#ifndef lint static char sccsid[] = "@(#)ventel.c 1.4 (Berkeley) 06/25/83"; #endif #if VENTEL /* * Routines for calling up on a Ventel Modem * The Ventel is expected to be strapped for "no echo". */ #include "tip.h" #define MAXRETRY 5 static int sigALRM(); static int timeout = 0; static jmp_buf timeoutbuf; ven_dialer(num, acu) register char *num; char *acu; { register char *cp; register int connected = 0; #ifdef ACULOG char line[80]; #endif /* * Get in synch with a couple of carriage returns */ if (!vensync(FD)) { printf("can't synchronize with ventel\n"); #ifdef ACULOG logent(value(HOST), num, "ventel", "can't synch up"); #endif return (0); } if (boolean(value(VERBOSE))) printf("\ndialing..."); fflush(stdout); ioctl(FD, TIOCHPCL, 0); echo("#k$\r$\n$D$I$A$L$:$ "); for (cp = num; *cp; cp++) { sleep(1); write(FD, cp, 1); } echo("\r$\n"); if (gobble('\n')) connected = gobble('!'); ioctl(FD, TIOCFLUSH); #ifdef ACULOG if (timeout) { sprintf(line, "%d second dial timeout", number(value(DIALTIMEOUT))); logent(value(HOST), num, "ventel", line); } #endif if (timeout) ven_disconnect(); /* insurance */ return (connected); } ven_disconnect() { close(FD); } ven_abort() { write(FD, "\03", 1); close(FD); } static int echo(s) register char *s; { char c; while (c = *s++) switch (c) { case '$': read(FD, &c, 1); s++; break; case '#': c = *s++; write(FD, &c, 1); break; default: write(FD, &c, 1); read(FD, &c, 1); } } static int sigALRM() { printf("\07timeout waiting for reply\n"); timeout = 1; longjmp(timeoutbuf, 1); } static int gobble(match) register char match; { char c; int (*f)(); signal(SIGALRM, sigALRM); timeout = 0; do { if (setjmp(timeoutbuf)) { signal(SIGALRM, f); return (0); } alarm(number(value(DIALTIMEOUT))); read(FD, &c, 1); alarm(0); c &= 0177; #ifdef notdef if (boolean(value(VERBOSE))) putchar(c); #endif } while (c != '\n' && c != match); signal(SIGALRM, SIG_DFL); return (c == match); } #define min(a,b) ((a)>(b)?(b):(a)) /* * This convoluted piece of code attempts to get * the ventel in sync. If you don't have FIONREAD * there are gory ways to simulate this. */ static int vensync(fd) { int already = 0, nread; char buf[60]; /* * Toggle DTR to force anyone off that might have left * the modem connected, and insure a consistent state * to start from. * * If you don't have the ioctl calls to diddle directly * with DTR, you can always try setting the baud rate to 0. */ ioctl(FD, TIOCCDTR, 0); sleep(2); ioctl(FD, TIOCSDTR, 0); while (already < MAXRETRY) { /* * After reseting the modem, send it two \r's to * autobaud on. Make sure to delay between them * so the modem can frame the incoming characters. */ write(fd, "\r", 1); sleep(1); write(fd, "\r", 1); sleep(3); if (ioctl(fd, FIONREAD, (caddr_t)&nread) < 0) { perror("tip: ioctl"); continue; } while (nread > 0) { read(fd, buf, min(nread, 60)); if ((buf[nread - 1] & 0177) == '$') return (1); nread -= min(nread, 60); } sleep(1); already++; } return (0); } #endif