1 /* $NetBSD: cs89x0.c,v 1.56 2025/01/07 20:24:10 andvar Exp $ */ 2 3 /* 4 * Copyright (c) 2004 Christopher Gilbert 5 * All rights reserved. 6 * 7 * 1. Redistributions of source code must retain the above copyright 8 * notice, this list of conditions and the following disclaimer. 9 * 2. Redistributions in binary form must reproduce the above copyright 10 * notice, this list of conditions and the following disclaimer in the 11 * documentation and/or other materials provided with the distribution. 12 * 3. The name of the company nor the name of the author may be used to 13 * endorse or promote products derived from this software without specific 14 * prior written permission. 15 * 16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED 17 * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF 18 * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. 19 * IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, 20 * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 21 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR 22 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) 23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT 24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY 25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF 26 * SUCH DAMAGE. 27 */ 28 29 /* 30 * Copyright 1997 31 * Digital Equipment Corporation. All rights reserved. 32 * 33 * This software is furnished under license and may be used and 34 * copied only in accordance with the following terms and conditions. 35 * Subject to these conditions, you may download, copy, install, 36 * use, modify and distribute this software in source and/or binary 37 * form. No title or ownership is transferred hereby. 38 * 39 * 1) Any source code used, modified or distributed must reproduce 40 * and retain this copyright notice and list of conditions as 41 * they appear in the source file. 42 * 43 * 2) No right is granted to use any trade name, trademark, or logo of 44 * Digital Equipment Corporation. Neither the "Digital Equipment 45 * Corporation" name nor any trademark or logo of Digital Equipment 46 * Corporation may be used to endorse or promote products derived 47 * from this software without the prior written permission of 48 * Digital Equipment Corporation. 49 * 50 * 3) This software is provided "AS-IS" and any express or implied 51 * warranties, including but not limited to, any implied warranties 52 * of merchantability, fitness for a particular purpose, or 53 * non-infringement are disclaimed. In no event shall DIGITAL be 54 * liable for any damages whatsoever, and in particular, DIGITAL 55 * shall not be liable for special, indirect, consequential, or 56 * incidental damages or damages for lost profits, loss of 57 * revenue or loss of use, whether such damages arise in contract, 58 * negligence, tort, under statute, in equity, at law or otherwise, 59 * even if advised of the possibility of such damage. 60 */ 61 62 /* 63 **++ 64 ** FACILITY 65 ** 66 ** Device Driver for the Crystal CS8900 ISA Ethernet Controller. 67 ** 68 ** ABSTRACT 69 ** 70 ** This module provides standard ethernet access for INET protocols 71 ** only. 72 ** 73 ** AUTHORS 74 ** 75 ** Peter Dettori SEA - Software Engineering. 76 ** 77 ** CREATION DATE: 78 ** 79 ** 13-Feb-1997. 80 ** 81 ** MODIFICATION HISTORY (Digital): 82 ** 83 ** Revision 1.27 1998/01/20 17:59:40 cgd 84 ** update for moved headers 85 ** 86 ** Revision 1.26 1998/01/12 19:29:36 cgd 87 ** use arm32/isa versions of isadma code. 88 ** 89 ** Revision 1.25 1997/12/12 01:35:27 cgd 90 ** convert to use new arp code (from Brini) 91 ** 92 ** Revision 1.24 1997/12/10 22:31:56 cgd 93 ** trim some fat (get rid of ability to explicitly supply enet addr, since 94 ** it was never used and added a bunch of code which really doesn't belong in 95 ** an enet driver), and clean up slightly. 96 ** 97 ** Revision 1.23 1997/10/06 16:42:12 cgd 98 ** copyright notices 99 ** 100 ** Revision 1.22 1997/06/20 19:38:01 chaiken 101 ** fixes some smartcard problems 102 ** 103 ** Revision 1.21 1997/06/10 02:56:20 grohn 104 ** Added call to ledNetActive 105 ** 106 ** Revision 1.20 1997/06/05 00:47:06 dettori 107 ** Changed cs_process_rx_dma to reset and re-initialise the 108 ** ethernet chip when DMA gets out of sync, or mbufs 109 ** can't be allocated. 110 ** 111 ** Revision 1.19 1997/06/03 03:09:58 dettori 112 ** Turn off sc_txbusy flag when a transmit underrun 113 ** occurs. 114 ** 115 ** Revision 1.18 1997/06/02 00:04:35 dettori 116 ** redefined the transmit table to get around the nfs_timer bug while we are 117 ** looking into it further. 118 ** 119 ** Also changed interrupts from EDGE to LEVEL. 120 ** 121 ** Revision 1.17 1997/05/27 23:31:01 dettori 122 ** Pulled out changes to DMAMODE defines. 123 ** 124 ** Revision 1.16 1997/05/23 04:25:16 cgd 125 ** reformat log so it fits in 80cols 126 ** 127 ** Revision 1.15 1997/05/23 04:22:18 cgd 128 ** remove the existing copyright notice (which Peter Dettori indicated 129 ** was incorrect, copied from an existing NetBSD file only so that the 130 ** file would have a copyright notice on it, and which he'd intended to 131 ** replace). Replace it with a Digital copyright notice, cloned from 132 ** ess.c. It's not really correct either (it indicates that the source 133 ** is Digital confidential!), but is better than nothing and more 134 ** correct than what was there before. 135 ** 136 ** Revision 1.14 1997/05/23 04:12:50 cgd 137 ** use an adaptive transmit start algorithm: start by telling the chip 138 ** to start transmitting after 381 bytes have been fed to it. if that 139 ** gets transmit underruns, ramp down to 1021 bytes then "whole 140 ** packet." If successful at a given level for a while, try the next 141 ** more aggressive level. This code doesn't ever try to start 142 ** transmitting after 5 bytes have been sent to the NIC, because 143 ** that underruns rather regularly. The back-off and ramp-up mechanism 144 ** could probably be tuned a little bit, but this works well enough to 145 ** support > 1MB/s transmit rates on a clear ethernet (which is about 146 ** 20-25% better than the driver had previously been getting). 147 ** 148 ** Revision 1.13 1997/05/22 21:06:54 cgd 149 ** redo cs_copy_tx_frame() from scratch. It had a fatal flaw: it was blindly 150 ** casting from uint8_t * to uint16_t * without worrying about alignment 151 ** issues. This would cause bogus data to be spit out for mbufs with 152 ** misaligned data. For instance, it caused the following bits to appear 153 ** on the wire: 154 ** ... etBND 1S2C .SHA(K) R ... 155 ** 11112222333344445555 156 ** which should have appeared as: 157 ** ... NetBSD 1.2C (SHARK) ... 158 ** 11112222333344445555 159 ** Note the apparent 'rotate' of the bytes in the word, which was due to 160 ** incorrect unaligned accesses. This data corruption was the cause of 161 ** incoming telnet/rlogin hangs. 162 ** 163 ** Revision 1.12 1997/05/22 01:55:32 cgd 164 ** reformat log so it fits in 80cols 165 ** 166 ** Revision 1.11 1997/05/22 01:50:27 cgd 167 ** * enable input packet address checking in the BPF+IFF_PROMISCUOUS case, 168 ** so packets aimed at other hosts don't get sent to ether_input(). 169 ** * Add a static const char *rcsid initialized with an RCS Id tag, so that 170 ** you can easily tell (`strings`) what version of the driver is in your 171 ** kernel binary. 172 ** * get rid of ether_cmp(). It was inconsistently used, not necessarily 173 ** safe, and not really a performance win anyway. (It was only used when 174 ** setting up the multicast logical address filter, which is an 175 ** infrequent event. It could have been used in the IFF_PROMISCUOUS 176 ** address check above, but the benefit of it vs. memcmp would be 177 ** inconsequential, there.) Use memcmp() instead. 178 ** * restructure csStartOutput to avoid the following bugs in the case where 179 ** txWait was being set: 180 ** * it would accidentally drop the outgoing packet if told to wait 181 ** but the outgoing packet queue was empty. 182 ** * it would bpf_mtap() the outgoing packet multiple times (once for 183 ** each time it was told to wait), and would also recalculate 184 ** the length of the outgoing packet each time it was told to 185 ** wait. 186 ** While there, rename txWait to txLoop, since with the new structure of 187 ** the code, the latter name makes more sense. 188 ** 189 ** Revision 1.10 1997/05/19 02:03:20 cgd 190 ** Set RX_CTL in cs_set_ladr_filt(), rather than cs_initChip(). cs_initChip() 191 ** is the only caller of cs_set_ladr_filt(), and always calls it, so this 192 ** ends up being logically the same. In cs_set_ladr_filt(), if IFF_PROMISC 193 ** is set, enable promiscuous mode (and set IFF_ALLMULTI), otherwise behave 194 ** as before. 195 ** 196 ** Revision 1.9 1997/05/19 01:45:37 cgd 197 ** create a new function, cs_ether_input(), which does received-packet 198 ** BPF and ether_input processing. This code used to be in three places, 199 ** and centralizing it will make adding IFF_PROMISC support much easier. 200 ** Also, in cs_copy_tx_frame(), put it some (currently disabled) code to 201 ** do copies with bus_space_write_region_2(). It's more correct, and 202 ** potentially more efficient. That function needs to be gutted (to 203 ** deal properly with alignment issues, which it currently does wrong), 204 ** however, and the change doesn't gain much, so there's no point in 205 ** enabling it now. 206 ** 207 ** Revision 1.8 1997/05/19 01:17:10 cgd 208 ** fix a comment re: the setting of the TxConfig register. Clean up 209 ** interface counter maintenance (make it use standard idiom). 210 ** 211 **-- 212 */ 213 214 #include <sys/cdefs.h> 215 __KERNEL_RCSID(0, "$NetBSD: cs89x0.c,v 1.56 2025/01/07 20:24:10 andvar Exp $"); 216 217 #include "opt_inet.h" 218 219 #include <sys/param.h> 220 #include <sys/systm.h> 221 #include <sys/mbuf.h> 222 #include <sys/syslog.h> 223 #include <sys/socket.h> 224 #include <sys/device.h> 225 #include <sys/malloc.h> 226 #include <sys/ioctl.h> 227 #include <sys/errno.h> 228 #include <sys/bus.h> 229 #include <sys/intr.h> 230 #include <sys/rndsource.h> 231 232 #include <net/if.h> 233 #include <net/if_ether.h> 234 #include <net/if_media.h> 235 #include <net/bpf.h> 236 237 #ifdef INET 238 #include <netinet/in.h> 239 #include <netinet/if_inarp.h> 240 #endif 241 242 #include <dev/ic/cs89x0reg.h> 243 #include <dev/ic/cs89x0var.h> 244 245 #ifdef SHARK 246 #include <shark/shark/sequoia.h> 247 #endif 248 249 /* 250 * MACRO DEFINITIONS 251 */ 252 #define CS_OUTPUT_LOOP_MAX 100 /* max times round notorious tx loop */ 253 254 /* 255 * FUNCTION PROTOTYPES 256 */ 257 static void cs_get_default_media(struct cs_softc *); 258 static int cs_get_params(struct cs_softc *); 259 static int cs_get_enaddr(struct cs_softc *); 260 static int cs_reset_chip(struct cs_softc *); 261 static void cs_reset(struct cs_softc *); 262 static int cs_ioctl(struct ifnet *, u_long, void *); 263 static void cs_initChip(struct cs_softc *); 264 static void cs_buffer_event(struct cs_softc *, uint16_t); 265 static void cs_transmit_event(struct cs_softc *, uint16_t); 266 static void cs_receive_event(struct cs_softc *, uint16_t); 267 static void cs_process_receive(struct cs_softc *); 268 static void cs_process_rx_early(struct cs_softc *); 269 static void cs_start_output(struct ifnet *); 270 static void cs_copy_tx_frame(struct cs_softc *, struct mbuf *); 271 static void cs_set_ladr_filt(struct cs_softc *, struct ethercom *); 272 static uint16_t cs_hash_index(char *); 273 static void cs_counter_event(struct cs_softc *, uint16_t); 274 275 static int cs_mediachange(struct ifnet *); 276 static void cs_mediastatus(struct ifnet *, struct ifmediareq *); 277 278 static bool cs_shutdown(device_t, int); 279 static int cs_enable(struct cs_softc *); 280 static void cs_disable(struct cs_softc *); 281 static void cs_stop(struct ifnet *, int); 282 static int cs_scan_eeprom(struct cs_softc *); 283 static int cs_read_pktpg_from_eeprom(struct cs_softc *, int, uint16_t *); 284 285 286 /* 287 * GLOBAL DECLARATIONS 288 */ 289 290 /* 291 * Xmit-early table. 292 * 293 * To get better performance, we tell the chip to start packet 294 * transmission before the whole packet is copied to the chip. 295 * However, this can fail under load. When it fails, we back off 296 * to a safer setting for a little while. 297 * 298 * txcmd is the value of txcmd used to indicate when to start transmission. 299 * better is the next 'better' state in the table. 300 * better_count is the number of output packets before transition to the 301 * better state. 302 * worse is the next 'worse' state in the table. 303 * 304 * Transition to the next worse state happens automatically when a 305 * transmission underrun occurs. 306 */ 307 struct cs_xmit_early { 308 uint16_t txcmd; 309 int better; 310 int better_count; 311 int worse; 312 } cs_xmit_early_table[3] = { 313 { TX_CMD_START_381, 0, INT_MAX, 1, }, 314 { TX_CMD_START_1021, 0, 50000, 2, }, 315 { TX_CMD_START_ALL, 1, 5000, 2, }, 316 }; 317 318 int cs_default_media[] = { 319 IFM_ETHER | IFM_10_2, 320 IFM_ETHER | IFM_10_5, 321 IFM_ETHER | IFM_10_T, 322 IFM_ETHER | IFM_10_T | IFM_FDX, 323 }; 324 int cs_default_nmedia = __arraycount(cs_default_media); 325 326 int 327 cs_attach(struct cs_softc *sc, uint8_t *enaddr, int *media, 328 int nmedia, int defmedia) 329 { 330 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 331 const char *chipname, *medname; 332 uint16_t reg; 333 int i; 334 335 /* Start out in IO mode */ 336 sc->sc_memorymode = FALSE; 337 338 /* Make sure we're right */ 339 for (i = 0; i < 10000; i++) { 340 reg = CS_READ_PACKET_PAGE(sc, PKTPG_EISA_NUM); 341 if (reg == EISA_NUM_CRYSTAL) 342 break; 343 } 344 if (i == 10000) { 345 aprint_error_dev(sc->sc_dev, "wrong id(0x%x)\n", reg); 346 return 1; /* XXX should panic? */ 347 } 348 349 reg = CS_READ_PACKET_PAGE(sc, PKTPG_PRODUCT_ID); 350 sc->sc_prodid = reg & PROD_ID_MASK; 351 sc->sc_prodrev = (reg & PROD_REV_MASK) >> 8; 352 353 switch (sc->sc_prodid) { 354 case PROD_ID_CS8900: 355 chipname = "CS8900"; 356 break; 357 case PROD_ID_CS8920: 358 chipname = "CS8920"; 359 break; 360 case PROD_ID_CS8920M: 361 chipname = "CS8920M"; 362 break; 363 default: 364 panic("cs_attach: impossible"); 365 } 366 367 /* 368 * The first thing to do is check that the mbuf cluster size is 369 * greater than the MTU for an ethernet frame. The code depends on 370 * this and to port this to a OS where this was not the case would 371 * not be straightforward. 372 * 373 * We need 1 byte spare because our packet read loop can overrun. 374 * and we may need pad bytes to align ip header. 375 */ 376 if (MCLBYTES < ETHER_MAX_LEN + 1 + ALIGN(sizeof(struct ether_header)) 377 - sizeof(struct ether_header)) { 378 printf("%s: MCLBYTES too small for Ethernet frame\n", 379 device_xname(sc->sc_dev)); 380 return 1; 381 } 382 383 /* Start out not transmitting */ 384 sc->sc_txbusy = FALSE; 385 386 /* Set up early transmit threshold */ 387 sc->sc_xe_ent = 0; 388 sc->sc_xe_togo = cs_xmit_early_table[sc->sc_xe_ent].better_count; 389 390 /* Initialize ifnet structure. */ 391 strlcpy(ifp->if_xname, device_xname(sc->sc_dev), IFNAMSIZ); 392 ifp->if_softc = sc; 393 ifp->if_start = cs_start_output; 394 ifp->if_init = cs_init; 395 ifp->if_ioctl = cs_ioctl; 396 ifp->if_stop = cs_stop; 397 ifp->if_watchdog = NULL; /* No watchdog at this stage */ 398 ifp->if_flags = IFF_SIMPLEX | IFF_BROADCAST | IFF_MULTICAST; 399 IFQ_SET_READY(&ifp->if_snd); 400 401 /* Initialize ifmedia structures. */ 402 sc->sc_ethercom.ec_ifmedia = &sc->sc_media; 403 ifmedia_init(&sc->sc_media, 0, cs_mediachange, cs_mediastatus); 404 405 if (media != NULL) { 406 for (i = 0; i < nmedia; i++) 407 ifmedia_add(&sc->sc_media, media[i], 0, NULL); 408 ifmedia_set(&sc->sc_media, defmedia); 409 } else { 410 for (i = 0; i < cs_default_nmedia; i++) 411 ifmedia_add(&sc->sc_media, cs_default_media[i], 412 0, NULL); 413 cs_get_default_media(sc); 414 } 415 416 if (sc->sc_cfgflags & CFGFLG_PARSE_EEPROM) { 417 if (cs_scan_eeprom(sc) == CS_ERROR) { 418 /* 419 * Failed to scan the eeprom, pretend there isn't an 420 * eeprom 421 */ 422 aprint_error_dev(sc->sc_dev, 423 "unable to scan EEPROM\n"); 424 sc->sc_cfgflags |= CFGFLG_NOT_EEPROM; 425 } 426 } 427 428 if ((sc->sc_cfgflags & CFGFLG_NOT_EEPROM) == 0) { 429 /* Get parameters from the EEPROM */ 430 if (cs_get_params(sc) == CS_ERROR) { 431 aprint_error_dev(sc->sc_dev, 432 "unable to get settings from EEPROM\n"); 433 return 1; 434 } 435 } 436 437 if (enaddr != NULL) 438 memcpy(sc->sc_enaddr, enaddr, sizeof(sc->sc_enaddr)); 439 else if ((sc->sc_cfgflags & CFGFLG_NOT_EEPROM) == 0) { 440 /* Get and store the Ethernet address */ 441 if (cs_get_enaddr(sc) == CS_ERROR) { 442 aprint_error_dev(sc->sc_dev, 443 "unable to read Ethernet address\n"); 444 return 1; 445 } 446 } else { 447 #if 1 448 int j; 449 uint v; 450 451 for (j = 0; j < 6; j += 2) { 452 v = CS_READ_PACKET_PAGE(sc, PKTPG_IND_ADDR + j); 453 sc->sc_enaddr[j + 0] = v; 454 sc->sc_enaddr[j + 1] = v >> 8; 455 } 456 #else 457 printf("%s: no Ethernet address!\n", device_xname(sc->sc_dev)); 458 return 1; 459 #endif 460 } 461 462 switch (IFM_SUBTYPE(sc->sc_media.ifm_cur->ifm_media)) { 463 case IFM_10_2: 464 medname = "BNC"; 465 break; 466 case IFM_10_5: 467 medname = "AUI"; 468 break; 469 case IFM_10_T: 470 if (sc->sc_media.ifm_cur->ifm_media & IFM_FDX) 471 medname = "UTP <full-duplex>"; 472 else 473 medname = "UTP"; 474 break; 475 default: 476 panic("cs_attach: impossible"); 477 } 478 printf("%s: %s rev. %c, address %s, media %s\n", 479 device_xname(sc->sc_dev), 480 chipname, sc->sc_prodrev + 'A', ether_sprintf(sc->sc_enaddr), 481 medname); 482 483 if (sc->sc_dma_attach) 484 (*sc->sc_dma_attach)(sc); 485 486 /* Attach the interface. */ 487 if_attach(ifp); 488 if_deferred_start_init(ifp, NULL); 489 ether_ifattach(ifp, sc->sc_enaddr); 490 491 rnd_attach_source(&sc->rnd_source, device_xname(sc->sc_dev), 492 RND_TYPE_NET, RND_FLAG_DEFAULT); 493 sc->sc_cfgflags |= CFGFLG_ATTACHED; 494 495 if (pmf_device_register1(sc->sc_dev, NULL, NULL, cs_shutdown)) 496 pmf_class_network_register(sc->sc_dev, ifp); 497 else 498 aprint_error_dev(sc->sc_dev, 499 "couldn't establish power handler\n"); 500 501 /* Reset the chip */ 502 if (cs_reset_chip(sc) == CS_ERROR) { 503 aprint_error_dev(sc->sc_dev, "reset failed\n"); 504 cs_detach(sc); 505 return 1; 506 } 507 508 return 0; 509 } 510 511 int 512 cs_detach(struct cs_softc *sc) 513 { 514 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 515 516 if (sc->sc_cfgflags & CFGFLG_ATTACHED) { 517 rnd_detach_source(&sc->rnd_source); 518 ether_ifdetach(ifp); 519 if_detach(ifp); 520 ifmedia_fini(&sc->sc_media); 521 sc->sc_cfgflags &= ~CFGFLG_ATTACHED; 522 } 523 524 #if 0 525 /* XXX not necessary */ 526 if (sc->sc_cfgflags & CFGFLG_DMA_MODE) { 527 isa_dmamem_unmap(sc->sc_ic, sc->sc_drq, sc->sc_dmabase, 528 sc->sc_dmasize); 529 isa_dmamem_free(sc->sc_ic, sc->sc_drq, sc->sc_dmaaddr, 530 sc->sc_dmasize); 531 isa_dmamap_destroy(sc->sc_ic, sc->sc_drq); 532 sc->sc_cfgflags &= ~CFGFLG_DMA_MODE; 533 } 534 #endif 535 536 pmf_device_deregister(sc->sc_dev); 537 538 return 0; 539 } 540 541 bool 542 cs_shutdown(device_t self, int howto) 543 { 544 struct cs_softc *sc; 545 546 sc = device_private(self); 547 cs_reset(sc); 548 549 return true; 550 } 551 552 void 553 cs_get_default_media(struct cs_softc *sc) 554 { 555 uint16_t adp_cfg, xmit_ctl; 556 557 if (cs_verify_eeprom(sc) == CS_ERROR) { 558 aprint_error_dev(sc->sc_dev, 559 "cs_get_default_media: EEPROM missing or bad\n"); 560 goto fakeit; 561 } 562 563 if (cs_read_eeprom(sc, EEPROM_ADPTR_CFG, &adp_cfg) == CS_ERROR) { 564 aprint_error_dev(sc->sc_dev, 565 "unable to read adapter config from EEPROM\n"); 566 goto fakeit; 567 } 568 569 if (cs_read_eeprom(sc, EEPROM_XMIT_CTL, &xmit_ctl) == CS_ERROR) { 570 aprint_error_dev(sc->sc_dev, 571 "unable to read transmit control from EEPROM\n"); 572 goto fakeit; 573 } 574 575 switch (adp_cfg & ADPTR_CFG_MEDIA) { 576 case ADPTR_CFG_AUI: 577 ifmedia_set(&sc->sc_media, IFM_ETHER | IFM_10_5); 578 break; 579 case ADPTR_CFG_10BASE2: 580 ifmedia_set(&sc->sc_media, IFM_ETHER | IFM_10_2); 581 break; 582 case ADPTR_CFG_10BASET: 583 default: 584 if (xmit_ctl & XMIT_CTL_FDX) 585 ifmedia_set(&sc->sc_media, IFM_ETHER | IFM_10_T 586 | IFM_FDX); 587 else 588 ifmedia_set(&sc->sc_media, IFM_ETHER | IFM_10_T); 589 break; 590 } 591 return; 592 593 fakeit: 594 aprint_error_dev(sc->sc_dev, 595 "WARNING: default media setting may be inaccurate\n"); 596 /* XXX Arbitrary... */ 597 ifmedia_set(&sc->sc_media, IFM_ETHER | IFM_10_T); 598 } 599 600 /* 601 * cs_scan_eeprom 602 * 603 * Attempt to take a complete copy of the eeprom into main memory. 604 * this will allow faster parsing of the eeprom data. 605 * 606 * Only tested against a 8920M's eeprom, but the data sheet for the 607 * 8920A indicates that is uses the same layout. 608 */ 609 int 610 cs_scan_eeprom(struct cs_softc *sc) 611 { 612 uint16_t result; 613 int i; 614 int eeprom_size; 615 uint8_t checksum = 0; 616 617 if (cs_verify_eeprom(sc) == CS_ERROR) { 618 aprint_error_dev(sc->sc_dev, 619 "cs_scan_params: EEPROM missing or bad\n"); 620 return CS_ERROR; 621 } 622 623 /* 624 * Read the 0th word from the eeprom, it will tell us the length 625 * and if the eeprom is valid 626 */ 627 cs_read_eeprom(sc, 0, &result); 628 629 /* Check the eeprom signature */ 630 if ((result & 0xE000) != 0xA000) { 631 /* Empty eeprom */ 632 return CS_ERROR; 633 } 634 635 /* 636 * Take the eeprom size (note the read value doesn't include the header 637 * word) 638 */ 639 eeprom_size = (result & 0xff) + 2; 640 641 sc->eeprom_data = malloc(eeprom_size, M_DEVBUF, M_WAITOK); 642 if (sc->eeprom_data == NULL) { 643 /* No memory, treat this as if there's no eeprom */ 644 return CS_ERROR; 645 } 646 647 sc->eeprom_size = eeprom_size; 648 649 /* Read the eeprom into the buffer, also calculate the checksum */ 650 for (i = 0; i < (eeprom_size >> 1); i++) { 651 cs_read_eeprom(sc, i, &(sc->eeprom_data[i])); 652 checksum += (sc->eeprom_data[i] & 0xff00) >> 8; 653 checksum += (sc->eeprom_data[i] & 0x00ff); 654 } 655 656 /* 657 * Validate checksum calculation, the sum of all the bytes should be 0, 658 * as the high byte of the last word is the 2's complement of the 659 * sum to that point. 660 */ 661 if (checksum != 0) { 662 aprint_error_dev(sc->sc_dev, "eeprom checksum failure\n"); 663 return CS_ERROR; 664 } 665 666 return CS_OK; 667 } 668 669 static int 670 cs_read_pktpg_from_eeprom(struct cs_softc *sc, int pktpg, uint16_t *pValue) 671 { 672 int x, maxword; 673 674 /* Check that we have eeprom data */ 675 if ((sc->eeprom_data == NULL) || (sc->eeprom_size < 2)) 676 return CS_ERROR; 677 678 /* 679 * We only want to read the data words, the last word contains the 680 * checksum 681 */ 682 maxword = (sc->eeprom_size - 2) >> 1; 683 684 /* Start 1 word in, as the first word is the length and signature */ 685 x = 1; 686 687 while ( x < (maxword)) { 688 uint16_t header; 689 int group_size; 690 int offset; 691 int offset_max; 692 693 /* Read in the group header word */ 694 header = sc->eeprom_data[x]; 695 x++; /* Skip group header */ 696 697 /* 698 * Size of group in words is in the top 4 bits, note that it 699 * is one less than the number of words 700 */ 701 group_size = header & 0xF000; 702 703 /* 704 * CS8900 Data sheet says this should be 0x01ff, 705 * but my cs8920 eeprom has higher offsets, 706 * perhaps the 8920 allows higher offsets, otherwise 707 * it's writing to places that it shouldn't 708 */ 709 /* Work out the offsets this group covers */ 710 offset = header & 0x0FFF; 711 offset_max = offset + (group_size << 1); 712 713 /* Check if the pkgpg we're after is in this group */ 714 if ((offset <= pktpg) && (pktpg <= offset_max)) { 715 /* The pkgpg value we want is in here */ 716 int eeprom_location; 717 718 eeprom_location = ((pktpg - offset) >> 1) ; 719 720 *pValue = sc->eeprom_data[x + eeprom_location]; 721 return CS_OK; 722 } else { 723 /* Skip this group (+ 1 for first entry) */ 724 x += group_size + 1; 725 } 726 } 727 728 /* 729 * If we've fallen out here then we don't have a value in the EEPROM 730 * for this pktpg so return an error 731 */ 732 return CS_ERROR; 733 } 734 735 int 736 cs_get_params(struct cs_softc *sc) 737 { 738 uint16_t isaConfig; 739 uint16_t adapterConfig; 740 741 if (cs_verify_eeprom(sc) == CS_ERROR) { 742 aprint_error_dev(sc->sc_dev, 743 "cs_get_params: EEPROM missing or bad\n"); 744 return CS_ERROR; 745 } 746 747 if (sc->sc_cfgflags & CFGFLG_PARSE_EEPROM) { 748 /* Get ISA configuration from the EEPROM */ 749 if (cs_read_pktpg_from_eeprom(sc, PKTPG_BUS_CTL, &isaConfig) 750 == CS_ERROR) { 751 /* 752 * Eeprom doesn't have this value, use data sheet 753 * default 754 */ 755 isaConfig = 0x0017; 756 } 757 758 /* Get adapter configuration from the EEPROM */ 759 if (cs_read_pktpg_from_eeprom(sc, PKTPG_SELF_CTL, 760 &adapterConfig) == CS_ERROR) { 761 /* 762 * Eeprom doesn't have this value, use data sheet 763 * default 764 */ 765 adapterConfig = 0x0015; 766 } 767 768 /* Copy the USE_SA flag */ 769 if (isaConfig & BUS_CTL_USE_SA) 770 sc->sc_cfgflags |= CFGFLG_USE_SA; 771 772 /* Copy the IO Channel Ready flag */ 773 if (isaConfig & BUS_CTL_IOCHRDY) 774 sc->sc_cfgflags |= CFGFLG_IOCHRDY; 775 776 /* Copy the DC/DC Polarity flag */ 777 if (adapterConfig & SELF_CTL_HCB1) 778 sc->sc_cfgflags |= CFGFLG_DCDC_POL; 779 } else { 780 /* Get ISA configuration from the EEPROM */ 781 if (cs_read_eeprom(sc, EEPROM_ISA_CFG, &isaConfig) == CS_ERROR) 782 goto eeprom_bad; 783 784 /* Get adapter configuration from the EEPROM */ 785 if (cs_read_eeprom(sc, EEPROM_ADPTR_CFG, &adapterConfig) 786 == CS_ERROR) 787 goto eeprom_bad; 788 789 /* Copy the USE_SA flag */ 790 if (isaConfig & ISA_CFG_USE_SA) 791 sc->sc_cfgflags |= CFGFLG_USE_SA; 792 793 /* Copy the IO Channel Ready flag */ 794 if (isaConfig & ISA_CFG_IOCHRDY) 795 sc->sc_cfgflags |= CFGFLG_IOCHRDY; 796 797 /* Copy the DC/DC Polarity flag */ 798 if (adapterConfig & ADPTR_CFG_DCDC_POL) 799 sc->sc_cfgflags |= CFGFLG_DCDC_POL; 800 } 801 802 return CS_OK; 803 eeprom_bad: 804 aprint_error_dev(sc->sc_dev, 805 "cs_get_params: unable to read from EEPROM\n"); 806 return CS_ERROR; 807 } 808 809 int 810 cs_get_enaddr(struct cs_softc *sc) 811 { 812 uint16_t myea[ETHER_ADDR_LEN / sizeof(uint16_t)]; 813 int i; 814 815 if (cs_verify_eeprom(sc) == CS_ERROR) { 816 aprint_error_dev(sc->sc_dev, 817 "cs_get_enaddr: EEPROM missing or bad\n"); 818 return CS_ERROR; 819 } 820 821 /* Get Ethernet address from the EEPROM */ 822 if (sc->sc_cfgflags & CFGFLG_PARSE_EEPROM) { 823 if (cs_read_pktpg_from_eeprom(sc, PKTPG_IND_ADDR, &myea[0]) 824 == CS_ERROR) 825 goto eeprom_bad; 826 if (cs_read_pktpg_from_eeprom(sc, PKTPG_IND_ADDR + 2, &myea[1]) 827 == CS_ERROR) 828 goto eeprom_bad; 829 if (cs_read_pktpg_from_eeprom(sc, PKTPG_IND_ADDR + 4, &myea[2]) 830 == CS_ERROR) 831 goto eeprom_bad; 832 } else { 833 if (cs_read_eeprom(sc, EEPROM_IND_ADDR_H, &myea[0]) == CS_ERROR) 834 goto eeprom_bad; 835 if (cs_read_eeprom(sc, EEPROM_IND_ADDR_M, &myea[1]) == CS_ERROR) 836 goto eeprom_bad; 837 if (cs_read_eeprom(sc, EEPROM_IND_ADDR_L, &myea[2]) == CS_ERROR) 838 goto eeprom_bad; 839 } 840 841 for (i = 0; i < __arraycount(myea); i++) { 842 sc->sc_enaddr[i * 2 + 0] = myea[i]; 843 sc->sc_enaddr[i * 2 + 1] = myea[i] >> 8; 844 } 845 846 return CS_OK; 847 848 eeprom_bad: 849 aprint_error_dev(sc->sc_dev, 850 "cs_get_enaddr: unable to read from EEPROM\n"); 851 return CS_ERROR; 852 } 853 854 int 855 cs_reset_chip(struct cs_softc *sc) 856 { 857 int intState; 858 int x; 859 860 /* Disable interrupts at the CPU so reset command is atomic */ 861 intState = splnet(); 862 863 /* 864 * We are now resetting the chip 865 * 866 * A spurious interrupt is generated by the chip when it is reset. This 867 * variable informs the interrupt handler to ignore this interrupt. 868 */ 869 sc->sc_resetting = TRUE; 870 871 /* Issue a reset command to the chip */ 872 CS_WRITE_PACKET_PAGE(sc, PKTPG_SELF_CTL, SELF_CTL_RESET); 873 874 /* Re-enable interrupts at the CPU */ 875 splx(intState); 876 877 /* The chip is always in IO mode after a reset */ 878 sc->sc_memorymode = FALSE; 879 880 /* If transmission was in progress, it is not now */ 881 sc->sc_txbusy = FALSE; 882 883 /* 884 * There was a delay(125); here, but it seems unnecessary 125 usec is 885 * 1/8000 of a second, not 1/8 of a second. the data sheet advises 886 * 1/10 of a second here, but the SI_BUSY and INIT_DONE loops below 887 * should be sufficient. 888 */ 889 890 /* Transition SBHE to switch chip from 8-bit to 16-bit */ 891 IO_READ_1(sc, PORT_PKTPG_PTR + 0); 892 IO_READ_1(sc, PORT_PKTPG_PTR + 1); 893 IO_READ_1(sc, PORT_PKTPG_PTR + 0); 894 IO_READ_1(sc, PORT_PKTPG_PTR + 1); 895 896 /* Wait until the EEPROM is not busy */ 897 for (x = 0; x < MAXLOOP; x++) { 898 if (!(CS_READ_PACKET_PAGE(sc, PKTPG_SELF_ST) & SELF_ST_SI_BUSY)) 899 break; 900 } 901 902 if (x == MAXLOOP) 903 return CS_ERROR; 904 905 /* Wait until initialization is done */ 906 for (x = 0; x < MAXLOOP; x++) { 907 if (CS_READ_PACKET_PAGE(sc, PKTPG_SELF_ST) & SELF_ST_INIT_DONE) 908 break; 909 } 910 911 if (x == MAXLOOP) 912 return CS_ERROR; 913 914 /* Reset is no longer in progress */ 915 sc->sc_resetting = FALSE; 916 917 return CS_OK; 918 } 919 920 int 921 cs_verify_eeprom(struct cs_softc *sc) 922 { 923 uint16_t self_status; 924 925 /* Verify that the EEPROM is present and OK */ 926 self_status = CS_READ_PACKET_PAGE_IO(sc, PKTPG_SELF_ST); 927 if (((self_status & SELF_ST_EEP_PRES) && 928 (self_status & SELF_ST_EEP_OK)) == 0) 929 return CS_ERROR; 930 931 return CS_OK; 932 } 933 934 int 935 cs_read_eeprom(struct cs_softc *sc, int offset, uint16_t *pValue) 936 { 937 int x; 938 939 /* Ensure that the EEPROM is not busy */ 940 for (x = 0; x < MAXLOOP; x++) { 941 if (!(CS_READ_PACKET_PAGE_IO(sc, PKTPG_SELF_ST) & 942 SELF_ST_SI_BUSY)) 943 break; 944 } 945 946 if (x == MAXLOOP) 947 return CS_ERROR; 948 949 /* Issue the command to read the offset within the EEPROM */ 950 CS_WRITE_PACKET_PAGE_IO(sc, PKTPG_EEPROM_CMD, 951 offset | EEPROM_CMD_READ); 952 953 /* Wait until the command is completed */ 954 for (x = 0; x < MAXLOOP; x++) { 955 if (!(CS_READ_PACKET_PAGE_IO(sc, PKTPG_SELF_ST) & 956 SELF_ST_SI_BUSY)) 957 break; 958 } 959 960 if (x == MAXLOOP) 961 return CS_ERROR; 962 963 /* Get the EEPROM data from the EEPROM Data register */ 964 *pValue = CS_READ_PACKET_PAGE_IO(sc, PKTPG_EEPROM_DATA); 965 966 return CS_OK; 967 } 968 969 void 970 cs_initChip(struct cs_softc *sc) 971 { 972 uint16_t busCtl; 973 uint16_t selfCtl; 974 uint16_t v; 975 uint16_t isaId; 976 int i; 977 int media = IFM_SUBTYPE(sc->sc_media.ifm_cur->ifm_media); 978 979 /* Disable reception and transmission of frames */ 980 CS_WRITE_PACKET_PAGE(sc, PKTPG_LINE_CTL, 981 CS_READ_PACKET_PAGE(sc, PKTPG_LINE_CTL) & 982 ~LINE_CTL_RX_ON & ~LINE_CTL_TX_ON); 983 984 /* Disable interrupt at the chip */ 985 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL, 986 CS_READ_PACKET_PAGE(sc, PKTPG_BUS_CTL) & ~BUS_CTL_INT_ENBL); 987 988 /* If IOCHRDY is enabled then clear the bit in the busCtl register */ 989 busCtl = CS_READ_PACKET_PAGE(sc, PKTPG_BUS_CTL); 990 if (sc->sc_cfgflags & CFGFLG_IOCHRDY) { 991 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL, 992 busCtl & ~BUS_CTL_IOCHRDY); 993 } else { 994 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL, 995 busCtl | BUS_CTL_IOCHRDY); 996 } 997 998 /* Set the Line Control register to match the media type */ 999 if (media == IFM_10_T) 1000 CS_WRITE_PACKET_PAGE(sc, PKTPG_LINE_CTL, LINE_CTL_10BASET); 1001 else 1002 CS_WRITE_PACKET_PAGE(sc, PKTPG_LINE_CTL, LINE_CTL_AUI_ONLY); 1003 1004 /* 1005 * Set the BSTATUS/HC1 pin to be used as HC1. HC1 is used to 1006 * enable the DC/DC converter 1007 */ 1008 selfCtl = SELF_CTL_HC1E; 1009 1010 /* If the media type is 10Base2 */ 1011 if (media == IFM_10_2) { 1012 /* Enable the DC/DC converter if it has a low enable. */ 1013 if ((sc->sc_cfgflags & CFGFLG_DCDC_POL) == 0) 1014 /* 1015 * Set the HCB1 bit, which causes the HC1 pin to go 1016 * low. 1017 */ 1018 selfCtl |= SELF_CTL_HCB1; 1019 } else { /* Media type is 10BaseT or AUI */ 1020 /* Disable the DC/DC converter if it has a high enable. */ 1021 if ((sc->sc_cfgflags & CFGFLG_DCDC_POL) != 0) { 1022 /* 1023 * Set the HCB1 bit, which causes the HC1 pin to go 1024 * low. 1025 */ 1026 selfCtl |= SELF_CTL_HCB1; 1027 } 1028 } 1029 CS_WRITE_PACKET_PAGE(sc, PKTPG_SELF_CTL, selfCtl); 1030 1031 /* Enable normal link pulse */ 1032 if (sc->sc_prodid == PROD_ID_CS8920 || sc->sc_prodid == PROD_ID_CS8920M) 1033 CS_WRITE_PACKET_PAGE(sc, PKTPG_AUTONEG_CTL, AUTOCTL_NLP_ENABLE); 1034 1035 /* Enable full-duplex, if appropriate */ 1036 if (sc->sc_media.ifm_cur->ifm_media & IFM_FDX) 1037 CS_WRITE_PACKET_PAGE(sc, PKTPG_TEST_CTL, TEST_CTL_FDX); 1038 1039 /* RX_CTL set in cs_set_ladr_filt(), below */ 1040 1041 /* Enable all transmission interrupts */ 1042 CS_WRITE_PACKET_PAGE(sc, PKTPG_TX_CFG, TX_CFG_ALL_IE); 1043 1044 /* Accept all receive interrupts */ 1045 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, RX_CFG_ALL_IE); 1046 1047 /* 1048 * Configure Operational Modes 1049 * 1050 * I have turned off the BUF_CFG_RX_MISS_IE, to speed things up, this 1051 * is a better way to do it because the card has a counter which can be 1052 * read to update the RX_MISS counter. This saves many interrupts. 1053 * 1054 * I have turned on the tx and rx overflow interrupts to counter using 1055 * the receive miss interrupt. This is a better estimate of errors 1056 * and requires lower system overhead. 1057 */ 1058 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUF_CFG, BUF_CFG_TX_UNDR_IE | 1059 BUF_CFG_RX_DMA_IE); 1060 1061 if (sc->sc_dma_chipinit) 1062 (*sc->sc_dma_chipinit)(sc); 1063 1064 /* If memory mode is enabled */ 1065 if (sc->sc_cfgflags & CFGFLG_MEM_MODE) { 1066 /* If external logic is present for address decoding */ 1067 if (CS_READ_PACKET_PAGE(sc, PKTPG_SELF_ST) & SELF_ST_EL_PRES) { 1068 /* 1069 * Program the external logic to decode address bits 1070 * SA20-SA23 1071 */ 1072 CS_WRITE_PACKET_PAGE(sc, PKTPG_EEPROM_CMD, 1073 ((sc->sc_pktpgaddr & 0xffffff) >> 20) | 1074 EEPROM_CMD_ELSEL); 1075 } 1076 1077 /* 1078 * Write the packet page base physical address to the memory 1079 * base register. 1080 */ 1081 CS_WRITE_PACKET_PAGE(sc, PKTPG_MEM_BASE + 0, 1082 sc->sc_pktpgaddr & 0xFFFF); 1083 CS_WRITE_PACKET_PAGE(sc, PKTPG_MEM_BASE + 2, 1084 sc->sc_pktpgaddr >> 16); 1085 busCtl = BUS_CTL_MEM_MODE; 1086 1087 /* Tell the chip to read the addresses off the SA pins */ 1088 if (sc->sc_cfgflags & CFGFLG_USE_SA) { 1089 busCtl |= BUS_CTL_USE_SA; 1090 } 1091 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL, 1092 CS_READ_PACKET_PAGE(sc, PKTPG_BUS_CTL) | busCtl); 1093 1094 /* We are in memory mode now! */ 1095 sc->sc_memorymode = TRUE; 1096 1097 /* 1098 * Wait here (10ms) for the chip to swap over. this is the 1099 * maximum time that this could take. 1100 */ 1101 delay(10000); 1102 1103 /* Verify that we can read from the chip */ 1104 isaId = CS_READ_PACKET_PAGE(sc, PKTPG_EISA_NUM); 1105 1106 /* 1107 * As a last minute sanity check before actually using mapped 1108 * memory we verify that we can read the isa number from the 1109 * chip in memory mode. 1110 */ 1111 if (isaId != EISA_NUM_CRYSTAL) { 1112 aprint_error_dev(sc->sc_dev, 1113 "failed to enable memory mode\n"); 1114 sc->sc_memorymode = FALSE; 1115 } else { 1116 /* 1117 * We are in memory mode so if we aren't using DMA, 1118 * then program the chip to interrupt early. 1119 */ 1120 if ((sc->sc_cfgflags & CFGFLG_DMA_MODE) == 0) { 1121 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUF_CFG, 1122 BUF_CFG_RX_DEST_IE | 1123 BUF_CFG_RX_MISS_OVER_IE | 1124 BUF_CFG_TX_COL_OVER_IE); 1125 } 1126 } 1127 1128 } 1129 1130 /* Put Ethernet address into the Individual Address register */ 1131 for (i = 0; i < 6; i += 2) { 1132 v = sc->sc_enaddr[i + 0] | (sc->sc_enaddr[i + 1]) << 8; 1133 CS_WRITE_PACKET_PAGE(sc, PKTPG_IND_ADDR + i, v); 1134 } 1135 1136 if (sc->sc_irq != -1) { 1137 /* Set the interrupt level in the chip */ 1138 if (sc->sc_prodid == PROD_ID_CS8900) { 1139 if (sc->sc_irq == 5) 1140 CS_WRITE_PACKET_PAGE(sc, PKTPG_INT_NUM, 3); 1141 else 1142 CS_WRITE_PACKET_PAGE(sc, PKTPG_INT_NUM, 1143 (sc->sc_irq) - 10); 1144 } else { /* CS8920 */ 1145 CS_WRITE_PACKET_PAGE(sc, PKTPG_8920_INT_NUM, 1146 sc->sc_irq); 1147 } 1148 } 1149 1150 /* Write the multicast mask to the address filter register */ 1151 cs_set_ladr_filt(sc, &sc->sc_ethercom); 1152 1153 /* Enable reception and transmission of frames */ 1154 CS_WRITE_PACKET_PAGE(sc, PKTPG_LINE_CTL, 1155 CS_READ_PACKET_PAGE(sc, PKTPG_LINE_CTL) | 1156 LINE_CTL_RX_ON | LINE_CTL_TX_ON); 1157 1158 /* Enable interrupt at the chip */ 1159 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL, 1160 CS_READ_PACKET_PAGE(sc, PKTPG_BUS_CTL) | BUS_CTL_INT_ENBL); 1161 } 1162 1163 int 1164 cs_init(struct ifnet *ifp) 1165 { 1166 int intState; 1167 int error = CS_OK; 1168 struct cs_softc *sc = ifp->if_softc; 1169 1170 if (cs_enable(sc)) 1171 goto out; 1172 1173 cs_stop(ifp, 0); 1174 1175 intState = splnet(); 1176 1177 #if 0 1178 /* Mark the interface as down */ 1179 sc->sc_ethercom.ec_if.if_flags &= ~(IFF_UP | IFF_RUNNING); 1180 #endif 1181 1182 #ifdef CS_DEBUG 1183 /* Enable debugging */ 1184 sc->sc_ethercom.ec_if.if_flags |= IFF_DEBUG; 1185 #endif 1186 1187 /* Reset the chip */ 1188 if ((error = cs_reset_chip(sc)) == CS_OK) { 1189 /* Initialize the chip */ 1190 cs_initChip(sc); 1191 1192 /* Mark the interface as running */ 1193 sc->sc_ethercom.ec_if.if_flags |= IFF_RUNNING; 1194 sc->sc_ethercom.ec_if.if_timer = 0; 1195 1196 /* Assume we have carrier until we are told otherwise. */ 1197 sc->sc_carrier = 1; 1198 } else 1199 aprint_error_dev(sc->sc_dev, "unable to reset chip\n"); 1200 1201 splx(intState); 1202 out: 1203 if (error == CS_OK) 1204 return 0; 1205 return EIO; 1206 } 1207 1208 void 1209 cs_set_ladr_filt(struct cs_softc *sc, struct ethercom *ec) 1210 { 1211 struct ifnet *ifp = &ec->ec_if; 1212 struct ether_multi *enm; 1213 struct ether_multistep step; 1214 uint16_t af[4]; 1215 uint16_t port, mask, index; 1216 1217 /* 1218 * Set up multicast address filter by passing all multicast addresses 1219 * through a crc generator, and then using the high order 6 bits as an 1220 * index into the 64 bit logical address filter. The high order bit 1221 * selects the word, while the rest of the bits select the bit within 1222 * the word. 1223 */ 1224 if (ifp->if_flags & IFF_PROMISC) { 1225 /* Accept all valid frames. */ 1226 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CTL, 1227 RX_CTL_PROMISC_A | RX_CTL_RX_OK_A | 1228 RX_CTL_IND_A | RX_CTL_BCAST_A | RX_CTL_MCAST_A); 1229 ifp->if_flags |= IFF_ALLMULTI; 1230 return; 1231 } 1232 1233 /* 1234 * Accept frames if a. crc valid, b. individual address match c. 1235 * broadcast address,and d. multicast addresses matched in the hash 1236 * filter 1237 */ 1238 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CTL, 1239 RX_CTL_RX_OK_A | RX_CTL_IND_A | RX_CTL_BCAST_A | RX_CTL_MCAST_A); 1240 1241 1242 /* 1243 * Start off with all multicast flag clear, set it if we need to 1244 * later, otherwise we will leave it. 1245 */ 1246 ifp->if_flags &= ~IFF_ALLMULTI; 1247 af[0] = af[1] = af[2] = af[3] = 0x0000; 1248 1249 /* 1250 * Loop through all the multicast addresses unless we get a range of 1251 * addresses, in which case we will just accept all packets. 1252 * Justification for this is given in the next comment. 1253 */ 1254 ETHER_LOCK(ec); 1255 ETHER_FIRST_MULTI(step, ec, enm); 1256 while (enm != NULL) { 1257 if (memcmp(enm->enm_addrlo, enm->enm_addrhi, 1258 sizeof enm->enm_addrlo)) { 1259 /* 1260 * We must listen to a range of multicast addresses. 1261 * For now, just accept all multicasts, rather than 1262 * trying to set only those filter bits needed to match 1263 * the range. (At this time, the only use of address 1264 * ranges is for IP multicast routing, for which the 1265 * range is big enough to require all bits set.) 1266 */ 1267 ifp->if_flags |= IFF_ALLMULTI; 1268 af[0] = af[1] = af[2] = af[3] = 0xffff; 1269 break; 1270 } else { 1271 /* 1272 * We have got an individual address so just set that 1273 * bit. 1274 */ 1275 index = cs_hash_index(enm->enm_addrlo); 1276 1277 /* Set the bit the Logical address filter. */ 1278 port = (uint16_t) (index >> 4); 1279 mask = (uint16_t) (1 << (index & 0xf)); 1280 af[port] |= mask; 1281 1282 ETHER_NEXT_MULTI(step, enm); 1283 } 1284 } 1285 ETHER_UNLOCK(ec); 1286 1287 /* Now program the chip with the addresses */ 1288 CS_WRITE_PACKET_PAGE(sc, PKTPG_LOG_ADDR + 0, af[0]); 1289 CS_WRITE_PACKET_PAGE(sc, PKTPG_LOG_ADDR + 2, af[1]); 1290 CS_WRITE_PACKET_PAGE(sc, PKTPG_LOG_ADDR + 4, af[2]); 1291 CS_WRITE_PACKET_PAGE(sc, PKTPG_LOG_ADDR + 6, af[3]); 1292 return; 1293 } 1294 1295 uint16_t 1296 cs_hash_index(char *addr) 1297 { 1298 uint32_t crc; 1299 uint16_t hash_code; 1300 1301 crc = ether_crc32_le(addr, ETHER_ADDR_LEN); 1302 1303 hash_code = crc >> 26; 1304 return hash_code; 1305 } 1306 1307 void 1308 cs_reset(struct cs_softc *sc) 1309 { 1310 1311 /* Mark the interface as down */ 1312 sc->sc_ethercom.ec_if.if_flags &= ~IFF_RUNNING; 1313 1314 /* Reset the chip */ 1315 cs_reset_chip(sc); 1316 } 1317 1318 int 1319 cs_ioctl(struct ifnet *ifp, u_long cmd, void *data) 1320 { 1321 struct cs_softc *sc = ifp->if_softc; 1322 int state; 1323 int result; 1324 1325 state = splnet(); 1326 1327 result = 0; /* Only set if something goes wrong */ 1328 1329 switch (cmd) { 1330 default: 1331 result = ether_ioctl(ifp, cmd, data); 1332 if (result == ENETRESET) { 1333 if (ifp->if_flags & IFF_RUNNING) { 1334 /* 1335 * Multicast list has changed. Set the 1336 * hardware filter accordingly. 1337 */ 1338 cs_set_ladr_filt(sc, &sc->sc_ethercom); 1339 } 1340 result = 0; 1341 } 1342 break; 1343 } 1344 1345 splx(state); 1346 1347 return result; 1348 } 1349 1350 int 1351 cs_mediachange(struct ifnet *ifp) 1352 { 1353 1354 /* 1355 * Current media is already set up. Just reset the interface 1356 * to let the new value take hold. 1357 */ 1358 cs_init(ifp); 1359 return 0; 1360 } 1361 1362 void 1363 cs_mediastatus(struct ifnet *ifp, struct ifmediareq *ifmr) 1364 { 1365 struct cs_softc *sc = ifp->if_softc; 1366 1367 /* The currently selected media is always the active media. */ 1368 ifmr->ifm_active = sc->sc_media.ifm_cur->ifm_media; 1369 1370 if (ifp->if_flags & IFF_UP) { 1371 /* Interface up, status is valid. */ 1372 ifmr->ifm_status = IFM_AVALID | 1373 (sc->sc_carrier ? IFM_ACTIVE : 0); 1374 } 1375 else ifmr->ifm_status = 0; 1376 } 1377 1378 int 1379 cs_intr(void *arg) 1380 { 1381 struct cs_softc *sc = arg; 1382 uint16_t Event; 1383 uint16_t rndEvent; 1384 1385 /*printf("cs_intr %p\n", sc);*/ 1386 /* Ignore any interrupts that happen while the chip is being reset */ 1387 if (sc->sc_resetting) { 1388 printf("%s: cs_intr: reset in progress\n", 1389 device_xname(sc->sc_dev)); 1390 return 1; 1391 } 1392 1393 /* Read an event from the Interrupt Status Queue */ 1394 if (sc->sc_memorymode) 1395 Event = CS_READ_PACKET_PAGE(sc, PKTPG_ISQ); 1396 else 1397 Event = CS_READ_PORT(sc, PORT_ISQ); 1398 1399 if ((Event & REG_NUM_MASK) == 0 || Event == 0xffff) 1400 return 0; /* Not ours */ 1401 1402 rndEvent = Event; 1403 1404 /* Process all the events in the Interrupt Status Queue */ 1405 while ((Event & REG_NUM_MASK) != 0 && Event != 0xffff) { 1406 /* Dispatch to an event handler based on the register number */ 1407 switch (Event & REG_NUM_MASK) { 1408 case REG_NUM_RX_EVENT: 1409 cs_receive_event(sc, Event); 1410 break; 1411 case REG_NUM_TX_EVENT: 1412 cs_transmit_event(sc, Event); 1413 break; 1414 case REG_NUM_BUF_EVENT: 1415 cs_buffer_event(sc, Event); 1416 break; 1417 case REG_NUM_TX_COL: 1418 case REG_NUM_RX_MISS: 1419 cs_counter_event(sc, Event); 1420 break; 1421 default: 1422 printf("%s: unknown interrupt event 0x%x\n", 1423 device_xname(sc->sc_dev), Event); 1424 break; 1425 } 1426 1427 /* Read another event from the Interrupt Status Queue */ 1428 if (sc->sc_memorymode) 1429 Event = CS_READ_PACKET_PAGE(sc, PKTPG_ISQ); 1430 else 1431 Event = CS_READ_PORT(sc, PORT_ISQ); 1432 } 1433 1434 /* have handled the interrupt */ 1435 rnd_add_uint32(&sc->rnd_source, rndEvent); 1436 return 1; 1437 } 1438 1439 void 1440 cs_counter_event(struct cs_softc *sc, uint16_t cntEvent) 1441 { 1442 struct ifnet *ifp; 1443 uint16_t errorCount; 1444 1445 ifp = &sc->sc_ethercom.ec_if; 1446 1447 switch (cntEvent & REG_NUM_MASK) { 1448 case REG_NUM_TX_COL: 1449 /* The count should be read before an overflow occurs. */ 1450 errorCount = CS_READ_PACKET_PAGE(sc, PKTPG_TX_COL); 1451 /* 1452 * The transmit event routine always checks the number of 1453 * collisions for any packet so we don't increment any 1454 * counters here, as they should already have been 1455 * considered. 1456 */ 1457 break; 1458 case REG_NUM_RX_MISS: 1459 /* The count should be read before an overflow occurs. */ 1460 errorCount = CS_READ_PACKET_PAGE(sc, PKTPG_RX_MISS); 1461 /* 1462 * Increment the input error count, the first 6bits are the 1463 * register id. 1464 */ 1465 if_statadd(ifp, if_ierrors, (errorCount & 0xffC0) >> 6); 1466 break; 1467 default: 1468 /* Do nothing */ 1469 break; 1470 } 1471 } 1472 1473 void 1474 cs_buffer_event(struct cs_softc *sc, uint16_t bufEvent) 1475 { 1476 1477 /* 1478 * Multiple events can be in the buffer event register at one time so 1479 * a standard switch statement will not suffice, here every event 1480 * must be checked. 1481 */ 1482 1483 /* 1484 * If 128 bits have been rxed by the time we get here, the dest event 1485 * will be cleared and 128 event will be set. 1486 */ 1487 if ((bufEvent & (BUF_EVENT_RX_DEST | BUF_EVENT_RX_128)) != 0) 1488 cs_process_rx_early(sc); 1489 1490 if (bufEvent & BUF_EVENT_RX_DMA) { 1491 /* Process the receive data */ 1492 if (sc->sc_dma_process_rx) 1493 (*sc->sc_dma_process_rx)(sc); 1494 else 1495 /* Should panic? */ 1496 aprint_error_dev(sc->sc_dev, "unexpected DMA event\n"); 1497 } 1498 1499 if (bufEvent & BUF_EVENT_TX_UNDR) { 1500 #if 0 1501 /* 1502 * This can happen occasionally, and it's not worth worrying 1503 * about. 1504 */ 1505 printf("%s: transmit underrun (%d -> %d)\n", 1506 device_xname(sc->sc_dev), sc->sc_xe_ent, 1507 cs_xmit_early_table[sc->sc_xe_ent].worse); 1508 #endif 1509 sc->sc_xe_ent = cs_xmit_early_table[sc->sc_xe_ent].worse; 1510 sc->sc_xe_togo = 1511 cs_xmit_early_table[sc->sc_xe_ent].better_count; 1512 1513 /* had an underrun, transmit is finished */ 1514 sc->sc_txbusy = FALSE; 1515 } 1516 1517 if (bufEvent & BUF_EVENT_SW_INT) 1518 printf("%s: software initiated interrupt\n", 1519 device_xname(sc->sc_dev)); 1520 } 1521 1522 void 1523 cs_transmit_event(struct cs_softc *sc, uint16_t txEvent) 1524 { 1525 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1526 1527 /* If there were any errors transmitting this frame */ 1528 if (txEvent & (TX_EVENT_LOSS_CRS | TX_EVENT_SQE_ERR | 1529 TX_EVENT_OUT_WIN | TX_EVENT_JABBER | TX_EVENT_16_COLL)) { 1530 /* Increment the output error count */ 1531 if_statinc(ifp, if_oerrors); 1532 1533 /* Note carrier loss. */ 1534 if (txEvent & TX_EVENT_LOSS_CRS) 1535 sc->sc_carrier = 0; 1536 1537 /* If debugging is enabled then log error messages */ 1538 if (ifp->if_flags & IFF_DEBUG) { 1539 if (txEvent & TX_EVENT_LOSS_CRS) 1540 aprint_error_dev(sc->sc_dev, "lost carrier\n"); 1541 1542 if (txEvent & TX_EVENT_SQE_ERR) 1543 aprint_error_dev(sc->sc_dev, "SQE error\n"); 1544 1545 if (txEvent & TX_EVENT_OUT_WIN) 1546 aprint_error_dev(sc->sc_dev, 1547 "out-of-window collision\n"); 1548 1549 if (txEvent & TX_EVENT_JABBER) 1550 aprint_error_dev(sc->sc_dev, "jabber\n"); 1551 1552 if (txEvent & TX_EVENT_16_COLL) 1553 aprint_error_dev(sc->sc_dev, 1554 "16 collisions\n"); 1555 } 1556 } else { 1557 /* Transmission successful, carrier is up. */ 1558 sc->sc_carrier = 1; 1559 #ifdef SHARK 1560 ledNetActive(); 1561 #endif 1562 } 1563 1564 /* Add the number of collisions for this frame */ 1565 net_stat_ref_t nsr = IF_STAT_GETREF(ifp); 1566 if (txEvent & TX_EVENT_16_COLL) 1567 if_statadd_ref(ifp, nsr, if_collisions, 16); 1568 else 1569 if_statadd_ref(ifp, nsr, if_collisions, 1570 ((txEvent & TX_EVENT_COLL_MASK) >> 11)); 1571 1572 if_statinc_ref(ifp, nsr, if_opackets); 1573 IF_STAT_PUTREF(ifp); 1574 1575 /* Transmission is no longer in progress */ 1576 sc->sc_txbusy = FALSE; 1577 1578 /* If there is more to transmit, start the next transmission */ 1579 if_schedule_deferred_start(ifp); 1580 } 1581 1582 void 1583 cs_print_rx_errors(struct cs_softc *sc, uint16_t rxEvent) 1584 { 1585 1586 if (rxEvent & RX_EVENT_RUNT) 1587 aprint_error_dev(sc->sc_dev, "runt\n"); 1588 1589 if (rxEvent & RX_EVENT_X_DATA) 1590 aprint_error_dev(sc->sc_dev, "extra data\n"); 1591 1592 if (rxEvent & RX_EVENT_CRC_ERR) { 1593 if (rxEvent & RX_EVENT_DRIBBLE) 1594 aprint_error_dev(sc->sc_dev, "alignment error\n"); 1595 else 1596 aprint_error_dev(sc->sc_dev, "CRC error\n"); 1597 } else { 1598 if (rxEvent & RX_EVENT_DRIBBLE) 1599 aprint_error_dev(sc->sc_dev, "dribble bits\n"); 1600 } 1601 } 1602 1603 void 1604 cs_receive_event(struct cs_softc *sc, uint16_t rxEvent) 1605 { 1606 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1607 1608 /* If the frame was not received OK */ 1609 if (!(rxEvent & RX_EVENT_RX_OK)) { 1610 /* Increment the input error count */ 1611 if_statinc(ifp, if_ierrors); 1612 1613 /* If debugging is enabled then log error messages. */ 1614 if (ifp->if_flags & IFF_DEBUG) { 1615 if (rxEvent != REG_NUM_RX_EVENT) { 1616 cs_print_rx_errors(sc, rxEvent); 1617 1618 /* 1619 * Must read the length of all received 1620 * frames 1621 */ 1622 CS_READ_PACKET_PAGE(sc, PKTPG_RX_LENGTH); 1623 1624 /* Skip the received frame */ 1625 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, 1626 CS_READ_PACKET_PAGE(sc, PKTPG_RX_CFG) | 1627 RX_CFG_SKIP); 1628 } else 1629 aprint_error_dev(sc->sc_dev, "implied skip\n"); 1630 } 1631 } else { 1632 /* 1633 * Process the received frame and pass it up to the upper 1634 * layers. 1635 */ 1636 cs_process_receive(sc); 1637 } 1638 } 1639 1640 void 1641 cs_ether_input(struct cs_softc *sc, struct mbuf *m) 1642 { 1643 struct ifnet *ifp = &sc->sc_ethercom.ec_if; 1644 1645 /* Pass the packet up. */ 1646 if_percpuq_enqueue(ifp->if_percpuq, m); 1647 } 1648 1649 void 1650 cs_process_receive(struct cs_softc *sc) 1651 { 1652 struct ifnet *ifp; 1653 struct mbuf *m; 1654 int totlen; 1655 uint16_t *pBuff, *pBuffLimit; 1656 int pad; 1657 unsigned int frameOffset = 0; /* XXX: gcc */ 1658 1659 #ifdef SHARK 1660 ledNetActive(); 1661 #endif 1662 1663 ifp = &sc->sc_ethercom.ec_if; 1664 1665 /* Received a packet; carrier is up. */ 1666 sc->sc_carrier = 1; 1667 1668 if (sc->sc_memorymode) { 1669 /* Initialize the frame offset */ 1670 frameOffset = PKTPG_RX_LENGTH; 1671 1672 /* Get the length of the received frame */ 1673 totlen = CS_READ_PACKET_PAGE(sc, frameOffset); 1674 frameOffset += 2; 1675 } else { 1676 /* Drop status */ 1677 CS_READ_PORT(sc, PORT_RXTX_DATA); 1678 1679 /* Get the length of the received frame */ 1680 totlen = CS_READ_PORT(sc, PORT_RXTX_DATA); 1681 } 1682 1683 if (totlen > ETHER_MAX_LEN) { 1684 aprint_error_dev(sc->sc_dev, "invalid packet length %d\n", 1685 totlen); 1686 1687 /* Skip the received frame */ 1688 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, 1689 CS_READ_PACKET_PAGE(sc, PKTPG_RX_CFG) | RX_CFG_SKIP); 1690 return; 1691 } 1692 1693 MGETHDR(m, M_DONTWAIT, MT_DATA); 1694 if (m == 0) { 1695 aprint_error_dev(sc->sc_dev, 1696 "cs_process_receive: unable to allocate mbuf\n"); 1697 if_statinc(ifp, if_ierrors); 1698 /* 1699 * Couldn't allocate an mbuf so things are not good, may as 1700 * well drop the packet I think. 1701 * 1702 * have already read the length so we should be right to skip 1703 * the packet. 1704 */ 1705 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, 1706 CS_READ_PACKET_PAGE(sc, PKTPG_RX_CFG) | RX_CFG_SKIP); 1707 return; 1708 } 1709 m_set_rcvif(m, ifp); 1710 m->m_pkthdr.len = totlen; 1711 1712 /* Number of bytes to align ip header on word boundary for ipintr */ 1713 pad = ALIGN(sizeof(struct ether_header)) - sizeof(struct ether_header); 1714 1715 /* 1716 * Alloc mbuf cluster if we need. 1717 * We need 1 byte spare because following packet read loop can overrun. 1718 */ 1719 if (totlen + pad + 1 > MHLEN) { 1720 MCLGET(m, M_DONTWAIT); 1721 if ((m->m_flags & M_EXT) == 0) { 1722 /* Couldn't allocate an mbuf cluster */ 1723 aprint_error_dev(sc->sc_dev, 1724 "cs_process_receive: " 1725 "unable to allocate a cluster\n"); 1726 m_freem(m); 1727 1728 /* Skip the received frame */ 1729 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, 1730 CS_READ_PACKET_PAGE(sc, PKTPG_RX_CFG) 1731 | RX_CFG_SKIP); 1732 return; 1733 } 1734 } 1735 1736 /* Align ip header on word boundary for ipintr */ 1737 m->m_data += pad; 1738 1739 m->m_len = totlen; 1740 pBuff = mtod(m, uint16_t *); 1741 1742 /* Now read the data from the chip */ 1743 if (sc->sc_memorymode) { 1744 /* Don't want to go over */ 1745 pBuffLimit = pBuff + (totlen + 1) / 2; 1746 1747 while (pBuff < pBuffLimit) { 1748 *pBuff++ = CS_READ_PACKET_PAGE(sc, frameOffset); 1749 frameOffset += 2; 1750 } 1751 } else 1752 IO_READ_MULTI_2(sc, PORT_RXTX_DATA, pBuff, (totlen + 1)>>1); 1753 1754 cs_ether_input(sc, m); 1755 } 1756 1757 void 1758 cs_process_rx_early(struct cs_softc *sc) 1759 { 1760 struct ifnet *ifp; 1761 struct mbuf *m; 1762 uint16_t frameCount, oldFrameCount; 1763 uint16_t rxEvent; 1764 uint16_t *pBuff; 1765 int pad; 1766 unsigned int frameOffset; 1767 1768 1769 ifp = &sc->sc_ethercom.ec_if; 1770 1771 /* Initialize the frame offset */ 1772 frameOffset = PKTPG_RX_FRAME; 1773 frameCount = 0; 1774 1775 MGETHDR(m, M_DONTWAIT, MT_DATA); 1776 if (m == 0) { 1777 aprint_error_dev(sc->sc_dev, 1778 "cs_process_rx_early: unable to allocate mbuf\n"); 1779 if_statinc(ifp, if_ierrors); 1780 /* 1781 * Couldn't allocate an mbuf so things are not good, may as 1782 * well drop the packet I think. 1783 * 1784 * have already read the length so we should be right to skip 1785 * the packet. 1786 */ 1787 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, 1788 CS_READ_PACKET_PAGE(sc, PKTPG_RX_CFG) | RX_CFG_SKIP); 1789 return; 1790 } 1791 m_set_rcvif(m, ifp); 1792 /* 1793 * Save processing by always using a mbuf cluster, guaranteed to fit 1794 * packet 1795 */ 1796 MCLGET(m, M_DONTWAIT); 1797 if ((m->m_flags & M_EXT) == 0) { 1798 /* Couldn't allocate an mbuf cluster */ 1799 aprint_error_dev(sc->sc_dev, 1800 "cs_process_rx_early: unable to allocate a cluster\n"); 1801 m_freem(m); 1802 /* Skip the frame */ 1803 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, 1804 CS_READ_PACKET_PAGE(sc, PKTPG_RX_CFG) | RX_CFG_SKIP); 1805 return; 1806 } 1807 1808 /* Align ip header on word boundary for ipintr */ 1809 pad = ALIGN(sizeof(struct ether_header)) - sizeof(struct ether_header); 1810 m->m_data += pad; 1811 1812 /* Set up the buffer pointer to point to the data area */ 1813 pBuff = mtod(m, uint16_t *); 1814 1815 /* 1816 * Now read the frame byte counter until we have finished reading the 1817 * frame 1818 */ 1819 oldFrameCount = 0; 1820 frameCount = CS_READ_PACKET_PAGE(sc, PKTPG_FRAME_BYTE_COUNT); 1821 while ((frameCount != 0) && (frameCount < MCLBYTES)) { 1822 for (; oldFrameCount < frameCount; oldFrameCount += 2) { 1823 *pBuff++ = CS_READ_PACKET_PAGE(sc, frameOffset); 1824 frameOffset += 2; 1825 } 1826 1827 /* Read the new count from the chip */ 1828 frameCount = CS_READ_PACKET_PAGE(sc, PKTPG_FRAME_BYTE_COUNT); 1829 } 1830 1831 /* Update the mbuf counts */ 1832 m->m_len = oldFrameCount; 1833 m->m_pkthdr.len = oldFrameCount; 1834 1835 /* Now check the Rx Event register */ 1836 rxEvent = CS_READ_PACKET_PAGE(sc, PKTPG_RX_EVENT); 1837 1838 if ((rxEvent & RX_EVENT_RX_OK) != 0) { 1839 /* 1840 * Do an implied skip, it seems to be more reliable than a 1841 * forced skip. 1842 */ 1843 rxEvent = CS_READ_PACKET_PAGE(sc, PKTPG_RX_STATUS); 1844 rxEvent = CS_READ_PACKET_PAGE(sc, PKTPG_RX_LENGTH); 1845 1846 /* 1847 * Now read the RX_EVENT register to perform an implied skip. 1848 */ 1849 rxEvent = CS_READ_PACKET_PAGE(sc, PKTPG_RX_EVENT); 1850 1851 cs_ether_input(sc, m); 1852 } else { 1853 m_freem(m); 1854 if_statinc(ifp, if_ierrors); 1855 } 1856 } 1857 1858 void 1859 cs_start_output(struct ifnet *ifp) 1860 { 1861 struct cs_softc *sc; 1862 struct mbuf *pMbuf; 1863 struct mbuf *pMbufChain; 1864 uint16_t BusStatus; 1865 uint16_t Length; 1866 int txLoop = 0; 1867 int dropout = 0; 1868 1869 sc = ifp->if_softc; 1870 1871 /* Check that the interface is up and running */ 1872 if ((ifp->if_flags & IFF_RUNNING) == 0) 1873 return; 1874 1875 /* Don't interrupt a transmission in progress */ 1876 if (sc->sc_txbusy) 1877 return; 1878 1879 /* This loop will only run through once if transmission is successful */ 1880 /* 1881 * While there are packets to transmit and a transmit is not in 1882 * progress 1883 */ 1884 while (sc->sc_txbusy == 0 && dropout == 0) { 1885 IFQ_DEQUEUE(&ifp->if_snd, pMbufChain); 1886 if (pMbufChain == NULL) 1887 break; 1888 1889 /* 1890 * If BPF is listening on this interface, let it see the packet 1891 * before we commit it to the wire. 1892 */ 1893 bpf_mtap(ifp, pMbufChain, BPF_D_OUT); 1894 1895 /* Find the total length of the data to transmit */ 1896 Length = 0; 1897 for (pMbuf = pMbufChain; pMbuf != NULL; pMbuf = pMbuf->m_next) 1898 Length += pMbuf->m_len; 1899 1900 do { 1901 /* 1902 * Request that the transmit be started after all 1903 * data has been copied 1904 * 1905 * In IO mode must write to the IO port not the packet 1906 * page address 1907 * 1908 * If this is changed to start transmission after a 1909 * small amount of data has been copied you tend to 1910 * get packet missed errors i think because the ISA 1911 * bus is too slow. Or possibly the copy routine is 1912 * not streamlined enough. 1913 */ 1914 if (sc->sc_memorymode) { 1915 CS_WRITE_PACKET_PAGE(sc, PKTPG_TX_CMD, 1916 cs_xmit_early_table[sc->sc_xe_ent].txcmd); 1917 CS_WRITE_PACKET_PAGE(sc, PKTPG_TX_LENGTH, Length); 1918 } else { 1919 CS_WRITE_PORT(sc, PORT_TX_CMD, 1920 cs_xmit_early_table[sc->sc_xe_ent].txcmd); 1921 CS_WRITE_PORT(sc, PORT_TX_LENGTH, Length); 1922 } 1923 1924 /* Adjust early-transmit machinery. */ 1925 if (--sc->sc_xe_togo == 0) { 1926 sc->sc_xe_ent = 1927 cs_xmit_early_table[sc->sc_xe_ent].better; 1928 sc->sc_xe_togo = 1929 cs_xmit_early_table[sc->sc_xe_ent].better_count; 1930 } 1931 /* 1932 * Read the BusStatus register which indicates 1933 * success of the request 1934 */ 1935 BusStatus = CS_READ_PACKET_PAGE(sc, PKTPG_BUS_ST); 1936 1937 /* 1938 * If there was an error in the transmit bid free the 1939 * mbuf and go on. This is presuming that mbuf is 1940 * corrupt. 1941 */ 1942 if (BusStatus & BUS_ST_TX_BID_ERR) { 1943 aprint_error_dev(sc->sc_dev, 1944 "transmit bid error (too big)"); 1945 1946 /* Discard the bad mbuf chain */ 1947 m_freem(pMbufChain); 1948 if_statinc(&sc->sc_ethercom.ec_if, if_oerrors); 1949 1950 /* Loop up to transmit the next chain */ 1951 txLoop = 0; 1952 } else { 1953 if (BusStatus & BUS_ST_RDY4TXNOW) { 1954 /* 1955 * The chip is ready for transmission 1956 * now 1957 */ 1958 /* 1959 * Copy the frame to the chip to 1960 * start transmission 1961 */ 1962 cs_copy_tx_frame(sc, pMbufChain); 1963 1964 /* Free the mbuf chain */ 1965 m_freem(pMbufChain); 1966 1967 /* Transmission is now in progress */ 1968 sc->sc_txbusy = TRUE; 1969 txLoop = 0; 1970 } else { 1971 /* 1972 * If we get here we want to try 1973 * again with the same mbuf, until 1974 * the chip lets us transmit. 1975 */ 1976 txLoop++; 1977 if (txLoop > CS_OUTPUT_LOOP_MAX) { 1978 /* Free the mbuf chain */ 1979 m_freem(pMbufChain); 1980 /* 1981 * Transmission is not in 1982 * progress 1983 */ 1984 sc->sc_txbusy = FALSE; 1985 /* 1986 * Increment the output error 1987 * count 1988 */ 1989 if_statinc(ifp, if_oerrors); 1990 /* 1991 * exit the routine and drop 1992 * the packet. 1993 */ 1994 txLoop = 0; 1995 dropout = 1; 1996 } 1997 } 1998 } 1999 } while (txLoop); 2000 } 2001 } 2002 2003 void 2004 cs_copy_tx_frame(struct cs_softc *sc, struct mbuf *m0) 2005 { 2006 struct mbuf *m; 2007 int len, leftover, frameoff; 2008 uint16_t dbuf; 2009 uint8_t *p; 2010 #ifdef DIAGNOSTIC 2011 uint8_t *lim; 2012 #endif 2013 2014 /* Initialize frame pointer and data port address */ 2015 frameoff = PKTPG_TX_FRAME; 2016 2017 /* Start out with no leftover data */ 2018 leftover = 0; 2019 dbuf = 0; 2020 2021 /* Process the chain of mbufs */ 2022 for (m = m0; m != NULL; m = m->m_next) { 2023 /* Process all of the data in a single mbuf. */ 2024 p = mtod(m, uint8_t *); 2025 len = m->m_len; 2026 #ifdef DIAGNOSTIC 2027 lim = p + len; 2028 #endif 2029 2030 while (len > 0) { 2031 if (leftover) { 2032 /* 2033 * Data left over (from mbuf or realignment). 2034 * Buffer the next byte, and write it and 2035 * the leftover data out. 2036 */ 2037 dbuf |= *p++ << 8; 2038 len--; 2039 if (sc->sc_memorymode) { 2040 CS_WRITE_PACKET_PAGE(sc, frameoff, dbuf); 2041 frameoff += 2; 2042 } 2043 else { 2044 CS_WRITE_PORT(sc, PORT_RXTX_DATA, dbuf); 2045 } 2046 leftover = 0; 2047 } else if ((long) p & 1) { 2048 /* Misaligned data. Buffer the next byte. */ 2049 dbuf = *p++; 2050 len--; 2051 leftover = 1; 2052 } else { 2053 /* 2054 * Aligned data. This is the case we like. 2055 * 2056 * Write-region out as much as we can, then 2057 * buffer the remaining byte (if any). 2058 */ 2059 leftover = len & 1; 2060 len &= ~1; 2061 if (sc->sc_memorymode) { 2062 MEM_WRITE_REGION_2(sc, frameoff, 2063 (uint16_t *) p, len >> 1); 2064 frameoff += len; 2065 } else 2066 IO_WRITE_MULTI_2(sc, PORT_RXTX_DATA, 2067 (uint16_t *)p, len >> 1); 2068 p += len; 2069 2070 if (leftover) 2071 dbuf = *p++; 2072 len = 0; 2073 } 2074 } 2075 if (len < 0) 2076 panic("cs_copy_tx_frame: negative len"); 2077 #ifdef DIAGNOSTIC 2078 if (p != lim) 2079 panic("cs_copy_tx_frame: p != lim"); 2080 #endif 2081 } 2082 if (leftover) { 2083 if (sc->sc_memorymode) 2084 CS_WRITE_PACKET_PAGE(sc, frameoff, dbuf); 2085 else 2086 CS_WRITE_PORT(sc, PORT_RXTX_DATA, dbuf); 2087 } 2088 } 2089 2090 static int 2091 cs_enable(struct cs_softc *sc) 2092 { 2093 2094 if (CS_IS_ENABLED(sc) == 0) { 2095 if (sc->sc_enable != NULL) { 2096 int error; 2097 2098 error = (*sc->sc_enable)(sc); 2099 if (error) 2100 return error; 2101 } 2102 sc->sc_cfgflags |= CFGFLG_ENABLED; 2103 } 2104 2105 return 0; 2106 } 2107 2108 static void 2109 cs_disable(struct cs_softc *sc) 2110 { 2111 2112 if (CS_IS_ENABLED(sc)) { 2113 if (sc->sc_disable != NULL) 2114 (*sc->sc_disable)(sc); 2115 2116 sc->sc_cfgflags &= ~CFGFLG_ENABLED; 2117 } 2118 } 2119 2120 static void 2121 cs_stop(struct ifnet *ifp, int disable) 2122 { 2123 struct cs_softc *sc = ifp->if_softc; 2124 2125 CS_WRITE_PACKET_PAGE(sc, PKTPG_RX_CFG, 0); 2126 CS_WRITE_PACKET_PAGE(sc, PKTPG_TX_CFG, 0); 2127 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUF_CFG, 0); 2128 CS_WRITE_PACKET_PAGE(sc, PKTPG_BUS_CTL, 0); 2129 2130 if (disable) 2131 cs_disable(sc); 2132 2133 ifp->if_flags &= ~IFF_RUNNING; 2134 } 2135 2136 int 2137 cs_activate(device_t self, enum devact act) 2138 { 2139 struct cs_softc *sc = device_private(self); 2140 2141 switch (act) { 2142 case DVACT_DEACTIVATE: 2143 if_deactivate(&sc->sc_ethercom.ec_if); 2144 return 0; 2145 default: 2146 return EOPNOTSUPP; 2147 } 2148 } 2149