Lines Matching full:is
17 The bottom line of the screen is used to enter
22 If no other information is being displayed,
60 first starts, it is in command mode.
66 character is used to resolve the text input into the file,
70 command mode, the cursor is always positioned on the last column of
74 text insert mode, the cursor is positioned on the first column of
78 the type of movement is defined by the distance to the new cursor position.
79 If the new position is close,
80 the screen is scrolled to the new location.
81 If the new position is far away,
82 the screen is repainted so that the new position is on the screen.
83 If the screen is scrolled,
84 it is moved a minimal amount,
86 If the screen is repainted,
88 unless the cursor is sufficiently close to the beginning or end of the file
92 option is set, the screen may be scrolled or repainted in a horizontal
133 specifies if the cursor is set to a specific location in the line,
134 or if it is moved to the
136 The latter means that the cursor is moved to the cursor position that
138 If the current line is shorter than the cursor position
140 would select, the cursor is positioned on the last character in the line.
141 (If the line is empty, the cursor is positioned on the first column
158 command described below notes where the cursor ends up after it is
160 This position is described in terms of characters on the line, i.e.
164 This is to avoid needing to continually refer to on what part of the
176 command described in the next section that is considered an
177 absolute movement is so noted.
182 command is considered an absolute movement.
204 In the latter case, the region affected by the command is from the
244 may be included and is
253 command is two words of text.
255 if the optional count prefix is specified for both the
258 the effect is multiplicative and is considered part of the motion argument.
265 command is four words of text.
271 The count argument is always optional and defaults to 1 unless otherwise
283 Generally, in languages where it is applicable,
330 whose first character is an open brace
368 In each entry below, the tag line is a usage synopsis for the command
380 The search is literal, i.e. no characters in the word have any special
382 It is an error if no matching pattern is found between the starting position
387 command is an absolute movement.
392 commands, in which case any text copied into a buffer is
396 Set to the line where the word is found.
419 (In the case of split screens, this size is corrected to the
421 It is an error if the movement is past the beginning of the file.
444 If this is the first
450 (In the case of split screens, the default scrolling distance is
452 It is an error if the movement is past the end of the file.
466 It is an error if the movement is past the end of the file.
470 in which case it is set to the first line on the screen.
473 in which case it is set to the most attractive cursor position.
490 (In the case of split screens, this size is corrected to the
492 It is an error if the movement is past the end of the file.
510 and if the edit session is read-only.
525 It is an error if the cursor is on the first character in the line.
534 in which case any text copied into a buffer is character oriented.
557 It is an error if the movement is past the end of the file.
566 commands, in which case any text copied into a buffer is
597 It is an error if the movement is past the end of the file.
605 commands, in which case any text copied into a buffer is
623 It is an error if the movement is past the beginning of the file.
631 commands, in which case any text copied into a buffer is
647 command is an absolute movement.
669 If this is the first
675 (In the case of split screens, the default scrolling distance is
677 It is an error if the movement is past the beginning of the file.
702 lines, leaving the current line and column as is, if possible.
703 It is an error if the movement is past the beginning of the file.
707 in which case it is set to the last line of text displayed
711 in which case it is the most attractive cursor position.
721 option is set, the file is written before the editor session is
723 If this write fails, the editor session is not suspended.
741 command is being entered (e.g.
747 the command is executed.
752 the command is cancelled.
753 Otherwise, it is an error.
758 command is being executed, the current line is set as described for
764 command is being executed, the current column is set as described for
780 If a matching tag is found, the current file is discarded and the
781 file containing the tag reference is edited.
787 command is an absolute movement.
807 option is set, the file is written out.
828 It is an error if the cursor is on the last character in the line.
836 commands, in which case any text copied into a buffer is
839 of other commands when the cursor is on the last character in the
866 After the motion is entered,
878 character is expanded with the command text of the previous
899 it is an error to use an unescaped
908 the command is redisplayed at the bottom of the screen.
919 command is permitted in an empty file.
938 If the trailing character is a
942 the number is incremented by
944 If the trailing character is a
946 the number is decremented by
957 digit is found as part of the number.
958 Otherwise, the number is interpreted as a decimal number, and may
967 The format of the number (e.g. leading 0's, signs) is retained unless
975 It is an error to use this command when the cursor is not positioned at
995 It is not an error to use the
997 command when the cursor is on the last character in the line or
998 when the line is empty.
1004 commands, in which case any text copied into a buffer is
1005 character oriented, unless the cursor is at, or before the first
1006 nonblank character in the line, in which case it is line oriented.
1007 It is not an error to use the
1009 command as a motion component when the cursor is on the last character
1010 in the line, although it is an error when the line is empty.
1027 or which is the closest one to the right of the cursor on the line.
1028 It is an error to execute the
1039 command is an absolute movement.
1044 commands, in which case any text copied into a buffer is
1045 character oriented, unless the starting point of the region is at
1047 point is at or after the last nonblank character on its line, in
1048 which case it is line oriented.
1100 If the command is the
1102 command, only the line value is restored,
1103 and the cursor is placed on the first nonblank character of that line.
1104 If the command is the
1108 It is an error if the context no longer exists because of
1123 command, any text copied into a buffer is line oriented.
1127 any text copied into a buffer is character oriented,
1129 in which case it is line oriented.
1157 command is an absolute movement.
1163 in which case any text copied into a buffer is character oriented,
1166 in which case it is line oriented.
1167 If it is line oriented,
1168 the starting point of the region is adjusted to be the end of the line
1188 command is an absolute movement.
1193 commands, in which case any text copied into a buffer is
1194 character oriented, unless the starting point of the region is the
1195 first character in the line, in which case it is line oriented.
1196 In the latter case, if the stopping point of the region is also
1197 the first character in the line, it is adjusted to be the end of the
1223 It is an error if a
1235 commands, in which case any text copied into a buffer is
1261 It is an error if the movement is past the beginning of the file.
1267 commands, in which case any text copied into a buffer is
1297 command is executed immediately after the
1299 command, the change log is rolled forward or backward, depending on
1332 occurrence of the string, which is interpreted as a Basic Regular
1342 commands, in which case any text copied into a buffer is
1344 the first column of a line, in which case it is line oriented.
1354 option is set.)
1356 If an offset from the matched line is specified (i.e. a trailing
1360 character is followed by a signed offset), the buffer will always
1403 It is also permissible to append a
1428 It is not an error to use the
1430 command when the cursor is on the first character in the line,
1437 in which case it is an error if the cursor is on the first character
1439 and any text copied into a buffer is character oriented.
1459 The command is terminated by a
1467 The command is then executed.
1496 command finishes, and the user is prompted to resume visual mode,
1497 it is also possible to enter another
1504 The current line is set as described for the
1508 The current column is set as described for the
1521 The last character find is one of the
1528 It is an error if a
1540 commands, in which case any text copied into a buffer is
1601 If the buffer is line oriented,
1604 If the buffer is character oriented,
1608 If the buffer name is
1613 It is an error to specify
1621 and it is possible to create infinite loops in this manner.
1627 The current line is set as described for the command(s).
1629 The current column is set as described for the command(s).
1638 is specified, the text is repeatedly input
1640 more times after input mode is exited.
1663 following algorithm: if the current position is at the beginning of a
1675 commands, in which case any text copied into a buffer is
1714 It is not an error to execute the
1732 following algorithm: if the current position is the end of a
1745 commands, in which case any text copied into a buffer is
1766 commands, in which case any text copied into a buffer is
1786 command is an absolute movement.
1791 commands, in which case any text copied into a buffer is
1811 command is an absolute movement.
1816 commands, in which case any text copied into a buffer is
1835 is specified, the text input is repeatedly input
1871 It is not an error to join lines past the end of the file,
1890 command is an absolute movement.
1895 commands, in which case any text copied into a buffer is
1915 command is an absolute movement.
1920 commands, in which case any text copied into a buffer is
1943 is specified, the text input is repeatedly input
1971 Text from the buffer (the unnamed buffer by default) is inserted
1972 before the current column or, if the buffer is line oriented,
1977 if the buffer is line oriented, otherwise unchanged.
1980 if the buffer is line oriented, otherwise the last character
2005 is specified, the text input is repeatedly input
2009 If the end of the current line is reached, no more characters are
2062 commands, in which case any text copied into a buffer is
2092 following algorithm: if the current position is within a bigword or the
2103 commands, in which case any text copied into a buffer is
2118 If the number of characters to be deleted is greater than or equal to
2128 or the first character if count is greater than the number of
2151 The file is only written if it has been modified since the last
2184 command is an absolute movement.
2189 commands, in which case any text copied into a buffer is
2190 character oriented, unless the starting position is column 0,
2191 in which case it is line oriented.
2193 It is an error if the movement is past the beginning of the file.
2196 Set to the previous line that is
2216 command is an absolute movement.
2221 commands, in which case any text copied into a buffer is
2222 character oriented, unless the starting position is column 0,
2223 in which case it is line oriented.
2225 It is an error if the movement is past the end of the file.
2228 Set to the line that is
2248 commands, in which case any text copied into a buffer is
2267 commands, in which case any text copied into a buffer is
2270 It is not an error to execute the
2272 command when the cursor is on the first character in the line.
2287 is specified, the text input is repeatedly input
2312 following algorithm: if the current position is at the beginning of a word,
2324 commands, in which case any text copied into a buffer is
2340 If only part of a single line is affected, then the last character
2341 being changed is marked with a
2343 Otherwise, the region of text is deleted, and input mode is entered.
2382 algorithm: if the current position is the end of a word,
2392 commands, in which case any text copied into a buffer is
2413 commands, in which case any text copied into a buffer is
2428 is specified, the text input is repeatedly input
2451 The exact position is referred to by
2453 The line is referred to by
2474 is specified, the text input is repeatedly input
2502 Text from the buffer (the unnamed buffer by default) is appended
2503 after the current column or, if the buffer is line oriented,
2507 Set to the first line appended, if the buffer is line oriented,
2530 the command is cancelled.
2533 Unchanged unless the replacement character is a
2535 in which case it is set to the current line plus
2539 unless the replacement character is a
2541 in which case the cursor is in column 1 of the last line inserted.
2578 commands, in which case any text copied into a buffer is
2595 command alternates between these two states, and is its own inverse.
2623 following algorithm: if the current position is at the
2633 commands, in which case any text copied into a buffer is
2648 The deletion is at the current character position.
2649 If the number of characters to be deleted is greater than or equal to
2656 Unchanged unless the last character in the line is deleted and the cursor
2657 is not already on the first character in the line, in which case it is
2674 in which case it is set to the line where the region starts.
2677 in which case it is set to the character were the region starts.
2725 is specified, place the line that is at the top of the screen
2747 in which case it is set to the line before the first line on the
2763 command is an absolute movement.
2768 commands, in which case any text copied into a buffer is
2769 character oriented, unless the starting character is the first
2770 character on its line, in which case it is line oriented.
2791 commands, in which case any text copied into a buffer is
2793 It is an error to use the
2803 If the column length of the current line is less than
2805 the cursor is moved to the last character in the line.
2817 command is an absolute movement.
2822 commands, in which case any text copied into a buffer is
2823 character oriented, unless the starting character is at or
2825 in which case it is line oriented.
2841 This is the historic semantic for the
2843 command and it is only in effect if the
2845 option is not set.
2859 if the cursor is on the last character of a line, and there are
2862 It is not an error to specify a count larger than the number of
2886 option is set.
2914 character is used to interrupt while entering an
2916 command, the command is aborted, the cursor returns to its previous
2923 character is used to interrupt any
2976 If the first character of the input is a
2978 the previous input is replayed, as if just entered.
2983 after the previous (1-based) column which is a multiple of the
2994 option is set and the user is entering the first character in the line,
2999 character is entered.
3004 In addition, the autoindent level is reset to 0.
3009 The autoindent level is not altered.
3017 after the next (1-based) column which is a multiple of the
3054 edit option is set, behave as described for that option.
3067 The definition of word is dependent on the
3075 The value is delimited by any non-hexadecimal character or the input
3083 character is used to interrupt inserting text into the file,
3084 it is as if the
3086 character was used; all text input up to the interruption is