Lines Matching +refs:texi +refs:docstring +refs:magic +refs:texi +refs:for
186 (all): Add '+' to the command line for recursive make. Support
224 * Makefile.tpl (POSTSTAGE1_HOST_EXPORTS): Fix command for GDC.
229 * configure.ac: Add support for bootstrapping D front-end.
239 correctly for Darwin.
258 (Write After Approval): Add an entry for myself.
285 * MAINTAINERS: Add myself for write after approval.
321 * Makefile.def: Add a jit check target for the jit
338 * MAINTAINERS: Add myself for write after approval.
347 * MAINTAINERS: Add myself for write after approval.
374 * configure.ac: Adjust cases for which it is necessary to
379 * MAINTAINERS: Add myself for write after approval and DCO.
391 * MAINTAINERS: Add myself for write after approval.
399 * MAINTAINERS: Add myself for write after approval and DCO
403 * .gitignore: Add entry for cscope.out.
446 * configure.ac: Add gnulib to configdirs for sim.
464 * MAINTAINERS: Remove entries for removed
542 * MAINTAINERS: Update entries for a few ex-ImgTec employees
562 for profiledbootstrap.
625 for Darwin20.
638 * configure.ac: Don't disable D for *-*-darwin*.
699 * configure.ac: Run AX_CXX_COMPILE_STDCXX also for ${build} compiler,
735 for Mingw.
756 * configure.ac (noconfigdirs): Exclude gdb & gprof for pdp11.
764 for CYGWIN.
782 * configure.ac: Build libgomp by default for amdgcn.
799 * doc/extend.texi (attribute alias): Mention type requirement.
805 * doc/md.texi (PowerPC and IBM RS6000): Improve documentation.
820 entry for gcc/config/avr/t-multilib.
852 * configure.ac: Factor out common cases for compare_exclusions.
872 * configure.ac: Use https for gcc.gnu.org.
896 * contrib/dg-extract-results.sh: Add support for KPASS.
924 (vsx_xxpermdi4_le_<mode> for VSX_W, vsx_xxpermdi8_le_V8HI,
946 * configure.ac: Support for bpf-*-* targets.
1080 * MAINTAINERS: Add myself as co-maintainer for Darwin.
1209 * gcc.dg/asan/pr87930.c: ... here. Guard for i?86/x86_64 targets.
1213 * MAINTAINERS (CPU Port Maintainers): Add myself for or1k.
1339 * MAINTAINERS: Adjust email address for me and my colleague Robin
1373 * configure.ac: Introduce support for @unless/@endunless.
1378 first. Output non-target ones changed for configure to depend
1450 * MAINTAINERS: Remove write-after-approval entries for component
1522 * MAINTAINERS: Add entry for SVE maintainership.
1552 * configure.ac: Remove logic adding gdb to noconfigsdirs for or1k.
1605 * MAINTAINERS: Add myself as a maintainer for the Ada front end.
1630 * configure.ac (target-libffi): Don't disable for AIX.
1632 (target-libgo): Don't disable for AIX.
1645 * contrib/gcc_update (files_and_dependencies): Remove stamp rules for
1655 * MAINTAINERS: Readd myself for c6x.
1670 * MAINTAINERS: Add myself as maintainer for PowerPC SPE port.
1685 * config.gcc: Remove rs6000/e500.h from tm_file for all targets.
1730 * configure.ac: Add --enable-werror-always just for
1772 (arc_expand_prologue): Do not emit dwarf info for fast interrupts.
1778 * config/arc/arc.md (simple_return): Update for fast interrupts.
1781 * doc/invoke.texi (mrgf-banked-regs): Document.
1803 * doc/invoke.texi (mirq-ctrl-saved): Document option.
1864 for Andrew Burgess.
1868 * configure.ac: Add gcc/function-tests.o to compare_exclusions for
1877 * MAINTAINERS: Updated maintainers for BRIG FE and libhsail-rt.
1922 * configure.ac: Don't use pkg-config to check for bdw-gc.
1928 * configure.ac: Include pkg.m4, check for --with-target-bdw-gc
1929 options and for the bdw-gc pkg-config module.
2043 * configure.ac: Disable "sim" directory for arc*-*-*.
2052 * configure.ac: Check for the minimum in-tree MPFR version
2073 * configure.ac: Disable libgcj and libgloss for Phoenix-RTOS targets.
2079 * configure.ac: Remove support for avr-rtems.
2112 support for ALTIVEC_BUILTIN_VEC_ADDEC.
2114 for __builtin_vec_addec.
2252 * configure.ac: Enable LTO for DJGPP
2301 * config/isl.m4 (ISL_CHECK_VERSION): Check for
2427 * configure.ac (noconfigdirs): Don't add "target-libgomp" for target
2453 * config/aarch64/iterators.md (VRL2, VRL3, VRL4): Remove values for
2489 * configure.ac: Disable configuration of GDB for HPUX targets.
2504 * configure.ac: Don't disable gprof for moxie.
2528 * configure.ac (ospace_frag): Enable for i?86*-*-elfiamcu
2556 * configure.ac (--vtable-verify): Use AS_HELP_STRING for help.
2623 * MAINTAINERS: Add myself as a reviewer for the AArch64 port.
2632 * Makefile.in: Fix ln source location for vimrc file.
2639 cross-compiling. Similarly for CXX_FOR_TARGET.
2658 Remove Richard Henderson as a maintainer for the x86 port.
2679 * configure.ac [--enable-as-accelerator-for] (enable_languages):
2690 middle-end, docstring): Remove myself.
2740 * MAINTAINERS: Remove Stan Shebs as he has been inactive for
2751 * configure.ac: Don't add ${libgcj} for arm*-*-freebsd*.
2762 * MAINTAINERS (CPU Port Maintainers): Add myself for Visium port.
2771 * configure.ac: Use OBJCOPY for OBJCOPY_FOR_TARGET.
2782 * configure.ac: Check for already installed target objcopy.
2805 * configure.ac (--enable-as-accelerator-for): Don't set
2929 Restrict liboffloadmic for POSIX and i*86, and x86_64 architectures.
2938 * configure.ac (--enable-as-accelerator-for)
2991 --enable-shared also for libcc1's benefit.
3014 * doc/invoke.texi (SPARC options): Add mcpu=leon3v7 comment.
3090 (ISL_CHECK_VERSION): Check for functionality added to ISL 0.12 instead
3091 of checking for version number.
3260 Fix include path for in-tree cloog.
3285 "module_srcdir" instead of "module" for locating a module's srcdir.
3325 * configure.ac (target_makefile_frag): Set for nios2-*-elf*.
3372 for WINDRES_FOR_TARGET in default-manifest.o rule.
3382 * Makefile.def: Set bootstrap=true; for host fixincludes.
3410 -I for libstdc++-v3 includes if $(LEAN).
3458 * configure.ac: Add user-friendly check for native x86_64-linux
3506 libcilkrts for POSIX and i*86, and x86_64 architectures.
3542 * configure.ac: Also add target-libgloss to noconfigdirs for arceb-*-*.
3674 * configure.ac: Set libgloss_dir for the aarch64*-*-* targets.
3723 * MAINTAINERS (arc): Add new port maintainership for myself.
3840 Rename area for Dodji Seketeli (dodji@redhat.com).
3858 * configure.ac: Enable libsanitizer just on x86 linux for now.
3869 * configure.ac: Add section for configdirs for libsanitizer.
3870 Disable for cris-*-* and mmix-*-*.
3879 * libsanitizer: New directory for asan runtime. Contains an empty
3884 * configure.ac (FLAGS_FOR_TARGET,target=cygwin): Fix for building
3895 and handle defaulted state only for VxWorks, ARM-wince-pe and AVR.
3916 * configure.ac (have_static_libs): Force 'no' for GCC version < 4.5.
3939 * MAINTAINERS: Adjust for changed surname.
3987 * libtool.m4 (_LT_COMPILER_PIC): Add -fPIC to GCC and GXX for AIX.
3989 * configure.ac: Add target-libquadmath to noconfigdirs for AIX.
3990 Add libgomp*.o to compare_exclusions for AIX.
4137 * config/cloog.m4: Remove support for CLooG-ppl and CLooG-parma,
4207 allow for the fact that from release v3.1.0 of MPFR the source
4250 (noconfigdirs): Don't add ${libgcj} for mips*-*-irix6*.
4263 * configure.ac: Enable gdb and readline for ia64*-*-*vms*.
4279 and Joseph Myers as docstring relicensing maintainers.
4324 * configure.ac: Fix regexp for same.
4375 * configure.ac: Remove ranlib special-casing for Darwin.
4388 * configure.ac: Add tool checks for READELF and READELF_FOR_TARGET.
4405 * configure.ac: Test for libitm directory present first.
4407 * configure.ac: Adjust srcdir for running libitm/configure.tgt.
4456 (nacl): Grok as alias for 32el-unknown-nacl.
4579 Remove case-statement setting skipdirs=target-libiberty for
4595 * configure.ac: Skip target-libiberty for
4666 * configure.ac: Remove code setting special library locations for
4667 hppa*64*-*-hpux11*. Remove code setting compiler for
4702 * configure.ac: Disable Java for targets not supporting libffi.
4877 * configure.ac: Add support for *-*-dragonfly*
5082 Prepare for supporting FreeBSD 10.
5088 Remove support for FreeBSD 1.x.
5101 * Makefile.def (lto-plugin): Double dash for enable-shared.
5125 * Makefile.def: Add dependency for install-gcc
5136 * configure.ac: Discard --with-* flags for host when configuring
5137 target libraries for cross build.
5159 * configure.ac: Check for version 0.11 (or later revision) of PPL.
5183 for ia64-hpux.
5242 * configure.ac: Always set default for poststage1_ldflags to
5263 * configure.ac: Correct comments for --enable-gold/--enable-ld.
5325 * configure.ac: Check for lang_requires_boot_languages in
5349 * MAINTAINERS (Various Maintainers): Add self for build machinery.
5399 * configure.ac (*-*-darwin*): Use mh-darwin for all Darwin variants.
5422 * Makefile.def (target_modules): Set lib_path to src/.libs for
5429 * MAINTAINERS (Reviewers): Add myself for gengtype/GTY.
5434 * MAINTAINERS (OS Port Maintainers): Add myself for VMS.
5438 * MAINTAINERS (OS Port Maintainers): Add myself for VMS.
5443 (--enable-lto): Turn on by default for all non-ELF platforms that
5445 for both ELF and non-ELF.
5479 * MAINTAINERS (CPU Port Maintainers): Add myself for MicroBlaze port.
5547 Provide -B option to allow for link spec %s substitutions for
5570 * MAINTAINERS (CPU Port Maintainers): Add myself for xtensa port.
5628 * configure.ac: Check for elf_getshdrstrndx or elf_getshstrndx
5680 * MAINTAINERS (CPU Port Maintainers): Add myself for spu port.
5711 * configure.ac: Only pass -c to ranlib for darwin9 and earlier.
5796 * MAINTAINERS: Add myself as a maintainer for the bfin port.
5800 * configure.ac: Add "recommended" version checks for GMP/MPC.
5842 * MAINTAINERS (CPU Port Maintainers): Add myself for avr port.
5889 builting for an elf target.
5930 * configure.ac: Check for version 0.15.5 or later revision of CLooG.
5950 * Makefile.def: Restore host and target settings for gmp.
5989 paths for *-w64-mingw* and x86_64-*mingw*.
5994 * MAINTAINERS (Write After Approval): Add entry for my INRIA work.
6003 * configure.ac: Disable target-winsup & co for
6009 * MAINTAINERS: Add myself as a maintainer for the RX port.
6022 * configure.ac: Do not set LIBS for ppl/cloog checks. Disable
6044 Refer to http://gcc.gnu.org/bugs/ for bug reporting instructions.
6073 set bootstrap=true for lto-plugin.
6157 * configure.ac: Disable java and boehm-gc for bfin-*-*.
6164 (Waiting for paperwork): To here.
6172 * configure.ac: Do not use $extrasub for replacing @if/@endif
6259 (func_mode_help): Document new -bindir option for link mode.
6284 * configure.ac: Do not exclude gas for i386-*-darwin.
6285 Add a case for x86_64-*-darwin.
6342 target_libs for some boot language. Add --with-stage1-ldflags,
6361 * configure.ac: Define is_elf for QNX Neutrino targets.
6397 * configure.ac: Support gold for target arm*-*-*.
6497 * MAINTAINERS: Replace Aldy Hernandez as a maintainer for the FRV.
6502 (POSTSTAGE1_FLAGS_TO_PASS): Pick up exported value for GNATBIND.
6538 * configure.ac: Restore match for darwin9 or later. Use double
6668 (with_ppl, with_cloog): Test for "no".
6677 * MAINTAINERS (OS Port Maintainers): Add myself for GNU/Hurd.
6721 Approval to Reviewer section (for Fortran front-end).
6764 * configure.ac: Build gdb for i?86-*-darwin*
6970 Add checks for PPL and CLooG.
7003 * MAINTAINERS: Use correct Umlaut for last name.
7025 * configure.ac: Add makefile fragments for hpux.
7099 of libobjc for ARM EABI Linux.
7159 * configure.ac (cr16-*-*): Add case for cr16 target and include gdb
7174 * configure.ac: Do not build libssp for the AVR.
7189 * configure.ac: Run ACX_CHECK_CYGWIN_CAT_WORKS for cygwin hosted
7196 * configure.ac: Combine rules for mingw32 and mingw64.
7232 * configure.ac: Add support for --enable-gold.
7269 * MAINTAINERS: Update for treelang deletion.
7300 * Makefile.def: Define stage_libcflags for all bootstrap stages.
7308 for target modules. Don't export LIBCFLAGS.
7328 * configure.ac: Enable fortran for cris-*-elf and crisv32-*-elf.
7340 ac_subdirs_all, for `./configure --help=recursive'.
7407 * configure.ac: Enable libjava for x86_64-*-darwin9.
7480 LDFLAGS_FOR_BUILD): Default them to host flags only for $host = $build.
7495 * configure.ac: Default them to host tools for $host = $build.
7528 * Makefile.def: Add libgomp config as a maybe dependency for libstdc++.
7553 to $skipdirs and only disable gprof for newlib. Use the normal
7590 checking for stage1.
7753 * configure.ac: Don't add target-libmudflap to noconfigdirs for
7831 * configure.ac: Don't use -fkeep-inline-functions for GCC < 3.3.1.
7967 * Makefile.def (dependencies): Add dependency for
7983 * configure.ac: Adjust for loop syntax.
8029 * configure.ac: Correct syntax for Solaris ksh.
8050 * configure.ac: ...this. Update AC_PREREQ. Prevent error for
8053 arguments for autoconf 2.59. Discard variable settings. Force
8054 program_transform_name for native tools.
8089 * configure.in: Re-enable -Werror for gcc builds.
8132 * configure.in: Add support for an x86_64-mingw* target.
8137 * Makefile.tpl (all-target): Correct @if conditional for target
8144 * configure.in: Use DEV-PHASE to detect default for --enable-werror.
8153 on gcc even for bootstrapped modules. Rewrite handling of
8161 --enable-stage1-languages. Show supported languages for the chosen
8187 * configure.in: add AC_SUBST for *_FOR_TARGET.
8192 * configure.in: Simplify logic for rejecting languages that cannot
8198 * configure.in: Remove "$build" case for powerpc-*-darwin* since
8256 * configure.in: Correct x86 darwin support for libjava to powerpc
8262 * configure.in: Add x86 darwin support for libjava.
8267 * Makefile.def (dependencies): Add dependency for
8285 * configure.in: Update error message for missing GMP/MPFR.
8322 * configure.in (skipdirs): Don't build libssp for SPU.
8336 * configure.in (skipdirs) : Don't build target-libiberty for SPU.
8349 * configure.in (--with-mpfr-dir): Also look in .libs and _libs for
8355 * Makefile.tpl (clean-target-libgcc): Test for gcc Makefile presence.
8356 (unstage): Test for stage_last presence.
8374 * Makefile.tpl (clean-stage*): Test separately for package/Makefile
8380 * configure.in: Remove target-libgloss from noconfigdirs for
8392 * configure.in: Robustify error message for missing GMP/MPFR.
8448 * configure.in: Check for GMP 4.1 or newer. Check for MPFR 2.2.0
8454 * configure.in (RUNTEST): Look for 'runtest' in the source tree by
8461 for mipstx39-*-*. Disable libgloss for mips64*-*-linux*.
8487 * configure.in: Never build newlib for a Mingw host.
8489 Test the existence of winsup/cygwin for building a Cygwin newlib,
8512 for stages after the first.
8516 * Makefile.def: Add dependencies for configure-opcodes
8544 * configure.in: Add -fkeep-inline-functions to CFLAGS for stage 1
8595 multilib options the same as is done for CFLAGS.
8627 * Makefile.def: Add dependencies for libobjc which boehm-gc.
8630 enable boehm-gc for Objective-C.
8635 Assert that boehm-gc is supported when requested for Objective-C.
8636 Only build boehm-gc if needed either for Java or Objective-C.
8683 * configure.in: Enable gprof for cross builds.
8702 * configure.in: Enable libgcj for hppa*-hp-hpux11*.
8771 * ltmain.sh: Don't use "$finalize_rpath" for compile.
8850 * configure.in: Add support for RDOS target.
8975 * configure.in: Select appropriate fragments for PowerPC/AIX.
9014 (install.all): Set $s for consistency.
9097 to match upstream libtool for darwin.
9101 * Makefile.def: Remove gdb dependencies for gdbtk.
9157 * configure.in: Check for $OBJDUMP_FOR_TARGET.
9200 * ltmain.sh: add support for installing into temporary
9247 and substitute it for fortran, issuing a warning.
9284 NCN_STRICT_CHECK_TOOLS, and likewise for NCN_STRICT_CHECK_TARGET_TOOLS.
9285 Look for alternate names of the target cc and c++
9294 (Target tools): Look in the environment for them.
9311 * MAINTAINERS: Update for removed CPU targets.
9355 * configure.in: Add cases for Renesas m32c.
9371 * configure.in: Add toplevel noconfigdir support for tpf.
9445 <cris-*, crisv32-*> Ditto, except for non-aout, non-elf,
9462 * config.sub: Add cases for the Renesas m32c. (This patch has been
9469 * configure.in: Set noconfigdirs for ms1.
9496 (Dependencies): Consider target modules for bootstrap dependencies.
9523 lt_cv_sys_max_cmd_len for now.
9578 libgcj_ex_libffi. Have specific match for *-*-linux*. Separate
9579 matches for "*-*-aout" and "*-*-elf". Don't disable libffi for
9597 * MAINTAINERS (Port Maintainers): Add self for Blackfin.
9710 $(HOST_SUBDIR). Create a symlink for host_subdir.
9808 for the directory and for include. BUILD_SUBDIR and
9818 * MAINTAINERS: Move myself to OS Port Maintainers for windows,
9945 * config-ml.in: Pass FCFLAGS for multilibs, handle GFORTRAN
9963 * Makefile.def: Build fixincludes for the host, too.
9976 * configure.in: Set up LD_LIBRARY_PATH by default for gcc.
9986 * configure.in (case ${target}): Do not build fixincludes for avr.
10044 * configure.in: Enable target-libgloss for crx-*-*.
10166 * config.guess (*:FreeBSD:*:*): Remove check for glibc (unneeded
10217 * config.sub: Add support for National Semiconductor CRX target.
10226 * configure.in: Remove target-libstdc++-v3 from noconfigdirs for
10254 * configure.in: add test for powerpc-*-darwin* to specify makefile frag
10256 * config/mh-ppc-darwin: create file, override BOOT_CFLAGS for
10297 * gcc/doc/install.texi: Update entry about automake for libjava.
10313 for bootstrapped modules if toplevel bootstrap is going.
10314 (GCC bootstrap): Generate per-stage targets for all bootstrapped
10315 modules. Adjust for changes in Makefile.def. Enable several
10325 (BISON): Update for recent Bisons.
10330 (dep-kind): Accept separate prefixes for MODULE and ON variables.
10377 * configure.in: Check for MPFR as well as GMP.
10383 libmudflap for all GNU-based systems (with Glibc).
10393 (host modules): Add a small special-casing for gcc. Export
10397 other recursive targets for gcc): Remove.
10413 * configure.in: Sync from src, add noconfigdirs for crx-*-*.
10450 * Makefile.def (host_modules): Set bootstrap=true for flex.
10481 * configure.in: Better support for multiple build modules,
10482 matching what is done for host/target modules. Do not look
10483 for "plausible" locations of build tools if Canadian cross.
10485 BUILD_DIR_PREFIX. Look for flex, makeinfo and m4.
10517 * configure.in: Check for srcdir/winsup rather than build directory
10539 provide a hook for additional setup commands.
10542 (stageN-bubble): Add commands for successive stages from
10602 * config-ml.in: Pass FFLAGS and ADAFLAGS for multilibs, handle F77
10607 * configure.in: Fix sed invocation for GFORTRAN_FOR_TARGET.
10629 entry for behavioral changes.
10656 * Makefile.tpl: Add dependencies on and for libcpp.
10674 * MAINTAINERS (Various Maintainers): Add myself for compat testsuite.
10731 * config/acx.m4: Fix fastcompare support for new-bootstrap.
10857 for stages 2 and 3 as well as in make. As a consequence, remove
10878 * configure.in: Comma-separate stage 1 language list for top
10910 * configure.in: Introduce support for top level bootstrap.
10943 * configure.in: Find default values for the tools as
10946 --enable-languages=all for the gcc subdirectory.
10975 * Makefile.tpl: Add dependency for configure-target-libada.
11116 * Makefile.tpl: Special-casing not needed for GCC any more.
11119 * configure.in: Don't share a cache file for host dirs.
11137 * configure.in: Don't use shared config.cache for target
11193 * ltcf-c.sh: Likewise, disable shared library build for OS-X < 10.3.
11280 * ltconfig (sys_lib_search_path_spec): Fix a typo for HPUX.
11289 to CPU platform maintainers for pdp11 platform.
11379 shell arguments in a for loop.
11393 * configure.in (TOPLEVEL_CONFIGURE_ARGUMENTS): Quote properly for
11404 * configure.in: Disable libgcj for darwin not on powerpc.
11434 * configure.in: Enable libgcj for darwin.
11506 * configure.in: Add ${libgcj} to noconfigdirs for xtensa-*-* targets.
11528 * intl: New directory; see intl/ChangeLog for details.
11594 * configure.in: Don't pass --with-stabs for mips*-sgi-irix6*o32.
11687 * configure.in: Accept i[3456789]86 for machine type.
11803 * config-ml.in: Remove support for --disable-aix removing
11889 * configure.in: Add support for kaOS as cross build target system.
11908 flags for preprocessor tests.
11925 for maintainer mode.
11962 * MAINTAINERS: Remove duplicate entry for Bernd Schmidt from Write
11998 * MAINTAINERS: Remove incorrect entry for Paul Eggert. Fix
12073 * configure.in: Add AC_PREREQ for consistency.
12084 * configure.in (LD): Improve test for gcc. Try to set LD to the ld
12112 for Makefile existence. Drop config.status from dependencies.
12181 * Makefile.tpl: Use shared multilib.out. Use move-if-change for it.
12283 * Makefile.tpl: Change dependency for */multilib.out so that
12297 * Makefile.tpl: Add targets for configuring host subdirs in Makefile,
12301 * configure.in (host_tools): Order binutils, gas and ld for
12319 options given by the user. Add machinery to put args for host
12344 * Makefile.tpl: Remove leftover support for non-autoconfiscated
12369 targets for 'no_install' modules.
12404 * ltmain.sh (osf): Prefix $major with . for use as extension.
12462 * configure: Add support for extra required flags for ar or nm.
12463 * configure.in (aix4.3+): Use above support for target-specific
12471 formerly hard-coded in the Makefile for build=host.
12488 * MAINTAINERS: Remove "co-maintainer" note for web pages.
12504 ${libgcj} for glibc1.
12547 * Makefile.tpl: Add configure-target (for src-release in src)
12678 lt_cv_file_magic_test_file): Set to appropriate values for HP-UX
12700 powerpc64*-*-linux* entry. Add target-libffi for the latter.
12795 * configure.in: Add support for ip2k.
12821 * config.sub: Add support for avr target.
12835 * configure.in: Add support for frv.
12836 * config.sub: Add support for frv.
12875 * configure.in (vax-*-netbsd*): Don't build gas for this
12881 and libgcj for AVR.
12894 * Makefile.in: Allow for PWDCMD to override hardcoded pwd.
12930 * config-ml.in: Allow for PWDCMD to determine ML_POPDIR.
12976 * configure.in: Eliminate redundant test for libgui.
12981 for Dan Berlin, Chris Demetriou and Michael Matz. Remove
12982 entry for a29k port maintainer.
13011 if there's no configure script for it.
13051 * Makefile.in: Add all-tix to deps for all-snavigator
13056 * configure.in (ia64*-*-hpux*): New target for IA64 HP-UX,
13062 Allow target-libgloss to be built for arm, strongarm, and xscale.
13067 options for i[3456]86-pc-linux* native builds.
13072 files from .po files for a distribution.
13076 * configure.in: Enable libstdc++-v3 for h8300 targets.
13090 * configure.in : enable ld for aix
13094 * config.guess: Add linux target for S/390.
13102 * Makefile.in (ETC_SUPPORT): Add configure.texi and associated info
13146 Fix for: PR bootstrap/3591, target/5676
13152 * configure.in: Enable libgcj for xscale-elf target.
13177 * MAINTAINERS: Add myself as maintainer for xtensa port.
13187 * configure.in: Enable gprof for mips*-*-linux*.
13195 * configure.in (libstdcxx_flags): Don't add libstdc++-v3 flags for
13202 because its Makefile is there; test for the executable instead.
13206 * configure.in (CXX_FOR_TARGET): Add -shared-libgcc for
13211 * gcc/Makefile.in: Removed libstdc++-v3 dependancy for libjava and
13228 * MAINTAINERS: Put self in as maintainer for x86-64 port.
13233 * MAINTAINERS: Put self in as maintainer for contrib/regression
13244 libraries if not supported for NetBSD on target CPU.
13248 * install-sh: Use _inst.$$_ for temp file name.
13293 (rs6000_initialize_trampoline): Call __trampoline_setup for
13304 * configure, configure.in: Use temp file for long sed commands.
13312 * MAINTAINERS: Update mail address for config.* patches.
13317 When build != host, create libiberty for the build machine.
13329 * configure: Calculate and substitute proper value for
13375 syntax. Check for empty lists better. Warn about $LANGUAGES.
13388 * Makefile.in (MAKEINFO): Use "missing" for makeinfo older than 4.0.
13446 * Makefile.in (EXTRA_TARGET_FLAGS): Pass RANLIB_FOR_TARGET for
13455 (NATIVE_CHECK_MODULES): Ditto, just for consistency.
13461 Solaris when testing for the /usr/ucb/cc compiler; it has incorrect
13470 * ltcf-cxx.sh: Add support for GNU.
13472 * ltcf-c.sh: Don't disable shared libraries for AIX5/IA64. Preserve
13485 * config.sub: Merge from master sources, add support for mipsisa32.
13489 * MAINTAINERS: Add self as contact for stormy16 port.
13545 residing in gcc/doc/install.texi.
13687 * config.guess: Add hppa64-linux support. Note for next import that
13689 * configure.in: Likewise. Accept `parisc' alias for `hppa'.
13730 * configure.in (CXX_FOR_TARGET): Use xgcc for libstdc++-v3.
13741 * ltcf-c.sh: Clear ac_cv_prog_cc_pic for DJGPP. Do not add
13742 '-DPIC' to ac_cv_prog_cc_pic for DJGPP.
13777 * Makefile.in (DO_X): Use double quotes for quoting
13782 * MAINTAINERS: Added Stan Shebs as new maintainer for Objective-C.
13786 * configure.in: Only use `lang_requires' for languages athat are
13848 for Cygwin hosts.
13862 * config.guess: Add linux target for S/390.
13867 * configure.in: for *-chorusos, don't config target-newlib and
13876 * ltcf-c.sh: Add support for -no-undefined under GNU/Linux.
13888 * include/demangle.h: Add prototype for java_demangle_v3.
13906 * ltconfig: Shell portability fix for the tagname validity check.
13942 * configure.in: Enable libgcj for linux targets.
13963 * ltcf-c.sh: Clear ac_cv_prog_cc_pic for DJGPP. Do not add
13964 '-DPIC' to ac_cv_prog_cc_pic for DJGPP.
13975 * configure.in: remove supported directories from $noconfigdirs for DJGPP.
13999 * config.if: Remove expired bits for cxx_interface, add stub.
14000 (libstdcxx_incdir): Add variable for g++ include directory.
14020 * configure.in: Disable libgcj for any target not specifically
14021 listed. Disable libgcj for x86 and Alpha Linux until compatible
14034 * configure.in: Disable language-specific target libraries for
14039 * configure.in: Define libgcj. Disable libgcj target libraries for
14160 * ltconfig (aix4): Define library and soname specs appropriate for
14165 * config.sub: Add support for Sun Chorus
14170 <name>@redhat.com. Also installed new email address for Clint
14184 * config.if: Search libstdc++-v3/configure.in for INTERFACE,
14185 when configured for libstdc++-v3.
14233 * configure.in: Do not build byacc for hppa64. Provide paths to the
14234 X11 libraries for hppa64.
14266 * configure.in (FLAGS_FOR_TARGET): Use -nostdinc even for Canadian
14267 crosses, but add gcc/include to the header search path for them.
14284 $$r/TARGET_SUBDIR/libio for _G_config.h.
14297 (LD_LIBRARY_PATH, SHLIB_PATH): Adjust for multilibs and export to
14348 * configure.in (FLAGS_FOR_TARGET): invert test for xgcc, should mean
14376 * ltcf-c.sh (need_lc): Fix test message. Set wl for archive_cmds.
14385 CXX_FOR_TARGET for sed.
14421 * configure.in: Use the same cache file for all target libs.
14454 search path for a g++ extracted from the build tree. This
14460 * ltconfig: Add support for mips-dde-sysv4.2MP
14468 * ltconfig: Check for host_os beeing one of `cygwin', `mingw' or
14473 * configure.in (noconfigdirs): Set noconfigdirs for tic54x target.
14494 $(build_tooldir)/include is searched for header files,
14495 $(build_tooldir)/lib/ for library files.
14501 * configure.in (hppa*64*-*-*): Do build ld for this configuration.
14572 * config.sub (case $basic_machine): Change default for "ibm-*"
14640 * configure.in: Add entry for mips*-*-linux*, move catch all
14658 * config.sub: Add support for Linux/IBM 370.
14676 * config.sub: Add support for avr target.
14680 * MAINTAINERS: Add maintainers for MCore port.
14704 * configure.in: Don't build some bits for beos.
14767 * config.sub: Add support for configuring for pj.
14771 * config.sub (maybe_os): Add support for configuring for fr30.
14775 * configure.in: Do not configure or build ld for AIX
14869 * configure.in: Build ld, binutils & gas for hppa*-*-linux-gnu*.
14921 * configure.in (noconfigdirs): Don't build libstub for arm-elf targets.
14922 (noconfigdirs): Don't build any bsp stuff for for arm-oabi targets.
14947 * config.sub: Add support for mcore targets.
14958 dependency list for all-target-cygmon.
14962 * config-ml.in: Check $host, not $target, for selective multilibs.
14983 * config.guess: Correct typo for detecting ELF on FreeBSD.
14993 all-target-newlib to dependency list for all-target-bsp.
15002 * configure.in: cleanup, add mh-*pic handling for arm, special
15021 * config.sub: Check for "cygwin*" rather than "cygwin32*"
15030 include target-bsp only for m68k-*-elf* and m68k-*-coff*
15032 m68k-aout. Ditto for arm-*-*oabi.
15062 * configure.in: Added target-bsp for sparclite.
15070 * configure.in: Add support for strongarm port.
15071 * config.sub: Add support for strongarm target.
15081 * configure.in: Do build ld for ix86 Solaris.
15086 $AR_FOR_TARGET. Likewise for RANLIB.
15099 * config.guess: Add support for i386-pc-interix.
15112 * configure.in: makefile stub for cygwin target is probably
15113 unnecessary. Remove it for now.
15136 * configure.in: Add cygmon for x86-coff and x86-elf. Configure
15137 cygmon for all sparclite targets, regardless of object format.
15141 * configure.in: Added target-bsp for several target architectures.
15143 * Makefile.in: Added rules for bsp.
15155 * configure (skip-this-dir): Add handling for new shell script, which
15163 account for the cygwin name change.
15195 * configure.in: Use -Os to build target libraries for the fr30.
15256 * config.sub: Add support for i[34567]86-pc-udk.
15261 * Makefile.in: add bzip2 package building bits for user
15284 * configure.in: Minor cleanups for building in the $(target_alias)
15303 * config.sub: Add support for C4x target.
15312 * config.guess: Match "Pent II" or "PentII" for OpenServer.
15357 * configure: Fix --without/--disable cases for gxx-include-dir.
15361 * mdata-sh: Imported. Needed for automake support.
15408 * config.guess: (*-pc-sco3.2v5) Add detection for Pentium II.
15409 (*-pc-unixware7) Add detection for Pentium II, Pentium Pro.
15417 * ylwrap: Change absolute path checks to check for DOS style path
15459 * configure.in: Don't build some bits for beos.
15502 themselves. Emit make macros for both gcc_version vars.
15523 * configure.in (noconfigdirs): Add configure pattern for mips tx39
15528 * configure.in: Add cygmon and libstub support for mn10200.
15534 * Makefile.in (libsubdir): Add new macro for the directory
15549 * config.guess: Detection of Pentium II for *-sco-3.2v5*.
15561 * configure.in: Add cygmon and libstub support for mn10300.
15652 using -Os for d10v and m32r if --{enable,disable}-target-optspace is
15654 * configure.in (target_cflags): Ditto for d30v.
15678 * configure.in: Ditto. Build libstub for targets that have cygmon
15730 * configure: Do not disable building gdbtk for cygwin32 hosts.
15757 for newlib directory.
15762 * ltconfig: Update after libtool/ltconfig.in change for
15792 to be the case for libiberty.
15805 * configure.in: Revert 3 Jan change for powerpc-linux-gnulibc1.
15819 * configure.in: Remove libgloss from noconfigdirs for MN10300.
15823 * configure.in: Don't build libgui for a cygwin32 target when not on
15857 * configure: Emit a definition for the new macro enable_shared
15866 * configure.in: add target-gperf to noconfigdirs for Cygwin32.
15894 * configure.in: Do build expect, dejagnu, and cvssrc for a cygwin32
15897 * config.guess: Use ${UNAME_MACHINE} rather than i386 for cygwin32
15925 * config.guess: Add support for Linux/ARM.
15934 * configure.in: Revert 3 Jan change for alpha-linux-gnulibc1.
15953 * configure.in (target_configdirs): Add cygmon for sparc64-elf.
15980 * configure.in: Finalize support for {alpha|powerpc}*-*-linux-gnulibc1
15985 * configure (gxx_include_dir): Provide a definition for subdirs
16059 * configure.in (noconfigdirs): Add support for Thumb target.
16061 * config.sub (maybe_os): Add support for Thumb target.
16065 * Makefile.in: Add rules for cygmon.
16067 * configure.in: Build cygmon for sparc-elf and sparclite-aout.
16072 * configure (gxx_include_dir): Provide a definition for subdirs
16107 for the D30V.
16136 targets using "$@" to provide support for similar but not identical
16189 * configure (tooldir): enable_gdbtk=YES for cygwin32, NO for
16205 * configure.in: remove bison from noconfigdirs for Cygwin32 host
16211 * configure.in (skipdirs): Add target-librx for Linux.
16220 * config.sub: Accept 'amigados' for backward compatibility.
16236 * configure.in (*-*-rtems*): Do not build libgloss for rtems.
16275 * configure.in (noconfigdirs): Add support for v850e target.
16277 * config.sub (maybe_os): Add support for v850e target.
16281 * configure.in (noconfigdirs): Add support for v850ea target.
16283 * config.sub (maybe_os): Add support for v850ea target.
16315 * configure: If OSTYPE matches *win32*, try to find a good value for
16340 attempting to substitute ${config_shell} for SHELL. On
16345 * Makefile.in (EXTRA_GCC_FLAGS): Fix for non-bash shells.
16366 for libraries.
16401 * configure.in: Likewise. Don't remove gprof for go32.
16434 * install-sh: Add support for -x option.
16455 * configure.in: configure sim before gdb for win32-x-ppc
16491 * configure.in: Use mh-ppcpic and mt-ppcpic for powerpc*-* targets.
16495 * Makefile.in: Add comment for CFLAGS and CXXFLAGS.
16501 * configure.in: Build itl, db, sn, etc., when building for native
16526 designators. Also look for "?:*" as the leading characters in an
16531 * config.sub: Support for r3900.
16539 * Makefile.in (taz): Improve check for BISON so it doesn't try to
16572 * config.guess: improve algorithm for recognizing Gnu Hurd x86.
16596 * config.guess: Fixes for MIPS OpenBSD systems.
16624 cfg-paper*, configure.{texi,man,info*}._
16642 configures and builds for tic80-coff.
16692 noconfigdirs for cygwin32 builds.
16710 target-examples and target-libiberty for d30v.
16714 * configure.in (noconfigdirs): Enable ld for d30v.
16762 * configure.in: build gdb for mn10200
16774 * Makefile.in (MAKEINFO): Check for the existence of the Makefile,
16795 * mpw-config.in: Test for NewFolderRecursive.
16796 * mpw-install: Use symbolic name for startup filename.
16805 * configure.in: Do build gcc and the target libraries for
16810 * configure.in: don't avoid building gdb for mn10300 any more
16858 * config.guess: Patch for Dansk Data Elektronik servers,
16864 Patch for MIPS R4000 running System V,
16867 Fix thinko for nextstep.
16869 Patch for OSF1 in i?86, from Dan Murphy <dlm@osf.org> via Harlan Stenn.
16905 * config.guess: Contributions from bug-gnu-utils to add support for:
16911 Use unknown instead of lynx for hardware manufacturer.
16957 * Makefile.in (CC_FOR_TARGET): Check for xgcc, not Makefile.
16986 * config.guess: Use pc instead of unknown, for pc clone systems.
16994 * test-build.mk (HOLES): Add "xargs" for gdb.
17000 * configure.in: Add support for windows host
17009 * configure.in: If configuring for newlib, pass --with-newlib to
17021 * configure.in: Use config/mh-dgux386 for i[345]86-dg-dgux
17032 * configure.in: Add lots of stuff to noconfigdirs for
17043 * configure.in (noconfigdirs): Don't build libgloss for arm-coff
17048 * mpw-README: Add much more detail for native PowerMac.
17058 * configure.in: You can now configure GDB for the v850.
17071 * configure.in: Use a single line for host_tools and native_only.
17075 * config.sub, configure.in: Add entries for m32r.
17083 * configure.in: Don't config lots of things for *-*-windows*.
17087 * mpw-config.in: Test for mpw-true, true, and null-command scripts.
17093 * configure.in (i[345]86): Recognize i686 for pentium pro.
17094 (i[3456]86-*-dgux*): Use config/mh-sysv for the host configuration
17101 * configure.in (noconfigdirs): Removed gdb for D10V.
17122 depending on choice of compiler, add escape mechanism for
17141 * configure.in (*-*-ose): Remove exclusion of libgloss for this
17146 * mpw-config.in: Generate Mac include for elf/dwarf2.h.
17183 * mpw-configure: Look for g-mpw-make.sed in config/mpw.
17216 * mpw-configure: Add support for --bindir.
17217 * mpw-build.in: Use a GCC-specific build script for GCC actions.
17222 to only build for native toolchains
17234 * configure.in: build diff and patch for cygwin32-hosted
17243 * configure.in: enable dosrel for cygwin32-hosted builds,
17264 * config.guess (*:Linux:*:*): Add support for PowerPC Linux.
17278 * configure: enable_gdbtk=no for cygwin32-hosted toolchains
17309 * config.guess (*:Linux:*:*): Add guess for sparc-unknown-linux.
17385 * configure.in: Don't configure libgloss for unsupported
17403 * Makefile.in: Add support for clean-{module} and
17511 * configure: Check for bison before byacc.
17534 Solaris test for /usr/ucb/cc to the post target script, just after
17563 * config.guess (powerpc-harris-powerunix): Add guess for port
17602 so *-gm-magic can exclude libgloss properly.
17607 for MWC68K compiler.
17629 * config.sub: Add recognition for mips64vr4100*-* targets.
17688 * config-ml.in: Add support for
17703 * config-ml.in (ml_realsrcdir): New, to account for ${subdir}.
17752 for powerpc-pe native.
17758 * configure.in (noconfigdirs): Exclude target-newlib for all versions
17763 * mpw-configure: Add support for exec-prefix.
17785 * configure.in: Don't configure gas for alpha-dec-osf*.
17789 * configure.in: Default to --with-stabs for some targets for which
17818 CONFIG_ARGUMENTS, and always configure for --host only. Add
17821 always using `=' for an option with an argument. Pass a presumed
17826 * config.sub: Merge -macos*, -magic*, -pe*, and -win32 cases
17832 for win32 target systems.
17876 * config.sub: Accept pmac and pmac-mpw as names for PowerMacs,
17877 accept mpw and mac-mpw as names for m68k Macs, change macos7 to
17891 Canadian Cross, use plausible default values for numerous
17912 * configure.in: Before checking for the existence of various files,
17918 for systems with small ARG_MAX values. From phdm@info.ucl.ac.be
17941 for --with-headers option.
18006 * Makefile.in (taz): Grep for '^diststuff:' or '^info:' in
18056 * configure: Fix sed loop which substitutes for CC and CXX to
18061 * cfg-ml-com.in (powerpc-*-eabisim): Delete separate rule for
18066 * configure.in: Stop putting gas and binutils in noconfigdirs for
18071 * cfg-ml-com.in (powerpc*-*-eabisim*): Add support for building
18082 * cfg-ml-com.in ({powerpc,rs6000}-ibm-aix*): Add multilibs for
18084 (powerpc*-*-eabisim*): Add support for building -mcall-aix
18089 * configure.in: Allow configuration and build of emacs19 for the alpha.
18109 them, based on either an existing Makefile or on searching for gcc
18110 in PATH. Substitute for CC and CXX in Makefile.
18117 subdirectories. Substitute for TARGET_CONFIGDIRS and
18153 * configure.in: Don't configure ld and gdb for powerpc*-*-winnt*
18163 * mpw-config.in: Don't test for gC1, test for mpw-touch,
18164 add forward includes for PowerPC include files.
18174 * cfg-ml-com.in (m68*-*-*): Only build multilibs for
18219 * cfg-ml-com.in (powerpc*-*-eabisim): Add support for PowerPC
18226 * cfg-ml-com.in (powerpc*): Add support for -disable-biendian,
18238 Also, need specific check for alpha-unknown-linux (uses COFF).
18272 trying to build the text to print in the warning message for
18300 * configure.in: Don't build newlib for *-*-vxworks5.1.
18304 * configure.in: Don't build newlib for a29k-*-vxworks5.1.
18305 * test-build.mk: Add setting of --with-headers for a29k-vxworks5.1.
18322 * config.sub: Recognize -eabi* for the system, not just -eabi.
18340 for GDB to build.
18344 * testsuite: New directory for customer acceptance and whole tool
18354 * config.guess: Update from FSF, for alpha-dec-winnt3.5 and Crays.
18373 * configure.in (noconfigdirs): Enable all packages for
18378 * configure.in (noconfigdirs): Don't configure tk for i386-go32
18383 Changes for ARM based on patches from Richard Earnshaw:
18385 * configure.in: Omit arm linker only for riscix.
18396 alias for i586. Map new x86 variants p6, k5, nexgen into i586
18409 * config.guess (*:Linux:*:*): Check for whether the pre-BFD linker is
18418 * configure.in: Don't build newlib for m68k-vxworks5.1.
18426 * Makefile.in (all-gcc): Depend on all-ld (for libgcc1-test).
18446 Merge in support for Mac MPW as a host.
18447 (Old change descriptions retained for informational value.)
18449 * mpw-config.in: Add generic include forwards for cpu-specific
18453 * mpw-config.in: Check for presence of required build tools.
18456 (Read Me): Generate as "Read Me for MPW" instead.
18470 (mpw-mh-mpw): Look for in srcdir and srcroot.
18481 * mpw-config.in (readline): Configure it (not built, just used for
18507 * mpw-build.in: New file, top-level build script fragment for MPW.
18508 * mpw-configure: New file, configure script for MPW.
18509 * mpw-config.in: New file, config fragment for MPW.
18521 for netware targets.
18552 * configure.in (noconfigdirs): Don't build gas on AIX, for
18553 powerpc*-*-aix* as well as for rs6000*-*-aix*.
18609 (AS_FOR_TARGET): Check for as.new, not Makefile.
18610 (NM_FOR_TARGET): Check for nm.new, not Makefile.
18622 * configure.in: Configure tk for hppa/hpux.
18648 for special NCD build.
18653 makeall.bat, they're only useful for binutils snapshots.
18679 * config.guess: Update from FSF (for FreeBSD).
18692 * config.sub: Update for recent FSF changes. Remove obsolete
18698 * configure.in (target_libs): Remove libstdc++ for libg++-2.6.1.
18706 status on many systems, only use it for "exit 1", and make it set
18785 * configure.in (arm-*-*): Don't configure ld for this target.
18817 instead of UNIX_SV for UnixWare 1.0).
18841 * config.guess (dummy.c): Redirect stderr for `hostinfo' command.
18850 * configure: Accept and ignore --cache*, for compatibility with
18860 (PATH): Add /.attbin at end for finding uname.
18878 * config.guess: Guess the OS version for HPUX.
18900 * Makefile.in: Remove (for now) librx as a host library,
18901 now that we're building it for target.
18915 is now needed for libg++.
18931 * change CC to /usr/latest/bin/gcc for lynx host builds, since
18970 * configure.in: Use mh-cxux for m88k-harris-cxux*.
19011 * config.guess: Rearrange tests for Alpha-OSF1 to properly deal
19068 * configure.in: Add comments for easier maintenance.
19105 * configure.in: Use ld for i[34]86-*-sysv4* and sparc-*-solaris2*.
19106 Don't set use_gnu_ld to no for *-*-sysv4; that only controls
19167 * config.sub: look for lynx*, not lynx since the OS version may
19194 * configure.in (*-*-lynxos*): Don't configure newlib for either
19223 * configure: Ignore --x-includes and --x-libraries, for Autoconf
19313 * configure.in (noconfigdirs for alpha): Remove libg++ and libio.
19317 * config.guess: Check for ptx.
19368 for GDB and GDB has been fixed to not need it.
19386 * config.guess: Add alternate forms for Convex.
19403 not being configured if -norecursion is set. Correct test for
19407 * configure.in: Don't build gas for alpha-dec-osf1*.
19419 * configure.in, config.sub: Add support for VSTa micro-kernel.
19424 version of GAS for HPPA configurations.
19429 as the default for ${host_alias}.
19447 * configure.in: Don't try to configure newlib for Alpha.
19451 * configure.in: Don't build ld for Irix 5. Don't build gas,
19452 libg++ or libio for any Alpha target.
19458 * Makefile.in (GZIPPROG): Renamed from GZIP, which gzip uses for
19464 of the configdirs list, since the grep checks for an explicit space
19474 * configure.in: Don't configure ld, binutils, or gprof for Apollo.
19483 "fi ; else" for bash.
19491 * config.sub: accept unixware as an alias for svr4.2.
19513 etc/make-stds.texi. The underscore came from gcc, and dje now
19536 * configure.in (hppa target): check the source directory for the
19545 * configure.in: Don't build ld on i386-solaris2, same as for
19550 * Makefile.in (taz): Add texinfo/lgpl.texinfo (for libg++).
19554 * configure.in: Configure gdb for alpha.
19562 * config.guess: added support for DG Aviion
19566 * configure.in: Produce warning message for subdirectories not
19567 configurable for this host/target combination. Don't try to
19568 configure gdb for vms.
19579 * config.sub: also handle mipsel and mips64el (for little endian mips)
19587 * configure.in: Build newlib for LynxOS native.
19591 * config.guess: Add support for delta 88k running SVR3.
19607 * configure.in: Build linker and binutils for alpha-dec-osf1.
19611 * Makefile.in: Remove -O from CXXFLAGS for consistency with CFLAGS,
19625 * config.sub: Recognize mips64, and mips3 as an alias for it.
19634 * configure.in: Recognize hppa*-*-hiux* (currently synonym for hpux).
19637 Remove redundant cases for hp9k[23]*.
19654 * configure.in: Build gas, ld, and binutils for *-*-sysv4* and
19669 * config.guess: Accept 34?? as well as 33?? for NCR.
19673 * configure.in: grab mt-hppa for HPPA targets; use 'gas ' instead
19678 * configure: grab values for $(CC) and $(CXX) from the
19682 * configure.in, Makefile.in: add support for gash, the tcl
19722 * install.sh: add some 'else true' clauses for portability
19724 * configure.in: don't build libio for h8[35]00-*-* targets
19728 * Makefile.in: Add support for new libio.
19754 Added test for mips-mips-riscos5.
19758 * configure.in: use mh-hp300 for 68k HP hosts
19762 * configure: add support for CONFIG_SHELL, so that you can use
19763 some alternate shell for evaluating configure scripts
19800 * test-build.mk: support for CONFIG_SHELL
19844 * configure.in: Use config/mh-riscos for mips-*-sysv*.
19848 * configure: Correct error message for missing Makefile.in to
19884 * Makefile.in: Change extension for gzip'd files from '.z' to
19897 * configure.in: Build diff for crosses, but not for go32 host.
19899 * configure.in: Build gprof only for native, and don't build it
19900 for mips-*-*, rs6000-*-*, or i[34]86-*-sco*.
19904 * configure.in: don't build gas,ld,binutils on for *-*-sysv4
19929 * Makefile.in (vault-install): add an 'else true' (for Ultrix)
19939 Change from Utah for HPPA support:
19944 * config.guess: Add support for Motorola Delta 68k, up to r3v7.
19949 * config.sub: Add support for rom68k and bug boot monitors.
19957 * config.guess: Added special check for i[34]86-univel-sysv4*.
19961 * config.guess: For i[34]86-unknown-sysv4 use UNAME_MACHINE for
19975 * build-all.mk (all-cross): New target for Canadian Cross.
19983 * configure.in: fix Alpha GDB typo; also, don't build DejaGnu for
19996 * Makefile.in: add standards.texi and make-stds.texi to ETC_SUPPORT
20022 proto-dir". Look for "VERSION=" only at start of line in subdir
20023 Makefile. Use "gzip -9" for compression.
20035 for this target.
20043 (gcc-no-fixedincludes): Correct for current gcc Makefile.
20084 * configure (tooldir): Fix for i386-aix again.
20114 * config.sub: Use sysv3.2 not sysv32 for canonical OS
20115 for System V release 3.2.
20120 * configure.in: Do configure ld/binutils/gas for it.
20124 * configure (tooldir): Alter syntax used to set this, for systems
20134 * Makefile.in (gas+binutils.tar.z): New rule for building snapshots
20151 * test-build.mk: Pass -with-gnu-as for known MIPS native and MIPS
20152 targets, rather than for MIPS hosts.
20156 * configure.in: add comment for --with-x default values
20158 * config.guess: handle Motorola Delta88 box for SVR3 and SVR4.
20160 * Makefile.in: add check-* targets for each of the directories in
20169 * build-all.mk: Set assorted targets for Q2.
20181 * build-all.mk: -G 8 no longer required for MIPS targets.
20187 * Makefile.in (gdb.tar.Z): Fix for building gzip'd distribution.
20192 * test-build.mk: Use -with-gnu-as for mips-sgi-irix4 as well.
20194 * build-all.mk: Set GCC to gcc -O -G 8 for MIPS targets, since gcc
20212 * configure.in: Build gas for mips-*-*.
20231 enough to adapt for gdb sometime. Build only .z file.
20241 for handling BISON for FSF releases.
20258 * configure: add support for package_makefile_fragment, handle the
20261 add support for --without (and add this to the usage message); also
20280 also strip out a number of tools to not build for go32 host
20291 * Makefile.in (do-info): Removed obsolete check for existence of
20298 * Makefile.in: a couple of 'else true' for decstation,
20299 support for TclX
20310 * configure.in: Use config/mh-aix386 file for it.
20343 gas for mips-dec-bsd.
20357 for Bosx, an AIX variant from Bull.
20363 Migrated dejagnu testcases and support files for testing software
20384 * README: Update for gdb-4.8 release.
20419 variables holding settings for specific sub-makes.
20453 * Makefile.in (make-gdb.tar.Z): Change BISON to 'bison -y' for
20482 * Makefile.in (make-gdb.tar.Z): New location for texinfo.tex.
20540 * test-build.mk: set $PATH for all builds
20542 * Makefile.in: pass TARGET_FLAGS_TO_PASS for xiberty and libm
20561 to i386-sco3.2v4. Set TARGETS and CFLAGS for i386-sco3.2v4.
20564 * test-build.mk (stamp-3stage-compared): Use tail +10c for
20581 * Makefile.in: get rid of earlier definitions for *clean,
20612 one, added additional targets to satisfy standards.texi, deleted
20613 some old targets, some changes for consistency
20629 * Makefile.in: all, clean, and install rules for the new programs
20634 * configure.in: use mh-sun for all *-sun-* hosts
20638 * Makefile.in: define flags for X11 include files and library file
20645 * configure.in: start building libg++ for HP-UX targets
20659 names for FSF compatibility.
20720 matters for the libg++ configuration if reconfiguring a tree that
20725 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
20737 We need them for unusual native builds, like systems without
20741 $(target_canonical), which are the full, canonical names for the
20746 * Makefile.in: Added separate definitions for C++.
20754 * README: Update for configure.texi and gdb-4.7 release.
20777 * config.sub: Complain if no argument is given. Added support for
20794 * configure.in: use *-*-* instead of nested cases for host and target
20800 matters for the libg++ configuration if reconfiguring a tree that
20821 even for a native compilation.
20828 (DEVO_SUPPORT): Add configure.texi.
20833 * Makefile.in: added -I for newlib/targ-include to XTRAFLAGS, to
20837 with alias of adobe68k. Changed configure.in to check for
20870 configure.texi: added documentation for -program_prefix,
20885 * Makefile.in: don't create all directories for ``make install'';
20897 * configure.texi, standards.texi: fix INFO-DIR-ENTRY
20916 es1800 is alias for m68k-ericsson-OSE
20950 * Makefile.in: adjust directory-creating script for losing decstation
20969 dependency lines for other tools (which now use byacc).
20982 * config.sub: Add support for Linux.
20984 (at least for libg++).
20988 * configure.texi: fix doc for the -nfp option to configure
21039 * standards.texi: updated to 3 may, fixed librid <-> libdir typo.
21048 * configure: get makesrcdir right for subdirs deeper than 1.
21059 * standards.texi: added menu item.
21063 * standards.texi: new file.
21067 * configure: test for and move config.status pieces from
21072 * configure: Test for existance of files before trying to mv
21084 has been reconfigured for a different host. This change
21088 * configure: test for config.sub with "config.sub sun4" rather
21116 * configure: Add support for 'subdirs' variable, which is
21118 itself for subdirs, it just creates a Makefile for each subdir.
21119 * configure.texi: Document subdirs.
21146 newsos* to bsd (readline needs to check for newsos).
21192 * Makefile.in, configure.in: Add support for mmalloc library.
21196 * Makefile.in: add stmp dependencies for a few more things.
21213 * configure: added test for conflicting configuration in srcdir,
21215 gets cranky. use relative paths for configure and srcdir
21221 * Makefile.in: Fix libg++ rule to check for gcc directory
21229 * configure.texi: fixed a node pointer problem.
21241 for -site= option.
21247 * configure: when building Makefile for crosses, replace
21249 config.sub. remove "for host in hosts" and "for target in
21262 * configure.texi: remove most references to multiple hosts,
21272 * configure.texi: Explain better about .gdbinit and about
21281 * README: DOC.configure => cfg-paper.texi.
21326 (DEVO_SUPPORT): DOC.configure => cfg-paper.texi.
21345 look for sources in "..". Doing so breaks subdirectories that
21351 * cfg-paper.texi: some changes suggested by rms.
21365 * configure: added -V for version number option.
21369 * DOC.configure, cfg-paper.texi: revised, updated, and texinfo'd.
21370 renamed from DOC.configure to cfg-paper.texi.
21379 * configure.texi: new file, in progress.
21381 * Makefile.in: build info file and install the man page for
21398 * Makefile.in: revised install for dir.info.
21406 Make directories for info install. Build dir.info here then
21411 * Makefile.in: fix for bad directory tests.
21418 * Makefile.in: unwrapped some for loops so that parallel makes
21424 * configure: added PWD as a stand in for `pwd` (for speed). use