security: add UDP parameters for IPsec NAT-T

Add support for specifying UDP port params for UDP encapsulation option.
RFC3948 section-2.1 does not enforce using specific the UDP ports for
UDP-Encaps

security: add UDP parameters for IPsec NAT-T

Add support for specifying UDP port params for UDP encapsulation option.
RFC3948 section-2.1 does not enforce using specific the UDP ports for
UDP-Encapsulated ESP Header

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

security: add ESN field to IPsec xform

Update ipsec_xform definition to include ESN field.
This allows the application to control the ESN starting value.

Signed-off-by: Declan Doherty <declan.doher

security: add ESN field to IPsec xform

Update ipsec_xform definition to include ESN field.
This allows the application to control the ESN starting value.

Signed-off-by: Declan Doherty <declan.doherty@intel.com>
Signed-off-by: Radu Nicolau <radu.nicolau@intel.com>
Signed-off-by: Abhijit Sinha <abhijit.sinha@intel.com>
Signed-off-by: Daniel Martin Buckley <daniel.m.buckley@intel.com>
Acked-by: Fan Zhang <roy.fan.zhang@intel.com>
Acked-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

security: add SA config option for inner checksum

Add inner packet IPv4 hdr and L4 checksum enable options
in conf. These will be used in case of protocol offload.
Per SA, application could specify

security: add SA config option for inner checksum

Add inner packet IPv4 hdr and L4 checksum enable options
in conf. These will be used in case of protocol offload.
Per SA, application could specify whether the
checksum(compute/verify) can be offloaded to security device.

Signed-off-by: Archana Muniganti <marchana@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

security: add option to configure UDP ports verification

Add option to indicate whether UDP encapsulation ports
verification need to be done as part of inbound
IPsec processing.

Signed-off-by: Teja

security: add option to configure UDP ports verification

Add option to indicate whether UDP encapsulation ports
verification need to be done as part of inbound
IPsec processing.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

security: use net library to include IP structs

Remove the netinet includes and replaces them
with rte_ip.h to support the in_addr/in6_addr structs
on all operating systems.

Signed-off-by: Tal Shna

security: use net library to include IP structs

Remove the netinet includes and replaces them
with rte_ip.h to support the in_addr/in6_addr structs
on all operating systems.

Signed-off-by: Tal Shnaiderman <talshn@nvidia.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: William Tu <u9012063@gmail.com>

show more ...

security: add option to configure tunnel header verification

Add option to indicate whether outer header verification
need to be done as part of inbound IPsec processing.

With inline IPsec processi

security: add option to configure tunnel header verification

Add option to indicate whether outer header verification
need to be done as part of inbound IPsec processing.

With inline IPsec processing, SA lookup would be happening
in the Rx path of rte_ethdev. When rte_flow is configured to
support more than one SA, SPI would be used to lookup SA.
In such cases, additional verification would be required to
ensure duplicate SPIs are not getting processed in the inline path.

For lookaside cases, the same option can be used by application
to offload tunnel verification to the PMD.

These verifications would help in averting possible DoS attacks.

Signed-off-by: Tejasree Kondoj <ktejasree@marvell.com>
Acked-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

security: add SA lifetime configuration

Add SA lifetime configuration to register soft and hard expiry limits.
Expiry can be in units of number of packets or bytes. Crypto op
status is also updated

security: add SA lifetime configuration

Add SA lifetime configuration to register soft and hard expiry limits.
Expiry can be in units of number of packets or bytes. Crypto op
status is also updated to include new field, aux_flags, which can be
used to indicate cases such as soft expiry in case of lookaside
protocol operations.

In case of soft expiry, the packets are successfully IPsec processed but
the soft expiry would indicate that SA needs to be reconfigured. For
inline protocol capable ethdev, this would result in an eth event while
for lookaside protocol capable cryptodev, this can be communicated via
`rte_crypto_op.aux_flags` field.

In case of hard expiry, the packets will not be IPsec processed and
would result in error.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

security: support user-specified IV

Enabled user to provide IV to be used per security
operation. This would be used with lookaside protocol
offload for comparing against known vectors.

By default,

security: support user-specified IV

Enabled user to provide IV to be used per security
operation. This would be used with lookaside protocol
offload for comparing against known vectors.

By default, PMD would internally generate random IV.

Signed-off-by: Anoob Joseph <anoobj@marvell.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>

show more ...

security: add option for faster user/meta data access

Currently rte_security_set_pkt_metadata() and rte_security_get_userdata()
methods to set pkt metadata on Inline outbound and get userdata
after

security: add option for faster user/meta data access

Currently rte_security_set_pkt_metadata() and rte_security_get_userdata()
methods to set pkt metadata on Inline outbound and get userdata
after Inline inbound processing is always driver specific callbacks.

For drivers that do not have much to do in the callbacks but just
to update metadata in rte_security dynamic field and get userdata
from rte_security dynamic field, having to just to PMD specific
callback is costly per packet operation. This patch provides
a mechanism to do the same in inline function and avoid function
pointer jump if a driver supports the same.

Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Acked-by: Konstantin Ananyev <konstantin.ananyev@intel.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

security: support PDCP short MAC-I

This patch add support to handle PDCP short MAC-I domain
along with standard control and data domains as it has to
be treaty as special case with PDCP protocol off

security: support PDCP short MAC-I

This patch add support to handle PDCP short MAC-I domain
along with standard control and data domains as it has to
be treaty as special case with PDCP protocol offload support.

ShortMAC-I is the 16 least significant bits of calculated MAC-I. Usually
when a RRC message is exchanged between UE and eNodeB it is integrity &
ciphered protected.

MAC-I = f(key, varShortMAC-I, count, bearer, direction).
Here varShortMAC-I is prepared by using (current cellId, pci of source cell
and C-RNTI of old cell). Other parameters like count, bearer and
direction set to all 1.

crypto-perf app is updated to take short MAC as input mode.

Signed-off-by: Gagandeep Singh <g.singh@nxp.com>
Signed-off-by: Hemant Agrawal <hemant.agrawal@nxp.com>
Acked-by: Akhil Goyal <gakhil@marvell.com>

show more ...

lib: remove librte_ prefix from directory names

There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
m

lib: remove librte_ prefix from directory names

There is no reason for the DPDK libraries to all have 'librte_' prefix on
the directory names. This prefix makes the directory names longer and also
makes it awkward to add features referring to individual libraries in the
build - should the lib names be specified with or without the prefix.
Therefore, we can just remove the library prefix and use the library's
unique name as the directory name, i.e. 'eal' rather than 'librte_eal'

Signed-off-by: Bruce Richardson <bruce.richardson@intel.com>

show more ...