xref: /dflybsd-src/sys/dev/drm/drm_encoder_slave.c (revision a85cb24f18e3804e75ab8bcda7692564d0563317)

/*
 * Copyright (C) 2009 Francisco Jerez.
 * All Rights Reserved.
 *
 * Permission is hereby granted, free of charge, to any person obtaining
 * a copy of this software and associated documentation files (the
 * "Software"), to deal in the Software without restriction, including
 * without limitation the rights to use, copy, modify, merge, publish,
 * distribute, sublicense, and/or sell copies of the Software, and to
 * permit persons to whom the Software is furnished to do so, subject to
 * the following conditions:
 *
 * The above copyright notice and this permission notice (including the
 * next paragraph) shall be included in all copies or substantial
 * portions of the Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
 * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
 * IN NO EVENT SHALL THE COPYRIGHT OWNER(S) AND/OR ITS SUPPLIERS BE
 * LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION
 * OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION
 * WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
 *
 */

#include <linux/module.h>

#include <drm/drm_encoder_slave.h>

#if 0
/**
 * drm_i2c_encoder_init - Initialize an I2C slave encoder
 * @dev:	DRM device.
 * @encoder:    Encoder to be attached to the I2C device. You aren't
 *		required to have called drm_encoder_init() before.
 * @adap:	I2C adapter that will be used to communicate with
 *		the device.
 * @info:	Information that will be used to create the I2C device.
 *		Required fields are @addr and @type.
 *
 * Create an I2C device on the specified bus (the module containing its
 * driver is transparently loaded) and attach it to the specified
 * &drm_encoder_slave. The @slave_funcs field will be initialized with
 * the hooks provided by the slave driver.
 *
 * If @info.platform_data is non-NULL it will be used as the initial
 * slave config.
 *
 * Returns 0 on success or a negative errno on failure, in particular,
 * -ENODEV is returned when no matching driver is found.
 */
int drm_i2c_encoder_init(struct drm_device *dev,
			 struct drm_encoder_slave *encoder,
			 struct i2c_adapter *adap,
			 const struct i2c_board_info *info)
{
	struct module *module = NULL;
	struct i2c_client *client;
	struct drm_i2c_encoder_driver *encoder_drv;
	int err = 0;

	request_module("%s%s", I2C_MODULE_PREFIX, info->type);

	client = i2c_new_device(adap, info);
	if (!client) {
		err = -ENOMEM;
		goto fail;
	}

	if (!client->dev.driver) {
		err = -ENODEV;
		goto fail_unregister;
	}

	module = client->dev.driver->owner;
	if (!try_module_get(module)) {
		err = -ENODEV;
		goto fail_unregister;
	}

	encoder->bus_priv = client;

	encoder_drv = to_drm_i2c_encoder_driver(to_i2c_driver(client->dev.driver));

	err = encoder_drv->encoder_init(client, dev, encoder);
	if (err)
		goto fail_unregister;

	if (info->platform_data)
		encoder->slave_funcs->set_config(&encoder->base,
						 info->platform_data);

	return 0;

fail_unregister:
	i2c_unregister_device(client);
	module_put(module);
fail:
	return err;
}
EXPORT_SYMBOL(drm_i2c_encoder_init);

/**
 * drm_i2c_encoder_destroy - Unregister the I2C device backing an encoder
 * @drm_encoder:	Encoder to be unregistered.
 *
 * This should be called from the @destroy method of an I2C slave
 * encoder driver once I2C access is no longer needed.
 */
void drm_i2c_encoder_destroy(struct drm_encoder *drm_encoder)
{
	struct drm_encoder_slave *encoder = to_encoder_slave(drm_encoder);
	struct i2c_client *client = drm_i2c_encoder_get_client(drm_encoder);
	struct module *module = client->dev.driver->owner;

	i2c_unregister_device(client);
	encoder->bus_priv = NULL;

	module_put(module);
}
EXPORT_SYMBOL(drm_i2c_encoder_destroy);
#endif

/*
 * Wrapper fxns which can be plugged in to drm_encoder_helper_funcs:
 */

static inline const struct drm_encoder_slave_funcs *
get_slave_funcs(struct drm_encoder *enc)
{
	return to_encoder_slave(enc)->slave_funcs;
}

void drm_i2c_encoder_dpms(struct drm_encoder *encoder, int mode)
{
	get_slave_funcs(encoder)->dpms(encoder, mode);
}
EXPORT_SYMBOL(drm_i2c_encoder_dpms);

bool drm_i2c_encoder_mode_fixup(struct drm_encoder *encoder,
		const struct drm_display_mode *mode,
		struct drm_display_mode *adjusted_mode)
{
	if (!get_slave_funcs(encoder)->mode_fixup)
		return true;

	return get_slave_funcs(encoder)->mode_fixup(encoder, mode, adjusted_mode);
}
EXPORT_SYMBOL(drm_i2c_encoder_mode_fixup);

void drm_i2c_encoder_prepare(struct drm_encoder *encoder)
{
	drm_i2c_encoder_dpms(encoder, DRM_MODE_DPMS_OFF);
}
EXPORT_SYMBOL(drm_i2c_encoder_prepare);

void drm_i2c_encoder_commit(struct drm_encoder *encoder)
{
	drm_i2c_encoder_dpms(encoder, DRM_MODE_DPMS_ON);
}
EXPORT_SYMBOL(drm_i2c_encoder_commit);

void drm_i2c_encoder_mode_set(struct drm_encoder *encoder,
		struct drm_display_mode *mode,
		struct drm_display_mode *adjusted_mode)
{
	get_slave_funcs(encoder)->mode_set(encoder, mode, adjusted_mode);
}
EXPORT_SYMBOL(drm_i2c_encoder_mode_set);

enum drm_connector_status drm_i2c_encoder_detect(struct drm_encoder *encoder,
	    struct drm_connector *connector)
{
	return get_slave_funcs(encoder)->detect(encoder, connector);
}
EXPORT_SYMBOL(drm_i2c_encoder_detect);

void drm_i2c_encoder_save(struct drm_encoder *encoder)
{
	get_slave_funcs(encoder)->save(encoder);
}
EXPORT_SYMBOL(drm_i2c_encoder_save);

void drm_i2c_encoder_restore(struct drm_encoder *encoder)
{
	get_slave_funcs(encoder)->restore(encoder);
}
EXPORT_SYMBOL(drm_i2c_encoder_restore);