1 /* SPDX-License-Identifier: BSD-3-Clause 2 * Copyright(c) 2010-2017 Intel Corporation 3 */ 4 5 #include <stdarg.h> 6 #include <stdio.h> 7 #include <stdlib.h> 8 #include <signal.h> 9 #include <string.h> 10 #include <time.h> 11 #include <fcntl.h> 12 #include <sys/mman.h> 13 #include <sys/types.h> 14 #include <errno.h> 15 #include <stdbool.h> 16 17 #include <sys/queue.h> 18 #include <sys/stat.h> 19 20 #include <stdint.h> 21 #include <unistd.h> 22 #include <inttypes.h> 23 24 #include <rte_common.h> 25 #include <rte_errno.h> 26 #include <rte_byteorder.h> 27 #include <rte_log.h> 28 #include <rte_debug.h> 29 #include <rte_cycles.h> 30 #include <rte_memory.h> 31 #include <rte_memcpy.h> 32 #include <rte_launch.h> 33 #include <rte_eal.h> 34 #include <rte_alarm.h> 35 #include <rte_per_lcore.h> 36 #include <rte_lcore.h> 37 #include <rte_atomic.h> 38 #include <rte_branch_prediction.h> 39 #include <rte_mempool.h> 40 #include <rte_malloc.h> 41 #include <rte_mbuf.h> 42 #include <rte_mbuf_pool_ops.h> 43 #include <rte_interrupts.h> 44 #include <rte_pci.h> 45 #include <rte_ether.h> 46 #include <rte_ethdev.h> 47 #include <rte_dev.h> 48 #include <rte_string_fns.h> 49 #ifdef RTE_LIBRTE_IXGBE_PMD 50 #include <rte_pmd_ixgbe.h> 51 #endif 52 #ifdef RTE_LIBRTE_PDUMP 53 #include <rte_pdump.h> 54 #endif 55 #include <rte_flow.h> 56 #include <rte_metrics.h> 57 #ifdef RTE_LIBRTE_BITRATE 58 #include <rte_bitrate.h> 59 #endif 60 #ifdef RTE_LIBRTE_LATENCY_STATS 61 #include <rte_latencystats.h> 62 #endif 63 64 #include "testpmd.h" 65 66 #ifndef MAP_HUGETLB 67 /* FreeBSD may not have MAP_HUGETLB (in fact, it probably doesn't) */ 68 #define HUGE_FLAG (0x40000) 69 #else 70 #define HUGE_FLAG MAP_HUGETLB 71 #endif 72 73 #ifndef MAP_HUGE_SHIFT 74 /* older kernels (or FreeBSD) will not have this define */ 75 #define HUGE_SHIFT (26) 76 #else 77 #define HUGE_SHIFT MAP_HUGE_SHIFT 78 #endif 79 80 #define EXTMEM_HEAP_NAME "extmem" 81 #define EXTBUF_ZONE_SIZE RTE_PGSIZE_2M 82 83 uint16_t verbose_level = 0; /**< Silent by default. */ 84 int testpmd_logtype; /**< Log type for testpmd logs */ 85 86 /* use master core for command line ? */ 87 uint8_t interactive = 0; 88 uint8_t auto_start = 0; 89 uint8_t tx_first; 90 char cmdline_filename[PATH_MAX] = {0}; 91 92 /* 93 * NUMA support configuration. 94 * When set, the NUMA support attempts to dispatch the allocation of the 95 * RX and TX memory rings, and of the DMA memory buffers (mbufs) for the 96 * probed ports among the CPU sockets 0 and 1. 97 * Otherwise, all memory is allocated from CPU socket 0. 98 */ 99 uint8_t numa_support = 1; /**< numa enabled by default */ 100 101 /* 102 * In UMA mode,all memory is allocated from socket 0 if --socket-num is 103 * not configured. 104 */ 105 uint8_t socket_num = UMA_NO_CONFIG; 106 107 /* 108 * Select mempool allocation type: 109 * - native: use regular DPDK memory 110 * - anon: use regular DPDK memory to create mempool, but populate using 111 * anonymous memory (may not be IOVA-contiguous) 112 * - xmem: use externally allocated hugepage memory 113 */ 114 uint8_t mp_alloc_type = MP_ALLOC_NATIVE; 115 116 /* 117 * Store specified sockets on which memory pool to be used by ports 118 * is allocated. 119 */ 120 uint8_t port_numa[RTE_MAX_ETHPORTS]; 121 122 /* 123 * Store specified sockets on which RX ring to be used by ports 124 * is allocated. 125 */ 126 uint8_t rxring_numa[RTE_MAX_ETHPORTS]; 127 128 /* 129 * Store specified sockets on which TX ring to be used by ports 130 * is allocated. 131 */ 132 uint8_t txring_numa[RTE_MAX_ETHPORTS]; 133 134 /* 135 * Record the Ethernet address of peer target ports to which packets are 136 * forwarded. 137 * Must be instantiated with the ethernet addresses of peer traffic generator 138 * ports. 139 */ 140 struct rte_ether_addr peer_eth_addrs[RTE_MAX_ETHPORTS]; 141 portid_t nb_peer_eth_addrs = 0; 142 143 /* 144 * Probed Target Environment. 145 */ 146 struct rte_port *ports; /**< For all probed ethernet ports. */ 147 portid_t nb_ports; /**< Number of probed ethernet ports. */ 148 struct fwd_lcore **fwd_lcores; /**< For all probed logical cores. */ 149 lcoreid_t nb_lcores; /**< Number of probed logical cores. */ 150 151 portid_t ports_ids[RTE_MAX_ETHPORTS]; /**< Store all port ids. */ 152 153 /* 154 * Test Forwarding Configuration. 155 * nb_fwd_lcores <= nb_cfg_lcores <= nb_lcores 156 * nb_fwd_ports <= nb_cfg_ports <= nb_ports 157 */ 158 lcoreid_t nb_cfg_lcores; /**< Number of configured logical cores. */ 159 lcoreid_t nb_fwd_lcores; /**< Number of forwarding logical cores. */ 160 portid_t nb_cfg_ports; /**< Number of configured ports. */ 161 portid_t nb_fwd_ports; /**< Number of forwarding ports. */ 162 163 unsigned int fwd_lcores_cpuids[RTE_MAX_LCORE]; /**< CPU ids configuration. */ 164 portid_t fwd_ports_ids[RTE_MAX_ETHPORTS]; /**< Port ids configuration. */ 165 166 struct fwd_stream **fwd_streams; /**< For each RX queue of each port. */ 167 streamid_t nb_fwd_streams; /**< Is equal to (nb_ports * nb_rxq). */ 168 169 /* 170 * Forwarding engines. 171 */ 172 struct fwd_engine * fwd_engines[] = { 173 &io_fwd_engine, 174 &mac_fwd_engine, 175 &mac_swap_engine, 176 &flow_gen_engine, 177 &rx_only_engine, 178 &tx_only_engine, 179 &csum_fwd_engine, 180 &icmp_echo_engine, 181 &noisy_vnf_engine, 182 #if defined RTE_LIBRTE_PMD_SOFTNIC 183 &softnic_fwd_engine, 184 #endif 185 #ifdef RTE_LIBRTE_IEEE1588 186 &ieee1588_fwd_engine, 187 #endif 188 NULL, 189 }; 190 191 struct rte_mempool *mempools[RTE_MAX_NUMA_NODES]; 192 uint16_t mempool_flags; 193 194 struct fwd_config cur_fwd_config; 195 struct fwd_engine *cur_fwd_eng = &io_fwd_engine; /**< IO mode by default. */ 196 uint32_t retry_enabled; 197 uint32_t burst_tx_delay_time = BURST_TX_WAIT_US; 198 uint32_t burst_tx_retry_num = BURST_TX_RETRIES; 199 200 uint16_t mbuf_data_size = DEFAULT_MBUF_DATA_SIZE; /**< Mbuf data space size. */ 201 uint32_t param_total_num_mbufs = 0; /**< number of mbufs in all pools - if 202 * specified on command-line. */ 203 uint16_t stats_period; /**< Period to show statistics (disabled by default) */ 204 205 /* 206 * In container, it cannot terminate the process which running with 'stats-period' 207 * option. Set flag to exit stats period loop after received SIGINT/SIGTERM. 208 */ 209 uint8_t f_quit; 210 211 /* 212 * Configuration of packet segments used by the "txonly" processing engine. 213 */ 214 uint16_t tx_pkt_length = TXONLY_DEF_PACKET_LEN; /**< TXONLY packet length. */ 215 uint16_t tx_pkt_seg_lengths[RTE_MAX_SEGS_PER_PKT] = { 216 TXONLY_DEF_PACKET_LEN, 217 }; 218 uint8_t tx_pkt_nb_segs = 1; /**< Number of segments in TXONLY packets */ 219 220 enum tx_pkt_split tx_pkt_split = TX_PKT_SPLIT_OFF; 221 /**< Split policy for packets to TX. */ 222 223 uint8_t txonly_multi_flow; 224 /**< Whether multiple flows are generated in TXONLY mode. */ 225 226 uint16_t nb_pkt_per_burst = DEF_PKT_BURST; /**< Number of packets per burst. */ 227 uint16_t mb_mempool_cache = DEF_MBUF_CACHE; /**< Size of mbuf mempool cache. */ 228 229 /* current configuration is in DCB or not,0 means it is not in DCB mode */ 230 uint8_t dcb_config = 0; 231 232 /* Whether the dcb is in testing status */ 233 uint8_t dcb_test = 0; 234 235 /* 236 * Configurable number of RX/TX queues. 237 */ 238 queueid_t nb_hairpinq; /**< Number of hairpin queues per port. */ 239 queueid_t nb_rxq = 1; /**< Number of RX queues per port. */ 240 queueid_t nb_txq = 1; /**< Number of TX queues per port. */ 241 242 /* 243 * Configurable number of RX/TX ring descriptors. 244 * Defaults are supplied by drivers via ethdev. 245 */ 246 #define RTE_TEST_RX_DESC_DEFAULT 0 247 #define RTE_TEST_TX_DESC_DEFAULT 0 248 uint16_t nb_rxd = RTE_TEST_RX_DESC_DEFAULT; /**< Number of RX descriptors. */ 249 uint16_t nb_txd = RTE_TEST_TX_DESC_DEFAULT; /**< Number of TX descriptors. */ 250 251 #define RTE_PMD_PARAM_UNSET -1 252 /* 253 * Configurable values of RX and TX ring threshold registers. 254 */ 255 256 int8_t rx_pthresh = RTE_PMD_PARAM_UNSET; 257 int8_t rx_hthresh = RTE_PMD_PARAM_UNSET; 258 int8_t rx_wthresh = RTE_PMD_PARAM_UNSET; 259 260 int8_t tx_pthresh = RTE_PMD_PARAM_UNSET; 261 int8_t tx_hthresh = RTE_PMD_PARAM_UNSET; 262 int8_t tx_wthresh = RTE_PMD_PARAM_UNSET; 263 264 /* 265 * Configurable value of RX free threshold. 266 */ 267 int16_t rx_free_thresh = RTE_PMD_PARAM_UNSET; 268 269 /* 270 * Configurable value of RX drop enable. 271 */ 272 int8_t rx_drop_en = RTE_PMD_PARAM_UNSET; 273 274 /* 275 * Configurable value of TX free threshold. 276 */ 277 int16_t tx_free_thresh = RTE_PMD_PARAM_UNSET; 278 279 /* 280 * Configurable value of TX RS bit threshold. 281 */ 282 int16_t tx_rs_thresh = RTE_PMD_PARAM_UNSET; 283 284 /* 285 * Configurable value of buffered packets before sending. 286 */ 287 uint16_t noisy_tx_sw_bufsz; 288 289 /* 290 * Configurable value of packet buffer timeout. 291 */ 292 uint16_t noisy_tx_sw_buf_flush_time; 293 294 /* 295 * Configurable value for size of VNF internal memory area 296 * used for simulating noisy neighbour behaviour 297 */ 298 uint64_t noisy_lkup_mem_sz; 299 300 /* 301 * Configurable value of number of random writes done in 302 * VNF simulation memory area. 303 */ 304 uint64_t noisy_lkup_num_writes; 305 306 /* 307 * Configurable value of number of random reads done in 308 * VNF simulation memory area. 309 */ 310 uint64_t noisy_lkup_num_reads; 311 312 /* 313 * Configurable value of number of random reads/writes done in 314 * VNF simulation memory area. 315 */ 316 uint64_t noisy_lkup_num_reads_writes; 317 318 /* 319 * Receive Side Scaling (RSS) configuration. 320 */ 321 uint64_t rss_hf = ETH_RSS_IP; /* RSS IP by default. */ 322 323 /* 324 * Port topology configuration 325 */ 326 uint16_t port_topology = PORT_TOPOLOGY_PAIRED; /* Ports are paired by default */ 327 328 /* 329 * Avoids to flush all the RX streams before starts forwarding. 330 */ 331 uint8_t no_flush_rx = 0; /* flush by default */ 332 333 /* 334 * Flow API isolated mode. 335 */ 336 uint8_t flow_isolate_all; 337 338 /* 339 * Avoids to check link status when starting/stopping a port. 340 */ 341 uint8_t no_link_check = 0; /* check by default */ 342 343 /* 344 * Don't automatically start all ports in interactive mode. 345 */ 346 uint8_t no_device_start = 0; 347 348 /* 349 * Enable link status change notification 350 */ 351 uint8_t lsc_interrupt = 1; /* enabled by default */ 352 353 /* 354 * Enable device removal notification. 355 */ 356 uint8_t rmv_interrupt = 1; /* enabled by default */ 357 358 uint8_t hot_plug = 0; /**< hotplug disabled by default. */ 359 360 /* After attach, port setup is called on event or by iterator */ 361 bool setup_on_probe_event = true; 362 363 /* Clear ptypes on port initialization. */ 364 uint8_t clear_ptypes = true; 365 366 /* Pretty printing of ethdev events */ 367 static const char * const eth_event_desc[] = { 368 [RTE_ETH_EVENT_UNKNOWN] = "unknown", 369 [RTE_ETH_EVENT_INTR_LSC] = "link state change", 370 [RTE_ETH_EVENT_QUEUE_STATE] = "queue state", 371 [RTE_ETH_EVENT_INTR_RESET] = "reset", 372 [RTE_ETH_EVENT_VF_MBOX] = "VF mbox", 373 [RTE_ETH_EVENT_IPSEC] = "IPsec", 374 [RTE_ETH_EVENT_MACSEC] = "MACsec", 375 [RTE_ETH_EVENT_INTR_RMV] = "device removal", 376 [RTE_ETH_EVENT_NEW] = "device probed", 377 [RTE_ETH_EVENT_DESTROY] = "device released", 378 [RTE_ETH_EVENT_MAX] = NULL, 379 }; 380 381 /* 382 * Display or mask ether events 383 * Default to all events except VF_MBOX 384 */ 385 uint32_t event_print_mask = (UINT32_C(1) << RTE_ETH_EVENT_UNKNOWN) | 386 (UINT32_C(1) << RTE_ETH_EVENT_INTR_LSC) | 387 (UINT32_C(1) << RTE_ETH_EVENT_QUEUE_STATE) | 388 (UINT32_C(1) << RTE_ETH_EVENT_INTR_RESET) | 389 (UINT32_C(1) << RTE_ETH_EVENT_IPSEC) | 390 (UINT32_C(1) << RTE_ETH_EVENT_MACSEC) | 391 (UINT32_C(1) << RTE_ETH_EVENT_INTR_RMV); 392 /* 393 * Decide if all memory are locked for performance. 394 */ 395 int do_mlockall = 0; 396 397 /* 398 * NIC bypass mode configuration options. 399 */ 400 401 #if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS 402 /* The NIC bypass watchdog timeout. */ 403 uint32_t bypass_timeout = RTE_PMD_IXGBE_BYPASS_TMT_OFF; 404 #endif 405 406 407 #ifdef RTE_LIBRTE_LATENCY_STATS 408 409 /* 410 * Set when latency stats is enabled in the commandline 411 */ 412 uint8_t latencystats_enabled; 413 414 /* 415 * Lcore ID to serive latency statistics. 416 */ 417 lcoreid_t latencystats_lcore_id = -1; 418 419 #endif 420 421 /* 422 * Ethernet device configuration. 423 */ 424 struct rte_eth_rxmode rx_mode = { 425 .max_rx_pkt_len = RTE_ETHER_MAX_LEN, 426 /**< Default maximum frame length. */ 427 }; 428 429 struct rte_eth_txmode tx_mode = { 430 .offloads = DEV_TX_OFFLOAD_MBUF_FAST_FREE, 431 }; 432 433 struct rte_fdir_conf fdir_conf = { 434 .mode = RTE_FDIR_MODE_NONE, 435 .pballoc = RTE_FDIR_PBALLOC_64K, 436 .status = RTE_FDIR_REPORT_STATUS, 437 .mask = { 438 .vlan_tci_mask = 0xFFEF, 439 .ipv4_mask = { 440 .src_ip = 0xFFFFFFFF, 441 .dst_ip = 0xFFFFFFFF, 442 }, 443 .ipv6_mask = { 444 .src_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF}, 445 .dst_ip = {0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF}, 446 }, 447 .src_port_mask = 0xFFFF, 448 .dst_port_mask = 0xFFFF, 449 .mac_addr_byte_mask = 0xFF, 450 .tunnel_type_mask = 1, 451 .tunnel_id_mask = 0xFFFFFFFF, 452 }, 453 .drop_queue = 127, 454 }; 455 456 volatile int test_done = 1; /* stop packet forwarding when set to 1. */ 457 458 struct queue_stats_mappings tx_queue_stats_mappings_array[MAX_TX_QUEUE_STATS_MAPPINGS]; 459 struct queue_stats_mappings rx_queue_stats_mappings_array[MAX_RX_QUEUE_STATS_MAPPINGS]; 460 461 struct queue_stats_mappings *tx_queue_stats_mappings = tx_queue_stats_mappings_array; 462 struct queue_stats_mappings *rx_queue_stats_mappings = rx_queue_stats_mappings_array; 463 464 uint16_t nb_tx_queue_stats_mappings = 0; 465 uint16_t nb_rx_queue_stats_mappings = 0; 466 467 /* 468 * Display zero values by default for xstats 469 */ 470 uint8_t xstats_hide_zero; 471 472 unsigned int num_sockets = 0; 473 unsigned int socket_ids[RTE_MAX_NUMA_NODES]; 474 475 #ifdef RTE_LIBRTE_BITRATE 476 /* Bitrate statistics */ 477 struct rte_stats_bitrates *bitrate_data; 478 lcoreid_t bitrate_lcore_id; 479 uint8_t bitrate_enabled; 480 #endif 481 482 struct gro_status gro_ports[RTE_MAX_ETHPORTS]; 483 uint8_t gro_flush_cycles = GRO_DEFAULT_FLUSH_CYCLES; 484 485 /* Forward function declarations */ 486 static void setup_attached_port(portid_t pi); 487 static void map_port_queue_stats_mapping_registers(portid_t pi, 488 struct rte_port *port); 489 static void check_all_ports_link_status(uint32_t port_mask); 490 static int eth_event_callback(portid_t port_id, 491 enum rte_eth_event_type type, 492 void *param, void *ret_param); 493 static void dev_event_callback(const char *device_name, 494 enum rte_dev_event_type type, 495 void *param); 496 497 /* 498 * Check if all the ports are started. 499 * If yes, return positive value. If not, return zero. 500 */ 501 static int all_ports_started(void); 502 503 struct gso_status gso_ports[RTE_MAX_ETHPORTS]; 504 uint16_t gso_max_segment_size = RTE_ETHER_MAX_LEN - RTE_ETHER_CRC_LEN; 505 506 /* Holds the registered mbuf dynamic flags names. */ 507 char dynf_names[64][RTE_MBUF_DYN_NAMESIZE]; 508 509 /* 510 * Helper function to check if socket is already discovered. 511 * If yes, return positive value. If not, return zero. 512 */ 513 int 514 new_socket_id(unsigned int socket_id) 515 { 516 unsigned int i; 517 518 for (i = 0; i < num_sockets; i++) { 519 if (socket_ids[i] == socket_id) 520 return 0; 521 } 522 return 1; 523 } 524 525 /* 526 * Setup default configuration. 527 */ 528 static void 529 set_default_fwd_lcores_config(void) 530 { 531 unsigned int i; 532 unsigned int nb_lc; 533 unsigned int sock_num; 534 535 nb_lc = 0; 536 for (i = 0; i < RTE_MAX_LCORE; i++) { 537 if (!rte_lcore_is_enabled(i)) 538 continue; 539 sock_num = rte_lcore_to_socket_id(i); 540 if (new_socket_id(sock_num)) { 541 if (num_sockets >= RTE_MAX_NUMA_NODES) { 542 rte_exit(EXIT_FAILURE, 543 "Total sockets greater than %u\n", 544 RTE_MAX_NUMA_NODES); 545 } 546 socket_ids[num_sockets++] = sock_num; 547 } 548 if (i == rte_get_master_lcore()) 549 continue; 550 fwd_lcores_cpuids[nb_lc++] = i; 551 } 552 nb_lcores = (lcoreid_t) nb_lc; 553 nb_cfg_lcores = nb_lcores; 554 nb_fwd_lcores = 1; 555 } 556 557 static void 558 set_def_peer_eth_addrs(void) 559 { 560 portid_t i; 561 562 for (i = 0; i < RTE_MAX_ETHPORTS; i++) { 563 peer_eth_addrs[i].addr_bytes[0] = RTE_ETHER_LOCAL_ADMIN_ADDR; 564 peer_eth_addrs[i].addr_bytes[5] = i; 565 } 566 } 567 568 static void 569 set_default_fwd_ports_config(void) 570 { 571 portid_t pt_id; 572 int i = 0; 573 574 RTE_ETH_FOREACH_DEV(pt_id) { 575 fwd_ports_ids[i++] = pt_id; 576 577 /* Update sockets info according to the attached device */ 578 int socket_id = rte_eth_dev_socket_id(pt_id); 579 if (socket_id >= 0 && new_socket_id(socket_id)) { 580 if (num_sockets >= RTE_MAX_NUMA_NODES) { 581 rte_exit(EXIT_FAILURE, 582 "Total sockets greater than %u\n", 583 RTE_MAX_NUMA_NODES); 584 } 585 socket_ids[num_sockets++] = socket_id; 586 } 587 } 588 589 nb_cfg_ports = nb_ports; 590 nb_fwd_ports = nb_ports; 591 } 592 593 void 594 set_def_fwd_config(void) 595 { 596 set_default_fwd_lcores_config(); 597 set_def_peer_eth_addrs(); 598 set_default_fwd_ports_config(); 599 } 600 601 /* extremely pessimistic estimation of memory required to create a mempool */ 602 static int 603 calc_mem_size(uint32_t nb_mbufs, uint32_t mbuf_sz, size_t pgsz, size_t *out) 604 { 605 unsigned int n_pages, mbuf_per_pg, leftover; 606 uint64_t total_mem, mbuf_mem, obj_sz; 607 608 /* there is no good way to predict how much space the mempool will 609 * occupy because it will allocate chunks on the fly, and some of those 610 * will come from default DPDK memory while some will come from our 611 * external memory, so just assume 128MB will be enough for everyone. 612 */ 613 uint64_t hdr_mem = 128 << 20; 614 615 /* account for possible non-contiguousness */ 616 obj_sz = rte_mempool_calc_obj_size(mbuf_sz, 0, NULL); 617 if (obj_sz > pgsz) { 618 TESTPMD_LOG(ERR, "Object size is bigger than page size\n"); 619 return -1; 620 } 621 622 mbuf_per_pg = pgsz / obj_sz; 623 leftover = (nb_mbufs % mbuf_per_pg) > 0; 624 n_pages = (nb_mbufs / mbuf_per_pg) + leftover; 625 626 mbuf_mem = n_pages * pgsz; 627 628 total_mem = RTE_ALIGN(hdr_mem + mbuf_mem, pgsz); 629 630 if (total_mem > SIZE_MAX) { 631 TESTPMD_LOG(ERR, "Memory size too big\n"); 632 return -1; 633 } 634 *out = (size_t)total_mem; 635 636 return 0; 637 } 638 639 static int 640 pagesz_flags(uint64_t page_sz) 641 { 642 /* as per mmap() manpage, all page sizes are log2 of page size 643 * shifted by MAP_HUGE_SHIFT 644 */ 645 int log2 = rte_log2_u64(page_sz); 646 647 return (log2 << HUGE_SHIFT); 648 } 649 650 static void * 651 alloc_mem(size_t memsz, size_t pgsz, bool huge) 652 { 653 void *addr; 654 int flags; 655 656 /* allocate anonymous hugepages */ 657 flags = MAP_ANONYMOUS | MAP_PRIVATE; 658 if (huge) 659 flags |= HUGE_FLAG | pagesz_flags(pgsz); 660 661 addr = mmap(NULL, memsz, PROT_READ | PROT_WRITE, flags, -1, 0); 662 if (addr == MAP_FAILED) 663 return NULL; 664 665 return addr; 666 } 667 668 struct extmem_param { 669 void *addr; 670 size_t len; 671 size_t pgsz; 672 rte_iova_t *iova_table; 673 unsigned int iova_table_len; 674 }; 675 676 static int 677 create_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, struct extmem_param *param, 678 bool huge) 679 { 680 uint64_t pgsizes[] = {RTE_PGSIZE_2M, RTE_PGSIZE_1G, /* x86_64, ARM */ 681 RTE_PGSIZE_16M, RTE_PGSIZE_16G}; /* POWER */ 682 unsigned int cur_page, n_pages, pgsz_idx; 683 size_t mem_sz, cur_pgsz; 684 rte_iova_t *iovas = NULL; 685 void *addr; 686 int ret; 687 688 for (pgsz_idx = 0; pgsz_idx < RTE_DIM(pgsizes); pgsz_idx++) { 689 /* skip anything that is too big */ 690 if (pgsizes[pgsz_idx] > SIZE_MAX) 691 continue; 692 693 cur_pgsz = pgsizes[pgsz_idx]; 694 695 /* if we were told not to allocate hugepages, override */ 696 if (!huge) 697 cur_pgsz = sysconf(_SC_PAGESIZE); 698 699 ret = calc_mem_size(nb_mbufs, mbuf_sz, cur_pgsz, &mem_sz); 700 if (ret < 0) { 701 TESTPMD_LOG(ERR, "Cannot calculate memory size\n"); 702 return -1; 703 } 704 705 /* allocate our memory */ 706 addr = alloc_mem(mem_sz, cur_pgsz, huge); 707 708 /* if we couldn't allocate memory with a specified page size, 709 * that doesn't mean we can't do it with other page sizes, so 710 * try another one. 711 */ 712 if (addr == NULL) 713 continue; 714 715 /* store IOVA addresses for every page in this memory area */ 716 n_pages = mem_sz / cur_pgsz; 717 718 iovas = malloc(sizeof(*iovas) * n_pages); 719 720 if (iovas == NULL) { 721 TESTPMD_LOG(ERR, "Cannot allocate memory for iova addresses\n"); 722 goto fail; 723 } 724 /* lock memory if it's not huge pages */ 725 if (!huge) 726 mlock(addr, mem_sz); 727 728 /* populate IOVA addresses */ 729 for (cur_page = 0; cur_page < n_pages; cur_page++) { 730 rte_iova_t iova; 731 size_t offset; 732 void *cur; 733 734 offset = cur_pgsz * cur_page; 735 cur = RTE_PTR_ADD(addr, offset); 736 737 /* touch the page before getting its IOVA */ 738 *(volatile char *)cur = 0; 739 740 iova = rte_mem_virt2iova(cur); 741 742 iovas[cur_page] = iova; 743 } 744 745 break; 746 } 747 /* if we couldn't allocate anything */ 748 if (iovas == NULL) 749 return -1; 750 751 param->addr = addr; 752 param->len = mem_sz; 753 param->pgsz = cur_pgsz; 754 param->iova_table = iovas; 755 param->iova_table_len = n_pages; 756 757 return 0; 758 fail: 759 if (iovas) 760 free(iovas); 761 if (addr) 762 munmap(addr, mem_sz); 763 764 return -1; 765 } 766 767 static int 768 setup_extmem(uint32_t nb_mbufs, uint32_t mbuf_sz, bool huge) 769 { 770 struct extmem_param param; 771 int socket_id, ret; 772 773 memset(¶m, 0, sizeof(param)); 774 775 /* check if our heap exists */ 776 socket_id = rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME); 777 if (socket_id < 0) { 778 /* create our heap */ 779 ret = rte_malloc_heap_create(EXTMEM_HEAP_NAME); 780 if (ret < 0) { 781 TESTPMD_LOG(ERR, "Cannot create heap\n"); 782 return -1; 783 } 784 } 785 786 ret = create_extmem(nb_mbufs, mbuf_sz, ¶m, huge); 787 if (ret < 0) { 788 TESTPMD_LOG(ERR, "Cannot create memory area\n"); 789 return -1; 790 } 791 792 /* we now have a valid memory area, so add it to heap */ 793 ret = rte_malloc_heap_memory_add(EXTMEM_HEAP_NAME, 794 param.addr, param.len, param.iova_table, 795 param.iova_table_len, param.pgsz); 796 797 /* when using VFIO, memory is automatically mapped for DMA by EAL */ 798 799 /* not needed any more */ 800 free(param.iova_table); 801 802 if (ret < 0) { 803 TESTPMD_LOG(ERR, "Cannot add memory to heap\n"); 804 munmap(param.addr, param.len); 805 return -1; 806 } 807 808 /* success */ 809 810 TESTPMD_LOG(DEBUG, "Allocated %zuMB of external memory\n", 811 param.len >> 20); 812 813 return 0; 814 } 815 static void 816 dma_unmap_cb(struct rte_mempool *mp __rte_unused, void *opaque __rte_unused, 817 struct rte_mempool_memhdr *memhdr, unsigned mem_idx __rte_unused) 818 { 819 uint16_t pid = 0; 820 int ret; 821 822 RTE_ETH_FOREACH_DEV(pid) { 823 struct rte_eth_dev *dev = 824 &rte_eth_devices[pid]; 825 826 ret = rte_dev_dma_unmap(dev->device, memhdr->addr, 0, 827 memhdr->len); 828 if (ret) { 829 TESTPMD_LOG(DEBUG, 830 "unable to DMA unmap addr 0x%p " 831 "for device %s\n", 832 memhdr->addr, dev->data->name); 833 } 834 } 835 ret = rte_extmem_unregister(memhdr->addr, memhdr->len); 836 if (ret) { 837 TESTPMD_LOG(DEBUG, 838 "unable to un-register addr 0x%p\n", memhdr->addr); 839 } 840 } 841 842 static void 843 dma_map_cb(struct rte_mempool *mp __rte_unused, void *opaque __rte_unused, 844 struct rte_mempool_memhdr *memhdr, unsigned mem_idx __rte_unused) 845 { 846 uint16_t pid = 0; 847 size_t page_size = sysconf(_SC_PAGESIZE); 848 int ret; 849 850 ret = rte_extmem_register(memhdr->addr, memhdr->len, NULL, 0, 851 page_size); 852 if (ret) { 853 TESTPMD_LOG(DEBUG, 854 "unable to register addr 0x%p\n", memhdr->addr); 855 return; 856 } 857 RTE_ETH_FOREACH_DEV(pid) { 858 struct rte_eth_dev *dev = 859 &rte_eth_devices[pid]; 860 861 ret = rte_dev_dma_map(dev->device, memhdr->addr, 0, 862 memhdr->len); 863 if (ret) { 864 TESTPMD_LOG(DEBUG, 865 "unable to DMA map addr 0x%p " 866 "for device %s\n", 867 memhdr->addr, dev->data->name); 868 } 869 } 870 } 871 872 static unsigned int 873 setup_extbuf(uint32_t nb_mbufs, uint16_t mbuf_sz, unsigned int socket_id, 874 char *pool_name, struct rte_pktmbuf_extmem **ext_mem) 875 { 876 struct rte_pktmbuf_extmem *xmem; 877 unsigned int ext_num, zone_num, elt_num; 878 uint16_t elt_size; 879 880 elt_size = RTE_ALIGN_CEIL(mbuf_sz, RTE_CACHE_LINE_SIZE); 881 elt_num = EXTBUF_ZONE_SIZE / elt_size; 882 zone_num = (nb_mbufs + elt_num - 1) / elt_num; 883 884 xmem = malloc(sizeof(struct rte_pktmbuf_extmem) * zone_num); 885 if (xmem == NULL) { 886 TESTPMD_LOG(ERR, "Cannot allocate memory for " 887 "external buffer descriptors\n"); 888 *ext_mem = NULL; 889 return 0; 890 } 891 for (ext_num = 0; ext_num < zone_num; ext_num++) { 892 struct rte_pktmbuf_extmem *xseg = xmem + ext_num; 893 const struct rte_memzone *mz; 894 char mz_name[RTE_MEMZONE_NAMESIZE]; 895 int ret; 896 897 ret = snprintf(mz_name, sizeof(mz_name), 898 RTE_MEMPOOL_MZ_FORMAT "_xb_%u", pool_name, ext_num); 899 if (ret < 0 || ret >= (int)sizeof(mz_name)) { 900 errno = ENAMETOOLONG; 901 ext_num = 0; 902 break; 903 } 904 mz = rte_memzone_reserve_aligned(mz_name, EXTBUF_ZONE_SIZE, 905 socket_id, 906 RTE_MEMZONE_IOVA_CONTIG | 907 RTE_MEMZONE_1GB | 908 RTE_MEMZONE_SIZE_HINT_ONLY, 909 EXTBUF_ZONE_SIZE); 910 if (mz == NULL) { 911 /* 912 * The caller exits on external buffer creation 913 * error, so there is no need to free memzones. 914 */ 915 errno = ENOMEM; 916 ext_num = 0; 917 break; 918 } 919 xseg->buf_ptr = mz->addr; 920 xseg->buf_iova = mz->iova; 921 xseg->buf_len = EXTBUF_ZONE_SIZE; 922 xseg->elt_size = elt_size; 923 } 924 if (ext_num == 0 && xmem != NULL) { 925 free(xmem); 926 xmem = NULL; 927 } 928 *ext_mem = xmem; 929 return ext_num; 930 } 931 932 /* 933 * Configuration initialisation done once at init time. 934 */ 935 static struct rte_mempool * 936 mbuf_pool_create(uint16_t mbuf_seg_size, unsigned nb_mbuf, 937 unsigned int socket_id) 938 { 939 char pool_name[RTE_MEMPOOL_NAMESIZE]; 940 struct rte_mempool *rte_mp = NULL; 941 uint32_t mb_size; 942 943 mb_size = sizeof(struct rte_mbuf) + mbuf_seg_size; 944 mbuf_poolname_build(socket_id, pool_name, sizeof(pool_name)); 945 946 TESTPMD_LOG(INFO, 947 "create a new mbuf pool <%s>: n=%u, size=%u, socket=%u\n", 948 pool_name, nb_mbuf, mbuf_seg_size, socket_id); 949 950 switch (mp_alloc_type) { 951 case MP_ALLOC_NATIVE: 952 { 953 /* wrapper to rte_mempool_create() */ 954 TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n", 955 rte_mbuf_best_mempool_ops()); 956 rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf, 957 mb_mempool_cache, 0, mbuf_seg_size, socket_id); 958 break; 959 } 960 case MP_ALLOC_ANON: 961 { 962 rte_mp = rte_mempool_create_empty(pool_name, nb_mbuf, 963 mb_size, (unsigned int) mb_mempool_cache, 964 sizeof(struct rte_pktmbuf_pool_private), 965 socket_id, mempool_flags); 966 if (rte_mp == NULL) 967 goto err; 968 969 if (rte_mempool_populate_anon(rte_mp) == 0) { 970 rte_mempool_free(rte_mp); 971 rte_mp = NULL; 972 goto err; 973 } 974 rte_pktmbuf_pool_init(rte_mp, NULL); 975 rte_mempool_obj_iter(rte_mp, rte_pktmbuf_init, NULL); 976 rte_mempool_mem_iter(rte_mp, dma_map_cb, NULL); 977 break; 978 } 979 case MP_ALLOC_XMEM: 980 case MP_ALLOC_XMEM_HUGE: 981 { 982 int heap_socket; 983 bool huge = mp_alloc_type == MP_ALLOC_XMEM_HUGE; 984 985 if (setup_extmem(nb_mbuf, mbuf_seg_size, huge) < 0) 986 rte_exit(EXIT_FAILURE, "Could not create external memory\n"); 987 988 heap_socket = 989 rte_malloc_heap_get_socket(EXTMEM_HEAP_NAME); 990 if (heap_socket < 0) 991 rte_exit(EXIT_FAILURE, "Could not get external memory socket ID\n"); 992 993 TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n", 994 rte_mbuf_best_mempool_ops()); 995 rte_mp = rte_pktmbuf_pool_create(pool_name, nb_mbuf, 996 mb_mempool_cache, 0, mbuf_seg_size, 997 heap_socket); 998 break; 999 } 1000 case MP_ALLOC_XBUF: 1001 { 1002 struct rte_pktmbuf_extmem *ext_mem; 1003 unsigned int ext_num; 1004 1005 ext_num = setup_extbuf(nb_mbuf, mbuf_seg_size, 1006 socket_id, pool_name, &ext_mem); 1007 if (ext_num == 0) 1008 rte_exit(EXIT_FAILURE, 1009 "Can't create pinned data buffers\n"); 1010 1011 TESTPMD_LOG(INFO, "preferred mempool ops selected: %s\n", 1012 rte_mbuf_best_mempool_ops()); 1013 rte_mp = rte_pktmbuf_pool_create_extbuf 1014 (pool_name, nb_mbuf, mb_mempool_cache, 1015 0, mbuf_seg_size, socket_id, 1016 ext_mem, ext_num); 1017 free(ext_mem); 1018 break; 1019 } 1020 default: 1021 { 1022 rte_exit(EXIT_FAILURE, "Invalid mempool creation mode\n"); 1023 } 1024 } 1025 1026 err: 1027 if (rte_mp == NULL) { 1028 rte_exit(EXIT_FAILURE, 1029 "Creation of mbuf pool for socket %u failed: %s\n", 1030 socket_id, rte_strerror(rte_errno)); 1031 } else if (verbose_level > 0) { 1032 rte_mempool_dump(stdout, rte_mp); 1033 } 1034 return rte_mp; 1035 } 1036 1037 /* 1038 * Check given socket id is valid or not with NUMA mode, 1039 * if valid, return 0, else return -1 1040 */ 1041 static int 1042 check_socket_id(const unsigned int socket_id) 1043 { 1044 static int warning_once = 0; 1045 1046 if (new_socket_id(socket_id)) { 1047 if (!warning_once && numa_support) 1048 printf("Warning: NUMA should be configured manually by" 1049 " using --port-numa-config and" 1050 " --ring-numa-config parameters along with" 1051 " --numa.\n"); 1052 warning_once = 1; 1053 return -1; 1054 } 1055 return 0; 1056 } 1057 1058 /* 1059 * Get the allowed maximum number of RX queues. 1060 * *pid return the port id which has minimal value of 1061 * max_rx_queues in all ports. 1062 */ 1063 queueid_t 1064 get_allowed_max_nb_rxq(portid_t *pid) 1065 { 1066 queueid_t allowed_max_rxq = RTE_MAX_QUEUES_PER_PORT; 1067 bool max_rxq_valid = false; 1068 portid_t pi; 1069 struct rte_eth_dev_info dev_info; 1070 1071 RTE_ETH_FOREACH_DEV(pi) { 1072 if (eth_dev_info_get_print_err(pi, &dev_info) != 0) 1073 continue; 1074 1075 max_rxq_valid = true; 1076 if (dev_info.max_rx_queues < allowed_max_rxq) { 1077 allowed_max_rxq = dev_info.max_rx_queues; 1078 *pid = pi; 1079 } 1080 } 1081 return max_rxq_valid ? allowed_max_rxq : 0; 1082 } 1083 1084 /* 1085 * Check input rxq is valid or not. 1086 * If input rxq is not greater than any of maximum number 1087 * of RX queues of all ports, it is valid. 1088 * if valid, return 0, else return -1 1089 */ 1090 int 1091 check_nb_rxq(queueid_t rxq) 1092 { 1093 queueid_t allowed_max_rxq; 1094 portid_t pid = 0; 1095 1096 allowed_max_rxq = get_allowed_max_nb_rxq(&pid); 1097 if (rxq > allowed_max_rxq) { 1098 printf("Fail: input rxq (%u) can't be greater " 1099 "than max_rx_queues (%u) of port %u\n", 1100 rxq, 1101 allowed_max_rxq, 1102 pid); 1103 return -1; 1104 } 1105 return 0; 1106 } 1107 1108 /* 1109 * Get the allowed maximum number of TX queues. 1110 * *pid return the port id which has minimal value of 1111 * max_tx_queues in all ports. 1112 */ 1113 queueid_t 1114 get_allowed_max_nb_txq(portid_t *pid) 1115 { 1116 queueid_t allowed_max_txq = RTE_MAX_QUEUES_PER_PORT; 1117 bool max_txq_valid = false; 1118 portid_t pi; 1119 struct rte_eth_dev_info dev_info; 1120 1121 RTE_ETH_FOREACH_DEV(pi) { 1122 if (eth_dev_info_get_print_err(pi, &dev_info) != 0) 1123 continue; 1124 1125 max_txq_valid = true; 1126 if (dev_info.max_tx_queues < allowed_max_txq) { 1127 allowed_max_txq = dev_info.max_tx_queues; 1128 *pid = pi; 1129 } 1130 } 1131 return max_txq_valid ? allowed_max_txq : 0; 1132 } 1133 1134 /* 1135 * Check input txq is valid or not. 1136 * If input txq is not greater than any of maximum number 1137 * of TX queues of all ports, it is valid. 1138 * if valid, return 0, else return -1 1139 */ 1140 int 1141 check_nb_txq(queueid_t txq) 1142 { 1143 queueid_t allowed_max_txq; 1144 portid_t pid = 0; 1145 1146 allowed_max_txq = get_allowed_max_nb_txq(&pid); 1147 if (txq > allowed_max_txq) { 1148 printf("Fail: input txq (%u) can't be greater " 1149 "than max_tx_queues (%u) of port %u\n", 1150 txq, 1151 allowed_max_txq, 1152 pid); 1153 return -1; 1154 } 1155 return 0; 1156 } 1157 1158 /* 1159 * Get the allowed maximum number of hairpin queues. 1160 * *pid return the port id which has minimal value of 1161 * max_hairpin_queues in all ports. 1162 */ 1163 queueid_t 1164 get_allowed_max_nb_hairpinq(portid_t *pid) 1165 { 1166 queueid_t allowed_max_hairpinq = RTE_MAX_QUEUES_PER_PORT; 1167 portid_t pi; 1168 struct rte_eth_hairpin_cap cap; 1169 1170 RTE_ETH_FOREACH_DEV(pi) { 1171 if (rte_eth_dev_hairpin_capability_get(pi, &cap) != 0) { 1172 *pid = pi; 1173 return 0; 1174 } 1175 if (cap.max_nb_queues < allowed_max_hairpinq) { 1176 allowed_max_hairpinq = cap.max_nb_queues; 1177 *pid = pi; 1178 } 1179 } 1180 return allowed_max_hairpinq; 1181 } 1182 1183 /* 1184 * Check input hairpin is valid or not. 1185 * If input hairpin is not greater than any of maximum number 1186 * of hairpin queues of all ports, it is valid. 1187 * if valid, return 0, else return -1 1188 */ 1189 int 1190 check_nb_hairpinq(queueid_t hairpinq) 1191 { 1192 queueid_t allowed_max_hairpinq; 1193 portid_t pid = 0; 1194 1195 allowed_max_hairpinq = get_allowed_max_nb_hairpinq(&pid); 1196 if (hairpinq > allowed_max_hairpinq) { 1197 printf("Fail: input hairpin (%u) can't be greater " 1198 "than max_hairpin_queues (%u) of port %u\n", 1199 hairpinq, allowed_max_hairpinq, pid); 1200 return -1; 1201 } 1202 return 0; 1203 } 1204 1205 static void 1206 init_config(void) 1207 { 1208 portid_t pid; 1209 struct rte_port *port; 1210 struct rte_mempool *mbp; 1211 unsigned int nb_mbuf_per_pool; 1212 lcoreid_t lc_id; 1213 uint8_t port_per_socket[RTE_MAX_NUMA_NODES]; 1214 struct rte_gro_param gro_param; 1215 uint32_t gso_types; 1216 uint16_t data_size; 1217 bool warning = 0; 1218 int k; 1219 int ret; 1220 1221 memset(port_per_socket,0,RTE_MAX_NUMA_NODES); 1222 1223 /* Configuration of logical cores. */ 1224 fwd_lcores = rte_zmalloc("testpmd: fwd_lcores", 1225 sizeof(struct fwd_lcore *) * nb_lcores, 1226 RTE_CACHE_LINE_SIZE); 1227 if (fwd_lcores == NULL) { 1228 rte_exit(EXIT_FAILURE, "rte_zmalloc(%d (struct fwd_lcore *)) " 1229 "failed\n", nb_lcores); 1230 } 1231 for (lc_id = 0; lc_id < nb_lcores; lc_id++) { 1232 fwd_lcores[lc_id] = rte_zmalloc("testpmd: struct fwd_lcore", 1233 sizeof(struct fwd_lcore), 1234 RTE_CACHE_LINE_SIZE); 1235 if (fwd_lcores[lc_id] == NULL) { 1236 rte_exit(EXIT_FAILURE, "rte_zmalloc(struct fwd_lcore) " 1237 "failed\n"); 1238 } 1239 fwd_lcores[lc_id]->cpuid_idx = lc_id; 1240 } 1241 1242 RTE_ETH_FOREACH_DEV(pid) { 1243 port = &ports[pid]; 1244 /* Apply default TxRx configuration for all ports */ 1245 port->dev_conf.txmode = tx_mode; 1246 port->dev_conf.rxmode = rx_mode; 1247 1248 ret = eth_dev_info_get_print_err(pid, &port->dev_info); 1249 if (ret != 0) 1250 rte_exit(EXIT_FAILURE, 1251 "rte_eth_dev_info_get() failed\n"); 1252 1253 if (!(port->dev_info.tx_offload_capa & 1254 DEV_TX_OFFLOAD_MBUF_FAST_FREE)) 1255 port->dev_conf.txmode.offloads &= 1256 ~DEV_TX_OFFLOAD_MBUF_FAST_FREE; 1257 if (numa_support) { 1258 if (port_numa[pid] != NUMA_NO_CONFIG) 1259 port_per_socket[port_numa[pid]]++; 1260 else { 1261 uint32_t socket_id = rte_eth_dev_socket_id(pid); 1262 1263 /* 1264 * if socket_id is invalid, 1265 * set to the first available socket. 1266 */ 1267 if (check_socket_id(socket_id) < 0) 1268 socket_id = socket_ids[0]; 1269 port_per_socket[socket_id]++; 1270 } 1271 } 1272 1273 /* Apply Rx offloads configuration */ 1274 for (k = 0; k < port->dev_info.max_rx_queues; k++) 1275 port->rx_conf[k].offloads = 1276 port->dev_conf.rxmode.offloads; 1277 /* Apply Tx offloads configuration */ 1278 for (k = 0; k < port->dev_info.max_tx_queues; k++) 1279 port->tx_conf[k].offloads = 1280 port->dev_conf.txmode.offloads; 1281 1282 /* set flag to initialize port/queue */ 1283 port->need_reconfig = 1; 1284 port->need_reconfig_queues = 1; 1285 port->tx_metadata = 0; 1286 1287 /* Check for maximum number of segments per MTU. Accordingly 1288 * update the mbuf data size. 1289 */ 1290 if (port->dev_info.rx_desc_lim.nb_mtu_seg_max != UINT16_MAX && 1291 port->dev_info.rx_desc_lim.nb_mtu_seg_max != 0) { 1292 data_size = rx_mode.max_rx_pkt_len / 1293 port->dev_info.rx_desc_lim.nb_mtu_seg_max; 1294 1295 if ((data_size + RTE_PKTMBUF_HEADROOM) > 1296 mbuf_data_size) { 1297 mbuf_data_size = data_size + 1298 RTE_PKTMBUF_HEADROOM; 1299 warning = 1; 1300 } 1301 } 1302 } 1303 1304 if (warning) 1305 TESTPMD_LOG(WARNING, "Configured mbuf size %hu\n", 1306 mbuf_data_size); 1307 1308 /* 1309 * Create pools of mbuf. 1310 * If NUMA support is disabled, create a single pool of mbuf in 1311 * socket 0 memory by default. 1312 * Otherwise, create a pool of mbuf in the memory of sockets 0 and 1. 1313 * 1314 * Use the maximum value of nb_rxd and nb_txd here, then nb_rxd and 1315 * nb_txd can be configured at run time. 1316 */ 1317 if (param_total_num_mbufs) 1318 nb_mbuf_per_pool = param_total_num_mbufs; 1319 else { 1320 nb_mbuf_per_pool = RTE_TEST_RX_DESC_MAX + 1321 (nb_lcores * mb_mempool_cache) + 1322 RTE_TEST_TX_DESC_MAX + MAX_PKT_BURST; 1323 nb_mbuf_per_pool *= RTE_MAX_ETHPORTS; 1324 } 1325 1326 if (numa_support) { 1327 uint8_t i; 1328 1329 for (i = 0; i < num_sockets; i++) 1330 mempools[i] = mbuf_pool_create(mbuf_data_size, 1331 nb_mbuf_per_pool, 1332 socket_ids[i]); 1333 } else { 1334 if (socket_num == UMA_NO_CONFIG) 1335 mempools[0] = mbuf_pool_create(mbuf_data_size, 1336 nb_mbuf_per_pool, 0); 1337 else 1338 mempools[socket_num] = mbuf_pool_create 1339 (mbuf_data_size, 1340 nb_mbuf_per_pool, 1341 socket_num); 1342 } 1343 1344 init_port_config(); 1345 1346 gso_types = DEV_TX_OFFLOAD_TCP_TSO | DEV_TX_OFFLOAD_VXLAN_TNL_TSO | 1347 DEV_TX_OFFLOAD_GRE_TNL_TSO | DEV_TX_OFFLOAD_UDP_TSO; 1348 /* 1349 * Records which Mbuf pool to use by each logical core, if needed. 1350 */ 1351 for (lc_id = 0; lc_id < nb_lcores; lc_id++) { 1352 mbp = mbuf_pool_find( 1353 rte_lcore_to_socket_id(fwd_lcores_cpuids[lc_id])); 1354 1355 if (mbp == NULL) 1356 mbp = mbuf_pool_find(0); 1357 fwd_lcores[lc_id]->mbp = mbp; 1358 /* initialize GSO context */ 1359 fwd_lcores[lc_id]->gso_ctx.direct_pool = mbp; 1360 fwd_lcores[lc_id]->gso_ctx.indirect_pool = mbp; 1361 fwd_lcores[lc_id]->gso_ctx.gso_types = gso_types; 1362 fwd_lcores[lc_id]->gso_ctx.gso_size = RTE_ETHER_MAX_LEN - 1363 RTE_ETHER_CRC_LEN; 1364 fwd_lcores[lc_id]->gso_ctx.flag = 0; 1365 } 1366 1367 /* Configuration of packet forwarding streams. */ 1368 if (init_fwd_streams() < 0) 1369 rte_exit(EXIT_FAILURE, "FAIL from init_fwd_streams()\n"); 1370 1371 fwd_config_setup(); 1372 1373 /* create a gro context for each lcore */ 1374 gro_param.gro_types = RTE_GRO_TCP_IPV4; 1375 gro_param.max_flow_num = GRO_MAX_FLUSH_CYCLES; 1376 gro_param.max_item_per_flow = MAX_PKT_BURST; 1377 for (lc_id = 0; lc_id < nb_lcores; lc_id++) { 1378 gro_param.socket_id = rte_lcore_to_socket_id( 1379 fwd_lcores_cpuids[lc_id]); 1380 fwd_lcores[lc_id]->gro_ctx = rte_gro_ctx_create(&gro_param); 1381 if (fwd_lcores[lc_id]->gro_ctx == NULL) { 1382 rte_exit(EXIT_FAILURE, 1383 "rte_gro_ctx_create() failed\n"); 1384 } 1385 } 1386 1387 #if defined RTE_LIBRTE_PMD_SOFTNIC 1388 if (strcmp(cur_fwd_eng->fwd_mode_name, "softnic") == 0) { 1389 RTE_ETH_FOREACH_DEV(pid) { 1390 port = &ports[pid]; 1391 const char *driver = port->dev_info.driver_name; 1392 1393 if (strcmp(driver, "net_softnic") == 0) 1394 port->softport.fwd_lcore_arg = fwd_lcores; 1395 } 1396 } 1397 #endif 1398 1399 } 1400 1401 1402 void 1403 reconfig(portid_t new_port_id, unsigned socket_id) 1404 { 1405 struct rte_port *port; 1406 int ret; 1407 1408 /* Reconfiguration of Ethernet ports. */ 1409 port = &ports[new_port_id]; 1410 1411 ret = eth_dev_info_get_print_err(new_port_id, &port->dev_info); 1412 if (ret != 0) 1413 return; 1414 1415 /* set flag to initialize port/queue */ 1416 port->need_reconfig = 1; 1417 port->need_reconfig_queues = 1; 1418 port->socket_id = socket_id; 1419 1420 init_port_config(); 1421 } 1422 1423 1424 int 1425 init_fwd_streams(void) 1426 { 1427 portid_t pid; 1428 struct rte_port *port; 1429 streamid_t sm_id, nb_fwd_streams_new; 1430 queueid_t q; 1431 1432 /* set socket id according to numa or not */ 1433 RTE_ETH_FOREACH_DEV(pid) { 1434 port = &ports[pid]; 1435 if (nb_rxq > port->dev_info.max_rx_queues) { 1436 printf("Fail: nb_rxq(%d) is greater than " 1437 "max_rx_queues(%d)\n", nb_rxq, 1438 port->dev_info.max_rx_queues); 1439 return -1; 1440 } 1441 if (nb_txq > port->dev_info.max_tx_queues) { 1442 printf("Fail: nb_txq(%d) is greater than " 1443 "max_tx_queues(%d)\n", nb_txq, 1444 port->dev_info.max_tx_queues); 1445 return -1; 1446 } 1447 if (numa_support) { 1448 if (port_numa[pid] != NUMA_NO_CONFIG) 1449 port->socket_id = port_numa[pid]; 1450 else { 1451 port->socket_id = rte_eth_dev_socket_id(pid); 1452 1453 /* 1454 * if socket_id is invalid, 1455 * set to the first available socket. 1456 */ 1457 if (check_socket_id(port->socket_id) < 0) 1458 port->socket_id = socket_ids[0]; 1459 } 1460 } 1461 else { 1462 if (socket_num == UMA_NO_CONFIG) 1463 port->socket_id = 0; 1464 else 1465 port->socket_id = socket_num; 1466 } 1467 } 1468 1469 q = RTE_MAX(nb_rxq, nb_txq); 1470 if (q == 0) { 1471 printf("Fail: Cannot allocate fwd streams as number of queues is 0\n"); 1472 return -1; 1473 } 1474 nb_fwd_streams_new = (streamid_t)(nb_ports * q); 1475 if (nb_fwd_streams_new == nb_fwd_streams) 1476 return 0; 1477 /* clear the old */ 1478 if (fwd_streams != NULL) { 1479 for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) { 1480 if (fwd_streams[sm_id] == NULL) 1481 continue; 1482 rte_free(fwd_streams[sm_id]); 1483 fwd_streams[sm_id] = NULL; 1484 } 1485 rte_free(fwd_streams); 1486 fwd_streams = NULL; 1487 } 1488 1489 /* init new */ 1490 nb_fwd_streams = nb_fwd_streams_new; 1491 if (nb_fwd_streams) { 1492 fwd_streams = rte_zmalloc("testpmd: fwd_streams", 1493 sizeof(struct fwd_stream *) * nb_fwd_streams, 1494 RTE_CACHE_LINE_SIZE); 1495 if (fwd_streams == NULL) 1496 rte_exit(EXIT_FAILURE, "rte_zmalloc(%d" 1497 " (struct fwd_stream *)) failed\n", 1498 nb_fwd_streams); 1499 1500 for (sm_id = 0; sm_id < nb_fwd_streams; sm_id++) { 1501 fwd_streams[sm_id] = rte_zmalloc("testpmd:" 1502 " struct fwd_stream", sizeof(struct fwd_stream), 1503 RTE_CACHE_LINE_SIZE); 1504 if (fwd_streams[sm_id] == NULL) 1505 rte_exit(EXIT_FAILURE, "rte_zmalloc" 1506 "(struct fwd_stream) failed\n"); 1507 } 1508 } 1509 1510 return 0; 1511 } 1512 1513 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS 1514 static void 1515 pkt_burst_stats_display(const char *rx_tx, struct pkt_burst_stats *pbs) 1516 { 1517 unsigned int total_burst; 1518 unsigned int nb_burst; 1519 unsigned int burst_stats[3]; 1520 uint16_t pktnb_stats[3]; 1521 uint16_t nb_pkt; 1522 int burst_percent[3]; 1523 1524 /* 1525 * First compute the total number of packet bursts and the 1526 * two highest numbers of bursts of the same number of packets. 1527 */ 1528 total_burst = 0; 1529 burst_stats[0] = burst_stats[1] = burst_stats[2] = 0; 1530 pktnb_stats[0] = pktnb_stats[1] = pktnb_stats[2] = 0; 1531 for (nb_pkt = 0; nb_pkt < MAX_PKT_BURST; nb_pkt++) { 1532 nb_burst = pbs->pkt_burst_spread[nb_pkt]; 1533 if (nb_burst == 0) 1534 continue; 1535 total_burst += nb_burst; 1536 if (nb_burst > burst_stats[0]) { 1537 burst_stats[1] = burst_stats[0]; 1538 pktnb_stats[1] = pktnb_stats[0]; 1539 burst_stats[0] = nb_burst; 1540 pktnb_stats[0] = nb_pkt; 1541 } else if (nb_burst > burst_stats[1]) { 1542 burst_stats[1] = nb_burst; 1543 pktnb_stats[1] = nb_pkt; 1544 } 1545 } 1546 if (total_burst == 0) 1547 return; 1548 burst_percent[0] = (burst_stats[0] * 100) / total_burst; 1549 printf(" %s-bursts : %u [%d%% of %d pkts", rx_tx, total_burst, 1550 burst_percent[0], (int) pktnb_stats[0]); 1551 if (burst_stats[0] == total_burst) { 1552 printf("]\n"); 1553 return; 1554 } 1555 if (burst_stats[0] + burst_stats[1] == total_burst) { 1556 printf(" + %d%% of %d pkts]\n", 1557 100 - burst_percent[0], pktnb_stats[1]); 1558 return; 1559 } 1560 burst_percent[1] = (burst_stats[1] * 100) / total_burst; 1561 burst_percent[2] = 100 - (burst_percent[0] + burst_percent[1]); 1562 if ((burst_percent[1] == 0) || (burst_percent[2] == 0)) { 1563 printf(" + %d%% of others]\n", 100 - burst_percent[0]); 1564 return; 1565 } 1566 printf(" + %d%% of %d pkts + %d%% of others]\n", 1567 burst_percent[1], (int) pktnb_stats[1], burst_percent[2]); 1568 } 1569 #endif /* RTE_TEST_PMD_RECORD_BURST_STATS */ 1570 1571 static void 1572 fwd_stream_stats_display(streamid_t stream_id) 1573 { 1574 struct fwd_stream *fs; 1575 static const char *fwd_top_stats_border = "-------"; 1576 1577 fs = fwd_streams[stream_id]; 1578 if ((fs->rx_packets == 0) && (fs->tx_packets == 0) && 1579 (fs->fwd_dropped == 0)) 1580 return; 1581 printf("\n %s Forward Stats for RX Port=%2d/Queue=%2d -> " 1582 "TX Port=%2d/Queue=%2d %s\n", 1583 fwd_top_stats_border, fs->rx_port, fs->rx_queue, 1584 fs->tx_port, fs->tx_queue, fwd_top_stats_border); 1585 printf(" RX-packets: %-14"PRIu64" TX-packets: %-14"PRIu64 1586 " TX-dropped: %-14"PRIu64, 1587 fs->rx_packets, fs->tx_packets, fs->fwd_dropped); 1588 1589 /* if checksum mode */ 1590 if (cur_fwd_eng == &csum_fwd_engine) { 1591 printf(" RX- bad IP checksum: %-14"PRIu64 1592 " Rx- bad L4 checksum: %-14"PRIu64 1593 " Rx- bad outer L4 checksum: %-14"PRIu64"\n", 1594 fs->rx_bad_ip_csum, fs->rx_bad_l4_csum, 1595 fs->rx_bad_outer_l4_csum); 1596 } else { 1597 printf("\n"); 1598 } 1599 1600 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS 1601 pkt_burst_stats_display("RX", &fs->rx_burst_stats); 1602 pkt_burst_stats_display("TX", &fs->tx_burst_stats); 1603 #endif 1604 } 1605 1606 void 1607 fwd_stats_display(void) 1608 { 1609 static const char *fwd_stats_border = "----------------------"; 1610 static const char *acc_stats_border = "+++++++++++++++"; 1611 struct { 1612 struct fwd_stream *rx_stream; 1613 struct fwd_stream *tx_stream; 1614 uint64_t tx_dropped; 1615 uint64_t rx_bad_ip_csum; 1616 uint64_t rx_bad_l4_csum; 1617 uint64_t rx_bad_outer_l4_csum; 1618 } ports_stats[RTE_MAX_ETHPORTS]; 1619 uint64_t total_rx_dropped = 0; 1620 uint64_t total_tx_dropped = 0; 1621 uint64_t total_rx_nombuf = 0; 1622 struct rte_eth_stats stats; 1623 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES 1624 uint64_t fwd_cycles = 0; 1625 #endif 1626 uint64_t total_recv = 0; 1627 uint64_t total_xmit = 0; 1628 struct rte_port *port; 1629 streamid_t sm_id; 1630 portid_t pt_id; 1631 int i; 1632 1633 memset(ports_stats, 0, sizeof(ports_stats)); 1634 1635 for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) { 1636 struct fwd_stream *fs = fwd_streams[sm_id]; 1637 1638 if (cur_fwd_config.nb_fwd_streams > 1639 cur_fwd_config.nb_fwd_ports) { 1640 fwd_stream_stats_display(sm_id); 1641 } else { 1642 ports_stats[fs->tx_port].tx_stream = fs; 1643 ports_stats[fs->rx_port].rx_stream = fs; 1644 } 1645 1646 ports_stats[fs->tx_port].tx_dropped += fs->fwd_dropped; 1647 1648 ports_stats[fs->rx_port].rx_bad_ip_csum += fs->rx_bad_ip_csum; 1649 ports_stats[fs->rx_port].rx_bad_l4_csum += fs->rx_bad_l4_csum; 1650 ports_stats[fs->rx_port].rx_bad_outer_l4_csum += 1651 fs->rx_bad_outer_l4_csum; 1652 1653 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES 1654 fwd_cycles += fs->core_cycles; 1655 #endif 1656 } 1657 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) { 1658 uint8_t j; 1659 1660 pt_id = fwd_ports_ids[i]; 1661 port = &ports[pt_id]; 1662 1663 rte_eth_stats_get(pt_id, &stats); 1664 stats.ipackets -= port->stats.ipackets; 1665 stats.opackets -= port->stats.opackets; 1666 stats.ibytes -= port->stats.ibytes; 1667 stats.obytes -= port->stats.obytes; 1668 stats.imissed -= port->stats.imissed; 1669 stats.oerrors -= port->stats.oerrors; 1670 stats.rx_nombuf -= port->stats.rx_nombuf; 1671 1672 total_recv += stats.ipackets; 1673 total_xmit += stats.opackets; 1674 total_rx_dropped += stats.imissed; 1675 total_tx_dropped += ports_stats[pt_id].tx_dropped; 1676 total_tx_dropped += stats.oerrors; 1677 total_rx_nombuf += stats.rx_nombuf; 1678 1679 printf("\n %s Forward statistics for port %-2d %s\n", 1680 fwd_stats_border, pt_id, fwd_stats_border); 1681 1682 if (!port->rx_queue_stats_mapping_enabled && 1683 !port->tx_queue_stats_mapping_enabled) { 1684 printf(" RX-packets: %-14"PRIu64 1685 " RX-dropped: %-14"PRIu64 1686 "RX-total: %-"PRIu64"\n", 1687 stats.ipackets, stats.imissed, 1688 stats.ipackets + stats.imissed); 1689 1690 if (cur_fwd_eng == &csum_fwd_engine) 1691 printf(" Bad-ipcsum: %-14"PRIu64 1692 " Bad-l4csum: %-14"PRIu64 1693 "Bad-outer-l4csum: %-14"PRIu64"\n", 1694 ports_stats[pt_id].rx_bad_ip_csum, 1695 ports_stats[pt_id].rx_bad_l4_csum, 1696 ports_stats[pt_id].rx_bad_outer_l4_csum); 1697 if (stats.ierrors + stats.rx_nombuf > 0) { 1698 printf(" RX-error: %-"PRIu64"\n", 1699 stats.ierrors); 1700 printf(" RX-nombufs: %-14"PRIu64"\n", 1701 stats.rx_nombuf); 1702 } 1703 1704 printf(" TX-packets: %-14"PRIu64 1705 " TX-dropped: %-14"PRIu64 1706 "TX-total: %-"PRIu64"\n", 1707 stats.opackets, ports_stats[pt_id].tx_dropped, 1708 stats.opackets + ports_stats[pt_id].tx_dropped); 1709 } else { 1710 printf(" RX-packets: %14"PRIu64 1711 " RX-dropped:%14"PRIu64 1712 " RX-total:%14"PRIu64"\n", 1713 stats.ipackets, stats.imissed, 1714 stats.ipackets + stats.imissed); 1715 1716 if (cur_fwd_eng == &csum_fwd_engine) 1717 printf(" Bad-ipcsum:%14"PRIu64 1718 " Bad-l4csum:%14"PRIu64 1719 " Bad-outer-l4csum: %-14"PRIu64"\n", 1720 ports_stats[pt_id].rx_bad_ip_csum, 1721 ports_stats[pt_id].rx_bad_l4_csum, 1722 ports_stats[pt_id].rx_bad_outer_l4_csum); 1723 if ((stats.ierrors + stats.rx_nombuf) > 0) { 1724 printf(" RX-error:%"PRIu64"\n", stats.ierrors); 1725 printf(" RX-nombufs: %14"PRIu64"\n", 1726 stats.rx_nombuf); 1727 } 1728 1729 printf(" TX-packets: %14"PRIu64 1730 " TX-dropped:%14"PRIu64 1731 " TX-total:%14"PRIu64"\n", 1732 stats.opackets, ports_stats[pt_id].tx_dropped, 1733 stats.opackets + ports_stats[pt_id].tx_dropped); 1734 } 1735 1736 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS 1737 if (ports_stats[pt_id].rx_stream) 1738 pkt_burst_stats_display("RX", 1739 &ports_stats[pt_id].rx_stream->rx_burst_stats); 1740 if (ports_stats[pt_id].tx_stream) 1741 pkt_burst_stats_display("TX", 1742 &ports_stats[pt_id].tx_stream->tx_burst_stats); 1743 #endif 1744 1745 if (port->rx_queue_stats_mapping_enabled) { 1746 printf("\n"); 1747 for (j = 0; j < RTE_ETHDEV_QUEUE_STAT_CNTRS; j++) { 1748 printf(" Stats reg %2d RX-packets:%14"PRIu64 1749 " RX-errors:%14"PRIu64 1750 " RX-bytes:%14"PRIu64"\n", 1751 j, stats.q_ipackets[j], 1752 stats.q_errors[j], stats.q_ibytes[j]); 1753 } 1754 printf("\n"); 1755 } 1756 if (port->tx_queue_stats_mapping_enabled) { 1757 for (j = 0; j < RTE_ETHDEV_QUEUE_STAT_CNTRS; j++) { 1758 printf(" Stats reg %2d TX-packets:%14"PRIu64 1759 " TX-bytes:%14" 1760 PRIu64"\n", 1761 j, stats.q_opackets[j], 1762 stats.q_obytes[j]); 1763 } 1764 } 1765 1766 printf(" %s--------------------------------%s\n", 1767 fwd_stats_border, fwd_stats_border); 1768 } 1769 1770 printf("\n %s Accumulated forward statistics for all ports" 1771 "%s\n", 1772 acc_stats_border, acc_stats_border); 1773 printf(" RX-packets: %-14"PRIu64" RX-dropped: %-14"PRIu64"RX-total: " 1774 "%-"PRIu64"\n" 1775 " TX-packets: %-14"PRIu64" TX-dropped: %-14"PRIu64"TX-total: " 1776 "%-"PRIu64"\n", 1777 total_recv, total_rx_dropped, total_recv + total_rx_dropped, 1778 total_xmit, total_tx_dropped, total_xmit + total_tx_dropped); 1779 if (total_rx_nombuf > 0) 1780 printf(" RX-nombufs: %-14"PRIu64"\n", total_rx_nombuf); 1781 printf(" %s++++++++++++++++++++++++++++++++++++++++++++++" 1782 "%s\n", 1783 acc_stats_border, acc_stats_border); 1784 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES 1785 if (total_recv > 0) 1786 printf("\n CPU cycles/packet=%u (total cycles=" 1787 "%"PRIu64" / total RX packets=%"PRIu64")\n", 1788 (unsigned int)(fwd_cycles / total_recv), 1789 fwd_cycles, total_recv); 1790 #endif 1791 } 1792 1793 void 1794 fwd_stats_reset(void) 1795 { 1796 streamid_t sm_id; 1797 portid_t pt_id; 1798 int i; 1799 1800 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) { 1801 pt_id = fwd_ports_ids[i]; 1802 rte_eth_stats_get(pt_id, &ports[pt_id].stats); 1803 } 1804 for (sm_id = 0; sm_id < cur_fwd_config.nb_fwd_streams; sm_id++) { 1805 struct fwd_stream *fs = fwd_streams[sm_id]; 1806 1807 fs->rx_packets = 0; 1808 fs->tx_packets = 0; 1809 fs->fwd_dropped = 0; 1810 fs->rx_bad_ip_csum = 0; 1811 fs->rx_bad_l4_csum = 0; 1812 fs->rx_bad_outer_l4_csum = 0; 1813 1814 #ifdef RTE_TEST_PMD_RECORD_BURST_STATS 1815 memset(&fs->rx_burst_stats, 0, sizeof(fs->rx_burst_stats)); 1816 memset(&fs->tx_burst_stats, 0, sizeof(fs->tx_burst_stats)); 1817 #endif 1818 #ifdef RTE_TEST_PMD_RECORD_CORE_CYCLES 1819 fs->core_cycles = 0; 1820 #endif 1821 } 1822 } 1823 1824 static void 1825 flush_fwd_rx_queues(void) 1826 { 1827 struct rte_mbuf *pkts_burst[MAX_PKT_BURST]; 1828 portid_t rxp; 1829 portid_t port_id; 1830 queueid_t rxq; 1831 uint16_t nb_rx; 1832 uint16_t i; 1833 uint8_t j; 1834 uint64_t prev_tsc = 0, diff_tsc, cur_tsc, timer_tsc = 0; 1835 uint64_t timer_period; 1836 1837 /* convert to number of cycles */ 1838 timer_period = rte_get_timer_hz(); /* 1 second timeout */ 1839 1840 for (j = 0; j < 2; j++) { 1841 for (rxp = 0; rxp < cur_fwd_config.nb_fwd_ports; rxp++) { 1842 for (rxq = 0; rxq < nb_rxq; rxq++) { 1843 port_id = fwd_ports_ids[rxp]; 1844 /** 1845 * testpmd can stuck in the below do while loop 1846 * if rte_eth_rx_burst() always returns nonzero 1847 * packets. So timer is added to exit this loop 1848 * after 1sec timer expiry. 1849 */ 1850 prev_tsc = rte_rdtsc(); 1851 do { 1852 nb_rx = rte_eth_rx_burst(port_id, rxq, 1853 pkts_burst, MAX_PKT_BURST); 1854 for (i = 0; i < nb_rx; i++) 1855 rte_pktmbuf_free(pkts_burst[i]); 1856 1857 cur_tsc = rte_rdtsc(); 1858 diff_tsc = cur_tsc - prev_tsc; 1859 timer_tsc += diff_tsc; 1860 } while ((nb_rx > 0) && 1861 (timer_tsc < timer_period)); 1862 timer_tsc = 0; 1863 } 1864 } 1865 rte_delay_ms(10); /* wait 10 milli-seconds before retrying */ 1866 } 1867 } 1868 1869 static void 1870 run_pkt_fwd_on_lcore(struct fwd_lcore *fc, packet_fwd_t pkt_fwd) 1871 { 1872 struct fwd_stream **fsm; 1873 streamid_t nb_fs; 1874 streamid_t sm_id; 1875 #ifdef RTE_LIBRTE_BITRATE 1876 uint64_t tics_per_1sec; 1877 uint64_t tics_datum; 1878 uint64_t tics_current; 1879 uint16_t i, cnt_ports; 1880 1881 cnt_ports = nb_ports; 1882 tics_datum = rte_rdtsc(); 1883 tics_per_1sec = rte_get_timer_hz(); 1884 #endif 1885 fsm = &fwd_streams[fc->stream_idx]; 1886 nb_fs = fc->stream_nb; 1887 do { 1888 for (sm_id = 0; sm_id < nb_fs; sm_id++) 1889 (*pkt_fwd)(fsm[sm_id]); 1890 #ifdef RTE_LIBRTE_BITRATE 1891 if (bitrate_enabled != 0 && 1892 bitrate_lcore_id == rte_lcore_id()) { 1893 tics_current = rte_rdtsc(); 1894 if (tics_current - tics_datum >= tics_per_1sec) { 1895 /* Periodic bitrate calculation */ 1896 for (i = 0; i < cnt_ports; i++) 1897 rte_stats_bitrate_calc(bitrate_data, 1898 ports_ids[i]); 1899 tics_datum = tics_current; 1900 } 1901 } 1902 #endif 1903 #ifdef RTE_LIBRTE_LATENCY_STATS 1904 if (latencystats_enabled != 0 && 1905 latencystats_lcore_id == rte_lcore_id()) 1906 rte_latencystats_update(); 1907 #endif 1908 1909 } while (! fc->stopped); 1910 } 1911 1912 static int 1913 start_pkt_forward_on_core(void *fwd_arg) 1914 { 1915 run_pkt_fwd_on_lcore((struct fwd_lcore *) fwd_arg, 1916 cur_fwd_config.fwd_eng->packet_fwd); 1917 return 0; 1918 } 1919 1920 /* 1921 * Run the TXONLY packet forwarding engine to send a single burst of packets. 1922 * Used to start communication flows in network loopback test configurations. 1923 */ 1924 static int 1925 run_one_txonly_burst_on_core(void *fwd_arg) 1926 { 1927 struct fwd_lcore *fwd_lc; 1928 struct fwd_lcore tmp_lcore; 1929 1930 fwd_lc = (struct fwd_lcore *) fwd_arg; 1931 tmp_lcore = *fwd_lc; 1932 tmp_lcore.stopped = 1; 1933 run_pkt_fwd_on_lcore(&tmp_lcore, tx_only_engine.packet_fwd); 1934 return 0; 1935 } 1936 1937 /* 1938 * Launch packet forwarding: 1939 * - Setup per-port forwarding context. 1940 * - launch logical cores with their forwarding configuration. 1941 */ 1942 static void 1943 launch_packet_forwarding(lcore_function_t *pkt_fwd_on_lcore) 1944 { 1945 port_fwd_begin_t port_fwd_begin; 1946 unsigned int i; 1947 unsigned int lc_id; 1948 int diag; 1949 1950 port_fwd_begin = cur_fwd_config.fwd_eng->port_fwd_begin; 1951 if (port_fwd_begin != NULL) { 1952 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) 1953 (*port_fwd_begin)(fwd_ports_ids[i]); 1954 } 1955 for (i = 0; i < cur_fwd_config.nb_fwd_lcores; i++) { 1956 lc_id = fwd_lcores_cpuids[i]; 1957 if ((interactive == 0) || (lc_id != rte_lcore_id())) { 1958 fwd_lcores[i]->stopped = 0; 1959 diag = rte_eal_remote_launch(pkt_fwd_on_lcore, 1960 fwd_lcores[i], lc_id); 1961 if (diag != 0) 1962 printf("launch lcore %u failed - diag=%d\n", 1963 lc_id, diag); 1964 } 1965 } 1966 } 1967 1968 /* 1969 * Launch packet forwarding configuration. 1970 */ 1971 void 1972 start_packet_forwarding(int with_tx_first) 1973 { 1974 port_fwd_begin_t port_fwd_begin; 1975 port_fwd_end_t port_fwd_end; 1976 struct rte_port *port; 1977 unsigned int i; 1978 portid_t pt_id; 1979 1980 if (strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") == 0 && !nb_rxq) 1981 rte_exit(EXIT_FAILURE, "rxq are 0, cannot use rxonly fwd mode\n"); 1982 1983 if (strcmp(cur_fwd_eng->fwd_mode_name, "txonly") == 0 && !nb_txq) 1984 rte_exit(EXIT_FAILURE, "txq are 0, cannot use txonly fwd mode\n"); 1985 1986 if ((strcmp(cur_fwd_eng->fwd_mode_name, "rxonly") != 0 && 1987 strcmp(cur_fwd_eng->fwd_mode_name, "txonly") != 0) && 1988 (!nb_rxq || !nb_txq)) 1989 rte_exit(EXIT_FAILURE, 1990 "Either rxq or txq are 0, cannot use %s fwd mode\n", 1991 cur_fwd_eng->fwd_mode_name); 1992 1993 if (all_ports_started() == 0) { 1994 printf("Not all ports were started\n"); 1995 return; 1996 } 1997 if (test_done == 0) { 1998 printf("Packet forwarding already started\n"); 1999 return; 2000 } 2001 2002 2003 if(dcb_test) { 2004 for (i = 0; i < nb_fwd_ports; i++) { 2005 pt_id = fwd_ports_ids[i]; 2006 port = &ports[pt_id]; 2007 if (!port->dcb_flag) { 2008 printf("In DCB mode, all forwarding ports must " 2009 "be configured in this mode.\n"); 2010 return; 2011 } 2012 } 2013 if (nb_fwd_lcores == 1) { 2014 printf("In DCB mode,the nb forwarding cores " 2015 "should be larger than 1.\n"); 2016 return; 2017 } 2018 } 2019 test_done = 0; 2020 2021 fwd_config_setup(); 2022 2023 if(!no_flush_rx) 2024 flush_fwd_rx_queues(); 2025 2026 pkt_fwd_config_display(&cur_fwd_config); 2027 rxtx_config_display(); 2028 2029 fwd_stats_reset(); 2030 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) { 2031 pt_id = fwd_ports_ids[i]; 2032 port = &ports[pt_id]; 2033 map_port_queue_stats_mapping_registers(pt_id, port); 2034 } 2035 if (with_tx_first) { 2036 port_fwd_begin = tx_only_engine.port_fwd_begin; 2037 if (port_fwd_begin != NULL) { 2038 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) 2039 (*port_fwd_begin)(fwd_ports_ids[i]); 2040 } 2041 while (with_tx_first--) { 2042 launch_packet_forwarding( 2043 run_one_txonly_burst_on_core); 2044 rte_eal_mp_wait_lcore(); 2045 } 2046 port_fwd_end = tx_only_engine.port_fwd_end; 2047 if (port_fwd_end != NULL) { 2048 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) 2049 (*port_fwd_end)(fwd_ports_ids[i]); 2050 } 2051 } 2052 launch_packet_forwarding(start_pkt_forward_on_core); 2053 } 2054 2055 void 2056 stop_packet_forwarding(void) 2057 { 2058 port_fwd_end_t port_fwd_end; 2059 lcoreid_t lc_id; 2060 portid_t pt_id; 2061 int i; 2062 2063 if (test_done) { 2064 printf("Packet forwarding not started\n"); 2065 return; 2066 } 2067 printf("Telling cores to stop..."); 2068 for (lc_id = 0; lc_id < cur_fwd_config.nb_fwd_lcores; lc_id++) 2069 fwd_lcores[lc_id]->stopped = 1; 2070 printf("\nWaiting for lcores to finish...\n"); 2071 rte_eal_mp_wait_lcore(); 2072 port_fwd_end = cur_fwd_config.fwd_eng->port_fwd_end; 2073 if (port_fwd_end != NULL) { 2074 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) { 2075 pt_id = fwd_ports_ids[i]; 2076 (*port_fwd_end)(pt_id); 2077 } 2078 } 2079 2080 fwd_stats_display(); 2081 2082 printf("\nDone.\n"); 2083 test_done = 1; 2084 } 2085 2086 void 2087 dev_set_link_up(portid_t pid) 2088 { 2089 if (rte_eth_dev_set_link_up(pid) < 0) 2090 printf("\nSet link up fail.\n"); 2091 } 2092 2093 void 2094 dev_set_link_down(portid_t pid) 2095 { 2096 if (rte_eth_dev_set_link_down(pid) < 0) 2097 printf("\nSet link down fail.\n"); 2098 } 2099 2100 static int 2101 all_ports_started(void) 2102 { 2103 portid_t pi; 2104 struct rte_port *port; 2105 2106 RTE_ETH_FOREACH_DEV(pi) { 2107 port = &ports[pi]; 2108 /* Check if there is a port which is not started */ 2109 if ((port->port_status != RTE_PORT_STARTED) && 2110 (port->slave_flag == 0)) 2111 return 0; 2112 } 2113 2114 /* No port is not started */ 2115 return 1; 2116 } 2117 2118 int 2119 port_is_stopped(portid_t port_id) 2120 { 2121 struct rte_port *port = &ports[port_id]; 2122 2123 if ((port->port_status != RTE_PORT_STOPPED) && 2124 (port->slave_flag == 0)) 2125 return 0; 2126 return 1; 2127 } 2128 2129 int 2130 all_ports_stopped(void) 2131 { 2132 portid_t pi; 2133 2134 RTE_ETH_FOREACH_DEV(pi) { 2135 if (!port_is_stopped(pi)) 2136 return 0; 2137 } 2138 2139 return 1; 2140 } 2141 2142 int 2143 port_is_started(portid_t port_id) 2144 { 2145 if (port_id_is_invalid(port_id, ENABLED_WARN)) 2146 return 0; 2147 2148 if (ports[port_id].port_status != RTE_PORT_STARTED) 2149 return 0; 2150 2151 return 1; 2152 } 2153 2154 /* Configure the Rx and Tx hairpin queues for the selected port. */ 2155 static int 2156 setup_hairpin_queues(portid_t pi) 2157 { 2158 queueid_t qi; 2159 struct rte_eth_hairpin_conf hairpin_conf = { 2160 .peer_count = 1, 2161 }; 2162 int i; 2163 int diag; 2164 struct rte_port *port = &ports[pi]; 2165 2166 for (qi = nb_txq, i = 0; qi < nb_hairpinq + nb_txq; qi++) { 2167 hairpin_conf.peers[0].port = pi; 2168 hairpin_conf.peers[0].queue = i + nb_rxq; 2169 diag = rte_eth_tx_hairpin_queue_setup 2170 (pi, qi, nb_txd, &hairpin_conf); 2171 i++; 2172 if (diag == 0) 2173 continue; 2174 2175 /* Fail to setup rx queue, return */ 2176 if (rte_atomic16_cmpset(&(port->port_status), 2177 RTE_PORT_HANDLING, 2178 RTE_PORT_STOPPED) == 0) 2179 printf("Port %d can not be set back " 2180 "to stopped\n", pi); 2181 printf("Fail to configure port %d hairpin " 2182 "queues\n", pi); 2183 /* try to reconfigure queues next time */ 2184 port->need_reconfig_queues = 1; 2185 return -1; 2186 } 2187 for (qi = nb_rxq, i = 0; qi < nb_hairpinq + nb_rxq; qi++) { 2188 hairpin_conf.peers[0].port = pi; 2189 hairpin_conf.peers[0].queue = i + nb_txq; 2190 diag = rte_eth_rx_hairpin_queue_setup 2191 (pi, qi, nb_rxd, &hairpin_conf); 2192 i++; 2193 if (diag == 0) 2194 continue; 2195 2196 /* Fail to setup rx queue, return */ 2197 if (rte_atomic16_cmpset(&(port->port_status), 2198 RTE_PORT_HANDLING, 2199 RTE_PORT_STOPPED) == 0) 2200 printf("Port %d can not be set back " 2201 "to stopped\n", pi); 2202 printf("Fail to configure port %d hairpin " 2203 "queues\n", pi); 2204 /* try to reconfigure queues next time */ 2205 port->need_reconfig_queues = 1; 2206 return -1; 2207 } 2208 return 0; 2209 } 2210 2211 int 2212 start_port(portid_t pid) 2213 { 2214 int diag, need_check_link_status = -1; 2215 portid_t pi; 2216 queueid_t qi; 2217 struct rte_port *port; 2218 struct rte_ether_addr mac_addr; 2219 struct rte_eth_hairpin_cap cap; 2220 2221 if (port_id_is_invalid(pid, ENABLED_WARN)) 2222 return 0; 2223 2224 if(dcb_config) 2225 dcb_test = 1; 2226 RTE_ETH_FOREACH_DEV(pi) { 2227 if (pid != pi && pid != (portid_t)RTE_PORT_ALL) 2228 continue; 2229 2230 need_check_link_status = 0; 2231 port = &ports[pi]; 2232 if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STOPPED, 2233 RTE_PORT_HANDLING) == 0) { 2234 printf("Port %d is now not stopped\n", pi); 2235 continue; 2236 } 2237 2238 if (port->need_reconfig > 0) { 2239 port->need_reconfig = 0; 2240 2241 if (flow_isolate_all) { 2242 int ret = port_flow_isolate(pi, 1); 2243 if (ret) { 2244 printf("Failed to apply isolated" 2245 " mode on port %d\n", pi); 2246 return -1; 2247 } 2248 } 2249 configure_rxtx_dump_callbacks(0); 2250 printf("Configuring Port %d (socket %u)\n", pi, 2251 port->socket_id); 2252 if (nb_hairpinq > 0 && 2253 rte_eth_dev_hairpin_capability_get(pi, &cap)) { 2254 printf("Port %d doesn't support hairpin " 2255 "queues\n", pi); 2256 return -1; 2257 } 2258 /* configure port */ 2259 diag = rte_eth_dev_configure(pi, nb_rxq + nb_hairpinq, 2260 nb_txq + nb_hairpinq, 2261 &(port->dev_conf)); 2262 if (diag != 0) { 2263 if (rte_atomic16_cmpset(&(port->port_status), 2264 RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0) 2265 printf("Port %d can not be set back " 2266 "to stopped\n", pi); 2267 printf("Fail to configure port %d\n", pi); 2268 /* try to reconfigure port next time */ 2269 port->need_reconfig = 1; 2270 return -1; 2271 } 2272 } 2273 if (port->need_reconfig_queues > 0) { 2274 port->need_reconfig_queues = 0; 2275 /* setup tx queues */ 2276 for (qi = 0; qi < nb_txq; qi++) { 2277 if ((numa_support) && 2278 (txring_numa[pi] != NUMA_NO_CONFIG)) 2279 diag = rte_eth_tx_queue_setup(pi, qi, 2280 port->nb_tx_desc[qi], 2281 txring_numa[pi], 2282 &(port->tx_conf[qi])); 2283 else 2284 diag = rte_eth_tx_queue_setup(pi, qi, 2285 port->nb_tx_desc[qi], 2286 port->socket_id, 2287 &(port->tx_conf[qi])); 2288 2289 if (diag == 0) 2290 continue; 2291 2292 /* Fail to setup tx queue, return */ 2293 if (rte_atomic16_cmpset(&(port->port_status), 2294 RTE_PORT_HANDLING, 2295 RTE_PORT_STOPPED) == 0) 2296 printf("Port %d can not be set back " 2297 "to stopped\n", pi); 2298 printf("Fail to configure port %d tx queues\n", 2299 pi); 2300 /* try to reconfigure queues next time */ 2301 port->need_reconfig_queues = 1; 2302 return -1; 2303 } 2304 for (qi = 0; qi < nb_rxq; qi++) { 2305 /* setup rx queues */ 2306 if ((numa_support) && 2307 (rxring_numa[pi] != NUMA_NO_CONFIG)) { 2308 struct rte_mempool * mp = 2309 mbuf_pool_find(rxring_numa[pi]); 2310 if (mp == NULL) { 2311 printf("Failed to setup RX queue:" 2312 "No mempool allocation" 2313 " on the socket %d\n", 2314 rxring_numa[pi]); 2315 return -1; 2316 } 2317 2318 diag = rte_eth_rx_queue_setup(pi, qi, 2319 port->nb_rx_desc[qi], 2320 rxring_numa[pi], 2321 &(port->rx_conf[qi]), 2322 mp); 2323 } else { 2324 struct rte_mempool *mp = 2325 mbuf_pool_find(port->socket_id); 2326 if (mp == NULL) { 2327 printf("Failed to setup RX queue:" 2328 "No mempool allocation" 2329 " on the socket %d\n", 2330 port->socket_id); 2331 return -1; 2332 } 2333 diag = rte_eth_rx_queue_setup(pi, qi, 2334 port->nb_rx_desc[qi], 2335 port->socket_id, 2336 &(port->rx_conf[qi]), 2337 mp); 2338 } 2339 if (diag == 0) 2340 continue; 2341 2342 /* Fail to setup rx queue, return */ 2343 if (rte_atomic16_cmpset(&(port->port_status), 2344 RTE_PORT_HANDLING, 2345 RTE_PORT_STOPPED) == 0) 2346 printf("Port %d can not be set back " 2347 "to stopped\n", pi); 2348 printf("Fail to configure port %d rx queues\n", 2349 pi); 2350 /* try to reconfigure queues next time */ 2351 port->need_reconfig_queues = 1; 2352 return -1; 2353 } 2354 /* setup hairpin queues */ 2355 if (setup_hairpin_queues(pi) != 0) 2356 return -1; 2357 } 2358 configure_rxtx_dump_callbacks(verbose_level); 2359 if (clear_ptypes) { 2360 diag = rte_eth_dev_set_ptypes(pi, RTE_PTYPE_UNKNOWN, 2361 NULL, 0); 2362 if (diag < 0) 2363 printf( 2364 "Port %d: Failed to disable Ptype parsing\n", 2365 pi); 2366 } 2367 2368 /* start port */ 2369 if (rte_eth_dev_start(pi) < 0) { 2370 printf("Fail to start port %d\n", pi); 2371 2372 /* Fail to setup rx queue, return */ 2373 if (rte_atomic16_cmpset(&(port->port_status), 2374 RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0) 2375 printf("Port %d can not be set back to " 2376 "stopped\n", pi); 2377 continue; 2378 } 2379 2380 if (rte_atomic16_cmpset(&(port->port_status), 2381 RTE_PORT_HANDLING, RTE_PORT_STARTED) == 0) 2382 printf("Port %d can not be set into started\n", pi); 2383 2384 if (eth_macaddr_get_print_err(pi, &mac_addr) == 0) 2385 printf("Port %d: %02X:%02X:%02X:%02X:%02X:%02X\n", pi, 2386 mac_addr.addr_bytes[0], mac_addr.addr_bytes[1], 2387 mac_addr.addr_bytes[2], mac_addr.addr_bytes[3], 2388 mac_addr.addr_bytes[4], mac_addr.addr_bytes[5]); 2389 2390 /* at least one port started, need checking link status */ 2391 need_check_link_status = 1; 2392 } 2393 2394 if (need_check_link_status == 1 && !no_link_check) 2395 check_all_ports_link_status(RTE_PORT_ALL); 2396 else if (need_check_link_status == 0) 2397 printf("Please stop the ports first\n"); 2398 2399 printf("Done\n"); 2400 return 0; 2401 } 2402 2403 void 2404 stop_port(portid_t pid) 2405 { 2406 portid_t pi; 2407 struct rte_port *port; 2408 int need_check_link_status = 0; 2409 2410 if (dcb_test) { 2411 dcb_test = 0; 2412 dcb_config = 0; 2413 } 2414 2415 if (port_id_is_invalid(pid, ENABLED_WARN)) 2416 return; 2417 2418 printf("Stopping ports...\n"); 2419 2420 RTE_ETH_FOREACH_DEV(pi) { 2421 if (pid != pi && pid != (portid_t)RTE_PORT_ALL) 2422 continue; 2423 2424 if (port_is_forwarding(pi) != 0 && test_done == 0) { 2425 printf("Please remove port %d from forwarding configuration.\n", pi); 2426 continue; 2427 } 2428 2429 if (port_is_bonding_slave(pi)) { 2430 printf("Please remove port %d from bonded device.\n", pi); 2431 continue; 2432 } 2433 2434 port = &ports[pi]; 2435 if (rte_atomic16_cmpset(&(port->port_status), RTE_PORT_STARTED, 2436 RTE_PORT_HANDLING) == 0) 2437 continue; 2438 2439 rte_eth_dev_stop(pi); 2440 2441 if (rte_atomic16_cmpset(&(port->port_status), 2442 RTE_PORT_HANDLING, RTE_PORT_STOPPED) == 0) 2443 printf("Port %d can not be set into stopped\n", pi); 2444 need_check_link_status = 1; 2445 } 2446 if (need_check_link_status && !no_link_check) 2447 check_all_ports_link_status(RTE_PORT_ALL); 2448 2449 printf("Done\n"); 2450 } 2451 2452 static void 2453 remove_invalid_ports_in(portid_t *array, portid_t *total) 2454 { 2455 portid_t i; 2456 portid_t new_total = 0; 2457 2458 for (i = 0; i < *total; i++) 2459 if (!port_id_is_invalid(array[i], DISABLED_WARN)) { 2460 array[new_total] = array[i]; 2461 new_total++; 2462 } 2463 *total = new_total; 2464 } 2465 2466 static void 2467 remove_invalid_ports(void) 2468 { 2469 remove_invalid_ports_in(ports_ids, &nb_ports); 2470 remove_invalid_ports_in(fwd_ports_ids, &nb_fwd_ports); 2471 nb_cfg_ports = nb_fwd_ports; 2472 } 2473 2474 void 2475 close_port(portid_t pid) 2476 { 2477 portid_t pi; 2478 struct rte_port *port; 2479 2480 if (port_id_is_invalid(pid, ENABLED_WARN)) 2481 return; 2482 2483 printf("Closing ports...\n"); 2484 2485 RTE_ETH_FOREACH_DEV(pi) { 2486 if (pid != pi && pid != (portid_t)RTE_PORT_ALL) 2487 continue; 2488 2489 if (port_is_forwarding(pi) != 0 && test_done == 0) { 2490 printf("Please remove port %d from forwarding configuration.\n", pi); 2491 continue; 2492 } 2493 2494 if (port_is_bonding_slave(pi)) { 2495 printf("Please remove port %d from bonded device.\n", pi); 2496 continue; 2497 } 2498 2499 port = &ports[pi]; 2500 if (rte_atomic16_cmpset(&(port->port_status), 2501 RTE_PORT_CLOSED, RTE_PORT_CLOSED) == 1) { 2502 printf("Port %d is already closed\n", pi); 2503 continue; 2504 } 2505 2506 if (rte_atomic16_cmpset(&(port->port_status), 2507 RTE_PORT_STOPPED, RTE_PORT_HANDLING) == 0) { 2508 printf("Port %d is now not stopped\n", pi); 2509 continue; 2510 } 2511 2512 if (port->flow_list) 2513 port_flow_flush(pi); 2514 rte_eth_dev_close(pi); 2515 2516 remove_invalid_ports(); 2517 2518 if (rte_atomic16_cmpset(&(port->port_status), 2519 RTE_PORT_HANDLING, RTE_PORT_CLOSED) == 0) 2520 printf("Port %d cannot be set to closed\n", pi); 2521 } 2522 2523 printf("Done\n"); 2524 } 2525 2526 void 2527 reset_port(portid_t pid) 2528 { 2529 int diag; 2530 portid_t pi; 2531 struct rte_port *port; 2532 2533 if (port_id_is_invalid(pid, ENABLED_WARN)) 2534 return; 2535 2536 if ((pid == (portid_t)RTE_PORT_ALL && !all_ports_stopped()) || 2537 (pid != (portid_t)RTE_PORT_ALL && !port_is_stopped(pid))) { 2538 printf("Can not reset port(s), please stop port(s) first.\n"); 2539 return; 2540 } 2541 2542 printf("Resetting ports...\n"); 2543 2544 RTE_ETH_FOREACH_DEV(pi) { 2545 if (pid != pi && pid != (portid_t)RTE_PORT_ALL) 2546 continue; 2547 2548 if (port_is_forwarding(pi) != 0 && test_done == 0) { 2549 printf("Please remove port %d from forwarding " 2550 "configuration.\n", pi); 2551 continue; 2552 } 2553 2554 if (port_is_bonding_slave(pi)) { 2555 printf("Please remove port %d from bonded device.\n", 2556 pi); 2557 continue; 2558 } 2559 2560 diag = rte_eth_dev_reset(pi); 2561 if (diag == 0) { 2562 port = &ports[pi]; 2563 port->need_reconfig = 1; 2564 port->need_reconfig_queues = 1; 2565 } else { 2566 printf("Failed to reset port %d. diag=%d\n", pi, diag); 2567 } 2568 } 2569 2570 printf("Done\n"); 2571 } 2572 2573 void 2574 attach_port(char *identifier) 2575 { 2576 portid_t pi; 2577 struct rte_dev_iterator iterator; 2578 2579 printf("Attaching a new port...\n"); 2580 2581 if (identifier == NULL) { 2582 printf("Invalid parameters are specified\n"); 2583 return; 2584 } 2585 2586 if (rte_dev_probe(identifier) < 0) { 2587 TESTPMD_LOG(ERR, "Failed to attach port %s\n", identifier); 2588 return; 2589 } 2590 2591 /* first attach mode: event */ 2592 if (setup_on_probe_event) { 2593 /* new ports are detected on RTE_ETH_EVENT_NEW event */ 2594 for (pi = 0; pi < RTE_MAX_ETHPORTS; pi++) 2595 if (ports[pi].port_status == RTE_PORT_HANDLING && 2596 ports[pi].need_setup != 0) 2597 setup_attached_port(pi); 2598 return; 2599 } 2600 2601 /* second attach mode: iterator */ 2602 RTE_ETH_FOREACH_MATCHING_DEV(pi, identifier, &iterator) { 2603 /* setup ports matching the devargs used for probing */ 2604 if (port_is_forwarding(pi)) 2605 continue; /* port was already attached before */ 2606 setup_attached_port(pi); 2607 } 2608 } 2609 2610 static void 2611 setup_attached_port(portid_t pi) 2612 { 2613 unsigned int socket_id; 2614 int ret; 2615 2616 socket_id = (unsigned)rte_eth_dev_socket_id(pi); 2617 /* if socket_id is invalid, set to the first available socket. */ 2618 if (check_socket_id(socket_id) < 0) 2619 socket_id = socket_ids[0]; 2620 reconfig(pi, socket_id); 2621 ret = rte_eth_promiscuous_enable(pi); 2622 if (ret != 0) 2623 printf("Error during enabling promiscuous mode for port %u: %s - ignore\n", 2624 pi, rte_strerror(-ret)); 2625 2626 ports_ids[nb_ports++] = pi; 2627 fwd_ports_ids[nb_fwd_ports++] = pi; 2628 nb_cfg_ports = nb_fwd_ports; 2629 ports[pi].need_setup = 0; 2630 ports[pi].port_status = RTE_PORT_STOPPED; 2631 2632 printf("Port %d is attached. Now total ports is %d\n", pi, nb_ports); 2633 printf("Done\n"); 2634 } 2635 2636 void 2637 detach_port_device(portid_t port_id) 2638 { 2639 struct rte_device *dev; 2640 portid_t sibling; 2641 2642 printf("Removing a device...\n"); 2643 2644 if (port_id_is_invalid(port_id, ENABLED_WARN)) 2645 return; 2646 2647 dev = rte_eth_devices[port_id].device; 2648 if (dev == NULL) { 2649 printf("Device already removed\n"); 2650 return; 2651 } 2652 2653 if (ports[port_id].port_status != RTE_PORT_CLOSED) { 2654 if (ports[port_id].port_status != RTE_PORT_STOPPED) { 2655 printf("Port not stopped\n"); 2656 return; 2657 } 2658 printf("Port was not closed\n"); 2659 if (ports[port_id].flow_list) 2660 port_flow_flush(port_id); 2661 } 2662 2663 if (rte_dev_remove(dev) < 0) { 2664 TESTPMD_LOG(ERR, "Failed to detach device %s\n", dev->name); 2665 return; 2666 } 2667 RTE_ETH_FOREACH_DEV_OF(sibling, dev) { 2668 /* reset mapping between old ports and removed device */ 2669 rte_eth_devices[sibling].device = NULL; 2670 if (ports[sibling].port_status != RTE_PORT_CLOSED) { 2671 /* sibling ports are forced to be closed */ 2672 ports[sibling].port_status = RTE_PORT_CLOSED; 2673 printf("Port %u is closed\n", sibling); 2674 } 2675 } 2676 2677 remove_invalid_ports(); 2678 2679 printf("Device of port %u is detached\n", port_id); 2680 printf("Now total ports is %d\n", nb_ports); 2681 printf("Done\n"); 2682 return; 2683 } 2684 2685 void 2686 detach_device(char *identifier) 2687 { 2688 struct rte_dev_iterator iterator; 2689 struct rte_devargs da; 2690 portid_t port_id; 2691 2692 printf("Removing a device...\n"); 2693 2694 memset(&da, 0, sizeof(da)); 2695 if (rte_devargs_parsef(&da, "%s", identifier)) { 2696 printf("cannot parse identifier\n"); 2697 if (da.args) 2698 free(da.args); 2699 return; 2700 } 2701 2702 RTE_ETH_FOREACH_MATCHING_DEV(port_id, identifier, &iterator) { 2703 if (ports[port_id].port_status != RTE_PORT_CLOSED) { 2704 if (ports[port_id].port_status != RTE_PORT_STOPPED) { 2705 printf("Port %u not stopped\n", port_id); 2706 rte_eth_iterator_cleanup(&iterator); 2707 return; 2708 } 2709 2710 /* sibling ports are forced to be closed */ 2711 if (ports[port_id].flow_list) 2712 port_flow_flush(port_id); 2713 ports[port_id].port_status = RTE_PORT_CLOSED; 2714 printf("Port %u is now closed\n", port_id); 2715 } 2716 } 2717 2718 if (rte_eal_hotplug_remove(da.bus->name, da.name) != 0) { 2719 TESTPMD_LOG(ERR, "Failed to detach device %s(%s)\n", 2720 da.name, da.bus->name); 2721 return; 2722 } 2723 2724 remove_invalid_ports(); 2725 2726 printf("Device %s is detached\n", identifier); 2727 printf("Now total ports is %d\n", nb_ports); 2728 printf("Done\n"); 2729 } 2730 2731 void 2732 pmd_test_exit(void) 2733 { 2734 portid_t pt_id; 2735 int ret; 2736 int i; 2737 2738 if (test_done == 0) 2739 stop_packet_forwarding(); 2740 2741 for (i = 0 ; i < RTE_MAX_NUMA_NODES ; i++) { 2742 if (mempools[i]) { 2743 if (mp_alloc_type == MP_ALLOC_ANON) 2744 rte_mempool_mem_iter(mempools[i], dma_unmap_cb, 2745 NULL); 2746 } 2747 } 2748 if (ports != NULL) { 2749 no_link_check = 1; 2750 RTE_ETH_FOREACH_DEV(pt_id) { 2751 printf("\nStopping port %d...\n", pt_id); 2752 fflush(stdout); 2753 stop_port(pt_id); 2754 } 2755 RTE_ETH_FOREACH_DEV(pt_id) { 2756 printf("\nShutting down port %d...\n", pt_id); 2757 fflush(stdout); 2758 close_port(pt_id); 2759 } 2760 } 2761 2762 if (hot_plug) { 2763 ret = rte_dev_event_monitor_stop(); 2764 if (ret) { 2765 RTE_LOG(ERR, EAL, 2766 "fail to stop device event monitor."); 2767 return; 2768 } 2769 2770 ret = rte_dev_event_callback_unregister(NULL, 2771 dev_event_callback, NULL); 2772 if (ret < 0) { 2773 RTE_LOG(ERR, EAL, 2774 "fail to unregister device event callback.\n"); 2775 return; 2776 } 2777 2778 ret = rte_dev_hotplug_handle_disable(); 2779 if (ret) { 2780 RTE_LOG(ERR, EAL, 2781 "fail to disable hotplug handling.\n"); 2782 return; 2783 } 2784 } 2785 for (i = 0 ; i < RTE_MAX_NUMA_NODES ; i++) { 2786 if (mempools[i]) 2787 rte_mempool_free(mempools[i]); 2788 } 2789 2790 printf("\nBye...\n"); 2791 } 2792 2793 typedef void (*cmd_func_t)(void); 2794 struct pmd_test_command { 2795 const char *cmd_name; 2796 cmd_func_t cmd_func; 2797 }; 2798 2799 #define PMD_TEST_CMD_NB (sizeof(pmd_test_menu) / sizeof(pmd_test_menu[0])) 2800 2801 /* Check the link status of all ports in up to 9s, and print them finally */ 2802 static void 2803 check_all_ports_link_status(uint32_t port_mask) 2804 { 2805 #define CHECK_INTERVAL 100 /* 100ms */ 2806 #define MAX_CHECK_TIME 90 /* 9s (90 * 100ms) in total */ 2807 portid_t portid; 2808 uint8_t count, all_ports_up, print_flag = 0; 2809 struct rte_eth_link link; 2810 int ret; 2811 2812 printf("Checking link statuses...\n"); 2813 fflush(stdout); 2814 for (count = 0; count <= MAX_CHECK_TIME; count++) { 2815 all_ports_up = 1; 2816 RTE_ETH_FOREACH_DEV(portid) { 2817 if ((port_mask & (1 << portid)) == 0) 2818 continue; 2819 memset(&link, 0, sizeof(link)); 2820 ret = rte_eth_link_get_nowait(portid, &link); 2821 if (ret < 0) { 2822 all_ports_up = 0; 2823 if (print_flag == 1) 2824 printf("Port %u link get failed: %s\n", 2825 portid, rte_strerror(-ret)); 2826 continue; 2827 } 2828 /* print link status if flag set */ 2829 if (print_flag == 1) { 2830 if (link.link_status) 2831 printf( 2832 "Port%d Link Up. speed %u Mbps- %s\n", 2833 portid, link.link_speed, 2834 (link.link_duplex == ETH_LINK_FULL_DUPLEX) ? 2835 ("full-duplex") : ("half-duplex\n")); 2836 else 2837 printf("Port %d Link Down\n", portid); 2838 continue; 2839 } 2840 /* clear all_ports_up flag if any link down */ 2841 if (link.link_status == ETH_LINK_DOWN) { 2842 all_ports_up = 0; 2843 break; 2844 } 2845 } 2846 /* after finally printing all link status, get out */ 2847 if (print_flag == 1) 2848 break; 2849 2850 if (all_ports_up == 0) { 2851 fflush(stdout); 2852 rte_delay_ms(CHECK_INTERVAL); 2853 } 2854 2855 /* set the print_flag if all ports up or timeout */ 2856 if (all_ports_up == 1 || count == (MAX_CHECK_TIME - 1)) { 2857 print_flag = 1; 2858 } 2859 2860 if (lsc_interrupt) 2861 break; 2862 } 2863 } 2864 2865 /* 2866 * This callback is for remove a port for a device. It has limitation because 2867 * it is not for multiple port removal for a device. 2868 * TODO: the device detach invoke will plan to be removed from user side to 2869 * eal. And convert all PMDs to free port resources on ether device closing. 2870 */ 2871 static void 2872 rmv_port_callback(void *arg) 2873 { 2874 int need_to_start = 0; 2875 int org_no_link_check = no_link_check; 2876 portid_t port_id = (intptr_t)arg; 2877 2878 RTE_ETH_VALID_PORTID_OR_RET(port_id); 2879 2880 if (!test_done && port_is_forwarding(port_id)) { 2881 need_to_start = 1; 2882 stop_packet_forwarding(); 2883 } 2884 no_link_check = 1; 2885 stop_port(port_id); 2886 no_link_check = org_no_link_check; 2887 close_port(port_id); 2888 detach_port_device(port_id); 2889 if (need_to_start) 2890 start_packet_forwarding(0); 2891 } 2892 2893 /* This function is used by the interrupt thread */ 2894 static int 2895 eth_event_callback(portid_t port_id, enum rte_eth_event_type type, void *param, 2896 void *ret_param) 2897 { 2898 RTE_SET_USED(param); 2899 RTE_SET_USED(ret_param); 2900 2901 if (type >= RTE_ETH_EVENT_MAX) { 2902 fprintf(stderr, "\nPort %" PRIu16 ": %s called upon invalid event %d\n", 2903 port_id, __func__, type); 2904 fflush(stderr); 2905 } else if (event_print_mask & (UINT32_C(1) << type)) { 2906 printf("\nPort %" PRIu16 ": %s event\n", port_id, 2907 eth_event_desc[type]); 2908 fflush(stdout); 2909 } 2910 2911 switch (type) { 2912 case RTE_ETH_EVENT_NEW: 2913 ports[port_id].need_setup = 1; 2914 ports[port_id].port_status = RTE_PORT_HANDLING; 2915 break; 2916 case RTE_ETH_EVENT_INTR_RMV: 2917 if (port_id_is_invalid(port_id, DISABLED_WARN)) 2918 break; 2919 if (rte_eal_alarm_set(100000, 2920 rmv_port_callback, (void *)(intptr_t)port_id)) 2921 fprintf(stderr, "Could not set up deferred device removal\n"); 2922 break; 2923 default: 2924 break; 2925 } 2926 return 0; 2927 } 2928 2929 static int 2930 register_eth_event_callback(void) 2931 { 2932 int ret; 2933 enum rte_eth_event_type event; 2934 2935 for (event = RTE_ETH_EVENT_UNKNOWN; 2936 event < RTE_ETH_EVENT_MAX; event++) { 2937 ret = rte_eth_dev_callback_register(RTE_ETH_ALL, 2938 event, 2939 eth_event_callback, 2940 NULL); 2941 if (ret != 0) { 2942 TESTPMD_LOG(ERR, "Failed to register callback for " 2943 "%s event\n", eth_event_desc[event]); 2944 return -1; 2945 } 2946 } 2947 2948 return 0; 2949 } 2950 2951 /* This function is used by the interrupt thread */ 2952 static void 2953 dev_event_callback(const char *device_name, enum rte_dev_event_type type, 2954 __rte_unused void *arg) 2955 { 2956 uint16_t port_id; 2957 int ret; 2958 2959 if (type >= RTE_DEV_EVENT_MAX) { 2960 fprintf(stderr, "%s called upon invalid event %d\n", 2961 __func__, type); 2962 fflush(stderr); 2963 } 2964 2965 switch (type) { 2966 case RTE_DEV_EVENT_REMOVE: 2967 RTE_LOG(DEBUG, EAL, "The device: %s has been removed!\n", 2968 device_name); 2969 ret = rte_eth_dev_get_port_by_name(device_name, &port_id); 2970 if (ret) { 2971 RTE_LOG(ERR, EAL, "can not get port by device %s!\n", 2972 device_name); 2973 return; 2974 } 2975 /* 2976 * Because the user's callback is invoked in eal interrupt 2977 * callback, the interrupt callback need to be finished before 2978 * it can be unregistered when detaching device. So finish 2979 * callback soon and use a deferred removal to detach device 2980 * is need. It is a workaround, once the device detaching be 2981 * moved into the eal in the future, the deferred removal could 2982 * be deleted. 2983 */ 2984 if (rte_eal_alarm_set(100000, 2985 rmv_port_callback, (void *)(intptr_t)port_id)) 2986 RTE_LOG(ERR, EAL, 2987 "Could not set up deferred device removal\n"); 2988 break; 2989 case RTE_DEV_EVENT_ADD: 2990 RTE_LOG(ERR, EAL, "The device: %s has been added!\n", 2991 device_name); 2992 /* TODO: After finish kernel driver binding, 2993 * begin to attach port. 2994 */ 2995 break; 2996 default: 2997 break; 2998 } 2999 } 3000 3001 static int 3002 set_tx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port) 3003 { 3004 uint16_t i; 3005 int diag; 3006 uint8_t mapping_found = 0; 3007 3008 for (i = 0; i < nb_tx_queue_stats_mappings; i++) { 3009 if ((tx_queue_stats_mappings[i].port_id == port_id) && 3010 (tx_queue_stats_mappings[i].queue_id < nb_txq )) { 3011 diag = rte_eth_dev_set_tx_queue_stats_mapping(port_id, 3012 tx_queue_stats_mappings[i].queue_id, 3013 tx_queue_stats_mappings[i].stats_counter_id); 3014 if (diag != 0) 3015 return diag; 3016 mapping_found = 1; 3017 } 3018 } 3019 if (mapping_found) 3020 port->tx_queue_stats_mapping_enabled = 1; 3021 return 0; 3022 } 3023 3024 static int 3025 set_rx_queue_stats_mapping_registers(portid_t port_id, struct rte_port *port) 3026 { 3027 uint16_t i; 3028 int diag; 3029 uint8_t mapping_found = 0; 3030 3031 for (i = 0; i < nb_rx_queue_stats_mappings; i++) { 3032 if ((rx_queue_stats_mappings[i].port_id == port_id) && 3033 (rx_queue_stats_mappings[i].queue_id < nb_rxq )) { 3034 diag = rte_eth_dev_set_rx_queue_stats_mapping(port_id, 3035 rx_queue_stats_mappings[i].queue_id, 3036 rx_queue_stats_mappings[i].stats_counter_id); 3037 if (diag != 0) 3038 return diag; 3039 mapping_found = 1; 3040 } 3041 } 3042 if (mapping_found) 3043 port->rx_queue_stats_mapping_enabled = 1; 3044 return 0; 3045 } 3046 3047 static void 3048 map_port_queue_stats_mapping_registers(portid_t pi, struct rte_port *port) 3049 { 3050 int diag = 0; 3051 3052 diag = set_tx_queue_stats_mapping_registers(pi, port); 3053 if (diag != 0) { 3054 if (diag == -ENOTSUP) { 3055 port->tx_queue_stats_mapping_enabled = 0; 3056 printf("TX queue stats mapping not supported port id=%d\n", pi); 3057 } 3058 else 3059 rte_exit(EXIT_FAILURE, 3060 "set_tx_queue_stats_mapping_registers " 3061 "failed for port id=%d diag=%d\n", 3062 pi, diag); 3063 } 3064 3065 diag = set_rx_queue_stats_mapping_registers(pi, port); 3066 if (diag != 0) { 3067 if (diag == -ENOTSUP) { 3068 port->rx_queue_stats_mapping_enabled = 0; 3069 printf("RX queue stats mapping not supported port id=%d\n", pi); 3070 } 3071 else 3072 rte_exit(EXIT_FAILURE, 3073 "set_rx_queue_stats_mapping_registers " 3074 "failed for port id=%d diag=%d\n", 3075 pi, diag); 3076 } 3077 } 3078 3079 static void 3080 rxtx_port_config(struct rte_port *port) 3081 { 3082 uint16_t qid; 3083 uint64_t offloads; 3084 3085 for (qid = 0; qid < nb_rxq; qid++) { 3086 offloads = port->rx_conf[qid].offloads; 3087 port->rx_conf[qid] = port->dev_info.default_rxconf; 3088 if (offloads != 0) 3089 port->rx_conf[qid].offloads = offloads; 3090 3091 /* Check if any Rx parameters have been passed */ 3092 if (rx_pthresh != RTE_PMD_PARAM_UNSET) 3093 port->rx_conf[qid].rx_thresh.pthresh = rx_pthresh; 3094 3095 if (rx_hthresh != RTE_PMD_PARAM_UNSET) 3096 port->rx_conf[qid].rx_thresh.hthresh = rx_hthresh; 3097 3098 if (rx_wthresh != RTE_PMD_PARAM_UNSET) 3099 port->rx_conf[qid].rx_thresh.wthresh = rx_wthresh; 3100 3101 if (rx_free_thresh != RTE_PMD_PARAM_UNSET) 3102 port->rx_conf[qid].rx_free_thresh = rx_free_thresh; 3103 3104 if (rx_drop_en != RTE_PMD_PARAM_UNSET) 3105 port->rx_conf[qid].rx_drop_en = rx_drop_en; 3106 3107 port->nb_rx_desc[qid] = nb_rxd; 3108 } 3109 3110 for (qid = 0; qid < nb_txq; qid++) { 3111 offloads = port->tx_conf[qid].offloads; 3112 port->tx_conf[qid] = port->dev_info.default_txconf; 3113 if (offloads != 0) 3114 port->tx_conf[qid].offloads = offloads; 3115 3116 /* Check if any Tx parameters have been passed */ 3117 if (tx_pthresh != RTE_PMD_PARAM_UNSET) 3118 port->tx_conf[qid].tx_thresh.pthresh = tx_pthresh; 3119 3120 if (tx_hthresh != RTE_PMD_PARAM_UNSET) 3121 port->tx_conf[qid].tx_thresh.hthresh = tx_hthresh; 3122 3123 if (tx_wthresh != RTE_PMD_PARAM_UNSET) 3124 port->tx_conf[qid].tx_thresh.wthresh = tx_wthresh; 3125 3126 if (tx_rs_thresh != RTE_PMD_PARAM_UNSET) 3127 port->tx_conf[qid].tx_rs_thresh = tx_rs_thresh; 3128 3129 if (tx_free_thresh != RTE_PMD_PARAM_UNSET) 3130 port->tx_conf[qid].tx_free_thresh = tx_free_thresh; 3131 3132 port->nb_tx_desc[qid] = nb_txd; 3133 } 3134 } 3135 3136 void 3137 init_port_config(void) 3138 { 3139 portid_t pid; 3140 struct rte_port *port; 3141 int ret; 3142 3143 RTE_ETH_FOREACH_DEV(pid) { 3144 port = &ports[pid]; 3145 port->dev_conf.fdir_conf = fdir_conf; 3146 3147 ret = eth_dev_info_get_print_err(pid, &port->dev_info); 3148 if (ret != 0) 3149 return; 3150 3151 if (nb_rxq > 1) { 3152 port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL; 3153 port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 3154 rss_hf & port->dev_info.flow_type_rss_offloads; 3155 } else { 3156 port->dev_conf.rx_adv_conf.rss_conf.rss_key = NULL; 3157 port->dev_conf.rx_adv_conf.rss_conf.rss_hf = 0; 3158 } 3159 3160 if (port->dcb_flag == 0) { 3161 if( port->dev_conf.rx_adv_conf.rss_conf.rss_hf != 0) 3162 port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_RSS; 3163 else 3164 port->dev_conf.rxmode.mq_mode = ETH_MQ_RX_NONE; 3165 } 3166 3167 rxtx_port_config(port); 3168 3169 ret = eth_macaddr_get_print_err(pid, &port->eth_addr); 3170 if (ret != 0) 3171 return; 3172 3173 map_port_queue_stats_mapping_registers(pid, port); 3174 #if defined RTE_LIBRTE_IXGBE_PMD && defined RTE_LIBRTE_IXGBE_BYPASS 3175 rte_pmd_ixgbe_bypass_init(pid); 3176 #endif 3177 3178 if (lsc_interrupt && 3179 (rte_eth_devices[pid].data->dev_flags & 3180 RTE_ETH_DEV_INTR_LSC)) 3181 port->dev_conf.intr_conf.lsc = 1; 3182 if (rmv_interrupt && 3183 (rte_eth_devices[pid].data->dev_flags & 3184 RTE_ETH_DEV_INTR_RMV)) 3185 port->dev_conf.intr_conf.rmv = 1; 3186 } 3187 } 3188 3189 void set_port_slave_flag(portid_t slave_pid) 3190 { 3191 struct rte_port *port; 3192 3193 port = &ports[slave_pid]; 3194 port->slave_flag = 1; 3195 } 3196 3197 void clear_port_slave_flag(portid_t slave_pid) 3198 { 3199 struct rte_port *port; 3200 3201 port = &ports[slave_pid]; 3202 port->slave_flag = 0; 3203 } 3204 3205 uint8_t port_is_bonding_slave(portid_t slave_pid) 3206 { 3207 struct rte_port *port; 3208 3209 port = &ports[slave_pid]; 3210 if ((rte_eth_devices[slave_pid].data->dev_flags & 3211 RTE_ETH_DEV_BONDED_SLAVE) || (port->slave_flag == 1)) 3212 return 1; 3213 return 0; 3214 } 3215 3216 const uint16_t vlan_tags[] = { 3217 0, 1, 2, 3, 4, 5, 6, 7, 3218 8, 9, 10, 11, 12, 13, 14, 15, 3219 16, 17, 18, 19, 20, 21, 22, 23, 3220 24, 25, 26, 27, 28, 29, 30, 31 3221 }; 3222 3223 static int 3224 get_eth_dcb_conf(portid_t pid, struct rte_eth_conf *eth_conf, 3225 enum dcb_mode_enable dcb_mode, 3226 enum rte_eth_nb_tcs num_tcs, 3227 uint8_t pfc_en) 3228 { 3229 uint8_t i; 3230 int32_t rc; 3231 struct rte_eth_rss_conf rss_conf; 3232 3233 /* 3234 * Builds up the correct configuration for dcb+vt based on the vlan tags array 3235 * given above, and the number of traffic classes available for use. 3236 */ 3237 if (dcb_mode == DCB_VT_ENABLED) { 3238 struct rte_eth_vmdq_dcb_conf *vmdq_rx_conf = 3239 ð_conf->rx_adv_conf.vmdq_dcb_conf; 3240 struct rte_eth_vmdq_dcb_tx_conf *vmdq_tx_conf = 3241 ð_conf->tx_adv_conf.vmdq_dcb_tx_conf; 3242 3243 /* VMDQ+DCB RX and TX configurations */ 3244 vmdq_rx_conf->enable_default_pool = 0; 3245 vmdq_rx_conf->default_pool = 0; 3246 vmdq_rx_conf->nb_queue_pools = 3247 (num_tcs == ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS); 3248 vmdq_tx_conf->nb_queue_pools = 3249 (num_tcs == ETH_4_TCS ? ETH_32_POOLS : ETH_16_POOLS); 3250 3251 vmdq_rx_conf->nb_pool_maps = vmdq_rx_conf->nb_queue_pools; 3252 for (i = 0; i < vmdq_rx_conf->nb_pool_maps; i++) { 3253 vmdq_rx_conf->pool_map[i].vlan_id = vlan_tags[i]; 3254 vmdq_rx_conf->pool_map[i].pools = 3255 1 << (i % vmdq_rx_conf->nb_queue_pools); 3256 } 3257 for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) { 3258 vmdq_rx_conf->dcb_tc[i] = i % num_tcs; 3259 vmdq_tx_conf->dcb_tc[i] = i % num_tcs; 3260 } 3261 3262 /* set DCB mode of RX and TX of multiple queues */ 3263 eth_conf->rxmode.mq_mode = ETH_MQ_RX_VMDQ_DCB; 3264 eth_conf->txmode.mq_mode = ETH_MQ_TX_VMDQ_DCB; 3265 } else { 3266 struct rte_eth_dcb_rx_conf *rx_conf = 3267 ð_conf->rx_adv_conf.dcb_rx_conf; 3268 struct rte_eth_dcb_tx_conf *tx_conf = 3269 ð_conf->tx_adv_conf.dcb_tx_conf; 3270 3271 rc = rte_eth_dev_rss_hash_conf_get(pid, &rss_conf); 3272 if (rc != 0) 3273 return rc; 3274 3275 rx_conf->nb_tcs = num_tcs; 3276 tx_conf->nb_tcs = num_tcs; 3277 3278 for (i = 0; i < ETH_DCB_NUM_USER_PRIORITIES; i++) { 3279 rx_conf->dcb_tc[i] = i % num_tcs; 3280 tx_conf->dcb_tc[i] = i % num_tcs; 3281 } 3282 3283 eth_conf->rxmode.mq_mode = ETH_MQ_RX_DCB_RSS; 3284 eth_conf->rx_adv_conf.rss_conf = rss_conf; 3285 eth_conf->txmode.mq_mode = ETH_MQ_TX_DCB; 3286 } 3287 3288 if (pfc_en) 3289 eth_conf->dcb_capability_en = 3290 ETH_DCB_PG_SUPPORT | ETH_DCB_PFC_SUPPORT; 3291 else 3292 eth_conf->dcb_capability_en = ETH_DCB_PG_SUPPORT; 3293 3294 return 0; 3295 } 3296 3297 int 3298 init_port_dcb_config(portid_t pid, 3299 enum dcb_mode_enable dcb_mode, 3300 enum rte_eth_nb_tcs num_tcs, 3301 uint8_t pfc_en) 3302 { 3303 struct rte_eth_conf port_conf; 3304 struct rte_port *rte_port; 3305 int retval; 3306 uint16_t i; 3307 3308 rte_port = &ports[pid]; 3309 3310 memset(&port_conf, 0, sizeof(struct rte_eth_conf)); 3311 /* Enter DCB configuration status */ 3312 dcb_config = 1; 3313 3314 port_conf.rxmode = rte_port->dev_conf.rxmode; 3315 port_conf.txmode = rte_port->dev_conf.txmode; 3316 3317 /*set configuration of DCB in vt mode and DCB in non-vt mode*/ 3318 retval = get_eth_dcb_conf(pid, &port_conf, dcb_mode, num_tcs, pfc_en); 3319 if (retval < 0) 3320 return retval; 3321 port_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER; 3322 3323 /* re-configure the device . */ 3324 retval = rte_eth_dev_configure(pid, nb_rxq, nb_rxq, &port_conf); 3325 if (retval < 0) 3326 return retval; 3327 3328 retval = eth_dev_info_get_print_err(pid, &rte_port->dev_info); 3329 if (retval != 0) 3330 return retval; 3331 3332 /* If dev_info.vmdq_pool_base is greater than 0, 3333 * the queue id of vmdq pools is started after pf queues. 3334 */ 3335 if (dcb_mode == DCB_VT_ENABLED && 3336 rte_port->dev_info.vmdq_pool_base > 0) { 3337 printf("VMDQ_DCB multi-queue mode is nonsensical" 3338 " for port %d.", pid); 3339 return -1; 3340 } 3341 3342 /* Assume the ports in testpmd have the same dcb capability 3343 * and has the same number of rxq and txq in dcb mode 3344 */ 3345 if (dcb_mode == DCB_VT_ENABLED) { 3346 if (rte_port->dev_info.max_vfs > 0) { 3347 nb_rxq = rte_port->dev_info.nb_rx_queues; 3348 nb_txq = rte_port->dev_info.nb_tx_queues; 3349 } else { 3350 nb_rxq = rte_port->dev_info.max_rx_queues; 3351 nb_txq = rte_port->dev_info.max_tx_queues; 3352 } 3353 } else { 3354 /*if vt is disabled, use all pf queues */ 3355 if (rte_port->dev_info.vmdq_pool_base == 0) { 3356 nb_rxq = rte_port->dev_info.max_rx_queues; 3357 nb_txq = rte_port->dev_info.max_tx_queues; 3358 } else { 3359 nb_rxq = (queueid_t)num_tcs; 3360 nb_txq = (queueid_t)num_tcs; 3361 3362 } 3363 } 3364 rx_free_thresh = 64; 3365 3366 memcpy(&rte_port->dev_conf, &port_conf, sizeof(struct rte_eth_conf)); 3367 3368 rxtx_port_config(rte_port); 3369 /* VLAN filter */ 3370 rte_port->dev_conf.rxmode.offloads |= DEV_RX_OFFLOAD_VLAN_FILTER; 3371 for (i = 0; i < RTE_DIM(vlan_tags); i++) 3372 rx_vft_set(pid, vlan_tags[i], 1); 3373 3374 retval = eth_macaddr_get_print_err(pid, &rte_port->eth_addr); 3375 if (retval != 0) 3376 return retval; 3377 3378 map_port_queue_stats_mapping_registers(pid, rte_port); 3379 3380 rte_port->dcb_flag = 1; 3381 3382 return 0; 3383 } 3384 3385 static void 3386 init_port(void) 3387 { 3388 /* Configuration of Ethernet ports. */ 3389 ports = rte_zmalloc("testpmd: ports", 3390 sizeof(struct rte_port) * RTE_MAX_ETHPORTS, 3391 RTE_CACHE_LINE_SIZE); 3392 if (ports == NULL) { 3393 rte_exit(EXIT_FAILURE, 3394 "rte_zmalloc(%d struct rte_port) failed\n", 3395 RTE_MAX_ETHPORTS); 3396 } 3397 3398 /* Initialize ports NUMA structures */ 3399 memset(port_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS); 3400 memset(rxring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS); 3401 memset(txring_numa, NUMA_NO_CONFIG, RTE_MAX_ETHPORTS); 3402 } 3403 3404 static void 3405 force_quit(void) 3406 { 3407 pmd_test_exit(); 3408 prompt_exit(); 3409 } 3410 3411 static void 3412 print_stats(void) 3413 { 3414 uint8_t i; 3415 const char clr[] = { 27, '[', '2', 'J', '\0' }; 3416 const char top_left[] = { 27, '[', '1', ';', '1', 'H', '\0' }; 3417 3418 /* Clear screen and move to top left */ 3419 printf("%s%s", clr, top_left); 3420 3421 printf("\nPort statistics ===================================="); 3422 for (i = 0; i < cur_fwd_config.nb_fwd_ports; i++) 3423 nic_stats_display(fwd_ports_ids[i]); 3424 3425 fflush(stdout); 3426 } 3427 3428 static void 3429 signal_handler(int signum) 3430 { 3431 if (signum == SIGINT || signum == SIGTERM) { 3432 printf("\nSignal %d received, preparing to exit...\n", 3433 signum); 3434 #ifdef RTE_LIBRTE_PDUMP 3435 /* uninitialize packet capture framework */ 3436 rte_pdump_uninit(); 3437 #endif 3438 #ifdef RTE_LIBRTE_LATENCY_STATS 3439 if (latencystats_enabled != 0) 3440 rte_latencystats_uninit(); 3441 #endif 3442 force_quit(); 3443 /* Set flag to indicate the force termination. */ 3444 f_quit = 1; 3445 /* exit with the expected status */ 3446 signal(signum, SIG_DFL); 3447 kill(getpid(), signum); 3448 } 3449 } 3450 3451 int 3452 main(int argc, char** argv) 3453 { 3454 int diag; 3455 portid_t port_id; 3456 uint16_t count; 3457 int ret; 3458 3459 signal(SIGINT, signal_handler); 3460 signal(SIGTERM, signal_handler); 3461 3462 testpmd_logtype = rte_log_register("testpmd"); 3463 if (testpmd_logtype < 0) 3464 rte_exit(EXIT_FAILURE, "Cannot register log type"); 3465 rte_log_set_level(testpmd_logtype, RTE_LOG_DEBUG); 3466 3467 diag = rte_eal_init(argc, argv); 3468 if (diag < 0) 3469 rte_exit(EXIT_FAILURE, "Cannot init EAL: %s\n", 3470 rte_strerror(rte_errno)); 3471 3472 if (rte_eal_process_type() == RTE_PROC_SECONDARY) 3473 rte_exit(EXIT_FAILURE, 3474 "Secondary process type not supported.\n"); 3475 3476 ret = register_eth_event_callback(); 3477 if (ret != 0) 3478 rte_exit(EXIT_FAILURE, "Cannot register for ethdev events"); 3479 3480 #ifdef RTE_LIBRTE_PDUMP 3481 /* initialize packet capture framework */ 3482 rte_pdump_init(); 3483 #endif 3484 3485 count = 0; 3486 RTE_ETH_FOREACH_DEV(port_id) { 3487 ports_ids[count] = port_id; 3488 count++; 3489 } 3490 nb_ports = (portid_t) count; 3491 if (nb_ports == 0) 3492 TESTPMD_LOG(WARNING, "No probed ethernet devices\n"); 3493 3494 /* allocate port structures, and init them */ 3495 init_port(); 3496 3497 set_def_fwd_config(); 3498 if (nb_lcores == 0) 3499 rte_exit(EXIT_FAILURE, "No cores defined for forwarding\n" 3500 "Check the core mask argument\n"); 3501 3502 /* Bitrate/latency stats disabled by default */ 3503 #ifdef RTE_LIBRTE_BITRATE 3504 bitrate_enabled = 0; 3505 #endif 3506 #ifdef RTE_LIBRTE_LATENCY_STATS 3507 latencystats_enabled = 0; 3508 #endif 3509 3510 /* on FreeBSD, mlockall() is disabled by default */ 3511 #ifdef RTE_EXEC_ENV_FREEBSD 3512 do_mlockall = 0; 3513 #else 3514 do_mlockall = 1; 3515 #endif 3516 3517 argc -= diag; 3518 argv += diag; 3519 if (argc > 1) 3520 launch_args_parse(argc, argv); 3521 3522 if (do_mlockall && mlockall(MCL_CURRENT | MCL_FUTURE)) { 3523 TESTPMD_LOG(NOTICE, "mlockall() failed with error \"%s\"\n", 3524 strerror(errno)); 3525 } 3526 3527 if (tx_first && interactive) 3528 rte_exit(EXIT_FAILURE, "--tx-first cannot be used on " 3529 "interactive mode.\n"); 3530 3531 if (tx_first && lsc_interrupt) { 3532 printf("Warning: lsc_interrupt needs to be off when " 3533 " using tx_first. Disabling.\n"); 3534 lsc_interrupt = 0; 3535 } 3536 3537 if (!nb_rxq && !nb_txq) 3538 printf("Warning: Either rx or tx queues should be non-zero\n"); 3539 3540 if (nb_rxq > 1 && nb_rxq > nb_txq) 3541 printf("Warning: nb_rxq=%d enables RSS configuration, " 3542 "but nb_txq=%d will prevent to fully test it.\n", 3543 nb_rxq, nb_txq); 3544 3545 init_config(); 3546 3547 if (hot_plug) { 3548 ret = rte_dev_hotplug_handle_enable(); 3549 if (ret) { 3550 RTE_LOG(ERR, EAL, 3551 "fail to enable hotplug handling."); 3552 return -1; 3553 } 3554 3555 ret = rte_dev_event_monitor_start(); 3556 if (ret) { 3557 RTE_LOG(ERR, EAL, 3558 "fail to start device event monitoring."); 3559 return -1; 3560 } 3561 3562 ret = rte_dev_event_callback_register(NULL, 3563 dev_event_callback, NULL); 3564 if (ret) { 3565 RTE_LOG(ERR, EAL, 3566 "fail to register device event callback\n"); 3567 return -1; 3568 } 3569 } 3570 3571 if (!no_device_start && start_port(RTE_PORT_ALL) != 0) 3572 rte_exit(EXIT_FAILURE, "Start ports failed\n"); 3573 3574 /* set all ports to promiscuous mode by default */ 3575 RTE_ETH_FOREACH_DEV(port_id) { 3576 ret = rte_eth_promiscuous_enable(port_id); 3577 if (ret != 0) 3578 printf("Error during enabling promiscuous mode for port %u: %s - ignore\n", 3579 port_id, rte_strerror(-ret)); 3580 } 3581 3582 /* Init metrics library */ 3583 rte_metrics_init(rte_socket_id()); 3584 3585 #ifdef RTE_LIBRTE_LATENCY_STATS 3586 if (latencystats_enabled != 0) { 3587 int ret = rte_latencystats_init(1, NULL); 3588 if (ret) 3589 printf("Warning: latencystats init()" 3590 " returned error %d\n", ret); 3591 printf("Latencystats running on lcore %d\n", 3592 latencystats_lcore_id); 3593 } 3594 #endif 3595 3596 /* Setup bitrate stats */ 3597 #ifdef RTE_LIBRTE_BITRATE 3598 if (bitrate_enabled != 0) { 3599 bitrate_data = rte_stats_bitrate_create(); 3600 if (bitrate_data == NULL) 3601 rte_exit(EXIT_FAILURE, 3602 "Could not allocate bitrate data.\n"); 3603 rte_stats_bitrate_reg(bitrate_data); 3604 } 3605 #endif 3606 3607 #ifdef RTE_LIBRTE_CMDLINE 3608 if (strlen(cmdline_filename) != 0) 3609 cmdline_read_from_file(cmdline_filename); 3610 3611 if (interactive == 1) { 3612 if (auto_start) { 3613 printf("Start automatic packet forwarding\n"); 3614 start_packet_forwarding(0); 3615 } 3616 prompt(); 3617 pmd_test_exit(); 3618 } else 3619 #endif 3620 { 3621 char c; 3622 int rc; 3623 3624 f_quit = 0; 3625 3626 printf("No commandline core given, start packet forwarding\n"); 3627 start_packet_forwarding(tx_first); 3628 if (stats_period != 0) { 3629 uint64_t prev_time = 0, cur_time, diff_time = 0; 3630 uint64_t timer_period; 3631 3632 /* Convert to number of cycles */ 3633 timer_period = stats_period * rte_get_timer_hz(); 3634 3635 while (f_quit == 0) { 3636 cur_time = rte_get_timer_cycles(); 3637 diff_time += cur_time - prev_time; 3638 3639 if (diff_time >= timer_period) { 3640 print_stats(); 3641 /* Reset the timer */ 3642 diff_time = 0; 3643 } 3644 /* Sleep to avoid unnecessary checks */ 3645 prev_time = cur_time; 3646 sleep(1); 3647 } 3648 } 3649 3650 printf("Press enter to exit\n"); 3651 rc = read(0, &c, 1); 3652 pmd_test_exit(); 3653 if (rc < 0) 3654 return 1; 3655 } 3656 3657 ret = rte_eal_cleanup(); 3658 if (ret != 0) 3659 rte_exit(EXIT_FAILURE, 3660 "EAL cleanup failed: %s\n", strerror(-ret)); 3661 3662 return EXIT_SUCCESS; 3663 } 3664