History log of /llvm-project/clang/test/OpenMP/target_update_messages.cpp (Results 1 – 20 of 20)
Revision (<<< Hide revision tags) (Show revision tags >>>) Date Author Comments
Revision tags: llvmorg-18.1.8, llvmorg-18.1.7
# b49ce9c3 23-May-2024 Aaron Ballman <aaron@aaronballman.com>

Fix more diagnostic wording for style; NFC (#93190)

This tries to fix all of the places where a diagnostic message starts
with a capital letter (other than acroynyms or proper nouns) or ends
with

Fix more diagnostic wording for style; NFC (#93190)

This tries to fix all of the places where a diagnostic message starts
with a capital letter (other than acroynyms or proper nouns) or ends
with punctuation (other than a question mark).

This is in support of a planned change to tablegen to start diagnosing
incorrect diagnostic message styles.

show more ...


Revision tags: llvmorg-18.1.6, llvmorg-18.1.5, llvmorg-18.1.4, llvmorg-18.1.3, llvmorg-18.1.2, llvmorg-18.1.1, llvmorg-18.1.0, llvmorg-18.1.0-rc4, llvmorg-18.1.0-rc3, llvmorg-18.1.0-rc2, llvmorg-18.1.0-rc1, llvmorg-19-init, llvmorg-17.0.6, llvmorg-17.0.5, llvmorg-17.0.4, llvmorg-17.0.3, llvmorg-17.0.2, llvmorg-17.0.1, llvmorg-17.0.0, llvmorg-17.0.0-rc4, llvmorg-17.0.0-rc3, llvmorg-17.0.0-rc2, llvmorg-17.0.0-rc1, llvmorg-18-init, llvmorg-16.0.6
# 0c6f2f62 06-Jun-2023 Animesh Kumar <animesh.kumar@amd.com>

[OpenMP] Update the default version of OpenMP to 5.1

The default version of OpenMP is updated from 5.0 to 5.1 which means if -fopenmp is specified but -fopenmp-version is not specified with clang, t

[OpenMP] Update the default version of OpenMP to 5.1

The default version of OpenMP is updated from 5.0 to 5.1 which means if -fopenmp is specified but -fopenmp-version is not specified with clang, the default version of OpenMP is taken to be 5.1. After modifying the Frontend for that, various LIT tests were updated. This patch contains all such changes. At a high level, these are the patterns of changes observed in LIT tests -

# RUN lines which mentioned `-fopenmp-version=50` need to kept only if the IR for version 5.0 and 5.1 are different. Otherwise only one RUN line with no version info(i.e. default version) needs to be there.

# Test cases of this sort already had the RUN lines with respect to the older default version 5.0 and the version 5.1. Only swapping the version specification flag `-fopenmp-version` from newer version RUN line to older version RUN line is required.

# Diagnostics: Remove the 5.0 version specific RUN lines if there was no difference in the Diagnostics messages with respect to the default 5.1.

# Diagnostics: In case there was any difference in diagnostics messages between 5.0 and 5.1, mention version specific messages in tests.

# If the test contained version specific ifdef's e.g. "#ifdef OMP5" but there were no RUN lines for any other version than 5.X, then bring the code guarded by ifdef's outside and remove the ifdef's.

# Some tests had RUN lines for both 5.0 and 5.1 versions, but it is found that the IR for 5.0 is not different from the 5.1, therefore such RUN lines are redundant. So, such duplicated lines are removed.

# To generate CHECK lines automatically, use the script llvm/utils/update_cc_test_checks.py

Reviewed By: saiislam, ABataev

Differential Revision: https://reviews.llvm.org/D129635

(cherry picked from commit 9dd2999907dc791136a75238a6000f69bf67cf4e)

show more ...


Revision tags: llvmorg-16.0.5, llvmorg-16.0.4, llvmorg-16.0.3
# ba15d186 30-Apr-2023 Mark de Wever <koraq@xs4all.nl>

[clang] Use -std=c++23 instead of -std=c++2b

During the ISO C++ Committee meeting plenary session the C++23 Standard
has been voted as technical complete.

This updates the reference to c++2b to c++

[clang] Use -std=c++23 instead of -std=c++2b

During the ISO C++ Committee meeting plenary session the C++23 Standard
has been voted as technical complete.

This updates the reference to c++2b to c++23 and updates the __cplusplus
macro.

Drive-by fixes c++1z -> c++17 and c++2a -> c++20 when seen.

Reviewed By: aaron.ballman

Differential Revision: https://reviews.llvm.org/D149553

show more ...


Revision tags: llvmorg-16.0.2, llvmorg-16.0.1, llvmorg-16.0.0, llvmorg-16.0.0-rc4, llvmorg-16.0.0-rc3, llvmorg-16.0.0-rc2, llvmorg-16.0.0-rc1, llvmorg-17-init, llvmorg-15.0.7, llvmorg-15.0.6, llvmorg-15.0.5, llvmorg-15.0.4, llvmorg-15.0.3, working, llvmorg-15.0.2, llvmorg-15.0.1, llvmorg-15.0.0, llvmorg-15.0.0-rc3, llvmorg-15.0.0-rc2, llvmorg-15.0.0-rc1, llvmorg-16-init, llvmorg-14.0.6, llvmorg-14.0.5, llvmorg-14.0.4
# 9519daca 12-May-2022 David Tenty <daltenty@ibm.com>

Revert "[NFC][tests][AIX] XFAIL test for lack of visibility support"

This reverts commit f5a9b5cc12658f4d6caa3e0cfc3e771698fb3798 since
https://reviews.llvm.org/D125141 has resolved the test issue.


Revision tags: llvmorg-14.0.3, llvmorg-14.0.2, llvmorg-14.0.1
# f5a9b5cc 28-Mar-2022 Jake Egan <jakeegan10@gmail.com>

[NFC][tests][AIX] XFAIL test for lack of visibility support

With the addition of `__attribute__((visibility("hidden")))` to the test, the test fails because AIX's current default behaviour is to ign

[NFC][tests][AIX] XFAIL test for lack of visibility support

With the addition of `__attribute__((visibility("hidden")))` to the test, the test fails because AIX's current default behaviour is to ignore hidden visibility, so the expected error is not seen. This patch marks the test `XFAIL` on AIX for now.

Reviewed By: cebowleratibm

Differential Revision: https://reviews.llvm.org/D122519

show more ...


# bfda7934 24-Mar-2022 Joseph Huber <jhuber6@vols.utk.edu>

[OpenMP] Add a semantic check for updating hidden or internal values

A previous patch removed the compiler generating offloading entries
for variables that were declared on the device but were inter

[OpenMP] Add a semantic check for updating hidden or internal values

A previous patch removed the compiler generating offloading entries
for variables that were declared on the device but were internal or
hidden. This allowed us to compile programs but turns any attempt to run
'#pragma omp target update' on one of those variables a silent failure.
This patch adds a check in the semantic analysis for if the user is
attempting the update a variable on the device from the host that is not
externally visible.

Reviewed By: jdoerfert

Differential Revision: https://reviews.llvm.org/D122403

show more ...


Revision tags: llvmorg-14.0.0, llvmorg-14.0.0-rc4, llvmorg-14.0.0-rc3, llvmorg-14.0.0-rc2, llvmorg-14.0.0-rc1
# c1512250 08-Feb-2022 Corentin Jabot <corentin.jabot@gmail.com>

[C++2b] Implement multidimentional subscript operator

Implement P2128R6 in C++23 mode.

Unlike GCC's implementation, this doesn't try to recover when a user
meant to use a comma expression.

Because

[C++2b] Implement multidimentional subscript operator

Implement P2128R6 in C++23 mode.

Unlike GCC's implementation, this doesn't try to recover when a user
meant to use a comma expression.

Because the syntax changes meaning in C++23, the patch is *NOT*
implemented as an extension. Instead, declaring an array with not
exactly 1 parameter is an error in older languages modes. There is an
off-by-default extension warning in C++23 mode.

Unlike the standard, we supports default arguments;

Ie, we assume, based on conversations in WG21, that the proposed
resolution to CWG2507 will be accepted.

We allow arrays OpenMP sections and C++23 multidimensional array to
coexist:

[a , b] multi dimensional array
[a : b] open mp section
[a, b: c] // error

The rest of the patch is relatively straight forward: we take care to
support an arbitrary number of arguments everywhere.

show more ...


Revision tags: llvmorg-15-init, llvmorg-13.0.1, llvmorg-13.0.1-rc3, llvmorg-13.0.1-rc2, llvmorg-13.0.1-rc1, llvmorg-13.0.0, llvmorg-13.0.0-rc4, llvmorg-13.0.0-rc3, llvmorg-13.0.0-rc2
# 656d0223 03-Aug-2021 Jennifer Yu <jennifer.yu@intel.com>

Stop emit incomplete type error for a variable in a map clause
where should not.

Currently we are using QTy->isIncompleteType(&ND) to check incomplete
type. But before doing that, need to instantia

Stop emit incomplete type error for a variable in a map clause
where should not.

Currently we are using QTy->isIncompleteType(&ND) to check incomplete
type. But before doing that, need to instantiate for a class template
specialization or a class member of a class template specialization,
or an array with known size of such..., so that we know it is really
incomplete type.

To fix this using RequireCompleteType instead.

The new test is added into "test/OpenMP/target_update_messages.cpp"

The different of using RequireCompleteType is when emit incomplete type,
an additional note is also emitted to point to where incomplete type
is declared. Because this change, many tests are needed to be fixed
by adding additional note.

This is to fix https://bugs.llvm.org/show_bug.cgi?id=50508

Differential Revision: https://reviews.llvm.org/D107200

show more ...


Revision tags: llvmorg-13.0.0-rc1, llvmorg-14-init, llvmorg-12.0.1, llvmorg-12.0.1-rc4, llvmorg-12.0.1-rc3, llvmorg-12.0.1-rc2, llvmorg-12.0.1-rc1, llvmorg-12.0.0, llvmorg-12.0.0-rc5, llvmorg-12.0.0-rc4, llvmorg-12.0.0-rc3, llvmorg-12.0.0-rc2, llvmorg-11.1.0, llvmorg-11.1.0-rc3, llvmorg-12.0.0-rc1, llvmorg-13-init, llvmorg-11.1.0-rc2, llvmorg-11.1.0-rc1, llvmorg-11.0.1, llvmorg-11.0.1-rc2, llvmorg-11.0.1-rc1
# 0cab9114 07-Nov-2020 cchen <cchen@cray.com>

[OpenMP5.0] map item can be non-contiguous for target update

In order not to modify the `tgt_target_data_update` information but still be
able to pass the extra information for non-contiguous map it

[OpenMP5.0] map item can be non-contiguous for target update

In order not to modify the `tgt_target_data_update` information but still be
able to pass the extra information for non-contiguous map item (offset,
count, and stride for each dimension), this patch overload `arg` when
the maptype is set as `OMP_MAP_DESCRIPTOR`. The origin `arg` is for
passing the pointer information, however, the overloaded `arg` is an
array of descriptor_dim:

struct descriptor_dim {
int64_t offset;
int64_t count;
int64_t stride
};

and the array size is the same as dimension size. In addition, since we
have count and stride information in descriptor_dim, we can replace/overload the
`arg_size` parameter by using dimension size.

For supporting `stride` in array section, we use a dummy dimension in
descriptor to store the unit size. The formula for counting the stride
in dimension D_n: `unit size * (D_0 * D_1 ... * D_n-1) * D_n.stride`.

Demonstrate how it works:
```
double arr[3][4][5];

D0: { offset = 0, count = 1, stride = 8 } // offset, count, dimension size always be 0, 1, 1 for this extra dimension, stride is the unit size
D1: { offset = 0, count = 2, stride = 8 * 1 * 2 = 16 } // stride = unit size * (product of dimension size of D0) * D1.stride = 4 * 1 * 2 = 8
D2: { offset = 2, count = 2, stride = 8 * (1 * 5) * 1 = 40 } // stride = unit size * (product of dimension size of D0, D1) * D2.stride = 4 * 5 * 1 = 20
D3: { offset = 0, count = 2, stride = 8 * (1 * 5 * 4) * 2 = 320 } // stride = unit size * (product of dimension size of D0, D1, D2) * D3.stride = 4 * 25 * 2 = 200

// X here means we need to offload this data, therefore, runtime will transfer
// data from offset 80, 96, 120, 136, 400, 416, 440, 456
// Runtime patch: https://reviews.llvm.org/D82245
// OOOOO OOOOO OOOOO
// OOOOO OOOOO OOOOO
// XOXOO OOOOO XOXOO
// XOXOO OOOOO XOXOO
```

Reviewed By: ABataev

Differential Revision: https://reviews.llvm.org/D84192

show more ...


Revision tags: llvmorg-11.0.0, llvmorg-11.0.0-rc6, llvmorg-11.0.0-rc5, llvmorg-11.0.0-rc4, llvmorg-11.0.0-rc3, llvmorg-11.0.0-rc2
# 9f2f3b9d 29-Jul-2020 Joel E. Denny <jdenny.ornl@gmail.com>

[OpenMP] Implement TR8 `present` motion modifier in Clang (1/2)

This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
ne

[OpenMP] Implement TR8 `present` motion modifier in Clang (1/2)

This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.

Reviewed By: ABataev

Differential Revision: https://reviews.llvm.org/D84711

show more ...


# 69fc33f0 29-Jul-2020 Joel E. Denny <jdenny.ornl@gmail.com>

Revert "[OpenMP] Implement TR8 `present` motion modifier in Clang (1/2)"

This reverts commit 3c3faae497046be706df29e16c9fbccb7e1fce09.

It breaks a number of bots.


# 3c3faae4 28-Jul-2020 Joel E. Denny <jdenny.ornl@gmail.com>

[OpenMP] Implement TR8 `present` motion modifier in Clang (1/2)

This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
ne

[OpenMP] Implement TR8 `present` motion modifier in Clang (1/2)

This patch implements Clang front end support for the OpenMP TR8
`present` motion modifier for `omp target update` directives. The
next patch in this series implements OpenMP runtime support.

Reviewed By: ABataev

Differential Revision: https://reviews.llvm.org/D84711

show more ...


Revision tags: llvmorg-11.0.0-rc1, llvmorg-12-init
# 2da9572a 09-Jul-2020 cchen <cchen@cray.com>

[OPENMP50] extend array section for stride (Parsing/Sema/AST)

Reviewers: ABataev, jdoerfert

Reviewed By: ABataev

Subscribers: yaxunl, guansong, arphaman, sstefan1, cfe-commits, sandoval, dreachem

[OPENMP50] extend array section for stride (Parsing/Sema/AST)

Reviewers: ABataev, jdoerfert

Reviewed By: ABataev

Subscribers: yaxunl, guansong, arphaman, sstefan1, cfe-commits, sandoval, dreachem

Tags: #clang

Differential Revision: https://reviews.llvm.org/D82800

show more ...


Revision tags: llvmorg-10.0.1, llvmorg-10.0.1-rc4, llvmorg-10.0.1-rc3, llvmorg-10.0.1-rc2, llvmorg-10.0.1-rc1, llvmorg-10.0.0, llvmorg-10.0.0-rc6, llvmorg-10.0.0-rc5, llvmorg-10.0.0-rc4, llvmorg-10.0.0-rc3, llvmorg-10.0.0-rc2, llvmorg-10.0.0-rc1, llvmorg-11-init, llvmorg-9.0.1, llvmorg-9.0.1-rc3, llvmorg-9.0.1-rc2, llvmorg-9.0.1-rc1, llvmorg-9.0.0, llvmorg-9.0.0-rc6, llvmorg-9.0.0-rc5, llvmorg-9.0.0-rc4, llvmorg-9.0.0-rc3, llvmorg-9.0.0-rc2, llvmorg-9.0.0-rc1, llvmorg-10-init
# c2c21ef9 11-Jul-2019 Alexey Bataev <a.bataev@hotmail.com>

[OPENMP]Initial fix PR42392: Improve -Wuninitialized warnings for OpenMP programs.

Summary:
Some OpenMP clauses rely on the values of the variables. If the variable
is not initialized and used in Op

[OPENMP]Initial fix PR42392: Improve -Wuninitialized warnings for OpenMP programs.

Summary:
Some OpenMP clauses rely on the values of the variables. If the variable
is not initialized and used in OpenMP clauses that depend on the
variables values, it should be reported that the uninitialized variable
is used in the OpenMP clause expression.
This patch adds initial processing for uninitialized variables in OpenMP
constructs. Currently, it checks for use of the uninitialized variables
in the structured blocks.

Reviewers: NoQ, Szelethus, dcoughlin, xazax.hun, a.sidorin, george.karpenkov, szepet

Subscribers: rnkovacs, guansong, jfb, jdoerfert, cfe-commits

Tags: #clang

Differential Revision: https://reviews.llvm.org/D64356

llvm-svn: 365786

show more ...


Revision tags: llvmorg-8.0.1, llvmorg-8.0.1-rc4
# a914888b 08-Jul-2019 Alexey Bataev <a.bataev@hotmail.com>

[OPENMP]Add -Wunintialized to the erroneous tests for future fix PR42392,
NFC.

llvm-svn: 365334


Revision tags: llvmorg-8.0.1-rc3, llvmorg-8.0.1-rc2, llvmorg-8.0.1-rc1
# e04483ee 27-Mar-2019 Alexey Bataev <a.bataev@hotmail.com>

[OPENMP]Initial support for 'allocate' clause.

Added parsing/sema analysis of the allocate clause.

llvm-svn: 357068


Revision tags: llvmorg-8.0.0, llvmorg-8.0.0-rc5, llvmorg-8.0.0-rc4, llvmorg-8.0.0-rc3, llvmorg-7.1.0, llvmorg-7.1.0-rc1, llvmorg-8.0.0-rc2, llvmorg-8.0.0-rc1, llvmorg-7.0.1, llvmorg-7.0.1-rc3, llvmorg-7.0.1-rc2, llvmorg-7.0.1-rc1, llvmorg-7.0.0, llvmorg-7.0.0-rc3, llvmorg-7.0.0-rc2, llvmorg-7.0.0-rc1, llvmorg-6.0.1, llvmorg-6.0.1-rc3, llvmorg-6.0.1-rc2, llvmorg-6.0.1-rc1, llvmorg-5.0.2, llvmorg-5.0.2-rc2, llvmorg-5.0.2-rc1, llvmorg-6.0.0, llvmorg-6.0.0-rc3, llvmorg-6.0.0-rc2, llvmorg-6.0.0-rc1
# a8a9153a 29-Dec-2017 Alexey Bataev <a.bataev@hotmail.com>

[OPENMP] Support for -fopenmp-simd option with compilation of simd loops
only.

Added support for -fopenmp-simd option that allows compilation of
simd-based constructs without emission of OpenMP runt

[OPENMP] Support for -fopenmp-simd option with compilation of simd loops
only.

Added support for -fopenmp-simd option that allows compilation of
simd-based constructs without emission of OpenMP runtime calls.

llvm-svn: 321560

show more ...


Revision tags: llvmorg-5.0.1, llvmorg-5.0.1-rc3, llvmorg-5.0.1-rc2, llvmorg-5.0.1-rc1, llvmorg-5.0.0, llvmorg-5.0.0-rc5, llvmorg-5.0.0-rc4, llvmorg-5.0.0-rc3, llvmorg-5.0.0-rc2, llvmorg-5.0.0-rc1, llvmorg-4.0.1, llvmorg-4.0.1-rc3, llvmorg-4.0.1-rc2, llvmorg-4.0.1-rc1, llvmorg-4.0.0, llvmorg-4.0.0-rc4, llvmorg-4.0.0-rc3, llvmorg-4.0.0-rc2, llvmorg-4.0.0-rc1, llvmorg-3.9.1, llvmorg-3.9.1-rc3, llvmorg-3.9.1-rc2, llvmorg-3.9.1-rc1, llvmorg-3.9.0, llvmorg-3.9.0-rc3, llvmorg-3.9.0-rc2, llvmorg-3.9.0-rc1, llvmorg-3.8.1, llvmorg-3.8.1-rc1
# ec172c6d 26-May-2016 Samuel Antao <sfantao@us.ibm.com>

[OpenMP] Parsing and sema support for the from clause

Summary:
The patch contains the parsing and sema support for the `from` clause.

Patch based on the original post by Kelvin Li.

Reviewers: hfi

[OpenMP] Parsing and sema support for the from clause

Summary:
The patch contains the parsing and sema support for the `from` clause.

Patch based on the original post by Kelvin Li.

Reviewers: hfinkel, carlo.bertolli, kkwli0, arpith-jacob, ABataev

Subscribers: caomhin, cfe-commits

Differential Revision: http://reviews.llvm.org/D18488

llvm-svn: 270882

show more ...


# 661c0904 26-May-2016 Samuel Antao <sfantao@us.ibm.com>

[OpenMP] Parsing and sema support for the to clause

Summary:
The patch contains the parsing and sema support for the `to` clause.

Patch based on the original post by Kelvin Li.

Reviewers: carlo.b

[OpenMP] Parsing and sema support for the to clause

Summary:
The patch contains the parsing and sema support for the `to` clause.

Patch based on the original post by Kelvin Li.

Reviewers: carlo.bertolli, hfinkel, kkwli0, arpith-jacob, ABataev

Subscribers: caomhin, cfe-commits

Differential Revision: http://reviews.llvm.org/D18597

llvm-svn: 270880

show more ...


# 686c70c3 26-May-2016 Samuel Antao <sfantao@us.ibm.com>

[OpenMP] Parsing and sema support for target update directive

Summary:
This patch is to add parsing and sema support for `target update` directive. Support for the `to` and `from` clauses will be ad

[OpenMP] Parsing and sema support for target update directive

Summary:
This patch is to add parsing and sema support for `target update` directive. Support for the `to` and `from` clauses will be added by a different patch. This patch also adds support for other clauses that are already implemented upstream and apply to `target update`, e.g. `device` and `if`.

This patch is based on the original post by Kelvin Li.

Reviewers: hfinkel, carlo.bertolli, kkwli0, arpith-jacob, ABataev

Subscribers: caomhin, cfe-commits

Differential Revision: http://reviews.llvm.org/D15944

llvm-svn: 270878

show more ...