1 /* 2 * Copyright (c) 1983 Eric P. Allman 3 * Copyright (c) 1988, 1993 4 * The Regents of the University of California. All rights reserved. 5 * 6 * %sccs.include.redist.c% 7 * 8 * @(#)sendmail.h 8.68 (Berkeley) 11/08/94 9 */ 10 11 /* 12 ** SENDMAIL.H -- Global definitions for sendmail. 13 */ 14 15 # ifdef _DEFINE 16 # define EXTERN 17 # ifndef lint 18 static char SmailSccsId[] = "@(#)sendmail.h 8.68 11/08/94"; 19 # endif 20 # else /* _DEFINE */ 21 # define EXTERN extern 22 # endif /* _DEFINE */ 23 24 # include <unistd.h> 25 # include <stddef.h> 26 # include <stdlib.h> 27 # include <stdio.h> 28 # include <ctype.h> 29 # include <setjmp.h> 30 # include <sysexits.h> 31 # include <string.h> 32 # include <time.h> 33 # include <errno.h> 34 35 # include "conf.h" 36 # include "useful.h" 37 38 # ifdef LOG 39 # include <syslog.h> 40 # endif /* LOG */ 41 42 # ifdef DAEMON 43 # include <sys/socket.h> 44 # endif 45 # ifdef NETUNIX 46 # include <sys/un.h> 47 # endif 48 # ifdef NETINET 49 # include <netinet/in.h> 50 # endif 51 # ifdef NETISO 52 # include <netiso/iso.h> 53 # endif 54 # ifdef NETNS 55 # include <netns/ns.h> 56 # endif 57 # ifdef NETX25 58 # include <netccitt/x25.h> 59 # endif 60 61 62 63 64 /* 65 ** Data structure for bit maps. 66 ** 67 ** Each bit in this map can be referenced by an ascii character. 68 ** This is 256 possible bits, or 32 8-bit bytes. 69 */ 70 71 #define BITMAPBYTES 32 /* number of bytes in a bit map */ 72 #define BYTEBITS 8 /* number of bits in a byte */ 73 74 /* internal macros */ 75 #define _BITWORD(bit) (bit / (BYTEBITS * sizeof (int))) 76 #define _BITBIT(bit) (1 << (bit % (BYTEBITS * sizeof (int)))) 77 78 typedef int BITMAP[BITMAPBYTES / sizeof (int)]; 79 80 /* test bit number N */ 81 #define bitnset(bit, map) ((map)[_BITWORD(bit)] & _BITBIT(bit)) 82 83 /* set bit number N */ 84 #define setbitn(bit, map) (map)[_BITWORD(bit)] |= _BITBIT(bit) 85 86 /* clear bit number N */ 87 #define clrbitn(bit, map) (map)[_BITWORD(bit)] &= ~_BITBIT(bit) 88 89 /* clear an entire bit map */ 90 #define clrbitmap(map) bzero((char *) map, BITMAPBYTES) 91 /* 92 ** Address structure. 93 ** Addresses are stored internally in this structure. 94 */ 95 96 struct address 97 { 98 char *q_paddr; /* the printname for the address */ 99 char *q_user; /* user name */ 100 char *q_ruser; /* real user name, or NULL if q_user */ 101 char *q_host; /* host name */ 102 struct mailer *q_mailer; /* mailer to use */ 103 u_long q_flags; /* status flags, see below */ 104 uid_t q_uid; /* user-id of receiver (if known) */ 105 gid_t q_gid; /* group-id of receiver (if known) */ 106 char *q_home; /* home dir (local mailer only) */ 107 char *q_fullname; /* full name if known */ 108 struct address *q_next; /* chain */ 109 struct address *q_alias; /* address this results from */ 110 char *q_owner; /* owner of q_alias */ 111 struct address *q_tchain; /* temporary use chain */ 112 char *q_orcpt; /* ORCPT parameter from RCPT TO: line */ 113 char *q_status; /* status code & message for DSNs */ 114 time_t q_statdate; /* date of status message */ 115 char *q_statmta; /* MTA generating this message */ 116 }; 117 118 typedef struct address ADDRESS; 119 120 # define QDONTSEND 0x00000001 /* don't send to this address */ 121 # define QBADADDR 0x00000002 /* this address is verified bad */ 122 # define QGOODUID 0x00000004 /* the q_uid q_gid fields are good */ 123 # define QPRIMARY 0x00000008 /* set from argv */ 124 # define QQUEUEUP 0x00000010 /* queue for later transmission */ 125 # define QSENT 0x00000020 /* has been successfully delivered */ 126 # define QNOTREMOTE 0x00000040 /* address not for remote forwarding */ 127 # define QSELFREF 0x00000080 /* this address references itself */ 128 # define QVERIFIED 0x00000100 /* verified, but not expanded */ 129 # define QREPORT 0x00000200 /* report this addr in return message */ 130 # define QBOGUSSHELL 0x00000400 /* user has no valid shell listed */ 131 # define QUNSAFEADDR 0x00000800 /* address aquired via unsafe path */ 132 # define QPINGONSUCCESS 0x00001000 /* give return on successful delivery */ 133 # define QPINGONFAILURE 0x00002000 /* give return on failure */ 134 # define QPINGONDELAY 0x00004000 /* give return on message delay */ 135 # define QHASRETPARAM 0x00008000 /* RCPT command had RET argument */ 136 # define QNOBODYRETURN 0x00010000 /* don't return message body */ 137 # define QRELAYED 0x00020000 /* relayed to non-DSN aware mailer */ 138 139 # define NULLADDR ((ADDRESS *) NULL) 140 /* 141 ** Mailer definition structure. 142 ** Every mailer known to the system is declared in this 143 ** structure. It defines the pathname of the mailer, some 144 ** flags associated with it, and the argument vector to 145 ** pass to it. The flags are defined in conf.c 146 ** 147 ** The argument vector is expanded before actual use. All 148 ** words except the first are passed through the macro 149 ** processor. 150 */ 151 152 struct mailer 153 { 154 char *m_name; /* symbolic name of this mailer */ 155 char *m_mailer; /* pathname of the mailer to use */ 156 BITMAP m_flags; /* status flags, see below */ 157 short m_mno; /* mailer number internally */ 158 char **m_argv; /* template argument vector */ 159 short m_sh_rwset; /* rewrite set: sender header addresses */ 160 short m_se_rwset; /* rewrite set: sender envelope addresses */ 161 short m_rh_rwset; /* rewrite set: recipient header addresses */ 162 short m_re_rwset; /* rewrite set: recipient envelope addresses */ 163 char *m_eol; /* end of line string */ 164 long m_maxsize; /* size limit on message to this mailer */ 165 int m_linelimit; /* max # characters per line */ 166 char *m_execdir; /* directory to chdir to before execv */ 167 uid_t m_uid; /* UID to run as */ 168 gid_t m_gid; /* GID to run as */ 169 char *m_defcharset; /* default character set */ 170 }; 171 172 typedef struct mailer MAILER; 173 174 /* bits for m_flags */ 175 # define M_ESMTP 'a' /* run Extended SMTP protocol */ 176 # define M_ALIASABLE 'A' /* user can be LHS of an alias */ 177 # define M_BLANKEND 'b' /* ensure blank line at end of message */ 178 # define M_NOCOMMENT 'c' /* don't include comment part of address */ 179 # define M_CANONICAL 'C' /* make addresses canonical "u@dom" */ 180 # define M_NOBRACKET 'd' /* never angle bracket envelope route-addrs */ 181 /* 'D' /* CF: include Date: */ 182 # define M_EXPENSIVE 'e' /* it costs to use this mailer.... */ 183 # define M_ESCFROM 'E' /* escape From lines to >From */ 184 # define M_FOPT 'f' /* mailer takes picky -f flag */ 185 /* 'F' /* CF: include From: or Resent-From: */ 186 # define M_NO_NULL_FROM 'g' /* sender of errors should be $g */ 187 # define M_HST_UPPER 'h' /* preserve host case distinction */ 188 # define M_PREHEAD 'H' /* MAIL11V3: preview headers */ 189 # define M_UDBENVELOPE 'i' /* do udbsender rewriting on envelope */ 190 # define M_INTERNAL 'I' /* SMTP to another sendmail site */ 191 # define M_NOLOOPCHECK 'k' /* don't check for loops in HELO command */ 192 # define M_LOCALMAILER 'l' /* delivery is to this host */ 193 # define M_LIMITS 'L' /* must enforce SMTP line limits */ 194 # define M_MUSER 'm' /* can handle multiple users at once */ 195 /* 'M' /* CF: include Message-Id: */ 196 # define M_NHDR 'n' /* don't insert From line */ 197 # define M_MANYSTATUS 'N' /* MAIL11V3: DATA returns multi-status */ 198 # define M_RUNASRCPT 'o' /* always run mailer as recipient */ 199 # define M_FROMPATH 'p' /* use reverse-path in MAIL FROM: */ 200 /* 'P' /* CF: include Return-Path: */ 201 # define M_ROPT 'r' /* mailer takes picky -r flag */ 202 # define M_SECURE_PORT 'R' /* try to send on a reserved TCP port */ 203 # define M_STRIPQ 's' /* strip quote chars from user/host */ 204 # define M_SPECIFIC_UID 'S' /* run as specific uid/gid */ 205 # define M_USR_UPPER 'u' /* preserve user case distinction */ 206 # define M_UGLYUUCP 'U' /* this wants an ugly UUCP from line */ 207 /* 'V' /* UIUC: !-relativize all addresses */ 208 # define M_HASPWENT 'w' /* check for /etc/passwd entry */ 209 /* 'x' /* CF: include Full-Name: */ 210 # define M_XDOT 'X' /* use hidden-dot algorithm */ 211 # define M_TRYRULESET5 '5' /* use ruleset 5 after local aliasing */ 212 # define M_7BITS '7' /* use 7-bit path */ 213 # define M_8BITS '8' /* force "just send 8" behaviour */ 214 # define M_CHECKINCLUDE ':' /* check for :include: files */ 215 # define M_CHECKPROG '|' /* check for |program addresses */ 216 # define M_CHECKFILE '/' /* check for /file addresses */ 217 # define M_CHECKUDB '@' /* user can be user database key */ 218 219 EXTERN MAILER *Mailer[MAXMAILERS+1]; 220 221 EXTERN MAILER *LocalMailer; /* ptr to local mailer */ 222 EXTERN MAILER *ProgMailer; /* ptr to program mailer */ 223 EXTERN MAILER *FileMailer; /* ptr to *file* mailer */ 224 EXTERN MAILER *InclMailer; /* ptr to *include* mailer */ 225 /* 226 ** Header structure. 227 ** This structure is used internally to store header items. 228 */ 229 230 struct header 231 { 232 char *h_field; /* the name of the field */ 233 char *h_value; /* the value of that field */ 234 struct header *h_link; /* the next header */ 235 u_short h_flags; /* status bits, see below */ 236 BITMAP h_mflags; /* m_flags bits needed */ 237 }; 238 239 typedef struct header HDR; 240 241 /* 242 ** Header information structure. 243 ** Defined in conf.c, this struct declares the header fields 244 ** that have some magic meaning. 245 */ 246 247 struct hdrinfo 248 { 249 char *hi_field; /* the name of the field */ 250 u_short hi_flags; /* status bits, see below */ 251 }; 252 253 extern struct hdrinfo HdrInfo[]; 254 255 /* bits for h_flags and hi_flags */ 256 # define H_EOH 0x0001 /* this field terminates header */ 257 # define H_RCPT 0x0002 /* contains recipient addresses */ 258 # define H_DEFAULT 0x0004 /* if another value is found, drop this */ 259 # define H_RESENT 0x0008 /* this address is a "Resent-..." address */ 260 # define H_CHECK 0x0010 /* check h_mflags against m_flags */ 261 # define H_ACHECK 0x0020 /* ditto, but always (not just default) */ 262 # define H_FORCE 0x0040 /* force this field, even if default */ 263 # define H_TRACE 0x0080 /* this field contains trace information */ 264 # define H_FROM 0x0100 /* this is a from-type field */ 265 # define H_VALID 0x0200 /* this field has a validated value */ 266 # define H_RECEIPTTO 0x0400 /* this field has return receipt info */ 267 # define H_ERRORSTO 0x0800 /* this field has error address info */ 268 # define H_CTE 0x1000 /* this field is a content-transfer-encoding */ 269 /* 270 ** Information about currently open connections to mailers, or to 271 ** hosts that we have looked up recently. 272 */ 273 274 # define MCI struct mailer_con_info 275 276 MCI 277 { 278 short mci_flags; /* flag bits, see below */ 279 short mci_errno; /* error number on last connection */ 280 short mci_herrno; /* h_errno from last DNS lookup */ 281 short mci_exitstat; /* exit status from last connection */ 282 short mci_state; /* SMTP state */ 283 long mci_maxsize; /* max size this server will accept */ 284 FILE *mci_in; /* input side of connection */ 285 FILE *mci_out; /* output side of connection */ 286 int mci_pid; /* process id of subordinate proc */ 287 char *mci_phase; /* SMTP phase string */ 288 struct mailer *mci_mailer; /* ptr to the mailer for this conn */ 289 char *mci_host; /* host name */ 290 time_t mci_lastuse; /* last usage time */ 291 }; 292 293 294 /* flag bits */ 295 #define MCIF_VALID 0x0001 /* this entry is valid */ 296 #define MCIF_TEMP 0x0002 /* don't cache this connection */ 297 #define MCIF_CACHED 0x0004 /* currently in open cache */ 298 #define MCIF_ESMTP 0x0008 /* this host speaks ESMTP */ 299 #define MCIF_EXPN 0x0010 /* EXPN command supported */ 300 #define MCIF_SIZE 0x0020 /* SIZE option supported */ 301 #define MCIF_8BITMIME 0x0040 /* BODY=8BITMIME supported */ 302 #define MCIF_7BIT 0x0080 /* strip this message to 7 bits */ 303 #define MCIF_MULTSTAT 0x0100 /* MAIL11V3: handles MULT status */ 304 #define MCIF_INHEADER 0x0200 /* currently outputing header */ 305 #define MCIF_CVT8TO7 0x0400 /* convert from 8 to 7 bits */ 306 #define MCIF_DSN 0x0800 /* DSN extension supported */ 307 308 /* states */ 309 #define MCIS_CLOSED 0 /* no traffic on this connection */ 310 #define MCIS_OPENING 1 /* sending initial protocol */ 311 #define MCIS_OPEN 2 /* open, initial protocol sent */ 312 #define MCIS_ACTIVE 3 /* message being sent */ 313 #define MCIS_QUITING 4 /* running quit protocol */ 314 #define MCIS_SSD 5 /* service shutting down */ 315 #define MCIS_ERROR 6 /* I/O error on connection */ 316 /* 317 ** Envelope structure. 318 ** This structure defines the message itself. There is usually 319 ** only one of these -- for the message that we originally read 320 ** and which is our primary interest -- but other envelopes can 321 ** be generated during processing. For example, error messages 322 ** will have their own envelope. 323 */ 324 325 # define ENVELOPE struct envelope 326 327 ENVELOPE 328 { 329 HDR *e_header; /* head of header list */ 330 long e_msgpriority; /* adjusted priority of this message */ 331 time_t e_ctime; /* time message appeared in the queue */ 332 char *e_to; /* the target person */ 333 char *e_receiptto; /* return receipt address */ 334 ADDRESS e_from; /* the person it is from */ 335 char *e_sender; /* e_from.q_paddr w comments stripped */ 336 char **e_fromdomain; /* the domain part of the sender */ 337 ADDRESS *e_sendqueue; /* list of message recipients */ 338 ADDRESS *e_errorqueue; /* the queue for error responses */ 339 long e_msgsize; /* size of the message in bytes */ 340 long e_flags; /* flags, see below */ 341 int e_nrcpts; /* number of recipients */ 342 short e_class; /* msg class (priority, junk, etc.) */ 343 short e_hopcount; /* number of times processed */ 344 short e_nsent; /* number of sends since checkpoint */ 345 short e_sendmode; /* message send mode */ 346 short e_errormode; /* error return mode */ 347 short e_timeoutclass; /* message timeout class */ 348 int (*e_puthdr)__P((MCI *, HDR *, ENVELOPE *)); 349 /* function to put header of message */ 350 int (*e_putbody)__P((MCI *, ENVELOPE *, char *)); 351 /* function to put body of message */ 352 struct envelope *e_parent; /* the message this one encloses */ 353 struct envelope *e_sibling; /* the next envelope of interest */ 354 char *e_bodytype; /* type of message body */ 355 char *e_df; /* location of temp file */ 356 FILE *e_dfp; /* temporary file */ 357 char *e_id; /* code for this entry in queue */ 358 FILE *e_xfp; /* transcript file */ 359 FILE *e_lockfp; /* the lock file for this message */ 360 char *e_message; /* error message */ 361 char *e_statmsg; /* stat msg (changes per delivery) */ 362 char *e_msgboundary; /* MIME-style message part boundary */ 363 char *e_origrcpt; /* original recipient (one only) */ 364 char *e_envid; /* envelope id from MAIL FROM: line */ 365 time_t e_dtime; /* time of last delivery attempt */ 366 int e_ntries; /* number of delivery attempts */ 367 dev_t e_dfdev; /* df file's device, for crash recov */ 368 ino_t e_dfino; /* df file's ino, for crash recovery */ 369 char *e_macro[256]; /* macro definitions */ 370 }; 371 372 /* values for e_flags */ 373 #define EF_OLDSTYLE 0x0000001 /* use spaces (not commas) in hdrs */ 374 #define EF_INQUEUE 0x0000002 /* this message is fully queued */ 375 #define EF_NORETURN 0x0000004 /* don't return the message on error */ 376 #define EF_CLRQUEUE 0x0000008 /* disk copy is no longer needed */ 377 #define EF_SENDRECEIPT 0x0000010 /* send a return receipt */ 378 #define EF_FATALERRS 0x0000020 /* fatal errors occured */ 379 #define EF_KEEPQUEUE 0x0000040 /* keep queue files always */ 380 #define EF_RESPONSE 0x0000080 /* this is an error or return receipt */ 381 #define EF_RESENT 0x0000100 /* this message is being forwarded */ 382 #define EF_VRFYONLY 0x0000200 /* verify only (don't expand aliases) */ 383 #define EF_WARNING 0x0000400 /* warning message has been sent */ 384 #define EF_QUEUERUN 0x0000800 /* this envelope is from queue */ 385 #define EF_GLOBALERRS 0x0001000 /* treat errors as global */ 386 #define EF_PM_NOTIFY 0x0002000 /* send return mail to postmaster */ 387 #define EF_METOO 0x0004000 /* send to me too */ 388 #define EF_LOGSENDER 0x0008000 /* need to log the sender */ 389 #define EF_NORECEIPT 0x0010000 /* suppress all return-receipts */ 390 #define EF_HAS8BIT 0x0020000 /* at least one 8-bit char in body */ 391 #define EF_NL_NOT_EOL 0x0040000 /* don't accept raw NL as EOLine */ 392 #define EF_CRLF_NOT_EOL 0x0080000 /* don't accept CR-LF as EOLine */ 393 394 EXTERN ENVELOPE *CurEnv; /* envelope currently being processed */ 395 /* 396 ** Message priority classes. 397 ** 398 ** The message class is read directly from the Priority: header 399 ** field in the message. 400 ** 401 ** CurEnv->e_msgpriority is the number of bytes in the message plus 402 ** the creation time (so that jobs ``tend'' to be ordered correctly), 403 ** adjusted by the message class, the number of recipients, and the 404 ** amount of time the message has been sitting around. This number 405 ** is used to order the queue. Higher values mean LOWER priority. 406 ** 407 ** Each priority class point is worth WkClassFact priority points; 408 ** each recipient is worth WkRecipFact priority points. Each time 409 ** we reprocess a message the priority is adjusted by WkTimeFact. 410 ** WkTimeFact should normally decrease the priority so that jobs 411 ** that have historically failed will be run later; thanks go to 412 ** Jay Lepreau at Utah for pointing out the error in my thinking. 413 ** 414 ** The "class" is this number, unadjusted by the age or size of 415 ** this message. Classes with negative representations will have 416 ** error messages thrown away if they are not local. 417 */ 418 419 struct priority 420 { 421 char *pri_name; /* external name of priority */ 422 int pri_val; /* internal value for same */ 423 }; 424 425 EXTERN struct priority Priorities[MAXPRIORITIES]; 426 EXTERN int NumPriorities; /* pointer into Priorities */ 427 /* 428 ** Rewrite rules. 429 */ 430 431 struct rewrite 432 { 433 char **r_lhs; /* pattern match */ 434 char **r_rhs; /* substitution value */ 435 struct rewrite *r_next;/* next in chain */ 436 }; 437 438 EXTERN struct rewrite *RewriteRules[MAXRWSETS]; 439 440 /* 441 ** Special characters in rewriting rules. 442 ** These are used internally only. 443 ** The COND* rules are actually used in macros rather than in 444 ** rewriting rules, but are given here because they 445 ** cannot conflict. 446 */ 447 448 /* left hand side items */ 449 # define MATCHZANY 0220 /* match zero or more tokens */ 450 # define MATCHANY 0221 /* match one or more tokens */ 451 # define MATCHONE 0222 /* match exactly one token */ 452 # define MATCHCLASS 0223 /* match one token in a class */ 453 # define MATCHNCLASS 0224 /* match anything not in class */ 454 # define MATCHREPL 0225 /* replacement on RHS for above */ 455 456 /* right hand side items */ 457 # define CANONNET 0226 /* canonical net, next token */ 458 # define CANONHOST 0227 /* canonical host, next token */ 459 # define CANONUSER 0230 /* canonical user, next N tokens */ 460 # define CALLSUBR 0231 /* call another rewriting set */ 461 462 /* conditionals in macros */ 463 # define CONDIF 0232 /* conditional if-then */ 464 # define CONDELSE 0233 /* conditional else */ 465 # define CONDFI 0234 /* conditional fi */ 466 467 /* bracket characters for host name lookup */ 468 # define HOSTBEGIN 0235 /* hostname lookup begin */ 469 # define HOSTEND 0236 /* hostname lookup end */ 470 471 /* bracket characters for generalized lookup */ 472 # define LOOKUPBEGIN 0205 /* generalized lookup begin */ 473 # define LOOKUPEND 0206 /* generalized lookup end */ 474 475 /* macro substitution character */ 476 # define MACROEXPAND 0201 /* macro expansion */ 477 # define MACRODEXPAND 0202 /* deferred macro expansion */ 478 479 /* to make the code clearer */ 480 # define MATCHZERO CANONHOST 481 482 /* external <==> internal mapping table */ 483 struct metamac 484 { 485 char metaname; /* external code (after $) */ 486 u_char metaval; /* internal code (as above) */ 487 }; 488 /* 489 ** Name canonification short circuit. 490 ** 491 ** If the name server for a host is down, the process of trying to 492 ** canonify the name can hang. This is similar to (but alas, not 493 ** identical to) looking up the name for delivery. This stab type 494 ** caches the result of the name server lookup so we don't hang 495 ** multiple times. 496 */ 497 498 #define NAMECANON struct _namecanon 499 500 NAMECANON 501 { 502 short nc_errno; /* cached errno */ 503 short nc_herrno; /* cached h_errno */ 504 short nc_stat; /* cached exit status code */ 505 short nc_flags; /* flag bits */ 506 char *nc_cname; /* the canonical name */ 507 }; 508 509 /* values for nc_flags */ 510 #define NCF_VALID 0x0001 /* entry valid */ 511 /* 512 ** Mapping functions 513 ** 514 ** These allow arbitrary mappings in the config file. The idea 515 ** (albeit not the implementation) comes from IDA sendmail. 516 */ 517 518 # define MAPCLASS struct _mapclass 519 # define MAP struct _map 520 521 522 /* 523 ** An actual map. 524 */ 525 526 MAP 527 { 528 MAPCLASS *map_class; /* the class of this map */ 529 char *map_mname; /* name of this map */ 530 int map_mflags; /* flags, see below */ 531 char *map_file; /* the (nominal) filename */ 532 ARBPTR_T map_db1; /* the open database ptr */ 533 ARBPTR_T map_db2; /* an "extra" database pointer */ 534 char *map_keycolnm; /* key column name */ 535 char *map_valcolnm; /* value column name */ 536 u_char map_keycolno; /* key column number */ 537 u_char map_valcolno; /* value column number */ 538 char map_coldelim; /* column delimiter */ 539 char *map_app; /* to append to successful matches */ 540 char *map_domain; /* the (nominal) NIS domain */ 541 char *map_rebuild; /* program to run to do auto-rebuild */ 542 time_t map_mtime; /* last database modification time */ 543 MAP *map_stack[MAXMAPSTACK]; /* list for stacked maps */ 544 short map_return[3]; /* return bitmaps for stacked maps */ 545 }; 546 547 /* bit values for map_flags */ 548 # define MF_VALID 0x0001 /* this entry is valid */ 549 # define MF_INCLNULL 0x0002 /* include null byte in key */ 550 # define MF_OPTIONAL 0x0004 /* don't complain if map not found */ 551 # define MF_NOFOLDCASE 0x0008 /* don't fold case in keys */ 552 # define MF_MATCHONLY 0x0010 /* don't use the map value */ 553 # define MF_OPEN 0x0020 /* this entry is open */ 554 # define MF_WRITABLE 0x0040 /* open for writing */ 555 # define MF_ALIAS 0x0080 /* this is an alias file */ 556 # define MF_TRY0NULL 0x0100 /* try with no null byte */ 557 # define MF_TRY1NULL 0x0200 /* try with the null byte */ 558 # define MF_LOCKED 0x0400 /* this map is currently locked */ 559 # define MF_ALIASWAIT 0x0800 /* alias map in aliaswait state */ 560 # define MF_IMPL_HASH 0x1000 /* implicit: underlying hash database */ 561 # define MF_IMPL_NDBM 0x2000 /* implicit: underlying NDBM database */ 562 # define MF_UNSAFEDB 0x4000 /* this map is world writable */ 563 564 /* indices for map_actions */ 565 # define MA_NOTFOUND 0 /* member map returned "not found" */ 566 # define MA_UNAVAIL 1 /* member map is not available */ 567 # define MA_TRYAGAIN 2 /* member map returns temp failure */ 568 569 /* 570 ** The class of a map -- essentially the functions to call 571 */ 572 573 MAPCLASS 574 { 575 char *map_cname; /* name of this map class */ 576 char *map_ext; /* extension for database file */ 577 short map_cflags; /* flag bits, see below */ 578 bool (*map_parse)__P((MAP *, char *)); 579 /* argument parsing function */ 580 char *(*map_lookup)__P((MAP *, char *, char **, int *)); 581 /* lookup function */ 582 void (*map_store)__P((MAP *, char *, char *)); 583 /* store function */ 584 bool (*map_open)__P((MAP *, int)); 585 /* open function */ 586 void (*map_close)__P((MAP *)); 587 /* close function */ 588 }; 589 590 /* bit values for map_cflags */ 591 #define MCF_ALIASOK 0x0001 /* can be used for aliases */ 592 #define MCF_ALIASONLY 0x0002 /* usable only for aliases */ 593 #define MCF_REBUILDABLE 0x0004 /* can rebuild alias files */ 594 /* 595 ** Symbol table definitions 596 */ 597 598 struct symtab 599 { 600 char *s_name; /* name to be entered */ 601 char s_type; /* general type (see below) */ 602 struct symtab *s_next; /* pointer to next in chain */ 603 union 604 { 605 BITMAP sv_class; /* bit-map of word classes */ 606 ADDRESS *sv_addr; /* pointer to address header */ 607 MAILER *sv_mailer; /* pointer to mailer */ 608 char *sv_alias; /* alias */ 609 MAPCLASS sv_mapclass; /* mapping function class */ 610 MAP sv_map; /* mapping function */ 611 char *sv_hostsig; /* host signature */ 612 MCI sv_mci; /* mailer connection info */ 613 NAMECANON sv_namecanon; /* canonical name cache */ 614 int sv_macro; /* macro name => id mapping */ 615 } s_value; 616 }; 617 618 typedef struct symtab STAB; 619 620 /* symbol types */ 621 # define ST_UNDEF 0 /* undefined type */ 622 # define ST_CLASS 1 /* class map */ 623 # define ST_ADDRESS 2 /* an address in parsed format */ 624 # define ST_MAILER 3 /* a mailer header */ 625 # define ST_ALIAS 4 /* an alias */ 626 # define ST_MAPCLASS 5 /* mapping function class */ 627 # define ST_MAP 6 /* mapping function */ 628 # define ST_HOSTSIG 7 /* host signature */ 629 # define ST_NAMECANON 8 /* cached canonical name */ 630 # define ST_MACRO 9 /* macro name to id mapping */ 631 # define ST_MCI 16 /* mailer connection info (offset) */ 632 633 # define s_class s_value.sv_class 634 # define s_address s_value.sv_addr 635 # define s_mailer s_value.sv_mailer 636 # define s_alias s_value.sv_alias 637 # define s_mci s_value.sv_mci 638 # define s_mapclass s_value.sv_mapclass 639 # define s_hostsig s_value.sv_hostsig 640 # define s_map s_value.sv_map 641 # define s_namecanon s_value.sv_namecanon 642 # define s_macro s_value.sv_macro 643 644 extern STAB *stab __P((char *, int, int)); 645 extern void stabapply __P((void (*)(STAB *, int), int)); 646 647 /* opcodes to stab */ 648 # define ST_FIND 0 /* find entry */ 649 # define ST_ENTER 1 /* enter if not there */ 650 /* 651 ** STRUCT EVENT -- event queue. 652 ** 653 ** Maintained in sorted order. 654 ** 655 ** We store the pid of the process that set this event to insure 656 ** that when we fork we will not take events intended for the parent. 657 */ 658 659 struct event 660 { 661 time_t ev_time; /* time of the function call */ 662 int (*ev_func)__P((int)); 663 /* function to call */ 664 int ev_arg; /* argument to ev_func */ 665 int ev_pid; /* pid that set this event */ 666 struct event *ev_link; /* link to next item */ 667 }; 668 669 typedef struct event EVENT; 670 671 EXTERN EVENT *EventQueue; /* head of event queue */ 672 /* 673 ** Operation, send, error, and MIME modes 674 ** 675 ** The operation mode describes the basic operation of sendmail. 676 ** This can be set from the command line, and is "send mail" by 677 ** default. 678 ** 679 ** The send mode tells how to send mail. It can be set in the 680 ** configuration file. It's setting determines how quickly the 681 ** mail will be delivered versus the load on your system. If the 682 ** -v (verbose) flag is given, it will be forced to SM_DELIVER 683 ** mode. 684 ** 685 ** The error mode tells how to return errors. 686 */ 687 688 EXTERN char OpMode; /* operation mode, see below */ 689 690 #define MD_DELIVER 'm' /* be a mail sender */ 691 #define MD_SMTP 's' /* run SMTP on standard input */ 692 #define MD_ARPAFTP 'a' /* obsolete ARPANET mode (Grey Book) */ 693 #define MD_DAEMON 'd' /* run as a daemon */ 694 #define MD_VERIFY 'v' /* verify: don't collect or deliver */ 695 #define MD_TEST 't' /* test mode: resolve addrs only */ 696 #define MD_INITALIAS 'i' /* initialize alias database */ 697 #define MD_PRINT 'p' /* print the queue */ 698 #define MD_FREEZE 'z' /* freeze the configuration file */ 699 700 701 /* values for e_sendmode -- send modes */ 702 #define SM_DELIVER 'i' /* interactive delivery */ 703 #define SM_QUICKD 'j' /* deliver w/o queueing */ 704 #define SM_FORK 'b' /* deliver in background */ 705 #define SM_QUEUE 'q' /* queue, don't deliver */ 706 #define SM_VERIFY 'v' /* verify only (used internally) */ 707 708 /* used only as a parameter to sendall */ 709 #define SM_DEFAULT '\0' /* unspecified, use SendMode */ 710 711 712 /* values for e_errormode -- error handling modes */ 713 #define EM_PRINT 'p' /* print errors */ 714 #define EM_MAIL 'm' /* mail back errors */ 715 #define EM_WRITE 'w' /* write back errors */ 716 #define EM_BERKNET 'e' /* special berknet processing */ 717 #define EM_QUIET 'q' /* don't print messages (stat only) */ 718 719 720 /* MIME processing mode */ 721 EXTERN int MimeMode; 722 723 /* bit values for MimeMode */ 724 #define MM_CVTMIME 0x0001 /* convert 8 to 7 bit MIME */ 725 #define MM_PASS8BIT 0x0002 /* just send 8 bit data blind */ 726 #define MM_MIME8BIT 0x0004 /* convert 8-bit data to MIME */ 727 /* 728 ** Additional definitions 729 */ 730 731 732 /* 733 ** Privacy flags 734 ** These are bit values for the PrivacyFlags word. 735 */ 736 737 #define PRIV_PUBLIC 0 /* what have I got to hide? */ 738 #define PRIV_NEEDMAILHELO 0x0001 /* insist on HELO for MAIL, at least */ 739 #define PRIV_NEEDEXPNHELO 0x0002 /* insist on HELO for EXPN */ 740 #define PRIV_NEEDVRFYHELO 0x0004 /* insist on HELO for VRFY */ 741 #define PRIV_NOEXPN 0x0008 /* disallow EXPN command entirely */ 742 #define PRIV_NOVRFY 0x0010 /* disallow VRFY command entirely */ 743 #define PRIV_AUTHWARNINGS 0x0020 /* flag possible authorization probs */ 744 #define PRIV_NORECEIPTS 0x0040 /* disallow return receipts */ 745 #define PRIV_RESTRICTMAILQ 0x1000 /* restrict mailq command */ 746 #define PRIV_RESTRICTQRUN 0x2000 /* restrict queue run */ 747 #define PRIV_GOAWAY 0x0fff /* don't give no info, anyway, anyhow */ 748 749 /* struct defining such things */ 750 struct prival 751 { 752 char *pv_name; /* name of privacy flag */ 753 int pv_flag; /* numeric level */ 754 }; 755 756 757 /* 758 ** Flags passed to remotename, parseaddr, allocaddr, and buildaddr. 759 */ 760 761 #define RF_SENDERADDR 0x001 /* this is a sender address */ 762 #define RF_HEADERADDR 0x002 /* this is a header address */ 763 #define RF_CANONICAL 0x004 /* strip comment information */ 764 #define RF_ADDDOMAIN 0x008 /* OK to do domain extension */ 765 #define RF_COPYPARSE 0x010 /* copy parsed user & host */ 766 #define RF_COPYPADDR 0x020 /* copy print address */ 767 #define RF_COPYALL (RF_COPYPARSE|RF_COPYPADDR) 768 #define RF_COPYNONE 0 769 770 771 /* 772 ** Flags passed to safefile. 773 */ 774 775 #define SFF_ANYFILE 0 /* no special restrictions */ 776 #define SFF_MUSTOWN 0x0001 /* user must own this file */ 777 #define SFF_NOSLINK 0x0002 /* file cannot be a symbolic link */ 778 #define SFF_ROOTOK 0x0004 /* ok for root to own this file */ 779 780 781 /* 782 ** Regular UNIX sockaddrs are too small to handle ISO addresses, so 783 ** we are forced to declare a supertype here. 784 */ 785 786 union bigsockaddr 787 { 788 struct sockaddr sa; /* general version */ 789 #ifdef NETUNIX 790 struct sockaddr_un sunix; /* UNIX family */ 791 #endif 792 #ifdef NETINET 793 struct sockaddr_in sin; /* INET family */ 794 #endif 795 #ifdef NETISO 796 struct sockaddr_iso siso; /* ISO family */ 797 #endif 798 #ifdef NETNS 799 struct sockaddr_ns sns; /* XNS family */ 800 #endif 801 #ifdef NETX25 802 struct sockaddr_x25 sx25; /* X.25 family */ 803 #endif 804 }; 805 806 #define SOCKADDR union bigsockaddr 807 808 809 /* 810 ** Vendor codes 811 ** 812 ** Vendors can customize sendmail to add special behaviour, 813 ** generally for back compatibility. Ideally, this should 814 ** be set up in the .cf file using the "V" command. However, 815 ** it's quite reasonable for some vendors to want the default 816 ** be their old version; this can be set using 817 ** -DVENDOR_DEFAULT=VENDOR_xxx 818 ** in the Makefile. 819 ** 820 ** Vendors should apply to sendmail@CS.Berkeley.EDU for 821 ** unique vendor codes. 822 */ 823 824 #define VENDOR_BERKELEY 1 /* Berkeley-native configuration file */ 825 #define VENDOR_SUN 2 /* Sun-native configuration file */ 826 827 EXTERN int VendorCode; /* vendor-specific operation enhancements */ 828 /* 829 ** Global variables. 830 */ 831 832 EXTERN bool FromFlag; /* if set, "From" person is explicit */ 833 EXTERN bool MeToo; /* send to the sender also */ 834 EXTERN bool IgnrDot; /* don't let dot end messages */ 835 EXTERN bool SaveFrom; /* save leading "From" lines */ 836 EXTERN bool Verbose; /* set if blow-by-blow desired */ 837 EXTERN bool GrabTo; /* if set, get recipients from msg */ 838 EXTERN bool SuprErrs; /* set if we are suppressing errors */ 839 EXTERN bool HoldErrs; /* only output errors to transcript */ 840 EXTERN bool NoConnect; /* don't connect to non-local mailers */ 841 EXTERN bool SuperSafe; /* be extra careful, even if expensive */ 842 EXTERN bool ForkQueueRuns; /* fork for each job when running the queue */ 843 EXTERN bool AutoRebuild; /* auto-rebuild the alias database as needed */ 844 EXTERN bool CheckAliases; /* parse addresses during newaliases */ 845 EXTERN bool NoAlias; /* suppress aliasing */ 846 EXTERN bool UseNameServer; /* use internet domain name server */ 847 EXTERN bool SevenBitInput; /* force 7-bit data on input */ 848 EXTERN bool HasEightBits; /* has at least one eight bit input byte */ 849 EXTERN time_t SafeAlias; /* interval to wait until @:@ in alias file */ 850 EXTERN FILE *InChannel; /* input connection */ 851 EXTERN FILE *OutChannel; /* output connection */ 852 EXTERN uid_t RealUid; /* when Daemon, real uid of caller */ 853 EXTERN gid_t RealGid; /* when Daemon, real gid of caller */ 854 EXTERN uid_t DefUid; /* default uid to run as */ 855 EXTERN gid_t DefGid; /* default gid to run as */ 856 EXTERN char *DefUser; /* default user to run as (from DefUid) */ 857 EXTERN int OldUmask; /* umask when sendmail starts up */ 858 EXTERN int Errors; /* set if errors (local to single pass) */ 859 EXTERN int ExitStat; /* exit status code */ 860 EXTERN int AliasLevel; /* depth of aliasing */ 861 EXTERN int LineNumber; /* line number in current input */ 862 EXTERN int LogLevel; /* level of logging to perform */ 863 EXTERN int FileMode; /* mode on files */ 864 EXTERN int QueueLA; /* load average starting forced queueing */ 865 EXTERN int RefuseLA; /* load average refusing connections are */ 866 EXTERN int CurrentLA; /* current load average */ 867 EXTERN long QueueFactor; /* slope of queue function */ 868 EXTERN time_t QueueIntvl; /* intervals between running the queue */ 869 EXTERN char *HelpFile; /* location of SMTP help file */ 870 EXTERN char *ErrMsgFile; /* file to prepend to all error messages */ 871 EXTERN char *StatFile; /* location of statistics summary */ 872 EXTERN char *QueueDir; /* location of queue directory */ 873 EXTERN char *FileName; /* name to print on error messages */ 874 EXTERN char *SmtpPhase; /* current phase in SMTP processing */ 875 EXTERN char *MyHostName; /* name of this host for SMTP messages */ 876 EXTERN char *RealHostName; /* name of host we are talking to */ 877 EXTERN SOCKADDR RealHostAddr; /* address of host we are talking to */ 878 EXTERN char *CurHostName; /* current host we are dealing with */ 879 EXTERN jmp_buf TopFrame; /* branch-to-top-of-loop-on-error frame */ 880 EXTERN bool QuickAbort; /* .... but only if we want a quick abort */ 881 EXTERN bool LogUsrErrs; /* syslog user errors (e.g., SMTP RCPT cmd) */ 882 EXTERN bool SendMIMEErrors; /* send error messages in MIME format */ 883 EXTERN bool MatchGecos; /* look for user names in gecos field */ 884 EXTERN bool UseErrorsTo; /* use Errors-To: header (back compat) */ 885 EXTERN bool TryNullMXList; /* if we are the best MX, try host directly */ 886 EXTERN bool InChild; /* true if running in an SMTP subprocess */ 887 EXTERN bool DisConnected; /* running with OutChannel redirected to xf */ 888 EXTERN char SpaceSub; /* substitution for <lwsp> */ 889 EXTERN int PrivacyFlags; /* privacy flags */ 890 EXTERN char *ConfFile; /* location of configuration file [conf.c] */ 891 extern char *PidFile; /* location of proc id file [conf.c] */ 892 extern ADDRESS NullAddress; /* a null (template) address [main.c] */ 893 EXTERN long WkClassFact; /* multiplier for message class -> priority */ 894 EXTERN long WkRecipFact; /* multiplier for # of recipients -> priority */ 895 EXTERN long WkTimeFact; /* priority offset each time this job is run */ 896 EXTERN char *UdbSpec; /* user database source spec */ 897 EXTERN int MaxHopCount; /* max # of hops until bounce */ 898 EXTERN int ConfigLevel; /* config file level */ 899 EXTERN char *TimeZoneSpec; /* override time zone specification */ 900 EXTERN char *ForwardPath; /* path to search for .forward files */ 901 EXTERN long MinBlocksFree; /* min # of blocks free on queue fs */ 902 EXTERN char *FallBackMX; /* fall back MX host */ 903 EXTERN long MaxMessageSize; /* advertised max size we will accept */ 904 EXTERN time_t MaxHostStatAge; /* max age of cached host status info */ 905 EXTERN time_t MinQueueAge; /* min delivery interval */ 906 EXTERN char *ServiceSwitchFile; /* backup service switch */ 907 EXTERN char *DefaultCharSet; /* default character set for MIME */ 908 EXTERN int DeliveryNiceness; /* how nice to be during delivery */ 909 EXTERN char *PostMasterCopy; /* address to get errs cc's */ 910 EXTERN int CheckpointInterval; /* queue file checkpoint interval */ 911 EXTERN bool DontPruneRoutes; /* don't prune source routes */ 912 EXTERN bool BrokenSmtpPeers; /* peers can't handle 2-line greeting */ 913 EXTERN bool SortQueueByHost; /* order queue by host name first */ 914 EXTERN int MaxMciCache; /* maximum entries in MCI cache */ 915 EXTERN time_t MciCacheTimeout; /* maximum idle time on connections */ 916 EXTERN char *QueueLimitRecipient; /* limit queue runs to this recipient */ 917 EXTERN char *QueueLimitSender; /* limit queue runs to this sender */ 918 EXTERN char *QueueLimitId; /* limit queue runs to this id */ 919 EXTERN FILE *TrafficLogFile; /* file in which to log all traffic */ 920 extern int errno; 921 922 923 /* 924 ** Timeouts 925 ** 926 ** Indicated values are the MINIMUM per RFC 1123 section 5.3.2. 927 */ 928 929 EXTERN struct 930 { 931 /* RFC 1123-specified timeouts [minimum value] */ 932 time_t to_initial; /* initial greeting timeout [5m] */ 933 time_t to_mail; /* MAIL command [5m] */ 934 time_t to_rcpt; /* RCPT command [5m] */ 935 time_t to_datainit; /* DATA initiation [2m] */ 936 time_t to_datablock; /* DATA block [3m] */ 937 time_t to_datafinal; /* DATA completion [10m] */ 938 time_t to_nextcommand; /* next command [5m] */ 939 /* following timeouts are not mentioned in RFC 1123 */ 940 time_t to_rset; /* RSET command */ 941 time_t to_helo; /* HELO command */ 942 time_t to_quit; /* QUIT command */ 943 time_t to_miscshort; /* misc short commands (NOOP, VERB, etc) */ 944 time_t to_ident; /* IDENT protocol requests */ 945 time_t to_fileopen; /* opening :include: and .forward files */ 946 /* following are per message */ 947 time_t to_q_return[MAXTOCLASS]; /* queue return timeouts */ 948 time_t to_q_warning[MAXTOCLASS]; /* queue warning timeouts */ 949 } TimeOuts; 950 951 /* timeout classes for return and warning timeouts */ 952 # define TOC_NORMAL 0 /* normal delivery */ 953 # define TOC_URGENT 1 /* urgent delivery */ 954 # define TOC_NONURGENT 2 /* non-urgent delivery */ 955 956 957 /* 958 ** Trace information 959 */ 960 961 /* trace vector and macros for debugging flags */ 962 EXTERN u_char tTdvect[100]; 963 # define tTd(flag, level) (tTdvect[flag] >= level) 964 # define tTdlevel(flag) (tTdvect[flag]) 965 /* 966 ** Miscellaneous information. 967 */ 968 969 970 971 /* 972 ** Some in-line functions 973 */ 974 975 /* set exit status */ 976 #define setstat(s) { \ 977 if (ExitStat == EX_OK || ExitStat == EX_TEMPFAIL) \ 978 ExitStat = s; \ 979 } 980 981 /* make a copy of a string */ 982 #define newstr(s) strcpy(xalloc(strlen(s) + 1), s) 983 984 #define STRUCTCOPY(s, d) d = s 985 986 987 /* 988 ** Declarations of useful functions 989 */ 990 991 extern ADDRESS *parseaddr __P((char *, ADDRESS *, int, int, char **, ENVELOPE *)); 992 extern char *xalloc __P((int)); 993 extern bool sameaddr __P((ADDRESS *, ADDRESS *)); 994 extern FILE *dfopen __P((char *, int, int)); 995 extern EVENT *setevent __P((time_t, int(*)(), int)); 996 extern char *sfgets __P((char *, int, FILE *, time_t, char *)); 997 extern char *queuename __P((ENVELOPE *, int)); 998 extern time_t curtime __P(()); 999 extern bool transienterror __P((int)); 1000 extern const char *errstring __P((int)); 1001 extern void expand __P((char *, char *, char *, ENVELOPE *)); 1002 extern void define __P((int, char *, ENVELOPE *)); 1003 extern char *macvalue __P((int, ENVELOPE *)); 1004 extern char *macname __P((int)); 1005 extern int macid __P((char *, char **)); 1006 extern char **prescan __P((char *, int, char[], int, char **)); 1007 extern int rewrite __P((char **, int, int, ENVELOPE *)); 1008 extern char *fgetfolded __P((char *, int, FILE *)); 1009 extern ADDRESS *recipient __P((ADDRESS *, ADDRESS **, ENVELOPE *)); 1010 extern ENVELOPE *newenvelope __P((ENVELOPE *, ENVELOPE *)); 1011 extern void dropenvelope __P((ENVELOPE *)); 1012 extern void clearenvelope __P((ENVELOPE *, int)); 1013 extern char *username __P(()); 1014 extern MCI *mci_get __P((char *, MAILER *)); 1015 extern char *pintvl __P((time_t, int)); 1016 extern char *map_rewrite __P((MAP *, char *, int, char **)); 1017 extern ADDRESS *getctladdr __P((ADDRESS *)); 1018 extern char *anynet_ntoa __P((SOCKADDR *)); 1019 extern char *remotename __P((char *, MAILER *, int, int *, ENVELOPE *)); 1020 extern bool shouldqueue __P((long, time_t)); 1021 extern bool lockfile __P((int, char *, char *, int)); 1022 extern char *hostsignature __P((MAILER *, char *, ENVELOPE *)); 1023 extern void openxscript __P((ENVELOPE *)); 1024 extern void closexscript __P((ENVELOPE *)); 1025 extern sigfunc_t setsignal __P((int, sigfunc_t)); 1026 extern char *shortenstring __P((char *, int)); 1027 extern bool usershellok __P((char *)); 1028 extern void commaize __P((HDR *, char *, int, MCI *, ENVELOPE *)); 1029 extern char *hvalue __P((char *, HDR *)); 1030 extern char *defcharset __P((ENVELOPE *)); 1031 1032 /* ellipsis is a different case though */ 1033 #ifdef __STDC__ 1034 extern void auth_warning(ENVELOPE *, const char *, ...); 1035 extern void syserr(const char *, ...); 1036 extern void usrerr(const char *, ...); 1037 extern void message(const char *, ...); 1038 extern void nmessage(const char *, ...); 1039 #else 1040 extern void auth_warning(); 1041 extern void syserr(); 1042 extern void usrerr(); 1043 extern void message(); 1044 extern void nmessage(); 1045 #endif 1046