1# $FreeBSD: src/sys/conf/options,v 1.191.2.53 2003/06/04 17:56:58 sam Exp $ 2# 3# On the handling of kernel options 4# 5# All kernel options should be listed in LINT64, with suitable 6# descriptions. Negative options (options that make some code not 7# compile) should be commented out; LINT64 should compile as much code 8# as possible. Try to structure option-using code so that a single 9# option only switch code on, or only switch code off, to make it 10# possible to have a full compile-test. If necessary, you can include 11# "opt_lint.h" and check for COMPILING_LINT64 to get maximum code 12# coverage. 13# 14# All new options shall also be listed in either "conf/options" or 15# "platform/<platform>/conf/options". Options that affect a single 16# source-file <xxx>.[c|s] should be directed into "opt_<xxx>.h", while 17# options that affect multiple files should either go in 18# "opt_global.h" if this is a kernel-wide option (used just about 19# everywhere), or in "opt_<option-name-in-lower-case>.h" if it affect 20# only some files. Note that the effect of listing only an option 21# without a header-file-name in conf/options (and cousins) is that the 22# last convention is followed. 23# 24# This handling scheme is not yet fully implemented. 25# 26# 27# Format of this file: 28# Option name filename 29# 30# If filename is missing, the default is 31# opt_<name-of-option-in-lower-case>.h 32 33# Adaptec Array Controller driver options 34AAC_DEBUG opt_aac.h 35 36# Adaptec aic7xxx SCSI controller options 37AHC_ALLOW_MEMIO opt_aic7xxx.h # Allow PCI devices to use memory 38 # mapped I/O 39 40AHC_TMODE_ENABLE opt_aic7xxx.h # Bitmap of units to enable 41 # targetmode operations. 42 43AHC_DUMP_EEPROM opt_aic7xxx.h # Dump the contents of our 44 # configuration prom. 45 46AHC_DEBUG opt_aic7xxx.h # Compile in Aic7xxx Debugging code. 47 48AHC_DEBUG_OPTS opt_aic7xxx.h # Aic7xxx driver debugging options. 49 # See sys/dev/aic7xxx/aic7xxx.h 50 51AHC_REG_PRETTY_PRINT opt_aic7xxx.h # Print register bitfields in debug 52 # output. Adds ~15k to driver. 53 54# Adaptec aic79xx SCSI controller options 55AHD_DEBUG opt_aic79xx.h # Compile in Aic79xx Debugging code. 56 57AHD_DEBUG_OPTS opt_aic79xx.h # Aic79xx driver debugging options. 58 # See sys/dev/aic7xxx/aic79xx.h 59 60AHD_TMODE_ENABLE opt_aic79xx.h # Bitmap of units to enable 61 # targetmode operations. 62 63AHD_REG_PRETTY_PRINT opt_aic79xx.h # Print register bitfields in debug 64 # output. Adds ~15k to driver. 65 66ADW_ALLOW_MEMIO opt_adw.h # Allow PCI devices to use memory 67 # mapped I/O 68AMR_DEBUG opt_amr.h 69TWA_DEBUG opt_twa.h 70 71#options for ACPI support 72ACPI_DEBUG opt_acpi.h 73ACPI_NO_SEMAPHORES opt_acpi.h 74ACPI_ENABLE_PCI opt_acpi.h 75 76# Miscellaneous options. 77COMPILING_LINT opt_lint.h 78DDB 79DDB_TRACE 80DDB_UNATTENDED opt_ddb.h 81GDB_REMOTE_CHAT opt_ddb.h 82KTRACE 83LIBICONV 84MD_NSECT opt_md.h 85MD_ROOT opt_md.h 86MD_ROOT_SIZE opt_md.h 87MFI_DEBUG opt_mfi.h 88NSWAPDEV opt_swap.h 89NSWBUF_MIN opt_swap.h 90PPS_SYNC opt_ntp.h 91QUOTA 92SUIDDIR opt_suiddir.h 93SHMMIN opt_sysvipc.h 94SHMMNI opt_sysvipc.h 95SHMSEG opt_sysvipc.h 96SEMMAP opt_sysvipc.h 97SEMMNI opt_sysvipc.h 98SEMMNS opt_sysvipc.h 99SEMMNU opt_sysvipc.h 100SEMMSL opt_sysvipc.h 101SEMOPM opt_sysvipc.h 102SEMUME opt_sysvipc.h 103MSGMNB opt_sysvipc.h 104MSGMNI opt_sysvipc.h 105MSGSEG opt_sysvipc.h 106MSGSSZ opt_sysvipc.h 107MSGTQL opt_sysvipc.h 108UCONSOLE 109ICMP_BANDLIM 110SHOW_BUSYBUFS 111DIRECTIO opt_directio.h 112 113# POSIX kernel options 114_KPOSIX_PRIORITY_SCHEDULING opt_posix.h 115 116# Do we want the config file compiled into the kernel? 117INCLUDE_CONFIG_FILE opt_config.h 118 119# Options for static file systems. These should only be used at config 120# time, since the corresponding lkms cannot work if there are any static 121# dependencies. Unusability is enforced by hiding the defines for the 122# options in a never-included header. 123EXT2FS opt_dontuse.h 124HAMMER opt_dontuse.h 125HPFS opt_dontuse.h 126MFS opt_dontuse.h 127MSDOSFS opt_dontuse.h 128NTFS opt_dontuse.h 129NULLFS opt_dontuse.h 130PROCFS opt_dontuse.h 131PUFFS opt_dontuse.h 132SMBFS opt_dontuse.h 133TMPFS opt_dontuse.h 134UDF opt_dontuse.h 135AUTOFS opt_dontuse.h 136 137# These static filesystems has one slightly bogus static dependency in 138# sys/platform/.../i386/autoconf.c. If any of these filesystems are 139# statically compiled into the kernel, code for mounting them as root 140# filesystems will be enabled - but look below. Boot-code is purposely 141# unavailable for the LKM-based versions. 142CD9660 143FFS 144NFS 145 146# filesystems and libiconv bridge 147CD9660_ICONV opt_dontuse.h 148MSDOSFS_ICONV opt_dontuse.h 149NTFS_ICONV opt_dontuse.h 150 151# SMB/CIFS requester 152NETSMB opt_netsmb.h 153 154# If you are following the conditions in the copyright, 155# you can enable soft-updates which will speed up a lot of things 156# and make the system safer from crashes at the same time. 157# otherwise a STUB module will be compiled in. 158SOFTUPDATES opt_ffs.h 159 160# Enable fast hash lookups for large directories on UFS-based filesystems. 161UFS_DIRHASH opt_ufs.h 162 163# The above static dependencies are planned removed, with a 164# <filesystem>_ROOT option to control if it usable as root. This list 165# allows these options to be present in config files already (though 166# they won't make any difference yet). 167FFS_ROOT opt_ffs.h 168NFS_ROOT opt_nfsroot.h 169 170# Options used only in subr_param.c. 171HZ opt_param.h 172MAXFILES opt_param.h 173NBUF opt_param.h 174NMBCLUSTERS opt_param.h 175NMBUFS opt_param.h 176VM_BCACHE_SIZE_MAX opt_param.h 177VM_SWZONE_SIZE_MAX opt_param.h 178MAXUSERS 179DFLDSIZ opt_param.h 180MAXDSIZ opt_param.h 181MAXSSIZ opt_param.h 182 183# Generic SCSI options. 184CAM_MAX_HIGHPOWER opt_cam.h 185CAMDEBUG opt_cam.h 186CAM_DEBUG_DELAY opt_cam.h 187CAM_DEBUG_BUS opt_cam.h 188CAM_DEBUG_TARGET opt_cam.h 189CAM_DEBUG_LUN opt_cam.h 190CAM_DEBUG_FLAGS opt_cam.h 191SCSI_DELAY opt_scsi.h 192SCSI_NO_SENSE_STRINGS opt_scsi.h 193SCSI_NO_OP_STRINGS opt_scsi.h 194 195# iSCSI options 196ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h 197 198# Options used only in cam/scsi/scsi_cd.c 199CHANGER_MIN_BUSY_SECONDS opt_cd.h 200CHANGER_MAX_BUSY_SECONDS opt_cd.h 201 202# Options used only in cam/scsi/scsi_sa.c. 203SA_IO_TIMEOUT opt_sa.h 204SA_SPACE_TIMEOUT opt_sa.h 205SA_REWIND_TIMEOUT opt_sa.h 206SA_ERASE_TIMEOUT opt_sa.h 207SA_1FM_AT_EOD opt_sa.h 208 209# Options used only in cam/scsi/scsi_pt.c 210SCSI_PT_DEFAULT_TIMEOUT opt_pt.h 211 212# Options used only in cam/scsi/scsi_ses.c 213SES_ENABLE_PASSTHROUGH opt_ses.h 214 215# Options used in dev/sym/ (Symbios SCSI driver). 216SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits) 217 # Allows the ncr to take precedence 218 # 1 (1<<0) -> 810a, 860 219 # 2 (1<<1) -> 825a, 875, 885, 895 220 # 4 (1<<2) -> 895a, 896, 1510d 221SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885 222 # disabled:0 (default), enabled:1 223SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking 224 # disabled:0, enabled:1 (default) 225SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported 226 # default:8, range:[1..64] 227 228# Options used only in pci/ncr.c 229SCSI_NCR_DEBUG opt_ncr.h 230SCSI_NCR_MAX_SYNC opt_ncr.h 231SCSI_NCR_MAX_WIDE opt_ncr.h 232SCSI_NCR_MYADDR opt_ncr.h 233 234# Options used only in pci/isp_pci.c 235ISP_TARGET_MODE opt_isp.h 236 237# Options used in the 'nata' ATA/ATAPI driver 238ATA_STATIC_ID opt_ata.h 239 240# Net stuff. 241# altq stuff 242ALTQ opt_global.h 243ALTQ_CBQ opt_altq.h 244ALTQ_RED opt_altq.h 245ALTQ_RIO opt_altq.h 246ALTQ_HFSC opt_altq.h 247ALTQ_PRIQ opt_altq.h 248ALTQ_FAIRQ opt_altq.h 249ALTQ_NOPCC opt_altq.h 250ALTQ_DEBUG opt_altq.h 251 252ACCEPT_FILTER_DATA 253ACCEPT_FILTER_HTTP 254BOOTP opt_bootp.h 255BOOTP_COMPAT opt_bootp.h 256BOOTP_NFSROOT opt_bootp.h 257BOOTP_WIRED_TO opt_bootp.h 258CARP opt_carp.h 259MROUTING opt_mrouting.h 260PIM opt_mrouting.h 261INET opt_inet.h 262INET6 opt_inet6.h 263IPSEC opt_ipsec.h 264IPSEC_ESP opt_ipsec.h 265IPSEC_DEBUG opt_ipsec.h 266IPSEC_FILTERGIF opt_ipsec.h 267FAST_IPSEC opt_ipsec.h 268IPDIVERT 269DUMMYNET opt_ipdn.h 270DUMMYNET_DEBUG opt_ipdn.h 271IPFIREWALL opt_ipfw.h 272IPFIREWALL3 opt_ipfw.h 273IPFIREWALL_DEBUG opt_ipfw.h 274IPFIREWALL_VERBOSE opt_ipfw.h 275IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h 276IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h 277IPV6FIREWALL opt_ip6fw.h 278IPV6FIREWALL_VERBOSE opt_ip6fw.h 279IPV6FIREWALL_VERBOSE_LIMIT opt_ip6fw.h 280IPV6FIREWALL_DEFAULT_TO_ACCEPT opt_ip6fw.h 281IPSTEALTH 282LIBMCHAIN 283MPLS opt_mpls.h 284PPP_BSDCOMP opt_ppp.h 285PPP_DEFLATE opt_ppp.h 286PPP_FILTER opt_ppp.h 287TCPDEBUG 288TCP_SIGNATURE opt_inet.h 289TCP_DROP_SYNFIN opt_tcp_input.h 290ICMPPRINTFS 291 292XBONEHACK 293MBUF_STRESS_TEST opt_mbuf_stress_test.h 294 295# (New netgraph, port still in progress) 296# 297# Netgraph(4). Use option NETGRAPH7 to enable the base netgraph code. 298# Each netgraph node type can be either be compiled into the kernel 299# or loaded dynamically. To get the former, include the corresponding 300# option below. Each type has its own man page, e.g. ng_async(4). 301NETGRAPH7 302NETGRAPH7_DEBUG opt_netgraph.h 303NETGRAPH7_ASYNC opt_netgraph.h 304NETGRAPH7_ATMLLC opt_netgraph.h 305NETGRAPH7_ATM_ATMPIF opt_netgraph.h 306NETGRAPH7_BLUETOOTH opt_netgraph.h 307NETGRAPH7_BLUETOOTH_BT3C opt_netgraph.h 308NETGRAPH7_BLUETOOTH_H4 opt_netgraph.h 309NETGRAPH7_BLUETOOTH_HCI opt_netgraph.h 310NETGRAPH7_BLUETOOTH_L2CAP opt_netgraph.h 311NETGRAPH7_BLUETOOTH_SOCKET opt_netgraph.h 312NETGRAPH7_BLUETOOTH_UBT opt_netgraph.h 313NETGRAPH7_BLUETOOTH_UBTBCMFW opt_netgraph.h 314NETGRAPH7_BPF opt_netgraph.h 315NETGRAPH7_BRIDGE opt_netgraph.h 316NETGRAPH7_CAR opt_netgraph.h 317NETGRAPH7_CISCO opt_netgraph.h 318NETGRAPH7_DEFLATE opt_netgraph.h 319NETGRAPH7_DEVICE opt_netgraph.h 320NETGRAPH7_ECHO opt_netgraph.h 321NETGRAPH7_EIFACE opt_netgraph.h 322NETGRAPH7_ETF opt_netgraph.h 323NETGRAPH7_ETHER opt_netgraph.h 324NETGRAPH7_FEC opt_netgraph.h 325NETGRAPH7_FRAME_RELAY opt_netgraph.h 326NETGRAPH7_GIF opt_netgraph.h 327NETGRAPH7_GIF_DEMUX opt_netgraph.h 328NETGRAPH7_HOLE opt_netgraph.h 329NETGRAPH7_HUB opt_netgraph.h 330NETGRAPH7_IFACE opt_netgraph.h 331NETGRAPH7_IP_INPUT opt_netgraph.h 332NETGRAPH7_IPFW opt_netgraph.h 333NETGRAPH7_KSOCKET opt_netgraph.h 334NETGRAPH7_L2TP opt_netgraph.h 335NETGRAPH7_LMI opt_netgraph.h 336# MPPC compression requires proprietary files (not included) 337NETGRAPH7_MPPC_COMPRESSION opt_netgraph.h 338NETGRAPH7_MPPC_ENCRYPTION opt_netgraph.h 339NETGRAPH7_NAT opt_netgraph.h 340NETGRAPH7_NETFLOW opt_netgraph.h 341NETGRAPH7_ONE2MANY opt_netgraph.h 342NETGRAPH7_PPP opt_netgraph.h 343NETGRAPH7_PPPOE opt_netgraph.h 344NETGRAPH7_PPTPGRE opt_netgraph.h 345NETGRAPH7_PRED1 opt_netgraph.h 346NETGRAPH7_RFC1490 opt_netgraph.h 347NETGRAPH7_SOCKET opt_netgraph.h 348NETGRAPH7_SPLIT opt_netgraph.h 349NETGRAPH7_SPPP opt_netgraph.h 350NETGRAPH7_TAG opt_netgraph.h 351NETGRAPH7_TCPMSS opt_netgraph.h 352NETGRAPH7_TEE opt_netgraph.h 353NETGRAPH7_TTY opt_netgraph.h 354NETGRAPH7_UI opt_netgraph.h 355NETGRAPH7_VJC opt_netgraph.h 356 357# NgATM options 358NGATM7_ATM opt_netgraph.h 359NGATM7_ATMBASE opt_netgraph.h 360NGATM7_SSCOP opt_netgraph.h 361NGATM7_SSCFU opt_netgraph.h 362NGATM7_UNI opt_netgraph.h 363NGATM7_CCATM opt_netgraph.h 364 365# Netgraph(4). Use option NETGRAPH to enable the base netgraph code. 366# Each netgraph node type can be either be compiled into the kernel 367# or loaded dynamically. To get the former, include the corresponding 368# option below. Each type has its own man page, e.g. ng_async(8). 369NETGRAPH 370NETGRAPH_ASYNC opt_netgraph.h 371NETGRAPH_BPF opt_netgraph.h 372NETGRAPH_BRIDGE opt_netgraph.h 373NETGRAPH_CISCO opt_netgraph.h 374NETGRAPH_ECHO opt_netgraph.h 375NETGRAPH_EIFACE opt_netgraph.h 376NETGRAPH_ETHER opt_netgraph.h 377NETGRAPH_FEC opt_netgraph.h 378NETGRAPH_FRAME_RELAY opt_netgraph.h 379NETGRAPH_HOLE opt_netgraph.h 380NETGRAPH_IFACE opt_netgraph.h 381NETGRAPH_KSOCKET opt_netgraph.h 382NETGRAPH_LMI opt_netgraph.h 383NETGRAPH_L2TP opt_netgraph.h 384# MPPC compression requires proprietary files (not included) 385NETGRAPH_MPPC_COMPRESSION opt_netgraph.h 386NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h 387NETGRAPH_ONE2MANY opt_netgraph.h 388NETGRAPH_PPP opt_netgraph.h 389NETGRAPH_PPPOE opt_netgraph.h 390NETGRAPH_PPTPGRE opt_netgraph.h 391NETGRAPH_RFC1490 opt_netgraph.h 392NETGRAPH_SOCKET opt_netgraph.h 393NETGRAPH_TEE opt_netgraph.h 394NETGRAPH_TTY opt_netgraph.h 395NETGRAPH_UI opt_netgraph.h 396NETGRAPH_VJC opt_netgraph.h 397 398# AGP options 399AGP_DEBUG opt_agp.h 400 401# DRM options 402DRM_DEBUG opt_drm.h 403DRM_LINUX opt_drm.h 404 405# DPT driver debug flags 406DPT_MEASURE_PERFORMANCE opt_dpt.h 407DPT_HANDLE_TIMEOUTS opt_dpt.h 408DPT_TIMEOUT_FACTOR opt_dpt.h 409DPT_LOST_IRQ opt_dpt.h 410DPT_RESET_HBA opt_dpt.h 411 412# Misc debug flags. Most of these should probably be replaced with 413# 'DEBUG', and then let people recompile just the interesting modules 414# with 'make CC="cc -DDEBUG"'. 415CLUSTERDEBUG opt_debug_cluster.h 416DEBUG_1284 opt_ppb_1284.h 417VP0_DEBUG opt_vpo.h 418LPT_DEBUG opt_lpt.h 419PLIP_DEBUG opt_plip.h 420LOCKF_DEBUG opt_debug_lockf.h 421SI_DEBUG opt_debug_si.h 422 423# Fb options 424FB_DEBUG opt_fb.h 425FB_INSTALL_CDEV opt_fb.h 426 427# ppbus related options 428PERIPH_1284 opt_ppb_1284.h 429DONTPROBE_1284 opt_ppb_1284.h 430 431# smbus related options 432ENABLE_ALART opt_intpm.h 433 434# These cause changes all over the kernel 435NO_LWKT_SPLIT_USERPRI opt_global.h 436BLKDEV_IOSIZE opt_global.h 437DEBUG opt_global.h 438DEBUG_LOCKS opt_global.h 439DEBUG_LOCKS_LATENCY opt_global.h 440DEBUG_CRIT_SECTIONS opt_global.h 441DIAGNOSTIC opt_global.h 442INVARIANTS opt_global.h 443VFS_BIO_DEBUG opt_global.h 444SOCKBUF_DEBUG opt_global.h 445PANIC_DEBUG opt_global.h 446MBUF_DEBUG opt_global.h 447PMAP_DEBUG opt_global.h 448VM_PAGE_DEBUG opt_global.h 449SLAB_DEBUG opt_global.h 450 451# Sample system/interrupt PC 452DEBUG_PCTRACK opt_pctrack.h 453 454# These are VM related options 455NO_SWAPPING opt_vm.h 456 457# sys/netkey 458KEY 459 460# Size of the kernel message buffer 461MSGBUF_SIZE opt_msgbuf.h 462 463# NFS options 464NFS_MINATTRTIMO opt_nfs.h 465NFS_MAXATTRTIMO opt_nfs.h 466NFS_MINDIRATTRTIMO opt_nfs.h 467NFS_MAXDIRATTRTIMO opt_nfs.h 468NFS_GATHERDELAY opt_nfs.h 469NFS_UIDHASHSIZ opt_nfs.h 470NFS_WDELAYHASHSIZ opt_nfs.h 471NFS_MUIDHASHSIZ opt_nfs.h 472NFS_NOSERVER opt_nfs.h 473NFS_DEBUG opt_nfs.h 474 475# MSDOSFS options 476MSDOSFS_DEBUG opt_msdosfs.h 477 478# For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver 479BROOKTREE_SYSTEM_DEFAULT opt_bktr.h 480BROOKTREE_ALLOC_PAGES opt_bktr.h 481BKTR_OVERRIDE_CARD opt_bktr.h 482BKTR_OVERRIDE_TUNER opt_bktr.h 483BKTR_OVERRIDE_DBX opt_bktr.h 484BKTR_OVERRIDE_MSP opt_bktr.h 485BKTR_SYSTEM_DEFAULT opt_bktr.h 486BKTR_ALLOC_PAGES opt_bktr.h 487BKTR_USE_PLL opt_bktr.h 488BKTR_GPIO_ACCESS opt_bktr.h 489BKTR_NO_MSP_RESET opt_bktr.h 490BKTR_430_FX_MODE opt_bktr.h 491BKTR_SIS_VIA_MODE opt_bktr.h 492BKTR_NEW_MSP34XX_DRIVER opt_bktr.h 493 494# Various mi ISA bus flags 495COM_ESP opt_sio.h 496COM_MULTIPORT opt_sio.h 497BREAK_TO_DEBUGGER opt_comconsole.h 498ALT_BREAK_TO_DEBUGGER opt_comconsole.h 499 500# options for bus/device framework 501BUS_DEBUG opt_bus.h 502 503# options for USB support 504OHCI_DEBUG opt_usb.h 505USB_DEBUG opt_usb.h 506 507# options for the Realtek RTL8188*U/RTL8192CU driver (urtwn) 508URTWN_WITHOUT_UCODE opt_urtwn.h 509 510# Vinum options 511VINUMDEBUG opt_vinum.h 512 513# Embedded system options 514UKBD_DFLT_KEYMAP opt_ukbd.h 515INIT_PATH opt_init_path.h 516 517ROOTDEVNAME opt_rootdevname.h 518 519FDC_DEBUG opt_fdc.h 520PCFCLOCK_VERBOSE opt_pcfclock.h 521PCFCLOCK_MAX_RETRIES opt_pcfclock.h 522 523# Network device queue based polling 524IFPOLL_ENABLE opt_ifpoll.h 525 526# options for ubsec driver 527UBSEC_DEBUG opt_ubsec.h 528UBSEC_RNDTEST opt_ubsec.h 529UBSEC_NO_RNG opt_ubsec.h 530 531# options for hifn driver 532HIFN_DEBUG opt_hifn.h 533HIFN_RNDTEST opt_hifn.h 534HIFN_NO_RNG opt_hifn.h 535 536# options for safenet driver 537SAFE_DEBUG opt_safe.h 538SAFE_NO_RNG opt_safe.h 539SAFE_RNDTEST opt_safe.h 540 541# KTR options 542KTR opt_global.h 543KTR_ENTRIES opt_global.h 544KTR_ALL opt_ktr.h 545KTR_ACPI_EC opt_ktr.h 546KTR_CTXSW opt_ktr.h 547KTR_DMCRYPT opt_ktr.h 548KTR_ETHERNET opt_ktr.h 549KTR_HAMMER opt_ktr.h 550KTR_IFQ opt_ktr.h 551KTR_IF_BGE opt_ktr.h 552KTR_IF_EM opt_ktr.h 553KTR_IF_EMX opt_ktr.h 554KTR_IF_START opt_ktr.h 555KTR_IPIQ opt_ktr.h 556KTR_KERNENTRY opt_ktr.h 557KTR_MEMORY opt_ktr.h 558KTR_SERIALIZER opt_ktr.h 559KTR_SPIN_CONTENTION opt_ktr.h 560KTR_TESTLOG opt_ktr.h 561KTR_TOKENS opt_ktr.h 562KTR_TSLEEP opt_ktr.h 563KTR_USCHED_BSD4 opt_ktr.h 564KTR_USCHED_DFLY opt_ktr.h 565KTR_VERBOSE opt_ktr.h 566KTR_IF_POLL opt_ktr.h 567KTR_UDP opt_ktr.h 568KTR_SOWAKEUP opt_ktr.h 569 570# NTFS options 571NTFS_DEBUG opt_ntfs.h 572 573# options for the Atheros driver 574ATH_DEBUG opt_ath.h 575#ATH_DEBUG_ALQ opt_ath.h 576ATH_DIAGAPI opt_ath.h 577#ATH_EEPROM_FIRMWARE opt_ath.h 578#ATH_ENABLE_11N opt_ath.h 579ATH_ENABLE_DFS opt_ath.h 580#ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h 581ATH_KTR_INTR_DEBUG opt_ath.h 582#ATH_TX99_DIAG opt_ath.h 583 584# ...and its HAL 585AH_AR5416_INTERRUPT_MITIGATION opt_ah.h 586AH_ASSERT opt_ah.h 587AH_DEBUG opt_ah.h 588#AH_DEBUG_ALQ opt_ah.h 589#AH_DEBUG_COUNTRY opt_ah.h 590AH_INTERRUPT_DEBUGGING opt_ah.h 591AH_MAXCHAN opt_ah.h 592AH_NEED_DESC_SWAP opt_ah.h 593AH_PRIVATE_DIAG opt_ah.h 594AH_RXCFG_SDMAMW_4BYTES opt_ah.h 595AH_SUPPORT_AR5416 opt_ah.h 596AH_SUPPORT_AR9130 opt_ah.h 597AH_SUPPORT_AR9330 opt_ah.h 598AH_SUPPORT_AR9340 opt_ah.h 599AH_USE_INIPDGAIN opt_ah.h 600#AH_WRITE_EEPROM opt_ah.h 601#AH_WRITE_REGDOMAIN opt_ah.h 602 603# bce driver 604BCE_RSS_DEBUG opt_bce.h 605BCE_TSS_DEBUG opt_bce.h 606 607# bnx driver 608BNX_RSS_DEBUG opt_bnx.h 609BNX_TSO_DEBUG opt_bnx.h 610BNX_TSS_DEBUG opt_bnx.h 611 612# bwn driver 613BWN_DEBUG opt_bwn.h 614BWN_RXRING_SLOTS opt_bwn.h 615BWN_TXRING_SLOTS opt_bwn.h 616 617# siba_bwn driver 618SIBA_DEBUG opt_siba.h 619 620# emx driver 621EMX_RSS_DEBUG opt_emx.h 622EMX_TSO_DEBUG opt_emx.h 623EMX_TSS_DEBUG opt_emx.h 624 625# jme driver 626JME_RSS_DEBUG opt_jme.h 627 628# igb driver 629IGB_RSS_DEBUG opt_igb.h 630IGB_TSS_DEBUG opt_igb.h 631IGB_MSIX_DEBUG opt_igb.h 632 633# ix driver 634IX_RSS_DEBUG opt_ix.h 635 636# Options for the Intel 802.11ac wireless driver 637IWM_DEBUG opt_iwm.h 638 639# Options for the Intel 802.11n wireless driver 640IWN_DEBUG opt_iwn.h 641 642# Options for the Intel 3945ABG wireless driver 643WPI_DEBUG opt_wpi.h 644 645# dcons options 646DCONS_BUF_SIZE opt_dcons.h 647DCONS_POLL_HZ opt_dcons.h 648DCONS_FORCE_CONSOLE opt_dcons.h 649DCONS_FORCE_GDB opt_dcons.h 650 651# deprecated drivers and options 652I_WANT_DEPRECATED_STUFF opt_deprecated.h 653 654# Receive Side Scaling (now basecode) 655RSS_DEBUG opt_rss.h 656 657# Panic settings 658WDOG_DISABLE_ON_PANIC opt_panic.h 659ERROR_LED_ON_PANIC opt_panic.h 660 661# 802.11 support layer 662IEEE80211_DEBUG opt_wlan.h 663IEEE80211_DEBUG_REFCNT opt_wlan.h 664IEEE80211_SUPPORT_MESH opt_wlan.h 665IEEE80211_SUPPORT_SUPERG opt_wlan.h 666IEEE80211_SUPPORT_TDMA opt_wlan.h 667 668# 802.11 TDMA support 669TDMA_SLOTLEN_DEFAULT opt_tdma.h 670TDMA_SLOTCNT_DEFAULT opt_tdma.h 671TDMA_BINTVAL_DEFAULT opt_tdma.h 672TDMA_TXRATE_11B_DEFAULT opt_tdma.h 673TDMA_TXRATE_11G_DEFAULT opt_tdma.h 674TDMA_TXRATE_11A_DEFAULT opt_tdma.h 675TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h 676TDMA_TXRATE_HALF_DEFAULT opt_tdma.h 677TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h 678TDMA_TXRATE_11NA_DEFAULT opt_tdma.h 679TDMA_TXRATE_11NG_DEFAULT opt_tdma.h 680 681# Sound options 682SND_DEBUG opt_snd.h 683SND_DIAGNOSTIC opt_snd.h 684SND_FEEDER_MULTIFORMAT opt_snd.h 685SND_FEEDER_FULL_MULTIFORMAT opt_snd.h 686SND_FEEDER_RATE_HP opt_snd.h 687SND_PCM_64 opt_snd.h 688SND_OLDSTEREO opt_snd.h 689 690PANIC_REBOOT_WAIT_TIME opt_panic.h 691 692# Obsolete options (will be removed in the future) 693# 694SYSVMSG opt_dontuse.h 695SYSVSEM opt_dontuse.h 696SYSVSHM opt_dontuse.h 697P1003_1B opt_dontuse.h 698_KPOSIX_VERSION opt_dontuse.h 699DSCHED_FQ opt_dontuse.h 700