1 /* 2 * Copyright (c) 1983, 1995 Eric P. Allman 3 * Copyright (c) 1988, 1993 4 * The Regents of the University of California. All rights reserved. 5 * 6 * %sccs.include.redist.c% 7 * 8 * @(#)sendmail.h 8.126 (Berkeley) 04/23/95 9 */ 10 11 /* 12 ** SENDMAIL.H -- Global definitions for sendmail. 13 */ 14 15 # ifdef _DEFINE 16 # define EXTERN 17 # ifndef lint 18 static char SmailSccsId[] = "@(#)sendmail.h 8.126 04/23/95"; 19 # endif 20 # else /* _DEFINE */ 21 # define EXTERN extern 22 # endif /* _DEFINE */ 23 24 # include <unistd.h> 25 # include <stddef.h> 26 # include <stdlib.h> 27 # include <stdio.h> 28 # include <ctype.h> 29 # include <setjmp.h> 30 # include <string.h> 31 # include <time.h> 32 # include <errno.h> 33 # ifdef EX_OK 34 # undef EX_OK /* for SVr4.2 SMP */ 35 # endif 36 # include <sysexits.h> 37 38 # include "conf.h" 39 # include "useful.h" 40 41 # ifdef LOG 42 # include <syslog.h> 43 # endif /* LOG */ 44 45 # ifdef DAEMON 46 # include <sys/socket.h> 47 # endif 48 # ifdef NETUNIX 49 # include <sys/un.h> 50 # endif 51 # ifdef NETINET 52 # include <netinet/in.h> 53 # endif 54 # ifdef NETISO 55 # include <netiso/iso.h> 56 # endif 57 # ifdef NETNS 58 # include <netns/ns.h> 59 # endif 60 # ifdef NETX25 61 # include <netccitt/x25.h> 62 # endif 63 64 65 66 67 /* 68 ** Data structure for bit maps. 69 ** 70 ** Each bit in this map can be referenced by an ascii character. 71 ** This is 256 possible bits, or 32 8-bit bytes. 72 */ 73 74 #define BITMAPBYTES 32 /* number of bytes in a bit map */ 75 #define BYTEBITS 8 /* number of bits in a byte */ 76 77 /* internal macros */ 78 #define _BITWORD(bit) ((bit) / (BYTEBITS * sizeof (int))) 79 #define _BITBIT(bit) (1 << ((bit) % (BYTEBITS * sizeof (int)))) 80 81 typedef int BITMAP[BITMAPBYTES / sizeof (int)]; 82 83 /* test bit number N */ 84 #define bitnset(bit, map) ((map)[_BITWORD(bit)] & _BITBIT(bit)) 85 86 /* set bit number N */ 87 #define setbitn(bit, map) (map)[_BITWORD(bit)] |= _BITBIT(bit) 88 89 /* clear bit number N */ 90 #define clrbitn(bit, map) (map)[_BITWORD(bit)] &= ~_BITBIT(bit) 91 92 /* clear an entire bit map */ 93 #define clrbitmap(map) bzero((char *) map, BITMAPBYTES) 94 /* 95 ** Address structure. 96 ** Addresses are stored internally in this structure. 97 */ 98 99 struct address 100 { 101 char *q_paddr; /* the printname for the address */ 102 char *q_user; /* user name */ 103 char *q_ruser; /* real user name, or NULL if q_user */ 104 char *q_host; /* host name */ 105 struct mailer *q_mailer; /* mailer to use */ 106 u_long q_flags; /* status flags, see below */ 107 uid_t q_uid; /* user-id of receiver (if known) */ 108 gid_t q_gid; /* group-id of receiver (if known) */ 109 char *q_home; /* home dir (local mailer only) */ 110 char *q_fullname; /* full name if known */ 111 struct address *q_next; /* chain */ 112 struct address *q_alias; /* address this results from */ 113 char *q_owner; /* owner of q_alias */ 114 struct address *q_tchain; /* temporary use chain */ 115 char *q_orcpt; /* ORCPT parameter from RCPT TO: line */ 116 char *q_status; /* status code for DSNs */ 117 char *q_fstatus; /* final status code for DSNs */ 118 char *q_rstatus; /* remote status message for DSNs */ 119 time_t q_statdate; /* date of status messages */ 120 char *q_statmta; /* MTA generating q_rstatus */ 121 short q_specificity; /* how "specific" this address is */ 122 }; 123 124 typedef struct address ADDRESS; 125 126 # define QDONTSEND 0x00000001 /* don't send to this address */ 127 # define QBADADDR 0x00000002 /* this address is verified bad */ 128 # define QGOODUID 0x00000004 /* the q_uid q_gid fields are good */ 129 # define QPRIMARY 0x00000008 /* set from RCPT or argv */ 130 # define QQUEUEUP 0x00000010 /* queue for later transmission */ 131 # define QSENT 0x00000020 /* has been successfully delivered */ 132 # define QNOTREMOTE 0x00000040 /* address not for remote forwarding */ 133 # define QSELFREF 0x00000080 /* this address references itself */ 134 # define QVERIFIED 0x00000100 /* verified, but not expanded */ 135 # define QREPORT 0x00000200 /* report this addr in return message */ 136 # define QBOGUSSHELL 0x00000400 /* user has no valid shell listed */ 137 # define QUNSAFEADDR 0x00000800 /* address aquired via unsafe path */ 138 # define QPINGONSUCCESS 0x00001000 /* give return on successful delivery */ 139 # define QPINGONFAILURE 0x00002000 /* give return on failure */ 140 # define QPINGONDELAY 0x00004000 /* give return on message delay */ 141 # define QHASNOTIFY 0x00008000 /* propogate notify parameter */ 142 # define QRELAYED 0x00010000 /* relayed to non-DSN aware mailer */ 143 # define QEXPLODED 0x00020000 /* undergone mailing list explosion */ 144 # define QTHISPASS 0x80000000 /* temp: address set this pass */ 145 146 # define NULLADDR ((ADDRESS *) NULL) 147 /* 148 ** Mailer definition structure. 149 ** Every mailer known to the system is declared in this 150 ** structure. It defines the pathname of the mailer, some 151 ** flags associated with it, and the argument vector to 152 ** pass to it. The flags are defined in conf.c 153 ** 154 ** The argument vector is expanded before actual use. All 155 ** words except the first are passed through the macro 156 ** processor. 157 */ 158 159 struct mailer 160 { 161 char *m_name; /* symbolic name of this mailer */ 162 char *m_mailer; /* pathname of the mailer to use */ 163 char *m_mtatype; /* type of this MTA */ 164 char *m_addrtype; /* type for addresses */ 165 char *m_diagtype; /* type for diagnostics */ 166 BITMAP m_flags; /* status flags, see below */ 167 short m_mno; /* mailer number internally */ 168 short m_nice; /* niceness to run at (mostly for prog) */ 169 char **m_argv; /* template argument vector */ 170 short m_sh_rwset; /* rewrite set: sender header addresses */ 171 short m_se_rwset; /* rewrite set: sender envelope addresses */ 172 short m_rh_rwset; /* rewrite set: recipient header addresses */ 173 short m_re_rwset; /* rewrite set: recipient envelope addresses */ 174 char *m_eol; /* end of line string */ 175 long m_maxsize; /* size limit on message to this mailer */ 176 int m_linelimit; /* max # characters per line */ 177 char *m_execdir; /* directory to chdir to before execv */ 178 uid_t m_uid; /* UID to run as */ 179 gid_t m_gid; /* GID to run as */ 180 char *m_defcharset; /* default character set */ 181 }; 182 183 typedef struct mailer MAILER; 184 185 /* bits for m_flags */ 186 # define M_ESMTP 'a' /* run Extended SMTP protocol */ 187 # define M_ALIASABLE 'A' /* user can be LHS of an alias */ 188 # define M_BLANKEND 'b' /* ensure blank line at end of message */ 189 # define M_NOCOMMENT 'c' /* don't include comment part of address */ 190 # define M_CANONICAL 'C' /* make addresses canonical "u@dom" */ 191 # define M_NOBRACKET 'd' /* never angle bracket envelope route-addrs */ 192 /* 'D' /* CF: include Date: */ 193 # define M_EXPENSIVE 'e' /* it costs to use this mailer.... */ 194 # define M_ESCFROM 'E' /* escape From lines to >From */ 195 # define M_FOPT 'f' /* mailer takes picky -f flag */ 196 /* 'F' /* CF: include From: or Resent-From: */ 197 # define M_NO_NULL_FROM 'g' /* sender of errors should be $g */ 198 # define M_HST_UPPER 'h' /* preserve host case distinction */ 199 # define M_PREHEAD 'H' /* MAIL11V3: preview headers */ 200 # define M_UDBENVELOPE 'i' /* do udbsender rewriting on envelope */ 201 # define M_INTERNAL 'I' /* SMTP to another sendmail site */ 202 # define M_UDBRECIPIENT 'j' /* do udbsender rewriting on recipient lines */ 203 # define M_NOLOOPCHECK 'k' /* don't check for loops in HELO command */ 204 # define M_LOCALMAILER 'l' /* delivery is to this host */ 205 # define M_LIMITS 'L' /* must enforce SMTP line limits */ 206 # define M_MUSER 'm' /* can handle multiple users at once */ 207 /* 'M' /* CF: include Message-Id: */ 208 # define M_NHDR 'n' /* don't insert From line */ 209 # define M_MANYSTATUS 'N' /* MAIL11V3: DATA returns multi-status */ 210 # define M_RUNASRCPT 'o' /* always run mailer as recipient */ 211 # define M_FROMPATH 'p' /* use reverse-path in MAIL FROM: */ 212 /* 'P' /* CF: include Return-Path: */ 213 # define M_ROPT 'r' /* mailer takes picky -r flag */ 214 # define M_SECURE_PORT 'R' /* try to send on a reserved TCP port */ 215 # define M_STRIPQ 's' /* strip quote chars from user/host */ 216 # define M_SPECIFIC_UID 'S' /* run as specific uid/gid */ 217 # define M_USR_UPPER 'u' /* preserve user case distinction */ 218 # define M_UGLYUUCP 'U' /* this wants an ugly UUCP from line */ 219 # define M_CONTENT_LEN 'v' /* add Content-Length: header (SVr4) */ 220 /* 'V' /* UIUC: !-relativize all addresses */ 221 # define M_HASPWENT 'w' /* check for /etc/passwd entry */ 222 /* 'x' /* CF: include Full-Name: */ 223 # define M_XDOT 'X' /* use hidden-dot algorithm */ 224 # define M_EBCDIC '3' /* extend Q-P encoding for EBCDIC */ 225 # define M_TRYRULESET5 '5' /* use ruleset 5 after local aliasing */ 226 # define M_7BITS '7' /* use 7-bit path */ 227 # define M_8BITS '8' /* force "just send 8" behaviour */ 228 # define M_CHECKINCLUDE ':' /* check for :include: files */ 229 # define M_CHECKPROG '|' /* check for |program addresses */ 230 # define M_CHECKFILE '/' /* check for /file addresses */ 231 # define M_CHECKUDB '@' /* user can be user database key */ 232 233 EXTERN MAILER *Mailer[MAXMAILERS+1]; 234 235 EXTERN MAILER *LocalMailer; /* ptr to local mailer */ 236 EXTERN MAILER *ProgMailer; /* ptr to program mailer */ 237 EXTERN MAILER *FileMailer; /* ptr to *file* mailer */ 238 EXTERN MAILER *InclMailer; /* ptr to *include* mailer */ 239 /* 240 ** Header structure. 241 ** This structure is used internally to store header items. 242 */ 243 244 struct header 245 { 246 char *h_field; /* the name of the field */ 247 char *h_value; /* the value of that field */ 248 struct header *h_link; /* the next header */ 249 u_short h_flags; /* status bits, see below */ 250 BITMAP h_mflags; /* m_flags bits needed */ 251 }; 252 253 typedef struct header HDR; 254 255 /* 256 ** Header information structure. 257 ** Defined in conf.c, this struct declares the header fields 258 ** that have some magic meaning. 259 */ 260 261 struct hdrinfo 262 { 263 char *hi_field; /* the name of the field */ 264 u_short hi_flags; /* status bits, see below */ 265 }; 266 267 extern struct hdrinfo HdrInfo[]; 268 269 /* bits for h_flags and hi_flags */ 270 # define H_EOH 0x0001 /* this field terminates header */ 271 # define H_RCPT 0x0002 /* contains recipient addresses */ 272 # define H_DEFAULT 0x0004 /* if another value is found, drop this */ 273 # define H_RESENT 0x0008 /* this address is a "Resent-..." address */ 274 # define H_CHECK 0x0010 /* check h_mflags against m_flags */ 275 # define H_ACHECK 0x0020 /* ditto, but always (not just default) */ 276 # define H_FORCE 0x0040 /* force this field, even if default */ 277 # define H_TRACE 0x0080 /* this field contains trace information */ 278 # define H_FROM 0x0100 /* this is a from-type field */ 279 # define H_VALID 0x0200 /* this field has a validated value */ 280 # define H_RECEIPTTO 0x0400 /* this field has return receipt info */ 281 # define H_ERRORSTO 0x0800 /* this field has error address info */ 282 # define H_CTE 0x1000 /* this field is a content-transfer-encoding */ 283 # define H_CTYPE 0x2000 /* this is a content-type field */ 284 # define H_STRIPVAL 0x4000 /* strip value from header (Bcc:) */ 285 /* 286 ** Information about currently open connections to mailers, or to 287 ** hosts that we have looked up recently. 288 */ 289 290 # define MCI struct mailer_con_info 291 292 MCI 293 { 294 short mci_flags; /* flag bits, see below */ 295 short mci_errno; /* error number on last connection */ 296 short mci_herrno; /* h_errno from last DNS lookup */ 297 short mci_exitstat; /* exit status from last connection */ 298 short mci_state; /* SMTP state */ 299 long mci_maxsize; /* max size this server will accept */ 300 FILE *mci_in; /* input side of connection */ 301 FILE *mci_out; /* output side of connection */ 302 int mci_pid; /* process id of subordinate proc */ 303 char *mci_phase; /* SMTP phase string */ 304 struct mailer *mci_mailer; /* ptr to the mailer for this conn */ 305 char *mci_host; /* host name */ 306 char *mci_status; /* DSN status to be copied to addrs */ 307 time_t mci_lastuse; /* last usage time */ 308 }; 309 310 311 /* flag bits */ 312 #define MCIF_VALID 0x0001 /* this entry is valid */ 313 #define MCIF_TEMP 0x0002 /* don't cache this connection */ 314 #define MCIF_CACHED 0x0004 /* currently in open cache */ 315 #define MCIF_ESMTP 0x0008 /* this host speaks ESMTP */ 316 #define MCIF_EXPN 0x0010 /* EXPN command supported */ 317 #define MCIF_SIZE 0x0020 /* SIZE option supported */ 318 #define MCIF_8BITMIME 0x0040 /* BODY=8BITMIME supported */ 319 #define MCIF_7BIT 0x0080 /* strip this message to 7 bits */ 320 #define MCIF_MULTSTAT 0x0100 /* MAIL11V3: handles MULT status */ 321 #define MCIF_INHEADER 0x0200 /* currently outputing header */ 322 #define MCIF_CVT8TO7 0x0400 /* convert from 8 to 7 bits */ 323 #define MCIF_DSN 0x0800 /* DSN extension supported */ 324 #define MCIF_8BITOK 0x1000 /* OK to send 8 bit characters */ 325 326 /* states */ 327 #define MCIS_CLOSED 0 /* no traffic on this connection */ 328 #define MCIS_OPENING 1 /* sending initial protocol */ 329 #define MCIS_OPEN 2 /* open, initial protocol sent */ 330 #define MCIS_ACTIVE 3 /* message being sent */ 331 #define MCIS_QUITING 4 /* running quit protocol */ 332 #define MCIS_SSD 5 /* service shutting down */ 333 #define MCIS_ERROR 6 /* I/O error on connection */ 334 /* 335 ** Envelope structure. 336 ** This structure defines the message itself. There is usually 337 ** only one of these -- for the message that we originally read 338 ** and which is our primary interest -- but other envelopes can 339 ** be generated during processing. For example, error messages 340 ** will have their own envelope. 341 */ 342 343 # define ENVELOPE struct envelope 344 345 ENVELOPE 346 { 347 HDR *e_header; /* head of header list */ 348 long e_msgpriority; /* adjusted priority of this message */ 349 time_t e_ctime; /* time message appeared in the queue */ 350 char *e_to; /* the target person */ 351 char *e_receiptto; /* return receipt address */ 352 ADDRESS e_from; /* the person it is from */ 353 char *e_sender; /* e_from.q_paddr w comments stripped */ 354 char **e_fromdomain; /* the domain part of the sender */ 355 ADDRESS *e_sendqueue; /* list of message recipients */ 356 ADDRESS *e_errorqueue; /* the queue for error responses */ 357 long e_msgsize; /* size of the message in bytes */ 358 long e_flags; /* flags, see below */ 359 int e_nrcpts; /* number of recipients */ 360 short e_class; /* msg class (priority, junk, etc.) */ 361 short e_hopcount; /* number of times processed */ 362 short e_nsent; /* number of sends since checkpoint */ 363 short e_sendmode; /* message send mode */ 364 short e_errormode; /* error return mode */ 365 short e_timeoutclass; /* message timeout class */ 366 int (*e_puthdr)__P((MCI *, HDR *, ENVELOPE *)); 367 /* function to put header of message */ 368 int (*e_putbody)__P((MCI *, ENVELOPE *, char *)); 369 /* function to put body of message */ 370 struct envelope *e_parent; /* the message this one encloses */ 371 struct envelope *e_sibling; /* the next envelope of interest */ 372 char *e_bodytype; /* type of message body */ 373 FILE *e_dfp; /* temporary file */ 374 char *e_id; /* code for this entry in queue */ 375 FILE *e_xfp; /* transcript file */ 376 FILE *e_lockfp; /* the lock file for this message */ 377 char *e_message; /* error message */ 378 char *e_statmsg; /* stat msg (changes per delivery) */ 379 char *e_msgboundary; /* MIME-style message part boundary */ 380 char *e_origrcpt; /* original recipient (one only) */ 381 char *e_envid; /* envelope id from MAIL FROM: line */ 382 char *e_status; /* DSN status for this message */ 383 time_t e_dtime; /* time of last delivery attempt */ 384 int e_ntries; /* number of delivery attempts */ 385 dev_t e_dfdev; /* df file's device, for crash recov */ 386 ino_t e_dfino; /* df file's ino, for crash recovery */ 387 char *e_macro[256]; /* macro definitions */ 388 }; 389 390 /* values for e_flags */ 391 #define EF_OLDSTYLE 0x0000001 /* use spaces (not commas) in hdrs */ 392 #define EF_INQUEUE 0x0000002 /* this message is fully queued */ 393 #define EF_NO_BODY_RETN 0x0000004 /* omit message body on error */ 394 #define EF_CLRQUEUE 0x0000008 /* disk copy is no longer needed */ 395 #define EF_SENDRECEIPT 0x0000010 /* send a return receipt */ 396 #define EF_FATALERRS 0x0000020 /* fatal errors occured */ 397 #define EF_KEEPQUEUE 0x0000040 /* keep queue files always */ 398 #define EF_RESPONSE 0x0000080 /* this is an error or return receipt */ 399 #define EF_RESENT 0x0000100 /* this message is being forwarded */ 400 #define EF_VRFYONLY 0x0000200 /* verify only (don't expand aliases) */ 401 #define EF_WARNING 0x0000400 /* warning message has been sent */ 402 #define EF_QUEUERUN 0x0000800 /* this envelope is from queue */ 403 #define EF_GLOBALERRS 0x0001000 /* treat errors as global */ 404 #define EF_PM_NOTIFY 0x0002000 /* send return mail to postmaster */ 405 #define EF_METOO 0x0004000 /* send to me too */ 406 #define EF_LOGSENDER 0x0008000 /* need to log the sender */ 407 #define EF_NORECEIPT 0x0010000 /* suppress all return-receipts */ 408 #define EF_HAS8BIT 0x0020000 /* at least one 8-bit char in body */ 409 #define EF_NL_NOT_EOL 0x0040000 /* don't accept raw NL as EOLine */ 410 #define EF_CRLF_NOT_EOL 0x0080000 /* don't accept CR-LF as EOLine */ 411 #define EF_RET_PARAM 0x0100000 /* RCPT command had RET argument */ 412 #define EF_HAS_DF 0x0200000 /* set when df file is instantiated */ 413 414 EXTERN ENVELOPE *CurEnv; /* envelope currently being processed */ 415 /* 416 ** Message priority classes. 417 ** 418 ** The message class is read directly from the Priority: header 419 ** field in the message. 420 ** 421 ** CurEnv->e_msgpriority is the number of bytes in the message plus 422 ** the creation time (so that jobs ``tend'' to be ordered correctly), 423 ** adjusted by the message class, the number of recipients, and the 424 ** amount of time the message has been sitting around. This number 425 ** is used to order the queue. Higher values mean LOWER priority. 426 ** 427 ** Each priority class point is worth WkClassFact priority points; 428 ** each recipient is worth WkRecipFact priority points. Each time 429 ** we reprocess a message the priority is adjusted by WkTimeFact. 430 ** WkTimeFact should normally decrease the priority so that jobs 431 ** that have historically failed will be run later; thanks go to 432 ** Jay Lepreau at Utah for pointing out the error in my thinking. 433 ** 434 ** The "class" is this number, unadjusted by the age or size of 435 ** this message. Classes with negative representations will have 436 ** error messages thrown away if they are not local. 437 */ 438 439 struct priority 440 { 441 char *pri_name; /* external name of priority */ 442 int pri_val; /* internal value for same */ 443 }; 444 445 EXTERN struct priority Priorities[MAXPRIORITIES]; 446 EXTERN int NumPriorities; /* pointer into Priorities */ 447 /* 448 ** Rewrite rules. 449 */ 450 451 struct rewrite 452 { 453 char **r_lhs; /* pattern match */ 454 char **r_rhs; /* substitution value */ 455 struct rewrite *r_next;/* next in chain */ 456 }; 457 458 EXTERN struct rewrite *RewriteRules[MAXRWSETS]; 459 460 /* 461 ** Special characters in rewriting rules. 462 ** These are used internally only. 463 ** The COND* rules are actually used in macros rather than in 464 ** rewriting rules, but are given here because they 465 ** cannot conflict. 466 */ 467 468 /* left hand side items */ 469 # define MATCHZANY ((u_char)0220) /* match zero or more tokens */ 470 # define MATCHANY ((u_char)0221) /* match one or more tokens */ 471 # define MATCHONE ((u_char)0222) /* match exactly one token */ 472 # define MATCHCLASS ((u_char)0223) /* match one token in a class */ 473 # define MATCHNCLASS ((u_char)0224) /* match anything not in class */ 474 # define MATCHREPL ((u_char)0225) /* replacement on RHS for above */ 475 476 /* right hand side items */ 477 # define CANONNET ((u_char)0226) /* canonical net, next token */ 478 # define CANONHOST ((u_char)0227) /* canonical host, next token */ 479 # define CANONUSER ((u_char)0230) /* canonical user, next N tokens */ 480 # define CALLSUBR ((u_char)0231) /* call another rewriting set */ 481 482 /* conditionals in macros */ 483 # define CONDIF ((u_char)0232) /* conditional if-then */ 484 # define CONDELSE ((u_char)0233) /* conditional else */ 485 # define CONDFI ((u_char)0234) /* conditional fi */ 486 487 /* bracket characters for host name lookup */ 488 # define HOSTBEGIN ((u_char)0235) /* hostname lookup begin */ 489 # define HOSTEND ((u_char)0236) /* hostname lookup end */ 490 491 /* bracket characters for generalized lookup */ 492 # define LOOKUPBEGIN ((u_char)0205) /* generalized lookup begin */ 493 # define LOOKUPEND ((u_char)0206) /* generalized lookup end */ 494 495 /* macro substitution character */ 496 # define MACROEXPAND ((u_char)0201) /* macro expansion */ 497 # define MACRODEXPAND ((u_char)0202) /* deferred macro expansion */ 498 499 /* to make the code clearer */ 500 # define MATCHZERO CANONHOST 501 502 /* external <==> internal mapping table */ 503 struct metamac 504 { 505 char metaname; /* external code (after $) */ 506 u_char metaval; /* internal code (as above) */ 507 }; 508 /* 509 ** Name canonification short circuit. 510 ** 511 ** If the name server for a host is down, the process of trying to 512 ** canonify the name can hang. This is similar to (but alas, not 513 ** identical to) looking up the name for delivery. This stab type 514 ** caches the result of the name server lookup so we don't hang 515 ** multiple times. 516 */ 517 518 #define NAMECANON struct _namecanon 519 520 NAMECANON 521 { 522 short nc_errno; /* cached errno */ 523 short nc_herrno; /* cached h_errno */ 524 short nc_stat; /* cached exit status code */ 525 short nc_flags; /* flag bits */ 526 char *nc_cname; /* the canonical name */ 527 }; 528 529 /* values for nc_flags */ 530 #define NCF_VALID 0x0001 /* entry valid */ 531 /* 532 ** Mapping functions 533 ** 534 ** These allow arbitrary mappings in the config file. The idea 535 ** (albeit not the implementation) comes from IDA sendmail. 536 */ 537 538 # define MAPCLASS struct _mapclass 539 # define MAP struct _map 540 # define MAXMAPACTIONS 3 /* size of map_actions array */ 541 542 543 /* 544 ** An actual map. 545 */ 546 547 MAP 548 { 549 MAPCLASS *map_class; /* the class of this map */ 550 char *map_mname; /* name of this map */ 551 long map_mflags; /* flags, see below */ 552 char *map_file; /* the (nominal) filename */ 553 ARBPTR_T map_db1; /* the open database ptr */ 554 ARBPTR_T map_db2; /* an "extra" database pointer */ 555 char *map_keycolnm; /* key column name */ 556 char *map_valcolnm; /* value column name */ 557 u_char map_keycolno; /* key column number */ 558 u_char map_valcolno; /* value column number */ 559 char map_coldelim; /* column delimiter */ 560 char *map_app; /* to append to successful matches */ 561 char *map_domain; /* the (nominal) NIS domain */ 562 char *map_rebuild; /* program to run to do auto-rebuild */ 563 time_t map_mtime; /* last database modification time */ 564 short map_specificity; /* specificity of alaases */ 565 MAP *map_stack[MAXMAPSTACK]; /* list for stacked maps */ 566 short map_return[MAXMAPACTIONS]; /* return bitmaps for stacked maps */ 567 }; 568 569 /* bit values for map_mflags */ 570 # define MF_VALID 0x00000001 /* this entry is valid */ 571 # define MF_INCLNULL 0x00000002 /* include null byte in key */ 572 # define MF_OPTIONAL 0x00000004 /* don't complain if map not found */ 573 # define MF_NOFOLDCASE 0x00000008 /* don't fold case in keys */ 574 # define MF_MATCHONLY 0x00000010 /* don't use the map value */ 575 # define MF_OPEN 0x00000020 /* this entry is open */ 576 # define MF_WRITABLE 0x00000040 /* open for writing */ 577 # define MF_ALIAS 0x00000080 /* this is an alias file */ 578 # define MF_TRY0NULL 0x00000100 /* try with no null byte */ 579 # define MF_TRY1NULL 0x00000200 /* try with the null byte */ 580 # define MF_LOCKED 0x00000400 /* this map is currently locked */ 581 # define MF_ALIASWAIT 0x00000800 /* alias map in aliaswait state */ 582 # define MF_IMPL_HASH 0x00001000 /* implicit: underlying hash database */ 583 # define MF_IMPL_NDBM 0x00002000 /* implicit: underlying NDBM database */ 584 # define MF_UNSAFEDB 0x00004000 /* this map is world writable */ 585 # define MF_APPEND 0x00008000 /* append new entry on rebuiled */ 586 587 /* indices for map_actions */ 588 # define MA_NOTFOUND 0 /* member map returned "not found" */ 589 # define MA_UNAVAIL 1 /* member map is not available */ 590 # define MA_TRYAGAIN 2 /* member map returns temp failure */ 591 592 /* 593 ** The class of a map -- essentially the functions to call 594 */ 595 596 MAPCLASS 597 { 598 char *map_cname; /* name of this map class */ 599 char *map_ext; /* extension for database file */ 600 short map_cflags; /* flag bits, see below */ 601 bool (*map_parse)__P((MAP *, char *)); 602 /* argument parsing function */ 603 char *(*map_lookup)__P((MAP *, char *, char **, int *)); 604 /* lookup function */ 605 void (*map_store)__P((MAP *, char *, char *)); 606 /* store function */ 607 bool (*map_open)__P((MAP *, int)); 608 /* open function */ 609 void (*map_close)__P((MAP *)); 610 /* close function */ 611 }; 612 613 /* bit values for map_cflags */ 614 #define MCF_ALIASOK 0x0001 /* can be used for aliases */ 615 #define MCF_ALIASONLY 0x0002 /* usable only for aliases */ 616 #define MCF_REBUILDABLE 0x0004 /* can rebuild alias files */ 617 #define MCF_OPTFILE 0x0008 /* file name is optional */ 618 /* 619 ** Symbol table definitions 620 */ 621 622 struct symtab 623 { 624 char *s_name; /* name to be entered */ 625 char s_type; /* general type (see below) */ 626 struct symtab *s_next; /* pointer to next in chain */ 627 union 628 { 629 BITMAP sv_class; /* bit-map of word classes */ 630 ADDRESS *sv_addr; /* pointer to address header */ 631 MAILER *sv_mailer; /* pointer to mailer */ 632 char *sv_alias; /* alias */ 633 MAPCLASS sv_mapclass; /* mapping function class */ 634 MAP sv_map; /* mapping function */ 635 char *sv_hostsig; /* host signature */ 636 MCI sv_mci; /* mailer connection info */ 637 NAMECANON sv_namecanon; /* canonical name cache */ 638 int sv_macro; /* macro name => id mapping */ 639 int sv_ruleset; /* ruleset index */ 640 } s_value; 641 }; 642 643 typedef struct symtab STAB; 644 645 /* symbol types */ 646 # define ST_UNDEF 0 /* undefined type */ 647 # define ST_CLASS 1 /* class map */ 648 # define ST_ADDRESS 2 /* an address in parsed format */ 649 # define ST_MAILER 3 /* a mailer header */ 650 # define ST_ALIAS 4 /* an alias */ 651 # define ST_MAPCLASS 5 /* mapping function class */ 652 # define ST_MAP 6 /* mapping function */ 653 # define ST_HOSTSIG 7 /* host signature */ 654 # define ST_NAMECANON 8 /* cached canonical name */ 655 # define ST_MACRO 9 /* macro name to id mapping */ 656 # define ST_RULESET 10 /* ruleset index */ 657 # define ST_MCI 16 /* mailer connection info (offset) */ 658 659 # define s_class s_value.sv_class 660 # define s_address s_value.sv_addr 661 # define s_mailer s_value.sv_mailer 662 # define s_alias s_value.sv_alias 663 # define s_mci s_value.sv_mci 664 # define s_mapclass s_value.sv_mapclass 665 # define s_hostsig s_value.sv_hostsig 666 # define s_map s_value.sv_map 667 # define s_namecanon s_value.sv_namecanon 668 # define s_macro s_value.sv_macro 669 # define s_ruleset s_value.sv_ruleset 670 671 extern STAB *stab __P((char *, int, int)); 672 extern void stabapply __P((void (*)(STAB *, int), int)); 673 674 /* opcodes to stab */ 675 # define ST_FIND 0 /* find entry */ 676 # define ST_ENTER 1 /* enter if not there */ 677 /* 678 ** STRUCT EVENT -- event queue. 679 ** 680 ** Maintained in sorted order. 681 ** 682 ** We store the pid of the process that set this event to insure 683 ** that when we fork we will not take events intended for the parent. 684 */ 685 686 struct event 687 { 688 time_t ev_time; /* time of the function call */ 689 void (*ev_func)__P((int)); 690 /* function to call */ 691 int ev_arg; /* argument to ev_func */ 692 int ev_pid; /* pid that set this event */ 693 struct event *ev_link; /* link to next item */ 694 }; 695 696 typedef struct event EVENT; 697 698 EXTERN EVENT *EventQueue; /* head of event queue */ 699 /* 700 ** Operation, send, error, and MIME modes 701 ** 702 ** The operation mode describes the basic operation of sendmail. 703 ** This can be set from the command line, and is "send mail" by 704 ** default. 705 ** 706 ** The send mode tells how to send mail. It can be set in the 707 ** configuration file. It's setting determines how quickly the 708 ** mail will be delivered versus the load on your system. If the 709 ** -v (verbose) flag is given, it will be forced to SM_DELIVER 710 ** mode. 711 ** 712 ** The error mode tells how to return errors. 713 */ 714 715 EXTERN char OpMode; /* operation mode, see below */ 716 717 #define MD_DELIVER 'm' /* be a mail sender */ 718 #define MD_SMTP 's' /* run SMTP on standard input */ 719 #define MD_ARPAFTP 'a' /* obsolete ARPANET mode (Grey Book) */ 720 #define MD_DAEMON 'd' /* run as a daemon */ 721 #define MD_VERIFY 'v' /* verify: don't collect or deliver */ 722 #define MD_TEST 't' /* test mode: resolve addrs only */ 723 #define MD_INITALIAS 'i' /* initialize alias database */ 724 #define MD_PRINT 'p' /* print the queue */ 725 #define MD_FREEZE 'z' /* freeze the configuration file */ 726 727 728 /* values for e_sendmode -- send modes */ 729 #define SM_DELIVER 'i' /* interactive delivery */ 730 #define SM_FORK 'b' /* deliver in background */ 731 #define SM_QUEUE 'q' /* queue, don't deliver */ 732 #define SM_VERIFY 'v' /* verify only (used internally) */ 733 734 /* used only as a parameter to sendall */ 735 #define SM_DEFAULT '\0' /* unspecified, use SendMode */ 736 737 738 /* values for e_errormode -- error handling modes */ 739 #define EM_PRINT 'p' /* print errors */ 740 #define EM_MAIL 'm' /* mail back errors */ 741 #define EM_WRITE 'w' /* write back errors */ 742 #define EM_BERKNET 'e' /* special berknet processing */ 743 #define EM_QUIET 'q' /* don't print messages (stat only) */ 744 745 746 /* MIME processing mode */ 747 EXTERN int MimeMode; 748 749 /* bit values for MimeMode */ 750 #define MM_CVTMIME 0x0001 /* convert 8 to 7 bit MIME */ 751 #define MM_PASS8BIT 0x0002 /* just send 8 bit data blind */ 752 #define MM_MIME8BIT 0x0004 /* convert 8-bit data to MIME */ 753 754 /* queue sorting order algorithm */ 755 EXTERN int QueueSortOrder; 756 757 #define QS_BYPRIORITY 0 /* sort by message priority */ 758 #define QS_BYHOST 1 /* sort by first host name */ 759 760 761 /* how to handle messages without any recipient addresses */ 762 EXTERN int NoRecipientAction; 763 764 #define NRA_NO_ACTION 0 /* just leave it as is */ 765 #define NRA_ADD_TO 1 /* add To: header */ 766 #define NRA_ADD_APPARENTLY_TO 2 /* add Apparently-To: header */ 767 #define NRA_ADD_BCC 3 /* add empty Bcc: header */ 768 #define NRA_ADD_TO_UNDISCLOSED 4 /* add To: undisclosed:; header */ 769 770 771 /* flags to putxline */ 772 #define PXLF_NOTHINGSPECIAL 0 /* no special mapping */ 773 #define PXLF_MAPFROM 0x0001 /* map From_ to >From_ */ 774 #define PXLF_STRIP8BIT 0x0002 /* strip 8th bit *e 775 /* 776 ** Additional definitions 777 */ 778 779 780 /* 781 ** Privacy flags 782 ** These are bit values for the PrivacyFlags word. 783 */ 784 785 #define PRIV_PUBLIC 0 /* what have I got to hide? */ 786 #define PRIV_NEEDMAILHELO 0x0001 /* insist on HELO for MAIL, at least */ 787 #define PRIV_NEEDEXPNHELO 0x0002 /* insist on HELO for EXPN */ 788 #define PRIV_NEEDVRFYHELO 0x0004 /* insist on HELO for VRFY */ 789 #define PRIV_NOEXPN 0x0008 /* disallow EXPN command entirely */ 790 #define PRIV_NOVRFY 0x0010 /* disallow VRFY command entirely */ 791 #define PRIV_AUTHWARNINGS 0x0020 /* flag possible authorization probs */ 792 #define PRIV_NORECEIPTS 0x0040 /* disallow return receipts */ 793 #define PRIV_RESTRICTMAILQ 0x1000 /* restrict mailq command */ 794 #define PRIV_RESTRICTQRUN 0x2000 /* restrict queue run */ 795 #define PRIV_GOAWAY 0x0fff /* don't give no info, anyway, anyhow */ 796 797 /* struct defining such things */ 798 struct prival 799 { 800 char *pv_name; /* name of privacy flag */ 801 int pv_flag; /* numeric level */ 802 }; 803 804 805 /* 806 ** Flags passed to remotename, parseaddr, allocaddr, and buildaddr. 807 */ 808 809 #define RF_SENDERADDR 0x001 /* this is a sender address */ 810 #define RF_HEADERADDR 0x002 /* this is a header address */ 811 #define RF_CANONICAL 0x004 /* strip comment information */ 812 #define RF_ADDDOMAIN 0x008 /* OK to do domain extension */ 813 #define RF_COPYPARSE 0x010 /* copy parsed user & host */ 814 #define RF_COPYPADDR 0x020 /* copy print address */ 815 #define RF_COPYALL (RF_COPYPARSE|RF_COPYPADDR) 816 #define RF_COPYNONE 0 817 818 819 /* 820 ** Flags passed to safefile. 821 */ 822 823 #define SFF_ANYFILE 0 /* no special restrictions */ 824 #define SFF_MUSTOWN 0x0001 /* user must own this file */ 825 #define SFF_NOSLINK 0x0002 /* file cannot be a symbolic link */ 826 #define SFF_ROOTOK 0x0004 /* ok for root to own this file */ 827 #define SFF_RUNASREALUID 0x0008 /* if no ctladdr, run as real uid */ 828 #define SFF_NOPATHCHECK 0x0010 /* don't bother checking dir path */ 829 #define SFF_SETUIDOK 0x0020 /* setuid files are ok */ 830 #define SFF_CREAT 0x0040 /* ok to create file if necessary */ 831 #define SFF_REGONLY 0x0080 /* regular files only */ 832 833 /* flags that are actually specific to safefopen */ 834 #define SFF_OPENASROOT 0x1000 /* open as root instead of real user */ 835 836 837 /* 838 ** Flags passed to mime8to7. 839 */ 840 841 #define M87F_OUTER 0 /* outer context */ 842 #define M87F_NO8BIT 0x0001 /* can't have 8-bit in this section */ 843 #define M87F_DIGEST 0x0002 /* processing multipart/digest */ 844 845 846 /* 847 ** Regular UNIX sockaddrs are too small to handle ISO addresses, so 848 ** we are forced to declare a supertype here. 849 */ 850 851 union bigsockaddr 852 { 853 struct sockaddr sa; /* general version */ 854 #ifdef NETUNIX 855 struct sockaddr_un sunix; /* UNIX family */ 856 #endif 857 #ifdef NETINET 858 struct sockaddr_in sin; /* INET family */ 859 #endif 860 #ifdef NETISO 861 struct sockaddr_iso siso; /* ISO family */ 862 #endif 863 #ifdef NETNS 864 struct sockaddr_ns sns; /* XNS family */ 865 #endif 866 #ifdef NETX25 867 struct sockaddr_x25 sx25; /* X.25 family */ 868 #endif 869 }; 870 871 #define SOCKADDR union bigsockaddr 872 873 874 /* 875 ** Vendor codes 876 ** 877 ** Vendors can customize sendmail to add special behaviour, 878 ** generally for back compatibility. Ideally, this should 879 ** be set up in the .cf file using the "V" command. However, 880 ** it's quite reasonable for some vendors to want the default 881 ** be their old version; this can be set using 882 ** -DVENDOR_DEFAULT=VENDOR_xxx 883 ** in the Makefile. 884 ** 885 ** Vendors should apply to sendmail@CS.Berkeley.EDU for 886 ** unique vendor codes. 887 */ 888 889 #define VENDOR_BERKELEY 1 /* Berkeley-native configuration file */ 890 #define VENDOR_SUN 2 /* Sun-native configuration file */ 891 892 EXTERN int VendorCode; /* vendor-specific operation enhancements */ 893 /* 894 ** Global variables. 895 */ 896 897 EXTERN bool FromFlag; /* if set, "From" person is explicit */ 898 EXTERN bool MeToo; /* send to the sender also */ 899 EXTERN bool IgnrDot; /* don't let dot end messages */ 900 EXTERN bool SaveFrom; /* save leading "From" lines */ 901 EXTERN bool Verbose; /* set if blow-by-blow desired */ 902 EXTERN bool GrabTo; /* if set, get recipients from msg */ 903 EXTERN bool SuprErrs; /* set if we are suppressing errors */ 904 EXTERN bool HoldErrs; /* only output errors to transcript */ 905 EXTERN bool NoConnect; /* don't connect to non-local mailers */ 906 EXTERN bool SuperSafe; /* be extra careful, even if expensive */ 907 EXTERN bool ForkQueueRuns; /* fork for each job when running the queue */ 908 EXTERN bool AutoRebuild; /* auto-rebuild the alias database as needed */ 909 EXTERN bool CheckAliases; /* parse addresses during newaliases */ 910 EXTERN bool NoAlias; /* suppress aliasing */ 911 EXTERN bool UseNameServer; /* using DNS -- interpret h_errno & MX RRs */ 912 EXTERN bool UseHesiod; /* using Hesiod -- interpret Hesiod errors */ 913 EXTERN bool SevenBitInput; /* force 7-bit data on input */ 914 EXTERN bool HasEightBits; /* has at least one eight bit input byte */ 915 EXTERN time_t SafeAlias; /* interval to wait until @:@ in alias file */ 916 EXTERN FILE *InChannel; /* input connection */ 917 EXTERN FILE *OutChannel; /* output connection */ 918 EXTERN uid_t RealUid; /* when Daemon, real uid of caller */ 919 EXTERN gid_t RealGid; /* when Daemon, real gid of caller */ 920 EXTERN uid_t DefUid; /* default uid to run as */ 921 EXTERN gid_t DefGid; /* default gid to run as */ 922 EXTERN char *DefUser; /* default user to run as (from DefUid) */ 923 EXTERN int OldUmask; /* umask when sendmail starts up */ 924 EXTERN int Errors; /* set if errors (local to single pass) */ 925 EXTERN int ExitStat; /* exit status code */ 926 EXTERN int LineNumber; /* line number in current input */ 927 EXTERN int LogLevel; /* level of logging to perform */ 928 EXTERN int FileMode; /* mode on files */ 929 EXTERN int QueueLA; /* load average starting forced queueing */ 930 EXTERN int RefuseLA; /* load average refusing connections are */ 931 EXTERN int CurrentLA; /* current load average */ 932 EXTERN long QueueFactor; /* slope of queue function */ 933 EXTERN time_t QueueIntvl; /* intervals between running the queue */ 934 EXTERN char *HelpFile; /* location of SMTP help file */ 935 EXTERN char *ErrMsgFile; /* file to prepend to all error messages */ 936 EXTERN char *StatFile; /* location of statistics summary */ 937 EXTERN char *QueueDir; /* location of queue directory */ 938 EXTERN char *FileName; /* name to print on error messages */ 939 EXTERN char *SmtpPhase; /* current phase in SMTP processing */ 940 EXTERN char *MyHostName; /* name of this host for SMTP messages */ 941 EXTERN char *RealHostName; /* name of host we are talking to */ 942 EXTERN SOCKADDR RealHostAddr; /* address of host we are talking to */ 943 EXTERN char *CurHostName; /* current host we are dealing with */ 944 EXTERN jmp_buf TopFrame; /* branch-to-top-of-loop-on-error frame */ 945 EXTERN bool QuickAbort; /* .... but only if we want a quick abort */ 946 EXTERN bool LogUsrErrs; /* syslog user errors (e.g., SMTP RCPT cmd) */ 947 EXTERN bool SendMIMEErrors; /* send error messages in MIME format */ 948 EXTERN bool MatchGecos; /* look for user names in gecos field */ 949 EXTERN bool UseErrorsTo; /* use Errors-To: header (back compat) */ 950 EXTERN bool TryNullMXList; /* if we are the best MX, try host directly */ 951 EXTERN bool InChild; /* true if running in an SMTP subprocess */ 952 EXTERN bool DisConnected; /* running with OutChannel redirected to xf */ 953 EXTERN bool ColonOkInAddr; /* single colon legal in address */ 954 EXTERN bool NoMXforCanon; /* don't use MX records when canonifying */ 955 EXTERN char SpaceSub; /* substitution for <lwsp> */ 956 EXTERN int PrivacyFlags; /* privacy flags */ 957 EXTERN char *ConfFile; /* location of configuration file [conf.c] */ 958 extern char *PidFile; /* location of proc id file [conf.c] */ 959 extern ADDRESS NullAddress; /* a null (template) address [main.c] */ 960 EXTERN long WkClassFact; /* multiplier for message class -> priority */ 961 EXTERN long WkRecipFact; /* multiplier for # of recipients -> priority */ 962 EXTERN long WkTimeFact; /* priority offset each time this job is run */ 963 EXTERN char *UdbSpec; /* user database source spec */ 964 EXTERN int MaxHopCount; /* max # of hops until bounce */ 965 EXTERN int ConfigLevel; /* config file level */ 966 EXTERN char *TimeZoneSpec; /* override time zone specification */ 967 EXTERN char *ForwardPath; /* path to search for .forward files */ 968 EXTERN long MinBlocksFree; /* min # of blocks free on queue fs */ 969 EXTERN char *FallBackMX; /* fall back MX host */ 970 EXTERN long MaxMessageSize; /* advertised max size we will accept */ 971 EXTERN time_t MaxHostStatAge; /* max age of cached host status info */ 972 EXTERN time_t MinQueueAge; /* min delivery interval */ 973 EXTERN time_t DialDelay; /* delay between dial-on-demand tries */ 974 EXTERN char *SafeFileEnv; /* chroot location for file delivery */ 975 EXTERN char *ServiceSwitchFile; /* backup service switch */ 976 EXTERN char *DefaultCharSet; /* default character set for MIME */ 977 EXTERN int DeliveryNiceness; /* how nice to be during delivery */ 978 EXTERN char *PostMasterCopy; /* address to get errs cc's */ 979 EXTERN int CheckpointInterval; /* queue file checkpoint interval */ 980 EXTERN bool DontPruneRoutes; /* don't prune source routes */ 981 EXTERN int MaxMciCache; /* maximum entries in MCI cache */ 982 EXTERN time_t MciCacheTimeout; /* maximum idle time on connections */ 983 EXTERN char *QueueLimitRecipient; /* limit queue runs to this recipient */ 984 EXTERN char *QueueLimitSender; /* limit queue runs to this sender */ 985 EXTERN char *QueueLimitId; /* limit queue runs to this id */ 986 EXTERN FILE *TrafficLogFile; /* file in which to log all traffic */ 987 extern int errno; 988 989 990 /* 991 ** Timeouts 992 ** 993 ** Indicated values are the MINIMUM per RFC 1123 section 5.3.2. 994 */ 995 996 EXTERN struct 997 { 998 /* RFC 1123-specified timeouts [minimum value] */ 999 time_t to_initial; /* initial greeting timeout [5m] */ 1000 time_t to_mail; /* MAIL command [5m] */ 1001 time_t to_rcpt; /* RCPT command [5m] */ 1002 time_t to_datainit; /* DATA initiation [2m] */ 1003 time_t to_datablock; /* DATA block [3m] */ 1004 time_t to_datafinal; /* DATA completion [10m] */ 1005 time_t to_nextcommand; /* next command [5m] */ 1006 /* following timeouts are not mentioned in RFC 1123 */ 1007 time_t to_rset; /* RSET command */ 1008 time_t to_helo; /* HELO command */ 1009 time_t to_quit; /* QUIT command */ 1010 time_t to_miscshort; /* misc short commands (NOOP, VERB, etc) */ 1011 time_t to_ident; /* IDENT protocol requests */ 1012 time_t to_fileopen; /* opening :include: and .forward files */ 1013 /* following are per message */ 1014 time_t to_q_return[MAXTOCLASS]; /* queue return timeouts */ 1015 time_t to_q_warning[MAXTOCLASS]; /* queue warning timeouts */ 1016 } TimeOuts; 1017 1018 /* timeout classes for return and warning timeouts */ 1019 # define TOC_NORMAL 0 /* normal delivery */ 1020 # define TOC_URGENT 1 /* urgent delivery */ 1021 # define TOC_NONURGENT 2 /* non-urgent delivery */ 1022 1023 1024 /* 1025 ** Trace information 1026 */ 1027 1028 /* trace vector and macros for debugging flags */ 1029 EXTERN u_char tTdvect[100]; 1030 # define tTd(flag, level) (tTdvect[flag] >= level) 1031 # define tTdlevel(flag) (tTdvect[flag]) 1032 /* 1033 ** Miscellaneous information. 1034 */ 1035 1036 1037 1038 /* 1039 ** Some in-line functions 1040 */ 1041 1042 /* set exit status */ 1043 #define setstat(s) { \ 1044 if (ExitStat == EX_OK || ExitStat == EX_TEMPFAIL) \ 1045 ExitStat = s; \ 1046 } 1047 1048 /* make a copy of a string */ 1049 #define newstr(s) strcpy(xalloc(strlen(s) + 1), s) 1050 1051 #define STRUCTCOPY(s, d) d = s 1052 1053 1054 /* 1055 ** Declarations of useful functions 1056 */ 1057 1058 extern ADDRESS *parseaddr __P((char *, ADDRESS *, int, int, char **, ENVELOPE *)); 1059 extern char *xalloc __P((int)); 1060 extern bool sameaddr __P((ADDRESS *, ADDRESS *)); 1061 extern FILE *dfopen __P((char *, int, int)); 1062 extern EVENT *setevent __P((time_t, void(*)(), int)); 1063 extern char *sfgets __P((char *, int, FILE *, time_t, char *)); 1064 extern char *queuename __P((ENVELOPE *, int)); 1065 extern time_t curtime __P(()); 1066 extern bool transienterror __P((int)); 1067 extern const char *errstring __P((int)); 1068 extern void expand __P((char *, char *, size_t, ENVELOPE *)); 1069 extern void define __P((int, char *, ENVELOPE *)); 1070 extern char *macvalue __P((int, ENVELOPE *)); 1071 extern char *macname __P((int)); 1072 extern int macid __P((char *, char **)); 1073 extern char **prescan __P((char *, int, char[], int, char **, char *)); 1074 extern int rewrite __P((char **, int, int, ENVELOPE *)); 1075 extern char *fgetfolded __P((char *, int, FILE *)); 1076 extern ADDRESS *recipient __P((ADDRESS *, ADDRESS **, int, ENVELOPE *)); 1077 extern ENVELOPE *newenvelope __P((ENVELOPE *, ENVELOPE *)); 1078 extern void dropenvelope __P((ENVELOPE *)); 1079 extern void clearenvelope __P((ENVELOPE *, bool)); 1080 extern char *username __P(()); 1081 extern MCI *mci_get __P((char *, MAILER *)); 1082 extern char *pintvl __P((time_t, bool)); 1083 extern char *map_rewrite __P((MAP *, char *, int, char **)); 1084 extern ADDRESS *getctladdr __P((ADDRESS *)); 1085 extern char *anynet_ntoa __P((SOCKADDR *)); 1086 extern char *remotename __P((char *, MAILER *, int, int *, ENVELOPE *)); 1087 extern bool shouldqueue __P((long, time_t)); 1088 extern bool lockfile __P((int, char *, char *, int)); 1089 extern char *hostsignature __P((MAILER *, char *, ENVELOPE *)); 1090 extern void openxscript __P((ENVELOPE *)); 1091 extern void closexscript __P((ENVELOPE *)); 1092 extern sigfunc_t setsignal __P((int, sigfunc_t)); 1093 extern char *shortenstring __P((char *, int)); 1094 extern bool usershellok __P((char *)); 1095 extern void commaize __P((HDR *, char *, bool, MCI *, ENVELOPE *)); 1096 extern char *hvalue __P((char *, HDR *)); 1097 extern char *defcharset __P((ENVELOPE *)); 1098 extern bool emptyaddr __P((ADDRESS *)); 1099 extern int sendtolist __P((char *, ADDRESS *, ADDRESS **, int, ENVELOPE *)); 1100 extern bool wordinclass __P((char *, int)); 1101 extern char *denlstring __P((char *, bool, bool)); 1102 extern void printaddr __P((ADDRESS *, bool)); 1103 extern void makelower __P((char *)); 1104 extern void rebuildaliases __P((MAP *, bool)); 1105 extern void readaliases __P((MAP *, FILE *, bool, bool)); 1106 extern void finis __P(()); 1107 extern void clrevent __P((EVENT *)); 1108 extern void setsender __P((char *, ENVELOPE *, char **, bool)); 1109 extern FILE *safefopen __P((char *, int, int, int)); 1110 extern struct hostent *sm_gethostbyname __P((char *)); 1111 extern struct hostent *sm_gethostbyaddr __P((char *, int, int)); 1112 extern struct passwd *sm_getpwnam __P((char *)); 1113 extern struct passwd *sm_getpwuid __P((UID_T)); 1114 1115 /* ellipsis is a different case though */ 1116 #ifdef __STDC__ 1117 extern void auth_warning(ENVELOPE *, const char *, ...); 1118 extern void syserr(const char *, ...); 1119 extern void usrerr(const char *, ...); 1120 extern void message(const char *, ...); 1121 extern void nmessage(const char *, ...); 1122 #else 1123 extern void auth_warning(); 1124 extern void syserr(); 1125 extern void usrerr(); 1126 extern void message(); 1127 extern void nmessage(); 1128 #endif 1129