1 /* 2 * Copyright (c) 1997, 1998, 1999 3 * Bill Paul <wpaul@ctr.columbia.edu>. All rights reserved. 4 * 5 * Redistribution and use in source and binary forms, with or without 6 * modification, are permitted provided that the following conditions 7 * are met: 8 * 1. Redistributions of source code must retain the above copyright 9 * notice, this list of conditions and the following disclaimer. 10 * 2. Redistributions in binary form must reproduce the above copyright 11 * notice, this list of conditions and the following disclaimer in the 12 * documentation and/or other materials provided with the distribution. 13 * 3. All advertising materials mentioning features or use of this software 14 * must display the following acknowledgement: 15 * This product includes software developed by Bill Paul. 16 * 4. Neither the name of the author nor the names of any co-contributors 17 * may be used to endorse or promote products derived from this software 18 * without specific prior written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND 21 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 22 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 23 * ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 25 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 26 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 27 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 28 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 29 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 30 * THE POSSIBILITY OF SUCH DAMAGE. 31 * 32 * $FreeBSD: src/sys/dev/mii/rlphy.c,v 1.2.2.4 2002/11/08 21:53:49 semenu Exp $ 33 * $DragonFly: src/sys/dev/netif/mii_layer/rlphy.c,v 1.8 2005/10/24 16:55:40 dillon Exp $ 34 */ 35 36 /* 37 * driver for RealTek 8139 internal PHYs 38 */ 39 40 #include <sys/param.h> 41 #include <sys/systm.h> 42 #include <sys/kernel.h> 43 #include <sys/socket.h> 44 #include <sys/bus.h> 45 46 #include <net/if.h> 47 #include <net/if_arp.h> 48 #include <net/if_media.h> 49 50 #include "mii.h" 51 #include "miivar.h" 52 #include "miidevs.h" 53 54 #include <machine/bus.h> 55 #include "../rl/if_rlreg.h" 56 57 #include "miibus_if.h" 58 59 static int rlphy_probe (device_t); 60 static int rlphy_attach (device_t); 61 static int rlphy_detach (device_t); 62 63 static device_method_t rlphy_methods[] = { 64 /* device interface */ 65 DEVMETHOD(device_probe, rlphy_probe), 66 DEVMETHOD(device_attach, rlphy_attach), 67 DEVMETHOD(device_detach, rlphy_detach), 68 DEVMETHOD(device_shutdown, bus_generic_shutdown), 69 { 0, 0 } 70 }; 71 72 static devclass_t rlphy_devclass; 73 74 static driver_t rlphy_driver = { 75 "rlphy", 76 rlphy_methods, 77 sizeof(struct mii_softc) 78 }; 79 80 DRIVER_MODULE(rlphy, miibus, rlphy_driver, rlphy_devclass, 0, 0); 81 82 int rlphy_service (struct mii_softc *, struct mii_data *, int); 83 void rlphy_status (struct mii_softc *); 84 85 static int rlphy_probe(dev) 86 device_t dev; 87 { 88 struct mii_attach_args *ma; 89 device_t parent; 90 91 ma = device_get_ivars(dev); 92 parent = device_get_parent(device_get_parent(dev)); 93 94 /* Test for RealTek 8201L PHY */ 95 if (MII_OUI(ma->mii_id1, ma->mii_id2) == MII_OUI_REALTEK && 96 MII_MODEL(ma->mii_id2) == MII_MODEL_REALTEK_RTL8201L) { 97 device_set_desc(dev, MII_STR_REALTEK_RTL8201L); 98 return(0); 99 } 100 101 /* 102 * RealTek PHY doesn't have vendor/device ID registers: 103 * the rl driver fakes up a return value of all zeros. 104 */ 105 if (MII_OUI(ma->mii_id1, ma->mii_id2) != 0 || 106 MII_MODEL(ma->mii_id2) != 0) 107 return (ENXIO); 108 109 /* 110 * Make sure the parent is an `rl'. 111 */ 112 if (strcmp(device_get_name(parent), "rl") != 0) 113 return (ENXIO); 114 115 device_set_desc(dev, "RealTek internal media interface"); 116 117 return (0); 118 } 119 120 static int rlphy_attach(dev) 121 device_t dev; 122 { 123 struct mii_softc *sc; 124 struct mii_attach_args *ma; 125 struct mii_data *mii; 126 127 sc = device_get_softc(dev); 128 ma = device_get_ivars(dev); 129 mii_softc_init(sc, ma); 130 sc->mii_dev = device_get_parent(dev); 131 mii = device_get_softc(sc->mii_dev); 132 133 /* 134 * The RealTek PHY can never be isolated, so never allow non-zero 135 * instances! 136 */ 137 if (mii->mii_instance != 0) { 138 device_printf(dev, "ignoring this PHY, non-zero instance\n"); 139 return(ENXIO); 140 } 141 142 LIST_INSERT_HEAD(&mii->mii_phys, sc, mii_list); 143 144 sc->mii_inst = mii->mii_instance; 145 sc->mii_service = rlphy_service; 146 sc->mii_pdata = mii; 147 mii->mii_instance++; 148 149 sc->mii_flags |= MIIF_NOISOLATE; 150 151 #define ADD(m, c) ifmedia_add(&mii->mii_media, (m), (c), NULL) 152 153 #if 0 /* See above. */ 154 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_NONE, 0, sc->mii_inst), 155 BMCR_ISO); 156 #endif 157 158 ADD(IFM_MAKEWORD(IFM_ETHER, IFM_100_TX, IFM_LOOP, sc->mii_inst), 159 BMCR_LOOP|BMCR_S100); 160 161 mii_phy_reset(sc); 162 163 sc->mii_capabilities = 164 PHY_READ(sc, MII_BMSR) & ma->mii_capmask; 165 device_printf(dev, " "); 166 if ((sc->mii_capabilities & BMSR_MEDIAMASK) == 0) 167 printf("no media present"); 168 else 169 mii_add_media(sc, sc->mii_capabilities); 170 printf("\n"); 171 #undef ADD 172 MIIBUS_MEDIAINIT(sc->mii_dev); 173 return(0); 174 } 175 176 static int rlphy_detach(dev) 177 device_t dev; 178 { 179 struct mii_softc *sc; 180 struct mii_data *mii; 181 182 sc = device_get_softc(dev); 183 mii = device_get_softc(device_get_softc(dev)); 184 mii_phy_auto_stop(sc); 185 sc->mii_dev = NULL; 186 LIST_REMOVE(sc, mii_list); 187 188 return(0); 189 } 190 191 int 192 rlphy_service(sc, mii, cmd) 193 struct mii_softc *sc; 194 struct mii_data *mii; 195 int cmd; 196 { 197 struct ifmedia_entry *ife = mii->mii_media.ifm_cur; 198 199 /* 200 * We can't isolate the RealTek PHY, so it has to be the only one! 201 */ 202 if (IFM_INST(ife->ifm_media) != sc->mii_inst) 203 panic("rlphy_service: can't isolate RealTek PHY"); 204 205 switch (cmd) { 206 case MII_POLLSTAT: 207 break; 208 209 case MII_MEDIACHG: 210 /* 211 * If the interface is not up, don't do anything. 212 */ 213 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 214 break; 215 216 switch (IFM_SUBTYPE(ife->ifm_media)) { 217 case IFM_AUTO: 218 /* 219 * If we're already in auto mode, just return. 220 */ 221 if (PHY_READ(sc, MII_BMCR) & BMCR_AUTOEN) 222 return (0); 223 (void) mii_phy_auto(sc, 0); 224 break; 225 case IFM_100_T4: 226 /* 227 * XXX Not supported as a manual setting right now. 228 */ 229 return (EINVAL); 230 default: 231 /* 232 * BMCR data is stored in the ifmedia entry. 233 */ 234 PHY_WRITE(sc, MII_ANAR, 235 mii_anar(ife->ifm_media)); 236 PHY_WRITE(sc, MII_BMCR, ife->ifm_data); 237 } 238 break; 239 240 case MII_TICK: 241 /* 242 * Only used for autonegotiation. 243 */ 244 if (IFM_SUBTYPE(ife->ifm_media) != IFM_AUTO) 245 return (0); 246 247 /* 248 * Is the interface even up? 249 */ 250 if ((mii->mii_ifp->if_flags & IFF_UP) == 0) 251 return (0); 252 253 /* 254 * Only retry autonegotiation every 5 seconds. 255 */ 256 if (++sc->mii_ticks != 5) 257 return (0); 258 259 sc->mii_ticks = 0; 260 261 /* 262 * The RealTek PHY's autonegotiation doesn't need to be 263 * kicked; it continues in the background. 264 */ 265 break; 266 } 267 268 /* Update the media status. */ 269 rlphy_status(sc); 270 271 /* Callback if something changed. */ 272 if (sc->mii_active != mii->mii_media_active || cmd == MII_MEDIACHG) { 273 MIIBUS_STATCHG(sc->mii_dev); 274 sc->mii_active = mii->mii_media_active; 275 } 276 return (0); 277 } 278 279 void 280 rlphy_status(phy) 281 struct mii_softc *phy; 282 { 283 struct mii_data *mii = phy->mii_pdata; 284 int bmsr, bmcr, anlpar; 285 device_t parent; 286 287 mii->mii_media_status = IFM_AVALID; 288 mii->mii_media_active = IFM_ETHER; 289 290 bmsr = PHY_READ(phy, MII_BMSR) | PHY_READ(phy, MII_BMSR); 291 if (bmsr & BMSR_LINK) 292 mii->mii_media_status |= IFM_ACTIVE; 293 294 bmcr = PHY_READ(phy, MII_BMCR); 295 if (bmcr & BMCR_ISO) { 296 mii->mii_media_active |= IFM_NONE; 297 mii->mii_media_status = 0; 298 return; 299 } 300 301 if (bmcr & BMCR_LOOP) 302 mii->mii_media_active |= IFM_LOOP; 303 304 if (bmcr & BMCR_AUTOEN) { 305 /* 306 * NWay autonegotiation takes the highest-order common 307 * bit of the ANAR and ANLPAR (i.e. best media advertised 308 * both by us and our link partner). 309 */ 310 if ((bmsr & BMSR_ACOMP) == 0) { 311 /* Erg, still trying, I guess... */ 312 mii->mii_media_active |= IFM_NONE; 313 return; 314 } 315 316 if ((anlpar = PHY_READ(phy, MII_ANAR) & 317 PHY_READ(phy, MII_ANLPAR))) { 318 if (anlpar & ANLPAR_T4) 319 mii->mii_media_active |= IFM_100_T4; 320 else if (anlpar & ANLPAR_TX_FD) 321 mii->mii_media_active |= IFM_100_TX|IFM_FDX; 322 else if (anlpar & ANLPAR_TX) 323 mii->mii_media_active |= IFM_100_TX; 324 else if (anlpar & ANLPAR_10_FD) 325 mii->mii_media_active |= IFM_10_T|IFM_FDX; 326 else if (anlpar & ANLPAR_10) 327 mii->mii_media_active |= IFM_10_T; 328 else 329 mii->mii_media_active |= IFM_NONE; 330 return; 331 } 332 /* 333 * If the other side doesn't support NWAY, then the 334 * best we can do is determine if we have a 10Mbps or 335 * 100Mbps link. There's no way to know if the link 336 * is full or half duplex, so we default to half duplex 337 * and hope that the user is clever enough to manually 338 * change the media settings if we're wrong. 339 */ 340 341 342 /* 343 * The RealTek PHY supports non-NWAY link speed 344 * detection, however it does not report the link 345 * detection results via the ANLPAR or BMSR registers. 346 * (What? RealTek doesn't do things the way everyone 347 * else does? I'm just shocked, shocked I tell you.) 348 * To determine the link speed, we have to do one 349 * of two things: 350 * 351 * - If this is a standalone RealTek RTL8201(L) PHY, 352 * we can determine the link speed by testing bit 0 353 * in the magic, vendor-specific register at offset 354 * 0x19. 355 * 356 * - If this is a RealTek MAC with integrated PHY, we 357 * can test the 'SPEED10' bit of the MAC's media status 358 * register. 359 */ 360 parent = device_get_parent(phy->mii_dev); 361 if (strcmp(device_get_name(parent), "rl") != 0) { 362 if (PHY_READ(phy, 0x0019) & 0x01) 363 mii->mii_media_active |= IFM_100_TX; 364 else 365 mii->mii_media_active |= IFM_10_T; 366 } else { 367 if (PHY_READ(phy, RL_MEDIASTAT) & 368 RL_MEDIASTAT_SPEED10) 369 mii->mii_media_active |= IFM_10_T; 370 else 371 mii->mii_media_active |= IFM_100_TX; 372 } 373 374 } else 375 mii->mii_media_active = mii_media_from_bmcr(bmcr); 376 } 377