| /freebsd-src/sys/contrib/device-tree/Bindings/power/supply/ |
| H A D | bq24190.txt | 1 TI BQ24190 Li-Ion Battery Charger
4 - compatible: contains one of the following:
9 - reg: integer, I2C address of the charger.
10 - interrupts[-extended]: configuration for charger INT pin.
13 - monitored-battery: phandle of battery characteristics devicetree node
15 + precharge-current-microamp: maximum charge current during precharge
17 + charge-term-current-microamp: a charge cycle terminates when the
18 battery voltage is above recharge threshold, and the current is below
21 - ti,system-minimum-microvolt: when power is connected and the battery is below
25 - usb-otg-vbus:
[all …]
|
| H A D | battery.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sebastian Reichel <sre@kernel.org>
14 In smart batteries, these are typically stored in non-volatile memory
16 no appropriate non-volatile memory, or it is unprogrammed/incorrect.
27 Batteries must be referenced by chargers and/or fuel-gauges using a phandle.
28 The phandle's property should be named "monitored-battery".
32 const: simple-battery
34 device-chemistry:
[all …]
|
| H A D | bq24190.yaml | 1 # SPDX-License-Identifier: GPL-2.0
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
8 title: TI BQ2419x Li-Ion Battery Charger
11 - Sebastian Reichel <sre@kernel.org>
14 - $ref: power-supply.yaml#
19 - ti,bq24190
20 - ti,bq24192
21 - ti,bq24192i
22 - ti,bq24196
[all …]
|
| H A D | sc2731_charger.txt | 4 - compatible: Should be "sprd,sc2731-charger".
5 - reg: Address offset of charger register.
6 - phys: Contains a phandle to the USB phy.
9 - monitored-battery: phandle of battery characteristics devicetree node.
11 - charge-term-current-microamp: current for charge termination phase.
12 - constant-charge-voltage-max-microvolt: maximum constant input voltage.
18 compatible = "simple-battery";
19 charge-term-current-microamp = <120000>;
20 constant-charge-voltage-max-microvolt = <4350000>;
27 spi-max-frequency = <26000000>;
[all …]
|
| H A D | sc2731-charger.yaml | 1 # SPDX-License-Identifier: GPL-2.0
3 ---
4 $id: http://devicetree.org/schemas/power/supply/sc2731-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Sebastian Reichel <sre@kernel.org>
13 - $ref: power-supply.yaml#
17 const: sprd,sc2731-charger
26 monitored-battery:
29 - charge-term-current-microamp: current for charge termination phase.
30 - constant-charge-voltage-max-microvolt: maximum constant input voltage.
[all …]
|
| H A D | richtek,rt5033-charger.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
4 $id: http://devicetree.org/schemas/power/supply/richtek,rt5033-charger.yaml#
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jakob Hauser <jahau@rocketmail.com>
14 under sub-node named "charger" using the following format.
18 const: richtek,rt5033-charger
20 monitored-battery:
26 precharge-current-microamp:
27 Current of pre-charge mode. The pre-charge current levels are 350 mA
[all …]
|
| H A D | rohm,bd99954.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Matti Vaittinen <mazziesaccount@gmail.com>
11 - Markus Laine <markus.laine@fi.rohmeurope.com>
12 - Mikko Mutanen <mikko.mutanen@fi.rohmeurope.com>
15 The ROHM BD99954 is a Battery Management LSI for 1-4 cell Lithium-Ion
16 secondary battery intended to be used in space-constraint equipment such
18 provides a Dual-source Battery Charger, two port BC1.2 detection and a
21 $ref: power-supply.yaml#
[all …]
|
| H A D | bq25980.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Andrew Davis <afd@ti.com>
15 for use in high-power density portable electronics. These inductorless
20 - $ref: power-supply.yaml#
25 - ti,bq25980
26 - ti,bq25975
27 - ti,bq25960
32 ti,watchdog-timeout-ms:
[all …]
|
| H A D | bq256xx.yaml | 1 # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
4 ---
6 $schema: http://devicetree.org/meta-schemas/core.yaml#
11 - Andrew Davis <afd@ti.com>
14 The bq256xx devices are a family of highly-integrated battery charge
15 management and system power management ICs for single cell Li-ion and Li-
19 - https://www.ti.com/lit/ds/symlink/bq25600.pdf
20 - https://www.ti.com/lit/ds/symlink/bq25601.pdf
21 - https://www.ti.com/lit/ds/symlink/bq25600d.pdf
22 - https://www.ti.com/lit/ds/symlink/bq25601d.pdf
[all …]
|
| /freebsd-src/sys/contrib/device-tree/src/arm64/rockchip/ |
| H A D | rk3566-anbernic-rg353vs.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anberni
[all...] |
| H A D | rk3566-anbernic-rg353ps.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anberni
[all...] |
| H A D | rk3566-anbernic-rg353v.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anberni
[all...] |
| H A D | rk3326-odroid-go2.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include "rk3326-odroid-go.dtsi"
12 model = "ODROID-GO Advance";
13 compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
15 analog_sticks: adc-joystick {
16 compatible = "adc-joystick";
17 io-channels = <&saradc 1>,
19 poll-interval = <60>;
20 #address-cells = <1>;
[all …]
|
| H A D | rk3566-anbernic-rg353p.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anberni
[all...] |
| H A D | rk3566-anbernic-rg503.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/pinctrl/rockchip.h>
8 #include "rk3566-anberni
[all...] |
| H A D | rk3326-odroid-go2-v11.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include "rk3326-odroid-go.dtsi"
12 model = "ODROID-GO Advance Black Edition";
13 compatible = "hardkernel,rk3326-odroid-go2-v11", "rockchip,rk3326";
19 analog_sticks: adc-joystick {
20 compatible = "adc-joystick";
21 io-channels = <&saradc 1>,
23 poll-interval = <60>;
24 #address-cells = <1>;
[all …]
|
| H A D | rk3326-odroid-go3.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
9 #include "rk3326-odroid-go.dtsi"
12 model = "ODROID-GO Super";
13 compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
15 joystick_mux_controller: mux-controller {
16 compatible = "gpio-mux";
18 #mux-control-cells = <0>;
20 mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
24 joystick_mux: adc-mux {
[all …]
|
| H A D | rk3566-powkiddy-x55.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-binding
[all...] |
| H A D | rk3566-powkiddy-rk2023.dtsi | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
3 /dts-v1/;
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/linux-event-codes.h>
7 #include <dt-bindings/leds/common.h>
8 #include <dt-binding
[all...] |
| /freebsd-src/sys/contrib/device-tree/Bindings/mfd/ |
| H A D | richtek,rt5033.yaml | 1 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
3 ---
5 $schema: http://devicetree.org/meta-schemas/core.yaml#
10 - Jakob Hauser <jahau@rocketmail.com>
14 flash LED current source, LDO and synchronous Buck converter for portable
30 The regulators of RT5033 have to be instantiated under a sub-node named
44 $ref: /schemas/power/supply/richtek,rt5033-charger.yaml#
47 - compatible
48 - reg
49 - interrupts
[all …]
|
| H A D | rockchip,rk817.yaml | 1 # SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
3 ---
5 $schema: http://devicetree.org/meta-schema
[all...] |
| /freebsd-src/sys/contrib/device-tree/src/arm64/sprd/ |
| H A D | sp9860g-1h10.dts | 1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
8 /dts-v1/;
16 compatible = "sprd,sp9860g-1h10", "sprd,sc9860";
33 stdout-path = "serial1:115200n8";
36 gpio-keys {
37 compatible = "gpio-keys";
39 key-volumedown {
43 debounce-interva
[all...] |
| /freebsd-src/sys/contrib/device-tree/src/arm64/qcom/ |
| H A D | msm8916-samsung-serranove.dts | 1 // SPDX-License-Identifier: GPL-2.0-only
6 /dts-v1/;
8 #include "msm8916-pm8916.dtsi"
9 #include "msm8916-modem-qdsp6.dtsi"
11 #include <dt-bindings/gpio/gpio.h>
12 #include <dt-bindings/input/input.h>
13 #include <dt-bindings/interrupt-controller/irq.h>
24 * arch/arm/boot/dts/qcom-msm8916-samsung-serranove.dts
30 chassis-type = "handset";
39 stdout-path = "serial0";
[all …]
|
| /freebsd-src/sys/contrib/device-tree/src/arm/samsung/ |
| H A D | exynos4412-p4note.dtsi | 1 // SPDX-License-Identifier: GPL-2.0
4 * Based on exynos4412-midas.dtsi.
10 /dts-v1/;
12 #include "exynos4412-ppmu-common.dtsi"
14 #include <dt-bindings/clock/maxim,max77686.h>
15 #include <dt-bindings/gpio/gpio.h>
16 #include <dt-binding
[all...] |