1] * 100) / total_burst;
821 	burst_percent[2] = 100 - (burst_percent[0] + burst_percent[1]);
822 	if ((burst_percent[1] == 0) || (burst_percent[2] == 0)) {
823 		printf(" + %d%% of others]\n", 100 - burst_percent[0]);
824 		return;
825 	}
826 	printf(" + %d%% of %d pkts + %d%% of others]\n",
827 	       burst_percent[1], (int) pktnb_stats[1], burst_percent[2]);
828 }
829 #endif /* RTE_TEST_PMD_RECORD_BURST_STATS */
830 
831 static void
832 fwd_port_stats_display(portid_t port_id, struct rte_eth_stats *stats)
833 {
834 	struct rte_port *port;
835 	uint8_t i;
836 
837 	static const char *fwd_stats_border = "----------------------";
838 
839 	port = &ports[port_id];
840 	printf("\n  %s Forward statistics for port %-2d %s\n",
841 	       fwd_stats_border, port_id, fwd_stats_border);
842 
843 	if ((!port->rx_queue_stats_mapping_enabled) && (!port->tx_queue_stats_mapping_enabled)) {
844 		printf("  RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
845 		       "%-"PRIu64"\n",
846 		       stats->ipackets, stats->imissed,
847 		       (uint64_t) (stats->ipackets + stats->imissed));
848 
849 		if (cur_fwd_eng == &csum_fwd_engine)
850 			printf("  Bad-ipcsum: %-14"PRIu64" Bad-l4csum: %-14"PRIu64" \n",
851 			       port->rx_bad_ip_csum, port->rx_bad_l4_csum);
852 		if ((stats->ierrors + stats->rx_nombuf) > 0) {
853 			printf("  RX-error: %-"PRIu64"\n",  stats->ierrors);
854 			printf("  RX-nombufs: %-14"PRIu64"\n", stats->rx_nombuf);
855 		}
856 
857 		printf("  TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
858 		       "%-"PRIu64"\n",
859 		       stats->opackets, port->tx_dropped,
860 		       (uint64_t) (stats->opackets + port->tx_dropped));
861 	}
862 	else {
863 		printf("  RX-packets:             %14"PRIu64"    RX-dropped:%14"PRIu64"    RX-total:"
864 		       "%14"PRIu64"\n",
865 		       stats->ipackets, stats->imissed,
866 		       (uint64_t) (stats->ipackets + stats->imissed));
867 
868 		if (cur_fwd_eng == &csum_fwd_engine)
869 			printf("  Bad-ipcsum:%14"PRIu64"    Bad-l4csum:%14"PRIu64"\n",
870 			       port->rx_bad_ip_csum, port->rx_bad_l4_csum);
871 		if ((stats->ierrors + stats->rx_nombuf) > 0) {
872 			printf("  RX-error:%"PRIu64"\n", stats->ierrors);
873 			printf("  RX-nombufs:             %14"PRIu64"\n",
874 			       stats->rx_nombuf);
875 		}
876 
877 		printf("  TX-packets:             %14"PRIu64"    TX-dropped:%14"PRIu64"    TX-total:"
878 		       "%14"PRIu64"\n",
879 		       stats->opackets, port->tx_dropped,
880 		       (uint64_t) (stats->opackets + port->tx_dropped));
881 	}
882 
883 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
884 	if (port->rx_stream)
885 		pkt_burst_stats_display("RX",
886 			&port->rx_stream->rx_burst_stats);
887 	if (port->tx_stream)
888 		pkt_burst_stats_display("TX",
889 			&port->tx_stream->tx_burst_stats);
890 #endif
891 
892 	if (port->rx_queue_stats_mapping_enabled) {
893 		printf("\n");
894 		for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
895 			printf("  Stats reg %2d RX-packets:%14"PRIu64
896 			       "     RX-errors:%14"PRIu64
897 			       "    RX-bytes:%14"PRIu64"\n",
898 			       i, stats->q_ipackets[i], stats->q_errors[i], stats->q_ibytes[i]);
899 		}
900 		printf("\n");
901 	}
902 	if (port->tx_queue_stats_mapping_enabled) {
903 		for (i = 0; i < RTE_ETHDEV_QUEUE_STAT_CNTRS; i++) {
904 			printf("  Stats reg %2d TX-packets:%14"PRIu64
905 			       "                                 TX-bytes:%14"PRIu64"\n",
906 			       i, stats->q_opackets[i], stats->q_obytes[i]);
907 		}
908 	}
909 
910 	printf("  %s--------------------------------%s\n",
911 	       fwd_stats_border, fwd_stats_border);
912 }
913 
914 static void
915 fwd_stream_stats_display(streamid_t stream_id)
916 {
917 	struct fwd_stream *fs;
918 	static const char *fwd_top_stats_border = "-------";
919 
920 	fs = fwd_streams[stream_id];
921 	if ((fs->rx_packets == 0) && (fs->tx_packets == 0) &&
922 	    (fs->fwd_dropped == 0))
923 		return;
924 	printf("\n  %s Forward Stats for RX Port=%2d/Queue=%2d -> "
925 	       "TX Port=%2d/Queue=%2d %s\n",
926 	       fwd_top_stats_border, fs->rx_port, fs->rx_queue,
927 	       fs->tx_port, fs->tx_queue, fwd_top_stats_border);
928 	printf("  RX-packets: %-14u TX-packets: %-14u TX-dropped: %-14u",
929 	       fs->rx_packets, fs->tx_packets, fs->fwd_dropped);
930 
931 	/* if checksum mode */
932 	if (cur_fwd_eng == &csum_fwd_engine) {
933 	       printf("  RX- bad IP checksum: %-14u  Rx- bad L4 checksum: "
934 			"%-14u\n", fs->rx_bad_ip_csum, fs->rx_bad_l4_csum);
935 	}
936 
937 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
938 	pkt_burst_stats_display("RX", &fs->rx_burst_stats);
939 	pkt_burst_stats_display("TX", &fs->tx_burst_stats);
940 #endif
941 }
942 
943 static void
944 flush_fwd_rx_queues(void)
945 {
946 	struct rte_mbuf *pkts_burst[MAX_PKT_BURST];
947 	portid_t  rxp;
948 	portid_t port_id;
949 	queueid_t rxq;
950 	uint16_t  nb_rx;
951 	uint16_t  i;
952 	uint8_t   j;
953 	uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0;
954 	uint64_t timer_period;
955 
956 	/* convert to number of cycles */
957 	timer_period = rte_get_timer_hz(); /* 1 second timeout */
958 
959 	for (j = 0; j < 2; j++) {
960 		for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) {
961 			for (rxq = 0; rxq < nb_rxq; rxq++) {
962 				port_id = fwd_ports_ids[rxp];
963 				/**
964 				* testpmd can stuck in the below do while loop
965 				* if rte_eth_rx_burst() always returns nonzero
966 				* packets. So timer is added to exit this loop
967 				* after 1sec timer expiry.
968 				*/
969 				prev_tsc = rte_rdtsc();
970 				do {
971 					nb_rx = rte_eth_rx_burst(port_id, rxq,
972 						pkts_burst, MAX_PKT_BURST);
973 					for (i = 0; i < nb_rx; i++)
974 						rte_pktmbuf_free(pkts_burst[i]);
975 
976 					cur_tsc = rte_rdtsc();
977 					diff_tsc = cur_tsc - prev_tsc;
978 					timer_tsc += diff_tsc;
979 				} while ((nb_rx > 0) &&
980 					(timer_tsc < timer_period));
981 				timer_tsc = 0;
982 			}
983 		}
984 		rte_delay_ms(10); /* wait 10 milli-seconds before retrying */
985 	}
986 }
987 
988 static void
989 run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd)
990 {
991 	struct fwd_stream **fsm;
992 	streamid_t nb_fs;
993 	streamid_t sm_id;
994 #ifdef RTE_LIBRTE_BITRATE
995 	uint64_t tics_per_1sec;
996 	uint64_t tics_datum;
997 	uint64_t tics_current;
998 	uint8_t idx_port, cnt_ports;
999 
1000 	cnt_ports = rte_eth_dev_count();
1001 	tics_datum = rte_rdtsc();
1002 	tics_per_1sec = rte_get_timer_hz();
1003 #endif
1004 	fsm = &fwd_streams[fc->stream_idx];
1005 	nb_fs = fc->stream_nb;
1006 	do {
1007 		for (sm_id = 0; sm_id < nb_fs; sm_id++)
1008 			(*pkt_fwd)(fsm[sm_id]);
1009 #ifdef RTE_LIBRTE_BITRATE
1010 		if (bitrate_enabled != 0 &&
1011 				bitrate_lcore_id == rte_lcore_id()) {
1012 			tics_current = rte_rdtsc();
1013 			if (tics_current - tics_datum >= tics_per_1sec) {
1014 				/* Periodic bitrate calculation */
1015 				for (idx_port = 0;
1016 						idx_port < cnt_ports;
1017 						idx_port++)
1018 					rte_stats_bitrate_calc(bitrate_data,
1019 						idx_port);
1020 				tics_datum = tics_current;
1021 			}
1022 		}
1023 #endif
1024 #ifdef RTE_LIBRTE_LATENCY_STATS
1025 		if (latencystats_enabled != 0 &&
1026 				latencystats_lcore_id == rte_lcore_id())
1027 			rte_latencystats_update();
1028 #endif
1029 
1030 	} while (! fc->stopped);
1031 }
1032 
1033 static int
1034 start_pkt_forward_on_core(void *fwd_arg)
1035 {
1036 	run_pkt_fwd_on_lcore((struct fwd_lcore *) fwd_arg,
1037 			     cur_fwd_config.fwd_eng->packet_fwd);
1038 	return 0;
1039 }
1040 
1041 /*
1042  * Run the TXONLY packet forwarding engine to send a single burst of packets.
1043  * Used to start communication flows in network loopback test configurations.
1044  */
1045 static int
1046 run_one_txonly_burst_on_core(void *fwd_arg)
1047 {
1048 	struct fwd_lcore *fwd_lc;
1049 	struct fwd_lcore tmp_lcore;
1050 
1051 	fwd_lc = (struct fwd_lcore *) fwd_arg;
1052 	tmp_lcore = *fwd_lc;
1053 	tmp_lcore.stopped = 1;
1054 	run_pkt_fwd_on_lcore(&tmp_lcore, tx_only_engine.packet_fwd);
1055 	return 0;
1056 }
1057 
1058 /*
1059  * Launch packet forwarding:
1060  *     - Setup per-port forwarding context.
1061  *     - launch logical cores with their forwarding configuration.
1062  */
1063 static void
1064 launch_packet_forwarding(lcore_function_t *pkt_fwd_on_lcore)
1065 {
1066 	port_fwd_begin_t port_fwd_begin;
1067 	unsigned int i;
1068 	unsigned int lc_id;
1069 	int diag;
1070 
1071 	port_fwd_begin = cur_fwd_config.fwd_eng->port_fwd_begin;
1072 	if (port_fwd_begin != NULL) {
1073 		for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
1074 			(*port_fwd_begin)(fwd_ports_ids[i]);
1075 	}
1076 	for (i = 0; i < cur_fwd_config.nb_fwd_lcores; i++) {
1077 		lc_id = fwd_lcores_cpuids[i];
1078 		if ((interactive == 0) || (lc_id != rte_lcore_id())) {
1079 			fwd_lcores[i]->stopped = 0;
1080 			diag = rte_eal_remote_launch(pkt_fwd_on_lcore,
1081 						     fwd_lcores[i], lc_id);
1082 			if (diag != 0)
1083 				printf("launch lcore %u failed - diag=%d\n",
1084 				       lc_id, diag);
1085 		}
1086 	}
1087 }
1088 
1089 /*
1090  * Launch packet forwarding configuration.
1091  */
1092 void
1093 start_packet_forwarding(int with_tx_first)
1094 {
1095 	port_fwd_begin_t port_fwd_begin;
1096 	port_fwd_end_t  port_fwd_end;
1097 	struct rte_port *port;
1098 	unsigned int i;
1099 	portid_t   pt_id;
1100 	streamid_t sm_id;
1101 
1102 	if (strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") == 0 && !nb_rxq)
1103 		rte_exit(EXIT_FAILURE, "rxq are 0, cannot use rxonly fwd mode\n");
1104 
1105 	if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 && !nb_txq)
1106 		rte_exit(EXIT_FAILURE, "txq are 0, cannot use txonly fwd mode\n");
1107 
1108 	if ((strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") != 0 &&
1109 		strcmp(cur_fwd_eng->fwd_mode_name, "txonly") != 0) &&
1110 		(!nb_rxq || !nb_txq))
1111 		rte_exit(EXIT_FAILURE,
1112 			"Either rxq or txq are 0, cannot use %s fwd mode\n",
1113 			cur_fwd_eng->fwd_mode_name);
1114 
1115 	if (all_ports_started() == 0) {
1116 		printf("Not all ports were started\n");
1117 		return;
1118 	}
1119 	if (test_done == 0) {
1120 		printf("Packet forwarding already started\n");
1121 		return;
1122 	}
1123 
1124 	if (init_fwd_streams() < 0) {
1125 		printf("Fail from init_fwd_streams()\n");
1126 		return;
1127 	}
1128 
1129 	if(dcb_test) {
1130 		for (i = 0; i < nb_fwd_ports; i++) {
1131 			pt_id = fwd_ports_ids[i];
1132 			port = &ports[pt_id];
1133 			if (!port->dcb_flag) {
1134 				printf("In DCB mode, all forwarding ports must "
1135                                        "be configured in this mode.\n");
1136 				return;
1137 			}
1138 		}
1139 		if (nb_fwd_lcores == 1) {
1140 			printf("In DCB mode,the nb forwarding cores "
1141                                "should be larger than 1.\n");
1142 			return;
1143 		}
1144 	}
1145 	test_done = 0;
1146 
1147 	if(!no_flush_rx)
1148 		flush_fwd_rx_queues();
1149 
1150 	fwd_config_setup();
1151 	pkt_fwd_config_display(&cur_fwd_config);
1152 	rxtx_config_display();
1153 
1154 	for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
1155 		pt_id = fwd_ports_ids[i];
1156 		port = &ports[pt_id];
1157 		rte_eth_stats_get(pt_id, &port->stats);
1158 		port->tx_dropped = 0;
1159 
1160 		map_port_queue_stats_mapping_registers(pt_id, port);
1161 	}
1162 	for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
1163 		fwd_streams[sm_id]->rx_packets = 0;
1164 		fwd_streams[sm_id]->tx_packets = 0;
1165 		fwd_streams[sm_id]->fwd_dropped = 0;
1166 		fwd_streams[sm_id]->rx_bad_ip_csum = 0;
1167 		fwd_streams[sm_id]->rx_bad_l4_csum = 0;
1168 
1169 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS
1170 		memset(&fwd_streams[sm_id]->rx_burst_stats, 0,
1171 		       sizeof(fwd_streams[sm_id]->rx_burst_stats));
1172 		memset(&fwd_streams[sm_id]->tx_burst_stats, 0,
1173 		       sizeof(fwd_streams[sm_id]->tx_burst_stats));
1174 #endif
1175 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1176 		fwd_streams[sm_id]->core_cycles = 0;
1177 #endif
1178 	}
1179 	if (with_tx_first) {
1180 		port_fwd_begin = tx_only_engine.port_fwd_begin;
1181 		if (port_fwd_begin != NULL) {
1182 			for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
1183 				(*port_fwd_begin)(fwd_ports_ids[i]);
1184 		}
1185 		while (with_tx_first--) {
1186 			launch_packet_forwarding(
1187 					run_one_txonly_burst_on_core);
1188 			rte_eal_mp_wait_lcore();
1189 		}
1190 		port_fwd_end = tx_only_engine.port_fwd_end;
1191 		if (port_fwd_end != NULL) {
1192 			for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
1193 				(*port_fwd_end)(fwd_ports_ids[i]);
1194 		}
1195 	}
1196 	launch_packet_forwarding(start_pkt_forward_on_core);
1197 }
1198 
1199 void
1200 stop_packet_forwarding(void)
1201 {
1202 	struct rte_eth_stats stats;
1203 	struct rte_port *port;
1204 	port_fwd_end_t  port_fwd_end;
1205 	int i;
1206 	portid_t   pt_id;
1207 	streamid_t sm_id;
1208 	lcoreid_t  lc_id;
1209 	uint64_t total_recv;
1210 	uint64_t total_xmit;
1211 	uint64_t total_rx_dropped;
1212 	uint64_t total_tx_dropped;
1213 	uint64_t total_rx_nombuf;
1214 	uint64_t tx_dropped;
1215 	uint64_t rx_bad_ip_csum;
1216 	uint64_t rx_bad_l4_csum;
1217 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1218 	uint64_t fwd_cycles;
1219 #endif
1220 	static const char *acc_stats_border = "+++++++++++++++";
1221 
1222 	if (test_done) {
1223 		printf("Packet forwarding not started\n");
1224 		return;
1225 	}
1226 	printf("Telling cores to stop...");
1227 	for (lc_id = 0; lc_id < cur_fwd_config.nb_fwd_lcores; lc_id++)
1228 		fwd_lcores[lc_id]->stopped = 1;
1229 	printf("\nWaiting for lcores to finish...\n");
1230 	rte_eal_mp_wait_lcore();
1231 	port_fwd_end = cur_fwd_config.fwd_eng->port_fwd_end;
1232 	if (port_fwd_end != NULL) {
1233 		for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
1234 			pt_id = fwd_ports_ids[i];
1235 			(*port_fwd_end)(pt_id);
1236 		}
1237 	}
1238 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1239 	fwd_cycles = 0;
1240 #endif
1241 	for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) {
1242 		if (cur_fwd_config.nb_fwd_streams >
1243 		    cur_fwd_config.nb_fwd_ports) {
1244 			fwd_stream_stats_display(sm_id);
1245 			ports[fwd_streams[sm_id]->tx_port].tx_stream = NULL;
1246 			ports[fwd_streams[sm_id]->rx_port].rx_stream = NULL;
1247 		} else {
1248 			ports[fwd_streams[sm_id]->tx_port].tx_stream =
1249 				fwd_streams[sm_id];
1250 			ports[fwd_streams[sm_id]->rx_port].rx_stream =
1251 				fwd_streams[sm_id];
1252 		}
1253 		tx_dropped = ports[fwd_streams[sm_id]->tx_port].tx_dropped;
1254 		tx_dropped = (uint64_t) (tx_dropped +
1255 					 fwd_streams[sm_id]->fwd_dropped);
1256 		ports[fwd_streams[sm_id]->tx_port].tx_dropped = tx_dropped;
1257 
1258 		rx_bad_ip_csum =
1259 			ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum;
1260 		rx_bad_ip_csum = (uint64_t) (rx_bad_ip_csum +
1261 					 fwd_streams[sm_id]->rx_bad_ip_csum);
1262 		ports[fwd_streams[sm_id]->rx_port].rx_bad_ip_csum =
1263 							rx_bad_ip_csum;
1264 
1265 		rx_bad_l4_csum =
1266 			ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum;
1267 		rx_bad_l4_csum = (uint64_t) (rx_bad_l4_csum +
1268 					 fwd_streams[sm_id]->rx_bad_l4_csum);
1269 		ports[fwd_streams[sm_id]->rx_port].rx_bad_l4_csum =
1270 							rx_bad_l4_csum;
1271 
1272 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1273 		fwd_cycles = (uint64_t) (fwd_cycles +
1274 					 fwd_streams[sm_id]->core_cycles);
1275 #endif
1276 	}
1277 	total_recv = 0;
1278 	total_xmit = 0;
1279 	total_rx_dropped = 0;
1280 	total_tx_dropped = 0;
1281 	total_rx_nombuf  = 0;
1282 	for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) {
1283 		pt_id = fwd_ports_ids[i];
1284 
1285 		port = &ports[pt_id];
1286 		rte_eth_stats_get(pt_id, &stats);
1287 		stats.ipackets -= port->stats.ipackets;
1288 		port->stats.ipackets = 0;
1289 		stats.opackets -= port->stats.opackets;
1290 		port->stats.opackets = 0;
1291 		stats.ibytes   -= port->stats.ibytes;
1292 		port->stats.ibytes = 0;
1293 		stats.obytes   -= port->stats.obytes;
1294 		port->stats.obytes = 0;
1295 		stats.imissed  -= port->stats.imissed;
1296 		port->stats.imissed = 0;
1297 		stats.oerrors  -= port->stats.oerrors;
1298 		port->stats.oerrors = 0;
1299 		stats.rx_nombuf -= port->stats.rx_nombuf;
1300 		port->stats.rx_nombuf = 0;
1301 
1302 		total_recv += stats.ipackets;
1303 		total_xmit += stats.opackets;
1304 		total_rx_dropped += stats.imissed;
1305 		total_tx_dropped += port->tx_dropped;
1306 		total_rx_nombuf  += stats.rx_nombuf;
1307 
1308 		fwd_port_stats_display(pt_id, &stats);
1309 	}
1310 	printf("\n  %s Accumulated forward statistics for all ports"
1311 	       "%s\n",
1312 	       acc_stats_border, acc_stats_border);
1313 	printf("  RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: "
1314 	       "%-"PRIu64"\n"
1315 	       "  TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: "
1316 	       "%-"PRIu64"\n",
1317 	       total_recv, total_rx_dropped, total_recv + total_rx_dropped,
1318 	       total_xmit, total_tx_dropped, total_xmit + total_tx_dropped);
1319 	if (total_rx_nombuf > 0)
1320 		printf("  RX-nombufs: %-14"PRIu64"\n", total_rx_nombuf);
1321 	printf("  %s++++++++++++++++++++++++++++++++++++++++++++++"
1322 	       "%s\n",
1323 	       acc_stats_border, acc_stats_border);
1324 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES
1325 	if (total_recv > 0)
1326 		printf("\n  CPU cycles/packet=%u (total cycles="
1327 		       "%"PRIu64" / total RX packets=%"PRIu64")\n",
1328 		       (unsigned int)(fwd_cycles / total_recv),
1329 		       fwd_cycles, total_recv);
1330 #endif
1331 	printf("\nDone.\n");
1332 	test_done = 1;
1333 }
1334 
1335 void
1336 dev_set_link_up(portid_t pid)
1337 {
1338 	if (rte_eth_dev_set_link_up((uint8_t)pid) < 0)
1339 		printf("\nSet link up fail.\n");
1340 }
1341 
1342 void
1343 dev_set_link_down(portid_t pid)
1344 {
1345 	if (rte_eth_dev_set_link_down((uint8_t)pid) < 0)
1346 		printf("\nSet link down fail.\n");
1347 }
1348 
1349 static int
1350 all_ports_started(void)
1351 {
1352 	portid_t pi;
1353 	struct rte_port *port;
1354 
1355 	RTE_ETH_FOREACH_DEV(pi) {
1356 		port = &ports[pi];
1357 		/* Check if there is a port which is not started */
1358 		if ((port->port_status != RTE_PORT_STARTED) &&
1359 			(port->slave_flag == 0))
1360 			return 0;
1361 	}
1362 
1363 	/* No port is not started */
1364 	return 1;
1365 }
1366 
1367 int
1368 all_ports_stopped(void)
1369 {
1370 	portid_t pi;
1371 	struct rte_port *port;
1372 
1373 	RTE_ETH_FOREACH_DEV(pi) {
1374 		port = &ports[pi];
1375 		if ((port->port_status != RTE_PORT_STOPPED) &&
1376 			(port->slave_flag == 0))
1377 			return 0;
1378 	}
1379 
1380 	return 1;
1381 }
1382 
1383 int
1384 port_is_started(portid_t port_id)
1385 {
1386 	if (port_id_is_invalid(port_id, ENABLED_WARN))
1387 		return 0;
1388 
1389 	if (ports[port_id].port_status != RTE_PORT_STARTED)
1390 		return 0;
1391 
1392 	return 1;
1393 }
1394 
1395 static int
1396 port_is_closed(portid_t port_id)
1397 {
1398 	if (port_id_is_invalid(port_id, ENABLED_WARN))
1399 		return 0;
1400 
1401 	if (ports[port_id].port_status != RTE_PORT_CLOSED)
1402 		return 0;
1403 
1404 	return 1;
1405 }
1406 
1407 int
1408 start_port(portid_t pid)
1409 {
1410 	int diag, need_check_link_status = -1;
1411 	portid_t pi;
1412 	queueid_t qi;
1413 	struct rte_port *port;
1414 	struct ether_addr mac_addr;
1415 	enum rte_eth_event_type event_type;
1416 
1417 	if (port_id_is_invalid(pid, ENABLED_WARN))
1418 		return 0;
1419 
1420 	if(dcb_config)
1421 		dcb_test = 1;
1422 	RTE_ETH_FOREACH_DEV(pi) {
1423 		if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
1424 			continue;
1425 
1426 		need_check_link_status = 0;
1427 		port = &ports[pi];
1428 		if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED,
1429 						 RTE_PORT_HANDLING) == 0) {
1430 			printf("Port %d is now not stopped\n", pi);
1431 			continue;
1432 		}
1433 
1434 		if (port->need_reconfig > 0) {
1435 			port->need_reconfig = 0;
1436 
1437 			if (flow_isolate_all) {
1438 				int ret = port_flow_isolate(pi, 1);
1439 				if (ret) {
1440 					printf("Failed to apply isolated"
1441 					       " mode on port %d\n", pi);
1442 					return -1;
1443 				}
1444 			}
1445 
1446 			printf("Configuring Port %d (socket %u)\n", pi,
1447 					port->socket_id);
1448 			/* configure port */
1449 			diag = rte_eth_dev_configure(pi, nb_rxq, nb_txq,
1450 						&(port->dev_conf));
1451 			if (diag != 0) {
1452 				if (rte_atomic16_cmpset(&(port->port_status),
1453 				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
1454 					printf("Port %d can not be set back "
1455 							"to stopped\n", pi);
1456 				printf("Fail to configure port %d\n", pi);
1457 				/* try to reconfigure port next time */
1458 				port->need_reconfig = 1;
1459 				return -1;
1460 			}
1461 		}
1462 		if (port->need_reconfig_queues > 0) {
1463 			port->need_reconfig_queues = 0;
1464 			/* setup tx queues */
1465 			for (qi = 0; qi < nb_txq; qi++) {
1466 				if ((numa_support) &&
1467 					(txring_numa[pi] != NUMA_NO_CONFIG))
1468 					diag = rte_eth_tx_queue_setup(pi, qi,
1469 						nb_txd,txring_numa[pi],
1470 						&(port->tx_conf));
1471 				else
1472 					diag = rte_eth_tx_queue_setup(pi, qi,
1473 						nb_txd,port->socket_id,
1474 						&(port->tx_conf));
1475 
1476 				if (diag == 0)
1477 					continue;
1478 
1479 				/* Fail to setup tx queue, return */
1480 				if (rte_atomic16_cmpset(&(port->port_status),
1481 							RTE_PORT_HANDLING,
1482 							RTE_PORT_STOPPED) == 0)
1483 					printf("Port %d can not be set back "
1484 							"to stopped\n", pi);
1485 				printf("Fail to configure port %d tx queues\n", pi);
1486 				/* try to reconfigure queues next time */
1487 				port->need_reconfig_queues = 1;
1488 				return -1;
1489 			}
1490 			/* setup rx queues */
1491 			for (qi = 0; qi < nb_rxq; qi++) {
1492 				if ((numa_support) &&
1493 					(rxring_numa[pi] != NUMA_NO_CONFIG)) {
1494 					struct rte_mempool * mp =
1495 						mbuf_pool_find(rxring_numa[pi]);
1496 					if (mp == NULL) {
1497 						printf("Failed to setup RX queue:"
1498 							"No mempool allocation"
1499 							" on the socket %d\n",
1500 							rxring_numa[pi]);
1501 						return -1;
1502 					}
1503 
1504 					diag = rte_eth_rx_queue_setup(pi, qi,
1505 					     nb_rxd,rxring_numa[pi],
1506 					     &(port->rx_conf),mp);
1507 				} else {
1508 					struct rte_mempool *mp =
1509 						mbuf_pool_find(port->socket_id);
1510 					if (mp == NULL) {
1511 						printf("Failed to setup RX queue:"
1512 							"No mempool allocation"
1513 							" on the socket %d\n",
1514 							port->socket_id);
1515 						return -1;
1516 					}
1517 					diag = rte_eth_rx_queue_setup(pi, qi,
1518 					     nb_rxd,port->socket_id,
1519 					     &(port->rx_conf), mp);
1520 				}
1521 				if (diag == 0)
1522 					continue;
1523 
1524 				/* Fail to setup rx queue, return */
1525 				if (rte_atomic16_cmpset(&(port->port_status),
1526 							RTE_PORT_HANDLING,
1527 							RTE_PORT_STOPPED) == 0)
1528 					printf("Port %d can not be set back "
1529 							"to stopped\n", pi);
1530 				printf("Fail to configure port %d rx queues\n", pi);
1531 				/* try to reconfigure queues next time */
1532 				port->need_reconfig_queues = 1;
1533 				return -1;
1534 			}
1535 		}
1536 
1537 		for (event_type = RTE_ETH_EVENT_UNKNOWN;
1538 		     event_type < RTE_ETH_EVENT_MAX;
1539 		     event_type++) {
1540 			diag = rte_eth_dev_callback_register(pi,
1541 							event_type,
1542 							eth_event_callback,
1543 							NULL);
1544 			if (diag) {
1545 				printf("Failed to setup even callback for event %d\n",
1546 					event_type);
1547 				return -1;
1548 			}
1549 		}
1550 
1551 		/* start port */
1552 		if (rte_eth_dev_start(pi) < 0) {
1553 			printf("Fail to start port %d\n", pi);
1554 
1555 			/* Fail to setup rx queue, return */
1556 			if (rte_atomic16_cmpset(&(port->port_status),
1557 				RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
1558 				printf("Port %d can not be set back to "
1559 							"stopped\n", pi);
1560 			continue;
1561 		}
1562 
1563 		if (rte_atomic16_cmpset(&(port->port_status),
1564 			RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0)
1565 			printf("Port %d can not be set into started\n", pi);
1566 
1567 		rte_eth_macaddr_get(pi, &mac_addr);
1568 		printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi,
1569 				mac_addr.addr_bytes[0], mac_addr.addr_bytes[1],
1570 				mac_addr.addr_bytes[2], mac_addr.addr_bytes[3],
1571 				mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]);
1572 
1573 		/* at least one port started, need checking link status */
1574 		need_check_link_status = 1;
1575 	}
1576 
1577 	if (need_check_link_status == 1 && !no_link_check)
1578 		check_all_ports_link_status(RTE_PORT_ALL);
1579 	else if (need_check_link_status == 0)
1580 		printf("Please stop the ports first\n");
1581 
1582 	printf("Done\n");
1583 	return 0;
1584 }
1585 
1586 void
1587 stop_port(portid_t pid)
1588 {
1589 	portid_t pi;
1590 	struct rte_port *port;
1591 	int need_check_link_status = 0;
1592 
1593 	if (dcb_test) {
1594 		dcb_test = 0;
1595 		dcb_config = 0;
1596 	}
1597 
1598 	if (port_id_is_invalid(pid, ENABLED_WARN))
1599 		return;
1600 
1601 	printf("Stopping ports...\n");
1602 
1603 	RTE_ETH_FOREACH_DEV(pi) {
1604 		if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
1605 			continue;
1606 
1607 		if (port_is_forwarding(pi) != 0 && test_done == 0) {
1608 			printf("Please remove port %d from forwarding configuration.\n", pi);
1609 			continue;
1610 		}
1611 
1612 		if (port_is_bonding_slave(pi)) {
1613 			printf("Please remove port %d from bonded device.\n", pi);
1614 			continue;
1615 		}
1616 
1617 		port = &ports[pi];
1618 		if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED,
1619 						RTE_PORT_HANDLING) == 0)
1620 			continue;
1621 
1622 		rte_eth_dev_stop(pi);
1623 
1624 		if (rte_atomic16_cmpset(&(port->port_status),
1625 			RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0)
1626 			printf("Port %d can not be set into stopped\n", pi);
1627 		need_check_link_status = 1;
1628 	}
1629 	if (need_check_link_status && !no_link_check)
1630 		check_all_ports_link_status(RTE_PORT_ALL);
1631 
1632 	printf("Done\n");
1633 }
1634 
1635 void
1636 close_port(portid_t pid)
1637 {
1638 	portid_t pi;
1639 	struct rte_port *port;
1640 
1641 	if (port_id_is_invalid(pid, ENABLED_WARN))
1642 		return;
1643 
1644 	printf("Closing ports...\n");
1645 
1646 	RTE_ETH_FOREACH_DEV(pi) {
1647 		if (pid != pi && pid != (portid_t)RTE_PORT_ALL)
1648 			continue;
1649 
1650 		if (port_is_forwarding(pi) != 0 && test_done == 0) {
1651 			printf("Please remove port %d from forwarding configuration.\n", pi);
1652 			continue;
1653 		}
1654 
1655 		if (port_is_bonding_slave(pi)) {
1656 			printf("Please remove port %d from bonded device.\n", pi);
1657 			continue;
1658 		}
1659 
1660 		port = &ports[pi];
1661 		if (rte_atomic16_cmpset(&(port->port_status),
1662 			RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) {
1663 			printf("Port %d is already closed\n", pi);
1664 			continue;
1665 		}
1666 
1667 		if (rte_atomic16_cmpset(&(port->port_status),
1668 			RTE_PORT_STOPPED, RTE_PORT_HANDLING) == 0) {
1669 			printf("Port %d is now not stopped\n", pi);
1670 			continue;
1671 		}
1672 
1673 		if (port->flow_list)
1674 			port_flow_flush(pi);
1675 		rte_eth_dev_close(pi);
1676 
1677 		if (rte_atomic16_cmpset(&(port->port_status),
1678 			RTE_PORT_HANDLING, RTE_PORT_CLOSED) == 0)
1679 			printf("Port %d cannot be set to closed\n", pi);
1680 	}
1681 
1682 	printf("Done\n");
1683 }
1684 
1685 void
1686 attach_port(char *identifier)
1687 {
1688 	portid_t pi = 0;
1689 	unsigned int socket_id;
1690 
1691 	printf("Attaching a new port...\n");
1692 
1693 	if (identifier == NULL) {
1694 		printf("Invalid parameters are specified\n");
1695 		return;
1696 	}
1697 
1698 	if (rte_eth_dev_attach(identifier, &pi))
1699 		return;
1700 
1701 	socket_id = (unsigned)rte_eth_dev_socket_id(pi);
1702 	/* if socket_id is invalid, set to 0 */
1703 	if (check_socket_id(socket_id) < 0)
1704 		socket_id = 0;
1705 	reconfig(pi, socket_id);
1706 	rte_eth_promiscuous_enable(pi);
1707 
1708 	nb_ports = rte_eth_dev_count();
1709 
1710 	ports[pi].port_status = RTE_PORT_STOPPED;
1711 
1712 	printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports);
1713 	printf("Done\n");
1714 }
1715 
1716 void
1717 detach_port(uint8_t port_id)
1718 {
1719 	char name[RTE_ETH_NAME_MAX_LEN];
1720 
1721 	printf("Detaching a port...\n");
1722 
1723 	if (!port_is_closed(port_id)) {
1724 		printf("Please close port first\n");
1725 		return;
1726 	}
1727 
1728 	if (ports[port_id].flow_list)
1729 		port_flow_flush(port_id);
1730 
1731 	if (rte_eth_dev_detach(port_id, name))
1732 		return;
1733 
1734 	nb_ports = rte_eth_dev_count();
1735 
1736 	printf("Port '%s' is detached. Now total ports is %d\n",
1737 			name, nb_ports);
1738 	printf("Done\n");
1739 	return;
1740 }
1741 
1742 void
1743 pmd_test_exit(void)
1744 {
1745 	portid_t pt_id;
1746 
1747 	if (test_done == 0)
1748 		stop_packet_forwarding();
1749 
1750 	if (ports != NULL) {
1751 		no_link_check = 1;
1752 		RTE_ETH_FOREACH_DEV(pt_id) {
1753 			printf("\nShutting down port %d...\n", pt_id);
1754 			fflush(stdout);
1755 			stop_port(pt_id);
1756 			close_port(pt_id);
1757 		}
1758 	}
1759 	printf("\nBye...\n");
1760 }
1761 
1762 typedef void (*cmd_func_t)(void);
1763 struct pmd_test_command {
1764 	const char *cmd_name;
1765 	cmd_func_t cmd_func;
1766 };
1767 
1768 #define PMD_TEST_CMD_NB (sizeof(pmd_test_menu) / sizeof(pmd_test_menu[0]))
1769 
1770 /* Check the link status of all ports in up to 9s, and print them finally */
1771 static void
1772 check_all_ports_link_status(uint32_t port_mask)
1773 {
1774 #define CHECK_INTERVAL 100 /* 100ms */
1775 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */
1776 	uint8_t portid, count, all_ports_up, print_flag = 0;
1777 	struct rte_eth_link link;
1778 
1779 	printf("Checking link statuses...\n");
1780 	fflush(stdout);
1781 	for (count = 0; count <= MAX_CHECK_TIME; count++) {
1782 		all_ports_up = 1;
1783 		RTE_ETH_FOREACH_DEV(portid) {
1784 			if ((port_mask & (1 << portid)) == 0)
1785 				continue;
1786 			memset(&link, 0, sizeof(link));
1787 			rte_eth_link_get_nowait(portid, &link);
1788 			/* print link status if flag set */
1789 			if (print_flag == 1) {
1790 				if (link.link_status)
1791 					printf("Port %d Link Up - speed %u "
1792 						"Mbps - %s\n", (uint8_t)portid,
1793 						(unsigned)link.link_speed,
1794 				(link.link_duplex == ETH_LINK_FULL_DUPLEX) ?
1795 					("full-duplex") : ("half-duplex\n"));
1796 				else
1797 					printf("Port %d Link Down\n",
1798 						(uint8_t)portid);
1799 				continue;
1800 			}
1801 			/* clear all_ports_up flag if any link down */
1802 			if (link.link_status == ETH_LINK_DOWN) {
1803 				all_ports_up = 0;
1804 				break;
1805 			}
1806 		}
1807 		/* after finally printing all link status, get out */
1808 		if (print_flag == 1)
1809 			break;
1810 
1811 		if (all_ports_up == 0) {
1812 			fflush(stdout);
1813 			rte_delay_ms(CHECK_INTERVAL);
1814 		}
1815 
1816 		/* set the print_flag if all ports up or timeout */
1817 		if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) {
1818 			print_flag = 1;
1819 		}
1820 
1821 		if (lsc_interrupt)
1822 			break;
1823 	}
1824 }
1825 
1826 static void
1827 rmv_event_callback(void *arg)
1828 {
1829 	struct rte_eth_dev *dev;
1830 	uint8_t port_id = (intptr_t)arg;
1831 
1832 	RTE_ETH_VALID_PORTID_OR_RET(port_id);
1833 	dev = &rte_eth_devices[port_id];
1834 
1835 	stop_port(port_id);
1836 	close_port(port_id);
1837 	printf("removing device %s\n", dev->device->name);
1838 	rte_eal_dev_detach(dev->device);
1839 }
1840 
1841 /* This function is used by the interrupt thread */
1842 static int
1843 eth_event_callback(uint8_t port_id, enum rte_eth_event_type type, void *param,
1844 		  void *ret_param)
1845 {
1846 	static const char * const event_desc[] = {
1847 		[RTE_ETH_EVENT_UNKNOWN] = "Unknown",
1848 		[RTE_ETH_EVENT_INTR_LSC] = "LSC",
1849 		[RTE_ETH_EVENT_QUEUE_STATE] = "Queue state",
1850 		[RTE_ETH_EVENT_INTR_RESET] = "Interrupt reset",
1851 		[RTE_ETH_EVENT_VF_MBOX] = "VF Mbox",
1852 		[RTE_ETH_EVENT_MACSEC] = "MACsec",
1853 		[RTE_ETH_EVENT_INTR_RMV] = "device removal",
1854 		[RTE_ETH_EVENT_MAX] = NULL,
1855 	};
1856 
1857 	RTE_SET_USED(param);
1858 	RTE_SET_USED(ret_param);
1859 
1860 	if (type >= RTE_ETH_EVENT_MAX) {
1861 		fprintf(stderr, "\nPort %" PRIu8 ": %s called upon invalid event %d\n",
1862 			port_id, __func__, type);
1863 		fflush(stderr);
1864 	} else if (event_print_mask & (UINT32_C(1) << type)) {
1865 		printf("\nPort %" PRIu8 ": %s event\n", port_id,
1866 			event_desc[type]);
1867 		fflush(stdout);
1868 	}
1869 
1870 	switch (type) {
1871 	case RTE_ETH_EVENT_INTR_RMV:
1872 		if (rte_eal_alarm_set(100000,
1873 				rmv_event_callback, (void *)(intptr_t)port_id))
1874 			fprintf(stderr, "Could not set up deferred device removal\n");
1875 		break;
1876 	default:
1877 		break;
1878 	}
1879 	return 0;
1880 }
1881 
1882 static int
1883 set_tx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
1884 {
1885 	uint16_t i;
1886 	int diag;
1887 	uint8_t mapping_found = 0;
1888 
1889 	for (i = 0; i < nb_tx_queue_stats_mappings; i++) {
1890 		if ((tx_queue_stats_mappings[i].port_id == port_id) &&
1891 				(tx_queue_stats_mappings[i].queue_id < nb_txq )) {
1892 			diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id,
1893 					tx_queue_stats_mappings[i].queue_id,
1894 					tx_queue_stats_mappings[i].stats_counter_id);
1895 			if (diag != 0)
1896 				return diag;
1897 			mapping_found = 1;
1898 		}
1899 	}
1900 	if (mapping_found)
1901 		port->tx_queue_stats_mapping_enabled = 1;
1902 	return 0;
1903 }
1904 
1905 static int
1906 set_rx_queue_stats_mapping_registers(uint8_t port_id, struct rte_port *port)
1907 {
1908 	uint16_t i;
1909 	int diag;
1910 	uint8_t mapping_found = 0;
1911 
1912 	for (i = 0; i < nb_rx_queue_stats_mappings; i++) {
1913 		if ((rx_queue_stats_mappings[i].port_id == port_id) &&
1914 				(rx_queue_stats_mappings[i].queue_id < nb_rxq )) {
1915 			diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id,
1916 					rx_queue_stats_mappings[i].queue_id,
1917 					rx_queue_stats_mappings[i].stats_counter_id);
1918 			if (diag != 0)
1919 				return diag;
1920 			mapping_found = 1;
1921 		}
1922 	}
1923 	if (mapping_found)
1924 		port->rx_queue_stats_mapping_enabled = 1;
1925 	return 0;
1926 }
1927 
1928 static void
1929 map_port_queue_stats_mapping_registers(uint8_t pi, struct rte_port *port)
1930 {
1931 	int diag = 0;
1932 
1933 	diag = set_tx_queue_stats_mapping_registers(pi, port);
1934 	if (diag != 0) {
1935 		if (diag == -ENOTSUP) {
1936 			port->tx_queue_stats_mapping_enabled = 0;
1937 			printf("TX queue stats mapping not supported port id=%d\n", pi);
1938 		}
1939 		else
1940 			rte_exit(EXIT_FAILURE,
1941 					"set_tx_queue_stats_mapping_registers "
1942 					"failed for port id=%d diag=%d\n",
1943 					pi, diag);
1944 	}
1945 
1946 	diag = set_rx_queue_stats_mapping_registers(pi, port);
1947 	if (diag != 0) {
1948 		if (diag == -ENOTSUP) {
1949 			port->rx_queue_stats_mapping_enabled = 0;
1950 			printf("RX queue stats mapping not supported port id=%d\n", pi);
1951 		}
1952 		else
1953 			rte_exit(EXIT_FAILURE,
1954 					"set_rx_queue_stats_mapping_registers "
1955 					"failed for port id=%d diag=%d\n",
1956 					pi, diag);
1957 	}
1958 }
1959 
1960 static void
1961 rxtx_port_config(struct rte_port *port)
1962 {
1963 	port->rx_conf = port->dev_info.default_rxconf;
1964 	port->tx_conf = port->dev_info.default_txconf;
1965 
1966 	/* Check if any RX/TX parameters have been passed */
1967 	if (rx_pthresh != RTE_PMD_PARAM_UNSET)
1968 		port->rx_conf.rx_thresh.pthresh = rx_pthresh;
1969 
1970 	if (rx_hthresh != RTE_PMD_PARAM_UNSET)
1971 		port->rx_conf.rx_thresh.hthresh = rx_hthresh;
1972 
1973 	if (rx_wthresh != RTE_PMD_PARAM_UNSET)
1974 		port->rx_conf.rx_thresh.wthresh = rx_wthresh;
1975 
1976 	if (rx_free_thresh != RTE_PMD_PARAM_UNSET)
1977 		port->rx_conf.rx_free_thresh = rx_free_thresh;
1978 
1979 	if (rx_drop_en != RTE_PMD_PARAM_UNSET)
1980 		port->rx_conf.rx_drop_en = rx_drop_en;
1981 
1982 	if (tx_pthresh != RTE_PMD_PARAM_UNSET)
1983 		port->tx_conf.tx_thresh.pthresh = tx_pthresh;
1984 
1985 	if (tx_hthresh != RTE_PMD_PARAM_UNSET)
1986 		port->tx_conf.tx_thresh.hthresh = tx_hthresh;
1987 
1988 	if (tx_wthresh != RTE_PMD_PARAM_UNSET)
1989 		port->tx_conf.tx_thresh.wthresh = tx_wthresh;
1990 
1991 	if (tx_rs_thresh != RTE_PMD_PARAM_UNSET)
1992 		port->tx_conf.tx_rs_thresh = tx_rs_thresh;
1993 
1994 	if (tx_free_thresh != RTE_PMD_PARAM_UNSET)
1995 		port->tx_conf.tx_free_thresh = tx_free_thresh;
1996 
1997 	if (txq_flags != RTE_PMD_PARAM_UNSET)
1998 		port->tx_conf.txq_flags = txq_flags;
1999 }
2000 
2001 void
2002 init_port_config(void)
2003 {
2004 	portid_t pid;
2005 	struct rte_port *port;
2006 
2007 	RTE_ETH_FOREACH_DEV(pid) {
2008 		port = &ports[pid];
2009 		port->dev_conf.rxmode = rx_mode;
2010 		port->dev_conf.fdir_conf = fdir_conf;
2011 		if (nb_rxq > 1) {
2012 			port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
2013 			port->dev_conf.rx_adv_conf.rss_conf.rss_hf = rss_hf;
2014 		} else {
2015 			port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL;
2016 			port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0;
2017 		}
2018 
2019 		if (port->dcb_flag == 0) {
2020 			if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0)
2021 				port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS;
2022 			else
2023 				port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE;
2024 		}
2025 
2026 		rxtx_port_config(port);
2027 
2028 		rte_eth_macaddr_get(pid, &port->eth_addr);
2029 
2030 		map_port_queue_stats_mapping_registers(pid, port);
2031 #if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS
2032 		rte_pmd_ixgbe_bypass_init(pid);
2033 #endif
2034 
2035 		if (lsc_interrupt &&
2036 		    (rte_eth_devices[pid].data->dev_flags &
2037 		     RTE_ETH_DEV_INTR_LSC))
2038 			port->dev_conf.intr_conf.lsc = 1;
2039 		if (rmv_interrupt &&
2040 		    (rte_eth_devices[pid].data->dev_flags &
2041 		     RTE_ETH_DEV_INTR_RMV))
2042 			port->dev_conf.intr_conf.rmv = 1;
2043 	}
2044 }
2045 
2046 void set_port_slave_flag(portid_t slave_pid)
2047 {
2048 	struct rte_port *port;
2049 
2050 	port = &ports[slave_pid];
2051 	port->slave_flag = 1;
2052 }
2053 
2054 void clear_port_slave_flag(portid_t slave_pid)
2055 {
2056 	struct rte_port *port;
2057 
2058 	port = &ports[slave_pid];
2059 	port->slave_flag = 0;
2060 }
2061 
2062 uint8_t port_is_bonding_slave(portid_t slave_pid)
2063 {
2064 	struct rte_port *port;
2065 
2066 	port = &ports[slave_pid];
2067 	return port->slave_flag;
2068 }
2069 
2070 const uint16_t vlan_tags[] = {
2071 		0,  1,  2,  3,  4,  5,  6,  7,
2072 		8,  9, 10, 11,  12, 13, 14, 15,
2073 		16, 17, 18, 19, 20, 21, 22, 23,
2074 		24, 25, 26, 27, 28, 29, 30, 31
2075 };
2076 
2077 static  int
2078 get_eth_dcb_conf(struct rte_eth_conf *eth_conf,
2079 		 enum dcb_mode_enable dcb_mode,
2080 		 enum rte_eth_nb_tcs num_tcs,
2081 		 uint8_t pfc_en)
2082 {
2083 	uint8_t i;
2084 
2085 	/*
2086 	 * Builds up the correct configuration for dcb+vt based on the vlan tags array
2087 	 * given above, and the number of traffic classes available for use.
2088 	 */
2089 	if (dcb_mode == DCB_VT_ENABLED) {
2090 		struct rte_eth_vmdq_dcb_conf *vmdq_rx_conf =
2091 				&eth_conf->rx_adv_conf.vmdq_dcb_conf;
2092 		struct rte_eth_vmdq_dcb_tx_conf *vmdq_tx_conf =
2093 				&eth_conf->tx_adv_conf.vmdq_dcb_tx_conf;
2094 
2095 		/* VMDQ+DCB RX and TX configurations */
2096 		vmdq_rx_conf->enable_default_pool = 0;
2097 		vmdq_rx_conf->default_pool = 0;
2098 		vmdq_rx_conf->nb_queue_pools =
2099 			(num_tcs ==  ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);
2100 		vmdq_tx_conf->nb_queue_pools =
2101 			(num_tcs ==  ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS);
2102 
2103 		vmdq_rx_conf->nb_pool_maps = vmdq_rx_conf->nb_queue_pools;
2104 		for (i = 0; i < vmdq_rx_conf->nb_pool_maps; i++) {
2105 			vmdq_rx_conf->pool_map[i].vlan_id = vlan_tags[i];
2106 			vmdq_rx_conf->pool_map[i].pools =
2107 				1 << (i % vmdq_rx_conf->nb_queue_pools);
2108 		}
2109 		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
2110 			vmdq_rx_conf->dcb_tc[i] = i;
2111 			vmdq_tx_conf->dcb_tc[i] = i;
2112 		}
2113 
2114 		/* set DCB mode of RX and TX of multiple queues */
2115 		eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB;
2116 		eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB;
2117 	} else {
2118 		struct rte_eth_dcb_rx_conf *rx_conf =
2119 				&eth_conf->rx_adv_conf.dcb_rx_conf;
2120 		struct rte_eth_dcb_tx_conf *tx_conf =
2121 				&eth_conf->tx_adv_conf.dcb_tx_conf;
2122 
2123 		rx_conf->nb_tcs = num_tcs;
2124 		tx_conf->nb_tcs = num_tcs;
2125 
2126 		for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) {
2127 			rx_conf->dcb_tc[i] = i % num_tcs;
2128 			tx_conf->dcb_tc[i] = i % num_tcs;
2129 		}
2130 		eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS;
2131 		eth_conf->rx_adv_conf.rss_conf.rss_hf = rss_hf;
2132 		eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB;
2133 	}
2134 
2135 	if (pfc_en)
2136 		eth_conf->dcb_capability_en =
2137 				ETH_DCB_PG_SUPPORT | ETH_DCB_PFC_SUPPORT;
2138 	else
2139 		eth_conf->dcb_capability_en = ETH_DCB_PG_SUPPORT;
2140 
2141 	return 0;
2142 }
2143 
2144 int
2145 init_port_dcb_config(portid_t pid,
2146 		     enum dcb_mode_enable dcb_mode,
2147 		     enum rte_eth_nb_tcs num_tcs,
2148 		     uint8_t pfc_en)
2149 {
2150 	struct rte_eth_conf port_conf;
2151 	struct rte_port *rte_port;
2152 	int retval;
2153 	uint16_t i;
2154 
2155 	rte_port = &ports[pid];
2156 
2157 	memset(&port_conf, 0, sizeof(struct rte_eth_conf));
2158 	/* Enter DCB configuration status */
2159 	dcb_config = 1;
2160 
2161 	/*set configuration of DCB in vt mode and DCB in non-vt mode*/
2162 	retval = get_eth_dcb_conf(&port_conf, dcb_mode, num_tcs, pfc_en);
2163 	if (retval < 0)
2164 		return retval;
2165 	port_conf.rxmode.hw_vlan_filter = 1;
2166 
2167 	/**
2168 	 * Write the configuration into the device.
2169 	 * Set the numbers of RX & TX queues to 0, so
2170 	 * the RX & TX queues will not be setup.
2171 	 */
2172 	(void)rte_eth_dev_configure(pid, 0, 0, &port_conf);
2173 
2174 	rte_eth_dev_info_get(pid, &rte_port->dev_info);
2175 
2176 	/* If dev_info.vmdq_pool_base is greater than 0,
2177 	 * the queue id of vmdq pools is started after pf queues.
2178 	 */
2179 	if (dcb_mode == DCB_VT_ENABLED &&
2180 	    rte_port->dev_info.vmdq_pool_base > 0) {
2181 		printf("VMDQ_DCB multi-queue mode is nonsensical"
2182 			" for port %d.", pid);
2183 		return -1;
2184 	}
2185 
2186 	/* Assume the ports in testpmd have the same dcb capability
2187 	 * and has the same number of rxq and txq in dcb mode
2188 	 */
2189 	if (dcb_mode == DCB_VT_ENABLED) {
2190 		if (rte_port->dev_info.max_vfs > 0) {
2191 			nb_rxq = rte_port->dev_info.nb_rx_queues;
2192 			nb_txq = rte_port->dev_info.nb_tx_queues;
2193 		} else {
2194 			nb_rxq = rte_port->dev_info.max_rx_queues;
2195 			nb_txq = rte_port->dev_info.max_tx_queues;
2196 		}
2197 	} else {
2198 		/*if vt is disabled, use all pf queues */
2199 		if (rte_port->dev_info.vmdq_pool_base == 0) {
2200 			nb_rxq = rte_port->dev_info.max_rx_queues;
2201 			nb_txq = rte_port->dev_info.max_tx_queues;
2202 		} else {
2203 			nb_rxq = (queueid_t)num_tcs;
2204 			nb_txq = (queueid_t)num_tcs;
2205 
2206 		}
2207 	}
2208 	rx_free_thresh = 64;
2209 
2210 	memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf));
2211 
2212 	rxtx_port_config(rte_port);
2213 	/* VLAN filter */
2214 	rte_port->dev_conf.rxmode.hw_vlan_filter = 1;
2215 	for (i = 0; i < RTE_DIM(vlan_tags); i++)
2216 		rx_vft_set(pid, vlan_tags[i], 1);
2217 
2218 	rte_eth_macaddr_get(pid, &rte_port->eth_addr);
2219 	map_port_queue_stats_mapping_registers(pid, rte_port);
2220 
2221 	rte_port->dcb_flag = 1;
2222 
2223 	return 0;
2224 }
2225 
2226 static void
2227 init_port(void)
2228 {
2229 	/* Configuration of Ethernet ports. */
2230 	ports = rte_zmalloc("testpmd: ports",
2231 			    sizeof(struct rte_port) * RTE_MAX_ETHPORTS,
2232 			    RTE_CACHE_LINE_SIZE);
2233 	if (ports == NULL) {
2234 		rte_exit(EXIT_FAILURE,
2235 				"rte_zmalloc(%d struct rte_port) failed\n",
2236 				RTE_MAX_ETHPORTS);
2237 	}
2238 }
2239 
2240 static void
2241 force_quit(void)
2242 {
2243 	pmd_test_exit();
2244 	prompt_exit();
2245 }
2246 
2247 static void
2248 print_stats(void)
2249 {
2250 	uint8_t i;
2251 	const char clr[] = { 27, '[', '2', 'J', '\0' };
2252 	const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' };
2253 
2254 	/* Clear screen and move to top left */
2255 	printf("%s%s", clr, top_left);
2256 
2257 	printf("\nPort statistics ====================================");
2258 	for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++)
2259 		nic_stats_display(fwd_ports_ids[i]);
2260 }
2261 
2262 static void
2263 signal_handler(int signum)
2264 {
2265 	if (signum == SIGINT || signum == SIGTERM) {
2266 		printf("\nSignal %d received, preparing to exit...\n",
2267 				signum);
2268 #ifdef RTE_LIBRTE_PDUMP
2269 		/* uninitialize packet capture framework */
2270 		rte_pdump_uninit();
2271 #endif
2272 #ifdef RTE_LIBRTE_LATENCY_STATS
2273 		rte_latencystats_uninit();
2274 #endif
2275 		force_quit();
2276 		/* exit with the expected status */
2277 		signal(signum, SIG_DFL);
2278 		kill(getpid(), signum);
2279 	}
2280 }
2281 
2282 int
2283 main(int argc, char** argv)
2284 {
2285 	int  diag;
2286 	uint8_t port_id;
2287 
2288 	signal(SIGINT, signal_handler);
2289 	signal(SIGTERM, signal_handler);
2290 
2291 	diag = rte_eal_init(argc, argv);
2292 	if (diag < 0)
2293 		rte_panic("Cannot init EAL\n");
2294 
2295 #ifdef RTE_LIBRTE_PDUMP
2296 	/* initialize packet capture framework */
2297 	rte_pdump_init(NULL);
2298 #endif
2299 
2300 	nb_ports = (portid_t) rte_eth_dev_count();
2301 	if (nb_ports == 0)
2302 		RTE_LOG(WARNING, EAL, "No probed ethernet devices\n");
2303 
2304 	/* allocate port structures, and init them */
2305 	init_port();
2306 
2307 	set_def_fwd_config();
2308 	if (nb_lcores == 0)
2309 		rte_panic("Empty set of forwarding logical cores - check the "
2310 			  "core mask supplied in the command parameters\n");
2311 
2312 	/* Bitrate/latency stats disabled by default */
2313 #ifdef RTE_LIBRTE_BITRATE
2314 	bitrate_enabled = 0;
2315 #endif
2316 #ifdef RTE_LIBRTE_LATENCY_STATS
2317 	latencystats_enabled = 0;
2318 #endif
2319 
2320 	argc -= diag;
2321 	argv += diag;
2322 	if (argc > 1)
2323 		launch_args_parse(argc, argv);
2324 
2325 	if (tx_first && interactive)
2326 		rte_exit(EXIT_FAILURE, "--tx-first cannot be used on "
2327 				"interactive mode.\n");
2328 	if (!nb_rxq && !nb_txq)
2329 		printf("Warning: Either rx or tx queues should be non-zero\n");
2330 
2331 	if (nb_rxq > 1 && nb_rxq > nb_txq)
2332 		printf("Warning: nb_rxq=%d enables RSS configuration, "
2333 		       "but nb_txq=%d will prevent to fully test it.\n",
2334 		       nb_rxq, nb_txq);
2335 
2336 	init_config();
2337 	if (start_port(RTE_PORT_ALL) != 0)
2338 		rte_exit(EXIT_FAILURE, "Start ports failed\n");
2339 
2340 	/* set all ports to promiscuous mode by default */
2341 	RTE_ETH_FOREACH_DEV(port_id)
2342 		rte_eth_promiscuous_enable(port_id);
2343 
2344 	/* Init metrics library */
2345 	rte_metrics_init(rte_socket_id());
2346 
2347 #ifdef RTE_LIBRTE_LATENCY_STATS
2348 	if (latencystats_enabled != 0) {
2349 		int ret = rte_latencystats_init(1, NULL);
2350 		if (ret)
2351 			printf("Warning: latencystats init()"
2352 				" returned error %d\n",	ret);
2353 		printf("Latencystats running on lcore %d\n",
2354 			latencystats_lcore_id);
2355 	}
2356 #endif
2357 
2358 	/* Setup bitrate stats */
2359 #ifdef RTE_LIBRTE_BITRATE
2360 	if (bitrate_enabled != 0) {
2361 		bitrate_data = rte_stats_bitrate_create();
2362 		if (bitrate_data == NULL)
2363 			rte_exit(EXIT_FAILURE,
2364 				"Could not allocate bitrate data.\n");
2365 		rte_stats_bitrate_reg(bitrate_data);
2366 	}
2367 #endif
2368 
2369 #ifdef RTE_LIBRTE_CMDLINE
2370 	if (strlen(cmdline_filename) != 0)
2371 		cmdline_read_from_file(cmdline_filename);
2372 
2373 	if (interactive == 1) {
2374 		if (auto_start) {
2375 			printf("Start automatic packet forwarding\n");
2376 			start_packet_forwarding(0);
2377 		}
2378 		prompt();
2379 		pmd_test_exit();
2380 	} else
2381 #endif
2382 	{
2383 		char c;
2384 		int rc;
2385 
2386 		printf("No commandline core given, start packet forwarding\n");
2387 		start_packet_forwarding(tx_first);
2388 		if (stats_period != 0) {
2389 			uint64_t prev_time = 0, cur_time, diff_time = 0;
2390 			uint64_t timer_period;
2391 
2392 			/* Convert to number of cycles */
2393 			timer_period = stats_period * rte_get_timer_hz();
2394 
2395 			while (1) {
2396 				cur_time = rte_get_timer_cycles();
2397 				diff_time += cur_time - prev_time;
2398 
2399 				if (diff_time >= timer_period) {
2400 					print_stats();
2401 					/* Reset the timer */
2402 					diff_time = 0;
2403 				}
2404 				/* Sleep to avoid unnecessary checks */
2405 				prev_time = cur_time;
2406 				sleep(1);
2407 			}
2408 		}
2409 
2410 		printf("Press enter to exit\n");
2411 		rc = read(0, &c, 1);
2412 		pmd_test_exit();
2413 		if (rc < 0)
2414 			return 1;
2415 	}
2416 
2417 	return 0;
2418 }
2419