xref: /csrg-svn/share/man/man4/tty.4 (revision 55909)

.\" Copyright (c) 1991, 1992 The Regents of the University of California.
.\" All rights reserved.
.\"
.\" %sccs.include.redist.roff%
.\"
.\"     @(#)tty.4	6.11 (Berkeley) 08/15/92
.\"
.Dd August 14, 1992
.Dt TTY 4
.Os BSD 4
.Sh NAME
.Nm tty
.Nd general terminal interface
.Sh SYNOPSIS
.Fd #include <sys/ioctl.h>
.Sh DESCRIPTION
This section describes the interface to the terminal drivers
in the system.
.Ss Terminal Special Files
Each hardware terminal port on the system usually has a terminal special device
file associated with it in the directory ``/dev/'' (for
example, ``/dev/tty03'').
When a user logs into
the system on one of these hardware terminal ports, the system has already
opened the associated device and prepared the line for normal interactive
use (see
.Xr getty 8 .)
There is also a special case of a terminal file that connects not to
a hardware terminal port, but to another program on the other side.
These special terminal devices are called
.Em ptys
and provide the mechanism necessary to give users the same interface to the
system when logging in over a network (using
.Xr rlogin 1 ,
or
.Xr telnet 1
for example.)  Even in these cases the details of how the terminal
file was opened and set up is already handled by special software
in the system.
Thus, users do not normally need to worry about the details of
how these lines are opened or used.  Also, these lines are often used
for dialing out of a system (through an out-calling modem), but again
the system provides programs that hide the details of accessing
these terminal special files (see
.Xr tip 2 .)
.Pp
When an interactive user logs in, the system prepares the line to
behave in a certain way (called a
.Em "line discipline" ),
the particular details of which is described in
.Xr stty 1
at the command level, and in
.Xr termios 4
at the programming level.  A user may be concerned with changing
settings associated with his particular login terminal and should refer
to the preceding man pages for the common cases.  The remainder of
this man page is concerned
with describing details of using and controlling terminal devices
at a low level, such as that possibly required by a program wishing
to provide features similar to those provided by the system.
.Ss Line disciplines
A terminal file is used like any other file in the system in that
it can be opened, read, and written to using standard system
calls.  For each existing terminal file, a software processing module
called a
.Em "line discipline"
is associated with it.  The
.Em "line discipline"
essentially glues the low level device driver code with the high
level generic interface routines (such as
.Xr read 2
and
.Xr write 2 ),
and is responsible for implementing the semantics associated
with the device.  When a terminal file is first opened by a program,
the default
.Em "line discipline"
called the
.Dv termios
line discipline is associated with the file.  This is the primary
line discipline that is used in most cases and provides the semantics
that users normally associate with a terminal.  When the
.Dv termios
line discipline is in effect, the terminal file behaves and is
operated according to the rules described in
.Xr termios 4 .
Please refer to that man page for a full description of the terminal
semantics.
The operations described here
generally represent features common
across all
.Em "line disciplines"
however, some of these calls may not
make sense in conjunction with a line discipline other than
.Dv termios ,
and some may not be supported by the underlying
hardware or (lack thereof, as in the case of ptys).
.Ss Terminal File Operations
All of the following operations are invoked using the
.Xr ioctl 2
system call.  Refer to that man page for a description of
the
.Em request
and
.Em argp
parameter.
In addition to the ioctl
.Em requests
defined here, the specific line discipline
in effect will define other
.Em requests
specific to it (actually
.Xr termios 4
defines them as function calls, not ioctl
.Em requests .)
The following section lists the available ioctl requests.  The
name of the request and the typed
.Em argp
parameter (if any)
is listed along with a description of its
purpose.  For example, the first entry says
.Pp
.D1 Em "TIOCSETD int *ldisc"
.Pp
and would be called on the terminal associated with
file discriptor zero by the following code fragment:
.Bd -literal
	int ldisc;

	ldisc = TTYDISC;
	ioctl(0, TIOCSETD, &ldisc);
.Ed
.Ss Terminal File Request Descriptions
.Bl -tag -width TIOCGWINSZ
.It Dv TIOCSETD Fa int *ldisc
Change to the new line discipline pointed to by
.Fa ldisc .
The available line disciplines are listed in
.Pa Aq sys/termios.h
and currently are:
.Pp
.Bl -tag -width TIOCGWINSZ -compact
.It TTYDISC
Termios interactive line discipline.
.It TABLDISC
Tablet line discipline.
.It SLIPDISC
Serial IP line discipline.
.El
.Pp
.It Dv TIOCGETD Fa int *ldisc
Return the current line discipline in the integer pointed to by
.Fa ldisc .
.It Dv TIOCSBRK Fa void
Set the terminal hardware into BREAK condition.
.It Dv TIOCCBRK Fa void
Clear the terminal hardware BREAK condition.
.It Dv TIOCSDTR Fa void
Assert data terminal ready (DTR).
.It Dv TIOCCDTR Fa void
Clear data terminal ready (DTR).
.It Dv TIOCGPGRP Fa int *tpgrp
Return the current process group the terminal is associated
with in the integer pointed to by
.Fa tpgrp .
This is the underlying call that implements the
.Xr termios 4
.Fn tcgetattr
call.
.It Dv TIOCSPGRP Fa int *tpgrp
Associate the terminal with the process group (as an integer) pointed to by
.Fa tpgrp .
This is the underlying call that implements the
.Xr termios 4
.Fn tcsetattr
call.
.It Dv TIOCGETA Fa struct termios *term
Place the current value of the termios state associated with the
device in the termios structure pointed to by
.Fa term .
This is the underlying call that implements the
.Xr termios 4
.Fn tcgetattr
call.
.It Dv TIOCSETA Fa struct termios *term
Set the termios state associated with the device immediatly.
This is the underlying call that implements the
.Xr termios 4
.Fn tcsetattr
call with the
.Dv TCSANOW
option.
.It Dv TIOCSETAW Fa struct termios *term
First wait for any output to complete, then set the termios state
associated with the device.
This is the underlying call that implements the
.Xr termios 4
.Fn tcsetattr
call with the
.Dv TCSADRAIN
option.
.It Dv TIOCSETAF Fa struct termios *term
First wait for any output to complete, clear any pending input,
then set the termios state associated with the device.
This is the underlying call that implements the
.Xr termios 4
.Fn tcsetattr
call with the
.Dv TCSAFLUSH
option.
.It Dv TIOCOUTQ Fa int *num
Place the current number of characters in the output queue in the
integer pointed to by
.Fa num .
.It Dv TIOCSTI Fa char *cp
Simulate typed input.  Pretend as if the terminal recieved the
character pointed to by
.Fa cp .
.It Dv TIOCNOTTY Fa void
This call is obsolete but left for compatability.  In the past, when
a process that didn't have a controlling terminal (see
.Em The Controlling Terminal
in
.Xr termios 4 )
first opened a terminal device, it acquired that terminal as its
controlling terminal.  For some programs this was a hazard as they
didn't want a controlling terminal in the first place, and this
provided a mechanism to disassociate the controlling terminal from
the calling process.  It
.Em must
be called by opening the file
.Pa /dev/tty
and calling
.Dv TIOCNOTTY
on that file descriptor.
.Pp
The current system does not allocate a controlling terminal to
a process on an
.Fn open
call: there is a specific ioctl called
.Dv TIOSCTTY
to make a terminal the controlling
terminal.
In addition, a program can
.Fn fork
and call the
.Fn setsid
system call which will place the process into its own session - which
has the effect of disassociating it from the controlling terminal.  This
is the new and prefered method for programs to lose their controlling
terminal.
.It Dv TIOCSTOP Fa void
Stop output on the terminal (like typing ^S at the keyboard).
.It Dv TIOCSTART Fa void
Start output on the terminal (like typing ^Q at the kayboard).
.It Dv TIOCSCTTY Fa void
Make the terminal the controlling terminal for the process (the process
must not currently have a controlling terminal).
.It Dv TIOCDRAIN Fa void
Wait until all output is drained.
.It Dv TIOCEXCL Fa void
Set exclusive use on the terminal.  No further opens are permitted
except by root.  Of course, this means that programs that are run by
root (or setuid) will not obey the exclusive setting - which limits
the usefullness of this feature.
.It Dv TIOCNXCL Fa void
Clear exclusive use of the terminal.  Further opens are permitted.
.It Dv TIOCFLUSH Fa int *what
If the value of the int pointed to by
.Fa what
contains the
.Dv FREAD
bit as defined in
.Pa Aq sys/file.h ,
then all characters in the input queue are cleared.  If it contains
the
.Dv FWRITE
bit, then all characters in the output queue are cleared.  If the
value of the integer is zero, then it behaves as if both the
.Dv FREAD
and
.Dv FWRITE
bits were set (i.e. clears both queues).
.It Dv TIOCGWINSZ Fa struct winsize *ws
Put the window size information associated with the terminal in the
.Va winsize
structure pointed to by
.Fa ws .
The window size structure contains the number of rows and columns (and pixels
if appropiate) of the devices attached to the terminal.  It is set by user software
and is the means by which most full\&-screen oriented programs determine the
screen size.  The
.Va winsize
structure is defined in
.Pa Aq sys/ioctl.h .
.It Dv TIOCSWINSZ Fa struct winsize *ws
Set the window size associated with the terminal to be the value in
the
.Va winsize
structure pointed to by
.Fa ws
(see above).
.It Dv TIOCCONS Fa int *on
If
.Fa on
points to a non-zero integer, redirect kernel console output (kernel printf's)
to this terminal.
If
.Fa on
points to a zero integer, redirect kernel console output back to the normal
console.  This is usually used on workstations to redirect kernel messages
to a particular window.
.It Dv TIOCMSET Fa int *state
The integer pointed to by
.Fa state
contains bits that correspond to modem state.  Following is a list
of defined variables and the modem state they represent:
.Pp
.Bl -tag -width TIOCMXCTS -compact
.It TIOCM_LE
Line Enable.
.It TIOCM_DTR
Data Terminal Ready.
.It TIOCM_RTS
Request To Send.
.It TIOCM_ST
Secondary Transmit.
.It TIOCM_SR
Secondary Recieve.
.It TIOCM_CTS
Clear To Send.
.It TIOCM_CAR
Carrier Detect.
.It TIOCM_CD
Carier Detect (synonym).
.It TIOCM_RNG
Ring Indication.
.It TIOCM_RI
Ring Indication (synonym).
.It TIOCM_DSR
Data Set Ready.
.El
.Pp
This call sets the terminal modem state to that represented by
.Fa state .
Not all terminals may support this.
.It Dv TIOCMGET Fa int *state
Return the current state of the terminal modem lines as represented
above in the integer pointed to by
.Fa state .
.It Dv TIOCMBIS Fa int *state
The bits in the integer pointed to by
.Fa state
represent modem state as described above, however the state is OR-ed
in with the current state.
.It Dv TIOCMBIC Fa int *state
The bits in the integer pointed to by
.Fa state
represent modem state as described above, however each bit which is on
in
.Fa state
is cleared in the terminal.
.El
.Sh SEE ALSO
.Xr getty 8 ,
.Xr ioctl 2 ,
.Xr pty 4 ,
.Xr stty 1 ,
.Xr termios 4