xref: /netbsd-src/sys/dev/onewire/onewire_bitbang.c (revision e7a559b6133f8fb2309ab7fd90e39e6db06295e3)
1 /*	$NetBSD: onewire_bitbang.c,v 1.2 2019/11/30 23:04:12 ad Exp $	*/
2 /*	$OpenBSD: onewire_bitbang.c,v 1.1 2006/03/04 16:27:03 grange Exp $	*/
3 
4 /*-
5  * Copyright (c) 2019 The NetBSD Foundation, Inc.
6  * All rights reserved.
7  *
8  * This code is derived from software contributed to The NetBSD Foundation
9  * by Andrew Doran.
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  *
20  * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
21  * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
22  * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
23  * PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
24  * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
25  * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
26  * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
27  * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
28  * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
29  * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30  * POSSIBILITY OF SUCH DAMAGE.
31  */
32 
33 /*
34  * Copyright (c) 2006 Alexander Yurchenko <grange@openbsd.org>
35  *
36  * Permission to use, copy, modify, and distribute this software for any
37  * purpose with or without fee is hereby granted, provided that the above
38  * copyright notice and this permission notice appear in all copies.
39  *
40  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
41  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
42  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
43  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
44  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
45  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
46  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
47  */
48 
49 #include <sys/cdefs.h>
50 __KERNEL_RCSID(0, "$NetBSD: onewire_bitbang.c,v 1.2 2019/11/30 23:04:12 ad Exp $");
51 
52 /*
53  * 1-Wire bus bit-banging routines.
54  */
55 
56 #include <sys/param.h>
57 #include <sys/systm.h>
58 #include <sys/device.h>
59 #include <sys/proc.h>
60 
61 #include <dev/onewire/onewirevar.h>
62 
63  /*
64   * Reset the bus.  Sequence from DS18B20 datasheet:
65   *
66   * 1: Master pulls bus low for a minimum of 480us.
67   * 2: Bus pulled up by resistor.  DS18B20 detects rising edge, waits 15-60us.
68   * 3: DS18B20 pulls bus low for 60-240us.
69   * 4: Bus pulled up by resistor.  Master must wait at least 450us.
70   *
71   *     111111111112222233333444444444
72   *
73   * Vpu |            +-+       +----->
74   *     |           /  |      /
75   * GND +----------+   +-----+
76   */
77 int
onewire_bb_reset(const struct onewire_bbops * ops,void * arg)78 onewire_bb_reset(const struct onewire_bbops *ops, void *arg)
79 {
80 	int s, rv, i;
81 
82 	rv = 0;
83 	s = splhigh();
84 	ops->bb_tx(arg);
85 	ops->bb_set(arg, 0);
86 	delay(500);
87 	ops->bb_set(arg, 1);
88 	ops->bb_rx(arg);
89 	for (i = 0; i < 240 / 5; i++) {
90 		delay(5);
91 		if ((rv = ops->bb_get(arg)) == 0)
92 			break;
93 	}
94 	splx(s);
95 
96 	/*
97 	 * After a bus reset, we must wait for at least 450us before any
98 	 * further device access.  There is no upper bound on this time, so
99 	 * rather than burning CPU, sleep for 1 tick.
100 	 */
101 	KASSERT(2001 > hz);
102 	(void)kpause("owreset", false, 1, NULL);
103 
104 	/*
105 	 * With a push-pull GPIO, bring the bus high to supply
106 	 * parasite-powered devices.  With either PP or open drain,
107 	 * past this point on entry to onewire_bb_write_bit() and
108 	 * onewire_bb_read_bit() we assume that the line is set to
109 	 * output and not being held low.
110 	 */
111 	s = splhigh();
112 	ops->bb_tx(arg);
113 	ops->bb_set(arg, 1);
114 	splx(s);
115 
116 	return rv;
117 }
118 
119 /*
120  * Onewire bit write.
121  *
122  * Method: pull the bus low.  Then let the pull up resistor settle the bus.
123  * ZERO is signalled by the bus being held low for minimum 60us.
124  * ONE is signalled by the hold being much shorter (minimum 1us).
125  *
126  * In any eventuality, pad the entire transaction to the minimum 60us, plus
127  * an additional bit of recovery time before the next transaction
128  */
129 void
onewire_bb_write_bit(const struct onewire_bbops * ops,void * arg,int value)130 onewire_bb_write_bit(const struct onewire_bbops *ops, void *arg, int value)
131 {
132 	int s, d1, d2;
133 
134 	if (value) {
135 		d1 = 2;
136 		d2 = 62;
137 	} else {
138 		d1 = 62;
139 		d2 = 2;
140 	}
141 
142 	s = splhigh();
143 	ops->bb_set(arg, 0);
144 	delay(d1);
145 	ops->bb_set(arg, 1);
146 	splx(s);
147 	/* Timing no longer critical. */
148 	delay(d2);
149 }
150 
151 /*
152  * Onewire bit read.
153  *
154  * Method: pull the bus low for at least 1us.  Then let the pull up resistor
155  * settle the bus.  ZERO is signalled by the bus being pulled low again by
156  * the slave at some point between 15-45us of transaction start.  ONE is
157  * signalled by the bus not being pulled low.
158  *
159  * In any eventuality, pad the entire transaction to the minimum 60us, plus
160  * an additional bit of recovery time before the next transaction.
161  */
162 int
onewire_bb_read_bit(const struct onewire_bbops * ops,void * arg)163 onewire_bb_read_bit(const struct onewire_bbops *ops, void *arg)
164 {
165 	int s, rv, us;
166 
167 	s = splhigh();
168 	ops->bb_set(arg, 0);
169 	delay(2);
170 	ops->bb_set(arg, 1);
171 	ops->bb_rx(arg);
172 	for (us = 62; us >= 60 - 45; us -= 5) {
173 		delay(5);
174 		if ((rv = ops->bb_get(arg)) == 0) {
175 			break;
176 		}
177 	}
178 	splx(s);
179 	/* Timing no longer critical, and no further need to poll. */
180 	if (us > 0) {
181 		delay(us);
182 	}
183 	ops->bb_tx(arg);
184 	ops->bb_set(arg, 1);
185 	return rv;
186 }
187