1 /* $NetBSD: ahcireg.h,v 1.2 2016/04/23 10:15:29 skrll Exp $ */ 2 3 /*- 4 * Copyright (c) 2007 Ruslan Ermilov and Vsevolod Lobko. 5 * All rights reserved. 6 * 7 * Redistribution and use in source and binary forms, with or 8 * without modification, are permitted provided that the following 9 * conditions are met: 10 * 1. Redistributions of source code must retain the above copyright 11 * notice, this list of conditions and the following disclaimer. 12 * 2. Redistributions in binary form must reproduce the above 13 * copyright notice, this list of conditions and the following 14 * disclaimer in the documentation and/or other materials provided 15 * with the distribution. 16 * 3. The names of the authors may not be used to endorse or promote 17 * products derived from this software without specific prior 18 * written permission. 19 * 20 * THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY 21 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, 22 * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 23 * PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHORS 24 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, 25 * OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, 26 * PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 27 * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY 28 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR 29 * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 30 * OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY 31 * OF SUCH DAMAGE. 32 */ 33 #ifndef _AHCIREG_H 34 #define _AHCIREG_H 35 36 #define ADMHCD_REG_CONTROL 0x00 37 #define ADMHCD_REG_INTSTATUS 0x04 38 #define ADMHCD_REG_INTENABLE 0x08 39 #define ADMHCD_REG_HOSTCONTROL 0x10 40 #define ADMHCD_REG_FMINTERVAL 0x18 41 #define ADMHCD_REG_FMNUMBER 0x1c 42 #define ADMHCD_REG_LSTHRESH 0x70 43 #define ADMHCD_REG_RHDESCR 0x74 44 #define ADMHCD_REG_PORTSTATUS0 0x78 45 #define ADMHCD_REG_PORTSTATUS1 0x7c 46 #define ADMHCD_REG_HOSTHEAD 0x80 47 #define ADMHCD_NUMPORTS 2 48 49 #define ADMHCD_HOST_EN 0x00000001 /* Host enable */ 50 #define ADMHCD_SW_INTREQ 0x00000002 /* request software int */ 51 #define ADMHCD_SW_RESET 0x00000008 /* Reset */ 52 53 #define ADMHCD_INT_TD 0x00100000 /* TD completed */ 54 #define ADMHCD_INT_SW 0x20000000 /* software interrupt */ 55 #define ADMHCD_INT_FATAL 0x40000000 /* Fatal interrupt */ 56 #define ADMHCD_INT_ACT 0x80000000 /* Interrupt active */ 57 58 #define ADMHCD_STATE_RST 0x00000000 /* bus state reset */ 59 #define ADMHCD_STATE_RES 0x00000001 /* bus state resume */ 60 #define ADMHCD_STATE_OP 0x00000002 /* bus state operational */ 61 #define ADMHCD_STATE_SUS 0x00000003 /* bus state suspended */ 62 #define ADMHCD_DMA_EN 0x00000004 /* enable dma engine */ 63 64 #define ADMHCD_NPS 0x00000020 /* No Power Switch */ 65 #define ADMHCD_LPSC 0x04000000 /* Local power switch change */ 66 67 #define ADMHCD_CCS 0x00000001 /* current connect status */ 68 #define ADMHCD_PES 0x00000002 /* port enable status */ 69 #define ADMHCD_PSS 0x00000004 /* port suspend status */ 70 #define ADMHCD_POCI 0x00000008 /* port overcurrent indicator */ 71 #define ADMHCD_PRS 0x00000010 /* port reset status */ 72 #define ADMHCD_PPS 0x00000100 /* port power status */ 73 #define ADMHCD_LSDA 0x00000200 /* low speed device attached */ 74 #define ADMHCD_CSC 0x00010000 /* connect status change */ 75 #define ADMHCD_PESC 0x00020000 /* enable status change */ 76 #define ADMHCD_PSSC 0x00040000 /* suspend status change */ 77 #define ADMHCD_OCIC 0x00080000 /* overcurrent change*/ 78 #define ADMHCD_PRSC 0x00100000 /* reset status change */ 79 80 struct admhcd_ed { 81 /* Don't change first four, they used for DMA */ 82 volatile uint32_t control; 83 volatile struct admhcd_td *tail; 84 volatile struct admhcd_td *head; 85 volatile struct admhcd_ed *next; 86 /* the rest is for the driver only: */ 87 uint32_t unused[4]; 88 } __attribute__ ((packed)); 89 90 #define ADMHCD_ED_EPSHIFT 7 /* Shift for endpoint number */ 91 #define ADMHCD_ED_INT 0x00000800 /* Is this an int endpoint */ 92 #define ADMHCD_ED_SPEED 0x00002000 /* Is it a high speed dev? */ 93 #define ADMHCD_ED_SKIP 0x00004000 /* Skip this ED */ 94 #define ADMHCD_ED_FORMAT 0x00008000 /* Is this an isoc endpoint */ 95 #define ADMHCD_ED_MAXSHIFT 16 /* Shift for max packet size */ 96 97 struct admhcd_td { 98 /* Don't change first four, they are used for DMA */ 99 volatile uint32_t control; 100 volatile uint32_t buffer; 101 volatile uint32_t buflen; 102 volatile struct admhcd_td *next; 103 /* the rest is for the driver only: */ 104 /* struct urb *urb; 105 struct admhcd_td *real; */ 106 uint32_t len; 107 uint32_t unused[3]; 108 } __attribute__ ((packed)); 109 110 #define ADMHCD_TD_OWN 0x80000000 111 #define ADMHCD_TD_TOGGLE 0x00000000 112 #define ADMHCD_TD_DATA0 0x01000000 113 #define ADMHCD_TD_DATA1 0x01800000 114 #define ADMHCD_TD_OUT 0x00200000 115 #define ADMHCD_TD_IN 0x00400000 116 #define ADMHCD_TD_SETUP 0x00000000 117 #define ADMHCD_TD_ISO 0x00010000 118 #define ADMHCD_TD_R 0x00040000 119 #define ADMHCD_TD_INTEN 0x00010000 120 121 #define ADMHCD_TD_ERRMASK 0x78000000 122 #define ADMHCD_TD_ERRSHIFT 27 123 124 #endif /* _AHCIREG_H */ 125