1 /*- 2 * Copyright (c) 2001 Atsushi Onoe 3 * Copyright (c) 2002-2008 Sam Leffler, Errno Consulting 4 * All rights reserved. 5 * 6 * Redistribution and use in source and binary forms, with or without 7 * modification, are permitted provided that the following conditions 8 * are met: 9 * 1. Redistributions of source code must retain the above copyright 10 * notice, this list of conditions and the following disclaimer. 11 * 2. Redistributions in binary form must reproduce the above copyright 12 * notice, this list of conditions and the following disclaimer in the 13 * documentation and/or other materials provided with the distribution. 14 * 15 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR 16 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES 17 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 18 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, 19 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT 20 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, 21 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 22 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT 23 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF 24 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. 25 * 26 * $FreeBSD: head/sys/net80211/ieee80211_proto.c 195618 2009-07-11 15:02:45Z rpaulo $ 27 */ 28 29 /* 30 * IEEE 802.11 protocol support. 31 */ 32 33 #include "opt_inet.h" 34 #include "opt_wlan.h" 35 36 #include <sys/param.h> 37 #include <sys/kernel.h> 38 #include <sys/systm.h> 39 40 #include <sys/socket.h> 41 #include <sys/sockio.h> 42 43 #include <net/if.h> 44 #include <net/if_media.h> 45 #include <net/ifq_var.h> 46 #include <net/route.h> 47 48 #include <netproto/802_11/ieee80211_var.h> 49 #include <netproto/802_11/ieee80211_adhoc.h> 50 #include <netproto/802_11/ieee80211_sta.h> 51 #include <netproto/802_11/ieee80211_hostap.h> 52 #include <netproto/802_11/ieee80211_wds.h> 53 #ifdef IEEE80211_SUPPORT_MESH 54 #include <netproto/802_11/ieee80211_mesh.h> 55 #endif 56 #include <netproto/802_11/ieee80211_monitor.h> 57 #include <netproto/802_11/ieee80211_input.h> 58 59 /* XXX tunables */ 60 #define AGGRESSIVE_MODE_SWITCH_HYSTERESIS 3 /* pkts / 100ms */ 61 #define HIGH_PRI_SWITCH_THRESH 10 /* pkts / 100ms */ 62 63 const char *ieee80211_mgt_subtype_name[] = { 64 "assoc_req", "assoc_resp", "reassoc_req", "reassoc_resp", 65 "probe_req", "probe_resp", "reserved#6", "reserved#7", 66 "beacon", "atim", "disassoc", "auth", 67 "deauth", "action", "reserved#14", "reserved#15" 68 }; 69 const char *ieee80211_ctl_subtype_name[] = { 70 "reserved#0", "reserved#1", "reserved#2", "reserved#3", 71 "reserved#3", "reserved#5", "reserved#6", "reserved#7", 72 "reserved#8", "reserved#9", "ps_poll", "rts", 73 "cts", "ack", "cf_end", "cf_end_ack" 74 }; 75 const char *ieee80211_opmode_name[IEEE80211_OPMODE_MAX] = { 76 "IBSS", /* IEEE80211_M_IBSS */ 77 "STA", /* IEEE80211_M_STA */ 78 "WDS", /* IEEE80211_M_WDS */ 79 "AHDEMO", /* IEEE80211_M_AHDEMO */ 80 "HOSTAP", /* IEEE80211_M_HOSTAP */ 81 "MONITOR", /* IEEE80211_M_MONITOR */ 82 "MBSS" /* IEEE80211_M_MBSS */ 83 }; 84 const char *ieee80211_state_name[IEEE80211_S_MAX] = { 85 "INIT", /* IEEE80211_S_INIT */ 86 "SCAN", /* IEEE80211_S_SCAN */ 87 "AUTH", /* IEEE80211_S_AUTH */ 88 "ASSOC", /* IEEE80211_S_ASSOC */ 89 "CAC", /* IEEE80211_S_CAC */ 90 "RUN", /* IEEE80211_S_RUN */ 91 "CSA", /* IEEE80211_S_CSA */ 92 "SLEEP", /* IEEE80211_S_SLEEP */ 93 }; 94 const char *ieee80211_wme_acnames[] = { 95 "WME_AC_BE", 96 "WME_AC_BK", 97 "WME_AC_VI", 98 "WME_AC_VO", 99 "WME_UPSD", 100 }; 101 102 static void beacon_miss_task(void *, int); 103 static void beacon_swmiss_task(void *, int); 104 static void parent_updown_task(void *, int); 105 static void update_mcast_task(void *, int); 106 static void update_promisc_task(void *, int); 107 static void update_channel_task(void *, int); 108 static void ieee80211_newstate_task(void *, int); 109 static int ieee80211_new_state_locked(struct ieee80211vap *, 110 enum ieee80211_state, int); 111 112 static int 113 null_raw_xmit(struct ieee80211_node *ni, struct mbuf *m, 114 const struct ieee80211_bpf_params *params) 115 { 116 struct ifnet *ifp = ni->ni_ic->ic_ifp; 117 118 if_printf(ifp, "missing ic_raw_xmit callback, drop frame\n"); 119 m_freem(m); 120 return ENETDOWN; 121 } 122 123 void 124 ieee80211_proto_attach(struct ieee80211com *ic) 125 { 126 struct ifnet *ifp = ic->ic_ifp; 127 128 /* override the 802.3 setting */ 129 ifp->if_hdrlen = ic->ic_headroom 130 + sizeof(struct ieee80211_qosframe_addr4) 131 + IEEE80211_WEP_IVLEN + IEEE80211_WEP_KIDLEN 132 + IEEE80211_WEP_EXTIVLEN; 133 /* XXX no way to recalculate on ifdetach */ 134 if (ALIGN(ifp->if_hdrlen) > max_linkhdr) { 135 /* XXX sanity check... */ 136 max_linkhdr = ALIGN(ifp->if_hdrlen); 137 max_hdr = max_linkhdr + max_protohdr; 138 max_datalen = MHLEN - max_hdr; 139 } 140 ic->ic_protmode = IEEE80211_PROT_CTSONLY; 141 142 TASK_INIT(&ic->ic_parent_task, 0, parent_updown_task, ifp); 143 TASK_INIT(&ic->ic_mcast_task, 0, update_mcast_task, ic); 144 TASK_INIT(&ic->ic_promisc_task, 0, update_promisc_task, ic); 145 TASK_INIT(&ic->ic_chan_task, 0, update_channel_task, ic); 146 TASK_INIT(&ic->ic_bmiss_task, 0, beacon_miss_task, ic); 147 148 ic->ic_wme.wme_hipri_switch_hysteresis = 149 AGGRESSIVE_MODE_SWITCH_HYSTERESIS; 150 151 /* initialize management frame handlers */ 152 ic->ic_send_mgmt = ieee80211_send_mgmt; 153 ic->ic_raw_xmit = null_raw_xmit; 154 155 ieee80211_adhoc_attach(ic); 156 ieee80211_sta_attach(ic); 157 ieee80211_wds_attach(ic); 158 ieee80211_hostap_attach(ic); 159 #ifdef IEEE80211_SUPPORT_MESH 160 ieee80211_mesh_attach(ic); 161 #endif 162 ieee80211_monitor_attach(ic); 163 } 164 165 void 166 ieee80211_proto_detach(struct ieee80211com *ic) 167 { 168 ieee80211_monitor_detach(ic); 169 #ifdef IEEE80211_SUPPORT_MESH 170 ieee80211_mesh_detach(ic); 171 #endif 172 ieee80211_hostap_detach(ic); 173 ieee80211_wds_detach(ic); 174 ieee80211_adhoc_detach(ic); 175 ieee80211_sta_detach(ic); 176 } 177 178 static void 179 null_update_beacon(struct ieee80211vap *vap, int item) 180 { 181 } 182 183 void 184 ieee80211_proto_vattach(struct ieee80211vap *vap) 185 { 186 struct ieee80211com *ic = vap->iv_ic; 187 struct ifnet *ifp = vap->iv_ifp; 188 int i; 189 190 /* override the 802.3 setting */ 191 ifp->if_hdrlen = ic->ic_ifp->if_hdrlen; 192 193 vap->iv_rtsthreshold = IEEE80211_RTS_DEFAULT; 194 vap->iv_fragthreshold = IEEE80211_FRAG_DEFAULT; 195 vap->iv_bmiss_max = IEEE80211_BMISS_MAX; 196 callout_init_mp(&vap->iv_swbmiss); 197 callout_init_mp(&vap->iv_mgtsend); 198 TASK_INIT(&vap->iv_nstate_task, 0, ieee80211_newstate_task, vap); 199 TASK_INIT(&vap->iv_swbmiss_task, 0, beacon_swmiss_task, vap); 200 /* 201 * Install default tx rate handling: no fixed rate, lowest 202 * supported rate for mgmt and multicast frames. Default 203 * max retry count. These settings can be changed by the 204 * driver and/or user applications. 205 */ 206 for (i = IEEE80211_MODE_11A; i < IEEE80211_MODE_MAX; i++) { 207 const struct ieee80211_rateset *rs = &ic->ic_sup_rates[i]; 208 209 vap->iv_txparms[i].ucastrate = IEEE80211_FIXED_RATE_NONE; 210 if (i == IEEE80211_MODE_11NA || i == IEEE80211_MODE_11NG) { 211 vap->iv_txparms[i].mgmtrate = 0 | IEEE80211_RATE_MCS; 212 vap->iv_txparms[i].mcastrate = 0 | IEEE80211_RATE_MCS; 213 } else { 214 vap->iv_txparms[i].mgmtrate = 215 rs->rs_rates[0] & IEEE80211_RATE_VAL; 216 vap->iv_txparms[i].mcastrate = 217 rs->rs_rates[0] & IEEE80211_RATE_VAL; 218 } 219 vap->iv_txparms[i].maxretry = IEEE80211_TXMAX_DEFAULT; 220 } 221 vap->iv_roaming = IEEE80211_ROAMING_AUTO; 222 223 vap->iv_update_beacon = null_update_beacon; 224 vap->iv_deliver_data = ieee80211_deliver_data; 225 226 /* attach support for operating mode */ 227 ic->ic_vattach[vap->iv_opmode](vap); 228 } 229 230 void 231 ieee80211_proto_vdetach(struct ieee80211vap *vap) 232 { 233 #define FREEAPPIE(ie) do { \ 234 if (ie != NULL) \ 235 kfree(ie, M_80211_NODE_IE); \ 236 } while (0) 237 /* 238 * Detach operating mode module. 239 */ 240 if (vap->iv_opdetach != NULL) 241 vap->iv_opdetach(vap); 242 /* 243 * This should not be needed as we detach when reseting 244 * the state but be conservative here since the 245 * authenticator may do things like spawn kernel threads. 246 */ 247 if (vap->iv_auth->ia_detach != NULL) 248 vap->iv_auth->ia_detach(vap); 249 /* 250 * Detach any ACL'ator. 251 */ 252 if (vap->iv_acl != NULL) 253 vap->iv_acl->iac_detach(vap); 254 255 FREEAPPIE(vap->iv_appie_beacon); 256 FREEAPPIE(vap->iv_appie_probereq); 257 FREEAPPIE(vap->iv_appie_proberesp); 258 FREEAPPIE(vap->iv_appie_assocreq); 259 FREEAPPIE(vap->iv_appie_assocresp); 260 FREEAPPIE(vap->iv_appie_wpa); 261 #undef FREEAPPIE 262 } 263 264 /* 265 * Simple-minded authenticator module support. 266 */ 267 268 #define IEEE80211_AUTH_MAX (IEEE80211_AUTH_WPA+1) 269 /* XXX well-known names */ 270 static const char *auth_modnames[IEEE80211_AUTH_MAX] = { 271 "wlan_internal", /* IEEE80211_AUTH_NONE */ 272 "wlan_internal", /* IEEE80211_AUTH_OPEN */ 273 "wlan_internal", /* IEEE80211_AUTH_SHARED */ 274 "wlan_xauth", /* IEEE80211_AUTH_8021X */ 275 "wlan_internal", /* IEEE80211_AUTH_AUTO */ 276 "wlan_xauth", /* IEEE80211_AUTH_WPA */ 277 }; 278 static const struct ieee80211_authenticator *authenticators[IEEE80211_AUTH_MAX]; 279 280 static const struct ieee80211_authenticator auth_internal = { 281 .ia_name = "wlan_internal", 282 .ia_attach = NULL, 283 .ia_detach = NULL, 284 .ia_node_join = NULL, 285 .ia_node_leave = NULL, 286 }; 287 288 /* 289 * Setup internal authenticators once; they are never unregistered. 290 */ 291 static void 292 ieee80211_auth_setup(void) 293 { 294 ieee80211_authenticator_register(IEEE80211_AUTH_OPEN, &auth_internal); 295 ieee80211_authenticator_register(IEEE80211_AUTH_SHARED, &auth_internal); 296 ieee80211_authenticator_register(IEEE80211_AUTH_AUTO, &auth_internal); 297 } 298 SYSINIT(wlan_auth, SI_SUB_DRIVERS, SI_ORDER_FIRST, ieee80211_auth_setup, NULL); 299 300 const struct ieee80211_authenticator * 301 ieee80211_authenticator_get(int auth) 302 { 303 if (auth >= IEEE80211_AUTH_MAX) 304 return NULL; 305 if (authenticators[auth] == NULL) 306 ieee80211_load_module(auth_modnames[auth]); 307 return authenticators[auth]; 308 } 309 310 void 311 ieee80211_authenticator_register(int type, 312 const struct ieee80211_authenticator *auth) 313 { 314 if (type >= IEEE80211_AUTH_MAX) 315 return; 316 authenticators[type] = auth; 317 } 318 319 void 320 ieee80211_authenticator_unregister(int type) 321 { 322 323 if (type >= IEEE80211_AUTH_MAX) 324 return; 325 authenticators[type] = NULL; 326 } 327 328 /* 329 * Very simple-minded ACL module support. 330 */ 331 /* XXX just one for now */ 332 static const struct ieee80211_aclator *acl = NULL; 333 334 void 335 ieee80211_aclator_register(const struct ieee80211_aclator *iac) 336 { 337 kprintf("wlan: %s acl policy registered\n", iac->iac_name); 338 acl = iac; 339 } 340 341 void 342 ieee80211_aclator_unregister(const struct ieee80211_aclator *iac) 343 { 344 if (acl == iac) 345 acl = NULL; 346 kprintf("wlan: %s acl policy unregistered\n", iac->iac_name); 347 } 348 349 const struct ieee80211_aclator * 350 ieee80211_aclator_get(const char *name) 351 { 352 if (acl == NULL) 353 ieee80211_load_module("wlan_acl"); 354 return acl != NULL && strcmp(acl->iac_name, name) == 0 ? acl : NULL; 355 } 356 357 void 358 ieee80211_print_essid(const uint8_t *essid, int len) 359 { 360 const uint8_t *p; 361 int i; 362 363 if (len > IEEE80211_NWID_LEN) 364 len = IEEE80211_NWID_LEN; 365 /* determine printable or not */ 366 for (i = 0, p = essid; i < len; i++, p++) { 367 if (*p < ' ' || *p > 0x7e) 368 break; 369 } 370 if (i == len) { 371 kprintf("\""); 372 for (i = 0, p = essid; i < len; i++, p++) 373 kprintf("%c", *p); 374 kprintf("\""); 375 } else { 376 kprintf("0x"); 377 for (i = 0, p = essid; i < len; i++, p++) 378 kprintf("%02x", *p); 379 } 380 } 381 382 void 383 ieee80211_dump_pkt(struct ieee80211com *ic, 384 const uint8_t *buf, int len, int rate, int rssi) 385 { 386 const struct ieee80211_frame *wh; 387 int i; 388 389 wh = (const struct ieee80211_frame *)buf; 390 switch (wh->i_fc[1] & IEEE80211_FC1_DIR_MASK) { 391 case IEEE80211_FC1_DIR_NODS: 392 kprintf("NODS %6D", wh->i_addr2, ":"); 393 kprintf("->%6D", wh->i_addr1, ":"); 394 kprintf("(%6D)", wh->i_addr3, ":"); 395 break; 396 case IEEE80211_FC1_DIR_TODS: 397 kprintf("TODS %6D", wh->i_addr2, ":"); 398 kprintf("->%6D", wh->i_addr3, ":"); 399 kprintf("(%6D)", wh->i_addr1, ":"); 400 break; 401 case IEEE80211_FC1_DIR_FROMDS: 402 kprintf("FRDS %6D", wh->i_addr3, ":"); 403 kprintf("->%6D", wh->i_addr1, ":"); 404 kprintf("(%6D)", wh->i_addr2, ":"); 405 break; 406 case IEEE80211_FC1_DIR_DSTODS: 407 kprintf("DSDS %6D", (const uint8_t *)&wh[1], ":"); 408 kprintf("->%6D", wh->i_addr3, ":"); 409 kprintf("(%6D", wh->i_addr2, ":"); 410 kprintf("->%6D)", wh->i_addr1, ":"); 411 break; 412 } 413 switch (wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK) { 414 case IEEE80211_FC0_TYPE_DATA: 415 kprintf(" data"); 416 break; 417 case IEEE80211_FC0_TYPE_MGT: 418 kprintf(" %s", ieee80211_mgt_subtype_name[ 419 (wh->i_fc[0] & IEEE80211_FC0_SUBTYPE_MASK) 420 >> IEEE80211_FC0_SUBTYPE_SHIFT]); 421 break; 422 default: 423 kprintf(" type#%d", wh->i_fc[0] & IEEE80211_FC0_TYPE_MASK); 424 break; 425 } 426 if (IEEE80211_QOS_HAS_SEQ(wh)) { 427 const struct ieee80211_qosframe *qwh = 428 (const struct ieee80211_qosframe *)buf; 429 kprintf(" QoS [TID %u%s]", qwh->i_qos[0] & IEEE80211_QOS_TID, 430 qwh->i_qos[0] & IEEE80211_QOS_ACKPOLICY ? " ACM" : ""); 431 } 432 if (wh->i_fc[1] & IEEE80211_FC1_WEP) { 433 int off; 434 435 off = ieee80211_anyhdrspace(ic, wh); 436 kprintf(" WEP [IV %.02x %.02x %.02x", 437 buf[off+0], buf[off+1], buf[off+2]); 438 if (buf[off+IEEE80211_WEP_IVLEN] & IEEE80211_WEP_EXTIV) 439 kprintf(" %.02x %.02x %.02x", 440 buf[off+4], buf[off+5], buf[off+6]); 441 kprintf(" KID %u]", buf[off+IEEE80211_WEP_IVLEN] >> 6); 442 } 443 if (rate >= 0) 444 kprintf(" %dM", rate / 2); 445 if (rssi >= 0) 446 kprintf(" +%d", rssi); 447 kprintf("\n"); 448 if (len > 0) { 449 for (i = 0; i < len; i++) { 450 if ((i & 1) == 0) 451 kprintf(" "); 452 kprintf("%02x", buf[i]); 453 } 454 kprintf("\n"); 455 } 456 } 457 458 static __inline int 459 findrix(const struct ieee80211_rateset *rs, int r) 460 { 461 int i; 462 463 for (i = 0; i < rs->rs_nrates; i++) 464 if ((rs->rs_rates[i] & IEEE80211_RATE_VAL) == r) 465 return i; 466 return -1; 467 } 468 469 int 470 ieee80211_fix_rate(struct ieee80211_node *ni, 471 struct ieee80211_rateset *nrs, int flags) 472 { 473 #define RV(v) ((v) & IEEE80211_RATE_VAL) 474 struct ieee80211vap *vap = ni->ni_vap; 475 struct ieee80211com *ic = ni->ni_ic; 476 int i, j, rix, error; 477 int okrate, badrate, fixedrate, ucastrate; 478 const struct ieee80211_rateset *srs; 479 uint8_t r; 480 481 error = 0; 482 okrate = badrate = 0; 483 ucastrate = vap->iv_txparms[ieee80211_chan2mode(ni->ni_chan)].ucastrate; 484 if (ucastrate != IEEE80211_FIXED_RATE_NONE) { 485 /* 486 * Workaround awkwardness with fixed rate. We are called 487 * to check both the legacy rate set and the HT rate set 488 * but we must apply any legacy fixed rate check only to the 489 * legacy rate set and vice versa. We cannot tell what type 490 * of rate set we've been given (legacy or HT) but we can 491 * distinguish the fixed rate type (MCS have 0x80 set). 492 * So to deal with this the caller communicates whether to 493 * check MCS or legacy rate using the flags and we use the 494 * type of any fixed rate to avoid applying an MCS to a 495 * legacy rate and vice versa. 496 */ 497 if (ucastrate & 0x80) { 498 if (flags & IEEE80211_F_DOFRATE) 499 flags &= ~IEEE80211_F_DOFRATE; 500 } else if ((ucastrate & 0x80) == 0) { 501 if (flags & IEEE80211_F_DOFMCS) 502 flags &= ~IEEE80211_F_DOFMCS; 503 } 504 /* NB: required to make MCS match below work */ 505 ucastrate &= IEEE80211_RATE_VAL; 506 } 507 fixedrate = IEEE80211_FIXED_RATE_NONE; 508 /* 509 * XXX we are called to process both MCS and legacy rates; 510 * we must use the appropriate basic rate set or chaos will 511 * ensue; for now callers that want MCS must supply 512 * IEEE80211_F_DOBRS; at some point we'll need to split this 513 * function so there are two variants, one for MCS and one 514 * for legacy rates. 515 */ 516 if (flags & IEEE80211_F_DOBRS) 517 srs = (const struct ieee80211_rateset *) 518 ieee80211_get_suphtrates(ic, ni->ni_chan); 519 else 520 srs = ieee80211_get_suprates(ic, ni->ni_chan); 521 for (i = 0; i < nrs->rs_nrates; ) { 522 if (flags & IEEE80211_F_DOSORT) { 523 /* 524 * Sort rates. 525 */ 526 for (j = i + 1; j < nrs->rs_nrates; j++) { 527 if (RV(nrs->rs_rates[i]) > RV(nrs->rs_rates[j])) { 528 r = nrs->rs_rates[i]; 529 nrs->rs_rates[i] = nrs->rs_rates[j]; 530 nrs->rs_rates[j] = r; 531 } 532 } 533 } 534 r = nrs->rs_rates[i] & IEEE80211_RATE_VAL; 535 badrate = r; 536 /* 537 * Check for fixed rate. 538 */ 539 if (r == ucastrate) 540 fixedrate = r; 541 /* 542 * Check against supported rates. 543 */ 544 rix = findrix(srs, r); 545 if (flags & IEEE80211_F_DONEGO) { 546 if (rix < 0) { 547 /* 548 * A rate in the node's rate set is not 549 * supported. If this is a basic rate and we 550 * are operating as a STA then this is an error. 551 * Otherwise we just discard/ignore the rate. 552 */ 553 if ((flags & IEEE80211_F_JOIN) && 554 (nrs->rs_rates[i] & IEEE80211_RATE_BASIC)) 555 error++; 556 } else if ((flags & IEEE80211_F_JOIN) == 0) { 557 /* 558 * Overwrite with the supported rate 559 * value so any basic rate bit is set. 560 */ 561 nrs->rs_rates[i] = srs->rs_rates[rix]; 562 } 563 } 564 if ((flags & IEEE80211_F_DODEL) && rix < 0) { 565 /* 566 * Delete unacceptable rates. 567 */ 568 nrs->rs_nrates--; 569 for (j = i; j < nrs->rs_nrates; j++) 570 nrs->rs_rates[j] = nrs->rs_rates[j + 1]; 571 nrs->rs_rates[j] = 0; 572 continue; 573 } 574 if (rix >= 0) 575 okrate = nrs->rs_rates[i]; 576 i++; 577 } 578 if (okrate == 0 || error != 0 || 579 ((flags & (IEEE80211_F_DOFRATE|IEEE80211_F_DOFMCS)) && 580 fixedrate != ucastrate)) { 581 IEEE80211_NOTE(vap, IEEE80211_MSG_XRATE | IEEE80211_MSG_11N, ni, 582 "%s: flags 0x%x okrate %d error %d fixedrate 0x%x " 583 "ucastrate %x\n", __func__, flags, okrate, error, 584 fixedrate, ucastrate); 585 return badrate | IEEE80211_RATE_BASIC; 586 } else 587 return RV(okrate); 588 #undef RV 589 } 590 591 /* 592 * Reset 11g-related state. 593 */ 594 void 595 ieee80211_reset_erp(struct ieee80211com *ic) 596 { 597 ic->ic_flags &= ~IEEE80211_F_USEPROT; 598 ic->ic_nonerpsta = 0; 599 ic->ic_longslotsta = 0; 600 /* 601 * Short slot time is enabled only when operating in 11g 602 * and not in an IBSS. We must also honor whether or not 603 * the driver is capable of doing it. 604 */ 605 ieee80211_set_shortslottime(ic, 606 IEEE80211_IS_CHAN_A(ic->ic_curchan) || 607 IEEE80211_IS_CHAN_HT(ic->ic_curchan) || 608 (IEEE80211_IS_CHAN_ANYG(ic->ic_curchan) && 609 ic->ic_opmode == IEEE80211_M_HOSTAP && 610 (ic->ic_caps & IEEE80211_C_SHSLOT))); 611 /* 612 * Set short preamble and ERP barker-preamble flags. 613 */ 614 if (IEEE80211_IS_CHAN_A(ic->ic_curchan) || 615 (ic->ic_caps & IEEE80211_C_SHPREAMBLE)) { 616 ic->ic_flags |= IEEE80211_F_SHPREAMBLE; 617 ic->ic_flags &= ~IEEE80211_F_USEBARKER; 618 } else { 619 ic->ic_flags &= ~IEEE80211_F_SHPREAMBLE; 620 ic->ic_flags |= IEEE80211_F_USEBARKER; 621 } 622 } 623 624 /* 625 * Set the short slot time state and notify the driver. 626 */ 627 void 628 ieee80211_set_shortslottime(struct ieee80211com *ic, int onoff) 629 { 630 if (onoff) 631 ic->ic_flags |= IEEE80211_F_SHSLOT; 632 else 633 ic->ic_flags &= ~IEEE80211_F_SHSLOT; 634 /* notify driver */ 635 if (ic->ic_updateslot != NULL) 636 ic->ic_updateslot(ic->ic_ifp); 637 } 638 639 /* 640 * Check if the specified rate set supports ERP. 641 * NB: the rate set is assumed to be sorted. 642 */ 643 int 644 ieee80211_iserp_rateset(const struct ieee80211_rateset *rs) 645 { 646 static const int rates[] = { 2, 4, 11, 22, 12, 24, 48 }; 647 int i, j; 648 649 if (rs->rs_nrates < NELEM(rates)) 650 return 0; 651 for (i = 0; i < NELEM(rates); i++) { 652 for (j = 0; j < rs->rs_nrates; j++) { 653 int r = rs->rs_rates[j] & IEEE80211_RATE_VAL; 654 if (rates[i] == r) 655 goto next; 656 if (r > rates[i]) 657 return 0; 658 } 659 return 0; 660 next: 661 ; 662 } 663 return 1; 664 } 665 666 /* 667 * Mark the basic rates for the rate table based on the 668 * operating mode. For real 11g we mark all the 11b rates 669 * and 6, 12, and 24 OFDM. For 11b compatibility we mark only 670 * 11b rates. There's also a pseudo 11a-mode used to mark only 671 * the basic OFDM rates. 672 */ 673 static void 674 setbasicrates(struct ieee80211_rateset *rs, 675 enum ieee80211_phymode mode, int add) 676 { 677 static const struct ieee80211_rateset basic[IEEE80211_MODE_MAX] = { 678 [IEEE80211_MODE_11A] = { 3, { 12, 24, 48 } }, 679 [IEEE80211_MODE_11B] = { 2, { 2, 4 } }, 680 /* NB: mixed b/g */ 681 [IEEE80211_MODE_11G] = { 4, { 2, 4, 11, 22 } }, 682 [IEEE80211_MODE_TURBO_A] = { 3, { 12, 24, 48 } }, 683 [IEEE80211_MODE_TURBO_G] = { 4, { 2, 4, 11, 22 } }, 684 [IEEE80211_MODE_STURBO_A] = { 3, { 12, 24, 48 } }, 685 [IEEE80211_MODE_HALF] = { 3, { 6, 12, 24 } }, 686 [IEEE80211_MODE_QUARTER] = { 3, { 3, 6, 12 } }, 687 [IEEE80211_MODE_11NA] = { 3, { 12, 24, 48 } }, 688 /* NB: mixed b/g */ 689 [IEEE80211_MODE_11NG] = { 4, { 2, 4, 11, 22 } }, 690 }; 691 int i, j; 692 693 for (i = 0; i < rs->rs_nrates; i++) { 694 if (!add) 695 rs->rs_rates[i] &= IEEE80211_RATE_VAL; 696 for (j = 0; j < basic[mode].rs_nrates; j++) 697 if (basic[mode].rs_rates[j] == rs->rs_rates[i]) { 698 rs->rs_rates[i] |= IEEE80211_RATE_BASIC; 699 break; 700 } 701 } 702 } 703 704 /* 705 * Set the basic rates in a rate set. 706 */ 707 void 708 ieee80211_setbasicrates(struct ieee80211_rateset *rs, 709 enum ieee80211_phymode mode) 710 { 711 setbasicrates(rs, mode, 0); 712 } 713 714 /* 715 * Add basic rates to a rate set. 716 */ 717 void 718 ieee80211_addbasicrates(struct ieee80211_rateset *rs, 719 enum ieee80211_phymode mode) 720 { 721 setbasicrates(rs, mode, 1); 722 } 723 724 /* 725 * WME protocol support. 726 * 727 * The default 11a/b/g/n parameters come from the WiFi Alliance WMM 728 * System Interopability Test Plan (v1.4, Appendix F) and the 802.11n 729 * Draft 2.0 Test Plan (Appendix D). 730 * 731 * Static/Dynamic Turbo mode settings come from Atheros. 732 */ 733 typedef struct phyParamType { 734 uint8_t aifsn; 735 uint8_t logcwmin; 736 uint8_t logcwmax; 737 uint16_t txopLimit; 738 uint8_t acm; 739 } paramType; 740 741 static const struct phyParamType phyParamForAC_BE[IEEE80211_MODE_MAX] = { 742 [IEEE80211_MODE_AUTO] = { 3, 4, 6, 0, 0 }, 743 [IEEE80211_MODE_11A] = { 3, 4, 6, 0, 0 }, 744 [IEEE80211_MODE_11B] = { 3, 4, 6, 0, 0 }, 745 [IEEE80211_MODE_11G] = { 3, 4, 6, 0, 0 }, 746 [IEEE80211_MODE_FH] = { 3, 4, 6, 0, 0 }, 747 [IEEE80211_MODE_TURBO_A]= { 2, 3, 5, 0, 0 }, 748 [IEEE80211_MODE_TURBO_G]= { 2, 3, 5, 0, 0 }, 749 [IEEE80211_MODE_STURBO_A]={ 2, 3, 5, 0, 0 }, 750 [IEEE80211_MODE_HALF] = { 3, 4, 6, 0, 0 }, 751 [IEEE80211_MODE_QUARTER]= { 3, 4, 6, 0, 0 }, 752 [IEEE80211_MODE_11NA] = { 3, 4, 6, 0, 0 }, 753 [IEEE80211_MODE_11NG] = { 3, 4, 6, 0, 0 }, 754 }; 755 static const struct phyParamType phyParamForAC_BK[IEEE80211_MODE_MAX] = { 756 [IEEE80211_MODE_AUTO] = { 7, 4, 10, 0, 0 }, 757 [IEEE80211_MODE_11A] = { 7, 4, 10, 0, 0 }, 758 [IEEE80211_MODE_11B] = { 7, 4, 10, 0, 0 }, 759 [IEEE80211_MODE_11G] = { 7, 4, 10, 0, 0 }, 760 [IEEE80211_MODE_FH] = { 7, 4, 10, 0, 0 }, 761 [IEEE80211_MODE_TURBO_A]= { 7, 3, 10, 0, 0 }, 762 [IEEE80211_MODE_TURBO_G]= { 7, 3, 10, 0, 0 }, 763 [IEEE80211_MODE_STURBO_A]={ 7, 3, 10, 0, 0 }, 764 [IEEE80211_MODE_HALF] = { 7, 4, 10, 0, 0 }, 765 [IEEE80211_MODE_QUARTER]= { 7, 4, 10, 0, 0 }, 766 [IEEE80211_MODE_11NA] = { 7, 4, 10, 0, 0 }, 767 [IEEE80211_MODE_11NG] = { 7, 4, 10, 0, 0 }, 768 }; 769 static const struct phyParamType phyParamForAC_VI[IEEE80211_MODE_MAX] = { 770 [IEEE80211_MODE_AUTO] = { 1, 3, 4, 94, 0 }, 771 [IEEE80211_MODE_11A] = { 1, 3, 4, 94, 0 }, 772 [IEEE80211_MODE_11B] = { 1, 3, 4, 188, 0 }, 773 [IEEE80211_MODE_11G] = { 1, 3, 4, 94, 0 }, 774 [IEEE80211_MODE_FH] = { 1, 3, 4, 188, 0 }, 775 [IEEE80211_MODE_TURBO_A]= { 1, 2, 3, 94, 0 }, 776 [IEEE80211_MODE_TURBO_G]= { 1, 2, 3, 94, 0 }, 777 [IEEE80211_MODE_STURBO_A]={ 1, 2, 3, 94, 0 }, 778 [IEEE80211_MODE_HALF] = { 1, 3, 4, 94, 0 }, 779 [IEEE80211_MODE_QUARTER]= { 1, 3, 4, 94, 0 }, 780 [IEEE80211_MODE_11NA] = { 1, 3, 4, 94, 0 }, 781 [IEEE80211_MODE_11NG] = { 1, 3, 4, 94, 0 }, 782 }; 783 static const struct phyParamType phyParamForAC_VO[IEEE80211_MODE_MAX] = { 784 [IEEE80211_MODE_AUTO] = { 1, 2, 3, 47, 0 }, 785 [IEEE80211_MODE_11A] = { 1, 2, 3, 47, 0 }, 786 [IEEE80211_MODE_11B] = { 1, 2, 3, 102, 0 }, 787 [IEEE80211_MODE_11G] = { 1, 2, 3, 47, 0 }, 788 [IEEE80211_MODE_FH] = { 1, 2, 3, 102, 0 }, 789 [IEEE80211_MODE_TURBO_A]= { 1, 2, 2, 47, 0 }, 790 [IEEE80211_MODE_TURBO_G]= { 1, 2, 2, 47, 0 }, 791 [IEEE80211_MODE_STURBO_A]={ 1, 2, 2, 47, 0 }, 792 [IEEE80211_MODE_HALF] = { 1, 2, 3, 47, 0 }, 793 [IEEE80211_MODE_QUARTER]= { 1, 2, 3, 47, 0 }, 794 [IEEE80211_MODE_11NA] = { 1, 2, 3, 47, 0 }, 795 [IEEE80211_MODE_11NG] = { 1, 2, 3, 47, 0 }, 796 }; 797 798 static const struct phyParamType bssPhyParamForAC_BE[IEEE80211_MODE_MAX] = { 799 [IEEE80211_MODE_AUTO] = { 3, 4, 10, 0, 0 }, 800 [IEEE80211_MODE_11A] = { 3, 4, 10, 0, 0 }, 801 [IEEE80211_MODE_11B] = { 3, 4, 10, 0, 0 }, 802 [IEEE80211_MODE_11G] = { 3, 4, 10, 0, 0 }, 803 [IEEE80211_MODE_FH] = { 3, 4, 10, 0, 0 }, 804 [IEEE80211_MODE_TURBO_A]= { 2, 3, 10, 0, 0 }, 805 [IEEE80211_MODE_TURBO_G]= { 2, 3, 10, 0, 0 }, 806 [IEEE80211_MODE_STURBO_A]={ 2, 3, 10, 0, 0 }, 807 [IEEE80211_MODE_HALF] = { 3, 4, 10, 0, 0 }, 808 [IEEE80211_MODE_QUARTER]= { 3, 4, 10, 0, 0 }, 809 [IEEE80211_MODE_11NA] = { 3, 4, 10, 0, 0 }, 810 [IEEE80211_MODE_11NG] = { 3, 4, 10, 0, 0 }, 811 }; 812 static const struct phyParamType bssPhyParamForAC_VI[IEEE80211_MODE_MAX] = { 813 [IEEE80211_MODE_AUTO] = { 2, 3, 4, 94, 0 }, 814 [IEEE80211_MODE_11A] = { 2, 3, 4, 94, 0 }, 815 [IEEE80211_MODE_11B] = { 2, 3, 4, 188, 0 }, 816 [IEEE80211_MODE_11G] = { 2, 3, 4, 94, 0 }, 817 [IEEE80211_MODE_FH] = { 2, 3, 4, 188, 0 }, 818 [IEEE80211_MODE_TURBO_A]= { 2, 2, 3, 94, 0 }, 819 [IEEE80211_MODE_TURBO_G]= { 2, 2, 3, 94, 0 }, 820 [IEEE80211_MODE_STURBO_A]={ 2, 2, 3, 94, 0 }, 821 [IEEE80211_MODE_HALF] = { 2, 3, 4, 94, 0 }, 822 [IEEE80211_MODE_QUARTER]= { 2, 3, 4, 94, 0 }, 823 [IEEE80211_MODE_11NA] = { 2, 3, 4, 94, 0 }, 824 [IEEE80211_MODE_11NG] = { 2, 3, 4, 94, 0 }, 825 }; 826 static const struct phyParamType bssPhyParamForAC_VO[IEEE80211_MODE_MAX] = { 827 [IEEE80211_MODE_AUTO] = { 2, 2, 3, 47, 0 }, 828 [IEEE80211_MODE_11A] = { 2, 2, 3, 47, 0 }, 829 [IEEE80211_MODE_11B] = { 2, 2, 3, 102, 0 }, 830 [IEEE80211_MODE_11G] = { 2, 2, 3, 47, 0 }, 831 [IEEE80211_MODE_FH] = { 2, 2, 3, 102, 0 }, 832 [IEEE80211_MODE_TURBO_A]= { 1, 2, 2, 47, 0 }, 833 [IEEE80211_MODE_TURBO_G]= { 1, 2, 2, 47, 0 }, 834 [IEEE80211_MODE_STURBO_A]={ 1, 2, 2, 47, 0 }, 835 [IEEE80211_MODE_HALF] = { 2, 2, 3, 47, 0 }, 836 [IEEE80211_MODE_QUARTER]= { 2, 2, 3, 47, 0 }, 837 [IEEE80211_MODE_11NA] = { 2, 2, 3, 47, 0 }, 838 [IEEE80211_MODE_11NG] = { 2, 2, 3, 47, 0 }, 839 }; 840 841 static void 842 _setifsparams(struct wmeParams *wmep, const paramType *phy) 843 { 844 wmep->wmep_aifsn = phy->aifsn; 845 wmep->wmep_logcwmin = phy->logcwmin; 846 wmep->wmep_logcwmax = phy->logcwmax; 847 wmep->wmep_txopLimit = phy->txopLimit; 848 } 849 850 static void 851 setwmeparams(struct ieee80211vap *vap, const char *type, int ac, 852 struct wmeParams *wmep, const paramType *phy) 853 { 854 wmep->wmep_acm = phy->acm; 855 _setifsparams(wmep, phy); 856 857 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 858 "set %s (%s) [acm %u aifsn %u logcwmin %u logcwmax %u txop %u]\n", 859 ieee80211_wme_acnames[ac], type, 860 wmep->wmep_acm, wmep->wmep_aifsn, wmep->wmep_logcwmin, 861 wmep->wmep_logcwmax, wmep->wmep_txopLimit); 862 } 863 864 static void 865 ieee80211_wme_initparams_locked(struct ieee80211vap *vap) 866 { 867 struct ieee80211com *ic = vap->iv_ic; 868 struct ieee80211_wme_state *wme = &ic->ic_wme; 869 const paramType *pPhyParam, *pBssPhyParam; 870 struct wmeParams *wmep; 871 enum ieee80211_phymode mode; 872 int i; 873 874 if ((ic->ic_caps & IEEE80211_C_WME) == 0 || ic->ic_nrunning > 1) 875 return; 876 877 /* 878 * Select mode; we can be called early in which case we 879 * always use auto mode. We know we'll be called when 880 * entering the RUN state with bsschan setup properly 881 * so state will eventually get set correctly 882 */ 883 if (ic->ic_bsschan != IEEE80211_CHAN_ANYC) 884 mode = ieee80211_chan2mode(ic->ic_bsschan); 885 else 886 mode = IEEE80211_MODE_AUTO; 887 for (i = 0; i < WME_NUM_AC; i++) { 888 switch (i) { 889 case WME_AC_BK: 890 pPhyParam = &phyParamForAC_BK[mode]; 891 pBssPhyParam = &phyParamForAC_BK[mode]; 892 break; 893 case WME_AC_VI: 894 pPhyParam = &phyParamForAC_VI[mode]; 895 pBssPhyParam = &bssPhyParamForAC_VI[mode]; 896 break; 897 case WME_AC_VO: 898 pPhyParam = &phyParamForAC_VO[mode]; 899 pBssPhyParam = &bssPhyParamForAC_VO[mode]; 900 break; 901 case WME_AC_BE: 902 default: 903 pPhyParam = &phyParamForAC_BE[mode]; 904 pBssPhyParam = &bssPhyParamForAC_BE[mode]; 905 break; 906 } 907 wmep = &wme->wme_wmeChanParams.cap_wmeParams[i]; 908 if (ic->ic_opmode == IEEE80211_M_HOSTAP) { 909 setwmeparams(vap, "chan", i, wmep, pPhyParam); 910 } else { 911 setwmeparams(vap, "chan", i, wmep, pBssPhyParam); 912 } 913 wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i]; 914 setwmeparams(vap, "bss ", i, wmep, pBssPhyParam); 915 } 916 /* NB: check ic_bss to avoid NULL deref on initial attach */ 917 if (vap->iv_bss != NULL) { 918 /* 919 * Calculate agressive mode switching threshold based 920 * on beacon interval. This doesn't need locking since 921 * we're only called before entering the RUN state at 922 * which point we start sending beacon frames. 923 */ 924 wme->wme_hipri_switch_thresh = 925 (HIGH_PRI_SWITCH_THRESH * vap->iv_bss->ni_intval) / 100; 926 wme->wme_flags &= ~WME_F_AGGRMODE; 927 ieee80211_wme_updateparams(vap); 928 } 929 } 930 931 void 932 ieee80211_wme_initparams(struct ieee80211vap *vap) 933 { 934 ieee80211_wme_initparams_locked(vap); 935 } 936 937 /* 938 * Update WME parameters for ourself and the BSS. 939 */ 940 void 941 ieee80211_wme_updateparams_locked(struct ieee80211vap *vap) 942 { 943 static const paramType aggrParam[IEEE80211_MODE_MAX] = { 944 [IEEE80211_MODE_AUTO] = { 2, 4, 10, 64, 0 }, 945 [IEEE80211_MODE_11A] = { 2, 4, 10, 64, 0 }, 946 [IEEE80211_MODE_11B] = { 2, 5, 10, 64, 0 }, 947 [IEEE80211_MODE_11G] = { 2, 4, 10, 64, 0 }, 948 [IEEE80211_MODE_FH] = { 2, 5, 10, 64, 0 }, 949 [IEEE80211_MODE_TURBO_A] = { 1, 3, 10, 64, 0 }, 950 [IEEE80211_MODE_TURBO_G] = { 1, 3, 10, 64, 0 }, 951 [IEEE80211_MODE_STURBO_A] = { 1, 3, 10, 64, 0 }, 952 [IEEE80211_MODE_HALF] = { 2, 4, 10, 64, 0 }, 953 [IEEE80211_MODE_QUARTER] = { 2, 4, 10, 64, 0 }, 954 [IEEE80211_MODE_11NA] = { 2, 4, 10, 64, 0 }, /* XXXcheck*/ 955 [IEEE80211_MODE_11NG] = { 2, 4, 10, 64, 0 }, /* XXXcheck*/ 956 }; 957 struct ieee80211com *ic = vap->iv_ic; 958 struct ieee80211_wme_state *wme = &ic->ic_wme; 959 const struct wmeParams *wmep; 960 struct wmeParams *chanp, *bssp; 961 enum ieee80211_phymode mode; 962 int i; 963 964 /* 965 * Set up the channel access parameters for the physical 966 * device. First populate the configured settings. 967 */ 968 for (i = 0; i < WME_NUM_AC; i++) { 969 chanp = &wme->wme_chanParams.cap_wmeParams[i]; 970 wmep = &wme->wme_wmeChanParams.cap_wmeParams[i]; 971 chanp->wmep_aifsn = wmep->wmep_aifsn; 972 chanp->wmep_logcwmin = wmep->wmep_logcwmin; 973 chanp->wmep_logcwmax = wmep->wmep_logcwmax; 974 chanp->wmep_txopLimit = wmep->wmep_txopLimit; 975 976 chanp = &wme->wme_bssChanParams.cap_wmeParams[i]; 977 wmep = &wme->wme_wmeBssChanParams.cap_wmeParams[i]; 978 chanp->wmep_aifsn = wmep->wmep_aifsn; 979 chanp->wmep_logcwmin = wmep->wmep_logcwmin; 980 chanp->wmep_logcwmax = wmep->wmep_logcwmax; 981 chanp->wmep_txopLimit = wmep->wmep_txopLimit; 982 } 983 984 /* 985 * Select mode; we can be called early in which case we 986 * always use auto mode. We know we'll be called when 987 * entering the RUN state with bsschan setup properly 988 * so state will eventually get set correctly 989 */ 990 if (ic->ic_bsschan != IEEE80211_CHAN_ANYC) 991 mode = ieee80211_chan2mode(ic->ic_bsschan); 992 else 993 mode = IEEE80211_MODE_AUTO; 994 995 /* 996 * This implements agressive mode as found in certain 997 * vendors' AP's. When there is significant high 998 * priority (VI/VO) traffic in the BSS throttle back BE 999 * traffic by using conservative parameters. Otherwise 1000 * BE uses agressive params to optimize performance of 1001 * legacy/non-QoS traffic. 1002 */ 1003 if ((vap->iv_opmode == IEEE80211_M_HOSTAP && 1004 (wme->wme_flags & WME_F_AGGRMODE) != 0) || 1005 (vap->iv_opmode == IEEE80211_M_STA && 1006 (vap->iv_bss->ni_flags & IEEE80211_NODE_QOS) == 0) || 1007 (vap->iv_flags & IEEE80211_F_WME) == 0) { 1008 chanp = &wme->wme_chanParams.cap_wmeParams[WME_AC_BE]; 1009 bssp = &wme->wme_bssChanParams.cap_wmeParams[WME_AC_BE]; 1010 1011 chanp->wmep_aifsn = bssp->wmep_aifsn = aggrParam[mode].aifsn; 1012 chanp->wmep_logcwmin = bssp->wmep_logcwmin = 1013 aggrParam[mode].logcwmin; 1014 chanp->wmep_logcwmax = bssp->wmep_logcwmax = 1015 aggrParam[mode].logcwmax; 1016 chanp->wmep_txopLimit = bssp->wmep_txopLimit = 1017 (vap->iv_flags & IEEE80211_F_BURST) ? 1018 aggrParam[mode].txopLimit : 0; 1019 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 1020 "update %s (chan+bss) [acm %u aifsn %u logcwmin %u " 1021 "logcwmax %u txop %u]\n", ieee80211_wme_acnames[WME_AC_BE], 1022 chanp->wmep_acm, chanp->wmep_aifsn, chanp->wmep_logcwmin, 1023 chanp->wmep_logcwmax, chanp->wmep_txopLimit); 1024 } 1025 1026 if (vap->iv_opmode == IEEE80211_M_HOSTAP && 1027 ic->ic_sta_assoc < 2 && (wme->wme_flags & WME_F_AGGRMODE) != 0) { 1028 static const uint8_t logCwMin[IEEE80211_MODE_MAX] = { 1029 [IEEE80211_MODE_AUTO] = 3, 1030 [IEEE80211_MODE_11A] = 3, 1031 [IEEE80211_MODE_11B] = 4, 1032 [IEEE80211_MODE_11G] = 3, 1033 [IEEE80211_MODE_FH] = 4, 1034 [IEEE80211_MODE_TURBO_A] = 3, 1035 [IEEE80211_MODE_TURBO_G] = 3, 1036 [IEEE80211_MODE_STURBO_A] = 3, 1037 [IEEE80211_MODE_HALF] = 3, 1038 [IEEE80211_MODE_QUARTER] = 3, 1039 [IEEE80211_MODE_11NA] = 3, 1040 [IEEE80211_MODE_11NG] = 3, 1041 }; 1042 chanp = &wme->wme_chanParams.cap_wmeParams[WME_AC_BE]; 1043 bssp = &wme->wme_bssChanParams.cap_wmeParams[WME_AC_BE]; 1044 1045 chanp->wmep_logcwmin = bssp->wmep_logcwmin = logCwMin[mode]; 1046 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 1047 "update %s (chan+bss) logcwmin %u\n", 1048 ieee80211_wme_acnames[WME_AC_BE], chanp->wmep_logcwmin); 1049 } 1050 if (vap->iv_opmode == IEEE80211_M_HOSTAP) { /* XXX ibss? */ 1051 /* 1052 * Arrange for a beacon update and bump the parameter 1053 * set number so associated stations load the new values. 1054 */ 1055 wme->wme_bssChanParams.cap_info = 1056 (wme->wme_bssChanParams.cap_info+1) & WME_QOSINFO_COUNT; 1057 ieee80211_beacon_notify(vap, IEEE80211_BEACON_WME); 1058 } 1059 1060 wme->wme_update(ic); 1061 1062 IEEE80211_DPRINTF(vap, IEEE80211_MSG_WME, 1063 "%s: WME params updated, cap_info 0x%x\n", __func__, 1064 vap->iv_opmode == IEEE80211_M_STA ? 1065 wme->wme_wmeChanParams.cap_info : 1066 wme->wme_bssChanParams.cap_info); 1067 } 1068 1069 void 1070 ieee80211_wme_updateparams(struct ieee80211vap *vap) 1071 { 1072 struct ieee80211com *ic = vap->iv_ic; 1073 1074 if (ic->ic_caps & IEEE80211_C_WME) { 1075 ieee80211_wme_updateparams_locked(vap); 1076 } 1077 } 1078 1079 static void 1080 parent_updown_task(void *arg, int npending) 1081 { 1082 struct ifnet *parent = arg; 1083 1084 wlan_serialize_enter(); 1085 parent->if_ioctl(parent, SIOCSIFFLAGS, NULL, curthread->td_ucred); 1086 wlan_serialize_exit(); 1087 } 1088 1089 static void 1090 update_mcast_task(void *arg, int npending) 1091 { 1092 struct ieee80211com *ic = arg; 1093 struct ifnet *parent = ic->ic_ifp; 1094 1095 wlan_serialize_enter(); 1096 ic->ic_update_mcast(parent); 1097 wlan_serialize_exit(); 1098 } 1099 1100 static void 1101 update_promisc_task(void *arg, int npending) 1102 { 1103 struct ieee80211com *ic = arg; 1104 struct ifnet *parent = ic->ic_ifp; 1105 1106 wlan_serialize_enter(); 1107 ic->ic_update_promisc(parent); 1108 wlan_serialize_exit(); 1109 } 1110 1111 static void 1112 update_channel_task(void *arg, int npending) 1113 { 1114 struct ieee80211com *ic = arg; 1115 1116 wlan_serialize_enter(); 1117 ic->ic_set_channel(ic); 1118 ieee80211_radiotap_chan_change(ic); 1119 wlan_serialize_exit(); 1120 } 1121 1122 /* 1123 * Block until the parent is in a known state. This is 1124 * used after any operations that dispatch a task (e.g. 1125 * to auto-configure the parent device up/down). 1126 */ 1127 void 1128 ieee80211_waitfor_parent(struct ieee80211com *ic) 1129 { 1130 wlan_assert_serialized(); 1131 wlan_serialize_exit(); /* exit to block */ 1132 taskqueue_block(ic->ic_tq); 1133 ieee80211_draintask(ic, &ic->ic_parent_task); 1134 ieee80211_draintask(ic, &ic->ic_mcast_task); 1135 ieee80211_draintask(ic, &ic->ic_promisc_task); 1136 ieee80211_draintask(ic, &ic->ic_chan_task); 1137 ieee80211_draintask(ic, &ic->ic_bmiss_task); 1138 taskqueue_unblock(ic->ic_tq); 1139 wlan_serialize_enter(); /* then re-enter */ 1140 } 1141 1142 /* 1143 * Start a vap running. If this is the first vap to be 1144 * set running on the underlying device then we 1145 * automatically bring the device up. 1146 */ 1147 void 1148 ieee80211_start_locked(struct ieee80211vap *vap) 1149 { 1150 struct ifnet *ifp = vap->iv_ifp; 1151 struct ieee80211com *ic = vap->iv_ic; 1152 struct ifnet *parent = ic->ic_ifp; 1153 1154 IEEE80211_DPRINTF(vap, 1155 IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, 1156 "start running, %d vaps running\n", ic->ic_nrunning); 1157 1158 if ((ifp->if_flags & IFF_RUNNING) == 0) { 1159 /* 1160 * Mark us running. Note that it's ok to do this first; 1161 * if we need to bring the parent device up we defer that 1162 * to avoid dropping the com lock. We expect the device 1163 * to respond to being marked up by calling back into us 1164 * through ieee80211_start_all at which point we'll come 1165 * back in here and complete the work. 1166 */ 1167 ifp->if_flags |= IFF_RUNNING; 1168 /* 1169 * We are not running; if this we are the first vap 1170 * to be brought up auto-up the parent if necessary. 1171 */ 1172 if (ic->ic_nrunning++ == 0 && 1173 (parent->if_flags & IFF_RUNNING) == 0) { 1174 IEEE80211_DPRINTF(vap, 1175 IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, 1176 "%s: up parent %s\n", __func__, parent->if_xname); 1177 parent->if_flags |= IFF_UP; 1178 ieee80211_runtask(ic, &ic->ic_parent_task); 1179 return; 1180 } 1181 } 1182 /* 1183 * If the parent is up and running, then kick the 1184 * 802.11 state machine as appropriate. 1185 */ 1186 if ((parent->if_flags & IFF_RUNNING) && 1187 vap->iv_roaming != IEEE80211_ROAMING_MANUAL) { 1188 if (vap->iv_opmode == IEEE80211_M_STA) { 1189 #if 0 1190 /* XXX bypasses scan too easily; disable for now */ 1191 /* 1192 * Try to be intelligent about clocking the state 1193 * machine. If we're currently in RUN state then 1194 * we should be able to apply any new state/parameters 1195 * simply by re-associating. Otherwise we need to 1196 * re-scan to select an appropriate ap. 1197 */ 1198 if (vap->iv_state >= IEEE80211_S_RUN) 1199 ieee80211_new_state_locked(vap, 1200 IEEE80211_S_ASSOC, 1); 1201 else 1202 #endif 1203 ieee80211_new_state_locked(vap, 1204 IEEE80211_S_SCAN, 0); 1205 } else { 1206 /* 1207 * For monitor+wds mode there's nothing to do but 1208 * start running. Otherwise if this is the first 1209 * vap to be brought up, start a scan which may be 1210 * preempted if the station is locked to a particular 1211 * channel. 1212 */ 1213 vap->iv_flags_ext |= IEEE80211_FEXT_REINIT; 1214 if (vap->iv_opmode == IEEE80211_M_MONITOR || 1215 vap->iv_opmode == IEEE80211_M_WDS) 1216 ieee80211_new_state_locked(vap, 1217 IEEE80211_S_RUN, -1); 1218 else 1219 ieee80211_new_state_locked(vap, 1220 IEEE80211_S_SCAN, 0); 1221 } 1222 } 1223 } 1224 1225 /* 1226 * Start a single vap. 1227 */ 1228 void 1229 ieee80211_init(void *arg) 1230 { 1231 struct ieee80211vap *vap = arg; 1232 1233 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, 1234 "%s\n", __func__); 1235 1236 ieee80211_start_locked(vap); 1237 } 1238 1239 /* 1240 * Start all runnable vap's on a device. 1241 */ 1242 void 1243 ieee80211_start_all(struct ieee80211com *ic) 1244 { 1245 struct ieee80211vap *vap; 1246 1247 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1248 struct ifnet *ifp = vap->iv_ifp; 1249 if (IFNET_IS_UP_RUNNING(ifp)) /* NB: avoid recursion */ 1250 ieee80211_start_locked(vap); 1251 } 1252 } 1253 1254 /* 1255 * Stop a vap. We force it down using the state machine 1256 * then mark it's ifnet not running. If this is the last 1257 * vap running on the underlying device then we close it 1258 * too to insure it will be properly initialized when the 1259 * next vap is brought up. 1260 */ 1261 void 1262 ieee80211_stop_locked(struct ieee80211vap *vap) 1263 { 1264 struct ieee80211com *ic = vap->iv_ic; 1265 struct ifnet *ifp = vap->iv_ifp; 1266 struct ifnet *parent = ic->ic_ifp; 1267 1268 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, 1269 "stop running, %d vaps running\n", ic->ic_nrunning); 1270 1271 ieee80211_new_state_locked(vap, IEEE80211_S_INIT, -1); 1272 if (ifp->if_flags & IFF_RUNNING) { 1273 ifp->if_flags &= ~IFF_RUNNING; /* mark us stopped */ 1274 if (--ic->ic_nrunning == 0 && 1275 (parent->if_flags & IFF_RUNNING)) { 1276 IEEE80211_DPRINTF(vap, 1277 IEEE80211_MSG_STATE | IEEE80211_MSG_DEBUG, 1278 "down parent %s\n", parent->if_xname); 1279 parent->if_flags &= ~IFF_UP; 1280 ieee80211_runtask(ic, &ic->ic_parent_task); 1281 } 1282 } 1283 } 1284 1285 void 1286 ieee80211_stop(struct ieee80211vap *vap) 1287 { 1288 ieee80211_stop_locked(vap); 1289 } 1290 1291 /* 1292 * Stop all vap's running on a device. 1293 */ 1294 void 1295 ieee80211_stop_all(struct ieee80211com *ic) 1296 { 1297 struct ieee80211vap *vap; 1298 1299 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1300 struct ifnet *ifp = vap->iv_ifp; 1301 if (IFNET_IS_UP_RUNNING(ifp)) /* NB: avoid recursion */ 1302 ieee80211_stop_locked(vap); 1303 } 1304 1305 ieee80211_waitfor_parent(ic); 1306 } 1307 1308 /* 1309 * Stop all vap's running on a device and arrange 1310 * for those that were running to be resumed. 1311 */ 1312 void 1313 ieee80211_suspend_all(struct ieee80211com *ic) 1314 { 1315 struct ieee80211vap *vap; 1316 1317 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1318 struct ifnet *ifp = vap->iv_ifp; 1319 if (IFNET_IS_UP_RUNNING(ifp)) { /* NB: avoid recursion */ 1320 vap->iv_flags_ext |= IEEE80211_FEXT_RESUME; 1321 ieee80211_stop_locked(vap); 1322 } 1323 } 1324 1325 ieee80211_waitfor_parent(ic); 1326 } 1327 1328 /* 1329 * Start all vap's marked for resume. 1330 */ 1331 void 1332 ieee80211_resume_all(struct ieee80211com *ic) 1333 { 1334 struct ieee80211vap *vap; 1335 1336 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1337 struct ifnet *ifp = vap->iv_ifp; 1338 if (!IFNET_IS_UP_RUNNING(ifp) && 1339 (vap->iv_flags_ext & IEEE80211_FEXT_RESUME)) { 1340 vap->iv_flags_ext &= ~IEEE80211_FEXT_RESUME; 1341 ieee80211_start_locked(vap); 1342 } 1343 } 1344 } 1345 1346 void 1347 ieee80211_beacon_miss(struct ieee80211com *ic) 1348 { 1349 if ((ic->ic_flags & IEEE80211_F_SCAN) == 0) { 1350 /* Process in a taskq, the handler may reenter the driver */ 1351 ieee80211_runtask(ic, &ic->ic_bmiss_task); 1352 } 1353 } 1354 1355 static void 1356 beacon_miss_task(void *arg, int npending) 1357 { 1358 struct ieee80211com *ic = arg; 1359 struct ieee80211vap *vap; 1360 1361 wlan_serialize_enter(); 1362 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1363 /* 1364 * We only pass events through for sta vap's in RUN state; 1365 * may be too restrictive but for now this saves all the 1366 * handlers duplicating these checks. 1367 */ 1368 if (vap->iv_opmode == IEEE80211_M_STA && 1369 vap->iv_state >= IEEE80211_S_RUN && 1370 vap->iv_bmiss != NULL) 1371 vap->iv_bmiss(vap); 1372 } 1373 wlan_serialize_exit(); 1374 } 1375 1376 static void 1377 beacon_swmiss_task(void *arg, int npending) 1378 { 1379 struct ieee80211vap *vap = arg; 1380 1381 wlan_serialize_enter(); 1382 if (vap->iv_state == IEEE80211_S_RUN) { 1383 /* XXX Call multiple times if npending > zero? */ 1384 vap->iv_bmiss(vap); 1385 } 1386 wlan_serialize_exit(); 1387 } 1388 1389 /* 1390 * Software beacon miss handling. Check if any beacons 1391 * were received in the last period. If not post a 1392 * beacon miss; otherwise reset the counter. 1393 */ 1394 void 1395 ieee80211_swbmiss_callout(void *arg) 1396 { 1397 struct ieee80211vap *vap = arg; 1398 struct ieee80211com *ic = vap->iv_ic; 1399 1400 wlan_serialize_enter(); 1401 KASSERT(vap->iv_state == IEEE80211_S_RUN, 1402 ("wrong state %d", vap->iv_state)); 1403 1404 if (ic->ic_flags & IEEE80211_F_SCAN) { 1405 /* 1406 * If scanning just ignore and reset state. If we get a 1407 * bmiss after coming out of scan because we haven't had 1408 * time to receive a beacon then we should probe the AP 1409 * before posting a real bmiss (unless iv_bmiss_max has 1410 * been artifiically lowered). A cleaner solution might 1411 * be to disable the timer on scan start/end but to handle 1412 * case of multiple sta vap's we'd need to disable the 1413 * timers of all affected vap's. 1414 */ 1415 vap->iv_swbmiss_count = 0; 1416 } else if (vap->iv_swbmiss_count == 0) { 1417 if (vap->iv_bmiss != NULL) 1418 ieee80211_runtask(ic, &vap->iv_swbmiss_task); 1419 if (vap->iv_bmiss_count == 0) /* don't re-arm timer */ 1420 goto done; 1421 } else { 1422 vap->iv_swbmiss_count = 0; 1423 } 1424 callout_reset(&vap->iv_swbmiss, vap->iv_swbmiss_period, 1425 ieee80211_swbmiss_callout, vap); 1426 done: 1427 wlan_serialize_exit(); 1428 } 1429 1430 /* 1431 * Start an 802.11h channel switch. We record the parameters, 1432 * mark the operation pending, notify each vap through the 1433 * beacon update mechanism so it can update the beacon frame 1434 * contents, and then switch vap's to CSA state to block outbound 1435 * traffic. Devices that handle CSA directly can use the state 1436 * switch to do the right thing so long as they call 1437 * ieee80211_csa_completeswitch when it's time to complete the 1438 * channel change. Devices that depend on the net80211 layer can 1439 * use ieee80211_beacon_update to handle the countdown and the 1440 * channel switch. 1441 */ 1442 void 1443 ieee80211_csa_startswitch(struct ieee80211com *ic, 1444 struct ieee80211_channel *c, int mode, int count) 1445 { 1446 struct ieee80211vap *vap; 1447 1448 ic->ic_csa_newchan = c; 1449 ic->ic_csa_mode = mode; 1450 ic->ic_csa_count = count; 1451 ic->ic_flags |= IEEE80211_F_CSAPENDING; 1452 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1453 if (vap->iv_opmode == IEEE80211_M_HOSTAP || 1454 vap->iv_opmode == IEEE80211_M_IBSS || 1455 vap->iv_opmode == IEEE80211_M_MBSS) 1456 ieee80211_beacon_notify(vap, IEEE80211_BEACON_CSA); 1457 /* switch to CSA state to block outbound traffic */ 1458 if (vap->iv_state == IEEE80211_S_RUN) 1459 ieee80211_new_state_locked(vap, IEEE80211_S_CSA, 0); 1460 } 1461 ieee80211_notify_csa(ic, c, mode, count); 1462 } 1463 1464 static void 1465 csa_completeswitch(struct ieee80211com *ic) 1466 { 1467 struct ieee80211vap *vap; 1468 1469 ic->ic_csa_newchan = NULL; 1470 ic->ic_flags &= ~IEEE80211_F_CSAPENDING; 1471 1472 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) 1473 if (vap->iv_state == IEEE80211_S_CSA) 1474 ieee80211_new_state_locked(vap, IEEE80211_S_RUN, 0); 1475 } 1476 1477 /* 1478 * Complete an 802.11h channel switch started by ieee80211_csa_startswitch. 1479 * We clear state and move all vap's in CSA state to RUN state 1480 * so they can again transmit. 1481 */ 1482 void 1483 ieee80211_csa_completeswitch(struct ieee80211com *ic) 1484 { 1485 KASSERT(ic->ic_flags & IEEE80211_F_CSAPENDING, ("csa not pending")); 1486 1487 ieee80211_setcurchan(ic, ic->ic_csa_newchan); 1488 csa_completeswitch(ic); 1489 } 1490 1491 /* 1492 * Cancel an 802.11h channel switch started by ieee80211_csa_startswitch. 1493 * We clear state and move all vap's in CSA state to RUN state 1494 * so they can again transmit. 1495 */ 1496 void 1497 ieee80211_csa_cancelswitch(struct ieee80211com *ic) 1498 { 1499 csa_completeswitch(ic); 1500 } 1501 1502 /* 1503 * Complete a DFS CAC started by ieee80211_dfs_cac_start. 1504 * We clear state and move all vap's in CAC state to RUN state. 1505 */ 1506 void 1507 ieee80211_cac_completeswitch(struct ieee80211vap *vap0) 1508 { 1509 struct ieee80211com *ic = vap0->iv_ic; 1510 struct ieee80211vap *vap; 1511 1512 /* 1513 * Complete CAC state change for lead vap first; then 1514 * clock all the other vap's waiting. 1515 */ 1516 KASSERT(vap0->iv_state == IEEE80211_S_CAC, 1517 ("wrong state %d", vap0->iv_state)); 1518 ieee80211_new_state_locked(vap0, IEEE80211_S_RUN, 0); 1519 1520 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) 1521 if (vap->iv_state == IEEE80211_S_CAC) 1522 ieee80211_new_state_locked(vap, IEEE80211_S_RUN, 0); 1523 } 1524 1525 /* 1526 * Force all vap's other than the specified vap to the INIT state 1527 * and mark them as waiting for a scan to complete. These vaps 1528 * will be brought up when the scan completes and the scanning vap 1529 * reaches RUN state by wakeupwaiting. 1530 */ 1531 static void 1532 markwaiting(struct ieee80211vap *vap0) 1533 { 1534 struct ieee80211com *ic = vap0->iv_ic; 1535 struct ieee80211vap *vap; 1536 1537 /* 1538 * A vap list entry can not disappear since we are running on the 1539 * taskqueue and a vap destroy will queue and drain another state 1540 * change task. 1541 */ 1542 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1543 if (vap == vap0) 1544 continue; 1545 if (vap->iv_state != IEEE80211_S_INIT) { 1546 /* NB: iv_newstate may drop the lock */ 1547 vap->iv_newstate(vap, IEEE80211_S_INIT, 0); 1548 vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT; 1549 } 1550 } 1551 } 1552 1553 /* 1554 * Wakeup all vap's waiting for a scan to complete. This is the 1555 * companion to markwaiting (above) and is used to coordinate 1556 * multiple vaps scanning. 1557 * This is called from the state taskqueue. 1558 */ 1559 static void 1560 wakeupwaiting(struct ieee80211vap *vap0) 1561 { 1562 struct ieee80211com *ic = vap0->iv_ic; 1563 struct ieee80211vap *vap; 1564 1565 /* 1566 * A vap list entry can not disappear since we are running on the 1567 * taskqueue and a vap destroy will queue and drain another state 1568 * change task. 1569 */ 1570 TAILQ_FOREACH(vap, &ic->ic_vaps, iv_next) { 1571 if (vap == vap0) 1572 continue; 1573 if (vap->iv_flags_ext & IEEE80211_FEXT_SCANWAIT) { 1574 vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANWAIT; 1575 /* NB: sta's cannot go INIT->RUN */ 1576 /* NB: iv_newstate may drop the lock */ 1577 vap->iv_newstate(vap, 1578 vap->iv_opmode == IEEE80211_M_STA ? 1579 IEEE80211_S_SCAN : IEEE80211_S_RUN, 0); 1580 } 1581 } 1582 } 1583 1584 /* 1585 * Handle post state change work common to all operating modes. 1586 */ 1587 static void 1588 ieee80211_newstate_task(void *xvap, int npending) 1589 { 1590 struct ieee80211vap *vap = xvap; 1591 struct ieee80211com *ic; 1592 enum ieee80211_state nstate, ostate; 1593 int arg, rc; 1594 1595 wlan_serialize_enter(); 1596 1597 ic = vap->iv_ic; 1598 nstate = vap->iv_nstate; 1599 arg = vap->iv_nstate_arg; 1600 1601 if (vap->iv_flags_ext & IEEE80211_FEXT_REINIT) { 1602 /* 1603 * We have been requested to drop back to the INIT before 1604 * proceeding to the new state. 1605 */ 1606 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1607 "%s: %s -> %s arg %d\n", __func__, 1608 ieee80211_state_name[vap->iv_state], 1609 ieee80211_state_name[IEEE80211_S_INIT], arg); 1610 vap->iv_newstate(vap, IEEE80211_S_INIT, arg); 1611 vap->iv_flags_ext &= ~IEEE80211_FEXT_REINIT; 1612 } 1613 1614 ostate = vap->iv_state; 1615 if (nstate == IEEE80211_S_SCAN && ostate != IEEE80211_S_INIT) { 1616 /* 1617 * SCAN was forced; e.g. on beacon miss. Force other running 1618 * vap's to INIT state and mark them as waiting for the scan to 1619 * complete. This insures they don't interfere with our 1620 * scanning. Since we are single threaded the vaps can not 1621 * transition again while we are executing. 1622 * 1623 * XXX not always right, assumes ap follows sta 1624 */ 1625 markwaiting(vap); 1626 } 1627 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1628 "%s: %s -> %s arg %d\n", __func__, 1629 ieee80211_state_name[ostate], ieee80211_state_name[nstate], arg); 1630 1631 rc = vap->iv_newstate(vap, nstate, arg); 1632 vap->iv_flags_ext &= ~IEEE80211_FEXT_STATEWAIT; 1633 if (rc != 0) { 1634 /* State transition failed */ 1635 KASSERT(rc != EINPROGRESS, ("iv_newstate was deferred")); 1636 KASSERT(nstate != IEEE80211_S_INIT, 1637 ("INIT state change failed")); 1638 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1639 "%s: %s returned error %d\n", __func__, 1640 ieee80211_state_name[nstate], rc); 1641 goto done; 1642 } 1643 1644 /* No actual transition, skip post processing */ 1645 if (ostate == nstate) 1646 goto done; 1647 1648 if (nstate == IEEE80211_S_RUN) { 1649 /* 1650 * OACTIVE may be set on the vap if the upper layer 1651 * tried to transmit (e.g. IPv6 NDP) before we reach 1652 * RUN state. Clear it and restart xmit. 1653 * 1654 * Note this can also happen as a result of SLEEP->RUN 1655 * (i.e. coming out of power save mode). 1656 */ 1657 ifq_clr_oactive(&vap->iv_ifp->if_snd); 1658 vap->iv_ifp->if_start(vap->iv_ifp); 1659 1660 /* bring up any vaps waiting on us */ 1661 wakeupwaiting(vap); 1662 } else if (nstate == IEEE80211_S_INIT) { 1663 /* 1664 * Flush the scan cache if we did the last scan (XXX?) 1665 * and flush any frames on send queues from this vap. 1666 * Note the mgt q is used only for legacy drivers and 1667 * will go away shortly. 1668 */ 1669 ieee80211_scan_flush(vap); 1670 1671 /* XXX NB: cast for altq */ 1672 ieee80211_flush_ifq((struct ifqueue *)&ic->ic_ifp->if_snd, vap); 1673 } 1674 done: 1675 wlan_serialize_exit(); 1676 } 1677 1678 /* 1679 * Public interface for initiating a state machine change. 1680 * This routine single-threads the request and coordinates 1681 * the scheduling of multiple vaps for the purpose of selecting 1682 * an operating channel. Specifically the following scenarios 1683 * are handled: 1684 * o only one vap can be selecting a channel so on transition to 1685 * SCAN state if another vap is already scanning then 1686 * mark the caller for later processing and return without 1687 * doing anything (XXX? expectations by caller of synchronous operation) 1688 * o only one vap can be doing CAC of a channel so on transition to 1689 * CAC state if another vap is already scanning for radar then 1690 * mark the caller for later processing and return without 1691 * doing anything (XXX? expectations by caller of synchronous operation) 1692 * o if another vap is already running when a request is made 1693 * to SCAN then an operating channel has been chosen; bypass 1694 * the scan and just join the channel 1695 * 1696 * Note that the state change call is done through the iv_newstate 1697 * method pointer so any driver routine gets invoked. The driver 1698 * will normally call back into operating mode-specific 1699 * ieee80211_newstate routines (below) unless it needs to completely 1700 * bypass the state machine (e.g. because the firmware has it's 1701 * own idea how things should work). Bypassing the net80211 layer 1702 * is usually a mistake and indicates lack of proper integration 1703 * with the net80211 layer. 1704 */ 1705 static int 1706 ieee80211_new_state_locked(struct ieee80211vap *vap, 1707 enum ieee80211_state nstate, int arg) 1708 { 1709 struct ieee80211com *ic = vap->iv_ic; 1710 struct ieee80211vap *vp; 1711 enum ieee80211_state ostate; 1712 int nrunning, nscanning; 1713 1714 if (vap->iv_flags_ext & IEEE80211_FEXT_STATEWAIT) { 1715 if (vap->iv_nstate == IEEE80211_S_INIT) { 1716 /* 1717 * XXX The vap is being stopped, do no allow any other 1718 * state changes until this is completed. 1719 */ 1720 return -1; 1721 } else if (vap->iv_state != vap->iv_nstate) { 1722 #if 0 1723 /* Warn if the previous state hasn't completed. */ 1724 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1725 "%s: pending %s -> %s transition lost\n", __func__, 1726 ieee80211_state_name[vap->iv_state], 1727 ieee80211_state_name[vap->iv_nstate]); 1728 #else 1729 /* XXX temporarily enable to identify issues */ 1730 if_printf(vap->iv_ifp, 1731 "%s: pending %s -> %s transition lost\n", 1732 __func__, ieee80211_state_name[vap->iv_state], 1733 ieee80211_state_name[vap->iv_nstate]); 1734 #endif 1735 } 1736 } 1737 1738 nrunning = nscanning = 0; 1739 /* XXX can track this state instead of calculating */ 1740 TAILQ_FOREACH(vp, &ic->ic_vaps, iv_next) { 1741 if (vp != vap) { 1742 if (vp->iv_state >= IEEE80211_S_RUN) 1743 nrunning++; 1744 /* XXX doesn't handle bg scan */ 1745 /* NB: CAC+AUTH+ASSOC treated like SCAN */ 1746 else if (vp->iv_state > IEEE80211_S_INIT) 1747 nscanning++; 1748 } 1749 } 1750 ostate = vap->iv_state; 1751 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1752 "%s: %s -> %s (nrunning %d nscanning %d)\n", __func__, 1753 ieee80211_state_name[ostate], ieee80211_state_name[nstate], 1754 nrunning, nscanning); 1755 switch (nstate) { 1756 case IEEE80211_S_SCAN: 1757 if (ostate == IEEE80211_S_INIT) { 1758 /* 1759 * INIT -> SCAN happens on initial bringup. 1760 */ 1761 KASSERT(!(nscanning && nrunning), 1762 ("%d scanning and %d running", nscanning, nrunning)); 1763 if (nscanning) { 1764 /* 1765 * Someone is scanning, defer our state 1766 * change until the work has completed. 1767 */ 1768 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1769 "%s: defer %s -> %s\n", 1770 __func__, ieee80211_state_name[ostate], 1771 ieee80211_state_name[nstate]); 1772 vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT; 1773 return 0; 1774 } 1775 if (nrunning) { 1776 /* 1777 * Someone is operating; just join the channel 1778 * they have chosen. 1779 */ 1780 /* XXX kill arg? */ 1781 /* XXX check each opmode, adhoc? */ 1782 if (vap->iv_opmode == IEEE80211_M_STA) 1783 nstate = IEEE80211_S_SCAN; 1784 else 1785 nstate = IEEE80211_S_RUN; 1786 #ifdef IEEE80211_DEBUG 1787 if (nstate != IEEE80211_S_SCAN) { 1788 IEEE80211_DPRINTF(vap, 1789 IEEE80211_MSG_STATE, 1790 "%s: override, now %s -> %s\n", 1791 __func__, 1792 ieee80211_state_name[ostate], 1793 ieee80211_state_name[nstate]); 1794 } 1795 #endif 1796 } 1797 } 1798 break; 1799 case IEEE80211_S_RUN: 1800 if (vap->iv_opmode == IEEE80211_M_WDS && 1801 (vap->iv_flags_ext & IEEE80211_FEXT_WDSLEGACY) && 1802 nscanning) { 1803 /* 1804 * Legacy WDS with someone else scanning; don't 1805 * go online until that completes as we should 1806 * follow the other vap to the channel they choose. 1807 */ 1808 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1809 "%s: defer %s -> %s (legacy WDS)\n", __func__, 1810 ieee80211_state_name[ostate], 1811 ieee80211_state_name[nstate]); 1812 vap->iv_flags_ext |= IEEE80211_FEXT_SCANWAIT; 1813 return 0; 1814 } 1815 if (vap->iv_opmode == IEEE80211_M_HOSTAP && 1816 IEEE80211_IS_CHAN_DFS(ic->ic_bsschan) && 1817 (vap->iv_flags_ext & IEEE80211_FEXT_DFS) && 1818 !IEEE80211_IS_CHAN_CACDONE(ic->ic_bsschan)) { 1819 /* 1820 * This is a DFS channel, transition to CAC state 1821 * instead of RUN. This allows us to initiate 1822 * Channel Availability Check (CAC) as specified 1823 * by 11h/DFS. 1824 */ 1825 nstate = IEEE80211_S_CAC; 1826 IEEE80211_DPRINTF(vap, IEEE80211_MSG_STATE, 1827 "%s: override %s -> %s (DFS)\n", __func__, 1828 ieee80211_state_name[ostate], 1829 ieee80211_state_name[nstate]); 1830 } 1831 break; 1832 case IEEE80211_S_INIT: 1833 /* cancel any scan in progress */ 1834 ieee80211_cancel_scan(vap); 1835 if (ostate == IEEE80211_S_INIT ) { 1836 /* XXX don't believe this */ 1837 /* INIT -> INIT. nothing to do */ 1838 vap->iv_flags_ext &= ~IEEE80211_FEXT_SCANWAIT; 1839 } 1840 /* fall thru... */ 1841 default: 1842 break; 1843 } 1844 /* defer the state change to a thread */ 1845 vap->iv_nstate = nstate; 1846 vap->iv_nstate_arg = arg; 1847 vap->iv_flags_ext |= IEEE80211_FEXT_STATEWAIT; 1848 ieee80211_runtask(ic, &vap->iv_nstate_task); 1849 return EINPROGRESS; 1850 } 1851 1852 int 1853 ieee80211_new_state(struct ieee80211vap *vap, 1854 enum ieee80211_state nstate, int arg) 1855 { 1856 int rc; 1857 1858 rc = ieee80211_new_state_locked(vap, nstate, arg); 1859 return rc; 1860 } 1861