Lines Matching refs:DEVNAME
222 #define DEVNAME(_sc) ((_sc)->sc_dev.dv_xname)
381 qle_intr, sc, DEVNAME(sc));
441 printf("%s: unable to map mbox registers\n", DEVNAME(sc));
470 printf("%s: no firmware loaded\n", DEVNAME(sc));
482 printf("%s: no firmware to load?\n", DEVNAME(sc));
486 printf("%s: firmware load failed\n", DEVNAME(sc));
514 printf("%s: firmware rev %d.%d.%d, attrs 0x%x\n", DEVNAME(sc),
528 printf("%s: unable to allocate scratch\n", DEVNAME(sc));
598 printf("%s: ISP firmware init failed: %x\n", DEVNAME(sc),
613 DEVNAME(sc), sc->sc_mbox[0]);
617 sc->sc_update_taskq = taskq_create(DEVNAME(sc), 1, IPL_BIO, 0);
644 DEVNAME(sc));
783 DEVNAME(sc), loopid, sc->sc_mbox[0]);
808 DEVNAME(sc), sc->sc_mbox[0]);
848 DEVNAME(sc));
855 DEVNAME(sc), port->loopid, port->port_name);
910 DEVNAME(sc), ISSET(port->flags, QLE_PORT_FLAG_IS_TARGET) ?
953 DEVNAME(sc), ISSET(port->flags, QLE_PORT_FLAG_IS_TARGET) ?
972 DEVNAME(sc), loopid);
991 "%06x\n", DEVNAME(sc), portid);
1001 DEVNAME(sc));
1016 DEVNAME(sc), portid, loopid);
1053 DEVNAME(sc), handle);
1110 DPRINTF(QLE_D_IO, "%s: dma error\n", DEVNAME(sc));
1116 DEVNAME(sc));
1122 DPRINTF(QLE_D_IO, "%s: aborted\n", DEVNAME(sc));
1129 DEVNAME(sc));
1134 DPRINTF(QLE_D_IO, "%s: queue full\n", DEVNAME(sc));
1141 DPRINTF(QLE_D_IO, "%s: dev gone\n", DEVNAME(sc));
1148 "%x\n", DEVNAME(sc), status->completion);
1156 DEVNAME(sc));
1169 DEVNAME(sc), entry[0]);
1178 DPRINTF(QLE_D_IO, "%s: request bounced back\n", DEVNAME(sc));
1192 DEVNAME(sc), entry[0]);
1240 "%x\n", DEVNAME(sc), info);
1296 DPRINTF(QLE_D_IO, "%s: cmd too big (%d)\n", DEVNAME(sc),
1346 DEVNAME(sc), req);
1513 DPRINTF(QLE_D_MBOX, "%s: mbox timed out\n", DEVNAME(sc));
1653 DPRINTF(QLE_D_IO, "%s: dma still active\n", DEVNAME(sc));
1671 printf("%s: reset mbox didn't clear\n", DEVNAME(sc));
1682 printf("%s: reset status didn't clear\n", DEVNAME(sc));
1698 printf("%s: risc not ready after reset\n", DEVNAME(sc));
1725 DPRINTF(QLE_D_PORT, "%s: unable to get loop id\n", DEVNAME(sc));
1734 DPRINTF(QLE_D_PORT, "%s: loop id %d\n", DEVNAME(sc),
1743 DEVNAME(sc), sc->sc_port_id);
1748 DPRINTF(QLE_D_PORT, "%s: not useful\n", DEVNAME(sc));
1791 DEVNAME(sc), sc->sc_mbox[0]);
1798 DPRINTF(QLE_D_PORT, "%s: SNS port name %llx\n", DEVNAME(sc),
1816 printf("%s: RFT_ID failed\n", DEVNAME(sc));
1908 DPRINTF(QLE_D_PORT, "%s: GA_NXT %06x failed: %x\n", DEVNAME(sc),
1918 DPRINTF(QLE_D_PORT, "%s: GA_NXT returned junk\n", DEVNAME(sc));
1932 DEVNAME(sc), *lastport, betoh64(gar->port_name),
1943 DEVNAME(sc));
1985 DEVNAME(sc), port->loopid, port->portid, flags);
2032 printf("%s: ran out of loop ids\n", DEVNAME(sc));
2043 DEVNAME(sc), port->portid, port->loopid);
2049 DEVNAME(sc), port->portid, info);
2064 DEVNAME(sc), err, port->portid);
2084 DEVNAME(sc), port->portid);
2087 "%x %x\n", DEVNAME(sc), port->portid, err, info);
2105 DPRINTF(QLE_D_PORT, "%s: updating\n", DEVNAME(sc));
2110 DEVNAME(sc));
2139 DEVNAME(sc));
2142 DEVNAME(sc));
2150 DEVNAME(sc));
2158 DEVNAME(sc));
2213 DEVNAME(sc));
2220 DEVNAME(sc), fport->loopid);
2234 DEVNAME(sc));
2263 "%06x\n", DEVNAME(sc),
2273 " %06x\n", DEVNAME(sc),
2284 DEVNAME(sc));
2303 DEVNAME(sc), port->portid);
2308 "failed\n", DEVNAME(sc),
2314 DEVNAME(sc));
2350 DEVNAME(sc), port->portid);
2362 DEVNAME(sc));
2391 DPRINTF(QLE_D_PORT, "%s: done updating\n", DEVNAME(sc));
2411 DPRINTF(QLE_D_INTR, "%s: lip occurred\n", DEVNAME(sc));
2415 DPRINTF(QLE_D_PORT, "%s: loop up\n", DEVNAME(sc));
2423 DPRINTF(QLE_D_PORT, "%s: loop down\n", DEVNAME(sc));
2430 DPRINTF(QLE_D_PORT, "%s: lip reset\n", DEVNAME(sc));
2436 DPRINTF(QLE_D_PORT, "%s: port db changed %x\n", DEVNAME(sc),
2443 DEVNAME(sc), qle_read_mbox(sc, 1), qle_read_mbox(sc, 2));
2448 DPRINTF(QLE_D_INTR, "%s: lip f8\n", DEVNAME(sc));
2453 DEVNAME(sc), qle_read_mbox(sc, 1));
2458 DEVNAME(sc));
2466 DPRINTF(QLE_D_INTR, "%s: unknown async %x\n", DEVNAME(sc), info);
2482 printf("%s: stuff\n", DEVNAME(sc));
2504 printf("%s: iocb:\n", DEVNAME(sc));
2524 printf("%s: iocb segs:\n", DEVNAME(sc));
2792 printf("%s: nvram corrupt\n", DEVNAME(sc));
2866 printf("%s: unable to allocate ccbs\n", DEVNAME(sc));
2873 printf("%s: unable to allocate ccb dmamem\n", DEVNAME(sc));
2879 printf("%s: unable to allocate rcb dmamem\n", DEVNAME(sc));
2884 printf("%s: unable to allocate pri ccb dmamem\n", DEVNAME(sc));
2890 printf("%s: unable to allocate iocb segments\n", DEVNAME(sc));
2897 printf("%s: unable to allocate FCP_CMNDs\n", DEVNAME(sc));
2910 printf("%s: unable to create dma map\n", DEVNAME(sc));