1 /* 2 * Copyright (c) 2009 The DragonFly Project. All rights reserved. 3 * 4 * This code is derived from software contributed to The DragonFly Project 5 * by Matthew Dillon <dillon@backplane.com> 6 * 7 * Redistribution and use in source and binary forms, with or without 8 * modification, are permitted provided that the following conditions 9 * are met: 10 * 11 * 1. Redistributions of source code must retain the above copyright 12 * notice, this list of conditions and the following disclaimer. 13 * 2. Redistributions in binary form must reproduce the above copyright 14 * notice, this list of conditions and the following disclaimer in 15 * the documentation and/or other materials provided with the 16 * distribution. 17 * 3. Neither the name of The DragonFly Project nor the names of its 18 * contributors may be used to endorse or promote products derived 19 * from this software without specific, prior written permission. 20 * 21 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 22 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 23 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 24 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 25 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 26 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 27 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 28 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 29 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 30 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 31 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 32 * SUCH DAMAGE. 33 * 34 * 35 * Copyright (c) 2007 David Gwynne <dlg@openbsd.org> 36 * 37 * Permission to use, copy, modify, and distribute this software for any 38 * purpose with or without fee is hereby granted, provided that the above 39 * copyright notice and this permission notice appear in all copies. 40 * 41 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 42 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 43 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 44 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 45 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 46 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 47 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 48 * 49 * $OpenBSD: atascsi.c,v 1.64 2009/02/16 21:19:06 miod Exp $ 50 * $DragonFly$ 51 */ 52 /* 53 * Implement each SATA port as its own SCSI bus on CAM. This way we can 54 * implement future port multiplier features as individual devices on the 55 * bus. 56 * 57 * Much of the cdb<->xa conversion code was taken from OpenBSD, the rest 58 * was written natively for DragonFly. 59 */ 60 61 #include "ahci.h" 62 63 static void ahci_xpt_action(struct cam_sim *sim, union ccb *ccb); 64 static void ahci_xpt_poll(struct cam_sim *sim); 65 static void ahci_xpt_scsi_disk_io(struct ahci_port *ap, 66 struct ata_port *at, union ccb *ccb); 67 static void ahci_xpt_scsi_atapi_io(struct ahci_port *ap, 68 struct ata_port *at, union ccb *ccb); 69 static void ahci_xpt_page_inquiry(struct ahci_port *ap, 70 struct ata_port *at, union ccb *ccb); 71 72 static void ahci_ata_complete_disk_rw(struct ata_xfer *xa); 73 static void ahci_ata_complete_disk_synchronize_cache(struct ata_xfer *xa); 74 static void ahci_atapi_complete_cmd(struct ata_xfer *xa); 75 static void ahci_ata_dummy_sense(struct scsi_sense_data *sense_data); 76 static void ahci_ata_atapi_sense(struct ata_fis_d2h *rfis, 77 struct scsi_sense_data *sense_data); 78 79 static int ahci_cam_probe_disk(struct ahci_port *ap, struct ata_port *at); 80 static int ahci_cam_probe_atapi(struct ahci_port *ap, struct ata_port *at); 81 static int ahci_set_xfer(struct ahci_port *ap, struct ata_port *atx); 82 static void ahci_ata_dummy_done(struct ata_xfer *xa); 83 static void ata_fix_identify(struct ata_identify *id); 84 static void ahci_cam_rescan(struct ahci_port *ap); 85 static void ahci_strip_string(const char **basep, int *lenp); 86 87 int 88 ahci_cam_attach(struct ahci_port *ap) 89 { 90 struct cam_devq *devq; 91 struct cam_sim *sim; 92 int error; 93 int unit; 94 95 /* 96 * We want at least one ccb to be available for error processing 97 * so don't let CAM use more then ncmds - 1. 98 */ 99 unit = device_get_unit(ap->ap_sc->sc_dev); 100 if (ap->ap_sc->sc_ncmds > 1) 101 devq = cam_simq_alloc(ap->ap_sc->sc_ncmds - 1); 102 else 103 devq = cam_simq_alloc(ap->ap_sc->sc_ncmds); 104 if (devq == NULL) { 105 return (ENOMEM); 106 } 107 sim = cam_sim_alloc(ahci_xpt_action, ahci_xpt_poll, "ahci", 108 (void *)ap, unit, &sim_mplock, 1, 1, devq); 109 cam_simq_release(devq); 110 if (sim == NULL) { 111 return (ENOMEM); 112 } 113 ap->ap_sim = sim; 114 ahci_os_unlock_port(ap); 115 error = xpt_bus_register(ap->ap_sim, ap->ap_num); 116 ahci_os_lock_port(ap); 117 if (error != CAM_SUCCESS) { 118 ahci_cam_detach(ap); 119 return (EINVAL); 120 } 121 ap->ap_flags |= AP_F_BUS_REGISTERED; 122 123 if (ap->ap_probe == ATA_PROBE_NEED_IDENT) 124 error = ahci_cam_probe(ap, NULL); 125 else 126 error = 0; 127 if (error) { 128 ahci_cam_detach(ap); 129 return (EIO); 130 } 131 ap->ap_flags |= AP_F_CAM_ATTACHED; 132 133 return(0); 134 } 135 136 /* 137 * The state of the port has changed. 138 * 139 * If at is NULL the physical port has changed state. 140 * If at is non-NULL a particular target behind a PM has changed state. 141 * 142 * If found is -1 the target state must be queued to a non-interrupt context. 143 * (only works with at == NULL). 144 * 145 * If found is 0 the target was removed. 146 * If found is 1 the target was inserted. 147 */ 148 void 149 ahci_cam_changed(struct ahci_port *ap, struct ata_port *atx, int found) 150 { 151 struct cam_path *tmppath; 152 int status; 153 int target; 154 155 target = atx ? atx->at_target : CAM_TARGET_WILDCARD; 156 157 if (ap->ap_sim == NULL) 158 return; 159 if (found == CAM_TARGET_WILDCARD) { 160 status = xpt_create_path(&tmppath, NULL, 161 cam_sim_path(ap->ap_sim), 162 target, CAM_LUN_WILDCARD); 163 if (status != CAM_REQ_CMP) 164 return; 165 ahci_cam_rescan(ap); 166 } else { 167 status = xpt_create_path(&tmppath, NULL, 168 cam_sim_path(ap->ap_sim), 169 target, 170 CAM_LUN_WILDCARD); 171 if (status != CAM_REQ_CMP) 172 return; 173 #if 0 174 /* 175 * This confuses CAM 176 */ 177 if (found) 178 xpt_async(AC_FOUND_DEVICE, tmppath, NULL); 179 else 180 xpt_async(AC_LOST_DEVICE, tmppath, NULL); 181 #endif 182 } 183 xpt_free_path(tmppath); 184 } 185 186 void 187 ahci_cam_detach(struct ahci_port *ap) 188 { 189 int error; 190 191 if ((ap->ap_flags & AP_F_CAM_ATTACHED) == 0) 192 return; 193 get_mplock(); 194 if (ap->ap_sim) { 195 xpt_freeze_simq(ap->ap_sim, 1); 196 } 197 if (ap->ap_flags & AP_F_BUS_REGISTERED) { 198 error = xpt_bus_deregister(cam_sim_path(ap->ap_sim)); 199 KKASSERT(error == CAM_REQ_CMP); 200 ap->ap_flags &= ~AP_F_BUS_REGISTERED; 201 } 202 if (ap->ap_sim) { 203 cam_sim_free(ap->ap_sim); 204 ap->ap_sim = NULL; 205 } 206 rel_mplock(); 207 ap->ap_flags &= ~AP_F_CAM_ATTACHED; 208 } 209 210 /* 211 * Once the AHCI port has been attached we need to probe for a device or 212 * devices on the port and setup various options. 213 * 214 * If at is NULL we are probing the direct-attached device on the port, 215 * which may or may not be a port multiplier. 216 */ 217 int 218 ahci_cam_probe(struct ahci_port *ap, struct ata_port *atx) 219 { 220 struct ata_port *at; 221 struct ata_xfer *xa; 222 u_int64_t capacity; 223 u_int64_t capacity_bytes; 224 int model_len; 225 int firmware_len; 226 int serial_len; 227 int error; 228 int devncqdepth; 229 int i; 230 const char *model_id; 231 const char *firmware_id; 232 const char *serial_id; 233 const char *wcstr; 234 const char *rastr; 235 const char *scstr; 236 const char *type; 237 238 error = EIO; 239 240 /* 241 * Delayed CAM attachment for initial probe, sim may be NULL 242 */ 243 if (ap->ap_sim == NULL) 244 return(0); 245 246 /* 247 * A NULL atx indicates a probe of the directly connected device. 248 * A non-NULL atx indicates a device connected via a port multiplier. 249 * We need to preserve atx for calls to ahci_ata_get_xfer(). 250 * 251 * at is always non-NULL. For directly connected devices we supply 252 * an (at) pointing to target 0. 253 */ 254 if (atx == NULL) { 255 at = ap->ap_ata[0]; /* direct attached - device 0 */ 256 if (ap->ap_type == ATA_PORT_T_PM) { 257 kprintf("%s: Found Port Multiplier\n", 258 ATANAME(ap, atx)); 259 return (0); 260 } 261 at->at_type = ap->ap_type; 262 } else { 263 at = atx; 264 if (atx->at_type == ATA_PORT_T_PM) { 265 kprintf("%s: Bogus device, reducing port count to %d\n", 266 ATANAME(ap, atx), atx->at_target); 267 if (ap->ap_pmcount > atx->at_target) 268 ap->ap_pmcount = atx->at_target; 269 goto err; 270 } 271 } 272 if (ap->ap_type == ATA_PORT_T_NONE) 273 goto err; 274 if (at->at_type == ATA_PORT_T_NONE) 275 goto err; 276 277 /* 278 * Issue identify, saving the result 279 */ 280 xa = ahci_ata_get_xfer(ap, atx); 281 xa->complete = ahci_ata_dummy_done; 282 xa->data = &at->at_identify; 283 xa->datalen = sizeof(at->at_identify); 284 xa->flags = ATA_F_READ | ATA_F_PIO | ATA_F_POLL; 285 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 286 287 switch(at->at_type) { 288 case ATA_PORT_T_DISK: 289 xa->fis->command = ATA_C_IDENTIFY; 290 type = "DISK"; 291 break; 292 case ATA_PORT_T_ATAPI: 293 xa->fis->command = ATA_C_ATAPI_IDENTIFY; 294 xa->flags |= ATA_F_AUTOSENSE; 295 type = "ATAPI"; 296 break; 297 default: 298 xa->fis->command = ATA_C_ATAPI_IDENTIFY; 299 type = "UNKNOWN(ATAPI?)"; 300 break; 301 } 302 xa->fis->features = 0; 303 xa->fis->device = 0; 304 xa->timeout = 1000; 305 306 if (ahci_ata_cmd(xa) != ATA_S_COMPLETE) { 307 kprintf("%s: Detected %s device but unable to IDENTIFY\n", 308 ATANAME(ap, atx), type); 309 ahci_ata_put_xfer(xa); 310 goto err; 311 } 312 ahci_ata_put_xfer(xa); 313 314 ata_fix_identify(&at->at_identify); 315 316 /* 317 * Read capacity using SATA probe info. 318 */ 319 if (le16toh(at->at_identify.cmdset83) & 0x0400) { 320 /* LBA48 feature set supported */ 321 capacity = 0; 322 for (i = 3; i >= 0; --i) { 323 capacity <<= 16; 324 capacity += 325 le16toh(at->at_identify.addrsecxt[i]); 326 } 327 } else { 328 capacity = le16toh(at->at_identify.addrsec[1]); 329 capacity <<= 16; 330 capacity += le16toh(at->at_identify.addrsec[0]); 331 } 332 if (capacity == 0) 333 capacity = 1024 * 1024 / 512; 334 at->at_capacity = capacity; 335 if (atx == NULL) 336 ap->ap_probe = ATA_PROBE_GOOD; 337 338 capacity_bytes = capacity * 512; 339 340 /* 341 * Negotiate NCQ, throw away any ata_xfer's beyond the negotiated 342 * number of slots and limit the number of CAM ccb's to one less 343 * so we always have a slot available for recovery. 344 * 345 * NCQ is not used if ap_ncqdepth is 1 or the host controller does 346 * not support it, and in that case the driver can handle extra 347 * ccb's. 348 * 349 * NCQ is currently used only with direct-attached disks. It is 350 * not used with port multipliers or direct-attached ATAPI devices. 351 * 352 * Remember at least one extra CCB needs to be reserved for the 353 * error ccb. 354 */ 355 if ((ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) && 356 ap->ap_type == ATA_PORT_T_DISK && 357 (le16toh(at->at_identify.satacap) & (1 << 8))) { 358 at->at_ncqdepth = (le16toh(at->at_identify.qdepth) & 0x1F) + 1; 359 devncqdepth = at->at_ncqdepth; 360 if (at->at_ncqdepth > ap->ap_sc->sc_ncmds) 361 at->at_ncqdepth = ap->ap_sc->sc_ncmds; 362 if (at->at_ncqdepth > 1) { 363 for (i = 0; i < ap->ap_sc->sc_ncmds; ++i) { 364 xa = ahci_ata_get_xfer(ap, atx); 365 if (xa->tag < at->at_ncqdepth) { 366 xa->state = ATA_S_COMPLETE; 367 ahci_ata_put_xfer(xa); 368 } 369 } 370 if (at->at_ncqdepth >= ap->ap_sc->sc_ncmds) { 371 cam_devq_resize(ap->ap_sim->devq, 372 at->at_ncqdepth - 1); 373 } 374 } 375 } else { 376 devncqdepth = 0; 377 } 378 379 model_len = sizeof(at->at_identify.model); 380 model_id = at->at_identify.model; 381 ahci_strip_string(&model_id, &model_len); 382 383 firmware_len = sizeof(at->at_identify.firmware); 384 firmware_id = at->at_identify.firmware; 385 ahci_strip_string(&firmware_id, &firmware_len); 386 387 serial_len = sizeof(at->at_identify.serial); 388 serial_id = at->at_identify.serial; 389 ahci_strip_string(&serial_id, &serial_len); 390 391 /* 392 * Generate informatiive strings. 393 * 394 * NOTE: We do not automatically set write caching, lookahead, 395 * or the security state for ATAPI devices. 396 */ 397 if (at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) { 398 if (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE) 399 wcstr = "enabled"; 400 else if (at->at_type == ATA_PORT_T_ATAPI) 401 wcstr = "disabled"; 402 else 403 wcstr = "enabling"; 404 } else { 405 wcstr = "notsupp"; 406 } 407 408 if (at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) { 409 if (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD) 410 rastr = "enabled"; 411 else if (at->at_type == ATA_PORT_T_ATAPI) 412 rastr = "disabled"; 413 else 414 rastr = "enabling"; 415 } else { 416 rastr = "notsupp"; 417 } 418 419 if (at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) { 420 if (at->at_identify.securestatus & ATA_SECURE_FROZEN) 421 scstr = "frozen"; 422 else if (at->at_type == ATA_PORT_T_ATAPI) 423 scstr = "unfrozen"; 424 else if (AhciNoFeatures & (1 << ap->ap_num)) 425 scstr = "<disabled>"; 426 else 427 scstr = "freezing"; 428 } else { 429 scstr = "notsupp"; 430 } 431 432 kprintf("%s: Found %s \"%*.*s %*.*s\" serial=\"%*.*s\"\n" 433 "%s: tags=%d/%d satacap=%04x satafea=%04x NCQ=%s " 434 "capacity=%lld.%02dMB\n", 435 436 ATANAME(ap, atx), 437 type, 438 model_len, model_len, model_id, 439 firmware_len, firmware_len, firmware_id, 440 serial_len, serial_len, serial_id, 441 442 ATANAME(ap, atx), 443 devncqdepth, ap->ap_sc->sc_ncmds, 444 at->at_identify.satacap, 445 at->at_identify.satafsup, 446 (at->at_ncqdepth > 1 ? "YES" : "NO"), 447 (long long)capacity_bytes / (1024 * 1024), 448 (int)(capacity_bytes % (1024 * 1024)) * 100 / (1024 * 1024) 449 ); 450 kprintf("%s: f85=%04x f86=%04x f87=%04x WC=%s RA=%s SEC=%s\n", 451 ATANAME(ap, atx), 452 at->at_identify.features85, 453 at->at_identify.features86, 454 at->at_identify.features87, 455 wcstr, 456 rastr, 457 scstr 458 ); 459 460 /* 461 * Additional type-specific probing 462 */ 463 switch(at->at_type) { 464 case ATA_PORT_T_DISK: 465 error = ahci_cam_probe_disk(ap, atx); 466 break; 467 case ATA_PORT_T_ATAPI: 468 error = ahci_cam_probe_atapi(ap, atx); 469 break; 470 default: 471 error = EIO; 472 break; 473 } 474 err: 475 if (error) { 476 at->at_probe = ATA_PROBE_FAILED; 477 if (atx == NULL) 478 ap->ap_probe = at->at_probe; 479 } else { 480 at->at_probe = ATA_PROBE_GOOD; 481 if (atx == NULL) 482 ap->ap_probe = at->at_probe; 483 } 484 return (error); 485 } 486 487 /* 488 * DISK-specific probe after initial ident 489 */ 490 static int 491 ahci_cam_probe_disk(struct ahci_port *ap, struct ata_port *atx) 492 { 493 struct ata_port *at; 494 struct ata_xfer *xa; 495 496 at = atx ? atx : ap->ap_ata[0]; 497 498 /* 499 * Set dummy xfer mode 500 */ 501 ahci_set_xfer(ap, atx); 502 503 /* 504 * Enable write cache if supported 505 * 506 * NOTE: "WD My Book" external disk devices have a very poor 507 * daughter board between the the ESATA and the HD. Sending 508 * any ATA_C_SET_FEATURES commands will break the hardware port 509 * with a fatal protocol error. However, this device also 510 * indicates that WRITECACHE is already on and READAHEAD is 511 * not supported so we avoid the issue. 512 */ 513 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) && 514 (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE) == 0) { 515 xa = ahci_ata_get_xfer(ap, atx); 516 xa->complete = ahci_ata_dummy_done; 517 xa->fis->command = ATA_C_SET_FEATURES; 518 xa->fis->features = ATA_SF_WRITECACHE_EN; 519 /* xa->fis->features = ATA_SF_LOOKAHEAD_EN; */ 520 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 521 xa->fis->device = 0; 522 xa->flags = ATA_F_PIO | ATA_F_POLL; 523 xa->timeout = 1000; 524 xa->datalen = 0; 525 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE) 526 at->at_features |= ATA_PORT_F_WCACHE; 527 else 528 kprintf("%s: Unable to enable write-caching\n", 529 ATANAME(ap, atx)); 530 ahci_ata_put_xfer(xa); 531 } 532 533 /* 534 * Enable readahead if supported 535 */ 536 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) && 537 (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD) == 0) { 538 xa = ahci_ata_get_xfer(ap, atx); 539 xa->complete = ahci_ata_dummy_done; 540 xa->fis->command = ATA_C_SET_FEATURES; 541 xa->fis->features = ATA_SF_LOOKAHEAD_EN; 542 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 543 xa->fis->device = 0; 544 xa->flags = ATA_F_PIO | ATA_F_POLL; 545 xa->timeout = 1000; 546 xa->datalen = 0; 547 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE) 548 at->at_features |= ATA_PORT_F_RAHEAD; 549 else 550 kprintf("%s: Unable to enable read-ahead\n", 551 ATANAME(ap, atx)); 552 ahci_ata_put_xfer(xa); 553 } 554 555 /* 556 * FREEZE LOCK the device so malicious users can't lock it on us. 557 * As there is no harm in issuing this to devices that don't 558 * support the security feature set we just send it, and don't bother 559 * checking if the device sends a command abort to tell us it doesn't 560 * support it 561 */ 562 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) && 563 (at->at_identify.securestatus & ATA_SECURE_FROZEN) == 0 && 564 (AhciNoFeatures & (1 << ap->ap_num)) == 0) { 565 xa = ahci_ata_get_xfer(ap, atx); 566 xa->complete = ahci_ata_dummy_done; 567 xa->fis->command = ATA_C_SEC_FREEZE_LOCK; 568 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 569 xa->flags = ATA_F_PIO | ATA_F_POLL; 570 xa->timeout = 1000; 571 xa->datalen = 0; 572 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE) 573 at->at_features |= ATA_PORT_F_FRZLCK; 574 else 575 kprintf("%s: Unable to set security freeze\n", 576 ATANAME(ap, atx)); 577 ahci_ata_put_xfer(xa); 578 } 579 580 return (0); 581 } 582 583 /* 584 * ATAPI-specific probe after initial ident 585 */ 586 static int 587 ahci_cam_probe_atapi(struct ahci_port *ap, struct ata_port *atx) 588 { 589 ahci_set_xfer(ap, atx); 590 return(0); 591 } 592 593 /* 594 * Setting the transfer mode is irrelevant for the SATA transport 595 * but some (atapi) devices seem to need it anyway. In addition 596 * if we are running through a SATA->PATA converter for some reason 597 * beyond my comprehension we might have to set the mode. 598 * 599 * We only support DMA modes for SATA attached devices, so don't bother 600 * with legacy modes. 601 */ 602 static int 603 ahci_set_xfer(struct ahci_port *ap, struct ata_port *atx) 604 { 605 struct ata_port *at; 606 struct ata_xfer *xa; 607 u_int16_t mode; 608 u_int16_t mask; 609 610 at = atx ? atx : ap->ap_ata[0]; 611 612 /* 613 * Figure out the supported UDMA mode. Ignore other legacy modes. 614 */ 615 mask = le16toh(at->at_identify.ultradma); 616 if ((mask & 0xFF) == 0 || mask == 0xFFFF) 617 return(0); 618 mask &= 0xFF; 619 mode = 0x4F; 620 while ((mask & 0x8000) == 0) { 621 mask <<= 1; 622 --mode; 623 } 624 625 /* 626 * SATA atapi devices often still report a dma mode, even though 627 * it is irrelevant for SATA transport. It is also possible that 628 * we are running through a SATA->PATA converter and seeing the 629 * PATA dma mode. 630 * 631 * In this case the device may require a (dummy) SETXFER to be 632 * sent before it will work properly. 633 */ 634 xa = ahci_ata_get_xfer(ap, atx); 635 xa->complete = ahci_ata_dummy_done; 636 xa->fis->command = ATA_C_SET_FEATURES; 637 xa->fis->features = ATA_SF_SETXFER; 638 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 639 xa->fis->sector_count = mode; 640 xa->flags = ATA_F_PIO | ATA_F_POLL; 641 xa->timeout = 1000; 642 xa->datalen = 0; 643 if (ahci_ata_cmd(xa) != ATA_S_COMPLETE) { 644 kprintf("%s: Unable to set dummy xfer mode \n", 645 ATANAME(ap, atx)); 646 } else if (bootverbose) { 647 kprintf("%s: Set dummy xfer mode to %02x\n", 648 ATANAME(ap, atx), mode); 649 } 650 ahci_ata_put_xfer(xa); 651 return(0); 652 } 653 654 /* 655 * Fix byte ordering so buffers can be accessed as 656 * strings. 657 */ 658 static void 659 ata_fix_identify(struct ata_identify *id) 660 { 661 u_int16_t *swap; 662 int i; 663 664 swap = (u_int16_t *)id->serial; 665 for (i = 0; i < sizeof(id->serial) / sizeof(u_int16_t); i++) 666 swap[i] = bswap16(swap[i]); 667 668 swap = (u_int16_t *)id->firmware; 669 for (i = 0; i < sizeof(id->firmware) / sizeof(u_int16_t); i++) 670 swap[i] = bswap16(swap[i]); 671 672 swap = (u_int16_t *)id->model; 673 for (i = 0; i < sizeof(id->model) / sizeof(u_int16_t); i++) 674 swap[i] = bswap16(swap[i]); 675 } 676 677 /* 678 * Dummy done callback for xa. 679 */ 680 static void 681 ahci_ata_dummy_done(struct ata_xfer *xa) 682 { 683 } 684 685 /* 686 * Use an engineering request to initiate a target scan for devices 687 * behind a port multiplier. 688 * 689 * An asynchronous bus scan is used to avoid reentrancy issues. 690 */ 691 static void 692 ahci_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb) 693 { 694 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 695 696 if (ccb->ccb_h.func_code == XPT_SCAN_BUS) { 697 ap->ap_flags &= ~AP_F_SCAN_RUNNING; 698 if (ap->ap_flags & AP_F_SCAN_REQUESTED) { 699 ap->ap_flags &= ~AP_F_SCAN_REQUESTED; 700 ahci_cam_rescan(ap); 701 } 702 ap->ap_flags |= AP_F_SCAN_COMPLETED; 703 wakeup(&ap->ap_flags); 704 } 705 xpt_free_ccb(ccb); 706 } 707 708 static void 709 ahci_cam_rescan(struct ahci_port *ap) 710 { 711 struct cam_path *path; 712 union ccb *ccb; 713 int status; 714 int i; 715 716 if (ap->ap_flags & AP_F_SCAN_RUNNING) { 717 ap->ap_flags |= AP_F_SCAN_REQUESTED; 718 return; 719 } 720 ap->ap_flags |= AP_F_SCAN_RUNNING; 721 for (i = 0; i < AHCI_MAX_PMPORTS; ++i) { 722 ap->ap_ata[i]->at_features |= ATA_PORT_F_RESCAN; 723 } 724 725 status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim), 726 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); 727 if (status != CAM_REQ_CMP) 728 return; 729 730 ccb = xpt_alloc_ccb(); 731 xpt_setup_ccb(&ccb->ccb_h, path, 5); /* 5 = low priority */ 732 ccb->ccb_h.func_code = XPT_ENG_EXEC; 733 ccb->ccb_h.cbfcnp = ahci_cam_rescan_callback; 734 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 735 ccb->crcn.flags = CAM_FLAG_NONE; 736 xpt_action_async(ccb); 737 } 738 739 static void 740 ahci_xpt_rescan(struct ahci_port *ap) 741 { 742 struct cam_path *path; 743 union ccb *ccb; 744 int status; 745 746 status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim), 747 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); 748 if (status != CAM_REQ_CMP) 749 return; 750 751 ccb = xpt_alloc_ccb(); 752 xpt_setup_ccb(&ccb->ccb_h, path, 5); /* 5 = low priority */ 753 ccb->ccb_h.func_code = XPT_SCAN_BUS; 754 ccb->ccb_h.cbfcnp = ahci_cam_rescan_callback; 755 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 756 ccb->crcn.flags = CAM_FLAG_NONE; 757 xpt_action_async(ccb); 758 } 759 760 /* 761 * Action function - dispatch command 762 */ 763 static 764 void 765 ahci_xpt_action(struct cam_sim *sim, union ccb *ccb) 766 { 767 struct ahci_port *ap; 768 struct ata_port *at, *atx; 769 struct ccb_hdr *ccbh; 770 int unit; 771 772 /* XXX lock */ 773 ap = cam_sim_softc(sim); 774 atx = NULL; 775 KKASSERT(ap != NULL); 776 ccbh = &ccb->ccb_h; 777 unit = cam_sim_unit(sim); 778 779 /* 780 * Early failure checks. These checks do not apply to XPT_PATH_INQ, 781 * otherwise the bus rescan will not remove the dead devices when 782 * unplugging a PM. 783 * 784 * For non-wildcards we have one target (0) and one lun (0), 785 * unless we have a port multiplier. 786 * 787 * A wildcard target indicates only the general bus is being 788 * probed. 789 * 790 * Calculate at and atx. at is always non-NULL. atx is only 791 * non-NULL for direct-attached devices. It will be NULL for 792 * devices behind a port multiplier. 793 * 794 * XXX What do we do with a LUN wildcard? 795 */ 796 if (ccbh->target_id != CAM_TARGET_WILDCARD && 797 ccbh->func_code != XPT_PATH_INQ) { 798 if (ap->ap_type == ATA_PORT_T_NONE) { 799 ccbh->status = CAM_DEV_NOT_THERE; 800 xpt_done(ccb); 801 return; 802 } 803 if (ccbh->target_id < 0 || ccbh->target_id >= ap->ap_pmcount) { 804 ccbh->status = CAM_DEV_NOT_THERE; 805 xpt_done(ccb); 806 return; 807 } 808 at = ap->ap_ata[ccbh->target_id]; 809 if (ap->ap_type == ATA_PORT_T_PM) 810 atx = at; 811 812 if (ccbh->target_lun != CAM_LUN_WILDCARD && ccbh->target_lun) { 813 ccbh->status = CAM_DEV_NOT_THERE; 814 xpt_done(ccb); 815 return; 816 } 817 } else { 818 at = ap->ap_ata[0]; 819 } 820 821 /* 822 * Switch on the meta XPT command 823 */ 824 switch(ccbh->func_code) { 825 case XPT_ENG_EXEC: 826 /* 827 * This routine is called after a port multiplier has been 828 * probed. 829 */ 830 ccbh->status = CAM_REQ_CMP; 831 ahci_os_lock_port(ap); 832 ahci_port_state_machine(ap, 0); 833 ahci_os_unlock_port(ap); 834 xpt_done(ccb); 835 ahci_xpt_rescan(ap); 836 break; 837 case XPT_PATH_INQ: 838 /* 839 * This command always succeeds, otherwise the bus scan 840 * will not detach dead devices. 841 */ 842 ccb->cpi.version_num = 1; 843 ccb->cpi.hba_inquiry = 0; 844 ccb->cpi.target_sprt = 0; 845 ccb->cpi.hba_misc = PIM_SEQSCAN; 846 ccb->cpi.hba_eng_cnt = 0; 847 bzero(ccb->cpi.vuhba_flags, sizeof(ccb->cpi.vuhba_flags)); 848 ccb->cpi.max_target = AHCI_MAX_PMPORTS - 1; 849 ccb->cpi.max_lun = 0; 850 ccb->cpi.async_flags = 0; 851 ccb->cpi.hpath_id = 0; 852 ccb->cpi.initiator_id = AHCI_MAX_PMPORTS - 1; 853 ccb->cpi.unit_number = cam_sim_unit(sim); 854 ccb->cpi.bus_id = cam_sim_bus(sim); 855 ccb->cpi.base_transfer_speed = 150000; 856 ccb->cpi.transport = XPORT_SATA; 857 ccb->cpi.transport_version = 1; 858 ccb->cpi.protocol = PROTO_SCSI; 859 ccb->cpi.protocol_version = SCSI_REV_2; 860 861 ccbh->status = CAM_REQ_CMP; 862 if (ccbh->target_id == CAM_TARGET_WILDCARD) { 863 ahci_os_lock_port(ap); 864 ahci_port_state_machine(ap, 0); 865 ahci_os_unlock_port(ap); 866 } else { 867 switch(ahci_pread(ap, AHCI_PREG_SSTS) & 868 AHCI_PREG_SSTS_SPD) { 869 case AHCI_PREG_SSTS_SPD_GEN1: 870 ccb->cpi.base_transfer_speed = 150000; 871 break; 872 case AHCI_PREG_SSTS_SPD_GEN2: 873 ccb->cpi.base_transfer_speed = 300000; 874 break; 875 default: 876 /* unknown */ 877 ccb->cpi.base_transfer_speed = 1000; 878 break; 879 } 880 #if 0 881 if (ap->ap_type == ATA_PORT_T_NONE) 882 ccbh->status = CAM_DEV_NOT_THERE; 883 #endif 884 } 885 xpt_done(ccb); 886 break; 887 case XPT_RESET_DEV: 888 ahci_os_lock_port(ap); 889 if (ap->ap_type == ATA_PORT_T_NONE) { 890 ccbh->status = CAM_DEV_NOT_THERE; 891 } else { 892 ahci_port_reset(ap, atx, 0); 893 ccbh->status = CAM_REQ_CMP; 894 } 895 ahci_os_unlock_port(ap); 896 xpt_done(ccb); 897 break; 898 case XPT_RESET_BUS: 899 ahci_os_lock_port(ap); 900 ahci_port_reset(ap, NULL, 1); 901 ahci_os_unlock_port(ap); 902 ccbh->status = CAM_REQ_CMP; 903 xpt_done(ccb); 904 break; 905 case XPT_SET_TRAN_SETTINGS: 906 ccbh->status = CAM_FUNC_NOTAVAIL; 907 xpt_done(ccb); 908 break; 909 case XPT_GET_TRAN_SETTINGS: 910 ccb->cts.protocol = PROTO_SCSI; 911 ccb->cts.protocol_version = SCSI_REV_2; 912 ccb->cts.transport = XPORT_SATA; 913 ccb->cts.transport_version = XPORT_VERSION_UNSPECIFIED; 914 ccb->cts.proto_specific.valid = 0; 915 ccb->cts.xport_specific.valid = 0; 916 ccbh->status = CAM_REQ_CMP; 917 xpt_done(ccb); 918 break; 919 case XPT_CALC_GEOMETRY: 920 cam_calc_geometry(&ccb->ccg, 1); 921 xpt_done(ccb); 922 break; 923 case XPT_SCSI_IO: 924 /* 925 * Our parallel startup code might have only probed through 926 * to the IDENT, so do the last step if necessary. 927 */ 928 if (at->at_probe == ATA_PROBE_NEED_IDENT) 929 ahci_cam_probe(ap, atx); 930 if (at->at_probe != ATA_PROBE_GOOD) { 931 ccbh->status = CAM_DEV_NOT_THERE; 932 xpt_done(ccb); 933 break; 934 } 935 switch(at->at_type) { 936 case ATA_PORT_T_DISK: 937 ahci_xpt_scsi_disk_io(ap, atx, ccb); 938 break; 939 case ATA_PORT_T_ATAPI: 940 ahci_xpt_scsi_atapi_io(ap, atx, ccb); 941 break; 942 default: 943 ccbh->status = CAM_REQ_INVALID; 944 xpt_done(ccb); 945 break; 946 } 947 break; 948 default: 949 ccbh->status = CAM_REQ_INVALID; 950 xpt_done(ccb); 951 break; 952 } 953 } 954 955 /* 956 * Poll function. 957 * 958 * Generally this function gets called heavily when interrupts might be 959 * non-operational, during a halt/reboot or panic. 960 */ 961 static 962 void 963 ahci_xpt_poll(struct cam_sim *sim) 964 { 965 struct ahci_port *ap; 966 967 ap = cam_sim_softc(sim); 968 crit_enter(); 969 ahci_os_lock_port(ap); 970 ahci_port_intr(ap, 1); 971 ahci_os_unlock_port(ap); 972 crit_exit(); 973 } 974 975 /* 976 * Convert the SCSI command in ccb to an ata_xfer command in xa 977 * for ATA_PORT_T_DISK operations. Set the completion function 978 * to convert the response back, then dispatch to the OpenBSD AHCI 979 * layer. 980 * 981 * AHCI DISK commands only support a limited command set, and we 982 * fake additional commands to make it play nice with the CAM subsystem. 983 */ 984 static 985 void 986 ahci_xpt_scsi_disk_io(struct ahci_port *ap, struct ata_port *atx, 987 union ccb *ccb) 988 { 989 struct ccb_hdr *ccbh; 990 struct ccb_scsiio *csio; 991 struct ata_xfer *xa; 992 struct ata_port *at; 993 struct ata_fis_h2d *fis; 994 struct ata_pass_12 *atp12; 995 struct ata_pass_16 *atp16; 996 scsi_cdb_t cdb; 997 union scsi_data *rdata; 998 int rdata_len; 999 u_int64_t capacity; 1000 u_int64_t lba; 1001 u_int32_t count; 1002 1003 ccbh = &ccb->csio.ccb_h; 1004 csio = &ccb->csio; 1005 at = atx ? atx : ap->ap_ata[0]; 1006 1007 /* 1008 * XXX not passing NULL at for direct attach! 1009 */ 1010 xa = ahci_ata_get_xfer(ap, atx); 1011 rdata = (void *)csio->data_ptr; 1012 rdata_len = csio->dxfer_len; 1013 1014 /* 1015 * Build the FIS or process the csio to completion. 1016 */ 1017 cdb = (void *)((ccbh->flags & CAM_CDB_POINTER) ? 1018 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes); 1019 1020 switch(cdb->generic.opcode) { 1021 case REQUEST_SENSE: 1022 /* 1023 * Auto-sense everything, so explicit sense requests 1024 * return no-sense. 1025 */ 1026 ccbh->status = CAM_SCSI_STATUS_ERROR; 1027 break; 1028 case INQUIRY: 1029 /* 1030 * Inquiry supported features 1031 * 1032 * [opcode, byte2, page_code, length, control] 1033 */ 1034 if (cdb->inquiry.byte2 & SI_EVPD) { 1035 ahci_xpt_page_inquiry(ap, at, ccb); 1036 } else { 1037 bzero(rdata, rdata_len); 1038 if (rdata_len < SHORT_INQUIRY_LENGTH) { 1039 ccbh->status = CAM_CCB_LEN_ERR; 1040 break; 1041 } 1042 if (rdata_len > sizeof(rdata->inquiry_data)) 1043 rdata_len = sizeof(rdata->inquiry_data); 1044 rdata->inquiry_data.device = T_DIRECT; 1045 rdata->inquiry_data.version = SCSI_REV_SPC2; 1046 rdata->inquiry_data.response_format = 2; 1047 rdata->inquiry_data.additional_length = 32; 1048 bcopy("SATA ", rdata->inquiry_data.vendor, 8); 1049 bcopy(at->at_identify.model, 1050 rdata->inquiry_data.product, 1051 sizeof(rdata->inquiry_data.product)); 1052 bcopy(at->at_identify.firmware, 1053 rdata->inquiry_data.revision, 1054 sizeof(rdata->inquiry_data.revision)); 1055 ccbh->status = CAM_REQ_CMP; 1056 } 1057 break; 1058 case READ_CAPACITY_16: 1059 if (cdb->read_capacity_16.service_action != SRC16_SERVICE_ACTION) { 1060 ccbh->status = CAM_REQ_INVALID; 1061 break; 1062 } 1063 if (rdata_len < sizeof(rdata->read_capacity_data_16)) { 1064 ccbh->status = CAM_CCB_LEN_ERR; 1065 break; 1066 } 1067 /* fall through */ 1068 case READ_CAPACITY: 1069 if (rdata_len < sizeof(rdata->read_capacity_data)) { 1070 ccbh->status = CAM_CCB_LEN_ERR; 1071 break; 1072 } 1073 1074 capacity = at->at_capacity; 1075 1076 bzero(rdata, rdata_len); 1077 if (cdb->generic.opcode == READ_CAPACITY) { 1078 rdata_len = sizeof(rdata->read_capacity_data); 1079 if (capacity > 0xFFFFFFFFU) 1080 capacity = 0xFFFFFFFFU; 1081 bzero(&rdata->read_capacity_data, rdata_len); 1082 scsi_ulto4b((u_int32_t)capacity - 1, 1083 rdata->read_capacity_data.addr); 1084 scsi_ulto4b(512, rdata->read_capacity_data.length); 1085 } else { 1086 rdata_len = sizeof(rdata->read_capacity_data_16); 1087 bzero(&rdata->read_capacity_data_16, rdata_len); 1088 scsi_u64to8b(capacity - 1, 1089 rdata->read_capacity_data_16.addr); 1090 scsi_ulto4b(512, rdata->read_capacity_data_16.length); 1091 } 1092 ccbh->status = CAM_REQ_CMP; 1093 break; 1094 case SYNCHRONIZE_CACHE: 1095 /* 1096 * Synchronize cache. Specification says this can take 1097 * greater then 30 seconds so give it at least 45. 1098 */ 1099 fis = xa->fis; 1100 fis->flags = ATA_H2D_FLAGS_CMD; 1101 fis->command = ATA_C_FLUSH_CACHE; 1102 fis->device = 0; 1103 if (xa->timeout < 45000) 1104 xa->timeout = 45000; 1105 xa->datalen = 0; 1106 xa->flags = 0; 1107 xa->complete = ahci_ata_complete_disk_synchronize_cache; 1108 break; 1109 case TEST_UNIT_READY: 1110 case START_STOP_UNIT: 1111 case PREVENT_ALLOW: 1112 /* 1113 * Just silently return success 1114 */ 1115 ccbh->status = CAM_REQ_CMP; 1116 rdata_len = 0; 1117 break; 1118 case ATA_PASS_12: 1119 atp12 = &cdb->ata_pass_12; 1120 fis = xa->fis; 1121 /* 1122 * Figure out the flags to be used, depending on the direction of the 1123 * CAM request. 1124 */ 1125 switch (ccbh->flags & CAM_DIR_MASK) { 1126 case CAM_DIR_IN: 1127 xa->flags = ATA_F_READ; 1128 break; 1129 case CAM_DIR_OUT: 1130 xa->flags = ATA_F_WRITE; 1131 break; 1132 default: 1133 xa->flags = 0; 1134 } 1135 xa->flags |= ATA_F_POLL; 1136 xa->data = csio->data_ptr; 1137 xa->datalen = csio->dxfer_len; 1138 xa->complete = ahci_ata_complete_disk_rw; 1139 xa->timeout = ccbh->timeout; 1140 1141 /* 1142 * Populate the fis from the information we received through CAM 1143 * ATA passthrough. 1144 */ 1145 fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp12->flags ? */ 1146 fis->features = atp12->features; 1147 fis->sector_count = atp12->sector_count; 1148 fis->lba_low = atp12->lba_low; 1149 fis->lba_mid = atp12->lba_mid; 1150 fis->lba_high = atp12->lba_high; 1151 fis->device = atp12->device; /* maybe always 0? */ 1152 fis->command = atp12->command; 1153 fis->control = atp12->control; 1154 1155 /* 1156 * Mark as in progress so it is sent to the device. 1157 */ 1158 ccbh->status = CAM_REQ_INPROG; 1159 break; 1160 case ATA_PASS_16: 1161 atp16 = &cdb->ata_pass_16; 1162 fis = xa->fis; 1163 /* 1164 * Figure out the flags to be used, depending on the direction of the 1165 * CAM request. 1166 */ 1167 switch (ccbh->flags & CAM_DIR_MASK) { 1168 case CAM_DIR_IN: 1169 xa->flags = ATA_F_READ; 1170 break; 1171 case CAM_DIR_OUT: 1172 xa->flags = ATA_F_WRITE; 1173 break; 1174 default: 1175 xa->flags = 0; 1176 } 1177 xa->flags |= ATA_F_POLL; 1178 xa->data = csio->data_ptr; 1179 xa->datalen = csio->dxfer_len; 1180 xa->complete = ahci_ata_complete_disk_rw; 1181 xa->timeout = ccbh->timeout; 1182 1183 /* 1184 * Populate the fis from the information we received through CAM 1185 * ATA passthrough. 1186 */ 1187 fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp16->flags ? */ 1188 fis->features = atp16->features; 1189 fis->features_exp = atp16->features_ext; 1190 fis->sector_count = atp16->sector_count; 1191 fis->sector_count_exp = atp16->sector_count_ext; 1192 fis->lba_low = atp16->lba_low; 1193 fis->lba_low_exp = atp16->lba_low_ext; 1194 fis->lba_mid = atp16->lba_mid; 1195 fis->lba_mid_exp = atp16->lba_mid_ext; 1196 fis->lba_high = atp16->lba_high; 1197 fis->lba_mid_exp = atp16->lba_mid_ext; 1198 fis->device = atp16->device; /* maybe always 0? */ 1199 fis->command = atp16->command; 1200 1201 /* 1202 * Mark as in progress so it is sent to the device. 1203 */ 1204 ccbh->status = CAM_REQ_INPROG; 1205 break; 1206 default: 1207 switch(cdb->generic.opcode) { 1208 case READ_6: 1209 lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF; 1210 count = cdb->rw_6.length ? cdb->rw_6.length : 0x100; 1211 xa->flags = ATA_F_READ; 1212 break; 1213 case READ_10: 1214 lba = scsi_4btoul(cdb->rw_10.addr); 1215 count = scsi_2btoul(cdb->rw_10.length); 1216 xa->flags = ATA_F_READ; 1217 break; 1218 case READ_12: 1219 lba = scsi_4btoul(cdb->rw_12.addr); 1220 count = scsi_4btoul(cdb->rw_12.length); 1221 xa->flags = ATA_F_READ; 1222 break; 1223 case READ_16: 1224 lba = scsi_8btou64(cdb->rw_16.addr); 1225 count = scsi_4btoul(cdb->rw_16.length); 1226 xa->flags = ATA_F_READ; 1227 break; 1228 case WRITE_6: 1229 lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF; 1230 count = cdb->rw_6.length ? cdb->rw_6.length : 0x100; 1231 xa->flags = ATA_F_WRITE; 1232 break; 1233 case WRITE_10: 1234 lba = scsi_4btoul(cdb->rw_10.addr); 1235 count = scsi_2btoul(cdb->rw_10.length); 1236 xa->flags = ATA_F_WRITE; 1237 break; 1238 case WRITE_12: 1239 lba = scsi_4btoul(cdb->rw_12.addr); 1240 count = scsi_4btoul(cdb->rw_12.length); 1241 xa->flags = ATA_F_WRITE; 1242 break; 1243 case WRITE_16: 1244 lba = scsi_8btou64(cdb->rw_16.addr); 1245 count = scsi_4btoul(cdb->rw_16.length); 1246 xa->flags = ATA_F_WRITE; 1247 break; 1248 default: 1249 ccbh->status = CAM_REQ_INVALID; 1250 break; 1251 } 1252 if (ccbh->status != CAM_REQ_INPROG) 1253 break; 1254 1255 fis = xa->fis; 1256 fis->flags = ATA_H2D_FLAGS_CMD; 1257 fis->lba_low = (u_int8_t)lba; 1258 fis->lba_mid = (u_int8_t)(lba >> 8); 1259 fis->lba_high = (u_int8_t)(lba >> 16); 1260 fis->device = ATA_H2D_DEVICE_LBA; 1261 1262 /* 1263 * NCQ only for direct-attached disks, do not currently 1264 * try to use NCQ with port multipliers. 1265 */ 1266 if (at->at_ncqdepth > 1 && 1267 ap->ap_type == ATA_PORT_T_DISK && 1268 (ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) && 1269 (ccbh->flags & CAM_POLLED) == 0) { 1270 /* 1271 * Use NCQ - always uses 48 bit addressing 1272 */ 1273 xa->flags |= ATA_F_NCQ; 1274 fis->command = (xa->flags & ATA_F_WRITE) ? 1275 ATA_C_WRITE_FPDMA : ATA_C_READ_FPDMA; 1276 fis->lba_low_exp = (u_int8_t)(lba >> 24); 1277 fis->lba_mid_exp = (u_int8_t)(lba >> 32); 1278 fis->lba_high_exp = (u_int8_t)(lba >> 40); 1279 fis->sector_count = xa->tag << 3; 1280 fis->features = (u_int8_t)count; 1281 fis->features_exp = (u_int8_t)(count >> 8); 1282 } else if (count > 0x100 || lba > 0x0FFFFFFFU) { 1283 /* 1284 * Use LBA48 1285 */ 1286 fis->command = (xa->flags & ATA_F_WRITE) ? 1287 ATA_C_WRITEDMA_EXT : ATA_C_READDMA_EXT; 1288 fis->lba_low_exp = (u_int8_t)(lba >> 24); 1289 fis->lba_mid_exp = (u_int8_t)(lba >> 32); 1290 fis->lba_high_exp = (u_int8_t)(lba >> 40); 1291 fis->sector_count = (u_int8_t)count; 1292 fis->sector_count_exp = (u_int8_t)(count >> 8); 1293 } else { 1294 /* 1295 * Use LBA 1296 * 1297 * NOTE: 256 sectors is supported, stored as 0. 1298 */ 1299 fis->command = (xa->flags & ATA_F_WRITE) ? 1300 ATA_C_WRITEDMA : ATA_C_READDMA; 1301 fis->device |= (u_int8_t)(lba >> 24) & 0x0F; 1302 fis->sector_count = (u_int8_t)count; 1303 } 1304 1305 xa->data = csio->data_ptr; 1306 xa->datalen = csio->dxfer_len; 1307 xa->complete = ahci_ata_complete_disk_rw; 1308 xa->timeout = ccbh->timeout; /* milliseconds */ 1309 #if 0 1310 if (xa->timeout > 10000) /* XXX - debug */ 1311 xa->timeout = 10000; 1312 #endif 1313 if (ccbh->flags & CAM_POLLED) 1314 xa->flags |= ATA_F_POLL; 1315 break; 1316 } 1317 1318 /* 1319 * If the request is still in progress the xa and FIS have 1320 * been set up (except for the PM target), and must be dispatched. 1321 * Otherwise the request was completed. 1322 */ 1323 if (ccbh->status == CAM_REQ_INPROG) { 1324 KKASSERT(xa->complete != NULL); 1325 xa->atascsi_private = ccb; 1326 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 1327 ahci_os_lock_port(ap); 1328 xa->fis->flags |= at->at_target; 1329 ahci_ata_cmd(xa); 1330 ahci_os_unlock_port(ap); 1331 } else { 1332 ahci_ata_put_xfer(xa); 1333 xpt_done(ccb); 1334 } 1335 } 1336 1337 /* 1338 * Convert the SCSI command in ccb to an ata_xfer command in xa 1339 * for ATA_PORT_T_ATAPI operations. Set the completion function 1340 * to convert the response back, then dispatch to the OpenBSD AHCI 1341 * layer. 1342 */ 1343 static 1344 void 1345 ahci_xpt_scsi_atapi_io(struct ahci_port *ap, struct ata_port *atx, 1346 union ccb *ccb) 1347 { 1348 struct ccb_hdr *ccbh; 1349 struct ccb_scsiio *csio; 1350 struct ata_xfer *xa; 1351 struct ata_fis_h2d *fis; 1352 scsi_cdb_t cdbs; 1353 scsi_cdb_t cdbd; 1354 int flags; 1355 struct ata_port *at; 1356 1357 ccbh = &ccb->csio.ccb_h; 1358 csio = &ccb->csio; 1359 at = atx ? atx : ap->ap_ata[0]; 1360 1361 switch (ccbh->flags & CAM_DIR_MASK) { 1362 case CAM_DIR_IN: 1363 flags = ATA_F_PACKET | ATA_F_READ; 1364 break; 1365 case CAM_DIR_OUT: 1366 flags = ATA_F_PACKET | ATA_F_WRITE; 1367 break; 1368 case CAM_DIR_NONE: 1369 flags = ATA_F_PACKET; 1370 break; 1371 default: 1372 ccbh->status = CAM_REQ_INVALID; 1373 xpt_done(ccb); 1374 return; 1375 /* NOT REACHED */ 1376 } 1377 1378 /* 1379 * Special handling to get the rfis back into host memory while 1380 * still allowing the chip to run commands in parallel to 1381 * ATAPI devices behind a PM. 1382 */ 1383 flags |= ATA_F_AUTOSENSE; 1384 1385 /* 1386 * The command has to fit in the packet command buffer. 1387 */ 1388 if (csio->cdb_len < 6 || csio->cdb_len > 16) { 1389 ccbh->status = CAM_CCB_LEN_ERR; 1390 xpt_done(ccb); 1391 return; 1392 } 1393 1394 /* 1395 * Initialize the XA and FIS. It is unclear how much of 1396 * this has to mimic the equivalent ATA command. 1397 * 1398 * XXX not passing NULL at for direct attach! 1399 */ 1400 xa = ahci_ata_get_xfer(ap, atx); 1401 fis = xa->fis; 1402 1403 fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 1404 fis->command = ATA_C_PACKET; 1405 fis->device = ATA_H2D_DEVICE_LBA; 1406 fis->sector_count = xa->tag << 3; 1407 if (flags & (ATA_F_READ | ATA_F_WRITE)) { 1408 if (flags & ATA_F_WRITE) { 1409 fis->features = ATA_H2D_FEATURES_DMA | 1410 ATA_H2D_FEATURES_DIR_WRITE; 1411 } else { 1412 fis->features = ATA_H2D_FEATURES_DMA | 1413 ATA_H2D_FEATURES_DIR_READ; 1414 } 1415 } else { 1416 fis->lba_mid = 0; 1417 fis->lba_high = 0; 1418 } 1419 fis->control = ATA_FIS_CONTROL_4BIT; 1420 1421 xa->flags = flags; 1422 xa->data = csio->data_ptr; 1423 xa->datalen = csio->dxfer_len; 1424 xa->timeout = ccbh->timeout; /* milliseconds */ 1425 1426 if (ccbh->flags & CAM_POLLED) 1427 xa->flags |= ATA_F_POLL; 1428 1429 /* 1430 * Copy the cdb to the packetcmd buffer in the FIS using a 1431 * convenient pointer in the xa. 1432 * 1433 * Zero-out any trailing bytes in case the ATAPI device cares. 1434 */ 1435 cdbs = (void *)((ccbh->flags & CAM_CDB_POINTER) ? 1436 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes); 1437 bcopy(cdbs, xa->packetcmd, csio->cdb_len); 1438 if (csio->cdb_len < 16) 1439 bzero(xa->packetcmd + csio->cdb_len, 16 - csio->cdb_len); 1440 1441 #if 0 1442 kprintf("opcode %d cdb_len %d dxfer_len %d\n", 1443 cdbs->generic.opcode, 1444 csio->cdb_len, csio->dxfer_len); 1445 #endif 1446 1447 /* 1448 * Some ATAPI commands do not actually follow the SCSI standard. 1449 */ 1450 cdbd = (void *)xa->packetcmd; 1451 1452 switch(cdbd->generic.opcode) { 1453 case REQUEST_SENSE: 1454 /* 1455 * Force SENSE requests to the ATAPI sense length. 1456 * 1457 * It is unclear if this is needed or not. 1458 */ 1459 if (cdbd->sense.length == SSD_FULL_SIZE) { 1460 if (bootverbose) { 1461 kprintf("%s: Shortening sense request\n", 1462 PORTNAME(ap)); 1463 } 1464 cdbd->sense.length = offsetof(struct scsi_sense_data, 1465 extra_bytes[0]); 1466 } 1467 break; 1468 case INQUIRY: 1469 /* 1470 * Some ATAPI devices can't handle long inquiry lengths, 1471 * don't ask me why. Truncate the inquiry length. 1472 */ 1473 if (cdbd->inquiry.page_code == 0 && 1474 cdbd->inquiry.length > SHORT_INQUIRY_LENGTH) { 1475 cdbd->inquiry.length = SHORT_INQUIRY_LENGTH; 1476 } 1477 break; 1478 case READ_6: 1479 case WRITE_6: 1480 /* 1481 * Convert *_6 to *_10 commands. Most ATAPI devices 1482 * cannot handle the SCSI READ_6 and WRITE_6 commands. 1483 */ 1484 cdbd->rw_10.opcode |= 0x20; 1485 cdbd->rw_10.byte2 = 0; 1486 cdbd->rw_10.addr[0] = cdbs->rw_6.addr[0] & 0x1F; 1487 cdbd->rw_10.addr[1] = cdbs->rw_6.addr[1]; 1488 cdbd->rw_10.addr[2] = cdbs->rw_6.addr[2]; 1489 cdbd->rw_10.addr[3] = 0; 1490 cdbd->rw_10.reserved = 0; 1491 cdbd->rw_10.length[0] = 0; 1492 cdbd->rw_10.length[1] = cdbs->rw_6.length; 1493 cdbd->rw_10.control = cdbs->rw_6.control; 1494 break; 1495 default: 1496 break; 1497 } 1498 1499 /* 1500 * And dispatch 1501 */ 1502 xa->complete = ahci_atapi_complete_cmd; 1503 xa->atascsi_private = ccb; 1504 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 1505 ahci_os_lock_port(ap); 1506 ahci_ata_cmd(xa); 1507 ahci_os_unlock_port(ap); 1508 } 1509 1510 /* 1511 * Simulate page inquiries for disk attachments. 1512 */ 1513 static 1514 void 1515 ahci_xpt_page_inquiry(struct ahci_port *ap, struct ata_port *at, union ccb *ccb) 1516 { 1517 union { 1518 struct scsi_vpd_supported_page_list list; 1519 struct scsi_vpd_unit_serial_number serno; 1520 struct scsi_vpd_unit_devid devid; 1521 char buf[256]; 1522 } *page; 1523 scsi_cdb_t cdb; 1524 int i; 1525 int j; 1526 int len; 1527 1528 page = kmalloc(sizeof(*page), M_DEVBUF, M_WAITOK | M_ZERO); 1529 1530 cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1531 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes); 1532 1533 switch(cdb->inquiry.page_code) { 1534 case SVPD_SUPPORTED_PAGE_LIST: 1535 i = 0; 1536 page->list.device = T_DIRECT; 1537 page->list.page_code = SVPD_SUPPORTED_PAGE_LIST; 1538 page->list.list[i++] = SVPD_SUPPORTED_PAGE_LIST; 1539 page->list.list[i++] = SVPD_UNIT_SERIAL_NUMBER; 1540 page->list.list[i++] = SVPD_UNIT_DEVID; 1541 page->list.length = i; 1542 len = offsetof(struct scsi_vpd_supported_page_list, list[3]); 1543 break; 1544 case SVPD_UNIT_SERIAL_NUMBER: 1545 i = 0; 1546 j = sizeof(at->at_identify.serial); 1547 for (i = 0; i < j && at->at_identify.serial[i] == ' '; ++i) 1548 ; 1549 while (j > i && at->at_identify.serial[j-1] == ' ') 1550 --j; 1551 page->serno.device = T_DIRECT; 1552 page->serno.page_code = SVPD_UNIT_SERIAL_NUMBER; 1553 page->serno.length = j - i; 1554 bcopy(at->at_identify.serial + i, 1555 page->serno.serial_num, j - i); 1556 len = offsetof(struct scsi_vpd_unit_serial_number, 1557 serial_num[j-i]); 1558 break; 1559 case SVPD_UNIT_DEVID: 1560 /* fall through for now */ 1561 default: 1562 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 1563 len = 0; 1564 break; 1565 } 1566 if (ccb->ccb_h.status == CAM_REQ_INPROG) { 1567 if (len <= ccb->csio.dxfer_len) { 1568 ccb->ccb_h.status = CAM_REQ_CMP; 1569 bzero(ccb->csio.data_ptr, ccb->csio.dxfer_len); 1570 bcopy(page, ccb->csio.data_ptr, len); 1571 ccb->csio.resid = ccb->csio.dxfer_len - len; 1572 } else { 1573 ccb->ccb_h.status = CAM_CCB_LEN_ERR; 1574 } 1575 } 1576 kfree(page, M_DEVBUF); 1577 } 1578 1579 /* 1580 * Completion function for ATA_PORT_T_DISK cache synchronization. 1581 */ 1582 static 1583 void 1584 ahci_ata_complete_disk_synchronize_cache(struct ata_xfer *xa) 1585 { 1586 union ccb *ccb = xa->atascsi_private; 1587 struct ccb_hdr *ccbh = &ccb->ccb_h; 1588 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 1589 1590 switch(xa->state) { 1591 case ATA_S_COMPLETE: 1592 ccbh->status = CAM_REQ_CMP; 1593 ccb->csio.scsi_status = SCSI_STATUS_OK; 1594 break; 1595 case ATA_S_ERROR: 1596 kprintf("%s: synchronize_cache: error\n", 1597 ATANAME(ap, xa->at)); 1598 ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID; 1599 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1600 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1601 break; 1602 case ATA_S_TIMEOUT: 1603 kprintf("%s: synchronize_cache: timeout\n", 1604 ATANAME(ap, xa->at)); 1605 ccbh->status = CAM_CMD_TIMEOUT; 1606 break; 1607 default: 1608 kprintf("%s: synchronize_cache: unknown state %d\n", 1609 ATANAME(ap, xa->at), xa->state); 1610 ccbh->status = CAM_REQ_CMP_ERR; 1611 break; 1612 } 1613 ahci_ata_put_xfer(xa); 1614 ahci_os_unlock_port(ap); 1615 xpt_done(ccb); 1616 ahci_os_lock_port(ap); 1617 } 1618 1619 /* 1620 * Completion function for ATA_PORT_T_DISK I/O 1621 */ 1622 static 1623 void 1624 ahci_ata_complete_disk_rw(struct ata_xfer *xa) 1625 { 1626 union ccb *ccb = xa->atascsi_private; 1627 struct ccb_hdr *ccbh = &ccb->ccb_h; 1628 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 1629 1630 switch(xa->state) { 1631 case ATA_S_COMPLETE: 1632 ccbh->status = CAM_REQ_CMP; 1633 ccb->csio.scsi_status = SCSI_STATUS_OK; 1634 break; 1635 case ATA_S_ERROR: 1636 kprintf("%s: disk_rw: error\n", ATANAME(ap, xa->at)); 1637 ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID; 1638 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1639 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1640 break; 1641 case ATA_S_TIMEOUT: 1642 kprintf("%s: disk_rw: timeout\n", ATANAME(ap, xa->at)); 1643 ccbh->status = CAM_CMD_TIMEOUT; 1644 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1645 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1646 break; 1647 default: 1648 kprintf("%s: disk_rw: unknown state %d\n", 1649 ATANAME(ap, xa->at), xa->state); 1650 ccbh->status = CAM_REQ_CMP_ERR; 1651 break; 1652 } 1653 ccb->csio.resid = xa->resid; 1654 ahci_ata_put_xfer(xa); 1655 ahci_os_unlock_port(ap); 1656 xpt_done(ccb); 1657 ahci_os_lock_port(ap); 1658 } 1659 1660 /* 1661 * Completion function for ATA_PORT_T_ATAPI I/O 1662 * 1663 * Sense data is returned in the rfis. 1664 */ 1665 static 1666 void 1667 ahci_atapi_complete_cmd(struct ata_xfer *xa) 1668 { 1669 union ccb *ccb = xa->atascsi_private; 1670 struct ccb_hdr *ccbh = &ccb->ccb_h; 1671 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 1672 scsi_cdb_t cdb; 1673 1674 cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1675 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes); 1676 1677 switch(xa->state) { 1678 case ATA_S_COMPLETE: 1679 ccbh->status = CAM_REQ_CMP; 1680 ccb->csio.scsi_status = SCSI_STATUS_OK; 1681 break; 1682 case ATA_S_ERROR: 1683 ccbh->status = CAM_SCSI_STATUS_ERROR; 1684 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1685 ahci_ata_atapi_sense(&xa->rfis, &ccb->csio.sense_data); 1686 break; 1687 case ATA_S_TIMEOUT: 1688 kprintf("%s: cmd %d: timeout\n", 1689 PORTNAME(ap), cdb->generic.opcode); 1690 ccbh->status = CAM_CMD_TIMEOUT; 1691 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1692 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1693 break; 1694 default: 1695 kprintf("%s: cmd %d: unknown state %d\n", 1696 PORTNAME(ap), cdb->generic.opcode, xa->state); 1697 ccbh->status = CAM_REQ_CMP_ERR; 1698 break; 1699 } 1700 ccb->csio.resid = xa->resid; 1701 ahci_ata_put_xfer(xa); 1702 ahci_os_unlock_port(ap); 1703 xpt_done(ccb); 1704 ahci_os_lock_port(ap); 1705 } 1706 1707 /* 1708 * Construct dummy sense data for errors on DISKs 1709 */ 1710 static 1711 void 1712 ahci_ata_dummy_sense(struct scsi_sense_data *sense_data) 1713 { 1714 sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR; 1715 sense_data->segment = 0; 1716 sense_data->flags = SSD_KEY_MEDIUM_ERROR; 1717 sense_data->info[0] = 0; 1718 sense_data->info[1] = 0; 1719 sense_data->info[2] = 0; 1720 sense_data->info[3] = 0; 1721 sense_data->extra_len = 0; 1722 } 1723 1724 /* 1725 * Construct atapi sense data for errors on ATAPI 1726 * 1727 * The ATAPI sense data is stored in the passed rfis and must be converted 1728 * to SCSI sense data. 1729 */ 1730 static 1731 void 1732 ahci_ata_atapi_sense(struct ata_fis_d2h *rfis, 1733 struct scsi_sense_data *sense_data) 1734 { 1735 sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR; 1736 sense_data->segment = 0; 1737 sense_data->flags = (rfis->error & 0xF0) >> 4; 1738 if (rfis->error & 0x04) 1739 sense_data->flags |= SSD_KEY_ILLEGAL_REQUEST; 1740 if (rfis->error & 0x02) 1741 sense_data->flags |= SSD_EOM; 1742 if (rfis->error & 0x01) 1743 sense_data->flags |= SSD_ILI; 1744 sense_data->info[0] = 0; 1745 sense_data->info[1] = 0; 1746 sense_data->info[2] = 0; 1747 sense_data->info[3] = 0; 1748 sense_data->extra_len = 0; 1749 } 1750 1751 static 1752 void 1753 ahci_strip_string(const char **basep, int *lenp) 1754 { 1755 const char *base = *basep; 1756 int len = *lenp; 1757 1758 while (len && (*base == 0 || *base == ' ')) { 1759 --len; 1760 ++base; 1761 } 1762 while (len && (base[len-1] == 0 || base[len-1] == ' ')) 1763 --len; 1764 *basep = base; 1765 *lenp = len; 1766 } 1767