/freebsd-src/sys/contrib/device-tree/src/arm/marvell/ |
H A D | mmp2-brownstone.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 12 compatible = "mrvl,mmp2-brownstone", "mrvl,mmp2"; 15 bootargs = "console=ttyS2,38400 root=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 34 interrupt-parent = <&intcmux4>; 35 interrupt-controller; 36 #interrupt-cell [all...] |
H A D | pxa910-dkb.dts | 1 // SPDX-License-Identifier: GPL-2.0-only 7 /dts-v1/; 12 compatible = "mrvl,pxa910-dkb", "mrvl,pxa910"; 15 …t=/dev/nfs nfsroot=192.168.1.100:/nfsroot/ ip=192.168.1.101:192.168.1.100::255.255.255.0::eth0:on"; 34 interrupt-parent = <&intc>; 35 interrupt-controller; 36 #interrupt-cells = <1>; 38 marvell,88pm860x-irq-read-clr; 39 marvell,88pm860x-slave-addr = <0x11>; 43 regulator-min-microvolt = <1000000>; [all …]
|
/freebsd-src/sys/contrib/device-tree/src/arm64/rockchip/ |
H A D | rk3588-edgeble-neu6b.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 #include "rk3588-edgeble-neu6a-common.dtsi" 9 compatible = "edgeble,neural-compute-module-6b", "rockchip,rk3588";
|
H A D | rk3588-evb1-v10.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/input/input.h> 11 #include <dt-bindings/pinctrl/rockchip.h> 12 #include <dt-bindings/usb/pd.h> 17 compatible = "rockchip,rk3588-evb1-v1 [all...] |
H A D | rk3588-quartzpro64.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 8 #include <dt-bindings/gpio/gpio.h> 9 #include <dt-bindings/input/input.h> 10 #include <dt-bindings/leds/common.h> 11 #include <dt-bindings/pinctrl/rockchip.h> 12 #include <dt-bindings/usb/pd.h> 26 stdout-pat [all...] |
H A D | rk3588s-coolpi-4b.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 5 * https://cool-pi.com/topic/130/coolpi-4b-product-spec-introduction 9 /dts-v1/; 11 #include <dt-binding [all...] |
H A D | rk3588-coolpi-cm5.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 /dts-v1/; 9 #include <dt-bindings/gpio/gpio.h> 10 #include <dt-bindings/pwm/pwm.h> 11 #include <dt-bindings/pinctrl/rockchip.h> 15 compatible = "coolpi,pi-cm5", "rockchip,rk3588"; 24 analog-sound { 25 compatible = "audio-grap [all...] |
H A D | rk3588-turing-rk1.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 7 * Based on RK3588-EVB1 devicetree 11 /dts-v1/; 12 #include <dt-bindings/gpio/gpio.h> 13 #include <dt-bindings/pinctrl/rockchip.h> 24 fan: pwm-fan { 25 compatible = "pwm-fa [all...] |
H A D | rk3588-jaguar.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include <dt-bindings/gpio/gpio.h> 8 #include <dt-bindings/input/input.h> 9 #include <dt-bindings/leds/common.h> 10 #include <dt-bindings/pinctrl/rockchip.h> 11 #include <dt-bindings/usb/pd.h> 15 model = "Theobroma Systems RK3588-SB [all...] |
H A D | rk3399-evb.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 7 #include <dt-bindings/pwm/pwm.h> 8 #include "rk3399-base.dtsi" 12 compatible = "rockchip,rk3399-evb", "rockchip,rk3399"; 20 compatible = "pwm-backlight"; 21 brightness-levels = < 54 default-brightnes [all...] |
H A D | rk3588s-rock-5a.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/leds/common.h> 7 #include <dt-bindings/pinctrl/rockchip.h> 12 compatible = "radxa,rock-5a", "rockchip,rk3588s"; 20 analog-sound { 21 compatible = "audio-grap [all...] |
H A D | rk3588s-orangepi-5.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/leds/common.h> 7 #include <dt-bindings/input/input.h> 8 #include <dt-bindings/pinctrl/rockchip.h> 9 #include <dt-bindings/usb/pd.h> 14 compatible = "xunlong,orangepi- [all...] |
H A D | rk3588s-indiedroid-nova.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 5 #include <dt-bindings/gpio/gpio.h> 6 #include <dt-bindings/input/linux-event-codes.h> 7 #include <dt-bindings/pinctrl/rockchip.h> 8 #include <dt-binding [all...] |
/freebsd-src/sys/contrib/device-tree/Bindings/regulator/ |
H A D | pfuze100.txt | 4 - compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000", "fsl,pfuze3001" 5 - reg: I2C slave address 8 - fsl,pfuze-support-disable-sw: Boolean, if present disable all unused switch 10 regulators (e.g. DDR ref, DDR supply) has set the "regulator-always-on" 11 property. If not present, the switched regulators are always on and can't be 13 old dtb's which rely on the fact that the switched regulators are always on 14 and don't mark them explicit as "regulator-always-on". 15 - fsl,pmic-stby-poweroff: if present, configure the PMIC to shutdown all 18 management IC (PMIC) on PMIC_STBY_REQ signal. 22 - regulators: This is the list of child nodes that specify the regulator [all …]
|
H A D | pv88060.txt | 1 * Powerventure Semiconductor PV88060 Voltage Regulator 4 - compatible: "pvs,pv88060". 5 - reg: I2C slave address, usually 0x49. 6 - interrupts: the interrupt outputs of the controller 7 - regulators: A node that houses a sub-node for each regulator within the 8 device. Each sub-node is identified using the node's name, with valid 9 values listed below. The content of each sub-node is defined by the 10 standard binding for regulators; see regulator.txt. 15 - Any optional property defined in regulator.txt 22 interrupt-parent = <&gpio>; [all …]
|
H A D | tps65090.txt | 4 - compatible: "ti,tps65090" 5 - reg: I2C slave address 6 - interrupts: the interrupt outputs of the controller 7 - regulators: A node that houses a sub-node for each regulator within the 8 device. Each sub-node is identified using the node's name, with valid 9 values listed below. The content of each sub-node is defined by the 10 standard binding for regulators; see regulator.txt. 11 dcdc[1-3], fet[1-7] and ldo[1-2] respectively. 12 - vsys[1-3]-supply: The input supply for DCDC[1-3] respectively. 13 - infet[1-7]-supply: The input supply for FET[1-7] respectively. [all …]
|
H A D | nxp,pf8x00-regulator.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 3 --- 4 $id: http://devicetree.org/schemas/regulator/nxp,pf8x00-regulator.yaml# 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Jagan Teki <jagan@amarulasolutions.com> 11 - Troy Kisky <troy.kisky@boundarydevices.com> 16 linear and one vsnvs regulators. It has built-in one time programmable 22 - nxp,pf8100 23 - nxp,pf8121a 24 - nxp,pf8200 [all …]
|
/freebsd-src/sys/contrib/device-tree/src/arm/nxp/imx/ |
H A D | imx53-qsrb.dts | 1 // SPDX-License-Identifier: GPL-2.0+ 6 /dts-v1/; 8 #include "imx53-qsb-common.dtsi" 11 model = "Freescale i.MX53 Quick Start-R Board"; 12 compatible = "fsl,imx53-qsrb", "fsl,imx53"; 16 imx53-qsrb { 28 pinctrl-names = "default"; 29 pinctrl-0 = <&pinctrl_pmic>; 31 interrupt-parent = <&gpio5>; 35 regulator-name = "SW1"; [all …]
|
H A D | e60k02.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 4 * based on works 11 * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and 14 #include <dt-bindings/input/input.h> 23 stdout-path = &uart1; 26 gpio_keys: gpio-keys { 27 compatible = "gpio-keys"; 29 key-powe [all...] |
H A D | e70k02.dtsi | 1 // SPDX-License-Identifier: GPL-2.0 4 * based on works 11 * found in ebook-readers like the Kobo Clara HD (with i.MX6SLL) and 14 #include <dt-bindings/input/input.h> 23 stdout-path = &uart1; 26 gpio_keys: gpio-keys { 27 compatible = "gpio-keys"; 29 key-powe [all...] |
/freebsd-src/sys/contrib/device-tree/src/arm/rockchip/ |
H A D | rk3288-evb-rk808.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 3 /dts-v1/; 4 #include "rk3288-evb.dtsi" 8 compatible = "rockchip,rk3288-evb-rk808", "rockchip,rk3288"; 12 clock-frequency = <400000>; 17 interrupt-parent = <&gpio0>; 19 pinctrl-names = "default"; 20 pinctrl-0 = <&pmic_int &global_pwroff>; 21 rockchip,system-power-controller; 22 wakeup-source; [all …]
|
H A D | rk3288-vyasa.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT) 6 /dts-v1/; 10 model = "Amarula Vyasa-RK3288"; 11 compatible = "amarula,vyasa-rk3288", "rockchip,rk3288"; 14 stdout-path = &uart2; 22 dc12_vbat: dc12-vbat { 23 compatible = "regulator-fixed"; 24 regulator-name = "dc12_vbat"; 25 regulator-min-microvolt = <12000000>; 26 regulator-max-microvolt = <12000000>; [all …]
|
/freebsd-src/sys/contrib/device-tree/Bindings/mfd/ |
H A D | rockchip,rk806.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause 3 --- 5 $schema: http://devicetree.org/meta-schemas/core.yaml# 10 - Sebastian Reichel <sebastian.reichel@collabora.com> 19 - rockchip,rk806 27 gpio-controller: true 29 '#gpio-cells': 32 system-power-controller: true 34 vcc1-supply: 36 The input supply for dcdc-reg1. [all …]
|
H A D | rk808.txt | 11 - compatible: "rockchip,rk805" 12 - compatible: "rockchip,rk808" 13 - compatible: "rockchip,rk809" 14 - compatible: "rockchip,rk817" 15 - compatible: "rockchip,rk818" 16 - reg: I2C slave address 17 - interrupts: the interrupt outputs of the controller. 18 - #clock-cells: from common clock binding; shall be set to 1 (multiple clock 19 outputs). See <dt-bindings/clock/rockchip,rk808.h> for clock IDs. 22 - clock-output-names: From common clock binding to override the [all …]
|
/freebsd-src/sys/contrib/device-tree/src/arm/nvidia/ |
H A D | tegra114-tn7.dts | 1 // SPDX-License-Identifier: GPL-2.0 2 /dts-v1/; 4 #include <dt-bindings/input/input.h> 15 linux,initrd-start = <0x82000000>; 16 linux,initrd-end = <0x82800000>; 24 trusted-foundations { 25 compatible = "tlm,trusted-foundations"; 26 tlm,version-major = <2>; 27 tlm,version-minor = <8>; 40 avdd-dsi-csi-supply = <&vdd_1v2_ap>; [all …]
|