1#!/bin/sh 2# 3 4# This is rc.conf - a file full of useful variables that you can set 5# to change the default startup behavior of your system. You should 6# not edit this file! Put any overrides into one of the ${rc_conf_files} 7# instead and you will be able to update these defaults later without 8# spamming your local configuration information. 9# 10# The ${rc_conf_files} files should only contain values which override 11# values set in this file. This eases the upgrade path when defaults 12# are changed and new features are added. 13# 14# All arguments must be in double or single quotes. 15# 16# $FreeBSD: src/etc/defaults/rc.conf,v 1.180 2003/06/26 09:50:50 smkelly Exp $ 17# $DragonFly: src/etc/defaults/rc.conf,v 1.23 2005/04/15 18:40:52 joerg Exp $ 18 19############################################################## 20### Important initial Boot-time options #################### 21############################################################## 22 23rc_debug="NO" # Set to YES to enable debugging output from rc.d 24rc_info="YES" # Enables display of informational messages at boot. 25rcshutdown_timeout="30" # Seconds to wait before terminating rc.shutdown 26swapfile="NO" # Set to name of swapfile if aux swapfile desired. 27apm_enable="NO" # Set to YES to enable APM BIOS functions (or NO). 28apmd_enable="NO" # Run apmd to handle APM event from userland. 29apmd_flags="" # Flags to apmd (if enabled). 30battd_enable="NO" # Set to YES to have battd alert on 10% battery power remaining. 31battd_flags="" # Flags to battd (if enabled). 32devd_enable="NO" # Run devd, to trigger programs on device tree changes. 33kldxref_enable="NO" # Build linker.hints files with kldxref(8). 34kldxref_clobber="NO" # Overwrite old linker.hints at boot. 35kldxref_module_path="" # Override kern.module_path. A ';'-delimited list. 36pccard_ifconfig="NO" # Specialized pccard ethernet configuration (or NO). 37pccard_ether_delay="5" # Delay before trying to start dhclient in pccard_ether 38removable_interfaces="" # Removable network interfaces for /etc/pccard_ether. 39local_startup="/usr/local/etc/rc.d /usr/X11R6/etc/rc.d" # startup script dirs. 40script_name_sep=" " # Change if your startup scripts' names contain spaces 41rc_conf_files="/etc/rc.conf /etc/rc.conf.local" 42fsck_y_enable="NO" # Set to YES to do fsck -y if the initial preen fails. 43netfs_types="nfs:NFS smbfs:SMB portalfs:PORTAL nwfs:NWFS" # Net filesystems. 44extra_netfs_types="NO" # List of network extra filesystem types for delayed 45 # mount at startup (or NO). 46 47############################################################## 48### Network configuration sub-section ###################### 49############################################################## 50 51### Basic network and firewall/security options: ### 52# 53# see 'man firewall' for an explanation of the default firewall rules 54# 55hostname="" # Set this! 56nisdomainname="NO" # Set to NIS domain if using NIS (or NO). 57dhclient_program="/sbin/dhclient" # Path to dhcp client program. 58dhclient_flags="" # Additional flags to pass to dhcp client. 59dhcpd_enable="NO" # Set to YES to enable the DHCP server 60dhcrelay_enable="NO" # Set to YES to enable the DHCP relay server 61firewall_enable="NO" # Set to YES to enable firewall functionality 62firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall 63firewall_type="UNKNOWN" # Firewall type (see /etc/rc.firewall) 64firewall_trusted_nets="192.168.0.0/16" # list of trusted nets 65firewall_trusted_interfaces="" # list of trusted interfaces e.g. "rl0 xl0" 66firewall_allowed_icmp_types="0 3 8 11 12 13 14" 67firewall_open_tcp_ports="22 25 53 80 113 443" 68firewall_open_udp_ports="53" 69firewall_quiet="NO" # Set to YES to suppress rule display 70firewall_logging="NO" # Set to YES to enable events logging 71firewall_flags="" # Flags passed to ipfw when type is a file 72ip_portrange_first="NO" # Set first dynamically allocated port 73ip_portrange_last="NO" # Set last dynamically allocated port 74ipsec_enable="NO" # Set to YES to run setkey on ipsec_file 75ipsec_file="/etc/ipsec.conf" # Name of config file for setkey 76natd_program="/sbin/natd" # path to natd, if you want a different one. 77natd_enable="NO" # Enable natd (if firewall_enable == YES). 78natd_interface="" # Public interface or IPaddress to use. 79natd_flags="" # Additional flags for natd. 80ipfilter_enable="NO" # Set to YES to enable ipfilter functionality 81ipfilter_program="/sbin/ipf" # where the ipfilter program lives 82ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see 83 # /usr/src/contrib/ipfilter/rules for examples 84ipfilter_flags="" # additional flags for ipfilter 85ipnat_enable="NO" # Set to YES to enable ipnat functionality 86ipnat_program="/sbin/ipnat" # where the ipnat program lives 87ipnat_rules="/etc/ipnat.rules" # rules definition file for ipnat 88ipnat_flags="" # additional flags for ipnat 89ipmon_enable="NO" # Set to YES for ipmon; needs ipfilter or ipnat 90ipmon_program="/sbin/ipmon" # where the ipfilter monitor program lives 91ipmon_flags="-Ds" # typically "-Ds" or "-D /var/log/ipflog" 92ipfs_enable="NO" # Set to YES to enable saving and restoring 93 # of state tables at shutdown and boot 94ipfs_program="/sbin/ipfs" # where the ipfs program lives 95ipfs_flags="" # additional flags for ipfs 96pf_enable="NO" # Set to YES to enable packet filter (pf) 97pf_rules="/etc/pf.conf" # rules definition file for pf 98pf_program="/usr/sbin/pfctl" # where the pfctl program lives 99pf_flags="" # additional flags for pfctl 100pflog_enable="NO" # Set to YES to enable packet filter logging 101pflog_logfile="/var/log/pflog" # where pflogd shoule store the logfile 102pflog_program="/usr/sbin/pflogd" # where the pflogd program lives 103pflog_flags="" # additional flags for pflogd 104tcp_extensions="YES" # Set to NO to turn off RFC1323 extensions. 105log_in_vain="0" # >=1 to log connects to ports w/o listeners. 106tcp_keepalive="YES" # Enable stale TCP connection timeout (or NO). 107# For the following option you need to have TCP_DROP_SYNFIN set in your 108# kernel. Please refer to LINT and NOTES for details. 109tcp_drop_synfin="NO" # Set to YES to drop TCP packets with SYN+FIN 110 # NOTE: this violates the TCP specification 111icmp_drop_redirect="NO" # Set to YES to ignore ICMP REDIRECT packets 112icmp_log_redirect="NO" # Set to YES to log ICMP REDIRECT packets 113network_interfaces="auto" # List of network interfaces (or "auto"). 114cloned_interfaces="" # List of cloned network interfaces to create. 115#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config. 116ifconfig_lo0="inet 127.0.0.1" # default loopback device configuration. 117#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry. 118#ifconfig_ed0_ipx="ipx 0x00010010" # Sample IPX address family entry. 119# 120# If you have any sppp(4) interfaces above, you might also want to set 121# the following parameters. Refer to spppcontrol(8) for their meaning. 122sppp_interfaces="" # List of sppp interfaces. 123#sppp_interfaces="isp0" # example: sppp over ISDN 124#spppconfig_isp0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'" 125gif_interfaces="NO" # List of GIF tunnels (or "NO"). 126#gif_interfaces="gif0 gif1" # Examples typically for a router. 127 # Choose correct tunnel addrs. 128#gifconfig_gif0="10.1.1.1 10.1.2.1" # Examples typically for a router. 129#gifconfig_gif1="10.1.1.2 10.1.2.2" # Examples typically for a router. 130 131# User ppp configuration. 132ppp_enable="NO" # Start user-ppp (or NO). 133ppp_mode="auto" # Choice of "auto", "ddial", "direct" or "dedicated". 134 # For details see man page for ppp(8). Default is auto. 135ppp_nat="YES" # Use PPP's internal network address translation or NO. 136ppp_profile="papchap" # Which profile to use from /etc/ppp/ppp.conf. 137ppp_user="root" # Which user to run ppp as 138 139### Network daemon (miscellaneous) ### 140syslogd_enable="YES" # Run syslog daemon (or NO). 141syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one. 142#syslogd_flags="-s" # Flags to syslogd (if enabled). 143syslogd_flags="-ss" # Syslogd flags to not bind an inet socket 144inetd_enable="NO" # Run the network daemon dispatcher (YES/NO). 145inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one. 146inetd_flags="-wW" # Optional flags to inetd 147# 148# named. It may be possible to run named in a sandbox, man security for 149# details. Note: when named_chrootdir is specified, RCNG automatically 150# adds '-u bind'. 151# 152named_enable="NO" # Run named, the DNS server (or NO). 153named_program="/usr/sbin/named" # path to named, if you want a different one. 154named_pidfile="/var/run/named.pid" # Pid file 155named_chrootdir="/etc/namedb" # Chroot directory (or "" not to auto-chroot it) 156 157# 158# kerberos. Do not run the admin daemons on slave servers 159# 160kerberos5_server_enable="NO" # Run a kerberos 5 master server (or NO). 161kerberos5_server="/usr/libexec/kdc" # path to kerberos 5 KDC 162kadmind5_server_enable="NO" # Run kadmind (or NO) 163kadmind5_server="/usr/libexec/kadmind" # path to kerberos 5 admin daemon 164kpasswdd_server_enable="NO" # Run kpasswdd (or NO) 165kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon 166 167rwhod_enable="NO" # Run the rwho daemon (or NO). 168rwhod_flags="" # Flags for rwhod 169rarpd_enable="NO" # Run rarpd (or NO). 170rarpd_flags="" # Flags to rarpd. 171bootparamd_enable="NO" # Run bootparamd (or NO). 172bootparamd_flags="" # Flags to bootparamd 173pppoed_enable="NO" # Run the PPP over Ethernet daemon. 174pppoed_provider="*" # Provider and ppp(8) config file entry. 175pppoed_flags="-P /var/run/pppoed.pid" # Flags to pppoed (if enabled). 176pppoed_interface="fxp0" # The interface that pppoed runs on. 177sshd_enable="NO" # Enable sshd 178sshd_program="/usr/sbin/sshd" # path to sshd, if you want a different one. 179sshd_flags="" # Additional flags for sshd. 180 181### Network File System (NFS): ### 182### Server-side options also need rpcbind_enable="YES" ### 183### 184### NOTE: attribute cache timeouts only effect NFS lookup rpc's. If 185### the mtime matches the data cache is left intact. 186### 187amd_enable="NO" # Run amd service with $amd_flags (or NO). 188amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map" 189amd_map_program="NO" # Can be set to "ypcat -k amd.master" 190nfs_client_enable="NO" # This host is an NFS client (or NO). 191nfs_client_flags="-n 4" # Flags to nfsiod (if enabled). 192nfs_access_cache="5" # Client attribute cache timeout in seconds 193#nfs_neg_cache="3" # Client attribute negative hit cache timeout 194nfs_server_enable="NO" # This host is an NFS server (or NO). 195nfs_server_flags="-u -t -n 4" # Flags to nfsd (if enabled). 196mountd_enable="NO" # Run mountd (or NO). 197mountd_flags="-r" # Flags to mountd (if NFS server enabled). 198weak_mountd_authentication="NO" # Allow non-root mount requests to be served. 199nfs_reserved_port_only="NO" # Provide NFS only on secure port (or NO). 200nfs_bufpackets="" # bufspace (in packets) for client 201rpc_lockd_enable="NO" # Run NFS rpc.lockd needed for client/server. 202rpc_statd_enable="NO" # Run NFS rpc.statd needed for client/server. 203rpc_umntall_enable="YES" # Run NFS rpc.umntall on boot and shutdown 204rpcbind_enable="NO" # Run the portmapper service (YES/NO). 205# this is rpcbind in 5.x 206rpcbind_program="/usr/sbin/portmap" # path to rpcbind, if you want a different one. 207rpcbind_flags="" # Flags to rpcbind (if enabled). 208rpc_ypupdated_enable="NO" # Run if NIS master and SecureRPC (or NO). 209keyserv_enable="NO" # Run the SecureRPC keyserver (or NO). 210keyserv_flags="" # Flags to keyserv (if enabled). 211 212### Network Time Services options: ### 213timed_enable="NO" # Run the time daemon (or NO). 214timed_flags="" # Flags to timed (if enabled). 215ntpd_enable="NO" # Run ntpd Network Time Protocol (or NO). 216ntpd_program="/usr/sbin/ntpd" # path to ntpd, if you want a different one. 217ntpd_flags="-s" # Flags to ntpd (if enabled). 218 219# Network Information Services (NIS) options: All need rpcbind_enable="YES" ### 220nis_client_enable="NO" # We're an NIS client (or NO). 221nis_client_flags="" # Flags to ypbind (if enabled). 222nis_ypset_enable="NO" # Run ypset at boot time (or NO). 223nis_ypset_flags="" # Flags to ypset (if enabled). 224nis_server_enable="NO" # We're an NIS server (or NO). 225nis_server_flags="" # Flags to ypserv (if enabled). 226nis_ypxfrd_enable="NO" # Run rpc.ypxfrd at boot time (or NO). 227nis_ypxfrd_flags="" # Flags to rpc.ypxfrd (if enabled). 228nis_yppasswdd_enable="NO" # Run rpc.yppasswdd at boot time (or NO). 229nis_yppasswdd_flags="" # Flags to rpc.yppasswdd (if enabled). 230 231### Network routing options: ### 232defaultrouter="NO" # Set to default gateway (or NO). 233static_routes="" # Set to static route list (or leave empty). 234gateway_enable="NO" # Set to YES if this host will be a gateway. 235router_enable="NO" # Set to YES to enable a routing daemon. 236router="/sbin/routed" # Name of routing daemon to use if enabled. 237router_flags="-q" # Flags for routing daemon. 238mrouted_enable="NO" # Do multicast routing (see /etc/mrouted.conf). 239mrouted_flags="" # Flags for multicast routing daemon. 240ipxgateway_enable="NO" # Set to YES to enable IPX routing. 241ipxrouted_enable="NO" # Set to YES to run the IPX routing daemon. 242ipxrouted_flags="" # Flags for IPX routing daemon. 243arpproxy_all="NO" # replaces obsolete kernel option ARP_PROXYALL. 244forward_sourceroute="NO" # do source routing (only if gateway_enable is set to "YES") 245accept_sourceroute="NO" # accept source routed packets to us 246 247### ATM interface options: ### 248atm_enable="NO" # Configure ATM interfaces (or NO). 249#atm_netif_hea0="atm 1" # Network interfaces for physical interface. 250#atm_sigmgr_hea0="uni31" # Signalling manager for physical interface. 251#atm_prefix_hea0="ILMI" # NSAP prefix (UNI interfaces only) (or ILMI). 252#atm_macaddr_hea0="NO" # Override physical MAC address (or NO). 253#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local). 254#atm_scsparp_atm0="NO" # Run SCSP/ATMARP on network interface (or NO). 255atm_pvcs="" # Set to PVC list (or leave empty). 256atm_arps="" # Set to permanent ARP list (or leave empty). 257 258### ISDN interface options: (see also: /usr/share/examples/isdn) ### 259isdn_enable="NO" # Enable the ISDN subsystem (or NO). 260isdn_fsdev="NO" # Output device for fullscreen mode (or NO for daemon mode). 261isdn_flags="-dn -d0x1f9" # Flags for isdnd 262isdn_ttype="cons25" # terminal type for fullscreen mode 263isdn_screenflags="NO" # screenflags for ${isdn_fsdev} 264isdn_trace="NO" # Enable the ISDN trace subsystem (or NO). 265isdn_traceflags="-f /var/tmp/isdntrace0" # Flags for isdntrace 266 267### Miscellaneous network options: ### 268icmp_bmcastecho="NO" # respond to broadcast ping packets 269 270### IPv6 options: ### 271ipv6_enable="NO" # Set to YES to set up for IPv6. 272ipv6_network_interfaces="auto" # List of network interfaces (or "auto"). 273ipv6_defaultrouter="NO" # Set to IPv6 default gateway (or NO). 274#ipv6_defaultrouter="2002:c058:6301::" # Use this for 6to4 (RFC 3068) 275ipv6_static_routes="" # Set to static route list (or leave empty). 276#ipv6_static_routes="xxx" # An example to set fec0:0000:0000:0006::/64 277 # route toward loopback interface. 278#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1" 279ipv6_gateway_enable="NO" # Set to YES if this host will be a gateway. 280ipv6_router_enable="NO" # Set to YES to enable an IPv6 routing daemon. 281ipv6_router="/usr/sbin/route6d" # Name of IPv6 routing daemon. 282ipv6_router_flags="" # Flags to IPv6 routing daemon. 283#ipv6_router_flags="-l" # Example for route6d with only IPv6 site local 284 # addrs. 285#ipv6_router_flags="-q" # If you want to run a routing daemon on an end 286 # node, you should stop advertisement. 287#ipv6_network_interfaces="ed0 ep0" # Examples for router 288 # or static configuration for end node. 289 # Choose correct prefix value. 290#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002" # Examples for rtr. 291#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004" # Examples for rtr. 292#ipv6_ifconfig_ed0="fec0:0:0:5::1 prefixlen 64" # Sample manual assign entry 293#ipv6_ifconfig_ed0_alias0="fec0:0:0:5::2 prefixlen 64" # Sample alias entry. 294ipv6_default_interface="NO" # Default output interface for scoped addrs. 295 # Now this works only for IPv6 link local 296 # multicast addrs. 297rtadvd_enable="NO" # Set to YES to enable an IPv6 router 298 # advertisement daemon. If set to YES, 299 # this router becomes a possible candidate 300 # IPv6 default router for local subnets. 301rtadvd_interfaces="" # Interfaces rtadvd sends RA packets. 302mroute6d_enable="NO" # Do IPv6 multicast routing. 303mroute6d_program="/usr/local/sbin/pim6dd" # Name of IPv6 multicast 304 # routing daemon. You need to 305 # install it from package or 306 # port. 307mroute6d_flags="" # Flags to IPv6 multicast routing daemon. 308stf_interface_ipv4addr="" # Local IPv4 addr for 6to4 IPv6 over IPv4 309 # tunneling interface. Specify this entry 310 # to enable 6to4 interface. 311stf_interface_ipv4plen="0" # Prefix length for 6to4 IPv4 addr, 312 # to limit peer addr range. Effective value 313 # is 0-31. 314stf_interface_ipv6_ifid="0:0:0:1" # IPv6 interface id for stf0. 315 # If you like, you can set "AUTO" for this. 316stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0 317ipv6_faith_prefix="NO" # Set faith prefix to enable a FAITH 318 # IPv6-to-IPv4 TCP translator. You also need 319 # faithd(8) setup. 320ipv6_ipv4mapping="NO" # Set to "YES" to enable IPv4 mapped IPv6 addr 321 # communication. (like ::ffff:a.b.c.d) 322ipv6_firewall_enable="NO" # Set to YES to enable IPv6 firewall 323 # functionality 324ipv6_firewall_script="/etc/rc.firewall6" # Which script to run to set up the IPv6 firewall 325ipv6_firewall_type="UNKNOWN" # IPv6 Firewall type (see /etc/rc.firewall6) 326ipv6_firewall_quiet="NO" # Set to YES to suppress rule display 327ipv6_firewall_logging="NO" # Set to YES to enable events logging 328ipv6_firewall_flags="" # Flags passed to ip6fw when type is a file 329ipv6_ipfilter_rules="/etc/ipf6.rules" # rules definition file for ipfilter, 330 # see /usr/src/contrib/ipfilter/rules 331 # for examples 332 333############################################################## 334### System console options ################################# 335############################################################## 336 337keymap="NO" # keymap in /usr/share/syscons/keymaps/* (or NO). 338keyrate="NO" # keyboard rate to: slow, normal, fast (or NO). 339keybell="NO" # See kbdcontrol(1) for options. Use "off" to disable. 340keychange="NO" # function keys default values (or NO). 341cursor="NO" # cursor type {normal|blink|destructive} (or NO). 342scrnmap="NO" # screen map in /usr/share/syscons/scrnmaps/* (or NO). 343font8x16="NO" # font 8x16 from /usr/share/syscons/fonts/* (or NO). 344font8x14="NO" # font 8x14 from /usr/share/syscons/fonts/* (or NO). 345font8x8="NO" # font 8x8 from /usr/share/syscons/fonts/* (or NO). 346blanktime="300" # blank time (in seconds) or "NO" to turn it off. 347saver="NO" # screen saver: Uses /modules/${saver}_saver.ko 348moused_enable="NO" # Run the mouse daemon. 349moused_type="auto" # See man page for rc.conf(5) for available settings. 350moused_port="/dev/psm0" # Set to your mouse port. 351moused_flags="" # Any additional flags to moused. 352mousechar_start="NO" # if 0xd0-0xd3 default range is occupied in your 353 # language code table, specify alternative range 354 # start like mousechar_start=3, see vidcontrol(1) 355allscreens_flags="" # Set this vidcontrol mode for all virtual screens 356allscreens_kbdflags="" # Set this kbdcontrol mode for all virtual screens 357 358 359############################################################## 360### pcvt console driver options ############################ 361############################################################## 362 363pcvt_verbose="NO" # set to YES to enable verbose configuration messages 364pcvt_keymap="NO" # keyboard map in /usr/share/misc/keycap.pcvt (or NO). 365pcvt_keydel="NO" # key repeat delay, 0-3 (250,500,750,1000 msec) (or NO). 366pcvt_keyrate="NO" # keyboard repetition rate 31-0 (2-30 char/sec) (or NO). 367pcvt_keyrepeat="NO" # keyboard repeat ON or OFF (or NO). 368pcvt_force24="NO" # force a 24 line display (when 25 possible) (or NO). 369pcvt_hpext="NO" # use HP extensions (function keys labels) (or NO). 370pcvt_lines="NO" # lines (25, 28, 40, 50 or NO). 371pcvt_blanktime="NO" # blank time (in seconds) (or NO). 372pcvt_cursorh="NO" # cursor top scanline (topmost line is 0) (or NO). 373pcvt_cursorl="NO" # cursor low scanline (bottom line is 16) (or NO). 374pcvt_monohigh="NO" # set intensity to high on monochrome monitors (or NO). 375 376 377############################################################## 378### Mail Transfer Agent (MTA) options ###################### 379############################################################## 380 381mta_start_script="/etc/rc.sendmail" 382 # Script to start your chosen MTA, called by /etc/rc. 383# Settings for /etc/rc.sendmail: 384sendmail_enable="NO" # Run the sendmail inbound daemon (YES/NO). 385sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server) 386sendmail_submit_enable="YES" # Start a localhost-only MTA for mail submission 387sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost" 388 # Flags for localhost-only MTA 389sendmail_outbound_enable="YES" # Dequeue stuck mail (YES/NO). 390sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only) 391sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO). 392sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m" 393 # Flags for sendmail_msp_queue daemon. 394 395 396############################################################## 397### Miscellaneous administrative options ################### 398############################################################## 399 400mixer_enable="NO" # Manage mixer settings across reboots 401cron_enable="YES" # Run the periodic job daemon. 402cron_program="/usr/sbin/cron" # Which cron executable to run (if enabled). 403cron_flags="" # Which options to pass to the cron daemon. 404lpd_enable="NO" # Run the line printer daemon. 405lpd_program="/usr/sbin/lpd" # path to lpd, if you want a different one. 406lpd_flags="" # Flags to lpd (if enabled). 407usbd_enable="NO" # Run the usbd daemon. 408usbd_flags="" # Flags to usbd (if enabled). 409dumpdev="NO" # Device name to crashdump to (or NO). 410dumpdir="/var/crash" # Directory where crash dumps are to be stored 411savecore_flags="" # Used if dumpdev is enabled above, and present. 412enable_quotas="NO" # turn on quotas on startup (or NO). 413check_quotas="YES" # Check quotas on startup (or NO). 414accounting_enable="NO" # Turn on process accounting (or NO). 415ibcs2_enable="NO" # Ibcs2 (SCO) emulation loaded at startup (or NO). 416ibcs2_loaders="coff" # List of additional Ibcs2 loaders (or NO). 417sysvipc_enable="NO" # Load System V IPC primitives at startup (or NO). 418linux_enable="NO" # Linux binary compatibility loaded at startup (or NO). 419svr4_enable="NO" # SysVR4 emulation loaded at startup (or NO). 420osf1_enable="NO" # Alpha OSF/1 emulation loaded at startup (or NO). 421clear_tmp_enable="NO" # Clear /tmp at startup. 422ldconfig_insecure="NO" # Set to YES to disable ldconfig security checks 423ldconfig_paths="/usr/lib/compat /usr/X11R6/lib /usr/local/lib" 424 # shared library search paths 425ldconfig_paths_aout="/usr/lib/compat/aout /usr/X11R6/lib/aout /usr/local/lib/aout" 426 # a.out shared library search paths 427kern_securelevel_enable="NO" # kernel security level (see init(8)), 428kern_securelevel="-1" # range: -1..3 ; `-1' is the most insecure 429lomac_enable="NO" # start lomac(4) security module at boot 430update_motd="YES" # update version info in /etc/motd (or NO) 431start_vinum="NO" # set to YES to start vinum 432unaligned_print="YES" # print unaligned access warnings on the alpha (or NO). 433rand_irqs="NO" # Stir the entropy pool (like "5 11" or NO). 434dmesg_enable="YES" # Save dmesg(8) to /var/run/dmesg.boot 435jail_enable="NO" # Set to NO to disable starting of any jails 436jail_list="" # Space separated list of names of jails 437jail_set_hostname_allow="YES" # Allow root user in a jail to change its hostname 438jail_socket_unixiproute_only="YES" # Route only TCP/IP within a jail 439jail_sysvipc_allow="NO" # Allow SystemV IPC use from within a jail 440resident_enable="NO" # Proccess /etc/resident.conf 441varsym_enable="NO" # Proccess /etc/varsym.conf 442watchdogd_enable="NO" # Start the software watchdog daemon 443 444############################################################## 445### Define source_rc_confs, the mechanism used by /etc/rc.* ## 446### scripts to source rc_conf_files overrides safely. ## 447############################################################## 448 449if [ -z "${source_rc_confs_defined}" ]; then 450 source_rc_confs_defined=yes 451 source_rc_confs () { 452 local i sourced_files 453 for i in ${rc_conf_files}; do 454 case ${sourced_files} in 455 *:$i:*) 456 ;; 457 *) 458 sourced_files="${sourced_files}:$i:" 459 if [ -r $i ]; then 460 . $i 461 fi 462 ;; 463 esac 464 done 465 } 466fi 467