1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17# $DragonFly: src/etc/defaults/rc.conf,v 1.12 2004/07/14 18:54:29 hmp Exp $ 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23rc_debug="NO" # Set to YES to enable debugging output from rc.d 24rc_info="YES" # Enables display of informational messages at boot. 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 28apmd_enable="NO" # Run apmd to handle APM event from userland. 29apmd_flags="" # Flags to apmd (if enabled). 30devd_enable="NO" # Run devd, to trigger programs on device tree changes. 31kldxref_enable="NO" # Build linker.hints files with kldxref(8). 32kldxref_clobber="NO" # Overwrite old linker.hints at boot. 33kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 34pccard_enable="NO" # Set to YES if you want to configure PCCARD devices. 35pccard_mem="DEFAULT" # If pccard_enable=YES, this is card memory address. 36pccard_beep="2" # pccard beep type. 37pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 38pccardd_flags="-z" # Additional flags for pccardd. 39pccard_conf="/etc/defaults/pccard.conf" # pccardd(8) config file 40pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 41removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 42local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 43script_name_sep=" " # Change if your startup scripts' names contain spaces 44rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 45fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 46netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 47extra_netfs_types="NO" # List of network extra filesystem types for delayed 48 # mount at startup (or NO). 49 50############################################################## 51### Network configuration sub-section ###################### 52############################################################## 53 54### Basic network and firewall/security options: ### 55hostname="" # Set this! 56nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 57dhclient_program="/sbin/dhclient" # Path to dhcp client program. 58dhclient_flags="" # Additional flags to pass to dhcp client. 59firewall_enable="NO" # Set to YES to enable firewall functionality 60firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 61firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 62firewall_quiet="NO" # Set to YES to suppress rule display 63firewall_logging="NO" # Set to YES to enable events logging 64firewall_flags="" # Flags passed to ipfw when type is a file 65ip_portrange_first="NO" # Set first dynamically allocated port 66ip_portrange_last="NO" # Set last dynamically allocated port 67ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 68ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 69natd_program="/sbin/natd" # path to natd, if you want a different one. 70natd_enable="NO" # Enable natd (if firewall_enable == YES). 71natd_interface="" # Public interface or IPaddress to use. 72natd_flags="" # Additional flags for natd. 73ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 74ipfilter_program="/sbin/ipf" # where the ipfilter program lives 75ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 76 # /usr/src/contrib/ipfilter/rules for examples 77ipfilter_flags="" # additional flags for ipfilter 78ipnat_enable="NO" # Set to YES to enable ipnat functionality 79ipnat_program="/sbin/ipnat" # where the ipnat program lives 80ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 81ipnat_flags="" # additional flags for ipnat 82ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 83ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 84ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 85ipfs_enable="NO" # Set to YES to enable saving and restoring 86 # of state tables at shutdown and boot 87ipfs_program="/sbin/ipfs" # where the ipfs program lives 88ipfs_flags="" # additional flags for ipfs 89tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 90log_in_vain="0" # >=1 to log connects to ports w/o listeners. 91tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 92# For the following option you need to have TCP_DROP_SYNFIN set in your 93# kernel. Please refer to LINT and NOTES for details. 94tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 95 # NOTE: this violates the TCP specification 96icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 97icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 98network_interfaces="auto" # List of network interfaces (or "auto"). 99cloned_interfaces="" # List of cloned network interfaces to create. 100#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 101ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 102#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 103#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 104# 105# If you have any sppp(4) interfaces above, you might also want to set 106# the following parameters. Refer to spppcontrol(8) for their meaning. 107sppp_interfaces="" # List of sppp interfaces. 108#sppp_interfaces="isp0" # example: sppp over ISDN 109#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 110gif_interfaces="NO" # List of GIF tunnels (or "NO"). 111#gif_interfaces="gif0 gif1" # Examples typically for a router. 112 # Choose correct tunnel addrs. 113#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 114#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 115 116# User ppp configuration. 117ppp_enable="NO" # Start user-ppp (or NO). 118ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 119 # For details see man page for ppp(8). Default is auto. 120ppp_nat="YES" # Use PPP's internal network address translation or NO. 121ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 122ppp_user="root" # Which user to run ppp as 123 124### Network daemon (miscellaneous) ### 125syslogd_enable="YES" # Run syslog daemon (or NO). 126syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 127syslogd_flags="-s" # Flags to syslogd (if enabled). 128#syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 129inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 130inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 131inetd_flags="-wW" # Optional flags to inetd 132# 133# named. It may be possible to run named in a sandbox, man security for 134# details. Note: when named_chrootdir is specified, RCNG automatically 135# adds '-u bind'. 136# 137named_enable="NO" # Run named, the DNS server (or NO). 138named_program="/usr/sbin/named" # path to named, if you want a different one. 139named_pidfile="/var/run/named.pid" # Pid file 140named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it) 141 142# 143# kerberos. Do not run the admin daemons on slave servers 144# 145kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 146kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 147kadmind5_server_enable="NO" # Run kadmind (or NO) 148kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 149kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 150kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 151 152rwhod_enable="NO" # Run the rwho daemon (or NO). 153rwhod_flags="" # Flags for rwhod 154rarpd_enable="NO" # Run rarpd (or NO). 155rarpd_flags="" # Flags to rarpd. 156bootparamd_enable="NO" # Run bootparamd (or NO). 157bootparamd_flags="" # Flags to bootparamd 158pppoed_enable="NO" # Run the PPP over Ethernet daemon. 159pppoed_provider="*" # Provider and ppp(8) config file entry. 160pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 161pppoed_interface="fxp0" # The interface that pppoed runs on. 162sshd_enable="NO" # Enable sshd 163sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 164sshd_flags="" # Additional flags for sshd. 165 166### Network File System (NFS): ### 167### Server-side options also need rpcbind_enable="YES" ### 168amd_enable="NO" # Run amd service with $amd_flags (or NO). 169amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 170amd_map_program="NO" # Can be set to "ypcat -k amd.master" 171nfs_client_enable="NO" # This host is an NFS client (or NO). 172nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 173nfs_access_cache="2" # Client cache timeout in seconds 174nfs_server_enable="NO" # This host is an NFS server (or NO). 175nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 176mountd_enable="NO" # Run mountd (or NO). 177mountd_flags="-r" # Flags to mountd (if NFS server enabled). 178weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 179nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 180nfs_bufpackets="" # bufspace (in packets) for client 181rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 182rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 183rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 184rpcbind_enable="NO" # Run the portmapper service (YES/NO). 185# this is rpcbind in 5.x 186rpcbind_program="/usr/sbin/portmap" # path to rpcbind, if you want a different one. 187rpcbind_flags="" # Flags to rpcbind (if enabled). 188rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 189keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 190keyserv_flags="" # Flags to keyserv (if enabled). 191 192### Network Time Services options: ### 193timed_enable="NO" # Run the time daemon (or NO). 194timed_flags="" # Flags to timed (if enabled). 195ntpdate_enable="NO" # Run ntpdate to sync time on boot (or NO). 196ntpdate_program="/usr/sbin/ntpdate" # path to ntpdate, if you want a different one. 197ntpdate_flags="-b" # Flags to ntpdate (if enabled). 198ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 199ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 200ntpd_flags="-p /var/run/ntpd.pid" # Flags to ntpd (if enabled). 201 202# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 203nis_client_enable="NO" # We're an NIS client (or NO). 204nis_client_flags="" # Flags to ypbind (if enabled). 205nis_ypset_enable="NO" # Run ypset at boot time (or NO). 206nis_ypset_flags="" # Flags to ypset (if enabled). 207nis_server_enable="NO" # We're an NIS server (or NO). 208nis_server_flags="" # Flags to ypserv (if enabled). 209nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 210nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 211nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 212nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 213 214### Network routing options: ### 215defaultrouter="NO" # Set to default gateway (or NO). 216static_routes="" # Set to static route list (or leave empty). 217gateway_enable="NO" # Set to YES if this host will be a gateway. 218router_enable="NO" # Set to YES to enable a routing daemon. 219router="/sbin/routed" # Name of routing daemon to use if enabled. 220router_flags="-q" # Flags for routing daemon. 221mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 222mrouted_flags="" # Flags for multicast routing daemon. 223ipxgateway_enable="NO" # Set to YES to enable IPX routing. 224ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 225ipxrouted_flags="" # Flags for IPX routing daemon. 226arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 227forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 228accept_sourceroute="NO" # accept source routed packets to us 229 230### ATM interface options: ### 231atm_enable="NO" # Configure ATM interfaces (or NO). 232#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 233#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 234#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 235#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 236#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 237#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 238atm_pvcs="" # Set to PVC list (or leave empty). 239atm_arps="" # Set to permanent ARP list (or leave empty). 240 241### ISDN interface options: (see also: /usr/share/examples/isdn) ### 242isdn_enable="NO" # Enable the ISDN subsystem (or NO). 243isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 244isdn_flags="-dn -d0x1f9" # Flags for isdnd 245isdn_ttype="cons25" # terminal type for fullscreen mode 246isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 247isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 248isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 249 250### Miscellaneous network options: ### 251icmp_bmcastecho="NO" # respond to broadcast ping packets 252 253### IPv6 options: ### 254ipv6_enable="NO" # Set to YES to set up for IPv6. 255ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 256ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 257#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 258ipv6_static_routes="" # Set to static route list (or leave empty). 259#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 260 # route toward loopback interface. 261#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 262ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 263ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 264ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 265ipv6_router_flags="" # Flags to IPv6 routing daemon. 266#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 267 # addrs. 268#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 269 # node, you should stop advertisement. 270#ipv6_network_interfaces="ed0 ep0" # Examples for router 271 # or static configuration for end node. 272 # Choose correct prefix value. 273#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 274#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 275#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 276#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 277ipv6_default_interface="NO" # Default output interface for scoped addrs. 278 # Now this works only for IPv6 link local 279 # multicast addrs. 280rtadvd_enable="NO" # Set to YES to enable an IPv6 router 281 # advertisement daemon. If set to YES, 282 # this router becomes a possible candidate 283 # IPv6 default router for local subnets. 284rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 285mroute6d_enable="NO" # Do IPv6 multicast routing. 286mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 287 # routing daemon. You need to 288 # install it from package or 289 # port. 290mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 291stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 292 # tunneling interface. Specify this entry 293 # to enable 6to4 interface. 294stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 295 # to limit peer addr range. Effective value 296 # is 0-31. 297stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 298 # If you like, you can set "AUTO" for this. 299stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 300ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 301 # IPv6-to-IPv4 TCP translator. You also need 302 # faithd(8) setup. 303ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 304 # communication. (like ::ffff:a.b.c.d) 305ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 306 # functionality 307ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 308ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 309ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 310ipv6_firewall_logging="NO" # Set to YES to enable events logging 311ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 312ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 313 # see /usr/src/contrib/ipfilter/rules 314 # for examples 315 316############################################################## 317### System console options ################################# 318############################################################## 319 320keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 321keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 322keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 323keychange="NO" # function keys default values (or NO). 324cursor="NO" # cursor type {normal|blink|destructive} (or NO). 325scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 326font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 327font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 328font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 329blanktime="300" # blank time (in seconds) or "NO" to turn it off. 330saver="NO" # screen saver: Uses /boot/kernel/${saver}_saver.ko 331moused_enable="NO" # Run the mouse daemon. 332moused_type="auto" # See man page for rc.conf(5) for available settings. 333moused_port="/dev/psm0" # Set to your mouse port. 334moused_flags="" # Any additional flags to moused. 335mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 336 # language code table, specify alternative range 337 # start like mousechar_start=3, see vidcontrol(1) 338allscreens_flags="" # Set this vidcontrol mode for all virtual screens 339allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 340 341 342############################################################## 343### pcvt console driver options ############################ 344############################################################## 345 346pcvt_verbose="NO" # set to YES to enable verbose configuration messages 347pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 348pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 349pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 350pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 351pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 352pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 353pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 354pcvt_blanktime="NO" # blank time (in seconds) (or NO). 355pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 356pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 357pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 358 359 360############################################################## 361### Mail Transfer Agent (MTA) options ###################### 362############################################################## 363 364mta_start_script="/etc/rc.sendmail" 365 # Script to start your chosen MTA, called by /etc/rc. 366# Settings for /etc/rc.sendmail: 367sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 368sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 369sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 370sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 371 # Flags for localhost-only MTA 372sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 373sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 374sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 375sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 376 # Flags for sendmail_msp_queue daemon. 377 378 379############################################################## 380### Miscellaneous administrative options ################### 381############################################################## 382 383mixer_enable="NO" # Manage mixer settings across reboots 384cron_enable="YES" # Run the periodic job daemon. 385cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 386cron_flags="" # Which options to pass to the cron daemon. 387lpd_enable="NO" # Run the line printer daemon. 388lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 389lpd_flags="" # Flags to lpd (if enabled). 390usbd_enable="NO" # Run the usbd daemon. 391usbd_flags="" # Flags to usbd (if enabled). 392dumpdev="NO" # Device name to crashdump to (or NO). 393dumpdir="/var/crash" # Directory where crash dumps are to be stored 394savecore_flags="" # Used if dumpdev is enabled above, and present. 395enable_quotas="NO" # turn on quotas on startup (or NO). 396check_quotas="YES" # Check quotas on startup (or NO). 397accounting_enable="NO" # Turn on process accounting (or NO). 398ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 399ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 400sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 401linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 402svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 403osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 404clear_tmp_enable="NO" # Clear /tmp at startup. 405ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 406ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 407 # shared library search paths 408ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 409 # a.out shared library search paths 410kern_securelevel_enable="NO" # kernel security level (see init(8)), 411kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 412lomac_enable="NO" # start lomac(4) security module at boot 413update_motd="YES" # update version info in /etc/motd (or NO) 414start_vinum="NO" # set to YES to start vinum 415unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 416rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 417dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 418jail_enable="NO" # Set to NO to disable starting of any jails 419jail_list="" # Space separated list of names of jails 420jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 421jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 422jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 423resident_enable="NO" # Proccess /etc/resident.conf 424varsym_enable="NO" # Proccess /etc/varsym.conf 425watchdogd_enable="NO" # Start the software watchdog daemon 426 427############################################################## 428### Define source_rc_confs, the mechanism used by /etc/rc.* ## 429### scripts to source rc_conf_files overrides safely. ## 430############################################################## 431 432if [ -z "${source_rc_confs_defined}" ]; then 433 source_rc_confs_defined=yes 434 source_rc_confs () { 435 local i sourced_files 436 for i in ${rc_conf_files}; do 437 case ${sourced_files} in 438 *:$i:*) 439 ;; 440 *) 441 sourced_files="${sourced_files}:$i:" 442 if [ -r $i ]; then 443 . $i 444 fi 445 ;; 446 esac 447 done 448 } 449fi 450