Lines Matching +full:fine +full:- +full:tuning
17 * 3. Neither the name of the author nor the names of any co-contributors
39 * Serial bus format for Philips SA2400 Single-chip Transceiver.
46 * Registers for Philips SA2400 Single-chip Transceiver.
110 #define SA2400_OPMODE_ADC (1<<19) /* 1: in Rx mode, RSSI-ADC always on
111 * 0: RSSI-ADC only on during AGC
113 #define SA2400_OPMODE_FTERR (1<<18) /* read-only filter tuner error:
116 /* Rx & Tx filter tuning, write tuning value (test mode only) or
158 #define SA2400_AGC_TARGETSIGN (1<<23) /* fine-tune AGC target:
159 * -7dB to 7dB, sign bit ... */
160 #define SA2400_AGC_TARGET_MASK 0x700000 /* ... plus 0dB - 7dB */
166 * read: output of RSSI/Tx-peak detector's ADC in 5-bit Gray code.
186 #define SA2400_MANRX_AHSN (1<<23) /* 1: AGC w/ high S/N---switch LNA at
192 * (_RXOSQSIGN ? -1 : 1) * (1 + _RXOSQ_MASK) * 8 millivolts,
197 #define SA2400_MANRX_RXOSQON (1<<22) /* Rx Q-channel correction. */
201 #define SA2400_MANRX_RXOSION (1<<17) /* Rx I-channel correction. */
211 * read: in other modes, read AGC-controlled cornerpoint
216 * read: in other modes, read AGC-controlled gain
233 #define SA2400_TX_RAMP_MASK 0x300 /* Ramp-up delay,
238 * datasheet says, "ramp-up
250 #define SA2400_VCO_VCERR (1<<4) /* VCO calibration error flag---no