xref: /netbsd-src/sys/dev/ata/ata_raid_adaptec.c (revision b0f7b0b0b755f5060b5d8c4817f43916bcb64d02)
1 /*	$NetBSD: ata_raid_adaptec.c,v 1.13 2023/08/01 07:58:41 mrg Exp $	*/
2 
3 /*-
4  * Copyright (c) 2000,2001,2002 S�ren Schmidt <sos@FreeBSD.org>
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. Redistributions in binary form must reproduce the above copyright
14  *    notice, this list of conditions and the following disclaimer in the
15  *    documentation and/or other materials provided with the distribution.
16  * 3. The name of the author may not be used to endorse or promote products
17  *    derived from this software without specific prior written permission.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
20  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
21  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
22  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
23  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
24  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
25  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
26  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
27  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
28  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
29  */
30 
31 /*
32  * Support for parsing Adaptec ATA RAID controller configuration blocks.
33  *
34  * Adapted to NetBSD by Allen K. Briggs
35  */
36 
37 #include <sys/cdefs.h>
38 __KERNEL_RCSID(0, "$NetBSD: ata_raid_adaptec.c,v 1.13 2023/08/01 07:58:41 mrg Exp $");
39 
40 #include <sys/param.h>
41 #include <sys/buf.h>
42 #include <sys/bufq.h>
43 #include <sys/conf.h>
44 #include <sys/device.h>
45 #include <sys/disk.h>
46 #include <sys/disklabel.h>
47 #include <sys/fcntl.h>
48 #include <sys/vnode.h>
49 #include <sys/kauth.h>
50 
51 #include <miscfs/specfs/specdev.h>
52 
53 #include <dev/ata/atareg.h>
54 #include <dev/ata/atavar.h>
55 #include <dev/ata/wdvar.h>
56 
57 #include <dev/ata/ata_raidreg.h>
58 #include <dev/ata/ata_raidvar.h>
59 
60 #ifdef ATA_RAID_DEBUG
61 #define	DPRINTF(x)	printf x
62 #else
63 #define	DPRINTF(x)	/* nothing */
64 #endif
65 
66 int
ata_raid_read_config_adaptec(struct wd_softc * sc)67 ata_raid_read_config_adaptec(struct wd_softc *sc)
68 {
69 	struct dk_softc *dksc = &sc->sc_dksc;
70 	struct adaptec_raid_conf *info;
71 	struct atabus_softc *atabus;
72 	struct vnode *vp;
73 	int bmajor, error;
74 	dev_t dev;
75 	uint32_t gen, drive;
76 	struct ataraid_array_info *aai;
77 	struct ataraid_disk_info *adi;
78 
79 	info = kmem_zalloc(sizeof(*info), KM_SLEEP);
80 
81 	bmajor = devsw_name2blk(dksc->sc_xname, NULL, 0);
82 
83 	/* Get a vnode for the raw partition of this disk. */
84 	dev = MAKEDISKDEV(bmajor, device_unit(dksc->sc_dev), RAW_PART);
85 	error = bdevvp(dev, &vp);
86 	if (error)
87 		goto out;
88 
89 	vn_lock(vp, LK_EXCLUSIVE | LK_RETRY);
90 	error = VOP_OPEN(vp, FREAD, NOCRED);
91 	if (error) {
92 		vput(vp);
93 		goto out;
94 	}
95 
96 	error = ata_raid_config_block_rw(vp, ADP_LBA(sc), info,
97 	    sizeof(*info), B_READ);
98 	VOP_CLOSE(vp, FREAD, NOCRED);
99 	vput(vp);
100 	if (error) {
101 		aprint_error_dev(dksc->sc_dev,
102 		    "error %d reading Adaptec config block\n", error);
103 		goto out;
104 	}
105 
106 	info->magic_0 = be32toh(info->magic_0);
107 	info->magic_1 = be32toh(info->magic_1);
108 	info->magic_2 = be32toh(info->magic_2);
109 	info->magic_3 = be32toh(info->magic_3);
110 	info->magic_4 = be32toh(info->magic_4);
111 	/* Check the signature. */
112 	if (info->magic_0 != ADP_MAGIC_0 || info->magic_3 != ADP_MAGIC_3) {
113 		DPRINTF(("%s: Adaptec signature check failed\n",
114 		    dksc->sc_xname));
115 		error = ESRCH;
116 		goto out;
117 	}
118 
119 	/*
120 	 * Lookup or allocate a new array info structure for
121 	 * this array.
122 	 */
123 	aai = ata_raid_get_array_info(ATA_RAID_TYPE_ADAPTEC,
124 		be32toh(info->configs[0].disk_number));
125 
126 	gen = be32toh(info->generation);
127 
128 	if (gen == 0 || gen > aai->aai_generation) {
129 		aai->aai_generation = gen;
130 
131 		aai->aai_status = AAI_S_READY;
132 
133 		switch (info->configs[0].type) {
134 		case ADP_T_RAID0:
135 			aai->aai_level = AAI_L_RAID0;
136 			aai->aai_interleave =
137 			    (be16toh(info->configs[0].stripe_sectors) >> 1);
138 			aai->aai_width = be16toh(info->configs[0].total_disks);
139 			break;
140 
141 		case ADP_T_RAID1:
142 			aai->aai_level = AAI_L_RAID1;
143 			aai->aai_interleave = 0;
144 			aai->aai_width = be16toh(info->configs[0].total_disks)
145 			    / 2;
146 			break;
147 
148 		default:
149 			aprint_error_dev(dksc->sc_dev,
150 			    "unknown Adaptec RAID type 0x%02x\n",
151 			    info->configs[0].type);
152 			error = EINVAL;
153 			goto out;
154 		}
155 
156 		aai->aai_type = ATA_RAID_TYPE_ADAPTEC;
157 		aai->aai_ndisks = be16toh(info->configs[0].total_disks);
158 		aai->aai_capacity = be32toh(info->configs[0].sectors);
159 		aai->aai_heads = 255;
160 		aai->aai_sectors = 63;
161 		aai->aai_cylinders = aai->aai_capacity / (63 * 255);
162 		aai->aai_offset = 0;
163 		aai->aai_reserved = 17;
164 		strlcpy(aai->aai_name, info->configs[0].name,
165 		    sizeof(aai->aai_name));
166 
167 		/* XXX - bogus.  RAID1 shouldn't really have an interleave */
168 		if (aai->aai_interleave == 0)
169 			aai->aai_interleave = aai->aai_capacity;
170 	}
171 
172 	atabus = device_private(device_parent(dksc->sc_dev));
173 	drive = atabus->sc_chan->ch_channel;
174 	if (drive >= aai->aai_ndisks) {
175 		aprint_error_dev(dksc->sc_dev,
176 		    "drive number %d doesn't make sense within %d-disk "
177 		    "array\n", drive, aai->aai_ndisks);
178 		error = EINVAL;
179 		goto out;
180 	}
181 
182 	adi = &aai->aai_disks[drive];
183 	adi->adi_dev = dksc->sc_dev;
184 	adi->adi_status = ADI_S_ONLINE | ADI_S_ASSIGNED;
185 	adi->adi_sectors = aai->aai_capacity;
186 	adi->adi_compsize = be32toh(info->configs[drive+1].sectors);
187 
188 	error = 0;
189 
190  out:
191 	kmem_free(info, sizeof(*info));
192 	return (error);
193 }
194