Lines Matching +refs:po +refs:mode +refs:map
243 * po/POTFILES.in:: `POTFILES.in' in `po/'
244 * po/LINGUAS:: `LINGUAS' in `po/'
245 * po/Makevars:: `Makevars' in `po/'
246 * po/Rules-*:: Extending `Makefile' in `po/'
263 * AM_PO_SUBDIRS:: AM_PO_SUBDIRS in `po.m4'
459 * A special mode for Emacs(1) which helps preparing these sets and
627 display currency figures in the native mode for each locale.
635 locales require time to be specified in 24-hour mode rather than
671 The letters PO in `.po' files means Portable Object, to distinguish it
724 | +----> msgmerge ------> LANG.po ---->--------' |
728 | +--- New LANG.po <--------------------'
738 tedious job can be done a little more comfortably using emacs PO mode,
781 The first time through, there is no `LANG.po' yet, so the `msgmerge'
783 `LANG.po', where LANG represents the target language. See *Note
794 While adding the translated messages into the `LANG.po' PO file, if
804 PO file, translators may use PO mode for initializing untranslated
825 time, so the translations carried by `LANG.po' are slowly fading out of
837 existing `LANG.po' file, by comparing it with a newer `PACKAGE.pot'
841 `msgmerge' comments out as obsolete, in `LANG.po', those already
849 `LANG.po' file offering translations for all strings.
924 the distribution for the `ABOUT-NLS' information file, for some `LL.po'
925 files, often kept together into some `po/' directory, or for an `intl/'
926 directory. Internationalized packages have usually many `LL.po' files,
982 translator. When using PO mode, very little has to be known about the
983 format details, as PO mode takes care of them for her.
1018 format, as PO mode fully takes care of quoting for her.
1021 managed by other GNU `gettext' tools, and PO mode does not provide
1025 meant for the translator, and PO mode gives her the full control she
1182 #: src/msgcmp.c:338 src/po-lex.c:699
1670 In PO mode, one set of features is meant more for the programmer than
1674 strings by other means, using any editor of his choice, PO mode makes
1681 The set of program sources, targeted by the PO mode commands describe
1709 candidate for translation (`po-tags-search').
1712 Mark the last string found with `_()' (`po-mark-translatable').
1717 management of these keywords (`po-select-mark-and-mark').
1720 The `,' (`po-tags-search') command searches for the next occurrence
1736 comments, or strings already marked with some keyword PO mode knows
1762 The `M-,' (`po-mark-translatable') command will mark the recently
1764 (`po-select-mark-and-mark') command will request that you type one
1773 PO mode, or any other window changing command from Emacs, to break out
1784 that PO mode has to _know_ all your possible keywords, and that it will
1802 There is no provision in PO mode, currently, for deleting a known
1848 useful for `msgfmt' to test all the strings in the `.po' file. This
1854 only a heuristic. In the `.po' file the entry is marked using the
1880 would prevent translating the `.po' file. The method to prevent this
2038 major hassle for translators using GNU Emacs or XEmacs with po-mode.
2132 `xgettext' creates a file named `DOMAINNAME.po'. You should then
2168 searched relative to this list of directories. The resulting `.po'
2179 Use `NAME.po' for output (instead of `messages.po').
2183 Write output to specified file (instead of `NAME.po' or
2184 `messages.po').
2226 5.1.5 Operation mode
2407 `--force-po'
2412 Write the .po file using indented style.
2541 `LANG.po', as a copy of the `PACKAGE.pot' template file with
2550 $ cd po
2554 do so, the translator copies `PACKAGE.pot' to `LANG.po'. Then she
2668 to PO mode automatically (because it has recognized the file's suffix),
2669 you can disable it by typing `M-x fundamental-mode'.
2671 Modifying the header entry can already be done using PO mode: in
2672 Emacs, type `M-x po-mode RET' and then `RET' again to start editing the
2720 `http://www.iro.umontreal.ca/contrib/po/HTML/', in the "National
2854 msgmerge [OPTION] DEF.po REF.pot
2856 The `msgmerge' program merges two Uniforum style .po files together.
2857 The DEF.po file is an existing PO file with translations which will be
2870 `DEF.po'
2879 searched relative to this list of directories. The resulting `.po'
2888 7.1.2 Operation mode
2893 Update DEF.po. Do nothing if DEF.po is already up to date.
2907 7.1.4 Output file location in update mode
2910 The result is written back to DEF.po.
2913 Make a backup of DEF.po
2949 Apply REF.pot to each of the domains in DEF.po.
2976 `--force-po'
2981 Write the .po file using indented style.
3078 For those of you being the lucky users of Emacs, PO mode has been
3080 modifying PO files. While editing a PO file, PO mode allows for the
3088 For the beginning, besides main PO mode commands (*note Main PO
3120 installation, you might also want to make the PO mode available to your
3123 During the installation of the PO mode, you might want to modify your
3127 (setq auto-mode-alist
3128 (cons '("\\.po\\'\\|\\.po\\." . po-mode) auto-mode-alist))
3129 (autoload 'po-mode "po-mode" "Major mode for translators to edit PO files" t)
3131 Later, whenever you edit some `.po' file, or any file having the
3132 string `.po.' within its name, Emacs loads `po-mode.elc' (or
3133 `po-mode.el') as needed, and automatically activates PO mode commands
3134 for the associated buffer. The string _PO_ appears in the mode line
3135 for any buffer for which PO mode is active. Many PO files may be
3145 (modify-coding-system-alist 'file "\\.po\\'\\|\\.po\\."
3146 'po-find-file-coding-system)
3147 (autoload 'po-find-file-coding-system "po-mode")
3156 8.3.2 Main PO mode Commands
3160 Installation::, PO mode is activated for a window when Emacs finds a PO
3162 po-mode-map, which is a genuine Emacs mode, in a way that is not derived
3163 from text mode in any way. Functions found on `po-mode-hook', if any,
3166 When PO mode is active in a window, the letters `PO' appear in the
3167 mode line for that window. The mode line also displays how many
3169 `132t+3f+10u+2o' would tell the translator that the PO mode contains
3175 and the obsolete entries were deleted, the mode line would merely
3179 categories of subsequent sections. These allow for quitting PO mode or
3183 Undo last modification to the PO file (`po-undo').
3186 Quit processing and save the PO file (`po-quit').
3190 (`po-confirm-and-quit').
3193 Temporary leave the PO file window (`po-other-window').
3197 Show help about PO mode (`po-help').
3200 Give some PO file statistics (`po-statistics').
3203 Batch validate the format of the whole PO file (`po-validate').
3206 The command `_' (`po-undo') interfaces to the Emacs _undo_ facility.
3209 little more. For the purpose of undoing, each PO mode command is
3215 The commands `Q' (`po-quit') and `q' (`po-confirm-and-quit') are
3225 The command `0' (`po-other-window') is another, softer way, to leave
3226 PO mode, temporarily. It just moves the cursor to some other Emacs
3228 got PO mode to show some source context in some other, she might
3234 mode is then recovered.
3236 The command `h' (`po-help') displays a summary of all available PO
3237 mode commands. The translator should then type any character to resume
3238 normal PO mode operations. The command `?' has the same effect as `h'.
3240 The command `=' (`po-statistics') computes the total number of
3245 The command `V' (`po-validate') launches `msgfmt' in checking and
3246 verbose mode over the current PO file. This command first offers to
3249 PO mode uses the features of this program for checking the overall
3259 any PO mode action which would help correcting the error.
3270 cursor is found to be is said to be the current entry. Many PO mode
3275 Some PO mode commands alter the position of the cursor in a
3281 Redisplay the current entry (`po-current-entry').
3284 Select the entry after the current one (`po-next-entry').
3287 Select the entry before the current one (`po-previous-entry').
3290 Select the first entry in the PO file (`po-first-entry').
3293 Select the last entry in the PO file (`po-last-entry').
3297 (`po-push-location').
3300 Return to a previously saved entry location (`po-pop-location').
3304 (`po-exchange-location').
3308 select the current entry in PO mode, including commands which move by
3311 in PO mode, which usual Emacs commands moving the cursor do not
3312 especially try to enforce. The command `.' (`po-current-entry') has
3314 current entry has been changed by means external to PO mode, or the
3317 It is yet to be decided if PO mode helps the translator, or otherwise
3322 offered as a PO mode option that the translator might activate or
3330 The commands `n' (`po-next-entry') and `p' (`po-previous-entry')
3335 The commands `<' (`po-first-entry') and `>' (`po-last-entry') move
3337 cursor is located past the last entry in a PO file, most PO mode
3343 the PO mode for it to interactively fill an empty PO file from sources.
3353 PO mode offers another approach, by which cursor locations may be
3354 saved onto a special stack. The command `m' (`po-push-location')
3357 (`po-pop-location') consumes the top stack element and repositions the
3367 The command `x' (`po-exchange-location') simultaneously repositions
3384 backslashed escaped sequences. Some features of PO mode rely on the
3385 ability for PO mode to scan an already existing PO file for a
3387 if PO mode has internally all the built-in machinery for implementing
3393 under discussion, and PO mode experiments with a canonical
3394 representation. Having both `xgettext' and PO mode converging towards
3396 the internal normalization needed by PO mode could be automatically
3398 mode normalization should then be only necessary for PO files imported
3402 PO file needing a canonical representation, the following PO mode
3405 `M-x po-normalize'
3409 The special command `M-x po-normalize', which has no associated
3416 speeding up `msgid' string lookup for some other PO mode commands.
3418 `M-x po-normalize' presently makes three passes over the entries.
3440 Right now, in PO mode, strings are single line or multi-line. A
3489 Find the next translated entry (`po-next-translated-entry').
3493 (`po-previous-translated-entry').
3496 The commands `t' (`po-next-translated-entry') and `T'
3497 (`po-previous-translated-entry') move forwards or backwards, chasing
3503 the variable `po-auto-fuzzy-on-edit' is not `nil', the entry having
3538 Find the next fuzzy entry (`po-next-fuzzy-entry').
3541 Find the previous fuzzy entry (`po-previous-fuzzy-entry').
3544 Remove the fuzzy attribute of the current entry (`po-unfuzzy').
3547 The commands `z' (`po-next-fuzzy-entry') and `Z'
3548 (`po-previous-fuzzy-entry') move forwards or backwards, chasing for a
3552 The command `<TAB>' (`po-unfuzzy') removes the fuzzy attribute
3554 the variable `po-auto-select-on-unfuzzy' has not the `nil' value, the
3556 to work on. The initial value of `po-auto-select-on-unfuzzy' is `nil'.
3558 The initial value of `po-auto-fuzzy-on-edit' is `nil'. However, if
3559 the variable `po-auto-fuzzy-on-edit' is set to `t', any entry edited
3569 (`po-fade-out-entry') over any translated entry to mark it as being
3602 Find the next untranslated entry (`po-next-untranslated-entry').
3606 (`po-previous-untransted-entry').
3609 Turn the current entry into an untranslated one (`po-kill-msgstr').
3612 The commands `u' (`po-next-untranslated-entry') and `U'
3613 (`po-previous-untransted-entry') move forwards or backwards, chasing
3618 emptying its translation, using the command `k' (`po-kill-msgstr').
3651 Find the next obsolete entry (`po-next-obsolete-entry').
3654 Find the previous obsolete entry (`po-previous-obsolete-entry').
3658 (`po-fade-out-entry').
3661 The commands `o' (`po-next-obsolete-entry') and `O'
3662 (`po-previous-obsolete-entry') move forwards or backwards, chasing for
3666 PO mode does not provide ways for un-commenting an obsolete entry
3675 command `<DEL>' (`po-fade-out-entry') pushes the current entry a little
3685 PO mode, for those nights you are not sleepy. The idea would be that
3686 PO mode might become bright enough, one of these days, to make good
3691 Right now, PO mode completely lets the decision to the translator, when
3701 PO mode prevents direct modification of the PO file, by the usual means
3717 Interactively edit the translation (`po-edit-msgstr').
3722 (`po-msgid-to-msgstr').
3726 (`po-kill-msgstr').
3730 (`po-kill-ring-save-msgstr').
3734 (`po-yank-msgstr').
3737 The command `<RET>' (`po-edit-msgstr') opens a new Emacs window
3747 The command `<LFD>' (`po-msgid-to-msgstr') initializes, or
3754 `po-auto-edit-with-msgid' to `t', the translation gets initialised with
3756 for `po-auto-edit-with-msgid' is `nil'.
3769 The command `k' (`po-kill-msgstr') merely empties the translation
3772 kill ring. The command `w' (`po-kill-ring-save-msgstr') has also the
3786 To facilitate exchanges with buffers which are not in PO mode, the
3793 The command `y' (`po-yank-msgstr') completely replaces the
3807 have. Further, if the entry is obsolete, PO mode then appropriately
3814 the kill ring, as almost any PO mode command replacing translation
3872 Interactively edit the translator comments (`po-edit-comment').
3876 (`po-kill-comment').
3880 (`po-kill-ring-save-comment').
3884 (`po-yank-comment').
3887 These commands parallel PO mode commands for modifying the
3894 The command `#' (`po-edit-comment') opens a new Emacs window
3896 entry. If there are no such comments, PO mode understands that the
3905 Functions found on `po-subedit-mode-hook', if any, are executed after
3908 The command `K' (`po-kill-comment') gets rid of all translator
3910 `W' (`po-kill-ring-save-comment') takes a copy of the translator
3912 entry. The command `Y' (`po-yank-comment') completely replaces the
3944 The PO subedit minor mode has a few peculiarities worth being described
3949 Complete edition (`po-subedit-exit').
3952 Abort edition (`po-subedit-abort').
3955 Consult auxiliary PO files (`po-subedit-cycle-auxiliary').
3961 (`po-subedit-exit') may be used to return the edited translation into
3968 (`po-subedit-abort') to merely get rid of edition, while preserving the
3973 The command `C-c C-a' (`po-subedit-cycle-auxiliary') allows for
3980 Functions found on `po-subedit-mode-hook', if any, are executed after
3990 On exiting the editing window with `C-c C-c', PO mode automatically
4023 PO mode is particularly powerful when used with PO files created
4055 them (`po-cycle-source-reference').
4059 (`po-select-source-reference').
4063 (`po-consider-source-path').
4067 (`po-ignore-source-path').
4070 The commands `s' (`po-cycle-source-reference') and `M-s'
4071 (`po-select-source-reference') both open another window displaying some
4093 no other commands intervening, PO mode will cycle to the next available
4112 mode in which directory normally sits the genuine PO file. Many such
4115 (`po-consider-source-path') is used to interactively enter a new
4117 (`po-ignore-source-path') is used to select, with completion, one of
4126 PO mode is able to help the knowledgeable translator, being fluent in
4138 Here are the auxiliary file commands available in PO mode.
4142 (`po-cycle-auxiliary').
4145 Switch to a particular auxiliary file (`po-select-auxiliary').
4149 (`po-consider-as-auxiliary').
4153 (`po-ignore-as-auxiliary').
4156 Command `A' (`po-consider-as-auxiliary') adds the current PO file to
4158 (`po-ignore-as-auxiliary' just removes it.
4160 The command `a' (`po-cycle-auxiliary') seeks all auxiliary PO files,
4169 The command `C-c C-a' (`po-select-auxiliary') asks the translator
4180 proper behaviour of the auxiliary file commands of PO mode. This is not
4184 However, PO files initially created by PO mode itself, while marking
4187 between PO mode and other GNU `gettext' tools get fully resolved, the
4224 msgcat -o compendium.po file1.po file2.po
4228 visible decorated; calling `msgcat' on `file1.po':
4235 and `file2.po':
4248 "#-#-#-#-# file1.po #-#-#-#-#\n"
4250 "#-#-#-#-# file2.po #-#-#-#-#\n"
4262 msgcat --use-first -o compendium.po file1.po file2.po
4278 msggrep --location src/getopt.c -o compendium.po file.po
4295 msgmerge --compendium compendium.po -o file.po /dev/null file.pot
4304 msgcat --use-first -o update.po compendium1.po compendium2.po file.po
4305 msgmerge update.po file.pot | sed -e '/^#~/d' > file.po
4420 searched relative to this list of directories. The resulting `.po'
4480 `--force-po'
4485 Write the .po file using indented style.
4564 searched relative to this list of directories. The resulting `.po'
4607 `--force-po'
4612 Write the .po file using indented style.
4690 searched relative to this list of directories. The resulting `.po'
4812 `--force-po'
4816 Write the .po file using indented style.
4893 searched relative to this list of directories. The resulting `.po'
4961 file. Thus, it can be used to convert an `sr.po' file to an
4962 `sr@latin.po' file.
4985 `--force-po'
4989 Write the .po file using indented style.
5079 searched relative to this list of directories. The resulting `.po'
5132 `--force-po'
5137 Write the .po file using indented style.
5227 searched relative to this list of directories. The resulting `.po'
5279 `--force-po'
5284 Write the .po file using indented style.
5352 msgcmp [OPTION] DEF.po REF.pot
5354 The `msgcmp' program compares two Uniforum style .po files to check
5355 that both contain the same set of msgid strings. The DEF.po file is an
5365 `DEF.po'
5382 Apply REF.pot to each of the domains in DEF.po.
5385 Consider fuzzy messages in the DEF.po file like translated
5391 Consider untranslated messages in the DEF.po file like translated
5440 searched relative to this list of directories. The resulting `.po'
5535 `--force-po'
5540 Write the .po file using indented style.
5625 searched relative to this list of directories. The resulting `.po'
5658 `--force-po'
5663 Write the .po file using indented style.
5766 searched relative to this list of directories. The resulting `.po'
5811 The functions are declared in the header file `<gettext-po.h>', and
5939 msgfmt [OPTION] FILENAME.po ...
5947 `FILENAME.po ...'
5952 searched relative to this list of directories. The resulting `.po'
5958 10.1.2 Operation mode
5963 Java mode: generate a Java `ResourceBundle' class.
5969 C# mode: generate a .NET .dll file containing a subclass of
5973 C# resources mode: generate a .NET `.resources' file.
5976 Tcl mode: generate a tcl/msgcat `.msg' file.
5979 Qt mode: generate a Qt `.qm' file.
5993 file is the same as the domain name. If the strict Uniforum mode
5998 by default this mode is _not_ selected.
6003 10.1.4 Output file location in Java mode
6024 10.1.5 Output file location in C# mode
6045 10.1.6 Output file location in Tcl mode
6178 Uniforum style .po file.
6180 10.2.1 Operation mode
6185 Java mode: input is a Java `ResourceBundle' class.
6188 C# mode: input is a .NET .dll file containing a subclass of
6192 C# resources mode: input is a .NET `.resources' file.
6195 Tcl mode: input is a tcl/msgcat `.msg' file.
6207 10.2.3 Input file location in Java mode
6225 10.2.4 Input file location in C# mode
6246 10.2.5 Input file location in Tcl mode
6276 `--force-po'
6281 Write the .po file using indented style.
7404 `N_' is a short form similar to `_'. The `Makefile' in the `po/'
8132 In a second step, she uses the PO mode to translate precisely this
8167 $ msguniq $HOME/gettextlogused > missing.po
8175 $ sed -n -e 's,^domain "\(.*\)"$,\1,p' < missing.po | sort | uniq
8185 She takes the latest copy of `$lang.po' from the Translation Project,
8186 or from the package (in most cases, `$package/po/$lang.po'), or creates
8193 $ msggrep --domain=$domain missing.po | grep -v '^domain' \
8194 > $domain-missing.po
8195 $ msgattrib --set-obsolete --ignore-file $domain-missing.po $domain.$lang.po \
8196 > $domain.$lang-urgent.po
8198 The she translates `$domain.$lang-urgent.po' by use of a PO file
8205 $ msgmerge --no-fuzzy-matching $domain.$lang-urgent.po $package/po/$domain.pot \
8206 > $domain.$lang.po
8208 Then she can submit `$domain.$lang.po' and proceed to the next
8301 tool and the `Makefile's in the `intl/' and `po/' therefore know
8322 * Your `po/' directory should receive all PO files submitted to you
8323 by the translator teams, each having `LL.po' as a name. This is
8338 PO files in `po/' for distribution.
8452 2. A `po/' directory is created for eventually holding all
8454 `po/Makefile.in.in' from the GNU `gettext' distribution (beware
8456 the `po/' directory already exists, it will be preserved along
8487 GNU `gettext' facilities in one package go in `intl/', `po/' and `m4/'
8540 * po/POTFILES.in:: `POTFILES.in' in `po/'
8541 * po/LINGUAS:: `LINGUAS' in `po/'
8542 * po/Makevars:: `Makevars' in `po/'
8543 * po/Rules-*:: Extending `Makefile' in `po/'
8555 File: gettext.info, Node: po/POTFILES.in, Next: po/LINGUAS, Prev: Adjusting Files, Up: Adjustin…
8557 13.4.1 `POTFILES.in' in `po/'
8560 The `po/' directory should receive a file named `POTFILES.in'. This
8584 recommended to list in `po/POTFILES.in' the real source file (ending in
8589 File: gettext.info, Node: po/LINGUAS, Next: po/Makevars, Prev: po/POTFILES.in, Up: Adjusting Fi…
8591 13.4.2 `LINGUAS' in `po/'
8594 The `po/' directory should also receive a file named `LINGUAS'. This
8615 not Emacs in `M-x shell' mode).
8621 `po/' directory. You can copy them from GNU gettext's `po/' directory;
8625 File: gettext.info, Node: po/Makevars, Next: po/Rules-*, Prev: po/LINGUAS, Up: Adjusting Files
8627 13.4.3 `Makevars' in `po/'
8630 The `po/' directory also has a file named `Makevars'. It contains
8631 variables that are specific to your project. `po/Makevars' gets
8632 inserted into the `po/Makefile' when the latter is created. The
8637 a single message domain and, accordingly, a single `po/' directory.
8638 Only packages which have multiple `po/' directories at different
8643 File: gettext.info, Node: po/Rules-*, Next: configure.in, Prev: po/Makevars, Up: Adjusting Files
8645 13.4.4 Extending `Makefile' in `po/'
8648 All files called `Rules-*' in the `po/' directory get appended to the
8649 `po/Makefile' when it is created. They present an opportunity to add
8651 with `po/Makefile.in.in'.
8654 building catalogs `en@quot.po' and `en@boldquot.po'. The effect of
8655 `en@quot.po' is that people who set their `LANGUAGE' environment
8659 catalog, simply add `en@quot' to the `po/LINGUAS' file. The effect of
8660 `en@boldquot.po' is that people who set `LANGUAGE' to `en@boldquot'
8664 similarly add `en@boldquot' to the `po/LINGUAS' file.
8672 File: gettext.info, Node: configure.in, Next: config.guess, Prev: po/Rules-*, Up: Adjusting Fil…
8720 AC_OUTPUT([EXISTING CONFIGURATION FILES intl/Makefile po/Makefile.in],
8724 substitution in the `intl/' and `po/' directories. Note the `.in'
8725 suffix used for `po/' only. This is because the distributed file
8726 is really `po/Makefile.in.in'.
8802 `longdouble.m4', `longlong.m4', `nls.m4', `po.m4', `printf-posix.m4',
8807 `lib-ld.m4', `lib-link.m4', `lib-prefix.m4', `nls.m4', `po.m4',
8900 you also process the subdirectories `intl' and `po'. Special
8914 SUBDIRS = doc intl lib src po
8922 `po/Makefile' will later assume that the proper directory has been
9133 * AM_PO_SUBDIRS:: AM_PO_SUBDIRS in `po.m4'
9146 `po/' directories of the package for building.
9269 13.5.5 AM_PO_SUBDIRS in `po.m4'
9272 The `AM_PO_SUBDIRS' macro prepares the `po/' directories of the package
9282 variables in each `po/' directory.
9392 `po/Makefile.in.in' autoinstalled by `gettextize' or `autopoint'.
9504 The name `autopoint' is an abbreviation of `auto-po-intl-m4'; the
9505 tool copies or updates mostly files in the `po', `intl', `m4'
9522 $ (cd po; make update-po)
9542 Internationalized packages have usually many `LL.po' files. Unless
9634 which is sometimes performed using the Emacs PO mode (*note
9637 `po-mode.el'.
9669 language. The Emacs PO mode marking supports other languages, and the
9992 `XGETTEXT_OPTIONS' variable in `po/Makevars' (*note po/Makevars::)
9997 `po/Makefile.in.in'. It is recommended to make one `xgettext'
10084 po-mode marking
10138 po-mode marking
10382 *Operation mode*
10400 In normal operation mode, standard input is copied to standard
10536 po-mode marking
10586 po-mode marking
10638 po-mode marking
10687 po-mode marking
10735 po-mode marking
10785 po-mode marking
10838 po-mode marking
10889 po-mode marking
11057 po-mode marking
11268 po-mode marking
11304 `{$mode delphi}' or `{$mode objfpc}'
11320 po-mode marking
11378 po-mode marking
11426 po-mode marking
11477 po-mode marking
11575 po-mode marking
12231 po-mode marking
12281 po-mode marking
12330 po-mode marking
12358 `pot', `po'
12454 mode, occurred in July 1995, and was numbered 0.7. Other people
12471 Franc,ois also wrote PO mode in June 1995 with the collaboration of
14416 this when it starts in an interactive mode:
15526 * --force-po, msgattrib option: msgattrib Invocation.
15528 * --force-po, msgcat option: msgcat Invocation. (line 94)
15529 * --force-po, msgcomm option: msgcomm Invocation. (line 84)
15530 * --force-po, msgconv option: msgconv Invocation. (line 64)
15531 * --force-po, msgen option: msgen Invocation. (line 60)
15532 * --force-po, msgfilter option: msgfilter Invocation.
15534 * --force-po, msggrep option: msggrep Invocation. (line 143)
15535 * --force-po, msgmerge option: msgmerge Invocation. (line 129)
15536 * --force-po, msgunfmt option: msgunfmt Invocation. (line 108)
15537 * --force-po, msguniq option: msguniq Invocation. (line 81)
15538 * --force-po, xgettext option: xgettext Invocation. (line 265)
16106 * LANGUAGE, environment variable <1>: po/Rules-*. (line 11)
16169 * installing PO mode: Installation. (line 13)
16205 * po-auto-edit-with-msgid, PO Mode variable: Modifying Translations.
16207 * po-auto-fuzzy-on-edit, PO Mode variable: Translated Entries.
16209 * po-auto-select-on-unfuzzy, PO Mode variable: Fuzzy Entries. (line 44)
16210 * po-confirm-and-quit, PO Mode command: Main PO Commands. (line 62)
16211 * po-consider-as-auxiliary, PO Mode command: Auxiliary. (line 36)
16212 * po-consider-source-path, PO Mode command: C Sources Context.
16214 * po-current-entry, PO Mode command: Entry Positioning. (line 46)
16215 * po-cycle-auxiliary, PO Mode command: Auxiliary. (line 40)
16216 * po-cycle-source-reference, PO Mode command: C Sources Context.
16218 * po-edit-comment, PO Mode command: Modifying Comments. (line 46)
16219 * po-edit-msgstr, PO Mode command: Modifying Translations.
16221 * po-exchange-location, PO Mode command: Entry Positioning. (line 106)
16222 * po-fade-out-entry, PO Mode command <1>: Obsolete Entries. (line 47)
16223 * po-fade-out-entry, PO Mode command: Fuzzy Entries. (line 60)
16224 * po-first-entry, PO Mode command: Entry Positioning. (line 74)
16225 * po-help, PO Mode command: Main PO Commands. (line 83)
16226 * po-ignore-as-auxiliary, PO Mode command: Auxiliary. (line 36)
16227 * po-ignore-source-path, PO Mode command: C Sources Context. (line 89)
16228 * po-kill-comment, PO Mode command: Modifying Comments. (line 60)
16229 * po-kill-msgstr, PO Mode command <1>: Modifying Translations.
16231 * po-kill-msgstr, PO Mode command: Untranslated Entries.
16233 * po-kill-ring-save-comment, PO Mode command: Modifying Comments.
16235 * po-kill-ring-save-msgstr, PO Mode command: Modifying Translations.
16237 * po-last-entry, PO Mode command: Entry Positioning. (line 74)
16238 * po-mark-translatable, PO Mode command: Marking. (line 98)
16239 * po-msgid-to-msgstr, PO Mode command: Modifying Translations.
16241 * po-next-entry, PO Mode command: Entry Positioning. (line 69)
16242 * po-next-fuzzy-entry, PO Mode command: Fuzzy Entries. (line 39)
16243 * po-next-obsolete-entry, PO Mode command: Obsolete Entries. (line 36)
16244 * po-next-translated-entry, PO Mode command: Translated Entries.
16246 * po-next-untranslated-entry, PO Mode command: Untranslated Entries.
16248 * po-normalize, PO Mode command: Normalizing. (line 31)
16249 * po-other-window, PO Mode command: Main PO Commands. (line 72)
16250 * po-pop-location, PO Mode command: Entry Positioning. (line 92)
16251 * po-previous-entry, PO Mode command: Entry Positioning. (line 69)
16252 * po-previous-fuzzy-entry, PO Mode command: Fuzzy Entries. (line 39)
16253 * po-previous-obsolete-entry, PO Mode command: Obsolete Entries.
16255 * po-previous-translated-entry, PO Mode command: Translated Entries.
16257 * po-previous-untransted-entry, PO Mode command: Untranslated Entries.
16259 * po-push-location, PO Mode command: Entry Positioning. (line 92)
16260 * po-quit, PO Mode command: Main PO Commands. (line 62)
16261 * po-select-auxiliary, PO Mode command: Auxiliary. (line 49)
16262 * po-select-mark-and-mark, PO Mode command: Marking. (line 98)
16263 * po-select-source-reference, PO Mode command: C Sources Context.
16265 * po-statistics, PO Mode command: Main PO Commands. (line 87)
16266 * po-subedit-abort, PO Mode command: Subedit. (line 27)
16267 * po-subedit-cycle-auxiliary, PO Mode command: Subedit. (line 35)
16268 * po-subedit-exit, PO Mode command: Subedit. (line 20)
16269 * po-subedit-mode-hook, PO Mode variable: Modifying Comments. (line 57)
16270 * po-tags-search, PO Mode command: Marking. (line 56)
16271 * po-undo, PO Mode command: Main PO Commands. (line 53)
16272 * po-unfuzzy, PO Mode command: Fuzzy Entries. (line 44)
16273 * po-validate, PO Mode command: Main PO Commands. (line 92)
16274 * po-yank-comment, PO Mode command: Modifying Comments. (line 60)
16275 * po-yank-msgstr, PO Mode command: Modifying Translations.
16291 * subedit minor mode: Subedit. (line 6)
16386 * C# mode, and msgfmt program: msgfmt Invocation. (line 36)
16387 * C# mode, and msgunfmt program: msgunfmt Invocation. (line 19)
16388 * C# resources mode, and msgfmt program: msgfmt Invocation. (line 40)
16389 * C# resources mode, and msgunfmt program: msgunfmt Invocation.
16482 * file format, .po: PO Files. (line 6)
16483 * files, .po and .mo: Files. (line 6)
16537 * Java mode, and msgfmt program: msgfmt Invocation. (line 30)
16538 * Java mode, and msgunfmt program: msgunfmt Invocation. (line 16)
16559 * LINGUAS file: po/LINGUAS. (line 6)
16590 * Makefile.in.in extensions: po/Rules-*. (line 6)
16591 * Makevars file: po/Makevars. (line 6)
16705 * PO mode (Emacs) commands: Main PO Commands. (line 6)
16719 * POTFILES.in file: po/POTFILES.in. (line 6)
16730 * Qt mode, and msgfmt program: msgfmt Invocation. (line 46)
16732 * quotation marks <1>: po/Rules-*. (line 11)
16769 * Tcl mode, and msgfmt program: msgfmt Invocation. (line 43)
16770 * Tcl mode, and msgunfmt program: msgunfmt Invocation. (line 26)
16773 * testing .po files for equivalence: xgettext Invocation. (line 317)
16906 Node: po/POTFILES.in344099
16907 Node: po/LINGUAS345345
16908 Node: po/Makevars347034
16909 Node: po/Rules-*347782