1# $FreeBSD: src/etc/defaults/make.conf,v 1.97.2.80 2003/02/15 16:34:56 trhodes Exp $ 2# $DragonFly: src/etc/defaults/make.conf,v 1.11 2005/01/10 19:56:17 joerg Exp $ 3# 4# NOTE: Please would any committer updating this file also update the 5# make.conf(5) manual page, if necessary, which is located in 6# src/share/man/man5/make.conf.5. 7# 8# This file, if present, will be read by make (see /usr/share/mk/sys.mk). 9# It allows you to override macro definitions to make without changing 10# your source tree, or anything the source tree installs. 11# 12# This file must be in valid Makefile syntax. 13# 14# You have to find the things you can put here in the Makefiles and 15# documentation of the source tree. 16# 17# 18# The CPUTYPE variable controls which processor should be targeted for 19# generated code. This controls processor-specific optimizations in 20# certain code (currently only OpenSSL) as well as modifying the value 21# of CFLAGS to contain the appropriate optimization directive to gcc. 22# The automatic setting of CFLAGS may be overridden using the 23# NO_CPU_CFLAGS variable below. 24# Currently the following CPU types are recognized: 25# Intel x86 architecture: 26# (AMD CPUs) k7 k6-2 k6 k5 27# (Intel CPUs) p4 p3 p2 i686 i586/mmx i586 i486 i386 28# Alpha/AXP architecture: ev6 pca56 ev56 ev5 ev45 ev4 29# 30# If you experience any problems after setting this flag, please unset 31# it again before submitting a bug report or attempting to modify code. 32# It may be that certain types of software will become unstable after being 33# compiled with processor-specific (or higher - see below) optimization flags. 34# If in doubt, do not set CPUTYPE or CFLAGS to non-default values. 35# 36#CPUTYPE=i686 37#NO_CPU_CFLAGS= true # Don't add -march=<cpu> to CFLAGS automatically 38#NO_CPU_COPTFLAGS=true # Don't add -march=<cpu> to COPTFLAGS automatically 39# 40# The CCVER variable controls which GCC-version to use by default. It 41# should be set using ?= so as not to interfere with CCVER overrides from 42# userland or the buildworld. We currently recommend that an override NOT 43# be set in /etc/make.conf and that gcc 3.4 not yet be used to build the boot 44# blocks, boot loader, or the kernel. 45# 46# CCVER?=gcc2 # (use GCC 2.95.x, default) 47# CCVER?=gcc34 # (use GCC 3.4, experimental) 48# 49# 50# CFLAGS controls the compiler settings used when compiling C code. 51# Note that optimization settings above -O (-O2, ...) are not recommended 52# or supported for compiling the world or the kernel - please revert any 53# nonstandard optimization settings to "-O" before submitting bug reports 54# to the developers. 55# Note also that at this time the -O2 setting is known to produce BROKEN 56# CODE on the Alpha platform. 57# 58#CFLAGS= -O -pipe 59# 60# CXXFLAGS controls the compiler settings used when compiling C++ code. 61# Note that CXXFLAGS is initially set to the value of CFLAGS. If you wish 62# to add to CXXFLAGS value, "+=" must be used rather than "=". Using "=" 63# alone will remove the often needed contents of CFLAGS from CXXFLAGS. 64# 65#CXXFLAGS+= -fmemoize-lookups -fsave-memoized 66# 67# BDECFLAGS are a set of gcc warning settings that Bruce Evans has suggested 68# for use in developing FreeBSD and testing changes. They can be used by 69# putting "CFLAGS+=${BDECFLAGS}" in /etc/make.conf. -Wconversion is not 70# included here due to compiler bugs, e.g., mkdir()'s mode_t argument. 71# 72BDECFLAGS= -W -Wall -ansi -pedantic -Wbad-function-cast -Wcast-align \ 73 -Wcast-qual -Wchar-subscripts -Winline \ 74 -Wmissing-prototypes -Wnested-externs -Wpointer-arith \ 75 -Wredundant-decls -Wshadow -Wstrict-prototypes -Wwrite-strings 76# 77# WARNS_WERROR causes -Werror to be added when WARNS is in effect. 78# 79#WARNS_WERROR= yes 80# 81# To compile just the kernel with special optimizations, you should use 82# this instead of CFLAGS (which is not applicable to kernel builds anyway). 83# There is very little to gain by using higher optimization levels, and doing 84# so can cause problems. 85# 86#COPTFLAGS= -O -pipe 87# 88# Strip the file before installing. Setting this to nothing will keep 89# the debugging symbols in the installed files. 90#STRIP= -s 91# 92# Compare before install 93#INSTALL=install -C 94# 95# To enable installing suidperl with the setuid bit turned on 96#ENABLE_SUIDPERL= true 97# 98# To build ppp with normal permissions 99#PPP_NOSUID= true 100# 101# To enable installing ssh(1) with the setuid bit turned on 102#ENABLE_SUID_SSH= true 103# 104# To avoid building various parts of the base system: 105#NO_CVS= true # do not build CVS 106#NO_BIND= true # do not build BIND 107#NO_FORTRAN= true # do not build g77 and related libraries 108#NO_I4B= true # do not build isdn4bsd package 109#NO_IPFILTER= true # do not build IP Filter package 110#NO_LPR= true # do not build lpr and related programs 111#NO_MAILWRAPPER=true # do not build the mailwrapper(8) MTA selector 112#NO_MODULES= true # do not build modules with the kernel 113#NO_OBJC= true # do not build Objective C support 114#NO_OPENSSH= true # do not build OpenSSH 115#NO_OPENSSL= true # do not build OpenSSL (implies NO_OPENSSH) 116#NO_SENDMAIL= true # do not build sendmail and related programs 117#NO_SHAREDOCS= true # do not build the 4.4BSD legacy docs 118#NO_X= true # do not compile in XWindows support (e.g. doscmd) 119#NOCRYPT= true # do not build any crypto code 120#NOGAMES= true # do not build games (games/ subdir) 121#NOINFO= true # do not make or install info files 122#NOLIBC_R= true # do not build libc_r (re-entrant version of libc) 123#NOMAN= true # do not build manual pages 124#NOPROFILE= true # Avoid compiling profiled libraries 125#NOSHARE= true # do not go into the share subdir 126# 127# To build sys/modules when building the world (our old way of doing things) 128#MODULES_WITH_WORLD=true # do not build modules when building kernel 129# 130# The list of modules to build instead of all of them. 131#MODULES_OVERRIDE= emulation/linux net/ipfw 132# 133# The following controls building optional IDEA code in libcrypto and 134# certain ports. Patents are involved - you must not use this unless 135# you either have a license or fall within patent 'fair use' 136# provisions. 137# 138# *** It is YOUR RESPONSIBILITY to determine if you can use this! *** 139# 140# IDEA is patented in the USA and many European countries - thought to 141# be OK to use for any non-commercial use. This is optional. 142#MAKE_IDEA= YES # IDEA (128 bit symmetric encryption) 143# 144# To avoid running MAKEDEV all on /dev during install: 145#NO_MAKEDEV= true 146# 147# If you do not want unformatted manual pages to be compressed 148# when they are installed: 149# 150#NOMANCOMPRESS= true 151# 152# 153# If you want the "compat" shared libraries installed as part of your normal 154# builds, uncomment these: 155# 156#COMPAT1X= yes 157#COMPAT20= yes 158#COMPAT21= yes 159#COMPAT22= yes 160#COMPAT3X= yes 161#COMPAT4X= yes 162# 163# 164# If you do not want additional documentation (some of which are 165# a few hundred KB's) for ports to be installed: 166# 167#NOPORTDOCS= true 168# 169# 170# Default format for system documentation, depends on your printer. 171# Set this to "ascii" for simple printers or screen 172# 173#PRINTERDEVICE= ps 174# 175# 176# How long to wait for a console keypress before booting the default kernel. 177# This value is approximately in milliseconds. Keypresses are accepted by the 178# BIOS before booting from disk, making it possible to give custom boot 179# parameters even when this is set to 0. 180# 181#BOOTWAIT=0 182#BOOTWAIT=30000 183# 184# By default, the system will always use the keyboard/video card as system 185# console. However, the boot blocks may be dynamically configured to use a 186# serial port in addition to or instead of the keyboard/video console. 187# 188# By default we use COM1 as our serial console port *if* we're going to use 189# a serial port as our console at all. Alter as necessary. 190# 191# COM1: = 0x3F8, COM2: = 0x2F8, COM3: = 0x3E8, COM4: = 0x2E8 192# 193#BOOT_COMCONSOLE_PORT= 0x3F8 194# 195# The default serial console speed is 9600. Set the speed to a larger value 196# for better interactive response. 197# 198#BOOT_COMCONSOLE_SPEED= 115200 199# 200# By default the 'pxeboot' loader retrieves the kernel via NFS. Defining 201# this and recompiling /usr/src/sys/boot will cause it to retrieve the kernel 202# via TFTP. This allows pxeboot to load a custom BOOTP diskless kernel yet 203# still mount the server's '/' (i.e. rather than load the server's kernel). 204# 205#LOADER_TFTP_SUPPORT= YES 206# 207# By default, the ports collection attempts to use XFree86 4.X. If 208# you are running XFree86 3.3.X, uncomment this line. 209# 210#XFREE86_VERSION= 3 211# 212# By default, this points to /usr/X11R6 for XFree86 releases 3.0 or earlier. 213# If you have a XFree86 from before 3.0 that has the X distribution in 214# /usr/X386, you want to uncomment this. 215# 216#X11BASE= /usr/X386 217# 218# 219# If you have Motif on your system, uncomment this. 220# 221#HAVE_MOTIF= yes 222#MOTIF_STATIC= yes 223# 224# If the default location of the Motif library (specified below) is NOT 225# appropriate for you, uncomment this and change it to the correct value. 226# If your motif is in ${X11BASE}/lib, you don't need to touch this line. 227# 228#MOTIFLIB= -L${X11BASE}/lib -lXm 229# 230# 231# If you're resident in the USA, this will help various ports to determine 232# whether or not they should attempt to comply with the various U.S. 233# export regulations on certain types of software which do not apply to 234# anyone else in the world. 235# 236#USA_RESIDENT= YES 237# 238# 239# Override "don't install a port that's already installed" behavior. 240# One might wish to do this for ports debugging or to unconditionally 241# reinstall a set of suspect/broken ports. 242# 243#FORCE_PKG_REGISTER= YES 244# 245# 246# If you're behind a firewall and need FTP or HTTP proxy services for 247# ports collection fetching to work, the following examples give the 248# necessary syntax. See the fetch(3) man page for details. 249# 250#FETCH_ENV= FTP_PROXY=ftp://10.0.0.1:21 251#FETCH_ENV= HTTP_PROXY=http://10.0.0.1:80 252# 253# 254# Port master sites. 255# 256# If you want your port fetches to go somewhere else than the default 257# (specified below) in case the distfile/patchfile was not found, 258# uncomment this and change it to a location nearest you. (Don't 259# remove the "/${DIST_SUBDIR}/" part.) 260# 261#MASTER_SITE_BACKUP?= \ 262# ftp://ftp.freebsd.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ 263# 264# If you want your port fetches to check the above site first (before 265# the MASTER_SITES specified in the port Makefiles), uncomment the 266# line below. You can also change the right side to point to wherever 267# you want. 268# 269#MASTER_SITE_OVERRIDE?= ${MASTER_SITE_BACKUP} 270# 271# Some ports use a special variable to point to a collection of 272# mirrors of well-known software archives. If you have a mirror close 273# to you, uncomment any of the following lines and change it to that 274# address. (Don't remove the "/%SUBDIR%/" part.) 275# 276# Note: the right hand sides of the following lines are only for your 277# information. For a full list of default sites, take a look at 278# bsd.sites.mk. 279# 280#MASTER_SITE_AFTERSTEP= ftp://ftp.afterstep.org/%SUBDIR%/ 281#MASTER_SITE_COMP_SOURCES= ftp://gatekeeper.dec.com/pub/usenet/comp.sources.%SUBDIR%/ 282#MASTER_SITE_FREEBSD_ORG= ftp://ftp.FreeBSD.org/pub/FreeBSD/%SUBDIR%/ 283#MASTER_SITE_GNOME= ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/ 284#MASTER_SITE_GNU= ftp://ftp.gnu.org/gnu/%SUBDIR%/ 285#MASTER_SITE_KDE= ftp://ftp.kde.org/pub/kde/%SUBDIR%/ 286#MASTER_SITE_LOCAL= ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/local-distfiles/%SUBDIR%/ 287#MASTER_SITE_MOZILLA= ftp://ftp.mozilla.org/pub/%SUBDIR%/ 288#MASTER_SITE_NETBSD= ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/%SUBDIR%/ 289#MASTER_SITE_PERL_CPAN= ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ 290#MASTER_SITE_PORTS_JP= ftp://ports.jp.FreeBSD.org/pub/FreeBSD-jp/ports-jp/LOCAL_PORTS/%SUBDIR%/ 291#MASTER_SITE_RINGSERVER= ftp://ftp.dnsbalance.ring.gr.jp/pub/%SUBDIR%/ 292#MASTER_SITE_RUBY= ftp://ftp.ruby-lang.org/pub/ruby/%SUBDIR%/ 293#MASTER_SITE_SOURCEFORGE= ftp://ftp2.sourceforge.net/pub/sourceforge/%SUBDIR%/ 294#MASTER_SITE_SOURCEWARE= ftp://ftp.freesoftware.com/pub/sourceware/%SUBDIR%/ 295#MASTER_SITE_SUNSITE= ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ 296#MASTER_SITE_TCLTK= ftp://ftp.scriptics.com/pub/tcl/%SUBDIR%/ 297#MASTER_SITE_TEX_CTAN= ftp://ftp.tex.ac.uk/tex-archive/%SUBDIR%/ 298#MASTER_SITE_THEMES= ftp://ftp.themes.org/pub/themes/%SUBDIR%/ 299#MASTER_SITE_WINDOWMAKER= ftp://ftp.windowmaker.org/pub/%SUBDIR%/ 300#MASTER_SITE_XCONTRIB= ftp://ftp.x.org/contrib/%SUBDIR%/ 301#MASTER_SITE_XEMACS= ftp://ftp.xemacs.org/pub/xemacs/%SUBDIR%/ 302#MASTER_SITE_XFREE= ftp://ftp.xfree86.org/pub/XFree86/%SUBDIR%/source/ 303# 304# Also it is highly recommended that you configure MASTER_SORT_REGEX 305# to choose better mirror sites for you. List awk(1)-style regular 306# expressions separated by space so MASTER_SITES will be sorted in 307# that order. The following example is for Japanese users; change 308# "jp" part to your ccTLD ("de", "ru", "uk", etc.) or the domain names 309# of your nearest/upstream networks to meet your needs. 310# 311#MASTER_SORT_REGEX?= ://[^/]*\.jp[/.] 312# 313# Ports can place their working directories somewhere other than under 314# /usr/ports. 315#WRKDIRPREFIX= /var/tmp 316# 317# Kerberos 5 318# If you want Kerberos 5 (KTH Heimdal), define this: 319# 320#MAKE_KERBEROS5= yes 321# 322# Kerberos 5 su (k5su) 323# If you want to use the k5su utility, define this to have it installed 324# set-user-ID. 325#ENABLE_SUID_K5SU= yes 326# 327# 328# Kerberos5 329# If you want to install MIT Kerberos5 port somewhere other than /usr/local, 330# define this (this is also used to tell ssh1 that kerberos is needed): 331# 332#KRB5_HOME= /usr/local 333# 334# 335# CVSup update flags. Edit SUPFILE settings to reflect whichever distribution 336# file(s) you use on your site (see /usr/share/examples/cvsup/README for more 337# information on CVSup and these files). To use, do "make update" in /usr/src. 338# 339#SUP_UPDATE= yes 340# 341#SUP= /usr/local/bin/cvsup 342#SUPFLAGS= -g -L 2 343#SUPHOST= cvsup.uk.FreeBSD.org 344#SUPFILE= /usr/share/examples/cvsup/stable-supfile 345#PORTSSUPFILE= /usr/share/examples/cvsup/ports-supfile 346#DOCSUPFILE= /usr/share/examples/cvsup/doc-supfile 347# 348# top(1) uses a hash table for the user names. The size of this hash 349# can be tuned to match the number of local users. The table size should 350# be a prime number approximately twice as large as the number of lines in 351# /etc/passwd. The default number is 20011. 352# 353#TOP_TABLE_SIZE= 101 354# 355# Documentation 356# 357# The list of languages and encodings to build and install 358# 359#DOC_LANG= en_US.ISO8859-1 ru_RU.KOI8-R 360# 361# 362# sendmail 363# 364# The following sets the default m4 configuration file to use at 365# install time. Use with caution as a make install will overwrite 366# any existing /etc/mail/sendmail.cf. Note that SENDMAIL_CF is now 367# deprecated. The value should be a fully qualified path name. 368# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 369# create /etc/mail/sendmail.cf before installworld installs an 370# updated sendmail binary. 371# 372#SENDMAIL_MC=/etc/mail/myconfig.mc 373# 374# The following sets the default m4 configuration file for mail 375# submission to use at install time. Use with caution as a make 376# install will overwrite any existing /etc/mail/submit.cf. The 377# value should be a fully qualified path name. 378# Avoid using a value of /etc/mail/submit.mc as a buildworld will 379# create /etc/mail/submit.cf before installworld installs an 380# updated sendmail binary. 381# 382#SENDMAIL_SUBMIT_MC=/etc/mail/mysubmit.mc 383# 384# If you need to build additional .cf files during a make buildworld, 385# include the full paths to the .mc files in SENDMAIL_ADDITIONAL_MC. 386# Avoid using a value of /etc/mail/sendmail.mc as a buildworld will 387# create /etc/mail/sendmail.cf before installworld installs an 388# updated sendmail binary. 389# 390#SENDMAIL_ADDITIONAL_MC=/etc/mail/foo.mc /etc/mail/bar.mc 391# 392# Setting the following variable modifies the flags passed to m4 when 393# building a .cf file from a .mc file. It can be used to enable 394# features disabled by default. 395# 396#SENDMAIL_M4_FLAGS= 397# 398# Setting the following variables modifies the build environment for 399# sendmail and its related utilities. For example, SASL support can be 400# added with settings such as: 401# 402# with SASLv1: 403# SENDMAIL_CFLAGS=-I/usr/local/include/sasl1 -DSASL 404# SENDMAIL_LDFLAGS=-L/usr/local/lib 405# SENDMAIL_LDADD=-lsasl 406# 407# with SASLv2: 408# SENDMAIL_CFLAGS=-I/usr/local/include -DSASL=2 409# SENDMAIL_LDFLAGS=-L/usr/local/lib 410# SENDMAIL_LDADD=-lsasl2 411# 412# Note: If you are using Cyrus SASL with other applications which require 413# access to the sasldb file, you should add the following to your 414# sendmail.mc file: 415# 416# define(`confDONT_BLAME_SENDMAIL',`GroupReadableSASLDBFile') 417# 418#SENDMAIL_CFLAGS= 419#SENDMAIL_LDFLAGS= 420#SENDMAIL_LDADD= 421#SENDMAIL_DPADD= 422# 423# Setting SENDMAIL_SET_USER_ID will install the sendmail binary as a 424# set-user-ID root binary instead of a set-group-ID smmsp binary and will 425# prevent the installation of /etc/mail/submit.cf. 426# This is a deprecated mode of operation. See etc/mail/README for more 427# information. 428# 429#SENDMAIL_SET_USER_ID= 430# 431# The permissions to use on alias and map databases generated using 432# /etc/mail/Makefile. Defaults to 0640. 433# 434#SENDMAIL_MAP_PERMS= 435