net/octeontx: add unicast MAC filter

At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses B

net/octeontx: add unicast MAC filter

At BGX, DMAC filter table can be enabled to allow defined hosts.
Patch implements 'mac_addr_add' and 'mac_addr_remove' ops to
add/remove MAC filters which uses BGX DMAC filter table.

Signed-off-by: Sunil Kumar Kori <skori@marvell.com>
Acked-by: Harman Kalra <hkalra@marvell.com>

show more ...

net/octeontx: set queue offload capabilities

Make Rx queue specific offloads same as device Rx offloads.

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

net/octeontx: add application domain validation

Add domain validation for PKI and PKO vfs

Signed-off-by: Pavan Nikhilesh <pbhagavatula@marvell.com>

ethdev: make stats and xstats reset callbacks return int

Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error

ethdev: make stats and xstats reset callbacks return int

Change return value of the callbacks from void to int. Make
implementations across all drivers return negative errno
values in case of error conditions.

Both callbacks are updated together because a large number of
drivers assign the same function to both callbacks.

Signed-off-by: Igor Romanov <igor.romanov@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

ethdev: change promiscuous callbacks to return status

Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.

When corr

ethdev: change promiscuous callbacks to return status

Enabling/disabling of promiscuous mode is not always successful and
it should be taken into account to be able to handle it properly.

When correct return status is unclear from driver code, -EAGAIN is used.

Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Matan Azrad <matan@mellanox.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

ethdev: change device info get callback to return int

Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno v

ethdev: change device info get callback to return int

Change eth_dev_infos_get_t return value from void to int.
Make eth_dev_infos_get_t implementations across all drivers to return
negative errno values if case of error conditions.

Signed-off-by: Ivan Ilchenko <ivan.ilchenko@oktetlabs.ru>
Signed-off-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net/octeontx: use driver log type

All log messages should use driver logtype. RTE_LOGTYPE_PMD is
planned to be deprecated in the future.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org

net/octeontx: use driver log type

All log messages should use driver logtype. RTE_LOGTYPE_PMD is
planned to be deprecated in the future.

Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Acked-by: Jerin Jacob <jerinj@marvell.com>

show more ...

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_C

net: add rte prefix to ether defines

Add 'RTE_' prefix to defines:
- rename ETHER_ADDR_LEN as RTE_ETHER_ADDR_LEN.
- rename ETHER_TYPE_LEN as RTE_ETHER_TYPE_LEN.
- rename ETHER_CRC_LEN as RTE_ETHER_CRC_LEN.
- rename ETHER_HDR_LEN as RTE_ETHER_HDR_LEN.
- rename ETHER_MIN_LEN as RTE_ETHER_MIN_LEN.
- rename ETHER_MAX_LEN as RTE_ETHER_MAX_LEN.
- rename ETHER_MTU as RTE_ETHER_MTU.
- rename ETHER_MAX_VLAN_FRAME_LEN as RTE_ETHER_MAX_VLAN_FRAME_LEN.
- rename ETHER_MAX_VLAN_ID as RTE_ETHER_MAX_VLAN_ID.
- rename ETHER_MAX_JUMBO_FRAME_LEN as RTE_ETHER_MAX_JUMBO_FRAME_LEN.
- rename ETHER_MIN_MTU as RTE_ETHER_MIN_MTU.
- rename ETHER_LOCAL_ADMIN_ADDR as RTE_ETHER_LOCAL_ADMIN_ADDR.
- rename ETHER_GROUP_ADDR as RTE_ETHER_GROUP_ADDR.
- rename ETHER_TYPE_IPv4 as RTE_ETHER_TYPE_IPv4.
- rename ETHER_TYPE_IPv6 as RTE_ETHER_TYPE_IPv6.
- rename ETHER_TYPE_ARP as RTE_ETHER_TYPE_ARP.
- rename ETHER_TYPE_VLAN as RTE_ETHER_TYPE_VLAN.
- rename ETHER_TYPE_RARP as RTE_ETHER_TYPE_RARP.
- rename ETHER_TYPE_QINQ as RTE_ETHER_TYPE_QINQ.
- rename ETHER_TYPE_ETAG as RTE_ETHER_TYPE_ETAG.
- rename ETHER_TYPE_1588 as RTE_ETHER_TYPE_1588.
- rename ETHER_TYPE_SLOW as RTE_ETHER_TYPE_SLOW.
- rename ETHER_TYPE_TEB as RTE_ETHER_TYPE_TEB.
- rename ETHER_TYPE_LLDP as RTE_ETHER_TYPE_LLDP.
- rename ETHER_TYPE_MPLS as RTE_ETHER_TYPE_MPLS.
- rename ETHER_TYPE_MPLSM as RTE_ETHER_TYPE_MPLSM.
- rename ETHER_VXLAN_HLEN as RTE_ETHER_VXLAN_HLEN.
- rename ETHER_ADDR_FMT_SIZE as RTE_ETHER_ADDR_FMT_SIZE.
- rename VXLAN_GPE_TYPE_IPV4 as RTE_VXLAN_GPE_TYPE_IPV4.
- rename VXLAN_GPE_TYPE_IPV6 as RTE_VXLAN_GPE_TYPE_IPV6.
- rename VXLAN_GPE_TYPE_ETH as RTE_VXLAN_GPE_TYPE_ETH.
- rename VXLAN_GPE_TYPE_NSH as RTE_VXLAN_GPE_TYPE_NSH.
- rename VXLAN_GPE_TYPE_MPLS as RTE_VXLAN_GPE_TYPE_MPLS.
- rename VXLAN_GPE_TYPE_GBP as RTE_VXLAN_GPE_TYPE_GBP.
- rename VXLAN_GPE_TYPE_VBNG as RTE_VXLAN_GPE_TYPE_VBNG.
- rename ETHER_VXLAN_GPE_HLEN as RTE_ETHER_VXLAN_GPE_HLEN.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_

net: add rte prefix to ether structures

Add 'rte_' prefix to structures:
- rename struct ether_addr as struct rte_ether_addr.
- rename struct ether_hdr as struct rte_ether_hdr.
- rename struct vlan_hdr as struct rte_vlan_hdr.
- rename struct vxlan_hdr as struct rte_vxlan_hdr.
- rename struct vxlan_gpe_hdr as struct rte_vxlan_gpe_hdr.

Do not update the command line library to avoid adding a dependency to
librte_net.

Signed-off-by: Olivier Matz <olivier.matz@6wind.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Reviewed-by: Ferruh Yigit <ferruh.yigit@intel.com>

show more ...

net/octeontx: fix failures when available ports > queues

When eth_octeontx is initialized before event_octeontx, eth_octeontx
would initiate setting up of the event device with the max ports and
que

net/octeontx: fix failures when available ports > queues

When eth_octeontx is initialized before event_octeontx, eth_octeontx
would initiate setting up of the event device with the max ports and
queues available. If number of ports is more than the number of queues,
some ports would be left unused when the ports and queues are mapped
1:1. But even in that case the ports need to be setup, or otherwise it
would lead to a segmentation fault when event device is started.

Fixes: f7be70e5130e ("net/octeontx: add net device probe and remove")
Cc: stable@dpdk.org

Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

net/octeontx: fix mbuf corruption with large private sizes

When the priv_size of the mbuf is > 128 bytes, the mbuf would not be
properly constructed. This would lead to a corrupt mbuf.

This patch f

net/octeontx: fix mbuf corruption with large private sizes

When the priv_size of the mbuf is > 128 bytes, the mbuf would not be
properly constructed. This would lead to a corrupt mbuf.

This patch fixes the issue by accounting for
rte_pktmbuf_priv_size(pool) and RTE_PKTMBUF_HEADROOM
while configuring first skip register calculation.

Fixes: 197438ee9f18 ("net/octeontx: add Rx queue setup and release ops")
Cc: stable@dpdk.org

Suggested-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Signed-off-by: Anoob Joseph <anoob.joseph@caviumnetworks.com>
Signed-off-by: Nitin Saxena <nitin.saxena@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

ethdev: remove release function for secondary process

After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with r

ethdev: remove release function for secondary process

After previous changes, the function rte_eth_dev_release_port()
can be used for primary or secondary process as well.
The only difference with rte_eth_dev_release_port_secondary()
is the shared lock used in rte_eth_dev_release_port().

The function rte_eth_dev_release_port_secondary() was recently
added in 18.11 cycle.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

ethdev: free all common data when releasing port

This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.

ethdev: free all common data when releasing port

This is a clean-up of common ethdev data freeing.
All data freeing are moved to rte_eth_dev_release_port()
and done only in case of primary process.

It is probably fixing some memory leaks for PMDs which were
not freeing all data.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>

show more ...

drivers/net: enable hotplug on secondary process

Attach port from secondary should ignore devargs since the private
device is not necessary to support. Also previously, detach port on
a secondary pr

drivers/net: enable hotplug on secondary process

Attach port from secondary should ignore devargs since the private
device is not necessary to support. Also previously, detach port on
a secondary process will mess primary process and cause the same
device can't be attached back again. A secondary process should use
rte_eth_dev_release_port_secondary to release a port.

Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>

show more ...

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keepin

ethdev: make default behavior CRC strip on Rx

Removed DEV_RX_OFFLOAD_CRC_STRIP offload flag.
Without any specific Rx offload flag, default behavior by PMDs is to
strip CRC.

PMDs that support keeping CRC should advertise DEV_RX_OFFLOAD_KEEP_CRC
Rx offload capability.

Applications that require keeping CRC should check PMD capability first
and if it is supported can enable this feature by setting
DEV_RX_OFFLOAD_KEEP_CRC in Rx offload flag in rte_eth_dev_configure()

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Tomasz Duszynski <tdu@semihalf.com>
Acked-by: Shahaf Shuler <shahafs@mellanox.com>
Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Acked-by: Jan Remes <remes@netcope.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>
Acked-by: Hyong Youb Kim <hyonkim@cisco.com>

show more ...

net/octeontx: fix stop clearing Rx/Tx functions

On dev_stop the Rx/Tx_burst functions are being set to NULL, this causes
a SEGFAULT in cases where control path calls stop and a paket is still
being

net/octeontx: fix stop clearing Rx/Tx functions

On dev_stop the Rx/Tx_burst functions are being set to NULL, this causes
a SEGFAULT in cases where control path calls stop and a paket is still
being processed by a worker.
Instead clear the fastpath functions in dev_close.

Fixes: da6c687471a3 ("net/octeontx: add start and stop support")
Cc: stable@dpdk.org

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

drivers/net: fix crash in secondary process

Calling rte_eth_dev_info_get() on secondary process cause a crash
because eth_dev->device is not set properly.

Fixes: ee27edbe0c10 ("drivers/net: share v

drivers/net: fix crash in secondary process

Calling rte_eth_dev_info_get() on secondary process cause a crash
because eth_dev->device is not set properly.

Fixes: ee27edbe0c10 ("drivers/net: share vdev data to secondary process")
Cc: stable@dpdk.org

Reported-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>

show more ...

mempool/octeontx: fix pool to aura mapping

HW needs each pool to be mapped to an aura set of 16 auras.
Previously, pool to aura mapping was considered to be 1:1.

Fixes: 02fd6c744350 ("mempool/octeo

mempool/octeontx: fix pool to aura mapping

HW needs each pool to be mapped to an aura set of 16 auras.
Previously, pool to aura mapping was considered to be 1:1.

Fixes: 02fd6c744350 ("mempool/octeontx: support allocation")
Cc: stable@dpdk.org

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>
Acked-by: Santosh Shukla <santosh.shukla@caviumnetworks.com>
Acked-by: Jerin Jacob <jerin.jacob@caviumnetworks.com>

show more ...

remove useless constructor headers

A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the fu

remove useless constructor headers

A constructor is usually declared with RTE_INIT* macros.
As it is a static function, no need to declare before its definition.
The macro is used directly in the function definition.

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

ethdev: add new offload flag to keep CRC

DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.

DEV_RX_OFFLOAD_CRC_STRIP flag will re

ethdev: add new offload flag to keep CRC

DEV_RX_OFFLOAD_KEEP_CRC offload flag is added. PMDs that support
keeping CRC should advertise this offload capability.

DEV_RX_OFFLOAD_CRC_STRIP flag will remain one more release
default behavior in PMDs are to keep the CRC until this flag removed

Until DEV_RX_OFFLOAD_CRC_STRIP flag is removed:
- Setting both KEEP_CRC & CRC_STRIP is INVALID
- Setting only CRC_STRIP PMD should strip the CRC
- Setting only KEEP_CRC PMD should keep the CRC
- Not setting both PMD should keep the CRC

A helper function rte_eth_dev_is_keep_crc() has been added to be able to
change the no flag behavior with minimal changes in PMDs.

The PMDs that doesn't report the DEV_RX_OFFLOAD_KEEP_CRC offload can
remove rte_eth_dev_is_keep_crc() checks next release, related code
commented to help the maintenance task.

And DEV_RX_OFFLOAD_CRC_STRIP has been added to virtual drivers since
they don't use CRC at all, when an application requires this offload
virtual PMDs should not return error.

Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Acked-by: Allain Legacy <allain.legacy@windriver.com>
Acked-by: Andrew Rybchenko <arybchenko@solarflare.com>
Acked-by: Thomas Monjalon <thomas@monjalon.net>

show more ...

ethdev: add probing finish function

A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary

ethdev: add probing finish function

A new hook function is added and called inside the PMDs at the end
of the device probing:
- in primary process, after allocating, init and config
- in secondary process, after attaching and local init

This new function is almost empty for now.
It will be used later to add some post-initialization processing.

For the PMDs calling the helpers rte_eth_dev_create() or
rte_eth_dev_pci_generic_probe(), the hook rte_eth_dev_probing_finish()
is called from here, and not in the PMD itself.

Note that the helper rte_eth_dev_create() could be used more,
especially for vdevs, avoiding some code duplication in PMDs.

Cc: stable@dpdk.org

Signed-off-by: Thomas Monjalon <thomas@monjalon.net>
Reviewed-by: Andrew Rybchenko <arybchenko@solarflare.com>
Reviewed-by: Stephen Hemminger <stephen@networkplumber.org>

show more ...

ethdev: new Rx/Tx offloads API

This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by

ethdev: new Rx/Tx offloads API

This patch check if a input requested offloading is valid or not.
Any reuqested offloading must be supported in the device capabilities.
Any offloading is disabled by default if it is not set in the parameter
dev_conf->[rt]xmode.offloads to rte_eth_dev_configure() and
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If any offloading is enabled in rte_eth_dev_configure() by application,
it is enabled on all queues no matter whether it is per-queue or
per-port type and no matter whether it is set or cleared in
[rt]x_conf->offloads to rte_eth_[rt]x_queue_setup().
If a per-queue offloading hasn't be enabled in rte_eth_dev_configure(),
it can be enabled or disabled for individual queue in
ret_eth_[rt]x_queue_setup().
A new added offloading is the one which hasn't been enabled in
rte_eth_dev_configure() and is reuqested to be enabled in
rte_eth_[rt]x_queue_setup(), it must be per-queue type,
otherwise trigger an error log.
The underlying PMD must be aware that the requested offloadings
to PMD specific queue_setup() function only carries those
new added offloadings of per-queue type.

This patch can make above such checking in a common way in rte_ethdev
layer to avoid same checking in underlying PMD.

This patch assumes that all PMDs in 18.05-rc2 have already
converted to offload API defined in 17.11 . It also assumes
that all PMDs can return correct offloading capabilities
in rte_eth_dev_infos_get().

In the beginning of [rt]x_queue_setup() of underlying PMD,
add offloads = [rt]xconf->offloads |
dev->data->dev_conf.[rt]xmode.offloads; to keep same as offload API
defined in 17.11 to avoid upper application broken due to offload
API change.
PMD can use the info that input [rt]xconf->offloads only carry
the new added per-queue offloads to do some optimization or some
code change on base of this patch.

Signed-off-by: Wei Dai <wei.dai@intel.com>
Signed-off-by: Ferruh Yigit <ferruh.yigit@intel.com>
Signed-off-by: Qi Zhang <qi.z.zhang@intel.com>

show more ...

net/octeontx: fix missing offload flags

Fix missing DEV_RX_OFFLOAD_CHECKSUM flag in RX offloads.
Remove depricated txq_flags field.

Fixes: a92870896b4a ("net/octeontx: use the new offload APIs")

S

net/octeontx: fix missing offload flags

Fix missing DEV_RX_OFFLOAD_CHECKSUM flag in RX offloads.
Remove depricated txq_flags field.

Fixes: a92870896b4a ("net/octeontx: use the new offload APIs")

Signed-off-by: Pavan Nikhilesh <pbhagavatula@caviumnetworks.com>

show more ...

drivers/net: share vdev data to secondary process

dpdk-procinfo, as a secondary process, cannot fetch stats for vdev.

This patch enables that by attaching the port from the shared data.
We also fil

drivers/net: share vdev data to secondary process

dpdk-procinfo, as a secondary process, cannot fetch stats for vdev.

This patch enables that by attaching the port from the shared data.
We also fill the eth dev ops, with only some ops works in secondary
process, for example, stats_get().

Note that, we still cannot Rx/Tx packets on the ports which do not
support multi-process.

Reported-by: Signed-off-by: Vipin Varghese <vipin.varghese@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>

show more ...

drivers/net: do not use private ethdev data

We introduced private rte_eth_dev_data to allow vdev to be created
both in primary process and secondary process(es). This is not
friendly to multi-proces

drivers/net: do not use private ethdev data

We introduced private rte_eth_dev_data to allow vdev to be created
both in primary process and secondary process(es). This is not
friendly to multi-process model, for example, it leads to port id
contention issue if two processes both find the data entry is free.

And to get stats of primary vdev in secondary, we must allocate
from the pre-defined array so that we can find it.

Suggested-by: Bruce Richardson <bruce.richardson@intel.com>
Signed-off-by: Jianfeng Tan <jianfeng.tan@intel.com>
Reviewed-by: Qi Zhang <qi.z.zhang@intel.com>

show more ...