1 /* 2 * (MPSAFE) 3 * 4 * Copyright (c) 2009 The DragonFly Project. All rights reserved. 5 * 6 * This code is derived from software contributed to The DragonFly Project 7 * by Matthew Dillon <dillon@backplane.com> 8 * 9 * Redistribution and use in source and binary forms, with or without 10 * modification, are permitted provided that the following conditions 11 * are met: 12 * 13 * 1. Redistributions of source code must retain the above copyright 14 * notice, this list of conditions and the following disclaimer. 15 * 2. Redistributions in binary form must reproduce the above copyright 16 * notice, this list of conditions and the following disclaimer in 17 * the documentation and/or other materials provided with the 18 * distribution. 19 * 3. Neither the name of The DragonFly Project nor the names of its 20 * contributors may be used to endorse or promote products derived 21 * from this software without specific, prior written permission. 22 * 23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS 24 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT 25 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS 26 * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 27 * COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, 28 * INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING, 29 * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; 30 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED 31 * AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, 32 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 33 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 34 * SUCH DAMAGE. 35 * 36 * 37 * Copyright (c) 2007 David Gwynne <dlg@openbsd.org> 38 * 39 * Permission to use, copy, modify, and distribute this software for any 40 * purpose with or without fee is hereby granted, provided that the above 41 * copyright notice and this permission notice appear in all copies. 42 * 43 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES 44 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF 45 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR 46 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES 47 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN 48 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF 49 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. 50 * 51 * $OpenBSD: atascsi.c,v 1.64 2009/02/16 21:19:06 miod Exp $ 52 * $DragonFly$ 53 */ 54 /* 55 * Implement each SATA port as its own SCSI bus on CAM. This way we can 56 * implement future port multiplier features as individual devices on the 57 * bus. 58 * 59 * Much of the cdb<->xa conversion code was taken from OpenBSD, the rest 60 * was written natively for DragonFly. 61 */ 62 63 #include "ahci.h" 64 65 static void ahci_xpt_action(struct cam_sim *sim, union ccb *ccb); 66 static void ahci_xpt_poll(struct cam_sim *sim); 67 static void ahci_xpt_scsi_disk_io(struct ahci_port *ap, 68 struct ata_port *at, union ccb *ccb); 69 static void ahci_xpt_scsi_atapi_io(struct ahci_port *ap, 70 struct ata_port *at, union ccb *ccb); 71 static void ahci_xpt_page_inquiry(struct ahci_port *ap, 72 struct ata_port *at, union ccb *ccb); 73 74 static void ahci_ata_complete_disk_rw(struct ata_xfer *xa); 75 static void ahci_ata_complete_disk_synchronize_cache(struct ata_xfer *xa); 76 static void ahci_atapi_complete_cmd(struct ata_xfer *xa); 77 static void ahci_ata_dummy_sense(struct scsi_sense_data *sense_data); 78 static void ahci_ata_atapi_sense(struct ata_fis_d2h *rfis, 79 struct scsi_sense_data *sense_data); 80 81 static int ahci_cam_probe_disk(struct ahci_port *ap, struct ata_port *at); 82 static int ahci_cam_probe_atapi(struct ahci_port *ap, struct ata_port *at); 83 static int ahci_set_xfer(struct ahci_port *ap, struct ata_port *atx); 84 static void ahci_ata_dummy_done(struct ata_xfer *xa); 85 static void ata_fix_identify(struct ata_identify *id); 86 static void ahci_cam_rescan(struct ahci_port *ap); 87 static void ahci_strip_string(const char **basep, int *lenp); 88 89 int 90 ahci_cam_attach(struct ahci_port *ap) 91 { 92 struct cam_devq *devq; 93 struct cam_sim *sim; 94 int error; 95 int unit; 96 97 /* 98 * We want at least one ccb to be available for error processing 99 * so don't let CAM use more then ncmds - 1. 100 */ 101 unit = device_get_unit(ap->ap_sc->sc_dev); 102 if (ap->ap_sc->sc_ncmds > 1) 103 devq = cam_simq_alloc(ap->ap_sc->sc_ncmds - 1); 104 else 105 devq = cam_simq_alloc(ap->ap_sc->sc_ncmds); 106 if (devq == NULL) { 107 return (ENOMEM); 108 } 109 sim = cam_sim_alloc(ahci_xpt_action, ahci_xpt_poll, "ahci", 110 (void *)ap, unit, &ap->ap_sim_lock, 1, 1, devq); 111 cam_simq_release(devq); 112 if (sim == NULL) { 113 return (ENOMEM); 114 } 115 ap->ap_sim = sim; 116 ahci_os_unlock_port(ap); 117 lockmgr(&ap->ap_sim_lock, LK_EXCLUSIVE); 118 error = xpt_bus_register(ap->ap_sim, ap->ap_num); 119 lockmgr(&ap->ap_sim_lock, LK_RELEASE); 120 ahci_os_lock_port(ap); 121 if (error != CAM_SUCCESS) { 122 ahci_cam_detach(ap); 123 return (EINVAL); 124 } 125 ap->ap_flags |= AP_F_BUS_REGISTERED; 126 127 if (ap->ap_probe == ATA_PROBE_NEED_IDENT) 128 error = ahci_cam_probe(ap, NULL); 129 else 130 error = 0; 131 if (error) { 132 ahci_cam_detach(ap); 133 return (EIO); 134 } 135 ap->ap_flags |= AP_F_CAM_ATTACHED; 136 137 return(0); 138 } 139 140 /* 141 * The state of the port has changed. 142 * 143 * If at is NULL the physical port has changed state. 144 * If at is non-NULL a particular target behind a PM has changed state. 145 * 146 * If found is -1 the target state must be queued to a non-interrupt context. 147 * (only works with at == NULL). 148 * 149 * If found is 0 the target was removed. 150 * If found is 1 the target was inserted. 151 */ 152 void 153 ahci_cam_changed(struct ahci_port *ap, struct ata_port *atx, int found) 154 { 155 struct cam_path *tmppath; 156 int status; 157 int target; 158 159 target = atx ? atx->at_target : CAM_TARGET_WILDCARD; 160 161 if (ap->ap_sim == NULL) 162 return; 163 if (found == CAM_TARGET_WILDCARD) { 164 status = xpt_create_path(&tmppath, NULL, 165 cam_sim_path(ap->ap_sim), 166 target, CAM_LUN_WILDCARD); 167 if (status != CAM_REQ_CMP) 168 return; 169 ahci_cam_rescan(ap); 170 } else { 171 status = xpt_create_path(&tmppath, NULL, 172 cam_sim_path(ap->ap_sim), 173 target, 174 CAM_LUN_WILDCARD); 175 if (status != CAM_REQ_CMP) 176 return; 177 #if 0 178 /* 179 * This confuses CAM 180 */ 181 if (found) 182 xpt_async(AC_FOUND_DEVICE, tmppath, NULL); 183 else 184 xpt_async(AC_LOST_DEVICE, tmppath, NULL); 185 #endif 186 } 187 xpt_free_path(tmppath); 188 } 189 190 void 191 ahci_cam_detach(struct ahci_port *ap) 192 { 193 int error; 194 195 if ((ap->ap_flags & AP_F_CAM_ATTACHED) == 0) 196 return; 197 lockmgr(&ap->ap_sim_lock, LK_EXCLUSIVE); 198 if (ap->ap_sim) { 199 xpt_freeze_simq(ap->ap_sim, 1); 200 } 201 if (ap->ap_flags & AP_F_BUS_REGISTERED) { 202 error = xpt_bus_deregister(cam_sim_path(ap->ap_sim)); 203 KKASSERT(error == CAM_REQ_CMP); 204 ap->ap_flags &= ~AP_F_BUS_REGISTERED; 205 } 206 if (ap->ap_sim) { 207 cam_sim_free(ap->ap_sim); 208 ap->ap_sim = NULL; 209 } 210 lockmgr(&ap->ap_sim_lock, LK_RELEASE); 211 ap->ap_flags &= ~AP_F_CAM_ATTACHED; 212 } 213 214 /* 215 * Once the AHCI port has been attached we need to probe for a device or 216 * devices on the port and setup various options. 217 * 218 * If at is NULL we are probing the direct-attached device on the port, 219 * which may or may not be a port multiplier. 220 */ 221 int 222 ahci_cam_probe(struct ahci_port *ap, struct ata_port *atx) 223 { 224 struct ata_port *at; 225 struct ata_xfer *xa; 226 u_int64_t capacity; 227 u_int64_t capacity_bytes; 228 int model_len; 229 int firmware_len; 230 int serial_len; 231 int error; 232 int devncqdepth; 233 int i; 234 const char *model_id; 235 const char *firmware_id; 236 const char *serial_id; 237 const char *wcstr; 238 const char *rastr; 239 const char *scstr; 240 const char *type; 241 242 error = EIO; 243 244 /* 245 * Delayed CAM attachment for initial probe, sim may be NULL 246 */ 247 if (ap->ap_sim == NULL) 248 return(0); 249 250 /* 251 * A NULL atx indicates a probe of the directly connected device. 252 * A non-NULL atx indicates a device connected via a port multiplier. 253 * We need to preserve atx for calls to ahci_ata_get_xfer(). 254 * 255 * at is always non-NULL. For directly connected devices we supply 256 * an (at) pointing to target 0. 257 */ 258 if (atx == NULL) { 259 at = ap->ap_ata[0]; /* direct attached - device 0 */ 260 if (ap->ap_type == ATA_PORT_T_PM) { 261 kprintf("%s: Found Port Multiplier\n", 262 ATANAME(ap, atx)); 263 return (0); 264 } 265 at->at_type = ap->ap_type; 266 } else { 267 at = atx; 268 if (atx->at_type == ATA_PORT_T_PM) { 269 kprintf("%s: Bogus device, reducing port count to %d\n", 270 ATANAME(ap, atx), atx->at_target); 271 if (ap->ap_pmcount > atx->at_target) 272 ap->ap_pmcount = atx->at_target; 273 goto err; 274 } 275 } 276 if (ap->ap_type == ATA_PORT_T_NONE) 277 goto err; 278 if (at->at_type == ATA_PORT_T_NONE) 279 goto err; 280 281 /* 282 * Issue identify, saving the result 283 */ 284 xa = ahci_ata_get_xfer(ap, atx); 285 xa->complete = ahci_ata_dummy_done; 286 xa->data = &at->at_identify; 287 xa->datalen = sizeof(at->at_identify); 288 xa->flags = ATA_F_READ | ATA_F_PIO | ATA_F_POLL; 289 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 290 291 switch(at->at_type) { 292 case ATA_PORT_T_DISK: 293 xa->fis->command = ATA_C_IDENTIFY; 294 type = "DISK"; 295 break; 296 case ATA_PORT_T_ATAPI: 297 xa->fis->command = ATA_C_ATAPI_IDENTIFY; 298 xa->flags |= ATA_F_AUTOSENSE; 299 type = "ATAPI"; 300 break; 301 default: 302 xa->fis->command = ATA_C_ATAPI_IDENTIFY; 303 type = "UNKNOWN(ATAPI?)"; 304 break; 305 } 306 xa->fis->features = 0; 307 xa->fis->device = 0; 308 xa->timeout = 1000; 309 310 if (ahci_ata_cmd(xa) != ATA_S_COMPLETE) { 311 kprintf("%s: Detected %s device but unable to IDENTIFY\n", 312 ATANAME(ap, atx), type); 313 ahci_ata_put_xfer(xa); 314 goto err; 315 } 316 ahci_ata_put_xfer(xa); 317 318 ata_fix_identify(&at->at_identify); 319 320 /* 321 * Read capacity using SATA probe info. 322 */ 323 if (le16toh(at->at_identify.cmdset83) & 0x0400) { 324 /* LBA48 feature set supported */ 325 capacity = 0; 326 for (i = 3; i >= 0; --i) { 327 capacity <<= 16; 328 capacity += 329 le16toh(at->at_identify.addrsecxt[i]); 330 } 331 } else { 332 capacity = le16toh(at->at_identify.addrsec[1]); 333 capacity <<= 16; 334 capacity += le16toh(at->at_identify.addrsec[0]); 335 } 336 if (capacity == 0) 337 capacity = 1024 * 1024 / 512; 338 at->at_capacity = capacity; 339 if (atx == NULL) 340 ap->ap_probe = ATA_PROBE_GOOD; 341 342 capacity_bytes = capacity * 512; 343 344 /* 345 * Negotiate NCQ, throw away any ata_xfer's beyond the negotiated 346 * number of slots and limit the number of CAM ccb's to one less 347 * so we always have a slot available for recovery. 348 * 349 * NCQ is not used if ap_ncqdepth is 1 or the host controller does 350 * not support it, and in that case the driver can handle extra 351 * ccb's. 352 * 353 * NCQ is currently used only with direct-attached disks. It is 354 * not used with port multipliers or direct-attached ATAPI devices. 355 * 356 * Remember at least one extra CCB needs to be reserved for the 357 * error ccb. 358 */ 359 if ((ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) && 360 ap->ap_type == ATA_PORT_T_DISK && 361 (le16toh(at->at_identify.satacap) & (1 << 8))) { 362 at->at_ncqdepth = (le16toh(at->at_identify.qdepth) & 0x1F) + 1; 363 devncqdepth = at->at_ncqdepth; 364 if (at->at_ncqdepth > ap->ap_sc->sc_ncmds) 365 at->at_ncqdepth = ap->ap_sc->sc_ncmds; 366 if (at->at_ncqdepth > 1) { 367 for (i = 0; i < ap->ap_sc->sc_ncmds; ++i) { 368 xa = ahci_ata_get_xfer(ap, atx); 369 if (xa->tag < at->at_ncqdepth) { 370 xa->state = ATA_S_COMPLETE; 371 ahci_ata_put_xfer(xa); 372 } 373 } 374 if (at->at_ncqdepth >= ap->ap_sc->sc_ncmds) { 375 cam_devq_resize(ap->ap_sim->devq, 376 at->at_ncqdepth - 1); 377 } 378 } 379 } else { 380 devncqdepth = 0; 381 } 382 383 model_len = sizeof(at->at_identify.model); 384 model_id = at->at_identify.model; 385 ahci_strip_string(&model_id, &model_len); 386 387 firmware_len = sizeof(at->at_identify.firmware); 388 firmware_id = at->at_identify.firmware; 389 ahci_strip_string(&firmware_id, &firmware_len); 390 391 serial_len = sizeof(at->at_identify.serial); 392 serial_id = at->at_identify.serial; 393 ahci_strip_string(&serial_id, &serial_len); 394 395 /* 396 * Generate informatiive strings. 397 * 398 * NOTE: We do not automatically set write caching, lookahead, 399 * or the security state for ATAPI devices. 400 */ 401 if (at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) { 402 if (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE) 403 wcstr = "enabled"; 404 else if (at->at_type == ATA_PORT_T_ATAPI) 405 wcstr = "disabled"; 406 else 407 wcstr = "enabling"; 408 } else { 409 wcstr = "notsupp"; 410 } 411 412 if (at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) { 413 if (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD) 414 rastr = "enabled"; 415 else if (at->at_type == ATA_PORT_T_ATAPI) 416 rastr = "disabled"; 417 else 418 rastr = "enabling"; 419 } else { 420 rastr = "notsupp"; 421 } 422 423 if (at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) { 424 if (at->at_identify.securestatus & ATA_SECURE_FROZEN) 425 scstr = "frozen"; 426 else if (at->at_type == ATA_PORT_T_ATAPI) 427 scstr = "unfrozen"; 428 else if (AhciNoFeatures & (1 << ap->ap_num)) 429 scstr = "<disabled>"; 430 else 431 scstr = "freezing"; 432 } else { 433 scstr = "notsupp"; 434 } 435 436 kprintf("%s: Found %s \"%*.*s %*.*s\" serial=\"%*.*s\"\n" 437 "%s: tags=%d/%d satacap=%04x satafea=%04x NCQ=%s " 438 "capacity=%lld.%02dMB\n", 439 440 ATANAME(ap, atx), 441 type, 442 model_len, model_len, model_id, 443 firmware_len, firmware_len, firmware_id, 444 serial_len, serial_len, serial_id, 445 446 ATANAME(ap, atx), 447 devncqdepth, ap->ap_sc->sc_ncmds, 448 at->at_identify.satacap, 449 at->at_identify.satafsup, 450 (at->at_ncqdepth > 1 ? "YES" : "NO"), 451 (long long)capacity_bytes / (1024 * 1024), 452 (int)(capacity_bytes % (1024 * 1024)) * 100 / (1024 * 1024) 453 ); 454 kprintf("%s: f85=%04x f86=%04x f87=%04x WC=%s RA=%s SEC=%s\n", 455 ATANAME(ap, atx), 456 at->at_identify.features85, 457 at->at_identify.features86, 458 at->at_identify.features87, 459 wcstr, 460 rastr, 461 scstr 462 ); 463 464 /* 465 * Additional type-specific probing 466 */ 467 switch(at->at_type) { 468 case ATA_PORT_T_DISK: 469 error = ahci_cam_probe_disk(ap, atx); 470 break; 471 case ATA_PORT_T_ATAPI: 472 error = ahci_cam_probe_atapi(ap, atx); 473 break; 474 default: 475 error = EIO; 476 break; 477 } 478 err: 479 if (error) { 480 at->at_probe = ATA_PROBE_FAILED; 481 if (atx == NULL) 482 ap->ap_probe = at->at_probe; 483 } else { 484 at->at_probe = ATA_PROBE_GOOD; 485 if (atx == NULL) 486 ap->ap_probe = at->at_probe; 487 } 488 return (error); 489 } 490 491 /* 492 * DISK-specific probe after initial ident 493 */ 494 static int 495 ahci_cam_probe_disk(struct ahci_port *ap, struct ata_port *atx) 496 { 497 struct ata_port *at; 498 struct ata_xfer *xa; 499 500 at = atx ? atx : ap->ap_ata[0]; 501 502 /* 503 * Set dummy xfer mode 504 */ 505 ahci_set_xfer(ap, atx); 506 507 /* 508 * Enable write cache if supported 509 * 510 * NOTE: "WD My Book" external disk devices have a very poor 511 * daughter board between the the ESATA and the HD. Sending 512 * any ATA_C_SET_FEATURES commands will break the hardware port 513 * with a fatal protocol error. However, this device also 514 * indicates that WRITECACHE is already on and READAHEAD is 515 * not supported so we avoid the issue. 516 */ 517 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_WRITECACHE) && 518 (at->at_identify.features85 & ATA_IDENTIFY_WRITECACHE) == 0) { 519 xa = ahci_ata_get_xfer(ap, atx); 520 xa->complete = ahci_ata_dummy_done; 521 xa->fis->command = ATA_C_SET_FEATURES; 522 xa->fis->features = ATA_SF_WRITECACHE_EN; 523 /* xa->fis->features = ATA_SF_LOOKAHEAD_EN; */ 524 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 525 xa->fis->device = 0; 526 xa->flags = ATA_F_PIO | ATA_F_POLL; 527 xa->timeout = 1000; 528 xa->datalen = 0; 529 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE) 530 at->at_features |= ATA_PORT_F_WCACHE; 531 else 532 kprintf("%s: Unable to enable write-caching\n", 533 ATANAME(ap, atx)); 534 ahci_ata_put_xfer(xa); 535 } 536 537 /* 538 * Enable readahead if supported 539 */ 540 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_LOOKAHEAD) && 541 (at->at_identify.features85 & ATA_IDENTIFY_LOOKAHEAD) == 0) { 542 xa = ahci_ata_get_xfer(ap, atx); 543 xa->complete = ahci_ata_dummy_done; 544 xa->fis->command = ATA_C_SET_FEATURES; 545 xa->fis->features = ATA_SF_LOOKAHEAD_EN; 546 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 547 xa->fis->device = 0; 548 xa->flags = ATA_F_PIO | ATA_F_POLL; 549 xa->timeout = 1000; 550 xa->datalen = 0; 551 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE) 552 at->at_features |= ATA_PORT_F_RAHEAD; 553 else 554 kprintf("%s: Unable to enable read-ahead\n", 555 ATANAME(ap, atx)); 556 ahci_ata_put_xfer(xa); 557 } 558 559 /* 560 * FREEZE LOCK the device so malicious users can't lock it on us. 561 * As there is no harm in issuing this to devices that don't 562 * support the security feature set we just send it, and don't bother 563 * checking if the device sends a command abort to tell us it doesn't 564 * support it 565 */ 566 if ((at->at_identify.cmdset82 & ATA_IDENTIFY_SECURITY) && 567 (at->at_identify.securestatus & ATA_SECURE_FROZEN) == 0 && 568 (AhciNoFeatures & (1 << ap->ap_num)) == 0) { 569 xa = ahci_ata_get_xfer(ap, atx); 570 xa->complete = ahci_ata_dummy_done; 571 xa->fis->command = ATA_C_SEC_FREEZE_LOCK; 572 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 573 xa->flags = ATA_F_PIO | ATA_F_POLL; 574 xa->timeout = 1000; 575 xa->datalen = 0; 576 if (ahci_ata_cmd(xa) == ATA_S_COMPLETE) 577 at->at_features |= ATA_PORT_F_FRZLCK; 578 else 579 kprintf("%s: Unable to set security freeze\n", 580 ATANAME(ap, atx)); 581 ahci_ata_put_xfer(xa); 582 } 583 584 return (0); 585 } 586 587 /* 588 * ATAPI-specific probe after initial ident 589 */ 590 static int 591 ahci_cam_probe_atapi(struct ahci_port *ap, struct ata_port *atx) 592 { 593 ahci_set_xfer(ap, atx); 594 return(0); 595 } 596 597 /* 598 * Setting the transfer mode is irrelevant for the SATA transport 599 * but some (atapi) devices seem to need it anyway. In addition 600 * if we are running through a SATA->PATA converter for some reason 601 * beyond my comprehension we might have to set the mode. 602 * 603 * We only support DMA modes for SATA attached devices, so don't bother 604 * with legacy modes. 605 */ 606 static int 607 ahci_set_xfer(struct ahci_port *ap, struct ata_port *atx) 608 { 609 struct ata_port *at; 610 struct ata_xfer *xa; 611 u_int16_t mode; 612 u_int16_t mask; 613 614 at = atx ? atx : ap->ap_ata[0]; 615 616 /* 617 * Figure out the supported UDMA mode. Ignore other legacy modes. 618 */ 619 mask = le16toh(at->at_identify.ultradma); 620 if ((mask & 0xFF) == 0 || mask == 0xFFFF) 621 return(0); 622 mask &= 0xFF; 623 mode = 0x4F; 624 while ((mask & 0x8000) == 0) { 625 mask <<= 1; 626 --mode; 627 } 628 629 /* 630 * SATA atapi devices often still report a dma mode, even though 631 * it is irrelevant for SATA transport. It is also possible that 632 * we are running through a SATA->PATA converter and seeing the 633 * PATA dma mode. 634 * 635 * In this case the device may require a (dummy) SETXFER to be 636 * sent before it will work properly. 637 */ 638 xa = ahci_ata_get_xfer(ap, atx); 639 xa->complete = ahci_ata_dummy_done; 640 xa->fis->command = ATA_C_SET_FEATURES; 641 xa->fis->features = ATA_SF_SETXFER; 642 xa->fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 643 xa->fis->sector_count = mode; 644 xa->flags = ATA_F_PIO | ATA_F_POLL; 645 xa->timeout = 1000; 646 xa->datalen = 0; 647 if (ahci_ata_cmd(xa) != ATA_S_COMPLETE) { 648 kprintf("%s: Unable to set dummy xfer mode \n", 649 ATANAME(ap, atx)); 650 } else if (bootverbose) { 651 kprintf("%s: Set dummy xfer mode to %02x\n", 652 ATANAME(ap, atx), mode); 653 } 654 ahci_ata_put_xfer(xa); 655 return(0); 656 } 657 658 /* 659 * Fix byte ordering so buffers can be accessed as 660 * strings. 661 */ 662 static void 663 ata_fix_identify(struct ata_identify *id) 664 { 665 u_int16_t *swap; 666 int i; 667 668 swap = (u_int16_t *)id->serial; 669 for (i = 0; i < sizeof(id->serial) / sizeof(u_int16_t); i++) 670 swap[i] = bswap16(swap[i]); 671 672 swap = (u_int16_t *)id->firmware; 673 for (i = 0; i < sizeof(id->firmware) / sizeof(u_int16_t); i++) 674 swap[i] = bswap16(swap[i]); 675 676 swap = (u_int16_t *)id->model; 677 for (i = 0; i < sizeof(id->model) / sizeof(u_int16_t); i++) 678 swap[i] = bswap16(swap[i]); 679 } 680 681 /* 682 * Dummy done callback for xa. 683 */ 684 static void 685 ahci_ata_dummy_done(struct ata_xfer *xa) 686 { 687 } 688 689 /* 690 * Use an engineering request to initiate a target scan for devices 691 * behind a port multiplier. 692 * 693 * An asynchronous bus scan is used to avoid reentrancy issues. 694 */ 695 static void 696 ahci_cam_rescan_callback(struct cam_periph *periph, union ccb *ccb) 697 { 698 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 699 700 if (ccb->ccb_h.func_code == XPT_SCAN_BUS) { 701 ap->ap_flags &= ~AP_F_SCAN_RUNNING; 702 if (ap->ap_flags & AP_F_SCAN_REQUESTED) { 703 ap->ap_flags &= ~AP_F_SCAN_REQUESTED; 704 ahci_cam_rescan(ap); 705 } 706 ap->ap_flags |= AP_F_SCAN_COMPLETED; 707 wakeup(&ap->ap_flags); 708 } 709 xpt_free_ccb(ccb); 710 } 711 712 static void 713 ahci_cam_rescan(struct ahci_port *ap) 714 { 715 struct cam_path *path; 716 union ccb *ccb; 717 int status; 718 int i; 719 720 if (ap->ap_flags & AP_F_SCAN_RUNNING) { 721 ap->ap_flags |= AP_F_SCAN_REQUESTED; 722 return; 723 } 724 ap->ap_flags |= AP_F_SCAN_RUNNING; 725 for (i = 0; i < AHCI_MAX_PMPORTS; ++i) { 726 ap->ap_ata[i]->at_features |= ATA_PORT_F_RESCAN; 727 } 728 729 status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim), 730 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); 731 if (status != CAM_REQ_CMP) 732 return; 733 734 ccb = xpt_alloc_ccb(); 735 xpt_setup_ccb(&ccb->ccb_h, path, 5); /* 5 = low priority */ 736 ccb->ccb_h.func_code = XPT_ENG_EXEC; 737 ccb->ccb_h.cbfcnp = ahci_cam_rescan_callback; 738 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 739 ccb->crcn.flags = CAM_FLAG_NONE; 740 xpt_action_async(ccb); 741 } 742 743 static void 744 ahci_xpt_rescan(struct ahci_port *ap) 745 { 746 struct cam_path *path; 747 union ccb *ccb; 748 int status; 749 750 status = xpt_create_path(&path, xpt_periph, cam_sim_path(ap->ap_sim), 751 CAM_TARGET_WILDCARD, CAM_LUN_WILDCARD); 752 if (status != CAM_REQ_CMP) 753 return; 754 755 ccb = xpt_alloc_ccb(); 756 xpt_setup_ccb(&ccb->ccb_h, path, 5); /* 5 = low priority */ 757 ccb->ccb_h.func_code = XPT_SCAN_BUS; 758 ccb->ccb_h.cbfcnp = ahci_cam_rescan_callback; 759 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 760 ccb->crcn.flags = CAM_FLAG_NONE; 761 xpt_action_async(ccb); 762 } 763 764 /* 765 * Action function - dispatch command 766 */ 767 static 768 void 769 ahci_xpt_action(struct cam_sim *sim, union ccb *ccb) 770 { 771 struct ahci_port *ap; 772 struct ata_port *at, *atx; 773 struct ccb_hdr *ccbh; 774 int unit; 775 776 /* XXX lock */ 777 ap = cam_sim_softc(sim); 778 atx = NULL; 779 KKASSERT(ap != NULL); 780 ccbh = &ccb->ccb_h; 781 unit = cam_sim_unit(sim); 782 783 /* 784 * Early failure checks. These checks do not apply to XPT_PATH_INQ, 785 * otherwise the bus rescan will not remove the dead devices when 786 * unplugging a PM. 787 * 788 * For non-wildcards we have one target (0) and one lun (0), 789 * unless we have a port multiplier. 790 * 791 * A wildcard target indicates only the general bus is being 792 * probed. 793 * 794 * Calculate at and atx. at is always non-NULL. atx is only 795 * non-NULL for direct-attached devices. It will be NULL for 796 * devices behind a port multiplier. 797 * 798 * XXX What do we do with a LUN wildcard? 799 */ 800 if (ccbh->target_id != CAM_TARGET_WILDCARD && 801 ccbh->func_code != XPT_PATH_INQ) { 802 if (ap->ap_type == ATA_PORT_T_NONE) { 803 ccbh->status = CAM_DEV_NOT_THERE; 804 xpt_done(ccb); 805 return; 806 } 807 if (ccbh->target_id < 0 || ccbh->target_id >= ap->ap_pmcount) { 808 ccbh->status = CAM_DEV_NOT_THERE; 809 xpt_done(ccb); 810 return; 811 } 812 at = ap->ap_ata[ccbh->target_id]; 813 if (ap->ap_type == ATA_PORT_T_PM) 814 atx = at; 815 816 if (ccbh->target_lun != CAM_LUN_WILDCARD && ccbh->target_lun) { 817 ccbh->status = CAM_DEV_NOT_THERE; 818 xpt_done(ccb); 819 return; 820 } 821 } else { 822 at = ap->ap_ata[0]; 823 } 824 825 /* 826 * Switch on the meta XPT command 827 */ 828 switch(ccbh->func_code) { 829 case XPT_ENG_EXEC: 830 /* 831 * This routine is called after a port multiplier has been 832 * probed. 833 */ 834 ccbh->status = CAM_REQ_CMP; 835 ahci_os_lock_port(ap); 836 ahci_port_state_machine(ap, 0); 837 ahci_os_unlock_port(ap); 838 xpt_done(ccb); 839 ahci_xpt_rescan(ap); 840 break; 841 case XPT_PATH_INQ: 842 /* 843 * This command always succeeds, otherwise the bus scan 844 * will not detach dead devices. 845 */ 846 ccb->cpi.version_num = 1; 847 ccb->cpi.hba_inquiry = 0; 848 ccb->cpi.target_sprt = 0; 849 ccb->cpi.hba_misc = PIM_SEQSCAN; 850 ccb->cpi.hba_eng_cnt = 0; 851 bzero(ccb->cpi.vuhba_flags, sizeof(ccb->cpi.vuhba_flags)); 852 ccb->cpi.max_target = AHCI_MAX_PMPORTS - 1; 853 ccb->cpi.max_lun = 0; 854 ccb->cpi.async_flags = 0; 855 ccb->cpi.hpath_id = 0; 856 ccb->cpi.initiator_id = AHCI_MAX_PMPORTS - 1; 857 ccb->cpi.unit_number = cam_sim_unit(sim); 858 ccb->cpi.bus_id = cam_sim_bus(sim); 859 ccb->cpi.base_transfer_speed = 150000; 860 ccb->cpi.transport = XPORT_SATA; 861 ccb->cpi.transport_version = 1; 862 ccb->cpi.protocol = PROTO_SCSI; 863 ccb->cpi.protocol_version = SCSI_REV_2; 864 865 ccbh->status = CAM_REQ_CMP; 866 if (ccbh->target_id == CAM_TARGET_WILDCARD) { 867 ahci_os_lock_port(ap); 868 ahci_port_state_machine(ap, 0); 869 ahci_os_unlock_port(ap); 870 } else { 871 switch(ahci_pread(ap, AHCI_PREG_SSTS) & 872 AHCI_PREG_SSTS_SPD) { 873 case AHCI_PREG_SSTS_SPD_GEN1: 874 ccb->cpi.base_transfer_speed = 150000; 875 break; 876 case AHCI_PREG_SSTS_SPD_GEN2: 877 ccb->cpi.base_transfer_speed = 300000; 878 break; 879 case AHCI_PREG_SSTS_SPD_GEN3: 880 ccb->cpi.base_transfer_speed = 600000; 881 break; 882 default: 883 /* unknown */ 884 ccb->cpi.base_transfer_speed = 1000; 885 break; 886 } 887 #if 0 888 if (ap->ap_type == ATA_PORT_T_NONE) 889 ccbh->status = CAM_DEV_NOT_THERE; 890 #endif 891 } 892 xpt_done(ccb); 893 break; 894 case XPT_RESET_DEV: 895 ahci_os_lock_port(ap); 896 if (ap->ap_type == ATA_PORT_T_NONE) { 897 ccbh->status = CAM_DEV_NOT_THERE; 898 } else { 899 ahci_port_reset(ap, atx, 0); 900 ccbh->status = CAM_REQ_CMP; 901 } 902 ahci_os_unlock_port(ap); 903 xpt_done(ccb); 904 break; 905 case XPT_RESET_BUS: 906 ahci_os_lock_port(ap); 907 ahci_port_reset(ap, NULL, 1); 908 ahci_os_unlock_port(ap); 909 ccbh->status = CAM_REQ_CMP; 910 xpt_done(ccb); 911 break; 912 case XPT_SET_TRAN_SETTINGS: 913 ccbh->status = CAM_FUNC_NOTAVAIL; 914 xpt_done(ccb); 915 break; 916 case XPT_GET_TRAN_SETTINGS: 917 ccb->cts.protocol = PROTO_SCSI; 918 ccb->cts.protocol_version = SCSI_REV_2; 919 ccb->cts.transport = XPORT_SATA; 920 ccb->cts.transport_version = XPORT_VERSION_UNSPECIFIED; 921 ccb->cts.proto_specific.valid = 0; 922 ccb->cts.xport_specific.valid = 0; 923 ccbh->status = CAM_REQ_CMP; 924 xpt_done(ccb); 925 break; 926 case XPT_CALC_GEOMETRY: 927 cam_calc_geometry(&ccb->ccg, 1); 928 xpt_done(ccb); 929 break; 930 case XPT_SCSI_IO: 931 /* 932 * Our parallel startup code might have only probed through 933 * to the IDENT, so do the last step if necessary. 934 */ 935 if (at->at_probe == ATA_PROBE_NEED_IDENT) 936 ahci_cam_probe(ap, atx); 937 if (at->at_probe != ATA_PROBE_GOOD) { 938 ccbh->status = CAM_DEV_NOT_THERE; 939 xpt_done(ccb); 940 break; 941 } 942 switch(at->at_type) { 943 case ATA_PORT_T_DISK: 944 ahci_xpt_scsi_disk_io(ap, atx, ccb); 945 break; 946 case ATA_PORT_T_ATAPI: 947 ahci_xpt_scsi_atapi_io(ap, atx, ccb); 948 break; 949 default: 950 ccbh->status = CAM_REQ_INVALID; 951 xpt_done(ccb); 952 break; 953 } 954 break; 955 default: 956 ccbh->status = CAM_REQ_INVALID; 957 xpt_done(ccb); 958 break; 959 } 960 } 961 962 /* 963 * Poll function. 964 * 965 * Generally this function gets called heavily when interrupts might be 966 * non-operational, during a halt/reboot or panic. 967 */ 968 static 969 void 970 ahci_xpt_poll(struct cam_sim *sim) 971 { 972 struct ahci_port *ap; 973 974 ap = cam_sim_softc(sim); 975 crit_enter(); 976 ahci_os_lock_port(ap); 977 ahci_port_intr(ap, 1); 978 ahci_os_unlock_port(ap); 979 crit_exit(); 980 } 981 982 /* 983 * Convert the SCSI command in ccb to an ata_xfer command in xa 984 * for ATA_PORT_T_DISK operations. Set the completion function 985 * to convert the response back, then dispatch to the OpenBSD AHCI 986 * layer. 987 * 988 * AHCI DISK commands only support a limited command set, and we 989 * fake additional commands to make it play nice with the CAM subsystem. 990 */ 991 static 992 void 993 ahci_xpt_scsi_disk_io(struct ahci_port *ap, struct ata_port *atx, 994 union ccb *ccb) 995 { 996 struct ccb_hdr *ccbh; 997 struct ccb_scsiio *csio; 998 struct ata_xfer *xa; 999 struct ata_port *at; 1000 struct ata_fis_h2d *fis; 1001 struct ata_pass_12 *atp12; 1002 struct ata_pass_16 *atp16; 1003 scsi_cdb_t cdb; 1004 union scsi_data *rdata; 1005 int rdata_len; 1006 u_int64_t capacity; 1007 u_int64_t lba; 1008 u_int32_t count; 1009 1010 ccbh = &ccb->csio.ccb_h; 1011 csio = &ccb->csio; 1012 at = atx ? atx : ap->ap_ata[0]; 1013 1014 /* 1015 * XXX not passing NULL at for direct attach! 1016 */ 1017 xa = ahci_ata_get_xfer(ap, atx); 1018 rdata = (void *)csio->data_ptr; 1019 rdata_len = csio->dxfer_len; 1020 1021 /* 1022 * Build the FIS or process the csio to completion. 1023 */ 1024 cdb = (void *)((ccbh->flags & CAM_CDB_POINTER) ? 1025 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes); 1026 1027 switch(cdb->generic.opcode) { 1028 case REQUEST_SENSE: 1029 /* 1030 * Auto-sense everything, so explicit sense requests 1031 * return no-sense. 1032 */ 1033 ccbh->status = CAM_SCSI_STATUS_ERROR; 1034 break; 1035 case INQUIRY: 1036 /* 1037 * Inquiry supported features 1038 * 1039 * [opcode, byte2, page_code, length, control] 1040 */ 1041 if (cdb->inquiry.byte2 & SI_EVPD) { 1042 ahci_xpt_page_inquiry(ap, at, ccb); 1043 } else { 1044 bzero(rdata, rdata_len); 1045 if (rdata_len < SHORT_INQUIRY_LENGTH) { 1046 ccbh->status = CAM_CCB_LEN_ERR; 1047 break; 1048 } 1049 if (rdata_len > sizeof(rdata->inquiry_data)) 1050 rdata_len = sizeof(rdata->inquiry_data); 1051 rdata->inquiry_data.device = T_DIRECT; 1052 rdata->inquiry_data.version = SCSI_REV_SPC2; 1053 rdata->inquiry_data.response_format = 2; 1054 rdata->inquiry_data.additional_length = 32; 1055 bcopy("SATA ", rdata->inquiry_data.vendor, 8); 1056 bcopy(at->at_identify.model, 1057 rdata->inquiry_data.product, 1058 sizeof(rdata->inquiry_data.product)); 1059 bcopy(at->at_identify.firmware, 1060 rdata->inquiry_data.revision, 1061 sizeof(rdata->inquiry_data.revision)); 1062 ccbh->status = CAM_REQ_CMP; 1063 } 1064 break; 1065 case READ_CAPACITY_16: 1066 if (cdb->read_capacity_16.service_action != SRC16_SERVICE_ACTION) { 1067 ccbh->status = CAM_REQ_INVALID; 1068 break; 1069 } 1070 if (rdata_len < sizeof(rdata->read_capacity_data_16)) { 1071 ccbh->status = CAM_CCB_LEN_ERR; 1072 break; 1073 } 1074 /* fall through */ 1075 case READ_CAPACITY: 1076 if (rdata_len < sizeof(rdata->read_capacity_data)) { 1077 ccbh->status = CAM_CCB_LEN_ERR; 1078 break; 1079 } 1080 1081 capacity = at->at_capacity; 1082 1083 bzero(rdata, rdata_len); 1084 if (cdb->generic.opcode == READ_CAPACITY) { 1085 rdata_len = sizeof(rdata->read_capacity_data); 1086 if (capacity > 0xFFFFFFFFU) 1087 capacity = 0xFFFFFFFFU; 1088 bzero(&rdata->read_capacity_data, rdata_len); 1089 scsi_ulto4b((u_int32_t)capacity - 1, 1090 rdata->read_capacity_data.addr); 1091 scsi_ulto4b(512, rdata->read_capacity_data.length); 1092 } else { 1093 rdata_len = sizeof(rdata->read_capacity_data_16); 1094 bzero(&rdata->read_capacity_data_16, rdata_len); 1095 scsi_u64to8b(capacity - 1, 1096 rdata->read_capacity_data_16.addr); 1097 scsi_ulto4b(512, rdata->read_capacity_data_16.length); 1098 } 1099 ccbh->status = CAM_REQ_CMP; 1100 break; 1101 case SYNCHRONIZE_CACHE: 1102 /* 1103 * Synchronize cache. Specification says this can take 1104 * greater then 30 seconds so give it at least 45. 1105 */ 1106 fis = xa->fis; 1107 fis->flags = ATA_H2D_FLAGS_CMD; 1108 fis->command = ATA_C_FLUSH_CACHE; 1109 fis->device = 0; 1110 if (xa->timeout < 45000) 1111 xa->timeout = 45000; 1112 xa->datalen = 0; 1113 xa->flags = 0; 1114 xa->complete = ahci_ata_complete_disk_synchronize_cache; 1115 break; 1116 case TEST_UNIT_READY: 1117 case START_STOP_UNIT: 1118 case PREVENT_ALLOW: 1119 /* 1120 * Just silently return success 1121 */ 1122 ccbh->status = CAM_REQ_CMP; 1123 rdata_len = 0; 1124 break; 1125 case ATA_PASS_12: 1126 atp12 = &cdb->ata_pass_12; 1127 fis = xa->fis; 1128 /* 1129 * Figure out the flags to be used, depending on the direction of the 1130 * CAM request. 1131 */ 1132 switch (ccbh->flags & CAM_DIR_MASK) { 1133 case CAM_DIR_IN: 1134 xa->flags = ATA_F_READ; 1135 break; 1136 case CAM_DIR_OUT: 1137 xa->flags = ATA_F_WRITE; 1138 break; 1139 default: 1140 xa->flags = 0; 1141 } 1142 xa->flags |= ATA_F_POLL | ATA_F_EXCLUSIVE; 1143 xa->data = csio->data_ptr; 1144 xa->datalen = csio->dxfer_len; 1145 xa->complete = ahci_ata_complete_disk_rw; 1146 xa->timeout = ccbh->timeout; 1147 1148 /* 1149 * Populate the fis from the information we received through CAM 1150 * ATA passthrough. 1151 */ 1152 fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp12->flags ? */ 1153 fis->features = atp12->features; 1154 fis->sector_count = atp12->sector_count; 1155 fis->lba_low = atp12->lba_low; 1156 fis->lba_mid = atp12->lba_mid; 1157 fis->lba_high = atp12->lba_high; 1158 fis->device = atp12->device; /* maybe always 0? */ 1159 fis->command = atp12->command; 1160 fis->control = atp12->control; 1161 1162 /* 1163 * Mark as in progress so it is sent to the device. 1164 */ 1165 ccbh->status = CAM_REQ_INPROG; 1166 break; 1167 case ATA_PASS_16: 1168 atp16 = &cdb->ata_pass_16; 1169 fis = xa->fis; 1170 /* 1171 * Figure out the flags to be used, depending on the direction of the 1172 * CAM request. 1173 */ 1174 switch (ccbh->flags & CAM_DIR_MASK) { 1175 case CAM_DIR_IN: 1176 xa->flags = ATA_F_READ; 1177 break; 1178 case CAM_DIR_OUT: 1179 xa->flags = ATA_F_WRITE; 1180 break; 1181 default: 1182 xa->flags = 0; 1183 } 1184 xa->flags |= ATA_F_POLL | ATA_F_EXCLUSIVE; 1185 xa->data = csio->data_ptr; 1186 xa->datalen = csio->dxfer_len; 1187 xa->complete = ahci_ata_complete_disk_rw; 1188 xa->timeout = ccbh->timeout; 1189 1190 /* 1191 * Populate the fis from the information we received through CAM 1192 * ATA passthrough. 1193 */ 1194 fis->flags = ATA_H2D_FLAGS_CMD; /* maybe also atp16->flags ? */ 1195 fis->features = atp16->features; 1196 fis->features_exp = atp16->features_ext; 1197 fis->sector_count = atp16->sector_count; 1198 fis->sector_count_exp = atp16->sector_count_ext; 1199 fis->lba_low = atp16->lba_low; 1200 fis->lba_low_exp = atp16->lba_low_ext; 1201 fis->lba_mid = atp16->lba_mid; 1202 fis->lba_mid_exp = atp16->lba_mid_ext; 1203 fis->lba_high = atp16->lba_high; 1204 fis->lba_mid_exp = atp16->lba_mid_ext; 1205 fis->device = atp16->device; /* maybe always 0? */ 1206 fis->command = atp16->command; 1207 1208 /* 1209 * Mark as in progress so it is sent to the device. 1210 */ 1211 ccbh->status = CAM_REQ_INPROG; 1212 break; 1213 default: 1214 switch(cdb->generic.opcode) { 1215 case READ_6: 1216 lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF; 1217 count = cdb->rw_6.length ? cdb->rw_6.length : 0x100; 1218 xa->flags = ATA_F_READ; 1219 break; 1220 case READ_10: 1221 lba = scsi_4btoul(cdb->rw_10.addr); 1222 count = scsi_2btoul(cdb->rw_10.length); 1223 xa->flags = ATA_F_READ; 1224 break; 1225 case READ_12: 1226 lba = scsi_4btoul(cdb->rw_12.addr); 1227 count = scsi_4btoul(cdb->rw_12.length); 1228 xa->flags = ATA_F_READ; 1229 break; 1230 case READ_16: 1231 lba = scsi_8btou64(cdb->rw_16.addr); 1232 count = scsi_4btoul(cdb->rw_16.length); 1233 xa->flags = ATA_F_READ; 1234 break; 1235 case WRITE_6: 1236 lba = scsi_3btoul(cdb->rw_6.addr) & 0x1FFFFF; 1237 count = cdb->rw_6.length ? cdb->rw_6.length : 0x100; 1238 xa->flags = ATA_F_WRITE; 1239 break; 1240 case WRITE_10: 1241 lba = scsi_4btoul(cdb->rw_10.addr); 1242 count = scsi_2btoul(cdb->rw_10.length); 1243 xa->flags = ATA_F_WRITE; 1244 break; 1245 case WRITE_12: 1246 lba = scsi_4btoul(cdb->rw_12.addr); 1247 count = scsi_4btoul(cdb->rw_12.length); 1248 xa->flags = ATA_F_WRITE; 1249 break; 1250 case WRITE_16: 1251 lba = scsi_8btou64(cdb->rw_16.addr); 1252 count = scsi_4btoul(cdb->rw_16.length); 1253 xa->flags = ATA_F_WRITE; 1254 break; 1255 default: 1256 ccbh->status = CAM_REQ_INVALID; 1257 break; 1258 } 1259 if (ccbh->status != CAM_REQ_INPROG) 1260 break; 1261 1262 fis = xa->fis; 1263 fis->flags = ATA_H2D_FLAGS_CMD; 1264 fis->lba_low = (u_int8_t)lba; 1265 fis->lba_mid = (u_int8_t)(lba >> 8); 1266 fis->lba_high = (u_int8_t)(lba >> 16); 1267 fis->device = ATA_H2D_DEVICE_LBA; 1268 1269 /* 1270 * NCQ only for direct-attached disks, do not currently 1271 * try to use NCQ with port multipliers. 1272 */ 1273 if (at->at_ncqdepth > 1 && 1274 ap->ap_type == ATA_PORT_T_DISK && 1275 (ap->ap_sc->sc_cap & AHCI_REG_CAP_SNCQ) && 1276 (ccbh->flags & CAM_POLLED) == 0) { 1277 /* 1278 * Use NCQ - always uses 48 bit addressing 1279 */ 1280 xa->flags |= ATA_F_NCQ; 1281 fis->command = (xa->flags & ATA_F_WRITE) ? 1282 ATA_C_WRITE_FPDMA : ATA_C_READ_FPDMA; 1283 fis->lba_low_exp = (u_int8_t)(lba >> 24); 1284 fis->lba_mid_exp = (u_int8_t)(lba >> 32); 1285 fis->lba_high_exp = (u_int8_t)(lba >> 40); 1286 fis->sector_count = xa->tag << 3; 1287 fis->features = (u_int8_t)count; 1288 fis->features_exp = (u_int8_t)(count >> 8); 1289 } else if (count > 0x100 || lba > 0x0FFFFFFFU) { 1290 /* 1291 * Use LBA48 1292 */ 1293 fis->command = (xa->flags & ATA_F_WRITE) ? 1294 ATA_C_WRITEDMA_EXT : ATA_C_READDMA_EXT; 1295 fis->lba_low_exp = (u_int8_t)(lba >> 24); 1296 fis->lba_mid_exp = (u_int8_t)(lba >> 32); 1297 fis->lba_high_exp = (u_int8_t)(lba >> 40); 1298 fis->sector_count = (u_int8_t)count; 1299 fis->sector_count_exp = (u_int8_t)(count >> 8); 1300 } else { 1301 /* 1302 * Use LBA 1303 * 1304 * NOTE: 256 sectors is supported, stored as 0. 1305 */ 1306 fis->command = (xa->flags & ATA_F_WRITE) ? 1307 ATA_C_WRITEDMA : ATA_C_READDMA; 1308 fis->device |= (u_int8_t)(lba >> 24) & 0x0F; 1309 fis->sector_count = (u_int8_t)count; 1310 } 1311 1312 xa->data = csio->data_ptr; 1313 xa->datalen = csio->dxfer_len; 1314 xa->complete = ahci_ata_complete_disk_rw; 1315 xa->timeout = ccbh->timeout; /* milliseconds */ 1316 #if 0 1317 if (xa->timeout > 10000) /* XXX - debug */ 1318 xa->timeout = 10000; 1319 #endif 1320 if (ccbh->flags & CAM_POLLED) 1321 xa->flags |= ATA_F_POLL; 1322 break; 1323 } 1324 1325 /* 1326 * If the request is still in progress the xa and FIS have 1327 * been set up (except for the PM target), and must be dispatched. 1328 * Otherwise the request was completed. 1329 */ 1330 if (ccbh->status == CAM_REQ_INPROG) { 1331 KKASSERT(xa->complete != NULL); 1332 xa->atascsi_private = ccb; 1333 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 1334 ahci_os_lock_port(ap); 1335 xa->fis->flags |= at->at_target; 1336 ahci_ata_cmd(xa); 1337 ahci_os_unlock_port(ap); 1338 } else { 1339 ahci_ata_put_xfer(xa); 1340 xpt_done(ccb); 1341 } 1342 } 1343 1344 /* 1345 * Convert the SCSI command in ccb to an ata_xfer command in xa 1346 * for ATA_PORT_T_ATAPI operations. Set the completion function 1347 * to convert the response back, then dispatch to the OpenBSD AHCI 1348 * layer. 1349 */ 1350 static 1351 void 1352 ahci_xpt_scsi_atapi_io(struct ahci_port *ap, struct ata_port *atx, 1353 union ccb *ccb) 1354 { 1355 struct ccb_hdr *ccbh; 1356 struct ccb_scsiio *csio; 1357 struct ata_xfer *xa; 1358 struct ata_fis_h2d *fis; 1359 scsi_cdb_t cdbs; 1360 scsi_cdb_t cdbd; 1361 int flags; 1362 struct ata_port *at; 1363 1364 ccbh = &ccb->csio.ccb_h; 1365 csio = &ccb->csio; 1366 at = atx ? atx : ap->ap_ata[0]; 1367 1368 switch (ccbh->flags & CAM_DIR_MASK) { 1369 case CAM_DIR_IN: 1370 flags = ATA_F_PACKET | ATA_F_READ; 1371 break; 1372 case CAM_DIR_OUT: 1373 flags = ATA_F_PACKET | ATA_F_WRITE; 1374 break; 1375 case CAM_DIR_NONE: 1376 flags = ATA_F_PACKET; 1377 break; 1378 default: 1379 ccbh->status = CAM_REQ_INVALID; 1380 xpt_done(ccb); 1381 return; 1382 /* NOT REACHED */ 1383 } 1384 1385 /* 1386 * Special handling to get the rfis back into host memory while 1387 * still allowing the chip to run commands in parallel to 1388 * ATAPI devices behind a PM. 1389 */ 1390 flags |= ATA_F_AUTOSENSE; 1391 1392 /* 1393 * The command has to fit in the packet command buffer. 1394 */ 1395 if (csio->cdb_len < 6 || csio->cdb_len > 16) { 1396 ccbh->status = CAM_CCB_LEN_ERR; 1397 xpt_done(ccb); 1398 return; 1399 } 1400 1401 /* 1402 * Initialize the XA and FIS. It is unclear how much of 1403 * this has to mimic the equivalent ATA command. 1404 * 1405 * XXX not passing NULL at for direct attach! 1406 */ 1407 xa = ahci_ata_get_xfer(ap, atx); 1408 fis = xa->fis; 1409 1410 fis->flags = ATA_H2D_FLAGS_CMD | at->at_target; 1411 fis->command = ATA_C_PACKET; 1412 fis->device = ATA_H2D_DEVICE_LBA; 1413 fis->sector_count = xa->tag << 3; 1414 if (flags & (ATA_F_READ | ATA_F_WRITE)) { 1415 if (flags & ATA_F_WRITE) { 1416 fis->features = ATA_H2D_FEATURES_DMA | 1417 ATA_H2D_FEATURES_DIR_WRITE; 1418 } else { 1419 fis->features = ATA_H2D_FEATURES_DMA | 1420 ATA_H2D_FEATURES_DIR_READ; 1421 } 1422 } else { 1423 fis->lba_mid = 0; 1424 fis->lba_high = 0; 1425 } 1426 fis->control = ATA_FIS_CONTROL_4BIT; 1427 1428 xa->flags = flags; 1429 xa->data = csio->data_ptr; 1430 xa->datalen = csio->dxfer_len; 1431 xa->timeout = ccbh->timeout; /* milliseconds */ 1432 1433 if (ccbh->flags & CAM_POLLED) 1434 xa->flags |= ATA_F_POLL; 1435 1436 /* 1437 * Copy the cdb to the packetcmd buffer in the FIS using a 1438 * convenient pointer in the xa. 1439 * 1440 * Zero-out any trailing bytes in case the ATAPI device cares. 1441 */ 1442 cdbs = (void *)((ccbh->flags & CAM_CDB_POINTER) ? 1443 csio->cdb_io.cdb_ptr : csio->cdb_io.cdb_bytes); 1444 bcopy(cdbs, xa->packetcmd, csio->cdb_len); 1445 if (csio->cdb_len < 16) 1446 bzero(xa->packetcmd + csio->cdb_len, 16 - csio->cdb_len); 1447 1448 #if 0 1449 kprintf("opcode %d cdb_len %d dxfer_len %d\n", 1450 cdbs->generic.opcode, 1451 csio->cdb_len, csio->dxfer_len); 1452 #endif 1453 1454 /* 1455 * Some ATAPI commands do not actually follow the SCSI standard. 1456 */ 1457 cdbd = (void *)xa->packetcmd; 1458 1459 switch(cdbd->generic.opcode) { 1460 case REQUEST_SENSE: 1461 /* 1462 * Force SENSE requests to the ATAPI sense length. 1463 * 1464 * It is unclear if this is needed or not. 1465 */ 1466 if (cdbd->sense.length == SSD_FULL_SIZE) { 1467 if (bootverbose) { 1468 kprintf("%s: Shortening sense request\n", 1469 PORTNAME(ap)); 1470 } 1471 cdbd->sense.length = offsetof(struct scsi_sense_data, 1472 extra_bytes[0]); 1473 } 1474 break; 1475 case INQUIRY: 1476 /* 1477 * Some ATAPI devices can't handle long inquiry lengths, 1478 * don't ask me why. Truncate the inquiry length. 1479 */ 1480 if (cdbd->inquiry.page_code == 0 && 1481 cdbd->inquiry.length > SHORT_INQUIRY_LENGTH) { 1482 cdbd->inquiry.length = SHORT_INQUIRY_LENGTH; 1483 } 1484 break; 1485 case READ_6: 1486 case WRITE_6: 1487 /* 1488 * Convert *_6 to *_10 commands. Most ATAPI devices 1489 * cannot handle the SCSI READ_6 and WRITE_6 commands. 1490 */ 1491 cdbd->rw_10.opcode |= 0x20; 1492 cdbd->rw_10.byte2 = 0; 1493 cdbd->rw_10.addr[0] = cdbs->rw_6.addr[0] & 0x1F; 1494 cdbd->rw_10.addr[1] = cdbs->rw_6.addr[1]; 1495 cdbd->rw_10.addr[2] = cdbs->rw_6.addr[2]; 1496 cdbd->rw_10.addr[3] = 0; 1497 cdbd->rw_10.reserved = 0; 1498 cdbd->rw_10.length[0] = 0; 1499 cdbd->rw_10.length[1] = cdbs->rw_6.length; 1500 cdbd->rw_10.control = cdbs->rw_6.control; 1501 break; 1502 default: 1503 break; 1504 } 1505 1506 /* 1507 * And dispatch 1508 */ 1509 xa->complete = ahci_atapi_complete_cmd; 1510 xa->atascsi_private = ccb; 1511 ccb->ccb_h.sim_priv.entries[0].ptr = ap; 1512 ahci_os_lock_port(ap); 1513 ahci_ata_cmd(xa); 1514 ahci_os_unlock_port(ap); 1515 } 1516 1517 /* 1518 * Simulate page inquiries for disk attachments. 1519 */ 1520 static 1521 void 1522 ahci_xpt_page_inquiry(struct ahci_port *ap, struct ata_port *at, union ccb *ccb) 1523 { 1524 union { 1525 struct scsi_vpd_supported_page_list list; 1526 struct scsi_vpd_unit_serial_number serno; 1527 struct scsi_vpd_unit_devid devid; 1528 char buf[256]; 1529 } *page; 1530 scsi_cdb_t cdb; 1531 int i; 1532 int j; 1533 int len; 1534 1535 page = kmalloc(sizeof(*page), M_DEVBUF, M_WAITOK | M_ZERO); 1536 1537 cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1538 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes); 1539 1540 switch(cdb->inquiry.page_code) { 1541 case SVPD_SUPPORTED_PAGE_LIST: 1542 i = 0; 1543 page->list.device = T_DIRECT; 1544 page->list.page_code = SVPD_SUPPORTED_PAGE_LIST; 1545 page->list.list[i++] = SVPD_SUPPORTED_PAGE_LIST; 1546 page->list.list[i++] = SVPD_UNIT_SERIAL_NUMBER; 1547 page->list.list[i++] = SVPD_UNIT_DEVID; 1548 page->list.length = i; 1549 len = offsetof(struct scsi_vpd_supported_page_list, list[3]); 1550 break; 1551 case SVPD_UNIT_SERIAL_NUMBER: 1552 i = 0; 1553 j = sizeof(at->at_identify.serial); 1554 for (i = 0; i < j && at->at_identify.serial[i] == ' '; ++i) 1555 ; 1556 while (j > i && at->at_identify.serial[j-1] == ' ') 1557 --j; 1558 page->serno.device = T_DIRECT; 1559 page->serno.page_code = SVPD_UNIT_SERIAL_NUMBER; 1560 page->serno.length = j - i; 1561 bcopy(at->at_identify.serial + i, 1562 page->serno.serial_num, j - i); 1563 len = offsetof(struct scsi_vpd_unit_serial_number, 1564 serial_num[j-i]); 1565 break; 1566 case SVPD_UNIT_DEVID: 1567 /* fall through for now */ 1568 default: 1569 ccb->ccb_h.status = CAM_FUNC_NOTAVAIL; 1570 len = 0; 1571 break; 1572 } 1573 if (ccb->ccb_h.status == CAM_REQ_INPROG) { 1574 if (len <= ccb->csio.dxfer_len) { 1575 ccb->ccb_h.status = CAM_REQ_CMP; 1576 bzero(ccb->csio.data_ptr, ccb->csio.dxfer_len); 1577 bcopy(page, ccb->csio.data_ptr, len); 1578 ccb->csio.resid = ccb->csio.dxfer_len - len; 1579 } else { 1580 ccb->ccb_h.status = CAM_CCB_LEN_ERR; 1581 } 1582 } 1583 kfree(page, M_DEVBUF); 1584 } 1585 1586 /* 1587 * Completion function for ATA_PORT_T_DISK cache synchronization. 1588 */ 1589 static 1590 void 1591 ahci_ata_complete_disk_synchronize_cache(struct ata_xfer *xa) 1592 { 1593 union ccb *ccb = xa->atascsi_private; 1594 struct ccb_hdr *ccbh = &ccb->ccb_h; 1595 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 1596 1597 switch(xa->state) { 1598 case ATA_S_COMPLETE: 1599 ccbh->status = CAM_REQ_CMP; 1600 ccb->csio.scsi_status = SCSI_STATUS_OK; 1601 break; 1602 case ATA_S_ERROR: 1603 kprintf("%s: synchronize_cache: error\n", 1604 ATANAME(ap, xa->at)); 1605 ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID; 1606 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1607 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1608 break; 1609 case ATA_S_TIMEOUT: 1610 kprintf("%s: synchronize_cache: timeout\n", 1611 ATANAME(ap, xa->at)); 1612 ccbh->status = CAM_CMD_TIMEOUT; 1613 break; 1614 default: 1615 kprintf("%s: synchronize_cache: unknown state %d\n", 1616 ATANAME(ap, xa->at), xa->state); 1617 ccbh->status = CAM_REQ_CMP_ERR; 1618 break; 1619 } 1620 ahci_ata_put_xfer(xa); 1621 ahci_os_unlock_port(ap); 1622 xpt_done(ccb); 1623 ahci_os_lock_port(ap); 1624 } 1625 1626 /* 1627 * Completion function for ATA_PORT_T_DISK I/O 1628 */ 1629 static 1630 void 1631 ahci_ata_complete_disk_rw(struct ata_xfer *xa) 1632 { 1633 union ccb *ccb = xa->atascsi_private; 1634 struct ccb_hdr *ccbh = &ccb->ccb_h; 1635 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 1636 1637 switch(xa->state) { 1638 case ATA_S_COMPLETE: 1639 ccbh->status = CAM_REQ_CMP; 1640 ccb->csio.scsi_status = SCSI_STATUS_OK; 1641 break; 1642 case ATA_S_ERROR: 1643 kprintf("%s: disk_rw: error\n", ATANAME(ap, xa->at)); 1644 ccbh->status = CAM_SCSI_STATUS_ERROR | CAM_AUTOSNS_VALID; 1645 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1646 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1647 break; 1648 case ATA_S_TIMEOUT: 1649 kprintf("%s: disk_rw: timeout\n", ATANAME(ap, xa->at)); 1650 ccbh->status = CAM_CMD_TIMEOUT; 1651 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1652 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1653 break; 1654 default: 1655 kprintf("%s: disk_rw: unknown state %d\n", 1656 ATANAME(ap, xa->at), xa->state); 1657 ccbh->status = CAM_REQ_CMP_ERR; 1658 break; 1659 } 1660 ccb->csio.resid = xa->resid; 1661 ahci_ata_put_xfer(xa); 1662 ahci_os_unlock_port(ap); 1663 xpt_done(ccb); 1664 ahci_os_lock_port(ap); 1665 } 1666 1667 /* 1668 * Completion function for ATA_PORT_T_ATAPI I/O 1669 * 1670 * Sense data is returned in the rfis. 1671 */ 1672 static 1673 void 1674 ahci_atapi_complete_cmd(struct ata_xfer *xa) 1675 { 1676 union ccb *ccb = xa->atascsi_private; 1677 struct ccb_hdr *ccbh = &ccb->ccb_h; 1678 struct ahci_port *ap = ccb->ccb_h.sim_priv.entries[0].ptr; 1679 scsi_cdb_t cdb; 1680 1681 cdb = (void *)((ccb->ccb_h.flags & CAM_CDB_POINTER) ? 1682 ccb->csio.cdb_io.cdb_ptr : ccb->csio.cdb_io.cdb_bytes); 1683 1684 switch(xa->state) { 1685 case ATA_S_COMPLETE: 1686 ccbh->status = CAM_REQ_CMP; 1687 ccb->csio.scsi_status = SCSI_STATUS_OK; 1688 break; 1689 case ATA_S_ERROR: 1690 ccbh->status = CAM_SCSI_STATUS_ERROR; 1691 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1692 ahci_ata_atapi_sense(&xa->rfis, &ccb->csio.sense_data); 1693 break; 1694 case ATA_S_TIMEOUT: 1695 kprintf("%s: cmd %d: timeout\n", 1696 PORTNAME(ap), cdb->generic.opcode); 1697 ccbh->status = CAM_CMD_TIMEOUT; 1698 ccb->csio.scsi_status = SCSI_STATUS_CHECK_COND; 1699 ahci_ata_dummy_sense(&ccb->csio.sense_data); 1700 break; 1701 default: 1702 kprintf("%s: cmd %d: unknown state %d\n", 1703 PORTNAME(ap), cdb->generic.opcode, xa->state); 1704 ccbh->status = CAM_REQ_CMP_ERR; 1705 break; 1706 } 1707 ccb->csio.resid = xa->resid; 1708 ahci_ata_put_xfer(xa); 1709 ahci_os_unlock_port(ap); 1710 xpt_done(ccb); 1711 ahci_os_lock_port(ap); 1712 } 1713 1714 /* 1715 * Construct dummy sense data for errors on DISKs 1716 */ 1717 static 1718 void 1719 ahci_ata_dummy_sense(struct scsi_sense_data *sense_data) 1720 { 1721 sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR; 1722 sense_data->segment = 0; 1723 sense_data->flags = SSD_KEY_MEDIUM_ERROR; 1724 sense_data->info[0] = 0; 1725 sense_data->info[1] = 0; 1726 sense_data->info[2] = 0; 1727 sense_data->info[3] = 0; 1728 sense_data->extra_len = 0; 1729 } 1730 1731 /* 1732 * Construct atapi sense data for errors on ATAPI 1733 * 1734 * The ATAPI sense data is stored in the passed rfis and must be converted 1735 * to SCSI sense data. 1736 */ 1737 static 1738 void 1739 ahci_ata_atapi_sense(struct ata_fis_d2h *rfis, 1740 struct scsi_sense_data *sense_data) 1741 { 1742 sense_data->error_code = SSD_ERRCODE_VALID | SSD_CURRENT_ERROR; 1743 sense_data->segment = 0; 1744 sense_data->flags = (rfis->error & 0xF0) >> 4; 1745 if (rfis->error & 0x04) 1746 sense_data->flags |= SSD_KEY_ILLEGAL_REQUEST; 1747 if (rfis->error & 0x02) 1748 sense_data->flags |= SSD_EOM; 1749 if (rfis->error & 0x01) 1750 sense_data->flags |= SSD_ILI; 1751 sense_data->info[0] = 0; 1752 sense_data->info[1] = 0; 1753 sense_data->info[2] = 0; 1754 sense_data->info[3] = 0; 1755 sense_data->extra_len = 0; 1756 } 1757 1758 static 1759 void 1760 ahci_strip_string(const char **basep, int *lenp) 1761 { 1762 const char *base = *basep; 1763 int len = *lenp; 1764 1765 while (len && (*base == 0 || *base == ' ')) { 1766 --len; 1767 ++base; 1768 } 1769 while (len && (base[len-1] == 0 || base[len-1] == ' ')) 1770 --len; 1771 *basep = base; 1772 *lenp = len; 1773 } 1774