Lines Matching full:added
46 * 06-08-00 01.00.02 Added _PAGEVERSION definitions for all pages.
47 * Added FcPhLowestVersion, FcPhHighestVersion, Reserved2
52 * Added _RESPONSE_ID_MASK definition to SCSI_PORT_1
54 * Added Information field and _INFO_PARAMS_NEGOTIATED
58 * Added BucketsRemaining to LAN_1 page, redefined the
62 * 06-30-00 01.00.04 Added MaxReplySize to LAN_1 page and updated the page
68 * Added Manufacturing pages, IO Unit Page 2, SCSI SPI
73 * 01-09-01 01.01.05 Added defines for page address formats.
79 * New fields added to FC Port Page 0 and some flags
82 * Added FC Port pages 6 and 7.
83 * 01-25-01 01.01.06 Added MaxInitiators field to FcPortPage0.
85 * Added some LinkType defines for FcPortPage0.
89 * Added definitions and structures for IOC Page 2 and
91 * 03-27-01 01.01.10 Added CONFIG_PAGE_FC_PORT_8 and CONFIG_PAGE_FC_PORT_9.
93 * Added VendorId and ProductRevLevel fields to
97 * Added structure offset comments.
98 * 04-09-01 01.01.11 Added some new defines for the PageAddress field and
100 * Added IO Unit Page 3.
104 * Added SepID and SepBus to RVP2 IMPhysicalDisk struct.
105 * Added defines for the SEP bits in RVP2 VolumeSettings.
108 * Added defines for SES, SAF-TE, and cross channel for
113 * Added define for MPI_CONFIG_PAGEATTR_RO_PERSISTENT.
115 * Added defines for MPI_FCPORTPAGE1_FLAGS_HARD_ALPA_ONLY
121 * Added defines for MPI_SCSIDEVPAGE1_CONF_WDTR_DISALLOWED
123 * Added OnBusTimerValue to CONFIG_PAGE_SCSI_PORT_1.
124 * Added rejected bits to SCSI Device Page 0 Information.
129 * Added structures for Manufacturing Page 4, IO Unit
132 * 10-04-01 01.02.04 Added define for MPI_CONFIG_PAGETYPE_RAID_PHYSDISK.
136 * Added generic defines for hot spare pools and RAID
138 * 11-01-01 01.02.05 Added define for MPI_IOUNITPAGE1_DISABLE_IR.
139 * 03-14-02 01.02.06 Added PCISlotNum field to CONFIG_PAGE_IOC_1 along with
141 * 05-31-02 01.02.07 Added a Flags field to CONFIG_PAGE_IOC_2_RAID_VOL in a
142 * reserved byte and added a define.
143 * Added define for
145 * Added new config page: CONFIG_PAGE_IOC_5.
146 * Added MaxAliases, MaxHardAliases, and NumCurrentAliases
148 * Added AltConnector and NumRequestedAliases fields to
150 * Added new config page: CONFIG_PAGE_FC_PORT_10.
151 * 07-12-02 01.02.08 Added more MPI_MANUFACTPAGE_DEVID_ defines.
152 * Added additional MPI_SCSIDEVPAGE0_NP_ defines.
153 * Added more MPI_SCSIDEVPAGE1_RP_ defines.
154 * Added define for
156 * Added new config page: CONFIG_PAGE_SCSI_DEVICE_3.
158 * 09-16-02 01.02.09 Added MPI_SCSIDEVPAGE1_CONF_FORCE_PPR_MSG define.
159 * 11-15-02 01.02.10 Added ConnectedID defines for CONFIG_PAGE_SCSI_PORT_0.
160 * Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
161 * Added more Flags defines for CONFIG_PAGE_FC_DEVICE_0.
162 * 04-01-03 01.02.11 Added RR_TOV field and additional Flags defines for
164 * Added define MPI_FCPORTPAGE5_FLAGS_DISABLE to disable
166 * Added more device id defines.
167 * 06-26-03 01.02.12 Added MPI_IOUNITPAGE1_IR_USE_STATIC_VOLUME_ID define.
168 * Added TargetConfig and IDConfig fields to
170 * Added more PortFlags defines for CONFIG_PAGE_SCSI_PORT_2
172 * Added more Flags defines for CONFIG_PAGE_FC_PORT_1.
175 * Added MPI_FC_DEVICE_PAGE0_PROT_FCP_RETRY define.
176 * 01-16-04 01.02.13 Added InitiatorDeviceTimeout and InitiatorIoPendTimeout
178 * Added define for
180 * Added new fields to the substructures of
182 * 04-29-04 01.02.14 Added define for IDP bit for CONFIG_PAGE_SCSI_PORT_0,
186 * 05-11-04 01.03.01 Added structure for CONFIG_PAGE_INBAND_0.
189 * Added a new structure for extended config page header.
190 * Added new extended config pages types and structures for
199 * Added IO Unit Page 4.
200 * Added EEDP Flags settings to IOC Page 1.
201 * Added new BIOS Page 1 config page.
202 * 10-05-04 01.05.02 Added define for
204 * Added new Flags field to CONFIG_PAGE_MANUFACTURING_5 and
206 * Added more defines for SAS IO Unit Page 0
208 * Added define for MPI_SAS_IOUNIT0_DS_SUBTRACTIVE_LINK
210 * Added defines for Physical Mapping Modes to SAS IO Unit
212 * Added define for
214 * 10-27-04 01.05.03 Added defines for new SAS PHY page addressing mode.
215 * Added defines for MaxTargetSpinUp to BIOS Page 1.
216 * Added 5 new ControlFlags defines for SAS IO Unit
218 * Added MaxNumPhysicalMappedIDs field to SAS IO Unit
220 * Added AccessStatus field to SAS Device Page 0 and added
222 * 12-07-04 01.05.04 Added config page structures for BIOS Page 2, RAID
226 * Added DataScrubRate and ResyncRate to RAID Volume
228 * Added MPI_SAS_IOUNIT2_FLAGS_RESERVE_ID_0_FOR_BOOT
230 * 12-09-04 01.05.05 Added Target Mode Large CDB Enable to FC Port Page 1
232 * Added Auto Port Config flag define for SAS IOUNIT
234 * Added Disabled bad Phy define to Expander Page 1
236 * Added SAS/SATA device support to SAS IOUnit Page 1
238 * Added Unsupported device to SAS Dev Page 0 Flags field
239 * Added disable use SATA Hash Address for SAS IOUNIT
241 * 01-15-05 01.05.06 Added defaults for data scrub rate and resync rate to
243 * Added new defines for BIOS Page 1 IOCSettings field.
244 * Added ExtDiskIdentifier field to RAID Physical Disk
246 * Added new defines for SAS IO Unit Page 1 ControlFlags
248 * Added defines and structures for the new Log Page 0, a
250 * 02-09-05 01.05.07 Added InactiveStatus field to RAID Volume Page 0.
251 * Added WWID field to RAID Volume Page 1.
252 * Added PhysicalPort field to SAS Expander pages 0 and 1.
254 * Added Enclosure/Slot boot device format to BIOS Page 2.
258 * Added Inactive Volume Member flag RAID Physical Disk
261 * Added CONFIG_PAGE_SAS_ENCLOSURE_0.
262 * Added Slot and Enclosure fields to SAS Device Page 0.
263 * 06-24-05 01.05.09 Added EEDP defines to IOC Page 1.
264 * Added more RAID type defines to IOC Page 2.
265 * Added Port Enable Delay settings to BIOS Page 1.
266 * Added Bad Block Table Full define to RAID Volume Page 0.
267 * Added Previous State defines to RAID Physical Disk
269 * Added Max Sata Targets define for DiscoveryStatus field
271 * Added Device Self Test to Control Flags of SAS IO Unit
273 * Added Direct Attach Starting Slot Number define for SAS
275 * Added new fields in SAS Device Page 2 for enclosure
277 * Added OwnerDevHandle and Flags field to SAS PHY Page 0.
278 * Added IOC GPIO Flags define to SAS Enclosure Page 0.
282 * Added MPI_IOUNITPAGE1_SATA_WRITE_CACHE_DISABLE bit.
283 * Added NumDevsPerEnclosure field to SAS IO Unit page 2.
284 * Added MPI_SAS_IOUNIT2_FLAGS_HOST_ASSIGNED_PHYS_MAP
286 * Added EnclosureHandle field to SAS Expander page 0.
289 * 08-30-05 01.05.11 Added DeviceID for FC949E and changed the DeviceID for
291 * Added more defines for Manufacturing Page 4 Flags field.
292 * Added more defines for IOCSettings and added
294 * Added postpone SATA Init bit to SAS IO Unit Page 1
297 * 03-27-06 01.05.12 Added two new Flags defines for Manufacturing Page 4.
298 * Added Manufacturing Page 7.
299 * Added MPI_IOCPAGE2_CAP_FLAGS_RAID_64_BIT_ADDRESSING.
300 * Added IOC Page 6.
301 * Added PrevBootDeviceForm field to CONFIG_PAGE_BIOS_2.
302 * Added MaxLBAHigh field to RAID Volume Page 0.
303 * Added Nvdata version fields to SAS IO Unit Page 0.
304 * Added AdditionalControlFlags, MaxTargetPortConnectTime,
307 * 10-11-06 01.05.13 Added NumForceWWID field and ForceWWID array to
309 * Added Manufacturing pages 8 through 10.
310 * Added defines for supported metadata size bits in
312 * Added defines for metadata size bits in VolumeSettings
314 * Added SATA Link Reset settings, Enable SATA Asynchronous
318 * Added defines for Enclosure Devices Unmapped and
321 * Added more AccessStatus values for SAS Device Page 0.
322 * Added bit for SATA Asynchronous Notification Support in
324 * 02-28-07 01.05.14 Added ExtFlags field to Manufacturing Page 4.
325 * Added Disable SMART Polling for CapabilitiesFlags of
327 * Added Disable SMART Polling to DeviceSettings of BIOS
329 * Added Multi-Port Domain bit for DiscoveryStatus field
331 * Added Multi-Port Domain Illegal flag for SAS IO Unit
333 * 05-24-07 01.05.15 Added Hide Physical Disks with Non-Integrated RAID
335 * Added Internal Connector to End Device Present bit to
339 * 08-07-07 01.05.16 Added MPI_IOCPAGE6_CAP_FLAGS_MULTIPORT_DRIVE_SUPPORT
341 * Added BIOS Page 4 structure.
342 * Added MPI_RAID_PHYS_DISK1_PATH_MAX define for RAID
344 * 01-15-07 01.05.17 Added additional bit defines for ExtFlags field of
346 * Added Solid State Drives Supported bit to IOC Page 6
348 * Added new value for AccessStatus field of SAS Device
353 * 07-11-08 01.05.19 Added defines MPI_MANPAGE4_EXTFLAGS_RAID0_SINGLE_DRIVE
356 * Added defines for a new bit in BIOS Page 1 BiosOptions
358 * Added BootDeviceWaitTime field to SAS IO Unit Page 2.
359 * Added MPI_SAS_PHY0_PHYINFO_PHY_VACANT for use in PhyInfo