1# 2# $FreeBSD: src/Makefile.inc1,v 1.141.2.62 2003/04/06 19:54:00 dwmalone Exp $ 3# $DragonFly: src/Makefile.inc1,v 1.118 2008/06/24 20:22:30 thomas Exp $ 4# 5# Build-time options are documented in make.conf(5). 6# 7# The intended user-driven targets are: 8# 9# buildworld - rebuild *everything*, including glue to help do upgrades 10# quickworld - skip the glue and do a depend+build on the meat 11# realquickworld - skip the glue and depend stages and just build the meat 12# crossworld - only build the glue (particularly the cross-build environment) 13# installworld- install everything built by "buildworld" 14# most - build user commands, no libraries or include files 15# installmost - install user commands, no libraries or include files 16# 17# Standard targets (not defined here) are documented in the makefiles in 18# /usr/share/mk. These include: 19# obj depend all install clean cleandepend cleanobj 20 21# Put initial settings here. 22SUBDIR= 23 24# We must do share/info early so that installation of info `dir' 25# entries works correctly. Do it first since it is less likely to 26# grow dependencies on include and lib than vice versa. 27.if exists(${.CURDIR}/share/info) 28SUBDIR+= share/info 29.endif 30 31# We must do include and lib early so that the perl *.ph generation 32# works correctly as it uses the header files installed by this. 33.if exists(${.CURDIR}/include) 34SUBDIR+= include 35.endif 36.if exists(${.CURDIR}/lib) 37SUBDIR+= lib 38.endif 39# This exists simply to ensure that the obj dir hierarchy is 40# intact for nrelease, allowing the nrelease Makefile's to 41# reference ${.OBJDIR}. 42# 43.if exists(${.CURDIR}/nrelease) 44SUBDIR+= nrelease 45.endif 46 47.if exists(${.CURDIR}/bin) 48SUBDIR+= bin 49.endif 50.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 51SUBDIR+= games 52.endif 53.if exists(${.CURDIR}/gnu) 54SUBDIR+= gnu 55.endif 56.if exists(${.CURDIR}/libexec) 57SUBDIR+= libexec 58.endif 59.if exists(${.CURDIR}/sbin) 60SUBDIR+= sbin 61.endif 62.if exists(${.CURDIR}/secure) && !defined(NO_CRYPT) 63SUBDIR+= secure 64.endif 65.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 66SUBDIR+= share 67.endif 68.if exists(${.CURDIR}/sys) 69SUBDIR+= sys 70.endif 71.if exists(${.CURDIR}/usr.bin) 72SUBDIR+= usr.bin 73.endif 74.if exists(${.CURDIR}/usr.sbin) 75SUBDIR+= usr.sbin 76.endif 77 78.if exists(${.CURDIR}/etc) 79SUBDIR+= etc 80.endif 81 82# These are last, since it is nice to at least get the base system 83# rebuilt before you do them. 84.if defined(LOCAL_DIRS) 85.for _DIR in ${LOCAL_DIRS} 86.if exists(${.CURDIR}/${_DIR}) & exists(${.CURDIR}/${_DIR}/Makefile) 87SUBDIR+= ${_DIR} 88.endif 89.endfor 90.endif 91 92.if defined(SUBDIR_OVERRIDE) 93SUBDIR= ${SUBDIR_OVERRIDE} 94.endif 95 96.if defined(NOCLEANDIR) 97CLEANDIR= clean cleandepend 98.else 99CLEANDIR= cleandir 100.endif 101 102.if defined(NO_CLEAN) 103NOCLEAN= # defined 104.endif 105 106# Object directory base in primary make. Note that when we rerun make 107# from inside this file we change MAKEOBJDIRPREFIX to the appropriate 108# subdirectory because the rest of the build system needs it that way. 109# The original object directory base is saved in OBJTREE. 110# 111MAKEOBJDIRPREFIX?= /usr/obj 112OBJTREE?= ${MAKEOBJDIRPREFIX} 113 114# Used for stage installs and pathing 115# 116DESTDIRBASE?= ${OBJTREE}${.CURDIR} 117 118# Remove DESTDIR from MAKEFLAGS. It is present in the environment 119# anyhow, and we need to be able to override it for stage installs 120.MAKEFLAGS:= ${.MAKEFLAGS:NDESTDIR=*} 121 122# This sets the compiler we use to build the world/kernel with 123WORLD_CCVER?= gcc41 124WORLD_BINUTILSVER?= binutils217 125 126# temporary until everybody has converted to x86_64 127.if ${MACHINE_ARCH} == "amd64" 128MACHINE_ARCH= x86_64 129.makeenv MACHINE_ARCH 130.endif 131 132TARGET_ARCH?= ${MACHINE_ARCH} 133.if ${TARGET_ARCH} == ${MACHINE_ARCH} 134TARGET?= ${MACHINE} 135.else 136TARGET?= ${TARGET_ARCH} 137.endif 138.if make(buildworld) 139BUILD_ARCH!= sysctl -n hw.machine_arch 140 141# temporary until everybody has converted to x86_64 142.if ${BUILD_ARCH} == "amd64" 143BUILD_ARCH= x86_64 144.endif 145 146.if ${MACHINE_ARCH} != ${BUILD_ARCH} 147.error To cross-build, set TARGET_ARCH. 148.endif 149.endif 150 151# Backwards compatibility with older make's or older sys.mk's. make 152# is expected to define MACHINE_PLATFORM. 153# 154.if !defined(MACHINE_PLATFORM) 155MACHINE_PLATFORM= pc32 156.endif 157 158# XXX this is ugly and we need to come up with a nicer solution 159.if !defined(TARGET_PLATFORM) 160.if ${TARGET_ARCH} == "i386" 161TARGET_PLATFORM= pc32 162.elif ${TARGET_ARCH} == "x86_64" 163TARGET_PLATFORM= pc64 164.else 165.error Unknown target architecture. 166.endif 167.endif 168 169THREAD_LIB?= thread_xu 170.if ${THREAD_LIB} == "c_r" 171.if defined(NO_LIBC_R) 172.error libc_r is chosen as the default thread library, but NO_LIBC_R is defined 173.endif 174.endif 175 176# BTOOLS (Natively built) All non-cross-development tools that the 177# main build needs. This includes things like 'mkdir' and 'rm'. 178# We will not use the native system's exec path once we start 179# on WORLD. (bootstrap-tools and build-tools or BTOOLS) 180# 181# CTOOLS (Natively built) Cross development tools which are specific 182# to the target architecture. 183# 184# WORLD (Cross built) Our ultimate buildworld, using only BTOOLS and 185# CTOOLS. 186# 187# MACHINE_PLATFORM Platform Architecture we are building on 188# MACHINE Machine Architecture (usually the same as MACHINE_ARCH) 189# MACHINE_ARCH Cpu Architecture we are building on 190# 191# TARGET_PLATFORM Platform Architecture we are building for 192# TARGET Machine Architecture we are building for 193# TARGET_ARCH Cpu Architecture we are building for 194# 195BTOOLSDEST= ${DESTDIRBASE}/btools_${MACHINE_ARCH} 196CTOOLSDEST= ${DESTDIRBASE}/ctools_${MACHINE_ARCH}_${TARGET_ARCH} 197WORLDDEST= ${DESTDIRBASE}/world_${TARGET_ARCH} 198 199# The bootstrap-tools path is used by the bootstrap-tools, build-tools, and 200# cross-tools stages to augment the existing command path to access newer 201# versions of certain utilities such as 'patch' that the cross-tools stage 202# might expect. 203# 204BTOOLSPATH= ${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 205 206# The strict temporary command path contains all binaries required 207# by the buildworld system after the cross-tools stage. 208# 209STRICTTMPPATH= ${CTOOLSDEST}/usr/sbin:${CTOOLSDEST}/usr/bin:${CTOOLSDEST}/bin:${CTOOLSDEST}/usr/games:${BTOOLSDEST}/usr/sbin:${BTOOLSDEST}/usr/bin:${BTOOLSDEST}/bin:${BTOOLSDEST}/usr/games 210 211TMPDIR?= /tmp 212TMPPID!= echo $$$$ 213 214# 215# Building a world goes through the following stages 216# 217# 1. bootstrap-tool stage [BMAKE] 218# This stage is responsible for creating programs that 219# are needed for backward compatibility reasons. They 220# are not built as cross-tools. 221# 2. build-tool stage [TMAKE] 222# This stage is responsible for creating the object 223# tree and building any tools that are needed during 224# the build process. 225# 3. cross-tool stage [XMAKE] 226# This stage is responsible for creating any tools that 227# are needed for cross-builds. A cross-compiler is one 228# of them. 229# 4. world stage [WMAKE] 230# This stage actually builds the world. 231# 5. install stage (optional) [IMAKE] 232# This stage installs a previously built world. 233# 234 235# bootstrap-tool stage 236# 237BMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 238 OBJTREE=${OBJTREE} \ 239 DESTDIR=${BTOOLSDEST} \ 240 PATH=${BTOOLSPATH}:${PATH} \ 241 INSTALL="sh ${.CURDIR}/tools/install.sh" 242 243BMAKE= ${BMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 244 -DNOINFO -DNOMAN -DNOPIC -DNOPROFILE -DNOSHARED \ 245 -DNO_WERROR -DNO_NLS 246 247# build-tool stage 248# 249TMAKEENV= MAKEOBJDIRPREFIX=${BTOOLSDEST} \ 250 OBJTREE=${OBJTREE} \ 251 DESTDIR= \ 252 PATH=${BTOOLSPATH}:${PATH} \ 253 INSTALL="sh ${.CURDIR}/tools/install.sh" 254 255TMAKE= ${TMAKEENV} ${MAKE} -f Makefile.inc1 -DBOOTSTRAPPING \ 256 -DNO_FORTRAN -DNOSHARED 257 258# cross-tool stage 259# 260# note: TOOLS_PREFIX points to the obj root holding the cross 261# compiler binaries, while USRDATA_PREFIX points to the obj root 262# holding the target environment (and also determines where cross-built 263# libraries, crt*.o, and include files are installed). 264# 265XMAKEENV= MAKEOBJDIRPREFIX=${CTOOLSDEST} \ 266 OBJTREE=${OBJTREE} \ 267 DESTDIR=${CTOOLSDEST} \ 268 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 269 TOOLS_PREFIX=${CTOOLSDEST} \ 270 USRDATA_PREFIX=${WORLDDEST} \ 271 PATH=${BTOOLSPATH}:${PATH} 272 273XMAKE= ${XMAKEENV} ${MAKE} -f Makefile.inc1 -DNO_FORTRAN -DNO_GDB \ 274 -DBOOTSTRAPPING -DNOSHARED 275 276# world stage, note the strict path and note that TOOLS_PREFIX is left 277# unset and USRDATA_PREFIX (which defaults to TOOLS_PREFIX) is set to empty, 278# which is primarily for the compiler so it targets / (e.g. /usr/<blah>) 279# for both binary and library paths, even though it is being compiled to 280# WORLDDEST. None of the programs in the world stage are ever actually 281# executed during the buildworld/installworld. 282# 283CROSSENV= MAKEOBJDIRPREFIX=${WORLDDEST} \ 284 OBJTREE=${OBJTREE} \ 285 MACHINE_ARCH=${TARGET_ARCH} \ 286 MACHINE=${TARGET} \ 287 MACHINE_PLATFORM=${TARGET_PLATFORM} \ 288 OBJFORMAT_PATH=${CTOOLSDEST} \ 289 HOST_CCVER=${HOST_CCVER} \ 290 CCVER=${WORLD_CCVER} \ 291 BINUTILSVER=${WORLD_BINUTILSVER} 292 293WMAKEENV= ${CROSSENV} \ 294 DESTDIR=${WORLDDEST} \ 295 INSTALL="sh ${.CURDIR}/tools/install.sh" \ 296 PATH=${STRICTTMPPATH} 297 298WMAKE= ${WMAKEENV} ${MAKE} -f Makefile.inc1 299 300# install stage 301# 302IMAKEENV= ${CROSSENV} \ 303 PATH=${STRICTTMPPATH} 304IMAKE= ${IMAKEENV} ${MAKE} -f Makefile.inc1 305 306# kernel stage 307# 308KMAKEENV= ${WMAKEENV} 309 310# buildworld 311# 312# Attempt to rebuild the entire system, with reasonable chance of 313# success, regardless of how old your existing system is. 314# 315_worldtmp: _cleantmp _mtreetmp 316.ORDER: _cleantmp _mtreetmp 317 318_cleantmp: 319 @echo 320 @echo "--------------------------------------------------------------" 321 @echo ">>> Rebuilding the temporary build tree" 322 @echo "--------------------------------------------------------------" 323.if !defined(NOCLEAN) 324 rm -rf ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 325.else 326 # XXX - These two can depend on any header file. 327 rm -f ${OBJTREE}${.CURDIR}/usr.bin/kdump/ioctl.c 328 rm -f ${OBJTREE}${.CURDIR}/usr.bin/truss/ioctl.c 329.endif 330 331_mtreetmp: 332 mkdir -p ${DESTDIRBASE} ${BTOOLSDEST} ${CTOOLSDEST} ${WORLDDEST} 333.for _dir in ${WORLDDEST} ${BTOOLSDEST} ${CTOOLSDEST} 334 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.root.dist \ 335 -p ${_dir}/ > /dev/null 336 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.usr.dist \ 337 -p ${_dir}/usr > /dev/null 338.endfor 339 mtree -deU -f ${.CURDIR}/etc/mtree/BSD.include.dist \ 340 -p ${WORLDDEST}/usr/include > /dev/null 341 ${LN} -sf ${.CURDIR}/sys ${WORLDDEST} 342 343_bootstrap-tools: 344 @echo 345 @echo "--------------------------------------------------------------" 346 @echo ">>> stage 1: bootstrap tools" 347 @echo "--------------------------------------------------------------" 348 cd ${.CURDIR}; ${BMAKE} bootstrap-tools 349_cleanobj: 350 @echo 351 @echo "--------------------------------------------------------------" 352 @echo ">>> stage 2a: cleaning up the object tree" 353 @echo "--------------------------------------------------------------" 354 cd ${.CURDIR}; ${WMAKE} ${CLEANDIR:S/^/par-/} 355_obj: 356 @echo 357 @echo "--------------------------------------------------------------" 358 @echo ">>> stage 2b: rebuilding the object tree" 359 @echo "--------------------------------------------------------------" 360 cd ${.CURDIR}; ${WMAKE} par-obj 361_build-tools: 362 @echo 363 @echo "--------------------------------------------------------------" 364 @echo ">>> stage 2c: build tools" 365 @echo "--------------------------------------------------------------" 366 cd ${.CURDIR}; ${TMAKE} build-tools 367_cross-tools: 368 @echo 369 @echo "--------------------------------------------------------------" 370 @echo ">>> stage 3: cross tools" 371 @echo "--------------------------------------------------------------" 372 cd ${.CURDIR}; ${XMAKE} cross-tools 373_includes: 374 @echo 375 @echo "--------------------------------------------------------------" 376 @echo ">>> stage 4a: populating ${WORLDDEST}/usr/include" 377 @echo "--------------------------------------------------------------" 378 cd ${.CURDIR}; ${WMAKE} SHARED=symlinks par-includes 379_libraries: 380 @echo 381 @echo "--------------------------------------------------------------" 382 @echo ">>> stage 4b: building libraries" 383 @echo "--------------------------------------------------------------" 384 cd ${.CURDIR}; ${WMAKE} -DNOHTML -DNOINFO -DNOMAN -DNOFSCHG libraries 385_depend: 386 @echo 387 @echo "--------------------------------------------------------------" 388 @echo ">>> stage 4c: make dependencies" 389 @echo "--------------------------------------------------------------" 390 cd ${.CURDIR}; ${WMAKE} par-depend 391everything: 392 @echo 393 @echo "--------------------------------------------------------------" 394 @echo ">>> stage 4d: building everything.." 395 @echo "--------------------------------------------------------------" 396 cd ${.CURDIR}; ${WMAKE} all 397 398# note: buildworld no longer depends on _cleanobj because we rm -rf the 399# entire object tree and built the bootstrap tools in a different location. 400# 401# buildworld - build everything from scratch 402# quickworld - skip the bootstrap, build, and cross-build steps 403# realquickworld - skip the bootstrap, build, crossbuild, and depend step. 404# 405# note: we include _obj in realquickworld to prevent accidental creation 406# of files in /usr/src. 407 408WMAKE_TGTS= 409.if !defined(SUBDIR_OVERRIDE) 410WMAKE_TGTS+= _worldtmp _bootstrap-tools 411.endif 412WMAKE_TGTS+= _obj _build-tools 413.if !defined(SUBDIR_OVERRIDE) 414WMAKE_TGTS+= _cross-tools 415.endif 416WMAKE_TGTS+= _includes _libraries _depend everything 417 418buildworld: ${WMAKE_TGTS} 419 420quickworld: _mtreetmp _obj _includes _libraries _depend everything 421 422realquickworld: _mtreetmp _obj _includes _libraries everything 423 424crossworld: _worldtmp _bootstrap-tools _obj _build-tools _cross-tools 425 426.ORDER: ${WMAKE_TGTS} 427.ORDER: _obj _includes 428.ORDER: _mtreetmp _obj 429 430# 431# installcheck 432# 433# Checks to be sure system is ready for installworld 434# 435installcheck: 436.if !defined(NO_SENDMAIL) 437 @pw usershow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 438 @pw groupshow smmsp || (echo "You may need to run 'make preupgrade' first"; exit 1) 439.endif 440 @pw usershow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 441 @pw groupshow authpf || (echo "You may need to run 'make preupgrade' first"; exit 1) 442 @pw groupshow _pflogd || (echo "You may need to run 'make preupgrade' first"; exit 1) 443.if !defined(DESTDIR) || ${DESTDIR} == "" || ${DESTDIR} == "/" 444 @case `uname -r` in 1.2*|1.3-*|1.3.*|1.4.*|1.5.0-*|1.5.1-*|1.5.2-*|1.5.3-*) echo "You must upgrade your kernel to at least 1.5.4 and reboot before you can safely installworld, due to libc/system call ABI changes" ; exit 1;; esac 445.endif 446# 447# installworld 448# 449# Installs everything compiled by a 'buildworld'. 450# 451installworld: installcheck 452 cd ${.CURDIR}; ${IMAKE} re${.TARGET:S/world$//} 453 ${INSTALL} -o root -g wheel -m 644 ${.CURDIR}/Makefile_upgrade.inc ${DESTDIR}/etc/upgrade/ 454 455# 456# reinstall 457# 458# If you have a build server, you can NFS mount the source and obj directories 459# and do a 'make reinstall' on the *client* to install new binaries from the 460# most recent server build. 461# 462reinstall: 463 @echo "--------------------------------------------------------------" 464 @echo ">>> Making hierarchy" 465 @echo "--------------------------------------------------------------" 466 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 hierarchy 467 @echo 468 @echo "--------------------------------------------------------------" 469 @echo ">>> Installing everything.." 470 @echo "--------------------------------------------------------------" 471 cd ${.CURDIR}; ${MAKE} -f Makefile.inc1 install 472.if !defined(NOMAN) && !defined(NO_MAKEDB_RUN) 473 @echo 474 @echo "--------------------------------------------------------------" 475 @echo ">>> Rebuilding man page indices" 476 @echo "--------------------------------------------------------------" 477 cd ${.CURDIR}/share/man; ${MAKE} makedb 478.endif 479 480# 481# buildkernel, nativekernel, quickkernel, and installkernel 482# 483# Which kernels to build and/or install is specified by setting 484# KERNCONF. If not defined a GENERIC kernel is built/installed. 485# Only the existing (depending TARGET) config files are used 486# for building kernels and only the first of these is designated 487# as the one being installed. 488# 489# You can specify INSTALLSTRIPPED=1 if you wish the installed 490# kernel and modules to be stripped of its debug info (required 491# symbols are left intact). You can specify INSTALLSTRIPPEDMODULES 492# if you only want to strip the modules of their debug info. These 493# only apply if you have DEBUG=-g in your kernel config or make line. 494# 495# Note that we have to use TARGET instead of TARGET_ARCH when 496# we're in kernel-land. Since only TARGET_ARCH is (expected) to 497# be set to cross-build, we have to make sure TARGET is set 498# properly. 499 500.if !defined(KERNCONF) && defined(KERNEL) 501KERNCONF= ${KERNEL} 502KERNWARN= yes 503.else 504# XXX makeshift fix to build the right kernel for the (target) architecture 505# We should configure this in the platform files somehow 506.if ${TARGET_ARCH} == "i386" 507KERNCONF?= GENERIC 508.else 509KERNCONF?= X86_64_GENERIC 510.endif 511.endif 512INSTKERNNAME?= kernel 513 514KRNLSRCDIR= ${.CURDIR}/sys 515KRNLCONFDIR= ${KRNLSRCDIR}/config 516KRNLOBJDIR= ${OBJTREE}${KRNLSRCDIR} 517KERNCONFDIR?= ${KRNLCONFDIR} 518 519BUILDKERNELS= 520INSTALLKERNEL= 521.for _kernel in ${KERNCONF} 522.if exists(${KERNCONFDIR}/${_kernel}) 523BUILDKERNELS+= ${_kernel} 524.if empty(INSTALLKERNEL) 525INSTALLKERNEL= ${_kernel} 526.endif 527.endif 528.endfor 529 530# kernel version numbers survive rm -rf 531# 532.for _kernel in ${BUILDKERNELS} 533.if exists(${KRNLOBJDIR}/${_kernel}/version) 534KERNEL_VERSION_${_kernel} != cat ${KRNLOBJDIR}/${_kernel}/version 535.endif 536.endfor 537 538# 539# buildkernel 540# 541# Builds all kernels defined by BUILDKERNELS. 542# 543bk_tools: 544 @if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 545 echo "You must buildworld before buildkernel. If you wish"; \ 546 echo "to build a kernel using native tools, config it manually"; \ 547 echo "or use the nativekernel target if you are in a rush"; \ 548 exit 1; \ 549 fi 550 551maybe_bk_tools: 552.for _kernel in ${BUILDKERNELS} 553 @if [ ! -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 554 if [ ! -f ${WORLDDEST}/.libraries_done ]; then \ 555 echo "The kernel was build using buildworld tools which no" ; \ 556 echo "longer appear to exist, quickkernel failed!" ; \ 557 exit 1; \ 558 fi; \ 559 fi 560.endfor 561 562bk_build_list: 563.if empty(BUILDKERNELS) 564 @echo ">>> ERROR: Missing kernel configuration file(s) (${KERNCONF})." 565 @echo ">>> Did you move your kernel configs from i386/conf to config/?" 566 @false 567.endif 568 569bk_kernwarn: 570.if defined(KERNWARN) 571 @echo "--------------------------------------------------------------" 572 @echo ">>> WARNING: KERNEL= setting should be changed to KERNCONF=" 573 @echo "--------------------------------------------------------------" 574 @sleep 3 575.endif 576 @echo 577 578# The buildkernel target rebuilds the specified kernels from scratch 579# using the crossbuild tools generated by the last buildworld. It is 580# the safest (but also the most time consuming) way to build a new kernel. 581# 582buildkernel: bk_tools bk_build_list bk_kernwarn 583.for _kernel in ${BUILDKERNELS} 584 @echo "--------------------------------------------------------------" 585 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 586 @echo "--------------------------------------------------------------" 587 @echo "===> ${_kernel}" 588.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 589 rm -rf ${KRNLOBJDIR}/${_kernel} 590.else 591 @if [ -f ${KRNLOBJDIR}/${_kernel}/.nativekernel_run ]; then \ 592 echo "YOU ARE REBUILDING WITH BUILDKERNEL, REMOVING OLD NATIVEKERNEL BUILD"; \ 593 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 594.endif 595 mkdir -p ${KRNLOBJDIR} 596.if !defined(NO_KERNELCONFIG) 597 cd ${KRNLCONFDIR}; \ 598 PATH=${STRICTTMPPATH} \ 599 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 600 ${KERNCONFDIR}/${_kernel} 601.endif 602.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 603 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 604.endif 605 touch ${KRNLOBJDIR}/${_kernel}/.buildkernel_run 606.if !defined(NO_KERNELDEPEND) 607 cd ${KRNLOBJDIR}/${_kernel}; \ 608 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} depend 609.endif 610 cd ${KRNLOBJDIR}/${_kernel}; \ 611 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 612 @echo "--------------------------------------------------------------" 613 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 614 @echo "--------------------------------------------------------------" 615.endfor 616 617# The nativekernel target rebuilds the specified kernels from scratch 618# using the system's standard compiler rather than using the crossbuild 619# tools generated by the last buildworld. This is fairly safe if your 620# system is reasonable up-to-date. 621# 622nativekernel: bk_build_list bk_kernwarn 623.for _kernel in ${BUILDKERNELS} 624 @echo "--------------------------------------------------------------" 625 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 626 @echo "--------------------------------------------------------------" 627 @echo "===> ${_kernel}" 628.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) 629 rm -rf ${KRNLOBJDIR}/${_kernel} 630.else 631 @if [ -f ${KRNLOBJDIR}/${_kernel}/.buildkernel_run ]; then \ 632 echo "YOU ARE REBUILDING WITH NATIVEKERNEL, REMOVING OLD BUILDKERNEL BUILD"; \ 633 rm -rf ${KRNLOBJDIR}/${_kernel}; fi 634.endif 635 mkdir -p ${KRNLOBJDIR} 636.if !defined(NO_KERNELCONFIG) 637 cd ${KRNLCONFDIR}; \ 638 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 639 ${KERNCONFDIR}/${_kernel} 640.endif 641.if !defined(NOCLEAN) && !defined(NO_KERNELCLEAN) && defined(KERNEL_VERSION_${_kernel}) 642 echo ${KERNEL_VERSION_${_kernel}} > ${KRNLOBJDIR}/${_kernel}/version 643.endif 644 touch ${KRNLOBJDIR}/${_kernel}/.nativekernel_run 645 cd ${KRNLOBJDIR}/${_kernel}; \ 646 MAKESRCPATH=${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm \ 647 ${MAKE} -DBOOTSTRAPPING -f ${KRNLSRCDIR}/dev/disk/aic7xxx/aicasm/Makefile 648.if !defined(NO_KERNELDEPEND) 649 cd ${KRNLOBJDIR}/${_kernel}; \ 650 ${MAKE} KERNEL=${INSTKERNNAME} depend 651.endif 652 cd ${KRNLOBJDIR}/${_kernel}; \ 653 ${MAKE} KERNEL=${INSTKERNNAME} all 654 @echo "--------------------------------------------------------------" 655 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 656 @echo "--------------------------------------------------------------" 657.endfor 658 659# The quickkernel target rebuilds the specified kernels as quickly 660# as possible. It will use the native tools or the buildworld cross tools 661# based on whether the kernel was originally generated via buildkernel or 662# nativekernel. Config is rerun but the object hierarchy is not rebuilt, 663# nor is the make depend step run. 664# 665quickkernel: maybe_bk_tools bk_build_list bk_kernwarn 666.for _kernel in ${BUILDKERNELS} 667 @echo "--------------------------------------------------------------" 668 @echo ">>> Kernel build for ${_kernel} started on `LC_ALL=C date`" 669 @echo "--------------------------------------------------------------" 670 @echo "===> ${_kernel}" 671.if exists(${KRNLOBJDIR}/${_kernel}/.buildkernel_run) 672.if !defined(NO_KERNELCONFIG) 673 cd ${KRNLCONFDIR}; \ 674 PATH=${STRICTTMPPATH} \ 675 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 676 ${KERNCONFDIR}/${_kernel} 677.endif 678 cd ${KRNLOBJDIR}/${_kernel}; \ 679 ${KMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} all 680.else 681.if !defined(NO_KERNELCONFIG) 682 cd ${KRNLCONFDIR}; \ 683 config ${CONFIGARGS} -d ${KRNLOBJDIR}/${_kernel} \ 684 ${KERNCONFDIR}/${_kernel} 685.endif 686 cd ${KRNLOBJDIR}/${_kernel}; \ 687 ${MAKE} KERNEL=${INSTKERNNAME} all 688.endif 689 @echo "--------------------------------------------------------------" 690 @echo ">>> Kernel build for ${_kernel} completed on `LC_ALL=C date`" 691 @echo "--------------------------------------------------------------" 692.endfor 693 694 695# installkernel 696# 697# Install the kernel defined by INSTALLKERNEL 698# 699installkernel reinstallkernel: 700 @echo "--------------------------------------------------------------" 701 @echo ">>> Kernel install for ${INSTALLKERNEL} started on `LC_ALL=C date`" 702 @echo "--------------------------------------------------------------" 703.if exists(${KRNLOBJDIR}/${INSTALLKERNEL}/.buildkernel_run) 704 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 705 ${IMAKEENV} ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 706.else 707 cd ${KRNLOBJDIR}/${INSTALLKERNEL}; \ 708 ${MAKE} KERNEL=${INSTKERNNAME} ${.TARGET:S/kernel$//} 709.endif 710 711# 712# most 713# 714# Build most of the user binaries on the existing system libs and includes. 715# 716most: 717 @echo "--------------------------------------------------------------" 718 @echo ">>> Building programs only" 719 @echo "--------------------------------------------------------------" 720.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 721 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ all 722.endfor 723 724# 725# installmost 726# 727# Install the binaries built by the 'most' target. This does not include 728# libraries or include files. 729# 730installmost: 731 @echo "--------------------------------------------------------------" 732 @echo ">>> Installing programs only" 733 @echo "--------------------------------------------------------------" 734.for _dir in bin sbin libexec usr.bin usr.sbin gnu/libexec gnu/usr.bin gnu/usr.sbin 735 cd ${.CURDIR}/${_dir}; ${MAKE} DIRPRFX=${_dir}/ install 736.endfor 737 738# 739# ------------------------------------------------------------------------ 740# 741# From here onwards are utility targets used by the 'make world' and 742# related targets. If your 'world' breaks, you may like to try to fix 743# the problem and manually run the following targets to attempt to 744# complete the build. Beware, this is *not* guaranteed to work, you 745# need to have a pretty good grip on the current state of the system 746# to attempt to manually finish it. If in doubt, 'make world' again. 747# 748 749# bootstrap-tools: Build all tools required to build all tools. Note that 750# order is important in a number of cases and also note that the bootstrap 751# and build tools stages have access to earlier binaries they themselves 752# had generated. 753# 754# patch: older patch's do not have -i. This program must be built 755# first so other bootstrap tools that need to apply patches 756# can use it. 757# [x]install: dependancies on various new install features 758# rpcgen: old rpcgen used a hardwired cpp path, newer OBJFORMAT_PATH 759# envs are not compatible with older objformat binaries. 760# 761.if exists(${.CURDIR}/games) && !defined(NO_GAMES) 762_strfile= games/fortune/strfile 763.endif 764 765bootstrap-tools: 766 ${LN} -fs /bin/date ${BTOOLSDEST}/bin/date 767.for _tool in ${_strfile} \ 768 usr.bin/patch \ 769 bin/chmod bin/cp bin/cpdup bin/dd bin/mkdir bin/rm bin/echo bin/test \ 770 bin/cat bin/ln bin/mv bin/csh bin/expr bin/sh \ 771 bin/hostname bin/kill \ 772 usr.bin/yacc usr.bin/colldef usr.bin/uudecode usr.bin/xinstall \ 773 usr.bin/m4 usr.bin/rpcgen usr.bin/make usr.bin/awk usr.bin/stat \ 774 usr.bin/find usr.bin/lex usr.bin/sed usr.bin/uname usr.bin/touch \ 775 usr.bin/mkdep usr.bin/mktemp usr.bin/lorder usr.bin/file2c \ 776 usr.bin/tsort usr.bin/tr usr.bin/join usr.bin/wc usr.bin/basename \ 777 usr.bin/gencat usr.bin/chflags usr.bin/expand usr.bin/paste \ 778 usr.bin/mklocale usr.bin/uuencode usr.bin/compile_et usr.bin/hexdump \ 779 usr.bin/cap_mkdb usr.bin/true usr.bin/false \ 780 usr.bin/cmp usr.bin/xargs usr.bin/id usr.bin/env usr.bin/dirname \ 781 usr.bin/tail usr.bin/unifdef \ 782 usr.sbin/chown usr.sbin/mtree usr.sbin/config \ 783 usr.sbin/btxld usr.sbin/zic usr.sbin/makewhatis \ 784 gnu/usr.bin/texinfo gnu/usr.bin/grep gnu/usr.bin/sort \ 785 usr.bin/gzip usr.bin/bzip2 usr.bin/mkcsmapper usr.bin/mkesdb 786 ${ECHODIR} "===> ${_tool} (bootstrap-tools)"; \ 787 cd ${.CURDIR}/${_tool}; \ 788 ${MAKE} DIRPRFX=${_tool}/ obj; \ 789 ${MAKE} DIRPRFX=${_tool}/ depend; \ 790 ${MAKE} DIRPRFX=${_tool}/ all; \ 791 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 792.endfor 793 touch ${BTOOLSDEST}/.bootstrap_done 794 795# build-tools: Build special purpose build tools. 796# 797# XXX we may be able to remove or consolidate this into bootstrap-tools 798# now that we have the native helper (.nx/.no) infrastructure. 799# 800.if exists(${.CURDIR}/share) && !defined(NO_SHARE) 801_share= share/syscons/scrnmaps 802.endif 803 804_gcc41_cross= gnu/usr.bin/cc41 805_gcc41_tools= gnu/usr.bin/cc41/cc_prep gnu/usr.bin/cc41/cc_tools 806.if !defined(NO_GCC44) 807_gcc44_cross= gnu/usr.bin/cc44 808_gcc44_tools= gnu/usr.bin/cc44/cc_prep gnu/usr.bin/cc44/cc_tools 809.endif 810_custom_cross= libexec/customcc 811_binutils= gnu/usr.bin/${WORLD_BINUTILSVER} 812 813build-tools: 814.for _tool in ${_gcc41_tools} ${_gcc44_tools} ${_libkrb5} ${_share} 815 ${ECHODIR} "===> ${_tool} (build-tools)"; \ 816 cd ${.CURDIR}/${_tool}; \ 817 ${MAKE} DIRPRFX=${_tool}/ obj; \ 818 ${MAKE} DIRPRFX=${_tool}/ depend; \ 819 ${MAKE} DIRPRFX=${_tool}/ all; \ 820 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${BTOOLSDEST} install 821.endfor 822 touch ${BTOOLSDEST}/.build_done 823 824# 825# cross-tools: Build cross-building tools 826# 827.if ${TARGET_ARCH} == "i386" && ${MACHINE_ARCH} != "i386" 828_btxld= usr.sbin/btxld 829.endif 830 831cross-tools: 832.for _tool in ${_btxld} ${_binutils} \ 833 usr.bin/objformat \ 834 ${_gcc41_cross} ${_gcc44_cross} ${_custom_cross} 835 ${ECHODIR} "===> ${_tool} (cross-tools)"; \ 836 cd ${.CURDIR}/${_tool}; \ 837 ${MAKE} DIRPRFX=${_tool}/ obj; \ 838 ${MAKE} DIRPRFX=${_tool}/ depend; \ 839 ${MAKE} DIRPRFX=${_tool}/ all; \ 840 ${MAKE} DIRPRFX=${_tool}/ DESTDIR=${CTOOLSDEST} install 841.endfor 842 touch ${CTOOLSDEST}/.cross_done 843 844# 845# hierarchy - ensure that all the needed directories are present 846# 847hierarchy: 848 cd ${.CURDIR}/etc; ${MAKE} distrib-dirs 849 850# 851# libraries - build all libraries, and install them under ${DESTDIR}. 852# 853# The list of libraries with dependents (${_prebuild_libs}) and their 854# interdependencies (__L) are built automatically by the 855# ${.CURDIR}/tools/make_libdeps.sh script. 856# 857# .makeenv does not work when bootstrapping from 4.x, so we must be sure 858# to specify the correct CCVER or 'cc' will not exec the correct compiler. 859# 860libraries: 861 cd ${.CURDIR}; \ 862 HOST_CCVER=${HOST_CCVER} CCVER=gcc41 \ 863 ${MAKE} -f Makefile.inc1 _startup_libs41; 864.if !defined(NO_GCC44) 865 cd ${.CURDIR}; \ 866 HOST_CCVER=${HOST_CCVER} CCVER=gcc44 \ 867 ${MAKE} -f Makefile.inc1 _startup_libs44; 868.endif 869 cd ${.CURDIR}; \ 870 ${MAKE} -f Makefile.inc1 _startup_libs; \ 871 ${MAKE} -f Makefile.inc1 _prebuild_libs; \ 872 ${MAKE} -f Makefile.inc1 _generic_libs; 873 touch ${WORLDDEST}/.libraries_done 874 875# These dependencies are not automatically generated: 876# 877# gnu/lib/${CCVER}/libgcc and gnu/lib/${CCVER}/csu must be built before all 878# shared libraries for ELF. The target for _startup_libsXX is 879# specifically built using gccXX. 880# 881_startup_libs41= gnu/lib/gcc41/csu gnu/lib/gcc41/libgcc 882_startup_libs44= gnu/lib/gcc44/csu gnu/lib/gcc44/libgcc 883_startup_libs= lib/csu lib/libc lib/libc_rtld 884 885_prebuild_libs= lib/libbz2 lib/libz 886_prebuild_libs+= lib/libutil 887 888_generic_libs= gnu/lib 889 890_prebuild_libs+= lib/libcom_err lib/libcrypt lib/libmd \ 891 lib/libncurses/libncurses lib/libopie lib/libradius \ 892 lib/libsbuf lib/libtacplus lib/libm \ 893 lib/libpam lib/libypclnt lib/lib${THREAD_LIB} 894 895lib/libopie__L lib/libradius__L lib/libtacplus__L: lib/libmd__L 896 897_generic_libs+= lib 898 899.if !defined(NO_CRYPT) 900.if !defined(NO_OPENSSL) 901_prebuild_libs+= secure/lib/libcrypto secure/lib/libssl 902.if !defined(NO_OPENSSH) 903_prebuild_libs+= secure/lib/libssh 904secure/lib/libssh__L: secure/lib/libcrypto__L lib/libz__L 905.endif 906.endif 907_generic_libs+= secure/lib 908.endif 909 910_generic_libs+= usr.bin/lex/lib 911 912.for _lib in ${_startup_libs41} ${_startup_libs44} \ 913 ${_startup_libs} ${_prebuild_libs} ${_generic_libs} 914${_lib}__L: .PHONY 915.if exists(${.CURDIR}/${_lib}) 916 ${ECHODIR} "===> ${_lib}"; \ 917 cd ${.CURDIR}/${_lib}; \ 918 ${MAKE} DIRPRFX=${_lib}/ depend; \ 919 ${MAKE} DIRPRFX=${_lib}/ all; \ 920 ${MAKE} DIRPRFX=${_lib}/ install 921.endif 922.endfor 923 924_startup_libs: ${_startup_libs:S/$/__L/} 925_startup_libs41: ${_startup_libs41:S/$/__L/} 926_startup_libs44: ${_startup_libs44:S/$/__L/} 927_prebuild_libs: ${_prebuild_libs:S/$/__L/} 928_generic_libs: ${_generic_libs:S/$/__L/} 929 930# library targets must be ordered because there are inter-library 931# races (e.g. generation of tconfig.h) 932# 933.ORDER: ${_startup_libs41:S/$/__L/} 934.ORDER: ${_startup_libs44:S/$/__L/} 935.ORDER: ${_startup_libs:S/$/__L/} 936.ORDER: ${_prebuild_libs:S/$/__L/} 937.ORDER: ${_generic_libs:S/$/__L/} 938 939.for __target in clean cleandepend cleandir obj depend includes 940.for entry in ${SUBDIR} 941${entry}.${__target}__D: .PHONY 942 @if test -d ${.CURDIR}/${entry}.${MACHINE_ARCH}; then \ 943 ${ECHODIR} "===> ${DIRPRFX}${entry}.${MACHINE_ARCH}"; \ 944 edir=${entry}.${MACHINE_ARCH}; \ 945 cd ${.CURDIR}/$${edir}; \ 946 else \ 947 ${ECHODIR} "===> ${DIRPRFX}${entry}"; \ 948 edir=${entry}; \ 949 cd ${.CURDIR}/$${edir}; \ 950 fi; \ 951 ${MAKE} ${__target} DIRPRFX=${DIRPRFX}$${edir}/ 952.endfor 953par-${__target}: ${SUBDIR:S/$/.${__target}__D/} 954.ORDER: ${SUBDIR:S/$/.${__target}__D/} 955.endfor 956.ORDER: par-clean par-cleandepend par-cleandir par-obj par-depend par-includes 957 958# The wmake target is used by /usr/bin/wmake to run make in a 959# world build environment. 960# 961wmake: 962 @echo '${WMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${WMAKE_ARGS}' 963 964wmakeenv: 965 @echo '${WMAKEENV} /bin/sh' 966 967bmake: 968 @echo '${BMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${BMAKE_ARGS}' 969 970bmakeenv: 971 @echo '${BMAKEENV} /bin/sh' 972 973tmake: 974 @echo '${TMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${TMAKE_ARGS}' 975 976tmakeenv: 977 @echo '${TMAKEENV} /bin/sh' 978 979xmake: 980 @echo '${XMAKEENV} ${MAKE} -m ${.CURDIR}/share/mk ${XMAKE_ARGS}' 981 982xmakeenv: 983 @echo '${XMAKEENV} /bin/sh' 984 985.include <bsd.subdir.mk> 986 987