xref: /csrg-svn/sys/vax/if/if_acc.c (revision 5638)
1 /*	if_acc.c	4.1	82/02/01	*/
2 
3 #include "acc.h"
4 #ifdef NACC > 0
5 
6 /*
7  * ACC LH/DH ARPAnet IMP interface driver.
8  */
9 
10 #include "../h/param.h"
11 #include "../h/systm.h"
12 #include "../h/mbuf.h"
13 #include "../h/pte.h"
14 #include "../h/buf.h"
15 #include "../h/protosw.h"
16 #include "../h/socket.h"
17 #include "../h/ubareg.h"
18 #include "../h/ubavar.h"
19 #include "../h/accreg.h"
20 #include "../h/cpu.h"
21 #include "../h/mtpr.h"
22 #include "../h/vmmac.h"
23 #include "../net/in.h"
24 #include "../net/in_systm.h"
25 #include "../net/if.h"
26 #include "../net/if_imp.h"
27 #include "../net/if_uba.h"
28 
29 int     accprobe(), accattach(), accrint(), accxint();
30 struct  uba_device *accinfo[NACC];
31 u_short accstd[] = { 0 };
32 struct  uba_driver accdriver =
33 	{ accprobe, 0, accattach, 0, accstd, "acc", accinfo };
34 #define	ACCUNIT(x)	minor(x)
35 
36 int	accinit(), accstart(), accreset();
37 
38 /*
39  * "Lower half" of IMP interface driver.
40  *
41  * Each IMP interface is handled by a common module which handles
42  * the IMP-host protocol and a hardware driver which manages the
43  * hardware specific details of talking with the IMP.
44  *
45  * The hardware portion of the IMP driver handles DMA and related
46  * management of UNIBUS resources.  The IMP protocol module interprets
47  * contents of these messages and "controls" the actions of the
48  * hardware module during IMP resets, but not, for instance, during
49  * UNIBUS resets.
50  *
51  * The two modules are coupled at "attach time", and ever after,
52  * through the imp interface structure.  Higher level protocols,
53  * e.g. IP, interact with the IMP driver, rather than the ACC.
54  */
55 struct	acc_softc {
56 	struct	ifnet *acc_if;		/* pointer to IMP's ifnet struct */
57 	struct	impcb *acc_ic;		/* data structure shared with IMP */
58 	struct	ifuba acc_ifuba;	/* UNIBUS resources */
59 	struct	mbuf *acc_iq;		/* input reassembly queue */
60 	short	acc_olen;		/* size of last message sent */
61 	char	acc_flush;		/* flush remainder of message */
62 	char	acc_previous;		/* something on input queue */
63 } acc_softc[NACC];
64 
65 /*
66  * Reset the IMP and cause a transmitter interrupt by
67  * performing a null DMA.
68  */
69 accprobe(reg)
70 	caddr_t reg;
71 {
72 	register int br, cvec;		/* r11, r10 value-result */
73 	register struct accdevice *addr = (struct accdevice *)reg;
74 
75 COUNT(ACCPROBE);
76 #ifdef lint
77 	br = 0; cvec = br; br = cvec;
78 	accrint(0); accxint(0);
79 #endif
80 	addr->acc_icsr = ACC_RESET;
81 	DELAY(500000);
82 	addr->acc_ocsr = ACC_RESET;
83 	DELAY(500000);
84 
85 	addr->acc_ocsr = OUT_BBACK;
86 	DELAY(500000);
87 	addr->acc_owc = 0;
88 	addr->acc_ocsr = ACC_IE | ACC_GO;
89 	DELAY(500000);
90 	addr->acc_ocsr = 0;
91 	/* interrupt was for transmit, push back to receive vector */
92 	if (cvec && cvec != 0x200)
93 		cvec -= 4;
94 	return (1);
95 }
96 
97 /*
98  * Call the IMP module to allow it to set up its internal
99  * state, then tie the two modules together by setting up
100  * the back pointers to common data structures.
101  */
102 accattach(ui)
103 	struct uba_device *ui;
104 {
105 	register struct acc_softc *sc = &acc_softc[ui->ui_unit];
106 	register struct impcb *ip;
107 	struct ifimpcb {
108 		struct	ifnet ifimp_if;
109 		struct	impcb ifimp_impcb;
110 	} *ifimp;
111 
112 COUNT(ACCATTACH);
113 	if ((ifimp = (struct ifimpcb *)impattach(ui)) == 0)
114 		panic("accattach");		/* XXX */
115 	sc->acc_if = &ifimp->ifimp_if;
116 	ip = &ifimp->ifimp_impcb;
117 	sc->acc_ic = ip;
118 	ip->ic_init = accinit;
119 	ip->ic_start = accstart;
120 }
121 
122 /*
123  * Reset interface after UNIBUS reset.
124  * If interface is on specified uba, reset its state.
125  */
126 accreset(unit, uban)
127 	int unit, uban;
128 {
129 	register struct uba_device *ui;
130 	struct acc_softc *sc;
131 
132 COUNT(ACCRESET);
133 	if (unit >= NACC || (ui = accinfo[unit]) == 0 || ui->ui_alive == 0 ||
134 	    ui->ui_ubanum != uban)
135 		return;
136 	printf(" acc%d", unit);
137 	sc = &acc_softc[unit];
138 	/* must go through IMP to allow it to set state */
139 	(*sc->acc_if->if_init)(unit);
140 }
141 
142 /*
143  * Initialize interface: clear recorded pending operations,
144  * and retrieve, and reinitialize UNIBUS resources.
145  */
146 accinit(unit)
147 	int unit;
148 {
149 	register struct acc_softc *sc = &acc_softc[unit];
150 	register struct uba_device *ui = accinfo[unit];
151 	register struct accdevice *addr;
152 	int x, info;
153 
154 COUNT(ACCINIT);
155 	if (if_ubainit(&sc->acc_ifuba, ui->ui_ubanum,
156 	      sizeof(struct imp_leader), (int)btop(IMP_MTU)) == 0) {
157 		printf("acc%d: can't initialize\n", unit);
158 		return;
159 	}
160 	addr = (struct accdevice *)ui->ui_addr;
161 
162 	/* reset the imp interface. */
163 	x = spl5();
164 	addr->acc_icsr = ACC_RESET;
165         addr->acc_ocsr = ACC_RESET;
166 	addr->acc_ocsr = OUT_BBACK;	/* reset host master ready */
167 	addr->acc_ocsr = 0;
168 	addr->acc_icsr = IN_MRDY;	/* close the relay */
169 	splx(x);
170 
171 	/* YECH!!! */
172 	while ((addr->acc_icsr & IN_HRDY) == 0 ||
173 	       (addr->acc_icsr & (IN_RMR | IN_IMPBSY))) {
174 		/* keep turning IN_RMR off */
175 		addr->acc_icsr = IN_MRDY;
176 		sleep((caddr_t)&lbolt, PZERO);
177 	}
178 
179 	/*
180 	 * Put up a read.  We can't restart any outstanding writes
181 	 * until we're back in synch with the IMP (i.e. we've flushed
182 	 * the NOOPs it throws at us).
183 	 */
184 	x = spl5();
185 	info = sc->acc_ifuba.ifu_r.ifrw_info;
186 	addr->acc_iba = (u_short)info;
187 	addr->acc_iwc = -(sizeof(struct imp_leader) + IMP_MTU) >> 1;
188 	addr->acc_icsr =
189 		IN_MRDY | ACC_IE | IN_WEN | ((info & 0x30000) >> 12) | ACC_GO;
190 	splx(x);
191 }
192 
193 /*
194  * Start output on an interface.
195  */
196 accstart(dev)
197 	dev_t dev;
198 {
199 	int unit = ACCUNIT(dev), info;
200 	struct uba_device *ui = accinfo[unit];
201 	register struct acc_softc *sc = &acc_softc[unit];
202 	register struct accdevice *addr;
203 	struct mbuf *m;
204 	u_short cmd;
205 
206 COUNT(ACCSTART);
207 	if (sc->acc_ic->ic_oactive)
208 		goto restart;
209 
210 	/*
211 	 * Not already active, deqeue a request and
212 	 * map it onto the UNIBUS.  If no more
213 	 * requeusts, just return.
214 	 */
215 	IF_DEQUEUE(&sc->acc_if->if_snd, m);
216 	if (m == 0) {
217 		sc->acc_ic->ic_oactive = 0;
218 		return;
219 	}
220 	sc->acc_olen = if_wubaput(&sc->acc_ifuba, m);
221 
222 restart:
223 	/*
224 	 * Have request mapped to UNIBUS for transmission.
225 	 * Purge any stale data from the BDP, and start the output.
226 	 */
227 	UBAPURGE(sc->acc_ifuba.ifu_uba, sc->acc_ifuba.ifu_w.ifrw_bdp);
228 	addr = (struct accdevice *)ui->ui_addr;
229 	info = sc->acc_ifuba.ifu_w.ifrw_info;
230 	addr->acc_oba = (u_short)info;
231 	addr->acc_owc = -((sc->acc_olen + 1) >> 1);
232 	cmd = ACC_IE | OUT_ENLB | ((info & 0x30000) >> 12) | ACC_GO;
233 	addr->acc_ocsr = cmd;
234 	sc->acc_ic->ic_oactive = 1;
235 }
236 
237 /*
238  * Output interrupt handler.
239  */
240 accxint(unit)
241 {
242 	register struct uba_device *ui = accinfo[unit];
243 	register struct acc_softc *sc = &acc_softc[unit];
244 	register struct accdevice *addr;
245 
246 COUNT(ACCXINT);
247 	if (sc->acc_ic->ic_oactive == 0) {
248 		printf("acc%d: stray output interrupt\n", unit);
249 		return;
250 	}
251 	addr = (struct accdevice *)ui->ui_addr;
252 	sc->acc_if->if_opackets++;
253 	sc->acc_ic->ic_oactive = 0;
254 	if (addr->acc_ocsr & ACC_ERR)
255 		printf("acc%d: output error, csr=%b\n", unit,
256 			addr->acc_ocsr, ACC_OUTBITS);
257 	if (sc->acc_if->if_snd.ifq_head == 0) {
258 		sc->acc_if->if_oerrors++;
259 		if (sc->acc_ifuba.ifu_xtofree) {
260 			m_freem(sc->acc_ifuba.ifu_xtofree);
261 			sc->acc_ifuba.ifu_xtofree = 0;
262 		}
263 		return;
264 	}
265 	accstart(unit);
266 }
267 
268 /*
269  * Input interrupt handler
270  */
271 accrint(unit)
272 {
273 	register struct acc_softc *sc = &acc_softc[unit];
274 	register struct accdevice *addr;
275 	register struct ifqueue *inq;
276     	struct mbuf *m;
277 	int len, info;
278 
279 COUNT(ACCRINT);
280 	sc->acc_if->if_ipackets++;
281 
282 	/*
283 	 * Purge BDP; flush message if error indicated.
284 	 */
285 	UBAPURGE(sc->acc_ifuba.ifu_uba, sc->acc_ifuba.ifu_r.ifrw_bdp);
286 	addr = (struct accdevice *)accinfo[unit]->ui_addr;
287 	if (addr->acc_icsr & ACC_ERR) {
288 		printf("acc%d: recv error, csr=%b\n", unit,
289 		    addr->acc_icsr, ACC_INBITS);
290 		sc->acc_if->if_ierrors++;
291 		sc->acc_flush = 1;
292 	}
293 
294 	if (sc->acc_flush) {
295 		if (addr->acc_icsr & IN_EOM)
296 			sc->acc_flush = 0;
297 		goto setup;
298 	}
299 	len = sizeof(struct imp_leader) + (addr->acc_iwc << 1);
300 
301 	/*
302 	 * The last parameter is always 0 since using
303 	 * trailers on the ARPAnet is insane.
304 	 */
305 	m = if_rubaget(&sc->acc_ifuba, len, 0);
306 	if (m == 0)
307 		goto setup;
308 	if ((addr->acc_icsr & IN_EOM) == 0) {
309 		if (sc->acc_previous)
310 			m_cat(sc->acc_iq, m);
311 		else {
312 			sc->acc_iq = m;
313 			sc->acc_previous = 1;
314 		}
315 		goto setup;
316 	}
317 	/* adjust message length for padding. */
318 	m->m_len -= 2;
319 	if (sc->acc_previous) {
320 		m_cat(sc->acc_iq, m);
321 		m = sc->acc_iq;
322 		sc->acc_iq = 0;
323 		sc->acc_previous = 0;
324 	}
325 	impinput(unit, m);
326 
327 setup:
328 	/*
329 	 * Setup for next message.
330 	 */
331 	info = sc->acc_ifuba.ifu_r.ifrw_info;
332 	addr->acc_iba = (u_short)info;
333 	addr->acc_iwc = - (sizeof(struct imp_leader) + IMP_MTU) >> 1;
334 	addr->acc_icsr =
335 		IN_MRDY | ACC_IE | IN_WEN | ((info & 0x30000) >> 12) | ACC_GO;
336 }
337 #endif
338