| /onnv-gate/usr/src/cmd/sgs/elfedit/modules/common/ |
| H A D | cap.msg | 54 specified id: %s\n"
90 specified id name.\n"
94 integer. If the specified string already exists in the\n\
106 in the capabilities section that has the specified tag value\n\
107 will be used. The value specified can be one of the well known\n\
110 If the -capndx option is specified, elt is instead interpreted\n\
114 Value to be set for c_tag field of specified capabilities\n\
115 element. Tag values can be specified using the well known\n\
122 element with the specified tag value will be used. Tag values\n\
123 can be specified using the well known CA_ symbolic constants\n\
[all …]
|
| H A D | phdr.msg | 64 @ MSG_ERR_NOPHDR "No program header with specified type available: %s\n"
98 specified type will be used. If the -phndx option is used,\n\
100 specified program header element.\n"
140 at the specified position. This value cannot exceed the number\n\
141 of slots remaining in the header table below the specified.\n\
151 header table below the specified position. If count is not\n\
174 program header specified is displayed. If both arguments are\n\
176 specified position is set to the given value.\n"
180 p_offset field of the specified program header.\n\
188 of the element specified is displayed. If both arguments are\n\
[all …]
|
| H A D | dyn.msg | 103 dynamic section that has the specified tag type, creating\n\
104 a new element only if no element of the specified type\n\
105 exists, and if room exists in the file. If -add is specified,\n\
111 integer. If the specified string already exists in the dynamic\n\
122 Use the dynamic element with the specified index.\n"
137 dynamic section that has the specified tag value will be used.\n\
138 The value specified can be one of the well known DT_ constants,\n\
141 If the -dynndx option is specified, elt is instead interpreted\n\
145 Value to be set for d_tag field of specified dynamic\n\
146 element. Tag values can be specified using the well known\n\
[all …]
|
| H A D | shdr.msg | 94 specified name will be used as the value.\n"
98 as an integer. The index of the first section of the specified\n\
108 index of the first section with the specified name is used.\n\
117 section with the specified type is used.\n"
189 present, the sh_addr field of the section at the specified\n\
208 present, the sh_addralign field of the section at the specified\n\
225 present, the sh_entsize field of the section at the specified\n\
241 o\tIf the -cmp option has been specified, the new value\n\
245 \tthe new value. If -and is specified, the new value is\n\
246 \tAND'd against the existing value. If -or is specified,\n\
[all …]
|
| H A D | sym.msg | 81 explicitly specified (-shnam, -shndx, or \
109 specified section index, even if it is small enough to fit\n\
114 specified index.\n"
117 specified name.\n"
120 the specified section type.\n"
136 to use must be explicitly specified (-shnam, -shndx, or\n\
166 The section index of the first section with the specified\n\
176 section with the specified type is used.\n"
221 field of the symbol at the specified index is set to the given\n\
226 st_info field of the specified symbol. It provides raw access\n\
[all …]
|
| H A D | str.msg | 87 If -any is set, then the specified section is used without\n\
105 specified name. If this is a string table section, it\n\
112 specified index. If this is a string table section, it\n\
142 Number of null bytes to write at specified offset.\n"
188 for the specified string in the table and using its offset.\n\
195 the specified offset. The new string can have any length, as\n\
198 unless the -noterm option is specified. However, -noterm cannot\n\
205 \tthe specified offset, it will overwrite the start of\n\
223 The str:add command examines the specified string table to\n\
238 The str:zero command is used to set a portion of the specified\n\
[all …]
|
| /onnv-gate/usr/src/cmd/cdrw/ |
| H A D | options.c | 64 compare_options_mask(options *msk, options *specified) in compare_options_mask() argument
70 if (msk->bitmap[i] == specified->bitmap[i]) in compare_options_mask()
72 bmap = msk->bitmap[i] | specified->bitmap[i]; in compare_options_mask()
|
| /onnv-gate/usr/src/common/openssl/doc/apps/ |
| H A D | ecparam.pod | 50 this option is not specified.
77 Use the EC parameters with the specified 'short' name. Use B<-list_curves>
82 If this options is specified B<ecparam> will print out a list of all
99 specified by a OID, or B<explicit> where the ec parameters are
102 B<Note> the B<implicitlyCA> alternative ,as specified in RFC 3279,
112 This option will generate a EC private key using the specified parameters.
118 Multiple files can be specified separated by a OS-dependent character.
125 to attempt to obtain a functional reference to the specified engine,
|
| H A D | genrsa.pod | 31 the output filename. If this argument is not specified then standard output is
43 specified no encryption is used. If encryption is used a pass phrase is prompted
54 Multiple files can be specified separated by a OS-dependent character.
61 to attempt to obtain a functional reference to the specified engine,
68 specified. The default is 512.
|
| H A D | ocsp.pod | 75 multiple times. The certificate specified in B<filename> must be in
82 issuer certificate is specified.
89 be specified by preceding the value by a B<-> sign.
93 Sign the OCSP request using the certificate specified in the B<signer>
94 option and the private key specified by the B<signkey> option. If
96 from the same file as the certificate. If neither option is specified then
127 specify the responder URL. Both HTTP and HTTPS (SSL/TLS) URLs can be specified.
149 the certificates specified by the B<-verify_certs> option should be explicitly
168 signers certificate. With this option the signers certificate must be specified
220 If the B<index> option is specified the B<ocsp> utility is in responder mode, otherwise
[all …]
|
| H A D | ec.pod | 32 private key format specified in 'SEC 1: Elliptic Curve Cryptography'
44 uses the SubjectPublicKeyInfo structur as specified in RFC 3280.
57 option is not specified. If the key is encrypted a pass phrase will be
68 is not specified. If any encryption options are set then a pass phrase will be
82 If none of these options is specified the key is written in plain text. This
125 specified by a OID, or B<explicit> where the ec parameters are
128 B<Note> the B<implicitlyCA> alternative ,as specified in RFC 3279,
134 to attempt to obtain a functional reference to the specified engine,
|
| H A D | req.pod | 72 if this option is not specified. A request is only read if the creation
73 options (B<-new> and B<-newkey>) are not specified.
115 prompted for and their maximum and minimum sizes are specified
119 key using information specified in the configuration file.
125 Multiple files can be specified separated by a OS-dependent character.
144 the format of the private key file specified in the B<-key>
150 If this option is not specified then the filename present in the
155 if this option is specified then if a private key is created it
161 overrides the digest algorithm specified in the configuration file.
166 this allows an alternative configuration file to be specified,
[all …]
|
| H A D | gendsa.pod | 31 If none of these options is specified no encryption is used.
37 Multiple files can be specified separated by a OS-dependent character.
44 to attempt to obtain a functional reference to the specified engine,
|
| H A D | dsaparam.pod | 45 this option is not specified. If the B<numbits> parameter is included then
69 this option will generate a DSA either using the specified or generated
76 Multiple files can be specified separated by a OS-dependent character.
89 to attempt to obtain a functional reference to the specified engine,
|
| H A D | pkcs7.pod | 41 option is not specified.
66 to attempt to obtain a functional reference to the specified engine,
98 This PKCS#7 routines only understand PKCS#7 v 1.5 as specified in RFC2315 they
|
| H A D | rand.pod | 34 Use specified file or files or EGD socket (see L<RAND_egd(3)|RAND_egd(3)>)
36 Multiple files can be specified separated by a OS-dependent character.
|
| /onnv-gate/usr/src/cmd/perl/contrib/Sun/Solaris/Privilege/pod/ |
| H A D | Privilege.pod | 26 This function returns the process privilege set specified by $which.
30 This function modified the privilege set specified by $which in the
31 as specified by the $op and $set arguments. If $op is PRIV_ON the
32 privileges in $set are added to the set specified; if $op is PRIV_OFF,
33 the privileges in $set are removed from the set specified; if $op
34 is PRIV_SET, the specified set is made equal to $set.
|
| /onnv-gate/usr/src/cmd/perl/contrib/Sun/Solaris/Project/pod/ |
| H A D | Project.pod | 36 If C<$user> is a member of the project specified by C<$project>,
72 This function searches the project database for an entry with the specified
78 This function searches the project database for an entry with the specified
84 This function returns the default project entry for the specified user in the
97 This function checks whether the specified user is able to use the project.
103 This function searches the project database for the specified project. It
|
| /onnv-gate/usr/src/cmd/cmd-inet/usr.sadm/dhcpmgr/com/sun/dhcpmgr/cli/pntadm/ |
| H A D | ResourceBundle.properties | 39 # No network specified error
41 no_network_specified=This function requires a network to be specified.
44 # No network specified error
49 # No client ID specified error
54 # No macro specified error
|
| /onnv-gate/usr/src/cmd/perl/contrib/Sun/Solaris/Lgrp/pod/ |
| H A D | Lgrp.pod | 229 the specified process or thread. Otherwise, B<undef> is returned and B<$!> is
247 returns the list of CPUs in the lgroup specified by B<$lgrp>. The B<$context>
265 CPUs, contained in the specified lgroup.
275 returns the list of lgroups that are children of the specified lgroup.
278 children lgroups for the specified lgroup.
288 returns the list of parent of the specified lgroup.
291 parent lgroups for the specified lgroup.
382 The function sets of LWPs specified by the B<$idtype> and B<$id> arguments have
385 The function sets the affinity that the LWP or set of LWPs specified by $idtype
393 process is specified.
[all …]
|
| /onnv-gate/usr/src/cmd/fm/dicts/ |
| H A D | PCIEX.po | 83 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
99 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
211 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
227 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
243 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
259 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
275 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
291 msgstr "A problem has been detected on one of the specified devices or on one of the specified conn…
307 msgstr "Too many recovered internal errors have been detected within the specified PCIEX device. Th…
323 …ors have been detected, which indicates a problem with the specified bus or with the specified tra…
[all …]
|
| /onnv-gate/usr/src/common/openssl/doc/ssl/ |
| H A D | SSL_CTX_add_extra_chain_cert.pod | 22 these certificates explicitly specified. If no chain is specified,
|
| /onnv-gate/usr/src/common/openssl/crypto/des/ |
| H A D | des.pod | 49 (for decrypt) must be specified.
61 (specified with
92 is specified and writes to standard output unless
135 If a filename was specified after the
163 specified.
181 output. If there is no name specified after the B<-u>, the name text.des
|
| /onnv-gate/usr/src/cmd/cmd-inet/etc/ |
| H A D | wanboot.conf.sample | 37 # otherwise specified).
53 # If an encryption_type is specified then a signature_type must also
54 # be specified.
73 # hostnames specified in any of the URLs in the wanboot.conf file,
|
| /onnv-gate/usr/src/uts/intel/os/ |
| H A D | mach | 26 # CAUTION! The order of modules specified here is very important. If the
28 # loading of modules is in the reverse order specified here (i.e. the last
|