xref: /netbsd-src/sys/arch/evbarm/lubbock/lubbock_lcd.c (revision 7433666e375b3ac4cc764df5a6726be98bc1cdd5)
1 /* $NetBSD: lubbock_lcd.c,v 1.18 2023/12/20 13:55:18 thorpej Exp $ */
2 
3 /*
4  * Copyright (c) 2002, 2003  Genetec Corporation.  All rights reserved.
5  * Written by Hiroyuki Bessho for Genetec Corporation.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer.
12  * 2. Redistributions in binary form must reproduce the above copyright
13  *    notice, this list of conditions and the following disclaimer in the
14  *    documentation and/or other materials provided with the distribution.
15  * 3. The name of Genetec Corporation may not be used to endorse or
16  *    promote products derived from this software without specific prior
17  *    written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY GENETEC CORPORATION ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
21  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
22  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL GENETEC CORPORATION
23  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
24  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
25  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
26  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
27  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
28  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
29  * POSSIBILITY OF SUCH DAMAGE.
30  */
31 
32 /*
33  * LCD driver for Intel Lubbock.
34  *
35  * Controlling LCD is almost completely done through PXA2X0's
36  * integrated LCD controller.  Codes for it is arm/xscale/pxa2x0_lcd.c.
37  *
38  * Codes in this file provide platform specific things including:
39  *   LCD on/off switch in on-board PLD register.
40  *   LCD panel geometry
41  */
42 #include <sys/cdefs.h>
43 __KERNEL_RCSID(0, "$NetBSD: lubbock_lcd.c,v 1.18 2023/12/20 13:55:18 thorpej Exp $");
44 
45 #include <sys/param.h>
46 #include <sys/systm.h>
47 #include <sys/conf.h>
48 #include <sys/uio.h>
49 
50 #include <dev/cons.h>
51 #include <dev/wscons/wsconsio.h>
52 #include <dev/wscons/wsdisplayvar.h>
53 #include <dev/wscons/wscons_callbacks.h>
54 
55 #include <sys/bus.h>
56 #include <arm/xscale/pxa2x0var.h>
57 #include <arm/xscale/pxa2x0reg.h>
58 #include <arm/xscale/pxa2x0_lcd.h>
59 
60 #include <arch/evbarm/lubbock/lubbock_reg.h>
61 #include <arch/evbarm/lubbock/lubbock_var.h>
62 
63 #include "wsdisplay.h"
64 
65 int	lcd_match(device_t, cfdata_t, void *);
66 void	lcd_attach(device_t, device_t, void *);
67 int	lcdintr(void *);
68 
69 #if NWSDISPLAY > 0
70 
71 /*
72  * wsdisplay glue
73  */
74 struct pxa2x0_wsscreen_descr lcd_bpp16_screen = {
75 	{
76 		"bpp16", 0, 0,
77 		&pxa2x0_lcd_emulops,
78 		0, 0,
79 		WSSCREEN_WSCOLORS,
80 	},
81 	16				/* bits per pixel */
82 }, lcd_bpp8_screen = {
83 	{
84 		"bpp8", 0, 0,
85 		&pxa2x0_lcd_emulops,
86 		0, 0,
87 		WSSCREEN_WSCOLORS,
88 	},
89 	8				/* bits per pixel */
90 }, lcd_bpp4_screen = {
91 	{
92 		"bpp4", 0, 0,
93 		&pxa2x0_lcd_emulops,
94 		0, 0,
95 		WSSCREEN_WSCOLORS,
96 	},
97 	4				/* bits per pixel */
98 };
99 
100 
101 static const struct wsscreen_descr *lcd_scr_descr[] = {
102 #if 0
103 	/* bpp4 needs a patch to rasops4 */
104 	&lcd_bpp4_screen.c,
105 #endif
106 	&lcd_bpp8_screen.c,
107 	&lcd_bpp16_screen.c,
108 };
109 
110 const struct wsscreen_list lcd_screen_list = {
111 	sizeof lcd_scr_descr / sizeof lcd_scr_descr[0],
112 	lcd_scr_descr
113 };
114 
115 int	lcd_ioctl(void *, void *, u_long, void *, int, struct lwp *);
116 
117 int	lcd_show_screen(void *, void *, int,
118 	    void (*)(void *, int, int), void *);
119 
120 const struct wsdisplay_accessops lcd_accessops = {
121 	lcd_ioctl,
122 	pxa2x0_lcd_mmap,
123 	pxa2x0_lcd_alloc_screen,
124 	pxa2x0_lcd_free_screen,
125 	lcd_show_screen,
126 	NULL, /* load_font */
127 };
128 
129 #else
130 /*
131  * Interface to LCD framebuffer without wscons
132  */
133 dev_type_open(lcdopen);
134 dev_type_close(lcdclose);
135 dev_type_ioctl(lcdioctl);
136 dev_type_mmap(lcdmmap);
137 const struct cdevsw lcd_cdevsw = {
138 	.d_open = lcdopen,
139 	.d_close = lcdclose,
140 	.d_read = noread,
141 	.d_write = nowrite,
142 	.d_ioctl = lcdioctl,
143 	.d_stop = nostop,
144 	.d_tty = notty,
145 	.d_poll = nopoll,
146 	.d_mmap = lcdmmap,
147 	.d_kqfilter = nokqfilter,
148 	.d_discard = nodiscard,
149 	.d_flag = D_TTY
150 };
151 
152 #endif
153 
154 CFATTACH_DECL_NEW(lcd_obio, sizeof (struct pxa2x0_lcd_softc),  lcd_match,
155     lcd_attach, NULL, NULL);
156 
157 int
lcd_match(device_t parent,cfdata_t cf,void * aux)158 lcd_match( device_t parent, cfdata_t cf, void *aux )
159 {
160 	return 1;
161 }
162 
163 static const struct lcd_panel_geometry sharp_LM8V31 =
164 {
165     640,			/* Width */
166     480,			/* Height */
167     0,				/* No extra lines */
168 
169     LCDPANEL_DUAL|LCDPANEL_PASSIVE|LCDPANEL_PCP,
170     10,				/* clock divider */
171     0xff,			/* AC bias pin freq */
172 
173     2,				/* horizontal sync pulse width */
174     3,				/* BLW */
175     3,				/* ELW */
176 
177     1,				/* vertical sync pulse width */
178     0,				/* BFW */
179     0,				/* EFW */
180 
181 };
182 
lcd_attach(device_t parent,device_t self,void * aux)183 void lcd_attach( device_t parent, device_t self, void *aux )
184 {
185 	struct pxa2x0_lcd_softc *sc = device_private(self);
186 	struct obio_attach_args *oba = aux;
187 	struct pxaip_attach_args paa;
188 
189 	sc->dev = self;
190 
191 	paa.pxa_name = "obio";
192 	paa.pxa_iot = oba->oba_iot;
193 	paa.pxa_addr = oba->oba_addr;
194 	paa.pxa_size = 0;		/* XXX */
195 	paa.pxa_intr = oba->oba_intr;
196 
197 	pxa2x0_lcd_attach_sub(sc, &paa, &sharp_LM8V31);
198 
199 
200 #if NWSDISPLAY > 0
201 
202 	{
203 		struct wsemuldisplaydev_attach_args aa;
204 
205 		/* make wsdisplay screen list */
206 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp16_screen, &sharp_LM8V31, NULL );
207 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp8_screen, &sharp_LM8V31, NULL );
208 		pxa2x0_lcd_setup_wsscreen( &lcd_bpp4_screen, &sharp_LM8V31, NULL );
209 
210 		aa.console = 0;
211 		aa.scrdata = &lcd_screen_list;
212 		aa.accessops = &lcd_accessops;
213 		aa.accesscookie = sc;
214 
215 		(void) config_found(self, &aa, wsemuldisplaydevprint,
216 		    CFARGS_NONE);
217 	}
218 #else
219 	{
220 		struct pxa2x0_lcd_screen *screen;
221 		int error;
222 
223 		error = pxa2x0_lcd_new_screen( sc, 8, &screen );
224 		if( error == 0 ){
225 			sc->active = screen;
226 			pxa2x0_lcd_start_dma( sc, screen );
227 		}
228 	}
229 #endif
230 
231 }
232 
233 #if NWSDISPLAY > 0
234 
235 int
lcd_ioctl(void * v,void * vs,u_long cmd,void * data,int flag,struct lwp * l)236 lcd_ioctl(void *v, void *vs, u_long cmd, void *data, int flag, struct lwp *l)
237 {
238 	struct pxa2x0_lcd_softc *sc = v;
239 	struct obio_softc *osc = device_private(device_parent(sc->dev));
240 	uint16_t reg;
241 
242 	switch (cmd) {
243 	case WSDISPLAYIO_SVIDEO:
244 		reg = bus_space_read_2( osc->sc_iot, osc->sc_obioreg_ioh,
245 		    LUBBOCK_MISCWR );
246 		if( *(int *)data == WSDISPLAYIO_VIDEO_ON )
247 			reg |= MISCWR_LCDDISP;
248 		else
249 			reg &= ~MISCWR_LCDDISP;
250 		bus_space_write_2( osc->sc_iot, osc->sc_obioreg_ioh,
251 			LUBBOCK_MISCWR, reg );
252 		break;			/* turn on/off LCD controller */
253 	}
254 
255 	return pxa2x0_lcd_ioctl( v, vs, cmd, data, flag, l );
256 }
257 
258 int
lcd_show_screen(void * v,void * cookie,int waitok,void (* cb)(void *,int,int),void * cbarg)259 lcd_show_screen(void *v, void *cookie, int waitok,
260     void (*cb)(void *, int, int), void *cbarg)
261 {
262 	struct pxa2x0_lcd_softc *sc = v;
263 	struct obio_softc *osc = device_private(device_parent(sc->dev));
264 
265 	pxa2x0_lcd_show_screen(v,cookie,waitok,cb,cbarg);
266 
267 	/* Turn on LCD */
268 	bus_space_write_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR,
269 	    MISCWR_LCDDISP |
270 	    bus_space_read_4( osc->sc_iot, osc->sc_obioreg_ioh, LUBBOCK_MISCWR ) );
271 
272 	return (0);
273 }
274 
275 
276 
277 #else  /* NWSDISPLAY==0 */
278 
279 int
lcdopen(dev_t dev,int oflags,int devtype,struct lwp * l)280 lcdopen( dev_t dev, int oflags, int devtype, struct lwp *l )
281 {
282 	return 0;
283 }
284 
285 int
lcdclose(dev_t dev,int fflag,int devtype,struct lwp * l)286 lcdclose( dev_t dev, int fflag, int devtype, struct lwp *l )
287 {
288 	return 0;
289 }
290 
291 paddr_t
lcdmmap(dev_t dev,off_t offset,int size)292 lcdmmap( dev_t dev, off_t offset, int size )
293 {
294 	struct pxa2x0_lcd_softc *sc =
295 		device_lookup_private(&lcd_cd, minor(dev));
296 	struct pxa2x0_lcd_screen *scr = sc->active;
297 
298 	return bus_dmamem_mmap( &pxa2x0_bus_dma_tag, scr->segs, scr->nsegs,
299 	    offset, 0, BUS_DMA_WAITOK|BUS_DMA_COHERENT );
300 }
301 
302 int
lcdioctl(dev_t dev,u_long cmd,void * data,int fflag,struct lwp * l)303 lcdioctl( dev_t dev, u_long cmd, void *data,
304 	    int fflag, struct lwp *l )
305 {
306 	return EOPNOTSUPP;
307 }
308 
309 #endif /* NWSDISPLAY>0 */
310